diff --git a/.github/workflows/printer-linter-pr-diagnose.yml b/.github/workflows/printer-linter-pr-diagnose.yml
index b218ebe623..881ea1df3e 100644
--- a/.github/workflows/printer-linter-pr-diagnose.yml
+++ b/.github/workflows/printer-linter-pr-diagnose.yml
@@ -52,7 +52,7 @@ jobs:
                     path: printer-linter-result/
 
             -   name: Run clang-tidy-pr-comments action
-                uses: platisd/clang-tidy-pr-comments@master
+                uses: platisd/clang-tidy-pr-comments@fix_suggestions_for_multiline_comments
                 with:
                     github_token: ${{ secrets.GITHUB_TOKEN }}
                     clang_tidy_fixes: result.yml
diff --git a/.github/workflows/printer-linter-pr-post.yml b/.github/workflows/printer-linter-pr-post.yml
index 3c3879b046..6a79714e59 100644
--- a/.github/workflows/printer-linter-pr-post.yml
+++ b/.github/workflows/printer-linter-pr-post.yml
@@ -73,7 +73,7 @@ jobs:
                     unzip printer-linter-result.zip -d printer-linter-result
 
             -   name: Run clang-tidy-pr-comments action
-                uses: platisd/clang-tidy-pr-comments@master
+                uses: platisd/clang-tidy-pr-comments@fix_suggestions_for_multiline_comments
                 with:
                     github_token: ${{ secrets.GITHUB_TOKEN }}
                     clang_tidy_fixes: printer-linter-result/fixes.yml
diff --git a/printer-linter/src/printerlinter/linters/defintion.py b/printer-linter/src/printerlinter/linters/defintion.py
index d684cd98e9..b0201976be 100644
--- a/printer-linter/src/printerlinter/linters/defintion.py
+++ b/printer-linter/src/printerlinter/linters/defintion.py
@@ -45,24 +45,17 @@ class Definition(Linter):
                 if is_redefined:
                     redefined = re.compile(r'.*(\"' + key + r'\"[\s\:\S]*?)\{[\s\S]*?\},?')
                     found = redefined.search(self._content)
-                    # TODO: Figure out a way to support multiline fixes in the PR review GH Action, for now suggest no fix to ensure no ill-formed json are created
-                    #  see: https://github.com/platisd/clang-tidy-pr-comments/issues/37
-                    if len(found.group().splitlines()) > 1:
-                        replacements = []
-                    else:
-                        replacements = [Replacement(
-                            file = self._file,
-                            offset = found.span(1)[0],
-                            length = len(found.group()),
-                            replacement_text = "")]
-
                     yield Diagnostic(
                         file = self._file,
                         diagnostic_name = "diagnostic-definition-redundant-override",
                         message = f"Overriding {key} with the same value ({value}) as defined in parent definition: {definition['inherits']}",
                         level = "Warning",
                         offset = found.span(0)[0],
-                        replacements = replacements
+                        replacements = [Replacement(
+                            file = self._file,
+                            offset = found.span(1)[0],
+                            length = len(found.group()),
+                            replacement_text = "")]
                     )
 
     def _loadDefinitionFiles(self, definition_file) -> None:
diff --git a/resources/definitions/SV01.def.json b/resources/definitions/SV01.def.json
index bd7773de6f..81af2793dc 100644
--- a/resources/definitions/SV01.def.json
+++ b/resources/definitions/SV01.def.json
@@ -1,66 +1,65 @@
-{
-    "version": 2,
-    "name": "Sovol-SV01",
-    "inherits": "fdmprinter",
-    "metadata": {
-        "visible": true,
-        "author": "Sovol",
-        "manufacturer": "Sovol 3D",
-        "file_formats": "text/x-gcode",
-        "has_variants": false,
-        "has_machine_quality": false,
-        "preferred_quality_type": "draft",
-        "machine_extruder_trains": {
-            "0": "SV01_extruder_0"
-        }
-    },
-
-    "overrides": {
-        "machine_name": { "default_value": "SV01" },
-        "machine_extruder_count": { "default_value": 1 },
-        "machine_width": { "default_value": 280 },
-        "machine_depth": { "default_value": 260 },
-        "machine_height": { "default_value": 300 },	
-        "machine_max_feedrate_x": { "value": 500 },
-        "machine_max_feedrate_y": { "value": 500 },
-        "machine_max_feedrate_z": { "value": 10 },
-        "machine_max_feedrate_e": { "value": 50 },
-        "machine_max_acceleration_x": { "value": 500 },
-        "machine_max_acceleration_y": { "value": 500 },
-        "machine_max_acceleration_z": { "value": 100 },
-        "machine_max_acceleration_e": { "value": 5000 },
-        "machine_acceleration": { "value": 500 },
-        "machine_max_jerk_xy": { "value": 10 },
-        "machine_max_jerk_z": { "value": 0.4 },
-        "machine_max_jerk_e": { "value": 5 },
-        "machine_heated_bed": { "default_value": true },
-        "material_diameter": { "default_value": 1.75 },
-        "acceleration_print": { "value": 500 },
-        "acceleration_travel": { "value": 500 },
-        "acceleration_travel_layer_0": { "value": "acceleration_travel" },
-        "acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
-        "jerk_print": { "value": 8 },
-        "jerk_travel": { "value": "jerk_print" },
-        "jerk_travel_layer_0": { "value": "jerk_travel" },
-        "acceleration_enabled": { "value": false },
-        "jerk_enabled": { "value": false },
-        "speed_print": { "value": 50.0 } ,
-        "skirt_brim_speed": { "value": "speed_layer_0" },
-        "optimize_wall_printing_order": { "value": "True" },
-        "material_initial_print_temperature": { "value": "material_print_temperature" },
-        "material_final_print_temperature": { "value": "material_print_temperature" },
-        "z_seam_type": { "value": "'back'" },
-        "z_seam_corner": { "value": "'z_seam_corner_weighted'" },
-        "infill_pattern": { "value": "'lines'" },
-        "infill_before_walls": { "value": false },
-        "infill_overlap": { "value": 30.0 },
-        "skin_overlap": { "value": 10.0 },
-        "infill_wipe_dist": { "value": 0.0 },
-        "wall_0_wipe_dist": { "value": 0.0 },      
-        "retraction_amount": { "default_value": 3},
-        "retraction_speed": { "default_value": 50},
-        "adhesion_type": { "value": "'skirt'" },
-        "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
-        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X0 Y240 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" }
-    }
-}
+{
+    "version": 2,
+    "name": "Sovol-SV01",
+    "inherits": "fdmprinter",
+    "metadata":
+    {
+        "visible": true,
+        "author": "Sovol",
+        "manufacturer": "Sovol 3D",
+        "file_formats": "text/x-gcode",
+        "has_machine_quality": false,
+        "has_variants": false,
+        "machine_extruder_trains": { "0": "SV01_extruder_0" },
+        "preferred_quality_type": "draft"
+    },
+    "overrides":
+    {
+        "acceleration_enabled": { "value": false },
+        "acceleration_print": { "value": 500 },
+        "acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
+        "acceleration_travel": { "value": 500 },
+        "acceleration_travel_layer_0": { "value": "acceleration_travel" },
+        "adhesion_type": { "value": "'skirt'" },
+        "infill_before_walls": { "value": false },
+        "infill_overlap": { "value": 30.0 },
+        "infill_pattern": { "value": "'lines'" },
+        "infill_wipe_dist": { "value": 0.0 },
+        "jerk_enabled": { "value": false },
+        "jerk_print": { "value": 8 },
+        "jerk_travel": { "value": "jerk_print" },
+        "jerk_travel_layer_0": { "value": "jerk_travel" },
+        "machine_acceleration": { "value": 500 },
+        "machine_depth": { "default_value": 240 },
+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X0 Y240 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
+        "machine_extruder_count": { "default_value": 1 },
+        "machine_heated_bed": { "default_value": true },
+        "machine_height": { "default_value": 300 },
+        "machine_max_acceleration_e": { "value": 5000 },
+        "machine_max_acceleration_x": { "value": 500 },
+        "machine_max_acceleration_y": { "value": 500 },
+        "machine_max_acceleration_z": { "value": 100 },
+        "machine_max_feedrate_e": { "value": 50 },
+        "machine_max_feedrate_x": { "value": 500 },
+        "machine_max_feedrate_y": { "value": 500 },
+        "machine_max_feedrate_z": { "value": 10 },
+        "machine_max_jerk_e": { "value": 5 },
+        "machine_max_jerk_xy": { "value": 10 },
+        "machine_max_jerk_z": { "value": 0.4 },
+        "machine_name": { "default_value": "SV01" },
+        "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
+        "machine_width": { "default_value": 280 },
+        "material_diameter": { "default_value": 1.75 },
+        "material_final_print_temperature": { "value": "material_print_temperature" },
+        "material_initial_print_temperature": { "value": "material_print_temperature" },
+        "optimize_wall_printing_order": { "value": "True" },
+        "retraction_amount": { "default_value": 3 },
+        "retraction_speed": { "default_value": 50 },
+        "skin_overlap": { "value": 10.0 },
+        "skirt_brim_speed": { "value": "speed_layer_0" },
+        "speed_print": { "value": 50.0 },
+        "wall_0_wipe_dist": { "value": 0.0 },
+        "z_seam_corner": { "value": "'z_seam_corner_weighted'" },
+        "z_seam_type": { "value": "'back'" }
+    }
+}
\ No newline at end of file
diff --git a/resources/definitions/SV02.def.json b/resources/definitions/SV02.def.json
index ab2ad8439e..57245e8e68 100644
--- a/resources/definitions/SV02.def.json
+++ b/resources/definitions/SV02.def.json
@@ -1,82 +1,82 @@
-{
-    "version": 2,
-    "name": "Sovol-SV02",
-    "inherits": "fdmprinter",
-    "metadata": {
-        "visible": true,
-        "author": "Sovol",
-        "manufacturer": "Sovol 3D",
-        "file_formats": "text/x-gcode",
-        "has_variants": false,
-        "has_machine_quality": false,
-        "preferred_quality_type": "draft",
-        "machine_extruder_trains": {
-            "0": "SV02_extruder_0",
-            "1": "SV02_extruder_1"
-        }
-    },
-    
-    "overrides": {
-        "machine_name": { "default_value": "SV02" },
-        "machine_extruder_count": { "default_value": 2 },
-        "machine_heated_bed": { "default_value": true },
-        "machine_width": { "default_value": 300 },
-        "machine_depth": { "default_value": 250	},
-        "machine_height": { "default_value": 300 },
-        "machine_center_is_zero": { "default_value": false },
-        "retraction_amount": { "default_value": 5},
-        "retraction_speed": { "default_value": 50},
-        "gantry_height": { "value": "30" },
-        "speed_print": { "default_value": 50 },		
-	    "default_material_print_temperature": { "value": 195 },
-        "material_initial_print_temperature": { "value": "material_print_temperature" },
-        "material_final_print_temperature": { "value": 195 },		
-        "machine_max_feedrate_x": { "value": 500 },
-        "machine_max_feedrate_y": { "value": 500 },
-        "machine_max_feedrate_z": { "value": 10 },
-        "machine_max_feedrate_e": { "value": 50 },
-        "machine_max_acceleration_x": { "value": 500 },
-        "machine_max_acceleration_y": { "value": 500 },
-        "machine_max_acceleration_z": { "value": 100 },
-        "machine_max_acceleration_e": { "value": 500 },
-        "machine_acceleration": { "value": 500 },
-
-        "material_diameter": { "default_value": 1.75 },
-
-        "acceleration_print": { "value": 500 },
-        "acceleration_travel": { "value": 500 },
-        "acceleration_travel_layer_0": { "value": "acceleration_travel" },
-        "jerk_print": { "value": 8 },
-        "jerk_travel": { "value": "jerk_print" },
-        "jerk_travel_layer_0": { "value": "jerk_travel" },
-        "acceleration_enabled": { "value": false },
-        "jerk_enabled": { "value": false },
-        "machine_max_jerk_xy": { "default_value": 5.0 },
-        "machine_max_jerk_z": { "default_value": 0.4 },
-        "machine_max_jerk_e": { "default_value": 5.0 },
-        "prime_tower_position_x": { "value": "240" },
-        "prime_tower_position_y": { "value": "190" },
-        "prime_tower_size": { "value": "30" },
-        "prime_tower_wipe_enabled": { "default_value": true },
-        "prime_tower_min_volume": { "value":  "((resolveOrValue('prime_tower_size') * 0.5) ** 2 * 3.14159 * resolveOrValue('layer_height'))/2"},
-        "travel_retract_before_outer_wall": { "default_value": true },
-        "infill_sparse_density": { "value": "15" },
-        "infill_pattern": { "value": "'lines'" },
-        "infill_before_walls": { "value": false },
-        "infill_overlap": { "value": 30.0 },
-        "skin_overlap": { "value": 10.0 },
-        "infill_wipe_dist": { "value": 0.0 },
-        "wall_0_wipe_dist": { "value": 0.0 },
-        "adhesion_type": { "value": "'skirt'" },
-        "brim_replaces_support": { "value": false },
-        "skirt_gap": { "value": 2 },
-        "skirt_line_count": { "value": 3 },
-        "adhesion_extruder_nr": { "value": 1 },
-        "brim_width": { "value": 4 },
-        "coasting_enable": { "default_value": true },
-        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
-        "machine_start_gcode": { "default_value": "G21 ;metric values\nG28 ;home all\nG90 ;absolute positioning\nM107 ;start with the fan off\nG1 F2400 Z15.0 ;raise the nozzle 15mm\nM109 S{material_print_temperature} ;Set Extruder Temperature and Wait\nM190 S{material_bed_temperature}; Wait for bed temperature to reach target temp\nT0 ;Switch to Extruder 1\nG1 F3000 X5 Y10 Z0.2 ;move to prime start position\nG92 E0 ;reset extrusion distance\nG1 F600 X160 E5 ;prime nozzle in a line\nG1 F5000 X180 ;quick wipe\nG92 E0 ;reset extrusion distance" },
