diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
index 3a559df3e8..8de84ae586 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
@@ -12,21 +12,8 @@ setting_version = 1
 
 [values]
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 7
@@ -34,34 +21,19 @@ cool_min_speed = 2.5
 infill_line_width = =round(line_width * 0.38 / 0.38, 2)
 infill_overlap = 0
 infill_pattern = tetrahedral
-infill_sparse_density = 20
 infill_wipe_dist = 0.1
 jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
 layer_height = 0.2
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 85
 material_bed_temperature_layer_0 = 90
 material_final_print_temperature = 205
-material_flow = 100
 material_initial_print_temperature = 210
 material_print_temperature = 215
 material_print_temperature_layer_0 = 220
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
@@ -75,33 +47,19 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-retraction_speed = 35
-skin_overlap = 15
 speed_equalize_flow_enabled = True
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 300
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
-speed_wall_x = =speed_wall
 support_angle = 50
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
-top_bottom_thickness = 1.2
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
index 23bbce605c..81e018a742 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
@@ -12,21 +12,8 @@ setting_version = 1
 
 [values]
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 7
@@ -34,39 +21,23 @@ cool_min_speed = 2.5
 infill_line_width = =round(line_width * 0.38 / 0.38, 2)
 infill_overlap = 0
 infill_pattern = tetrahedral
-infill_sparse_density = 20
 infill_wipe_dist = 0.1
 jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
 layer_height = 0.15
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 85
 material_bed_temperature_layer_0 = 90
 material_final_print_temperature = 195
-material_flow = 100
 material_initial_print_temperature = 205
 material_print_temperature = 207
 material_print_temperature_layer_0 = 210
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_amount = 7
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
@@ -75,33 +46,20 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-retraction_speed = 35
-skin_overlap = 15
 speed_equalize_flow_enabled = True
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 300
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
-speed_wall_x = =speed_wall
 support_angle = 50
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
index e0e9fd3234..62cc558ff6 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
@@ -12,21 +12,8 @@ setting_version = 1
 
