From 6e96e6086f0f2e6aa48964965ebf837932a6abeb Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Mehmet=20Suta=C5=9F?=
 <46458775+mehmetsutas@users.noreply.github.com>
Date: Tue, 12 Apr 2022 18:29:39 +0300
Subject: [PATCH] More tweaks

---
 resources/definitions/rigid3d_base.def.json                   | 3 ++-
 .../rigid3d_base/tpu/rigid3d_base_tpu_adaptive.inst.cfg       | 4 ++--
 .../quality/rigid3d_base/tpu/rigid3d_base_tpu_good.inst.cfg   | 4 ++--
 .../quality/rigid3d_base/tpu/rigid3d_base_tpu_low.inst.cfg    | 4 ++--
 .../rigid3d_base/tpu/rigid3d_base_tpu_standard.inst.cfg       | 4 ++--
 .../quality/rigid3d_base/tpu/rigid3d_base_tpu_super.inst.cfg  | 4 ++--
 .../quality/rigid3d_base/tpu/rigid3d_base_tpu_ultra.inst.cfg  | 4 ++--
 7 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/resources/definitions/rigid3d_base.def.json b/resources/definitions/rigid3d_base.def.json
index 4397930c80..e805bbe16a 100644
--- a/resources/definitions/rigid3d_base.def.json
+++ b/resources/definitions/rigid3d_base.def.json
@@ -97,6 +97,7 @@
 
         "optimize_wall_printing_order": { "value": "True" },
         "inset_direction": { "value": "'outside_in'" },
+        "xy_offset_layer_0": { "value": -0.2 },
         "z_seam_type": { "value": "'back'" },
         "z_seam_position": { "value": "'backleft'" },
 
@@ -112,7 +113,7 @@
         "speed_print": { "value": 60.0 } ,
         "speed_topbottom": { "value": "speed_print" },
         "speed_support_interface": { "value": "speed_support" },
-        "speed_travel": { "value": 100.0 },
+        "speed_travel": { "value": 80.0 },
         "speed_z_hop": { "value": 8.0 },
 
         "acceleration_print": { "value": 500 },		
diff --git a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_adaptive.inst.cfg b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_adaptive.inst.cfg
index 0bbf74e3b2..d4bf310ce7 100644
--- a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_adaptive.inst.cfg
+++ b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_adaptive.inst.cfg
@@ -10,8 +10,8 @@ quality_type = adaptive
 material = generic_tpu
 
 [values]
-default_material_print_temperature = 250
-default_material_bed_temperature = 70
+default_material_print_temperature = 240
+default_material_bed_temperature = 60
 speed_print = 20
 retraction_speed = 20
 retraction_amount = 3
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_good.inst.cfg b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_good.inst.cfg
index 53eed1dac9..0cdb560118 100644
--- a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_good.inst.cfg
+++ b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_good.inst.cfg
@@ -10,8 +10,8 @@ quality_type = good
 material = generic_tpu
 
 [values]
-default_material_print_temperature = 245
-default_material_bed_temperature = 70
+default_material_print_temperature = 235
+default_material_bed_temperature = 60
 speed_print = 20
 retraction_speed = 20
 retraction_amount = 3
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_low.inst.cfg b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_low.inst.cfg
index 496f4c5a4a..ca5e599b22 100644
--- a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_low.inst.cfg
+++ b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_low.inst.cfg
@@ -10,8 +10,8 @@ quality_type = low
 material = generic_tpu
 
 [values]
-default_material_print_temperature = 250
-default_material_bed_temperature = 70
+default_material_print_temperature = 240
+default_material_bed_temperature = 60
 speed_print = 20
 retraction_speed = 20
 retraction_amount = 3
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_standard.inst.cfg b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_standard.inst.cfg
index 263ab96ee7..056060e323 100644
--- a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_standard.inst.cfg
+++ b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_standard.inst.cfg
@@ -10,8 +10,8 @@ quality_type = standard
 material = generic_tpu
 
 [values]
-default_material_print_temperature = 245
-default_material_bed_temperature = 70
+default_material_print_temperature = 235
+default_material_bed_temperature = 60
 speed_print = 20
 retraction_speed = 20
 retraction_amount = 3
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_super.inst.cfg b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_super.inst.cfg
index 73f59d3109..76fb5cf210 100644
--- a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_super.inst.cfg
+++ b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_super.inst.cfg
@@ -10,8 +10,8 @@ quality_type = super
 material = generic_tpu
 
 [values]
-default_material_print_temperature = 245
-default_material_bed_temperature = 70
+default_material_print_temperature = 235
+default_material_bed_temperature = 60
 speed_print = 20
 retraction_speed = 20
 retraction_amount = 3
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_ultra.inst.cfg b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_ultra.inst.cfg
index bacaca0f0e..6daf915e12 100644
--- a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_ultra.inst.cfg
+++ b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_ultra.inst.cfg
@@ -10,8 +10,8 @@ quality_type = ultra
 material = generic_tpu
 
 [values]
-default_material_print_temperature = 245
-default_material_bed_temperature = 70
+default_material_print_temperature = 235
+default_material_bed_temperature = 60
 speed_print = 20
 retraction_speed = 20
 retraction_amount = 3
\ No newline at end of file