-        "machine_end_gcode": { "default_value": "M104 S0  ;hotend off\nM140 S0  ;bed off\nG92 E0\nG1 F2000 E-100  ;retract filament 100mm\nG92 E0\nG1 F3000 X0 Y240  ;move bed for easy part removal\nM84  ;disable steppers" },
-        "top_bottom_thickness": { "default_value": 1 }
-    }
-}
+{
+    "version": 2,
+    "name": "Sovol-SV02",
+    "inherits": "fdmprinter",
+    "metadata":
+    {
+        "visible": true,
+        "author": "Sovol",
+        "manufacturer": "Sovol 3D",
+        "file_formats": "text/x-gcode",
+        "has_machine_quality": false,
+        "has_variants": false,
+        "machine_extruder_trains":
+        {
+            "0": "SV02_extruder_0",
+            "1": "SV02_extruder_1"
+        },
+        "preferred_quality_type": "draft"
+    },
+    "overrides":
+    {
+        "acceleration_enabled": { "value": false },
+        "acceleration_print": { "value": 500 },
+        "acceleration_travel": { "value": 500 },
+        "acceleration_travel_layer_0": { "value": "acceleration_travel" },
+        "adhesion_extruder_nr": { "value": 1 },
+        "adhesion_type": { "value": "'skirt'" },
+        "brim_replaces_support": { "value": false },
+        "brim_width": { "value": 4 },
+        "coasting_enable": { "default_value": true },
+        "default_material_print_temperature": { "value": 195 },
+        "gantry_height": { "value": "30" },
+        "infill_before_walls": { "value": false },
+        "infill_overlap": { "value": 30.0 },
+        "infill_pattern": { "value": "'lines'" },
+        "infill_sparse_density": { "value": "15" },
+        "infill_wipe_dist": { "value": 0.0 },
+        "jerk_enabled": { "value": false },
+        "jerk_print": { "value": 8 },
+        "jerk_travel": { "value": "jerk_print" },
+        "jerk_travel_layer_0": { "value": "jerk_travel" },
+        "machine_acceleration": { "value": 500 },
+        "machine_center_is_zero": { "default_value": false },
+        "machine_depth": { "default_value": 240 },
+        "machine_end_gcode": { "default_value": "M104 S0  ;hotend off\nM140 S0  ;bed off\nG92 E0\nG1 F2000 E-100  ;retract filament 100mm\nG92 E0\nG1 F3000 X0 Y240  ;move bed for easy part removal\nM84  ;disable steppers" },
+        "machine_extruder_count": { "default_value": 2 },
+        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
+        "machine_heated_bed": { "default_value": true },
+        "machine_height": { "default_value": 300 },
+        "machine_max_acceleration_e": { "value": 500 },
+        "machine_max_acceleration_x": { "value": 500 },
+        "machine_max_acceleration_y": { "value": 500 },
+        "machine_max_acceleration_z": { "value": 100 },
+        "machine_max_feedrate_e": { "value": 50 },
+        "machine_max_feedrate_x": { "value": 500 },
+        "machine_max_feedrate_y": { "value": 500 },
+        "machine_max_feedrate_z": { "value": 10 },
+        "machine_max_jerk_e": { "default_value": 5.0 },
+        "machine_max_jerk_xy": { "default_value": 5.0 },
+        "machine_max_jerk_z": { "default_value": 0.4 },
+        "machine_name": { "default_value": "SV02" },
+        "machine_start_gcode": { "default_value": "G21 ;metric values\nG28 ;home all\nG90 ;absolute positioning\nM107 ;start with the fan off\nG1 F2400 Z15.0 ;raise the nozzle 15mm\nM109 S{material_print_temperature} ;Set Extruder Temperature and Wait\nM190 S{material_bed_temperature}; Wait for bed temperature to reach target temp\nT0 ;Switch to Extruder 1\nG1 F3000 X5 Y10 Z0.2 ;move to prime start position\nG92 E0 ;reset extrusion distance\nG1 F600 X160 E5 ;prime nozzle in a line\nG1 F5000 X180 ;quick wipe\nG92 E0 ;reset extrusion distance" },
+        "machine_width": { "default_value": 280 },
+        "material_diameter": { "default_value": 1.75 },
+        "material_final_print_temperature": { "value": 195 },
+        "material_initial_print_temperature": { "value": "material_print_temperature" },
+        "prime_tower_min_volume": { "value": "((resolveOrValue('prime_tower_size') * 0.5) ** 2 * 3.14159 * resolveOrValue('layer_height'))/2" },
+        "prime_tower_position_x": { "value": "240" },
+        "prime_tower_position_y": { "value": "190" },
+        "prime_tower_size": { "value": "30" },
+        "prime_tower_wipe_enabled": { "default_value": true },
+        "retraction_amount": { "default_value": 5 },
+        "retraction_speed": { "default_value": 50 },
+        "skin_overlap": { "value": 10.0 },
+        "skirt_gap": { "value": 2 },
+        "skirt_line_count": { "value": 3 },
+        "speed_print": { "default_value": 50 },
+        "top_bottom_thickness": { "default_value": 1 },
+        "travel_retract_before_outer_wall": { "default_value": true },
+        "wall_0_wipe_dist": { "value": 0.0 }
+    }
+}
\ No newline at end of file
diff --git a/resources/definitions/ankermake_m5.def.json b/resources/definitions/ankermake_m5.def.json
new file mode 100644
index 0000000000..c09cb7579e
--- /dev/null
+++ b/resources/definitions/ankermake_m5.def.json
@@ -0,0 +1,69 @@
+{
+    "version": 2,
+    "name": "AnkerMake M5",
+    "inherits": "fdmprinter",
+    "metadata":
+    {
+        "visible": true,
+        "author": "just-trey",
+        "manufacturer": "AnkerMake",
+        "file_formats": "text/x-gcode",
+        "platform": "ankermake_m5_platform.obj",
+        "has_machine_quality": true,
+        "machine_extruder_trains": { "0": "ankermake_m5_extruder_0" },
+        "platform_texture": "ankermake_m5.png",
+        "preferred_material": "generic_pla",
+        "preferred_quality_type": "normal"
+    },
+    "overrides":
+    {
+        "acceleration_print": { "value": "2500" },
+        "adhesion_type": { "default_value": "skirt" },
+        "cool_min_layer_time": { "value": 6 },
+        "cool_min_speed": { "value": 30 },
+        "gantry_height": { "value": 25 },
+        "machine_depth": { "default_value": 235 },
+        "machine_end_gcode": { "default_value": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84" },
+        "machine_heated_bed": { "default_value": true },
+        "machine_height": { "default_value": 250 },
+        "machine_name": { "default_value": "AnkerMake M5" },
+        "machine_start_gcode": { "default_value": "M104 S{material_print_temperature_layer_0} ; set final nozzle temp\nM190 S{material_bed_temperature_layer_0} ; set and wait for nozzle temp to stabilize\nM109 S{material_print_temperature_layer_0} ; wait for nozzle temp to stabilize\nG28 ;Home\nG1 E10 F3600; push out retracted filament(fix for over retraction after prime)" },
+        "machine_width": { "default_value": 235 },
+        "material_bed_temperature": { "maximum_value_warning": "110" },
+        "material_bed_temperature_layer_0":
+        {
+            "maximum_value_warning": "110",
+            "value": "material_bed_temperature + 5"
+        },
+        "material_diameter": { "default_value": 1.75 },
+        "material_flow_layer_0": { "value": 120 },
+        "material_print_temperature": { "maximum_value_warning": "260" },
+        "material_print_temperature_layer_0":
+        {
+            "maximum_value_warning": "260",
+            "value": "material_print_temperature + 5"
+        },
+        "retraction_amount": { "default_value": 1.5 },
+        "retraction_combing": { "value": "infill" },
+        "retraction_speed": { "default_value": 70 },
+        "skin_monotonic": { "default_value": true },
+        "speed_infill": { "maximum_value_warning": 255 },
+        "speed_print":
+        {
+            "maximum_value_warning": 255,
+            "value": 250.0
+        },
+        "speed_topbottom": { "value": 150.0 },
+        "speed_travel": { "value": 250.0 },
+        "speed_wall":
+        {
+            "maximum_value_warning": 255,
+            "value": 150.0
+        },
+        "speed_wall_x":
+        {
+            "maximum_value_warning": 255,
+            "value": 250.0
+        }
+    }
+}
\ No newline at end of file
diff --git a/resources/definitions/fusion3.def.json b/resources/definitions/fusion3.def.json
new file mode 100644
index 0000000000..30c5b6ce93
--- /dev/null
+++ b/resources/definitions/fusion3.def.json
@@ -0,0 +1,161 @@
+{
+    "version": 2,
+    "name": "Fusion3 Base Printer",
+    "inherits": "fdmprinter",
+    "metadata":
+    {
+        "visible": false,
+        "author": "Keith Varin",
+        "manufacturer": "Fusion3Design",
+        "file_formats": "text/x-gcode",
+        "exclude_materials": [
+            "bestfilament_abs_skyblue",
+            "bestfilament_petg_orange",
+            "bestfilament_pla_green",
+            "chromatik_pla",
+            "dsm_arnitel2045_175",
+            "dsm_novamid1070_175",
+            "emotiontech_abs",
+            "emotiontech_absx",
+            "emotiontech_acetate",
+            "emotiontech_asax",
+            "emotiontech_bvoh",
+            "emotiontech_copa",
+            "emotiontech_hips",
+            "emotiontech_nylon_1030",
+            "emotiontech_nylon_1030cf",
+            "emotiontech_nylon_1070",
+            "emotiontech_pc",
+            "emotiontech_pekk",
+            "emotiontech_petg",
+            "emotiontech_pla",
+            "emotiontech_pla_hr_870",
+            "emotiontech_pva-m",
+            "emotiontech_pva-s",
+            "emotiontech_tpu98a",
+            "eryone_petg",
+            "eryone_pla",
+            "eryone_pla_glow",
+            "eryone_pla_matte",
+            "eryone_pla_wood",
+            "eSUN_PETG_Black",
+            "eSUN_PETG_Grey",
+            "eSUN_PETG_Purple",
+            "Extrudr_GreenTECPro_Anthracite_175",
+            "Extrudr_GreenTECPro_Black_175",
+            "Extrudr_GreenTECPro_Blue_175",
+            "Extrudr_GreenTECPro_Nature_175",
+            "Extrudr_GreenTECPro_Red_175",
+            "Extrudr_GreenTECPro_Silver_175",
+            "Extrudr_GreenTECPro_White_175",
+            "fabtotum_abs",
+            "fabtotum_nylon",
+            "fabtotum_pla",
+            "fabtotum_tpu",
+            "fdplast_abs_tomato",
+            "fdplast_petg_gray",
+            "fdplast_pla_olive",
+            "fiberlogy_hd_pla",
+            "filo3d_pla",
+            "filo3d_pla_green",
+            "filo3d_pla_red",
+            "generic_bam",
+            "generic_bvoh_175",
+            "generic_gffcpe",
+            "generic_gffpa",
+            "generic_hips",
+            "generic_hips_175",
+            "generic_pp",
+            "generic_pva",
+            "generic_pva_175",
+            "goofoo_abs",
+            "goofoo_asa",
+            "goofoo_bronze_pla",
+            "goofoo_emarble_pla",
+            "goofoo_esilk_pla",
+            "goofoo_hips",
+            "goofoo_pa",
+            "goofoo_pa_cf",
+            "goofoo_pc",
+            "goofoo_peek",
+            "goofoo_petg",
+            "goofoo_pla",
+            "goofoo_pva",
+            "goofoo_tpe_83a",
+            "goofoo_tpu_87a",
+            "goofoo_tpu_95a",
+            "goofoo_wood_pla",
+            "imade3d_petg_175",
+            "imade3d_pla_175",
+            "innofill_innoflex60_175",
+            "layer_one_black_pla",
+            "layer_one_dark_gray_pla",
+            "layer_one_white_pla",
+            "leapfrog_abs_natural",
+            "leapfrog_epla_natural",
+            "leapfrog_pva_natural",
+            "octofiber_pla",
+            "redd_abs",
+            "redd_asa",
+            "redd_hips",
+            "redd_nylon",
+            "redd_petg",
+            "redd_pla",
+            "redd_tpe",
+            "structur3d_dap100silicone",
+            "tizyx_abs",
+            "tizyx_flex",
+            "tizyx_petg",
+            "tizyx_pla",
+            "tizyx_pla_bois",
+            "tizyx_pva",
+            "verbatim_bvoh_175",
+            "Vertex_Delta_ABS",
+            "Vertex_Delta_PET",
+            "Vertex_Delta_PLA",
+            "Vertex_Delta_PLA_Glitter",
+            "Vertex_Delta_PLA_Mat",
+            "Vertex_Delta_PLA_Satin",
+            "Vertex_Delta_PLA_Wood",
+            "Vertex_Delta_TPU",
+            "volumic_abs_ultra",
+            "volumic_arma_ultra",
+            "volumic_asa_ultra",
+            "volumic_br80_ultra",
+            "volumic_bumper_ultra",
+            "volumic_cu80_ultra",
+            "volumic_flex93_ultra",
+            "volumic_medical_ultra",
+            "volumic_nylon_ultra",
+            "volumic_pekk_carbone",
+            "volumic_petgcarbone_ultra",
+            "volumic_petg_ultra",
+            "volumic_pla_ultra",
+            "volumic_pp_ultra",
+            "volumic_strong_ultra",
+            "volumic_support_ultra",
+            "xyzprinting_abs",
+            "xyzprinting_antibact_pla",
+            "xyzprinting_carbon_fiber",
+            "xyzprinting_colorinkjet_pla",
+            "xyzprinting_flexible",
+            "xyzprinting_metallic_pla",
+            "xyzprinting_nylon",
+            "xyzprinting_petg",
+            "xyzprinting_pla",
+            "xyzprinting_tough_pla",
+            "xyzprinting_tpu",
+            "zyyx_pro_flex",
+            "zyyx_pro_pla"
+        ],
+        "first_start_actions": [ "MachineSettingsAction" ],
+        "has_machine_quality": true,
+        "has_materials": true,
+        "has_variants": true,
+        "machine_extruder_trains": { "0": "fusion3_extruder_0" },
+        "preferred_material": "generic_abs",
+        "preferred_quality_type": "normal",
+        "preferred_variant_name": "0.4mm Nozzle",
+        "variants_name": "Nozzle Size"
+    }
+}
\ No newline at end of file
diff --git a/resources/definitions/fusion3_f410.def.json b/resources/definitions/fusion3_f410.def.json
