diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json
index c6642e8d94..8f3bfede03 100644
--- a/resources/definitions/fdmprinter.def.json
+++ b/resources/definitions/fdmprinter.def.json
@@ -1274,32 +1274,32 @@
                             "value": "travel_compensate_overlapping_walls_enabled",
                             "limit_to_extruder": "wall_x_extruder_nr",
                             "settable_per_mesh": true
-                        },
-                        "wall_min_flow":
-                        {
-                            "label": "Minimum Wall Flow",
-                            "description": "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls.",
-                            "unit": "%",
-                            "minimum_value": "0",
-                            "maximum_value": "100",
-                            "default_value": 0,
-                            "type": "float",
-                            "enabled": "travel_compensate_overlapping_walls_0_enabled or travel_compensate_overlapping_walls_x_enabled",
-                            "settable_per_mesh": false,
-                            "settable_per_extruder": true
-                        },
-                        "wall_min_flow_retract":
-                        {
-                            "label": "Prefer Retract",
-                            "description": "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold.",
-                            "type": "bool",
-                            "default_value": false,
-                            "enabled": "(travel_compensate_overlapping_walls_0_enabled or travel_compensate_overlapping_walls_x_enabled) and wall_min_flow > 0",
-                            "settable_per_mesh": false,
-                            "settable_per_extruder": true
                         }
                     }
                 },
+                "wall_min_flow":
+                {
+                    "label": "Minimum Wall Flow",
+                    "description": "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls.",
+                    "unit": "%",
+                    "minimum_value": "0",
+                    "maximum_value": "100",
+                    "default_value": 0,
+                    "type": "float",
+                    "enabled": "travel_compensate_overlapping_walls_0_enabled or travel_compensate_overlapping_walls_x_enabled",
+                    "settable_per_mesh": false,
+                    "settable_per_extruder": true
+                },
+                "wall_min_flow_retract":
+                {
+                    "label": "Prefer Retract",
+                    "description": "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold.",
+                    "type": "bool",
+                    "default_value": false,
+                    "enabled": "(travel_compensate_overlapping_walls_0_enabled or travel_compensate_overlapping_walls_x_enabled) and wall_min_flow > 0",
+                    "settable_per_mesh": false,
+                    "settable_per_extruder": true
+                },
                 "fill_perimeter_gaps":
                 {
                     "label": "Fill Gaps Between Walls",