 [values]
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 7
@@ -34,39 +21,22 @@ cool_min_speed = 2.5
 infill_line_width = =round(line_width * 0.38 / 0.38, 2)
 infill_overlap = 0
 infill_pattern = tetrahedral
-infill_sparse_density = 20
 infill_wipe_dist = 0.1
 jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.1
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 85
 material_bed_temperature_layer_0 = 90
 material_final_print_temperature = 195
-material_flow = 100
 material_initial_print_temperature = 200
 material_print_temperature = 205
 material_print_temperature_layer_0 = 208
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_amount = 7
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
@@ -75,33 +45,20 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-retraction_speed = 35
-skin_overlap = 15
 speed_equalize_flow_enabled = True
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 300
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
-speed_wall_x = =speed_wall
 support_angle = 50
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
index 8c6318a698..59600a00ae 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
@@ -36,9 +36,7 @@ material_flow = 106
 material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
-prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.8
@@ -48,6 +46,7 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
+skin_overlap = 5
 speed_equalize_flow_enabled = True
 speed_layer_0 = 18
 speed_print = 25
@@ -56,7 +55,6 @@ speed_travel = 300
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
 support_angle = 50
-skin_overlap = 5
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
@@ -64,4 +62,4 @@ top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
 wall_line_width_x = =line_width
-wall_thickness = 0.76
+wall_thickness = 0.76
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
index 129135f6a1..3cae3e53c9 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
@@ -36,9 +36,7 @@ material_flow = 106
 material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
-prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_amount = 7
 retraction_count_max = 12
@@ -65,4 +63,4 @@ top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
 wall_line_width_x = =line_width
-wall_thickness = 0.76
+wall_thickness = 0.76
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
index eb71f1ef3f..96146c5b68 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -34,9 +34,7 @@ material_final_print_temperature = =material_print_temperature - 21
 material_flow = 106
 material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature_layer_0 = =default_material_print_temperature
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
-prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.8
@@ -62,4 +60,4 @@ top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
 wall_line_width_x = =line_width
-wall_thickness = 0.76
+wall_thickness = 0.76
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Draft_Print.inst.cfg
index a40339e9c9..31a900dfb6 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Draft_Print.inst.cfg
@@ -11,88 +11,26 @@ weight = -2
 setting_version = 1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
-cool_fan_speed = 8
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
 infill_before_walls = True
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
-layer_height = 0.2
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.9375
-machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_bed_temperature = 107
 material_print_temperature = =default_material_print_temperature - 10
 material_print_temperature_layer_0 = =material_print_temperature
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-prime_tower_enable = False
-prime_tower_wipe_enabled = True
-retraction_amount = 6.5
 retraction_combing = off
-retraction_count_max = 25
-retraction_extrusion_window = 1
 retraction_hop = 0.1
 retraction_hop_enabled = False
-retraction_hop_only_when_collides = True
 skin_overlap = 0
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 50
 speed_slowdown_layers = 15
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
 support_bottom_distance = =support_z_distance
 support_line_width = =round(line_width * 0.6 / 0.7, 2)
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height
-switch_extruder_retraction_amount = 16.5
 top_bottom_thickness = 1.2
-travel_avoid_distance = 1.5
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2
+travel_avoid_distance = 1.5
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg
index 8b1fbabea8..ca43a195aa 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg
@@ -11,88 +11,28 @@ weight = -2
 setting_version = 1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
-cool_fan_speed = 8
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
 infill_before_walls = True
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
 layer_height = 0.4
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.9375
-machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_bed_temperature = 107
-material_print_temperature = =default_material_print_temperature - 5 
+material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
 prime_tower_enable = True
-prime_tower_wipe_enabled = True
-retraction_amount = 6.5
 retraction_combing = off
-retraction_count_max = 25
-retraction_extrusion_window = 1
 retraction_hop = 0.1
 retraction_hop_enabled = False
-retraction_hop_only_when_collides = True
 skin_overlap = 0
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 50
 speed_slowdown_layers = 8
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
 support_bottom_distance = =support_z_distance
 support_line_width = =round(line_width * 0.6 / 0.7, 2)
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height
-switch_extruder_retraction_amount = 16.5
 top_bottom_thickness = 1.2
-travel_avoid_distance = 1.5
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2
+travel_avoid_distance = 1.5
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg
index a478ea8b8a..f38bef84c1 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg
@@ -11,88 +11,28 @@ weight = -1
 setting_version = 1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
-cool_fan_speed = 8
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
 infill_before_walls = True
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
 layer_height = 0.3
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.9375
-machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_bed_temperature = 107
 material_print_temperature = =default_material_print_temperature - 7
 material_print_temperature_layer_0 = =material_print_temperature
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
 prime_tower_enable = True
-prime_tower_wipe_enabled = True
-retraction_amount = 6.5
 retraction_combing = off
-retraction_count_max = 25
-retraction_extrusion_window = 1
 retraction_hop = 0.1
 retraction_hop_enabled = False
-retraction_hop_only_when_collides = True
 skin_overlap = 0
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 50
 speed_slowdown_layers = 10
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
 support_bottom_distance = =support_z_distance
 support_line_width = =round(line_width * 0.6 / 0.7, 2)
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height
-switch_extruder_retraction_amount = 16.5
 top_bottom_thickness = 1.2
-travel_avoid_distance = 1.5
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2
+travel_avoid_distance = 1.5
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Draft_Print.inst.cfg
index c03e7bc385..b262aeef34 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Draft_Print.inst.cfg
@@ -11,91 +11,20 @@ weight = 0
 setting_version = 1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
-cool_fan_speed = 5
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
 infill_before_walls = True
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
-layer_height = 0.2
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 107
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-prime_tower_enable = False
-prime_tower_wipe_enabled = True
 raft_airgap = 0.5
 raft_margin = 15
-retract_at_layer_change = True
-retraction_amount = 6.5
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
 skin_overlap = 0
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 50
 speed_slowdown_layers = 15
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
 support_line_width = =round(line_width * 0.6 / 0.7, 2)
-support_pattern = zigzag
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-switch_extruder_retraction_amount = 16.5
-top_bottom_thickness = 1.4
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2
+travel_avoid_distance = 3
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg
index eed4fbf3a6..0285d492da 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg
@@ -11,91 +11,20 @@ weight = -2
 setting_version = 1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
-cool_fan_speed = 5
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
 infill_before_walls = True
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
 layer_height = 0.4
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 107
-material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-prime_tower_enable = False
-prime_tower_wipe_enabled = True
 raft_airgap = 0.5
 raft_margin = 15
-retract_at_layer_change = True
-retraction_amount = 6.5
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
 skin_overlap = 0
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 50
 speed_slowdown_layers = 8
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
 support_line_width = =round(line_width * 0.6 / 0.7, 2)
-support_pattern = zigzag
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-switch_extruder_retraction_amount = 16.5
-top_bottom_thickness = 1.4
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2
+travel_avoid_distance = 3
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg
index c1a15d3ddc..96609d7bda 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg
@@ -11,91 +11,21 @@ weight = -1
 setting_version = 1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
-cool_fan_speed = 5
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
 infill_before_walls = True
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
 layer_height = 0.3
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 107
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-prime_tower_enable = False
-prime_tower_wipe_enabled = True
 raft_airgap = 0.5
 raft_margin = 15
-retract_at_layer_change = True
-retraction_amount = 6.5
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
 skin_overlap = 0
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 50
 speed_slowdown_layers = 10
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
 support_line_width = =round(line_width * 0.6 / 0.7, 2)
-support_pattern = zigzag
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-switch_extruder_retraction_amount = 16.5
-top_bottom_thickness = 1.4
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2
+travel_avoid_distance = 3
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
index 5c86daff89..a9ad0a58bd 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ setting_version = 1
 