new file mode 100644
index 0000000000..091a8f7ac5
--- /dev/null
+++ b/resources/definitions/fusion3_f410.def.json
@@ -0,0 +1,138 @@
+{
+    "version": 2,
+    "name": "Fusion3 F410",
+    "inherits": "fusion3",
+    "metadata":
+    {
+        "visible": true,
+        "quality_definition": "fusion3"
+    },
+    "overrides":
+    {
+        "acceleration_print": { "value": "machine_acceleration" },
+        "acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
+        "acceleration_travel": { "value": "machine_acceleration" },
+        "acceleration_travel_layer_0": { "value": "acceleration_travel" },
+        "adaptive_layer_height_variation": { "value": 0.04 },
+        "adaptive_layer_height_variation_step": { "value": 0.04 },
+        "adhesion_type": { "value": "'skirt'" },
+        "bottom_layers": { "value": "math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))" },
+        "brim_replaces_support": { "value": false },
+        "cool_fan_full_at_height": { "value": "layer_height_0 * 4" },
+        "cool_min_speed": { "value": "speed_print * 0.3" },
+        "gantry_height": { "value": 40 },
+        "infill_before_walls": { "value": false },
+        "infill_overlap": { "value": 20.0 },
+        "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 89 else 'lines' if infill_sparse_density > 31 else 'cubic'" },
+        "infill_wipe_dist": { "value": 0.0 },
+        "jerk_print": { "value": 10 },
+        "jerk_travel": { "value": "jerk_print" },
+        "jerk_travel_layer_0": { "value": "jerk_travel" },
+        "machine_acceleration": { "value": 2000 },
+        "machine_depth": { "default_value": 355 },
+        "machine_end_gcode": { "default_value": "; Fusion3 F410 end code\nG91  ;relative positioning\nG1 E-5.00 F1000  ;retract 5mm of filament\nG1 Z+1.00 X-20.0 Y+20.0 F10000  ;short quick move to disengage from print\nG90  ;absolute positioning\nG1 X0.0 Y350.0 F9000  ; move head to back left corner\nG91  ; relative positioning\nG1 E-5.00 F500  ;retract additional filament to prevent oozing\nG90 ;absolute positioning\nM104 S0  ;turn off hotend\nM140 S0  ;turn off heatbed\n; Reset filament monitor\nM42 P63 S0\nG4 P100\nG4 P50\nM42 P63 S1\nG1 Z315 F1000 ;move print bed down to idle position\nM106 S0  ; shut off blower\nM84  ;motors off\nM561  ;clear bed probe transformation\n" },
+        "machine_gcode_flavor": { "default_value": "RepRap (RepRap)" },
+        "machine_head_with_fans_polygon":
+        {
+            "default_value": [
+                [-30, 30],
+                [-30, -30],
+                [30, -30],
+                [30, 30]
+            ]
+        },
+        "machine_heated_bed": { "default_value": true },
+        "machine_height": { "default_value": 315 },
+        "machine_max_acceleration_x": { "value": 5000 },
+        "machine_max_acceleration_y": { "value": 5000 },
+        "machine_max_acceleration_z": { "value": 500 },
+        "machine_max_feedrate_e": { "value": 166 },
+        "machine_max_feedrate_x": { "value": 550 },
+        "machine_max_feedrate_y": { "value": 550 },
+        "machine_max_feedrate_z": { "value": 40 },
+        "machine_max_jerk_e": { "value": 30 },
+        "machine_max_jerk_z": { "value": 1 },
+        "machine_name": { "default_value": "Fusion3 F410" },
+        "machine_start_gcode": { "default_value": "; Fusion3 F410 start code\nM104 S0 ; shutdown heater and prepare to print\nG21  ; set units to mm\nG90  ; use absolute coordinates\nT0  ; select tool 0\nG92 E0.0  ; reset e count\nM220 S100 ; reset speed multiplier\nM140 S{material_bed_temperature_layer_0}  ; set bed temp and do not wait\nG32  ; call to run bed.g\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nM109 S{material_print_temperature_layer_0} ; set print head temperature and wait\n; === pause for heating ===\n; reset filament monitor\nM42 P63 S0\nG4 P100\nG4 P50\nM42 P63 S1\nG1 X350 Y0\nG1 Z10.0 F2000  ; move up\nG1 E10.0 F500  ; prime extruder\nG92 E0.0  ; reset e count\nG1 X330 Y15 F9000  ; move back\nG1 Z{layer_height_0} F1000  ; move down to begin wipe\nG1 X150 E4.0 F6000  ; wipe print head (extrude material while we do this)\nG92 E0.0  ; reset e count\n" },
+        "machine_width": { "default_value": 355 },
+        "material_final_print_temperature": { "value": "material_print_temperature" },
+        "material_initial_print_temperature": { "value": "material_print_temperature" },
+        "meshfix_maximum_resolution": { "value": "0.25" },
+        "meshfix_maximum_travel_resolution": { "value": "meshfix_maximum_resolution" },
+        "minimum_interface_area": { "value": 10 },
+        "minimum_support_area": { "value": 2 },
+        "optimize_wall_printing_order": { "value": "True" },
+        "retract_at_layer_change": { "value": true },
+        "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" },
+        "retraction_combing_max_distance": { "value": 30 },
+        "retraction_count_max": { "value": 100 },
+        "retraction_extrusion_window": { "value": 5 },
+        "retraction_hop": { "value": 0.2 },
+        "retraction_hop_enabled": { "value": true },
+        "retraction_prime_speed":
+        {
+            "maximum_value": "machine_max_feedrate_e",
+            "maximum_value_warning": "machine_max_feedrate_e *0.75"
+        },
+        "retraction_retract_speed":
+        {
+            "maximum_value": "machine_max_feedrate_e",
+            "maximum_value_warning": "machine_max_feedrate_e *0.75"
+        },
+        "retraction_speed":
+        {
+            "default_value": 100,
+            "maximum_value": "machine_max_feedrate_e",
+            "maximum_value_warning": "machine_max_feedrate_e *0.75"
+        },
+        "skin_overlap": { "value": 10.0 },
+        "skirt_gap": { "value": 10.0 },
+        "skirt_line_count": { "value": 3 },
+        "speed_infill": { "value": "speed_print *0.7" },
+        "speed_layer_0": { "value": "speed_print *0.4" },
+        "speed_prime_tower": { "value": "speed_topbottom" },
+        "speed_print": { "value": 100 },
+        "speed_support": { "value": "speed_wall_0" },
+        "speed_support_interface": { "value": "speed_topbottom" },
+        "speed_travel": { "value": "speed_print * 1.5" },
+        "speed_travel_layer_0": { "value": "speed_travel *0.5" },
+        "speed_wall": { "value": "speed_print *0.6" },
+        "speed_wall_x": { "value": "speed_print *0.85" },
+        "speed_z_hop": { "value": 5 },
+        "support_angle": { "value": "math.floor(math.degrees(math.atan(line_width/2.0/layer_height)))" },
+        "support_brim_enable": { "value": true },
+        "support_brim_width": { "value": 4 },
+        "support_infill_angles":
+        {
+            "value": [
+                45
+            ]
+        },
+        "support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 30" },
+        "support_interface_density": { "value": 33.333 },
+        "support_interface_height": { "value": "layer_height * 4" },
+        "support_interface_pattern": { "value": "'grid'" },
+        "support_interface_skip_height": { "value": 0.2 },
+        "support_pattern": { "value": "'zigzag'" },
+        "support_use_towers": { "value": false },
+        "support_wall_count": { "value": 0 },
+        "support_xy_distance": { "value": "wall_line_width_0 * 3" },
+        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
+        "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
+        "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
+        "top_bottom_pattern": { "value": "'zigzag'" },
+        "top_bottom_pattern_0": { "value": "'zigzag'" },
+        "top_bottom_thickness":
+        {
+            "minimum_value_warning": "0.4",
+            "value": "(layer_height*3) + layer_height_0"
+        },
+        "top_layers": { "value": "math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))" },
+        "travel_avoid_other_parts": { "value": false },
+        "travel_avoid_supports": { "value": true },
+        "travel_retract_before_outer_wall": { "value": true },
+        "wall_0_wipe_dist": { "value": 0.0 },
+        "z_seam_corner": { "value": "'z_seam_corner_inner'" },
+        "z_seam_type": { "value": "'sharpest_corner'" }
+    }
+}
\ No newline at end of file
diff --git a/resources/extruders/ankermake_m5_extruder_0.def.json b/resources/extruders/ankermake_m5_extruder_0.def.json
new file mode 100644
index 0000000000..ec65e16d8c
--- /dev/null
+++ b/resources/extruders/ankermake_m5_extruder_0.def.json
@@ -0,0 +1,15 @@
+{
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata":
+    {
+        "machine": "ankermake_m5",
+        "position": "0"
+    },
+    "overrides":
+    {
+        "extruder_nr": { "default_value": 0 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}
\ No newline at end of file
diff --git a/resources/extruders/fusion3_extruder_0.def.json b/resources/extruders/fusion3_extruder_0.def.json
new file mode 100644
index 0000000000..4369308122
--- /dev/null
+++ b/resources/extruders/fusion3_extruder_0.def.json
@@ -0,0 +1,15 @@
+{
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata":
+    {
+        "machine": "fusion3",
+        "position": "0"
+    },
+    "overrides":
+    {
+        "extruder_nr": { "default_value": 0 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}
\ No newline at end of file
diff --git a/resources/images/ankermake_m5.png b/resources/images/ankermake_m5.png
new file mode 100644
index 0000000000..aec9697c9e
Binary files /dev/null and b/resources/images/ankermake_m5.png differ
diff --git a/resources/meshes/ankermake_m5_platform.obj b/resources/meshes/ankermake_m5_platform.obj
new file mode 100644
index 0000000000..d84dccafd6
--- /dev/null
+++ b/resources/meshes/ankermake_m5_platform.obj
@@ -0,0 +1,745 @@
+# Exported from 3D Builder
+mtllib D:\Documents\Projects\AnkerMake-M5-Profile\5.1\images\AM-M5-bed.mtl
+
+o Object.1
+v 121.092972 123.154205 -0.102764
+v 119.840958 123.932068 -0.102778
+v 119.840958 123.932068 0.097220
+v 121.092972 123.154205 0.097234
+v 78.657051 -126.525543 0.102253
+v 78.012062 -126.955132 0.102262
+v 78.012062 -126.955139 -0.097736
+v 78.657051 -126.525551 -0.097745
+v -75.704933 -141.014282 -0.097276
+v -75.352928 -141.851379 -0.097260
+v -75.352928 -141.851364 0.102738
+v -75.704933 -141.014282 0.102722
+v -74.881927 -142.616196 -0.097246
+v -74.881927 -142.616180 0.102752
+v 116.994965 124.874573 -0.102794
+v 118.468956 124.512222 -0.102788
+v 115.440956 125.000031 -0.102794
+v 122.205963 122.196655 -0.102746
+v 123.159973 121.079498 -0.102725
+v 123.935974 119.821854 -0.102701
+v 124.513977 118.444763 -0.102674
+v 124.874969 116.966278 -0.102645
+v 124.999969 115.405518 -0.102615
+v 79.364059 -126.202339 0.102246
+v 79.364059 -126.202347 -0.097752
+v -76.946938 -128.027161 0.102464
+v -76.946938 -128.027161 -0.097534
+v -76.547928 -128.674576 -0.097521
+v -76.547928 -128.674561 0.102477
+v 80.123062 -125.999588 0.102241
+v 80.123062 -125.999596 -0.097757
+v 80.924057 -125.929337 -0.097759
+v 80.924057 -125.929329 0.102239
+v 125.000061 -116.334778 -0.098002
+v 124.875061 -117.895561 -0.097971
+v -115.441032 124.999939 -0.102525
+v 75.924065 -140.114868 -0.097471
+v 75.924065 -140.114868 0.102527
+v 75.705070 -141.014221 0.102545
+v 75.705070 -141.014221 -0.097453
+v 74.301064 -143.294632 -0.097406
+v 74.301064 -143.294632 0.102592
+v 73.625069 -143.876816 -0.097394
+v 118.468956 124.512222 0.097210
+v 74.881050 -142.616135 -0.097420
+v 74.881050 -142.616135 0.102578
+v 116.994965 124.874573 0.097204
+v 75.353065 -141.851318 -0.097436
+v 75.353065 -141.851318 0.102562
+v 115.440956 125.000031 0.097204
+v 115.441055 -125.929314 0.102198
+v 115.441055 -125.929321 -0.097800
+v 116.995064 -125.803848 -0.097804
+v 116.995064 -125.803841 0.102194
+v 118.469055 -125.441521 -0.097813
+v 118.469055 -125.441513 0.102185
+v -124.999947 -116.334877 -0.097710
+v -125.000031 115.405426 0.097675
+v -125.000031 115.405418 -0.102323
+v 119.841057 -124.861359 -0.097826
+v 119.841057 -124.861351 0.102172
+v 121.093071 -124.082481 -0.097843
+v 121.093071 -124.082474 0.102155
+v -124.874954 -117.895653 0.102319
+v -124.513947 -119.374130 0.102348
+v -124.999947 -116.334869 0.102288
+v 124.514069 -119.374039 -0.097941
+v 123.936066 -120.751137 -0.097913
+v 123.160065 -122.008789 -0.097887
+v 122.206055 -123.124947 -0.097863
+v 122.206055 -123.124939 0.102135
+v 74.000061 -122.918182 -0.097811
+v -72.999939 -122.918236 -0.097640
+v 123.160065 -122.008789 0.102111
+v 123.936066 -120.751137 0.102085
+v -116.996040 124.874481 0.097477
+v -116.996040 124.874481 -0.102521
+v -118.469032 124.512131 -0.102512
+v -118.469032 124.512131 0.097486
+v 124.514069 -119.374039 0.102057
+v -119.841042 123.931976 -0.102499
+v -119.841042 123.931976 0.097499
+v 124.875061 -117.895561 0.102027
+v -121.094032 123.154114 -0.102482
+v -121.094032 123.154114 0.097516
+v 125.000061 -116.334778 0.101996
+v -122.207047 122.196564 -0.102462
+v -122.207047 122.196564 0.097537
+v -123.161026 121.079407 -0.102438
+v -123.161026 121.079407 0.097560
+v -123.936020 119.821762 -0.102412
+v -123.936020 119.821762 0.097586
+v 76.250061 -129.496536 -0.097683
+v 76.548050 -128.762833 -0.097698
+v 76.948059 -128.086334 -0.097712
+v -124.514038 118.444664 -0.102384
+v -124.514038 118.444672 0.097614
+v -124.875038 116.966179 -0.102354
+v -124.875038 116.966187 0.097644
+v 77.439056 -127.480080 -0.097724
+v 76.000069 -139.166367 0.102508
+v 76.000069 -139.166367 -0.097490
+v -115.441032 124.999939 0.097473
+v 76.000061 -131.083420 0.102347
+v 76.000061 -131.083420 -0.097651
+v -80.121941 -126.071922 0.102429
+v -80.922943 -126.007690 0.102429
+v -80.922943 -126.007698 -0.097569
+v -80.121941 -126.071930 -0.097569
+v 124.874969 116.966278 0.097353
+v 124.999969 115.405518 0.097383
+v 76.064056 -130.274429 0.102331
+v 76.064056 -130.274445 -0.097667
+v 124.513977 118.444763 0.097324
+v -79.363937 -126.258606 0.102432
+v -79.363937 -126.258614 -0.097566
+v 74.000069 -142.992523 -0.097412
+v 123.935974 119.821869 0.097297
+v 76.250061 -129.496536 0.102315
+v -78.656929 -126.557716 0.102437
+v -78.656929 -126.557724 -0.097561
+v 123.159973 121.079514 0.097273
+v 76.548050 -128.762817 0.102300
+v 122.205963 122.196655 0.097252
+v -78.011940 -126.959198 0.102444
+v -78.011940 -126.959206 -0.097554
+v 76.948059 -128.086319 0.102286
+v -77.438934 -127.452026 0.102454
+v -77.438934 -127.452034 -0.097544
+v 77.439056 -127.480072 0.102274
+v -74.301933 -143.294693 -0.097233
+v -74.301933 -143.294678 0.102765
+v -73.624931 -143.876877 -0.097222
+v -73.624931 -143.876862 0.102776
+v -88.022942 -125.929398 -0.097562
+v -121.093933 -124.082565 0.102437
+v -76.249939 -129.384201 -0.097507
+v -88.022942 -126.007698 -0.097561
+v -76.063942 -130.146011 -0.097492
+v -75.999939 -130.948990 -0.097476
+v -72.999931 -142.992584 -0.097240
+v 71.133072 -144.923676 -0.097370
+v 72.029060 -144.703873 -0.097375
+v 70.188072 -144.999969 -0.097367
+v 72.863068 -144.350555 -0.097383
+v -70.187927 -145.000031 -0.097204
+v -72.028931 -144.703934 -0.097207
+v -71.133934 -144.923737 -0.097204
+v -72.863922 -144.350616 -0.097213
+v -75.999931 -139.166428 -0.097313
+v -75.923935 -140.114929 -0.097294
+v 70.188072 -144.999969 0.102631
+v -70.187927 -145.000015 0.102794
+v 71.133072 -144.923676 0.102628
+v 72.029060 -144.703873 0.102623
+v 72.863068 -144.350555 0.102615
+v 73.625069 -143.876816 0.102604
+v -72.863922 -144.350601 0.102785
+v -72.028931 -144.703918 0.102791
+v -71.133934 -144.923721 0.102794
+v -115.440933 -125.929413 -0.097530
+v -116.995941 -125.803940 -0.097531
+v -118.468933 -125.441612 -0.097537
+v -119.840942 -124.861450 -0.097547
+v -121.093933 -124.082573 -0.097561
+v -122.206947 -123.125038 -0.097578
+v -123.160934 -122.008888 -0.097599
+v -123.935928 -120.751236 -0.097624
+v -124.513947 -119.374138 -0.097650
+v -124.874954 -117.895660 -0.097679
+v -76.249939 -129.384186 0.102491
+v -76.063942 -130.145996 0.102506
+v -75.999939 -130.948975 0.102522
+v -75.999931 -139.166428 0.102685
+v -88.022942 -125.929398 0.102436
+v -88.022942 -126.007698 0.102437
+v -123.935928 -120.751228 0.102374
+v -123.160934 -122.008881 0.102399
+v -122.206947 -123.125031 0.102420
+v -119.840942 -124.861443 0.102451
+v -118.468933 -125.441605 0.102461
+v -116.995941 -125.803932 0.102467
+v -115.440933 -125.929405 0.102468
+v -75.923935 -140.114929 0.102704
+
+usemtl Material.001_0
+f 1 2 3
+f 1 3 4
+f 18 1 4
+f 18 4 124
+f 19 18 124
+f 19 124 122
+f 20 19 122
+f 20 122 118
+f 21 20 118
+f 21 118 114
+f 22 21 114
+f 22 114 110
+f 23 22 110
+f 23 110 111
+f 23 111 34
+f 17 36 50
+f 15 17 50
+f 15 50 47
+f 16 15 47
+f 16 47 44
+f 2 16 44
+f 70 74 71
+f 62 70 71
+f 69 68 75
+f 69 75 74
+f 35 86 83
+f 67 35 83
+f 35 34 86
+f 67 83 80
+f 68 67 80
+f 68 80 75
+f 60 62 63
+f 60 63 61
+f 55 60 61
+f 55 61 56
+f 53 55 56
+f 53 56 54
+f 51 53 54
+f 51 33 52
+f 32 52 33
+f 32 33 30
+f 32 30 31
+f 120 116 121
+f 125 120 121
+f 125 121 126
+f 128 125 126
+f 128 126 129
+f 128 129 27
+f 128 27 26
+f 130 127 95
+f 130 95 100
+f 6 130 100
+f 6 100 7
+f 5 6 7
+f 5 7 8
+f 24 5 8
+f 24 8 25
+f 30 24 25
+f 106 107 108
+f 106 108 109
+f 115 106 109
+f 115 109 116
+f 76 77 78
+f 76 78 79
+f 91 97 92
+f 89 91 92
+f 96 98 99
+f 96 99 97
+f 165 136 179
+f 165 179 166
+f 168 167 178
+f 168 178 177
+f 169 168 177
+f 169 177 65
+f 170 169 65
+f 170 65 64
+f 66 170 64
+f 66 57 170
+f 58 57 66
+f 57 58 59
+f 163 180 164
+f 164 180 136
+f 163 181 180
+f 162 181 163
+f 162 182 181
+f 175 183 135
+f 175 135 138
+f 175 138 176
+f 107 176 138
+f 161 183 182
+f 161 182 162
+f 161 135 183
+f 98 59 58
+f 167 166 179
+f 164 136 165
+f 167 179 178
+f 98 58 99
+f 87 89 90
+f 87 90 88
+f 84 87 88
+f 84 88 85
+f 81 84 85
+f 81 85 82
+f 78 81 82
+f 91 96 97
+f 89 92 90
+f 36 76 103
+f 78 82 79
+f 108 107 138
+f 123 93 94
+f 127 123 94
+f 123 119 93
+f 119 113 93
+f 119 112 113
+f 112 105 113
+f 104 102 105
+f 104 101 102
+f 102 101 37
+f 38 37 101
+f 37 38 39
+f 37 39 40
+f 45 42 41
+f 41 42 43
+f 43 42 157
+f 43 157 156
+f 43 156 145
+f 143 154 142
+f 142 154 152
+f 142 152 144
+f 144 152 146
+f 172 139 140
+f 172 140 173
+f 39 49 48
+f 48 49 46
+f 146 153 160
+f 146 160 148
+f 148 160 159
+f 148 159 147
+f 147 158 149
+f 149 158 133
+f 134 133 158
+f 13 132 14
+f 10 13 14
+f 133 132 131
+f 9 10 11
+f 9 11 12
+f 151 9 12
+f 151 12 184
+f 151 184 174
+f 150 151 174
+f 140 150 174
+f 13 131 132
+f 10 14 11
+f 133 134 132
+f 147 159 158
+f 140 174 173
+f 171 139 172
+f 171 137 139
+f 29 137 171
+f 29 28 137
+f 26 28 29
+f 146 152 153
+f 143 155 154
+f 145 155 143
+f 145 156 155
+f 45 46 42
+f 48 46 45
+f 39 48 40
+f 112 104 105
+f 127 94 95
+f 26 27 28
+f 120 115 116
+f 36 77 76
+f 30 25 31
+f 51 52 53
+f 70 69 74
+f 62 71 63
+f 103 50 36
+f 86 34 111
+f 2 44 3
+
+vt -0.000000 0.964465
+vt 0.000000 0.106167
+vt 0.961764 1.000000
+vt 0.000500 0.100387
+vt 0.001944 0.094911
+vt 0.004256 0.089810
+vt 0.007360 0.085152
+vt 0.011176 0.081019
+vt 0.015628 0.077472
+vt 0.020636 0.074587
+vt 0.026124 0.072439
+vt 0.032020 0.071097
+vt 0.038236 0.070632
+vt 0.176304 0.070632
+vt 0.204000 0.081784
+vt 0.179508 0.070372
+vt 0.182544 0.069621
+vt 0.185372 0.068424
+vt 0.187952 0.066833
+vt 0.190244 0.064888
+vt 0.192208 0.062643
+vt 0.193808 0.060138
+vt 0.195000 0.057420
+vt 0.195744 0.054539
+vt 0.196000 0.051543
+vt 0.204000 0.007435
+vt 0.196000 0.021606
+vt 0.196304 0.018093
+vt 0.197180 0.014762
+vt 0.198588 0.011662
+vt 0.200476 0.008829
+vt 0.202796 0.006316
+vt 0.205500 0.004160
+vt 0.208548 0.002405
+vt 0.211884 0.001097
+vt 0.215468 0.000283
+vt 0.219248 0.000000
+vt 0.792000 0.007435
+vt 0.780752 0.000000
+vt 0.784536 0.000283
+vt 0.788116 0.001097
+vt 0.791456 0.002405
+vt 0.794500 0.004160
+vt 0.797208 0.006316
+vt 0.799528 0.008829
+vt 0.801412 0.011662
+vt 0.802820 0.014762
+vt 0.803696 0.018093
+vt 0.804000 0.021606
+vt 0.804000 0.052041
+vt 0.792000 0.081784
+vt 0.967984 0.999535
+vt 0.814628 0.068305
+vt 0.812048 0.066818
+vt 0.809756 0.064993
+vt 0.807788 0.062863
+vt 0.806192 0.060465
+vt 0.805000 0.057837
+vt 0.804256 0.055015
+vt 0.817456 0.069413
+vt 0.820488 0.070104
+vt 0.823692 0.070342
+vt 0.852092 0.070632
+vt 0.852092 0.070342
+vt 0.973876 0.998193
+vt 0.979364 0.996045
+vt 0.984376 0.993164
+vt 0.988828 0.989617
+vt 0.992644 0.985480
+vt 0.995744 0.980822
+vt 0.998056 0.975721
+vt 0.999500 0.970245
+vt 1.000000 0.964465
+vt 1.000000 0.106167
+vt 0.961764 0.070632
+vt 0.967984 0.071097
+vt 0.973876 0.072439
+vt 0.979364 0.074587
+vt 0.984376 0.077472
+vt 0.988828 0.081019
+vt 0.992644 0.085152
+vt 0.995744 0.089810
+vt 0.998056 0.094911
+vt 0.999500 0.100387
+vt 0.038236 1.000000
+vt 0.000500 0.970245
+vt 0.001944 0.975721
+vt 0.004256 0.980821
+vt 0.007360 0.985479
+vt 0.011176 0.989617
+vt 0.015628 0.993164
+vt 0.020636 0.996045
+vt 0.026124 0.998193
+vt 0.032020 0.999535
+
+usemtl Mat_0
+f 23/1 34/2 36/3
+f 17/85 23/1 36/3
+f 16/93 2/92 17/85
+f 62/9 36/3 70/8
+f 70/8 36/3 69/7
+f 69/7 36/3 68/6
+f 67/5 36/3 35/4
+f 68/6 36/3 67/5
+f 60/10 36/3 62/9
+f 32/14 31/16 72/15
+f 32/14 72/15 36/3
+f 72/15 73/51 36/3
+f 77/52 36/3 73/51
+f 77/52 73/51 121/53
+f 116/60 77/52 121/53
+f 77/52 109/61 108/62
+f 108/62 135/63 77/52
+f 77/52 135/63 78/65
+f 89/69 135/63 91/70
+f 91/70 135/63 96/71
+f 96/71 135/63 98/72
+f 57/74 165/79 166/80
+f 57/74 166/80 167/81
+f 168/82 57/74 167/81
+f 57/74 59/73 135/63
+f 135/63 161/75 57/74
+f 161/75 162/76 57/74
+f 162/76 163/77 57/74
+f 57/74 163/77 164/78
+f 170/84 57/74 169/83
+f 169/83 57/74 168/82
+f 57/74 164/78 165/79
+f 59/73 98/72 135/63
+f 87/68 135/63 89/69
+f 81/66 135/63 84/67
+f 84/67 135/63 87/68
+f 78/65 135/63 81/66
+f 138/64 135/63 108/62
+f 25/17 8/18 72/15
+f 7/19 72/15 8/18
+f 7/19 100/20 72/15
+f 95/21 72/15 100/20
+f 95/21 94/22 72/15
+f 93/23 72/15 94/22
+f 105/25 72/15 113/24
+f 72/15 105/25 117/26
+f 102/27 117/26 105/25
+f 117/26 37/28 40/29
+f 117/26 40/29 48/30
+f 117/26 48/30 45/31
+f 41/32 117/26 45/31
+f 43/33 145/34 117/26
+f 145/34 143/35 117/26
+f 142/36 117/26 143/35
+f 146/39 141/38 144/37
+f 117/26 144/37 141/38
+f 141/38 73/51 117/26
+f 141/38 140/50 73/51
+f 139/59 73/51 140/50
+f 147/41 141/38 148/40
+f 149/42 141/38 147/41
+f 10/46 141/38 13/45
+f 131/44 13/45 141/38
+f 133/43 131/44 141/38
+f 9/47 141/38 10/46
+f 150/49 141/38 151/48
+f 151/48 141/38 9/47
+f 133/43 141/38 149/42
+f 137/58 28/57 73/51
+f 28/57 27/56 73/51
+f 139/59 137/58 73/51
+f 140/50 141/38 150/49
+f 146/39 148/40 141/38
+f 144/37 117/26 142/36
+f 43/33 117/26 41/32
+f 117/26 102/27 37/28
+f 93/23 113/24 72/15
+f 27/56 129/55 73/51
+f 129/55 126/54 73/51
+f 77/52 116/60 109/61
+f 126/54 121/53 73/51
+f 72/15 117/26 73/51
+f 25/17 72/15 31/16
+f 52/13 32/14 36/3
+f 53/12 52/13 36/3
+f 55/11 53/12 36/3
+f 55/11 36/3 60/10
+f 15/94 16/93 17/85
+f 34/2 35/4 36/3
+f 17/85 22/86 23/1
+f 17/85 21/87 22/86
+f 17/85 20/88 21/87
+f 17/85 19/89 20/88
+f 17/85 18/90 19/89
+f 17/85 1/91 18/90
+f 2/92 1/91 17/85
+
+vt 0.992640 0.085152
+vt 0.038236 1.000000
+vt 0.015624 0.077472
+vt 0.995744 0.980822
+vt 0.979364 0.996045
+vt 0.967980 0.999535
+vt 0.973876 0.998193
+vt 0.961764 1.000000
+vt 0.988824 0.989617
+vt 0.992640 0.985480
+vt 0.984372 0.993164
+vt 1.000000 0.106167
+vt 0.998056 0.094911
+vt 0.995744 0.089810
+vt 0.999500 0.100387
+vt 0.999500 0.970245
+vt 1.000000 0.964465
+vt 0.998056 0.975721
+vt 0.001944 0.975721
+vt 0.015624 0.993164
+vt 0.026124 0.998193
+vt 0.032016 0.999535
+vt 0.020636 0.996045
+vt 0.007356 0.985479
+vt 0.011172 0.989617
+vt 0.004256 0.980821
+vt 0.001944 0.094911
+vt -0.000000 0.964465
+vt 0.000500 0.970245
+vt 0.000000 0.106167
+vt 0.000500 0.100387
+vt 0.007356 0.085152
+vt 0.004256 0.089810
+vt 0.011172 0.081019
+vt 0.147908 0.070632
+vt 0.026124 0.072439
+vt 0.020636 0.074587
+vt 0.032016 0.071097
+vt 0.038236 0.070632
+vt 0.973876 0.072439
+vt 0.823696 0.070632
+vt 0.176308 0.070342
+vt 0.147908 0.070342
+vt 0.820492 0.070372
+vt 0.179512 0.070104
+vt 0.817456 0.069621
+vt 0.182544 0.069413
+vt 0.814628 0.068424
+vt 0.185372 0.068305
+vt 0.812048 0.066833
+vt 0.187952 0.066818
+vt 0.809756 0.064889
+vt 0.190244 0.064993
+vt 0.807792 0.062643
+vt 0.192212 0.062862
+vt 0.806192 0.060138
+vt 0.193808 0.060465
+vt 0.805000 0.057420
+vt 0.195000 0.057836
+vt 0.804256 0.054539
+vt 0.195744 0.055015
+vt 0.794500 0.004160
+vt 0.196000 0.052041
+vt 0.208544 0.002405
+vt 0.198588 0.011662
+vt 0.202792 0.006316
+vt 0.205500 0.004160
+vt 0.200472 0.008829
+vt 0.196304 0.018093
+vt 0.196000 0.021606
+vt 0.197180 0.014762
+vt 0.780752 0.000000
+vt 0.215464 0.000283
+vt 0.211884 0.001097
+vt 0.219248 0.000000
+vt 0.788116 0.001097
+vt 0.784532 0.000283
+vt 0.791452 0.002405
+vt 0.804000 0.051543
+vt 0.802820 0.014762
+vt 0.799524 0.008829
+vt 0.797204 0.006316
+vt 0.801412 0.011662
+vt 0.804000 0.021606
+vt 0.803696 0.018093
+vt 0.967980 0.071097
+vt 0.961764 0.070632
+vt 0.984372 0.077472
+vt 0.979364 0.074587
+vt 0.988824 0.081019
+
+usemtl Mat_0
+f 3/99 44/101 47/100
+f 3/99 47/100 103/96
+f 118/98 3/99 103/96
+f 74/95 118/98 103/96
+f 74/95 103/96 136/97
+f 136/97 175/129 74/95
+f 175/129 56/134 74/95
+f 56/134 63/182 74/95
+f 63/182 71/184 74/95
+f 74/95 75/108 80/107
+f 74/95 80/107 86/106
+f 80/107 83/109 86/106
+f 33/135 51/181 54/180
+f 128/147 26/149 127/148
+f 128/147 127/148 130/146
+f 106/139 24/140 30/138
+f 107/136 106/139 30/138
+f 103/96 76/116 79/115
+f 103/96 79/115 85/114
+f 103/96 85/114 97/113
+f 85/114 90/118 97/113
+f 90/118 92/120 97/113
+f 97/113 99/123 58/122
+f 97/113 58/122 65/121
+f 97/113 65/121 136/97
+f 65/121 178/126 136/97
+f 178/126 179/128 136/97
+f 136/97 180/131 181/130
+f 181/130 182/132 175/129
+f 182/132 183/133 175/129
+f 175/129 176/137 107/136
+f 175/129 107/136 33/135
+f 64/125 65/121 66/124
+f 65/121 177/127 178/126
+f 58/122 66/124 65/121
+f 85/114 88/119 90/118
+f 79/115 82/117 85/114
+f 106/139 115/141 24/140
+f 115/141 5/142 24/140
+f 115/141 120/143 5/142
+f 120/143 6/144 5/142
+f 125/145 130/146 6/144
+f 39/174 38/179 101/178
+f 172/155 173/157 157/156
+f 172/155 157/156 112/154
+f 171/153 172/155 112/154
+f 157/156 104/173 112/154
+f 157/156 39/174 104/173
+f 157/156 46/175 39/174
+f 46/175 49/177 39/174
+f 173/157 158/158 157/156
+f 158/158 152/166 157/156
+f 152/166 155/170 157/156
+f 158/158 160/167 152/166
+f 160/167 153/169 152/166
+f 132/160 134/161 158/158
+f 11/159 132/160 158/158
+f 11/159 14/162 132/160
+f 173/157 174/164 184/163
+f 173/157 184/163 11/159
+f 184/163 12/165 11/159
+f 158/158 159/168 160/167
+f 173/157 11/159 158/158
+f 29/151 171/153 119/152
+f 26/149 29/151 123/150
+f 152/166 154/171 155/170
+f 155/170 156/172 157/156
+f 157/156 42/176 46/175
+f 39/174 101/178 104/173
+f 171/153 112/154 119/152
+f 29/151 119/152 123/150
+f 26/149 123/150 127/148
+f 125/145 128/147 130/146
+f 120/143 125/145 6/144
+f 107/136 30/138 33/135
+f 33/135 54/180 56/134
+f 56/134 61/183 63/182
+f 175/129 33/135 56/134
+f 136/97 181/130 175/129
+f 103/96 97/113 136/97
+f 74/95 86/106 118/98
+f 86/106 110/110 118/98
+f 118/98 124/103 3/99
+f 47/100 50/102 103/96
+f 86/106 111/111 110/110
+f 110/110 114/112 118/98
+f 118/98 122/104 124/103
+f 124/103 4/105 3/99
+
diff --git a/resources/quality/ankermake_m5/ankermake_m5_draft.inst.cfg b/resources/quality/ankermake_m5/ankermake_m5_draft.inst.cfg
new file mode 100644
index 0000000000..cb2ddba906
--- /dev/null
+++ b/resources/quality/ankermake_m5/ankermake_m5_draft.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = ankermake_m5
+name = Draft
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = draft
+setting_version = 20
+type = quality
+weight = -2
+
+[values]
+layer_height = 0.28
+layer_height_0 = 0.28
+
diff --git a/resources/quality/ankermake_m5/ankermake_m5_fine.inst.cfg b/resources/quality/ankermake_m5/ankermake_m5_fine.inst.cfg
new file mode 100644
index 0000000000..82dd39ec1b