 [values]
 brim_width = 25
-cool_fan_speed = 10
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 expand_skins_expand_distance = =line_width * 2
@@ -21,15 +20,12 @@ expand_upper_skins = True
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-infill_sparse_density = 20
 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
 jerk_support = =math.ceil(jerk_print * 25 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 material_bed_temperature_layer_0 = =material_bed_temperature
-material_flow = 100
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
@@ -38,17 +34,11 @@ retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
-retraction_hop_only_when_collides = True
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
 skin_line_width = =round(line_width * 0.78 / 0.8, 2)
-skin_overlap = 5
-speed_print = 35
-speed_topbottom = =math.ceil(speed_print * 25 / 35)
 speed_travel = 300
-speed_wall = =math.ceil(speed_print * 30 / 35)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
-support_angle = 60
 support_bottom_distance = =support_z_distance
 support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
@@ -59,5 +49,4 @@ top_bottom_thickness = 1.6
 travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
-wall_thickness = 1.6
-
+wall_thickness = 1.6
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
index 7dd422b300..74ab389d56 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -12,7 +12,6 @@ setting_version = 1
 
 [values]
 brim_width = 25
-cool_fan_speed = 10
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 expand_skins_expand_distance = =line_width * 2
@@ -21,15 +20,12 @@ expand_upper_skins = True
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-infill_sparse_density = 20
 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
 jerk_support = =math.ceil(jerk_print * 25 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 material_bed_temperature_layer_0 = =material_bed_temperature
-material_flow = 100
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
@@ -38,17 +34,11 @@ retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
-retraction_hop_only_when_collides = True
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
 skin_line_width = =round(line_width * 0.78 / 0.8, 2)
-skin_overlap = 5
-speed_print = 35
-speed_topbottom = =math.ceil(speed_print * 25 / 35)
 speed_travel = 300
-speed_wall = =math.ceil(speed_print * 30 / 35)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
-support_angle = 60
 support_bottom_distance = =support_z_distance
 support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
@@ -59,5 +49,4 @@ top_bottom_thickness = 1.6
 travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
-wall_thickness = 1.6
-
+wall_thickness = 1.6
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
index 00958e7381..f51e116cac 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -12,7 +12,6 @@ setting_version = 1
 
 [values]
 brim_width = 25
-cool_fan_speed = 10
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 expand_skins_expand_distance = =line_width * 2
@@ -21,15 +20,12 @@ expand_upper_skins = True
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-infill_sparse_density = 20
 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
 jerk_support = =math.ceil(jerk_print * 25 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 layer_height = 0.3
 material_bed_temperature_layer_0 = =material_bed_temperature
-material_flow = 100
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
@@ -38,17 +34,11 @@ retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
-retraction_hop_only_when_collides = True
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
 skin_line_width = =round(line_width * 0.78 / 0.8, 2)
-skin_overlap = 5
-speed_print = 35
-speed_topbottom = =math.ceil(speed_print * 25 / 35)
 speed_travel = 300
-speed_wall = =math.ceil(speed_print * 30 / 35)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
-support_angle = 60
 support_bottom_distance = =support_z_distance
 support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
@@ -59,5 +49,4 @@ top_bottom_thickness = 1.6
 travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
-wall_thickness = 1.6
-
+wall_thickness = 1.6
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
index 33f1b7952a..4f5a8f99dd 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
@@ -33,7 +33,6 @@ material_flow = 105
 material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
@@ -42,7 +41,6 @@ retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
-retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
@@ -64,5 +62,4 @@ travel_avoid_distance = 1.5
 travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
-wall_thickness = 1.3
-
+wall_thickness = 1.3
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
index 42a819ec82..c91bf4c107 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -34,7 +34,6 @@ material_flow = 105
 material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
@@ -43,7 +42,6 @@ retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
-retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
@@ -65,5 +63,4 @@ travel_avoid_distance = 1.5
 travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
-wall_thickness = 1.3
-
+wall_thickness = 1.3
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
index dd3cc8fa68..78094b33b4 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -33,7 +33,6 @@ material_final_print_temperature = =material_print_temperature - 21
 material_flow = 105
 material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
@@ -42,7 +41,6 @@ retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
-retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
@@ -64,5 +62,4 @@ travel_avoid_distance = 1.5
 travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
-wall_thickness = 1.3
-
+wall_thickness = 1.3
\ No newline at end of file