--- /dev/null
+++ b/resources/quality/ankermake_m5/ankermake_m5_fine.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = ankermake_m5
+name = Fine
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = fine
+setting_version = 20
+type = quality
+weight = 1
+
+[values]
+layer_height = 0.12
+layer_height_0 = 0.2
+
diff --git a/resources/quality/ankermake_m5/ankermake_m5_normal.inst.cfg b/resources/quality/ankermake_m5/ankermake_m5_normal.inst.cfg
new file mode 100644
index 0000000000..f310a4ea70
--- /dev/null
+++ b/resources/quality/ankermake_m5/ankermake_m5_normal.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = ankermake_m5
+name = Normal
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = normal
+setting_version = 20
+type = quality
+weight = 0
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.24
+
diff --git a/resources/quality/fusion3/fusion3_0.4_ABS_fine.inst.cfg b/resources/quality/fusion3/fusion3_0.4_ABS_fine.inst.cfg
new file mode 100644
index 0000000000..8c4d149334
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.4_ABS_fine.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+definition = fusion3
+name = Fine Quality
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = fine
+setting_version = 20
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = True
+cool_fan_full_layer = 70
+cool_fan_speed = 65
+cool_fan_speed_min = 15
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 60
+infill_sparse_density = 75
+inset_direction = outside_in
+layer_height = 0.1
+layer_height_0 = 0.25
+line_width = 0.4
+material_bed_temperature = 110
+material_flow = 98
+material_print_temperature = 255.0
+retract_at_layer_change = False
+retraction_amount = 2.25
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 55
+speed_print = 35
+speed_travel_layer_0 = 100
+support_angle = 45
+support_enable = True
+support_infill_rate = 25
+top_bottom_thickness = 0.55
+wall_thickness = 0.9
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.4_ABS_good.inst.cfg b/resources/quality/fusion3/fusion3_0.4_ABS_good.inst.cfg
new file mode 100644
index 0000000000..ba55ef1e51
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.4_ABS_good.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = fusion3
+name = Good Quality
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = good
+setting_version = 20
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = True
+cool_fan_full_layer = 70
+cool_fan_speed = 65
+cool_fan_speed_min = 15
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 60
+infill_sparse_density = 15
+inset_direction = outside_in
+layer_height = 0.3
+layer_height_0 = 0.3
+line_width = 0.4
+material_bed_temperature = 110
+material_flow = 98
+material_print_temperature = 275
+retract_at_layer_change = False
+retraction_amount = 4.75
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+speed_print = 125
+speed_travel_layer_0 = 100
+support_angle = 45
+support_enable = True
+support_infill_rate = 25
+top_bottom_thickness = 0.9
+wall_thickness = 0.8
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.4_ABS_normal.inst.cfg b/resources/quality/fusion3/fusion3_0.4_ABS_normal.inst.cfg
new file mode 100644
index 0000000000..147eacff8a
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.4_ABS_normal.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = fusion3
+name = Normal Quality
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = normal
+setting_version = 20
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = True
+cool_fan_full_layer = 70
+cool_fan_speed = 65
+cool_fan_speed_min = 15
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 60
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height = 0.2
+layer_height_0 = 0.2
+line_width = 0.45
+material_bed_temperature = 110
+material_flow = 98
+material_print_temperature = 270
+retract_at_layer_change = False
+retraction_amount = 4
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+speed_print = 100
+speed_travel_layer_0 = 100
+support_angle = 45
+support_enable = True
+support_infill_rate = 25
+top_bottom_thickness = 0.6
+wall_thickness = 0.8
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.4_ASA_fine.inst.cfg b/resources/quality/fusion3/fusion3_0.4_ASA_fine.inst.cfg
new file mode 100644
index 0000000000..2c3cce6e79
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.4_ASA_fine.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = fusion3
+name = Fine Quality
+version = 4
+
+[metadata]
+material = generic_asa_175
+quality_type = fine
+setting_version = 20
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+cool_fan_enabled = True
+cool_fan_full_layer = 70
+cool_fan_speed = 15
+cool_fan_speed_min = 15
+cool_min_layer_time = 13
+infill_overlap = 15
+infill_sparse_density = 75
+inset_direction = outside_in
+layer_height_0 = 0.2
+line_width = 0.4
+material_bed_temperature = 100
+material_flow = 98
+material_flow_layer_0 = 98
+material_print_temperature = 265
+retract_at_layer_change = False
+retraction_amount = 2.25
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 50
+skirt_gap = 5
+skirt_line_count = 2
+speed_print = 35
+support_angle = 45
+support_enable = True
+support_infill_rate = 40
+top_bottom_thickness = 0.7
+wall_thickness = 0.8
+xy_offset_layer_0 = -0.15
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.4_ASA_good.inst.cfg b/resources/quality/fusion3/fusion3_0.4_ASA_good.inst.cfg
new file mode 100644
index 0000000000..8e09ca3aac
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.4_ASA_good.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = fusion3
+name = Good Quality
+version = 4
+
+[metadata]
+material = generic_asa_175
+quality_type = good
+setting_version = 20
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+cool_fan_enabled = True
+cool_fan_full_layer = 70
+cool_fan_speed = 15
+cool_fan_speed_min = 15
+cool_min_layer_time = 13
+infill_overlap = 20
+infill_sparse_density = 15
+inset_direction = outside_in
+layer_height_0 = 0.3
+line_width = 0.4
+material_bed_temperature = 100
+material_flow = 98
+material_flow_layer_0 = 98
+material_print_temperature = 295
+retract_at_layer_change = False
+retraction_amount = 4.75
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 115
+skirt_gap = 5
+skirt_line_count = 2
+speed_print = 85
+support_angle = 45
+support_enable = True
+support_infill_rate = 40
+top_bottom_thickness = 0.9
+wall_thickness = 0.8
+xy_offset_layer_0 = -0.15
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.4_ASA_normal.inst.cfg b/resources/quality/fusion3/fusion3_0.4_ASA_normal.inst.cfg
new file mode 100644
index 0000000000..5285f682d4
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.4_ASA_normal.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = fusion3
+name = Normal Quality
+version = 4
+
+[metadata]
+material = generic_asa_175
+quality_type = normal
+setting_version = 20
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+cool_fan_enabled = True
+cool_fan_full_layer = 70
+cool_fan_speed = 15
+cool_fan_speed_min = 15
+cool_min_layer_time = 13
+infill_overlap = 15
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.2
+line_width = 0.45
+material_bed_temperature = 100
+material_flow = 98
+material_flow_layer_0 = 98
+material_print_temperature = 295
+retract_at_layer_change = False
+retraction_amount = 4
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 115
+skirt_gap = 5
+skirt_line_count = 2
+speed_print = 100
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 0.6
+wall_thickness = 0.9
+xy_offset_layer_0 = -0.15
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.4_CPE_normal.inst.cfg b/resources/quality/fusion3/fusion3_0.4_CPE_normal.inst.cfg
new file mode 100644
index 0000000000..095b258020
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.4_CPE_normal.inst.cfg
@@ -0,0 +1,44 @@
+[general]
+definition = fusion3
+name = Normal Quality
+version = 4
+
+[metadata]
+material = generic_cpe_175
+quality_type = normal
+setting_version = 20
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = True
+cool_fan_full_layer = 60
+cool_fan_speed = 50
+cool_fan_speed_min = 15
+cool_min_layer_time = 11
+cool_min_layer_time_fan_speed_max = 100
+infill_overlap = 20
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.2
+line_width = 0.45
+material_bed_temperature = 110
+material_flow = 100
+material_flow_layer_0 = 100
+material_print_temperature = 215
+retract_at_layer_change = False
+retraction_amount = 4
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 115
+speed_print = 35
+speed_support = 35
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 0.6
+wall_thickness = 0.8
+xy_offset_layer_0 = -0.15
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.4_PA_normal.inst.cfg b/resources/quality/fusion3/fusion3_0.4_PA_normal.inst.cfg
new file mode 100644
index 0000000000..0a64f12316
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.4_PA_normal.inst.cfg
@@ -0,0 +1,44 @@
+[general]
+definition = fusion3
+name = Normal Quality
+version = 4
+
+[metadata]
+material = generic_nylon_175
+quality_type = normal
+setting_version = 20
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = True
+cool_fan_full_layer = 60
+cool_fan_speed = 50
+cool_fan_speed_min = 15
+cool_min_layer_time = 2.5
+cool_min_layer_time_fan_speed_max = 40
+infill_overlap = 15
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.2
+line_width = 0.45
+material_bed_temperature = 75
+material_flow = 100
+material_flow_layer_0 = 100
+material_print_temperature = 275
+retract_at_layer_change = False
+retraction_amount = 5
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 115
+speed_print = 65
+speed_support = 65
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 0.6
+wall_thickness = 0.8
+xy_offset_layer_0 = -0.15
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.4_PC_normal.inst.cfg b/resources/quality/fusion3/fusion3_0.4_PC_normal.inst.cfg
new file mode 100644
index 0000000000..c0acff030d
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.4_PC_normal.inst.cfg
@@ -0,0 +1,40 @@
+[general]
+definition = fusion3
+name = Normal Quality
+version = 4
+
+[metadata]
+material = generic_pc_175
+quality_type = normal
+setting_version = 20
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = false
+cool_min_layer_time = 3
+infill_overlap = 15
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.2
+line_width = 0.45
+material_bed_temperature = 130
+material_flow = 100
+material_flow_layer_0 = 100
+material_print_temperature = 295
+retract_at_layer_change = False
+retraction_amount = 5
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 115
+speed_layer_0 = 45
+speed_print = 85
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 0.6
+wall_thickness = 0.9
+xy_offset_layer_0 = -0.15
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.4_PETG_normal.inst.cfg b/resources/quality/fusion3/fusion3_0.4_PETG_normal.inst.cfg
new file mode 100644
index 0000000000..3078794a28
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.4_PETG_normal.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = fusion3
+name = Normal Quality
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = normal
+setting_version = 20
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+cool_fan_enabled = True
+cool_fan_full_layer = 60
+cool_fan_speed = 75
+cool_fan_speed_min = 15
+cool_min_layer_time = 4
+cool_min_layer_time_fan_speed_max = 70
+infill_overlap = 20
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.2
+line_width = 0.4
+material_bed_temperature = 65
+material_flow = 97
+material_flow_layer_0 = 97
+material_print_temperature = 260
+retract_at_layer_change = False
+retraction_amount = 4.6
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 110
+skirt_gap = 5
+speed_print = 85
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 0.6
+wall_thickness = 0.8
+xy_offset_layer_0 = -0.15
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.4_PLA_fine.inst.cfg b/resources/quality/fusion3/fusion3_0.4_PLA_fine.inst.cfg
new file mode 100644
index 0000000000..afc5e5546c
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.4_PLA_fine.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+definition = fusion3
+name = Fine Quality
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = fine
+setting_version = 20
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+adhesion_type = skirt
+cool_fan_enabled = True
+cool_fan_full_layer = 70
+cool_fan_speed = 100
+cool_fan_speed_min = 15
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 65
+infill_sparse_density = 60
+inset_direction = outside_in
+layer_height_0 = 0.2
+line_width = 0.4
+material_bed_temperature = 55
+material_flow = 99
+material_print_temperature = 220
+retract_at_layer_change = False
+retraction_amount = 2.5
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 55
+skirt_gap = 5
+speed_print = 40
+speed_travel_layer_0 = 100
+support_angle = 45
+support_enable = True
+support_infill_rate = 25
+top_bottom_thickness = 0.6
+wall_thickness = 0.9
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.4_PLA_good.inst.cfg b/resources/quality/fusion3/fusion3_0.4_PLA_good.inst.cfg
new file mode 100644
index 0000000000..91327e70f3
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.4_PLA_good.inst.cfg
@@ -0,0 +1,44 @@
+[general]
+definition = fusion3
+name = Good Quality
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = good
+setting_version = 20
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+adhesion_type = skirt
+cool_fan_enabled = True
+cool_fan_full_at_height = 0.8
+cool_fan_speed = 100
+cool_fan_speed_min = 15
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 65
+infill_overlap = 20
+infill_pattern = zigzag
+infill_sparse_density = 15
+inset_direction = outside_in
+layer_height_0 = 0.3
+line_width = 0.45
+material_bed_temperature = 55
+material_flow = 96
+material_flow_layer_0 = 96
+material_print_temperature = 240
+retract_at_layer_change = False
+retraction_amount = 4.25
+retraction_speed = 100
+skirt_gap = 5
+speed_print = 75
+speed_topbottom = 55
+speed_travel = 150
+speed_travel_layer_0 = 100
+speed_wall_0 = 50
+speed_wall_x = 65
+top_bottom_thickness = 0.9
+wall_thickness = 1.35
+xy_offset_layer_0 = -0.15
+
diff --git a/resources/quality/fusion3/fusion3_0.4_PLA_normal.inst.cfg b/resources/quality/fusion3/fusion3_0.4_PLA_normal.inst.cfg
new file mode 100644
index 0000000000..3d80124930
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.4_PLA_normal.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = fusion3
+name = Normal Quality
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = normal
+setting_version = 20
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+adhesion_type = skirt
+cool_fan_enabled = True
+cool_fan_full_at_height = 0.8
+cool_fan_speed = 100
+cool_fan_speed_min = 15
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 65
+infill_overlap = 20
+infill_pattern = zigzag
+infill_sparse_density = 25
+inset_direction = outside_in
+layer_height_0 = 0.25
+line_width = 0.45
+material_bed_temperature = 55
+material_flow = 96
+material_flow_layer_0 = 96
+material_print_temperature = 230
+retract_at_layer_change = False
+retraction_amount = 4.25
+retraction_speed = 100
+skirt_gap = 5
+speed_topbottom = 55
+speed_travel = 150
+speed_travel_layer_0 = 100
+speed_wall_0 = 65
+speed_wall_x = 85
+top_bottom_thickness = 0.6
+wall_thickness = 1.35
+xy_offset_layer_0 = -0.15
+
diff --git a/resources/quality/fusion3/fusion3_0.4_TPU_normal.inst.cfg b/resources/quality/fusion3/fusion3_0.4_TPU_normal.inst.cfg
new file mode 100644
index 0000000000..26785389b3
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.4_TPU_normal.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+definition = fusion3
+name = Normal Quality
+version = 4
+
+[metadata]
+material = generic_tpu
+quality_type = normal
+setting_version = 20
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+cool_fan_enabled = True
+cool_fan_full_layer = 60
+cool_fan_speed = 50
+cool_fan_speed_min = 15
+cool_min_layer_time = 15
+infill_overlap = 20
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.2
+line_width = 0.4
+material_bed_temperature = 45
+material_flow = 125
+material_flow_layer_0 = 125
+material_print_temperature = 255
+retract_at_layer_change = False
+retraction_amount = 10
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 50
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = 20
+speed_layer_0 = 20
+speed_print = 25
+speed_support = 12
+speed_topbottom = 25
+speed_wall = 20
+speed_wall_0 = 20
+speed_wall_x = 20
+support_angle = 50
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 0.6
+wall_thickness = 0.8
+xy_offset_layer_0 = -0.15
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.6_ABS_good.inst.cfg b/resources/quality/fusion3/fusion3_0.6_ABS_good.inst.cfg
new file mode 100644
index 0000000000..52196d8b58
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.6_ABS_good.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = fusion3
+name = Good Quality
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = good
+setting_version = 20
+type = quality
+variant = 0.6mm Nozzle
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = True
+cool_fan_full_layer = 70
+cool_fan_speed = 65
+cool_fan_speed_min = 15
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 60
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height = 0.3
+layer_height_0 = 0.3
+line_width = 0.4
+material_bed_temperature = 110
+material_flow = 98
+material_print_temperature = 275.0
+retract_at_layer_change = False
+retraction_amount = 2.25
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 55
+speed_print = 35
+speed_travel_layer_0 = 100
+support_angle = 45
+support_enable = True
+support_infill_rate = 25
+top_bottom_thickness = 0.9
+wall_thickness = 1.2
+xy_offset_layer_0 = -0.2
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.6_ABS_low.inst.cfg b/resources/quality/fusion3/fusion3_0.6_ABS_low.inst.cfg
new file mode 100644
index 0000000000..a92cbb6533
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.6_ABS_low.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+definition = fusion3
+name = Low Quality
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = low
+setting_version = 20
+type = quality
+variant = 0.6mm Nozzle
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = True
+cool_fan_full_layer = 70
+cool_fan_speed = 65
+cool_fan_speed_min = 15
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 60
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.35
+line_width = 0.65
+material_bed_temperature = 110
+material_flow = 98
+material_print_temperature = 275.0
+retract_at_layer_change = False
+retraction_amount = 2.25
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 55
+speed_print = 35
+speed_travel_layer_0 = 100
+support_angle = 45
+support_enable = True
+support_infill_rate = 25
+top_bottom_thickness = 0.9
+wall_thickness = 1.2
+xy_offset_layer_0 = -0.2
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.6_ASA_good.inst.cfg b/resources/quality/fusion3/fusion3_0.6_ASA_good.inst.cfg
new file mode 100644
index 0000000000..f46ea15ccf
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.6_ASA_good.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = fusion3
+name = Good Quality
+version = 4
+
+[metadata]
+material = generic_asa_175
+quality_type = good
+setting_version = 20
+type = quality
+variant = 0.6mm Nozzle
+
+[values]
+cool_fan_enabled = True
+cool_fan_full_layer = 70
+cool_fan_speed = 25
+cool_fan_speed_min = 15
+cool_min_layer_time = 13
+infill_overlap = 15
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.3
+line_width = 0.6
+material_bed_temperature = 100
+material_flow = 98
+material_flow_layer_0 = 98
+material_print_temperature = 290
+retract_at_layer_change = False
+retraction_amount = 4
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 115
+skirt_gap = 5
+skirt_line_count = 1
+speed_print = 85
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 0.9
+wall_thickness = 1.2
+xy_offset_layer_0 = -0.2
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.6_ASA_low.inst.cfg b/resources/quality/fusion3/fusion3_0.6_ASA_low.inst.cfg
new file mode 100644
index 0000000000..1e07555e66
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.6_ASA_low.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = fusion3
+name = Low Quality
+version = 4
+
+[metadata]
+material = generic_asa_175
+quality_type = low
+setting_version = 20
+type = quality
+variant = 0.6mm Nozzle
+
+[values]
+cool_fan_enabled = True
+cool_fan_full_layer = 70
+cool_fan_speed = 25
+cool_fan_speed_min = 15
+cool_min_layer_time = 13
+infill_overlap = 15
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.35
+line_width = 0.65
+material_bed_temperature = 100
+material_flow = 98
+material_flow_layer_0 = 98
+material_print_temperature = 290
+retract_at_layer_change = False
+retraction_amount = 4
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 115
+skirt_gap = 5
+skirt_line_count = 1
+speed_print = 75
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 1
+wall_thickness = 1.3
+xy_offset_layer_0 = -0.2
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.6_CPE_good.inst.cfg b/resources/quality/fusion3/fusion3_0.6_CPE_good.inst.cfg
new file mode 100644
index 0000000000..555f153bdc
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.6_CPE_good.inst.cfg
@@ -0,0 +1,44 @@
+[general]
+definition = fusion3
+name = Good Quality
+version = 4
+
+[metadata]
+material = generic_cpe_175
+quality_type = good
+setting_version = 20
+type = quality
+variant = 0.6mm Nozzle
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = True
+cool_fan_full_layer = 60
+cool_fan_speed = 50
+cool_fan_speed_min = 15
+cool_min_layer_time = 11
+cool_min_layer_time_fan_speed_max = 100
+infill_overlap = 20
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.3
+line_width = 0.6
+material_bed_temperature = 110
+material_flow = 100
+material_flow_layer_0 = 100
+material_print_temperature = 280
+retract_at_layer_change = False
+retraction_amount = 4
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 115
+speed_print = 35
+speed_support = 35
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 0.9
+wall_thickness = 1.2
+xy_offset_layer_0 = -0.2
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.6_PA_good.inst.cfg b/resources/quality/fusion3/fusion3_0.6_PA_good.inst.cfg
new file mode 100644
index 0000000000..9c738cdbda
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.6_PA_good.inst.cfg
@@ -0,0 +1,44 @@
+[general]
+definition = fusion3
+name = Good Quality
+version = 4
+
+[metadata]
+material = generic_nylon_175
+quality_type = good
+setting_version = 20
+type = quality
+variant = 0.6mm Nozzle
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = True
+cool_fan_full_layer = 60
+cool_fan_speed = 50
+cool_fan_speed_min = 15
+cool_min_layer_time = 2.5
+cool_min_layer_time_fan_speed_max = 40
+infill_overlap = 15
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.3
+line_width = 0.6
+material_bed_temperature = 75
+material_flow = 100
+material_flow_layer_0 = 100
+material_print_temperature = 275
+retract_at_layer_change = False
+retraction_amount = 5
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 115
+speed_print = 65
+speed_support = 65
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 0.9
+wall_thickness = 1.2
+xy_offset_layer_0 = -0.2
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.6_PC_good.inst.cfg b/resources/quality/fusion3/fusion3_0.6_PC_good.inst.cfg
new file mode 100644
index 0000000000..50c6af40d1
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.6_PC_good.inst.cfg
@@ -0,0 +1,40 @@
+[general]
+definition = fusion3
+name = Good Quality
+version = 4
+
+[metadata]
+material = generic_pc_175
+quality_type = good
+setting_version = 20
+type = quality
+variant = 0.6mm Nozzle
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = False
+cool_min_layer_time = 5
+infill_overlap = 15
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.3
+line_width = 0.6
+material_bed_temperature = 130
+material_flow = 100
+material_flow_layer_0 = 100
+material_print_temperature = 295
+retract_at_layer_change = False
+retraction_amount = 5
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 115
+speed_layer_0 = 25
+speed_print = 50
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 0.9
+wall_thickness = 1.2
+xy_offset_layer_0 = -0.2
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.6_PETG_good.inst.cfg b/resources/quality/fusion3/fusion3_0.6_PETG_good.inst.cfg
new file mode 100644
index 0000000000..79b0a9b436
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.6_PETG_good.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = fusion3
+name = Good Quality
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = good
+setting_version = 20
+type = quality
+variant = 0.6mm Nozzle
+
+[values]
+cool_fan_enabled = True
+cool_fan_full_layer = 60
+cool_fan_speed = 100
+cool_fan_speed_min = 15
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 20
+infill_overlap = 20
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.3
+line_width = 0.6
+material_bed_temperature = 65
+material_flow = 97
+material_flow_layer_0 = 97
+material_print_temperature = 265
+retract_at_layer_change = False
+retraction_amount = 5
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 115
+skirt_gap = 5
+speed_print = 65
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 0.9
+wall_thickness = 1.2
+xy_offset_layer_0 = -0.15
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.6_PLA_good.inst.cfg b/resources/quality/fusion3/fusion3_0.6_PLA_good.inst.cfg
new file mode 100644
index 0000000000..34c80e9925
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.6_PLA_good.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = fusion3
+name = Good Quality
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = good
+setting_version = 20
+type = quality
+variant = 0.6mm Nozzle
+
+[values]
+adhesion_type = skirt
+cool_fan_enabled = True
+cool_fan_full_at_height = 0.8
+cool_fan_speed = 100
+cool_fan_speed_min = 15
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 65
+infill_overlap = 20
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.3
+line_width = 0.6
+material_bed_temperature = 55
+material_flow = 96
+material_flow_layer_0 = 96
+material_print_temperature = 240
+retract_at_layer_change = False
+retraction_amount = 4.2
+retraction_speed = 100
+skirt_gap = 5
+speed_infill = 75
+speed_print = 100
+speed_roofing = 50
+speed_topbottom = 55
+speed_travel = 150
+speed_travel_layer_0 = 100
+top_bottom_thickness = 0.9
+wall_line_count = 2
+xy_offset_layer_0 = -0.2
+
diff --git a/resources/quality/fusion3/fusion3_0.6_PLA_low.inst.cfg b/resources/quality/fusion3/fusion3_0.6_PLA_low.inst.cfg
new file mode 100644
index 0000000000..23eee9899c
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.6_PLA_low.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = fusion3
+name = Low Quality
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = low
+setting_version = 20
+type = quality
+variant = 0.6mm Nozzle
+
+[values]
+adhesion_type = skirt
+cool_fan_enabled = True
+cool_fan_full_at_height = 0.8
+cool_fan_speed = 100
+cool_fan_speed_min = 15
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 65
+infill_overlap = 20
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.35
+line_width = 0.65
+material_bed_temperature = 55
+material_flow = 96
+material_flow_layer_0 = 96
+material_print_temperature = 240
+retract_at_layer_change = False
+retraction_amount = 4.2
+retraction_speed = 100
+skirt_gap = 5
+speed_infill = 75
+speed_print = 125
+speed_travel = 150
+speed_travel_layer_0 = 100
+top_bottom_thickness = 1.0
+wall_thickness = 1.3
+xy_offset_layer_0 = -0.2
+
diff --git a/resources/quality/fusion3/fusion3_0.6_TPU_good.inst.cfg b/resources/quality/fusion3/fusion3_0.6_TPU_good.inst.cfg
new file mode 100644
index 0000000000..cf35591756
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.6_TPU_good.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+definition = fusion3
+name = Good Quality
+version = 4
+
+[metadata]
+material = generic_tpu
+quality_type = good
+setting_version = 20
+type = quality
+variant = 0.6mm Nozzle
+
+[values]
+cool_fan_enabled = True
+cool_fan_full_layer = 60
+cool_fan_speed = 50
+cool_fan_speed_min = 15
+cool_min_layer_time = 15
+infill_overlap = 20
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.3
+line_width = 0.6
+material_bed_temperature = 45
+material_flow = 125
+material_flow_layer_0 = 125
+material_print_temperature = 255
+retract_at_layer_change = False
+retraction_amount = 10
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 50
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = 25
+speed_layer_0 = 20
+speed_print = 25
+speed_support = 20
+speed_topbottom = 25
+speed_wall = 25
+speed_wall_0 = 20
+speed_wall_x = 25
+support_angle = 50
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 0.9
+wall_thickness = 1.2
+xy_offset_layer_0 = -0.15
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.8_ABS_rapid.inst.cfg b/resources/quality/fusion3/fusion3_0.8_ABS_rapid.inst.cfg
new file mode 100644
index 0000000000..30f69fd7b9
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.8_ABS_rapid.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+definition = fusion3
+name = Rapid Quality
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = rapid
+setting_version = 20
+type = quality
+variant = 0.8mm Nozzle
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = True
+cool_fan_full_layer = 70
+cool_fan_speed = 65
+cool_fan_speed_min = 15
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 60
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.4
+line_width = 0.8
+material_bed_temperature = 110
+material_flow = 98
+material_print_temperature = 275.0
+retract_at_layer_change = False
+retraction_amount = 4.25
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 55
+speed_print = 83.3
+speed_travel_layer_0 = 100
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 1.2
+wall_thickness = 1.6
+xy_offset_layer_0 = -0.2
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.8_ABS_rough.inst.cfg b/resources/quality/fusion3/fusion3_0.8_ABS_rough.inst.cfg
new file mode 100644
index 0000000000..4aabc09ea8
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.8_ABS_rough.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+definition = fusion3
+name = Rough Quality
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = rough
+setting_version = 20
+type = quality
+variant = 0.8mm Nozzle
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = True
+cool_fan_full_layer = 70
+cool_fan_speed = 65
+cool_fan_speed_min = 15
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 60
+infill_sparse_density = 15
+inset_direction = outside_in
+layer_height_0 = 0.5
+line_width = 0.8
+material_bed_temperature = 110
+material_flow = 98
+material_print_temperature = 275.0
+retract_at_layer_change = False
+retraction_amount = 4.25
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 55
+speed_print = 100
+speed_travel_layer_0 = 100
+support_angle = 45
+support_enable = True
+support_infill_rate = 25
+top_bottom_thickness = 1.5
+wall_thickness = 1.6
+xy_offset_layer_0 = -0.2
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.8_ASA_rapid.inst.cfg b/resources/quality/fusion3/fusion3_0.8_ASA_rapid.inst.cfg
new file mode 100644
index 0000000000..8636765f00
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.8_ASA_rapid.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = fusion3
+name = Rapid Quality
+version = 4
+
+[metadata]
+material = generic_asa_175
+quality_type = rapid
+setting_version = 20
+type = quality
+variant = 0.8mm Nozzle
+
+[values]
+cool_fan_enabled = True
+cool_fan_full_layer = 70
+cool_fan_speed = 15
+cool_fan_speed_min = 15
+cool_min_layer_time = 13
+infill_overlap = 15
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.4
+line_width = 0.8
+material_bed_temperature = 100
+material_flow = 98
+material_flow_layer_0 = 98
+material_print_temperature = 290
+retract_at_layer_change = False
+retraction_amount = 4
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 115
+skirt_gap = 5
+skirt_line_count = 1
+speed_print = 65
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 1.2
+wall_thickness = 1.6
+xy_offset_layer_0 = -0.25
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.8_ASA_rough.inst.cfg b/resources/quality/fusion3/fusion3_0.8_ASA_rough.inst.cfg
new file mode 100644
index 0000000000..2ab2496a13
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.8_ASA_rough.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = fusion3
+name = Rough Quality
+version = 4
+
+[metadata]
+material = generic_asa_175
+quality_type = rough
+setting_version = 20
+type = quality
+variant = 0.8mm Nozzle
+
+[values]
+cool_fan_enabled = True
+cool_fan_full_layer = 70
+cool_fan_speed = 15
+cool_fan_speed_min = 15
+cool_min_layer_time = 13
+infill_overlap = 15
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.48
+line_width = 0.85
+material_bed_temperature = 100
+material_flow = 98
+material_flow_layer_0 = 98
+material_print_temperature = 290
+retract_at_layer_change = False
+retraction_amount = 4
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 115
+skirt_gap = 5
+skirt_line_count = 1
+speed_print = 55
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 1.5
+wall_thickness = 1.7
+xy_offset_layer_0 = -0.25
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.8_CPE_rapid.inst.cfg b/resources/quality/fusion3/fusion3_0.8_CPE_rapid.inst.cfg
new file mode 100644
index 0000000000..a26d358db6
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.8_CPE_rapid.inst.cfg
@@ -0,0 +1,44 @@
+[general]
+definition = fusion3
+name = Rapid Quality
+version = 4
+
+[metadata]
+material = generic_cpe_175
+quality_type = rapid
+setting_version = 20
+type = quality
+variant = 0.8mm Nozzle
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = True
+cool_fan_full_layer = 60
+cool_fan_speed = 50
+cool_fan_speed_min = 15
+cool_min_layer_time = 15
+cool_min_layer_time_fan_speed_max = 100
+infill_overlap = 20
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.4
+line_width = 0.8
+material_bed_temperature = 110
+material_flow = 100
+material_flow_layer_0 = 100
+material_print_temperature = 285
+retract_at_layer_change = False
+retraction_amount = 4
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 115
+speed_print = 35
+speed_support = 35
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 1.2
+wall_thickness = 1.6
+xy_offset_layer_0 = -0.25
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.8_PA_rapid.inst.cfg b/resources/quality/fusion3/fusion3_0.8_PA_rapid.inst.cfg
new file mode 100644
index 0000000000..f1f2dbc9db
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.8_PA_rapid.inst.cfg
@@ -0,0 +1,44 @@
+[general]
+definition = fusion3
+name = Rapid Quality
+version = 4
+
+[metadata]
+material = generic_nylon_175
+quality_type = rapid
+setting_version = 20
+type = quality
+variant = 0.8mm Nozzle
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = True
+cool_fan_full_layer = 60
+cool_fan_speed = 50
+cool_fan_speed_min = 15
+cool_min_layer_time = 2.5
+cool_min_layer_time_fan_speed_max = 40
+infill_overlap = 15
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.4
+line_width = 0.8
+material_bed_temperature = 75
+material_flow = 100
+material_flow_layer_0 = 100
+material_print_temperature = 275
+retract_at_layer_change = False
+retraction_amount = 5
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 115
+speed_print = 65
+speed_support = 65
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 1.2
+wall_thickness = 1.6
+xy_offset_layer_0 = -0.25
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.8_PC_rapid.inst.cfg b/resources/quality/fusion3/fusion3_0.8_PC_rapid.inst.cfg
new file mode 100644
index 0000000000..95d3579290
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.8_PC_rapid.inst.cfg
@@ -0,0 +1,40 @@
+[general]
+definition = fusion3
+name = Rapid Quality
+version = 4
+
+[metadata]
+material = generic_pc_175
+quality_type = rapid
+setting_version = 20
+type = quality
+variant = 0.8mm Nozzle
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = False
+cool_min_layer_time = 5
+infill_overlap = 15
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.4
+line_width = 0.8
+material_bed_temperature = 130
+material_flow = 100
+material_flow_layer_0 = 100
+material_print_temperature = 295
+retract_at_layer_change = False
+retraction_amount = 5
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 115
+speed_layer_0 = 25
+speed_print = 50
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 1.2
+wall_thickness = 1.6
+xy_offset_layer_0 = -0.25
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.8_PETG_rapid.inst.cfg b/resources/quality/fusion3/fusion3_0.8_PETG_rapid.inst.cfg
new file mode 100644
index 0000000000..f2ef5811b5
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.8_PETG_rapid.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = fusion3
+name = Rapid Quality
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = rapid
+setting_version = 20
+type = quality
+variant = 0.8mm Nozzle
+
+[values]
+cool_fan_enabled = True
+cool_fan_full_layer = 60
+cool_fan_speed = 75
+cool_fan_speed_min = 15
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 20
+infill_overlap = 20
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.4
+line_width = 0.8
+material_bed_temperature = 65
+material_flow = 97
+material_flow_layer_0 = 97
+material_print_temperature = 275
+retract_at_layer_change = False
+retraction_amount = 5
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 115
+skirt_gap = 5
+speed_print = 65
+support_angle = 45
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 1.2
+wall_thickness = 1.6
+xy_offset_layer_0 = -0.15
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_0.8_PLA_rapid.inst.cfg b/resources/quality/fusion3/fusion3_0.8_PLA_rapid.inst.cfg
new file mode 100644
index 0000000000..654bd647c9
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.8_PLA_rapid.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = fusion3
+name = Rapid Quality
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = rapid
+setting_version = 20
+type = quality
+variant = 0.8mm Nozzle
+
+[values]
+adhesion_type = skirt
+cool_fan_enabled = True
+cool_fan_full_at_height = 0.8
+cool_fan_speed = 100
+cool_fan_speed_min = 15
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 65
+infill_overlap = 20
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.4
+line_width = 0.8
+material_bed_temperature = 55
+material_flow = 96
+material_flow_layer_0 = 96
+material_print_temperature = 240
+material_print_temperature_layer_0 = 240
+retract_at_layer_change = False
+retraction_amount = 4
+retraction_speed = 100
+skirt_gap = 5
+speed_infill = 45
+speed_print = 65
+speed_travel = 150
+speed_travel_layer_0 = 100
+speed_wall_x = 45
+top_bottom_thickness = 1.2
+wall_line_count = 2
+xy_offset_layer_0 = -0.25
+
diff --git a/resources/quality/fusion3/fusion3_0.8_PLA_rough.inst.cfg b/resources/quality/fusion3/fusion3_0.8_PLA_rough.inst.cfg
new file mode 100644
index 0000000000..26776ac138
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.8_PLA_rough.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = fusion3
+name = Rough Quality
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = rough
+setting_version = 20
+type = quality
+variant = 0.8mm Nozzle
+
+[values]
+adhesion_type = skirt
+cool_fan_full_at_height = 1.0
+cool_fan_speed = 100
+cool_min_layer_time = 16
+cool_min_speed = 30
+infill_overlap = 20
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.44
+line_width = 0.85
+material_bed_temperature = 55
+material_flow = 96
+material_flow_layer_0 = 96
+material_print_temperature = 240
+material_print_temperature_layer_0 = 240
+retract_at_layer_change = False
+retraction_amount = 4
+retraction_speed = 100
+skirt_gap = 5
+speed_infill = 40
+speed_print = 60
+speed_travel = 150
+speed_travel_layer_0 = 100
+speed_wall_x = 40
+top_bottom_thickness = 1.4
+wall_line_count = 2
+xy_offset_layer_0 = -0.25
+
diff --git a/resources/quality/fusion3/fusion3_0.8_TPU_rapid.inst.cfg b/resources/quality/fusion3/fusion3_0.8_TPU_rapid.inst.cfg
new file mode 100644
index 0000000000..8640e104c3
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_0.8_TPU_rapid.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+definition = fusion3
+name = Rapid Quality
+version = 4
+
+[metadata]
+material = generic_tpu
+quality_type = rapid
+setting_version = 20
+type = quality
+variant = 0.8mm Nozzle
+
+[values]
+cool_fan_enabled = True
+cool_fan_full_layer = 60
+cool_fan_speed = 50
+cool_fan_speed_min = 15
+cool_min_layer_time = 20
+infill_overlap = 20
+infill_sparse_density = 30
+inset_direction = outside_in
+layer_height_0 = 0.4
+line_width = 0.8
+material_bed_temperature = 45
+material_flow = 125
+material_flow_layer_0 = 125
+material_print_temperature = 255
+retract_at_layer_change = False
+retraction_amount = 10
+retraction_combing = noskin
+retraction_combing_max_distance = 10
+retraction_speed = 50
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = 25
+speed_layer_0 = 20
+speed_print = 25
+speed_support = 20
+speed_topbottom = 25
+speed_wall = 25
+speed_wall_0 = 20
+speed_wall_x = 25
+support_angle = 50
+support_enable = True
+support_infill_rate = 30
+top_bottom_thickness = 1.2
+wall_thickness = 1.6
+xy_offset_layer_0 = -0.15
+zig_zaggify_infill = True
+
diff --git a/resources/quality/fusion3/fusion3_global_fine.inst.cfg b/resources/quality/fusion3/fusion3_global_fine.inst.cfg
new file mode 100644
index 0000000000..0d00e42595
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_global_fine.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+definition = fusion3
+name = Fine Quality
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = fine
+setting_version = 20
+type = quality
+
+[values]
+layer_height = 0.1
+
diff --git a/resources/quality/fusion3/fusion3_global_good.inst.cfg b/resources/quality/fusion3/fusion3_global_good.inst.cfg
new file mode 100644
index 0000000000..470068971a
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_global_good.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+definition = fusion3
+name = Good Quality
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = good
+setting_version = 20
+type = quality
+
+[values]
+layer_height = 0.3
+
diff --git a/resources/quality/fusion3/fusion3_global_low.inst.cfg b/resources/quality/fusion3/fusion3_global_low.inst.cfg
new file mode 100644
index 0000000000..4fe7dc1e40
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_global_low.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+definition = fusion3
+name = Low Quality
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = low
+setting_version = 20
+type = quality
+
+[values]
+layer_height = 0.35
+
diff --git a/resources/quality/fusion3/fusion3_global_normal.inst.cfg b/resources/quality/fusion3/fusion3_global_normal.inst.cfg
new file mode 100644
index 0000000000..b1511dacf0
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_global_normal.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+definition = fusion3
+name = Normal Quality
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = normal
+setting_version = 20
+type = quality
+
+[values]
+layer_height = 0.2
+
diff --git a/resources/quality/fusion3/fusion3_global_rapid.inst.cfg b/resources/quality/fusion3/fusion3_global_rapid.inst.cfg
new file mode 100644
index 0000000000..7acfe1ef4a
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_global_rapid.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+definition = fusion3
+name = Rapid Quality
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = rapid
+setting_version = 20
+type = quality
+
+[values]
+layer_height = 0.4
+
diff --git a/resources/quality/fusion3/fusion3_global_rough.inst.cfg b/resources/quality/fusion3/fusion3_global_rough.inst.cfg
new file mode 100644
index 0000000000..77fbbd332f
--- /dev/null
+++ b/resources/quality/fusion3/fusion3_global_rough.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+definition = fusion3
+name = Rough Quality
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = rough
+setting_version = 20
+type = quality
+
+[values]
+layer_height = 0.5
+
diff --git a/resources/variants/dxu_0.25.inst.cfg b/resources/variants/dxu/dxu_0.25.inst.cfg
similarity index 79%
rename from resources/variants/dxu_0.25.inst.cfg
rename to resources/variants/dxu/dxu_0.25.inst.cfg
index bc2f225b27..eedf5108e8 100644
--- a/resources/variants/dxu_0.25.inst.cfg
+++ b/resources/variants/dxu/dxu_0.25.inst.cfg
@@ -1,13 +1,14 @@
 [general]
+definition = dxu
 name = 0.25 mm
 version = 4
-definition = dxu
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
 machine_nozzle_size = 0.25
-machine_nozzle_tip_outer_diameter = 0.8
\ No newline at end of file
+machine_nozzle_tip_outer_diameter = 0.8
+
diff --git a/resources/variants/dxu_0.4.inst.cfg b/resources/variants/dxu/dxu_0.4.inst.cfg
similarity index 79%
rename from resources/variants/dxu_0.4.inst.cfg
rename to resources/variants/dxu/dxu_0.4.inst.cfg
index 46cd2f377e..1795f42dfb 100644
--- a/resources/variants/dxu_0.4.inst.cfg
+++ b/resources/variants/dxu/dxu_0.4.inst.cfg
@@ -1,13 +1,14 @@
 [general]
+definition = dxu
 name = 0.4 mm
 version = 4
-definition = dxu
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
 machine_nozzle_size = 0.4
-machine_nozzle_tip_outer_diameter = 1.05
\ No newline at end of file
+machine_nozzle_tip_outer_diameter = 1.05
+
diff --git a/resources/variants/dxu_0.6.inst.cfg b/resources/variants/dxu/dxu_0.6.inst.cfg
similarity index 79%
rename from resources/variants/dxu_0.6.inst.cfg
rename to resources/variants/dxu/dxu_0.6.inst.cfg
index d23bc8f1b6..ae53a2fcd7 100644
--- a/resources/variants/dxu_0.6.inst.cfg
+++ b/resources/variants/dxu/dxu_0.6.inst.cfg
@@ -1,13 +1,14 @@
 [general]
+definition = dxu
 name = 0.6 mm
 version = 4
-definition = dxu
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
 machine_nozzle_size = 0.6
-machine_nozzle_tip_outer_diameter = 1.25
\ No newline at end of file
+machine_nozzle_tip_outer_diameter = 1.25
+
diff --git a/resources/variants/dxu_0.8.inst.cfg b/resources/variants/dxu/dxu_0.8.inst.cfg
similarity index 79%
rename from resources/variants/dxu_0.8.inst.cfg
rename to resources/variants/dxu/dxu_0.8.inst.cfg
index 3585bd9c63..e69188081b 100644
--- a/resources/variants/dxu_0.8.inst.cfg
+++ b/resources/variants/dxu/dxu_0.8.inst.cfg
@@ -1,13 +1,14 @@
 [general]
+definition = dxu
 name = 0.8 mm
 version = 4
-definition = dxu
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
 machine_nozzle_size = 0.8
-machine_nozzle_tip_outer_diameter = 1.35
\ No newline at end of file
+machine_nozzle_tip_outer_diameter = 1.35
+
diff --git a/resources/variants/dxu_dual_0.25.inst.cfg b/resources/variants/dxu/dxu_dual_0.25.inst.cfg
similarity index 80%
rename from resources/variants/dxu_dual_0.25.inst.cfg
rename to resources/variants/dxu/dxu_dual_0.25.inst.cfg
index 8e354c10f9..22aa527d46 100644
--- a/resources/variants/dxu_dual_0.25.inst.cfg
+++ b/resources/variants/dxu/dxu_dual_0.25.inst.cfg
@@ -1,13 +1,14 @@
 [general]
+definition = dxu_dual
 name = 0.25 mm
 version = 4
-definition = dxu_dual
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
 machine_nozzle_size = 0.25
-machine_nozzle_tip_outer_diameter = 0.8
\ No newline at end of file
+machine_nozzle_tip_outer_diameter = 0.8
+
diff --git a/resources/variants/dxu_dual_0.4.inst.cfg b/resources/variants/dxu/dxu_dual_0.4.inst.cfg
similarity index 79%
rename from resources/variants/dxu_dual_0.4.inst.cfg
rename to resources/variants/dxu/dxu_dual_0.4.inst.cfg
index 7daea17a91..6d54c18be6 100644
--- a/resources/variants/dxu_dual_0.4.inst.cfg
+++ b/resources/variants/dxu/dxu_dual_0.4.inst.cfg
@@ -1,13 +1,14 @@
 [general]
+definition = dxu_dual
 name = 0.4 mm
 version = 4
-definition = dxu_dual
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
 machine_nozzle_size = 0.4
-machine_nozzle_tip_outer_diameter = 1.05
\ No newline at end of file
+machine_nozzle_tip_outer_diameter = 1.05
+
diff --git a/resources/variants/dxu_dual_0.6.inst.cfg b/resources/variants/dxu/dxu_dual_0.6.inst.cfg
similarity index 79%
rename from resources/variants/dxu_dual_0.6.inst.cfg
rename to resources/variants/dxu/dxu_dual_0.6.inst.cfg
index 8272da71d6..d52aa9a3a3 100644
--- a/resources/variants/dxu_dual_0.6.inst.cfg
+++ b/resources/variants/dxu/dxu_dual_0.6.inst.cfg
@@ -1,13 +1,14 @@
 [general]
+definition = dxu_dual
 name = 0.6 mm
 version = 4
-definition = dxu_dual
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
 machine_nozzle_size = 0.6
-machine_nozzle_tip_outer_diameter = 1.25
\ No newline at end of file
+machine_nozzle_tip_outer_diameter = 1.25
+
diff --git a/resources/variants/dxu_dual_0.8.inst.cfg b/resources/variants/dxu/dxu_dual_0.8.inst.cfg
similarity index 79%
rename from resources/variants/dxu_dual_0.8.inst.cfg
rename to resources/variants/dxu/dxu_dual_0.8.inst.cfg
index 63b41f92b1..40f2070c60 100644
--- a/resources/variants/dxu_dual_0.8.inst.cfg
+++ b/resources/variants/dxu/dxu_dual_0.8.inst.cfg
@@ -1,13 +1,14 @@
 [general]
+definition = dxu_dual
 name = 0.8 mm
 version = 4
-definition = dxu_dual
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
 machine_nozzle_size = 0.8
-machine_nozzle_tip_outer_diameter = 1.35
\ No newline at end of file
+machine_nozzle_tip_outer_diameter = 1.35
+
diff --git a/resources/variants/dxu/dxu_umo_0.25.inst.cfg b/resources/variants/dxu/dxu_umo_0.25.inst.cfg
new file mode 100644
index 0000000000..143c63d509
--- /dev/null
+++ b/resources/variants/dxu/dxu_umo_0.25.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+definition = dxu_umo
+name = 0.25 mm
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 20
+type = variant
+
+[values]
+machine_nozzle_size = 0.25
+machine_nozzle_tip_outer_diameter = 0.8
+
diff --git a/resources/variants/dxu/dxu_umo_0.4.inst.cfg b/resources/variants/dxu/dxu_umo_0.4.inst.cfg
new file mode 100644
index 0000000000..7f6d5ea62d
--- /dev/null
+++ b/resources/variants/dxu/dxu_umo_0.4.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+definition = dxu_umo
+name = 0.4 mm
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 20
+type = variant
+
+[values]
+machine_nozzle_size = 0.4
+machine_nozzle_tip_outer_diameter = 1.05
+
diff --git a/resources/variants/dxu/dxu_umo_0.6.inst.cfg b/resources/variants/dxu/dxu_umo_0.6.inst.cfg
new file mode 100644
index 0000000000..7b1b9c04f6
--- /dev/null
+++ b/resources/variants/dxu/dxu_umo_0.6.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+definition = dxu_umo
+name = 0.6 mm
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 20
+type = variant
+
+[values]
+machine_nozzle_size = 0.6
+machine_nozzle_tip_outer_diameter = 1.25
+
diff --git a/resources/variants/dxu/dxu_umo_0.8.inst.cfg b/resources/variants/dxu/dxu_umo_0.8.inst.cfg
new file mode 100644
index 0000000000..d90ee59b12
--- /dev/null
+++ b/resources/variants/dxu/dxu_umo_0.8.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+definition = dxu_umo
+name = 0.8 mm
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 20
+type = variant
+
+[values]
+machine_nozzle_size = 0.8
+machine_nozzle_tip_outer_diameter = 1.35
+
diff --git a/resources/variants/dxu/dxu_umo_dual_0.25.inst.cfg b/resources/variants/dxu/dxu_umo_dual_0.25.inst.cfg
new file mode 100644
index 0000000000..d72350b1aa
--- /dev/null
+++ b/resources/variants/dxu/dxu_umo_dual_0.25.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+definition = dxu_umo_dual
+name = 0.25 mm
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 20
+type = variant
+
+[values]
+machine_nozzle_size = 0.25
+machine_nozzle_tip_outer_diameter = 0.8
+
diff --git a/resources/variants/dxu/dxu_umo_dual_0.4.inst.cfg b/resources/variants/dxu/dxu_umo_dual_0.4.inst.cfg
new file mode 100644
index 0000000000..121bfeeda3
--- /dev/null
+++ b/resources/variants/dxu/dxu_umo_dual_0.4.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+definition = dxu_umo_dual
+name = 0.4 mm
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 20
+type = variant
+
+[values]
+machine_nozzle_size = 0.4
+machine_nozzle_tip_outer_diameter = 1.05
+
diff --git a/resources/variants/dxu/dxu_umo_dual_0.6.inst.cfg b/resources/variants/dxu/dxu_umo_dual_0.6.inst.cfg
new file mode 100644
index 0000000000..3de74bf660
--- /dev/null
+++ b/resources/variants/dxu/dxu_umo_dual_0.6.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+definition = dxu_umo_dual
+name = 0.6 mm
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 20
+type = variant
+
+[values]
+machine_nozzle_size = 0.6
+machine_nozzle_tip_outer_diameter = 1.25
+
diff --git a/resources/variants/dxu/dxu_umo_dual_0.8.inst.cfg b/resources/variants/dxu/dxu_umo_dual_0.8.inst.cfg
new file mode 100644
index 0000000000..bbce69cbce
--- /dev/null
+++ b/resources/variants/dxu/dxu_umo_dual_0.8.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+definition = dxu_umo_dual
+name = 0.8 mm
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 20
+type = variant
+
+[values]
+machine_nozzle_size = 0.8
+machine_nozzle_tip_outer_diameter = 1.35
+
diff --git a/resources/variants/fusion3/fusion3_0.4.inst.cfg b/resources/variants/fusion3/fusion3_0.4.inst.cfg
new file mode 100644
index 0000000000..777a487695
--- /dev/null
+++ b/resources/variants/fusion3/fusion3_0.4.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+definition = fusion3_f410
+name = 0.4mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 20
+type = variant
+
+[values]
+machine_nozzle_size = 0.4
+
diff --git a/resources/variants/fusion3/fusion3_0.6.inst.cfg b/resources/variants/fusion3/fusion3_0.6.inst.cfg
new file mode 100644
index 0000000000..0d032e17f4
--- /dev/null
+++ b/resources/variants/fusion3/fusion3_0.6.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+definition = fusion3_f410
+name = 0.6mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 20
+type = variant
+
+[values]
+machine_nozzle_size = 0.6
+
diff --git a/resources/variants/fusion3/fusion3_0.8.inst.cfg b/resources/variants/fusion3/fusion3_0.8.inst.cfg
new file mode 100644
index 0000000000..33f192e528
--- /dev/null
+++ b/resources/variants/fusion3/fusion3_0.8.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+definition = fusion3_f410
+name = 0.8mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 20
+type = variant
+
+[values]
+machine_nozzle_size = 0.8
+
diff --git a/resources/variants/fusion3/fusion3_f410_0.4.inst.cfg b/resources/variants/fusion3/fusion3_f410_0.4.inst.cfg
new file mode 100644
index 0000000000..777a487695
--- /dev/null
+++ b/resources/variants/fusion3/fusion3_f410_0.4.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+definition = fusion3_f410
+name = 0.4mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 20
+type = variant
+
+[values]
+machine_nozzle_size = 0.4
+
diff --git a/resources/variants/fusion3/fusion3_f410_0.6.inst.cfg b/resources/variants/fusion3/fusion3_f410_0.6.inst.cfg
new file mode 100644
index 0000000000..0d032e17f4
--- /dev/null
+++ b/resources/variants/fusion3/fusion3_f410_0.6.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+definition = fusion3_f410
+name = 0.6mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 20
+type = variant
+
+[values]
+machine_nozzle_size = 0.6
+
diff --git a/resources/variants/fusion3/fusion3_f410_0.8.inst.cfg b/resources/variants/fusion3/fusion3_f410_0.8.inst.cfg
new file mode 100644
index 0000000000..33f192e528
--- /dev/null
+++ b/resources/variants/fusion3/fusion3_f410_0.8.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+definition = fusion3_f410
+name = 0.8mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 20
+type = variant
+
+[values]
+machine_nozzle_size = 0.8
+