From 71197e9101ed596be301a0f5ab32d13119d1fa04 Mon Sep 17 00:00:00 2001 From: Ghostkeeper Date: Fri, 23 Jun 2017 12:45:40 +0200 Subject: [PATCH] Optimise new profiles This removes all settings that are equal to the defaults. Some settings are 'common' between all profiles of the same material. I've let those settings bubble up to the material profiles but that change is then obviously only apparent in the fdm_materials repository. Contributes to issue CURA-3960. --- .../um3_aa0.4_PP_Draft_Print.inst.cfg | 42 ----------- .../um3_aa0.4_PP_Fast_Print.inst.cfg | 42 ----------- .../um3_aa0.4_PP_Normal_Quality.inst.cfg | 43 ----------- .../um3_aa0.4_TPU_Draft_Print.inst.cfg | 6 +- .../um3_aa0.4_TPU_Fast_Print.inst.cfg | 4 +- .../um3_aa0.4_TPU_Normal_Quality.inst.cfg | 4 +- .../um3_aa0.8_CPEP_Draft_Print.inst.cfg | 64 +--------------- .../um3_aa0.8_CPEP_Superdraft_Print.inst.cfg | 64 +--------------- .../um3_aa0.8_CPEP_Verydraft_Print.inst.cfg | 62 +--------------- .../um3_aa0.8_PC_Draft_Print.inst.cfg | 73 +------------------ .../um3_aa0.8_PC_Superdraft_Print.inst.cfg | 73 +------------------ .../um3_aa0.8_PC_Verydraft_Print.inst.cfg | 72 +----------------- .../um3_aa0.8_PP_Draft_Print.inst.cfg | 13 +--- .../um3_aa0.8_PP_Superdraft_Print.inst.cfg | 13 +--- .../um3_aa0.8_PP_Verydraft_Print.inst.cfg | 13 +--- .../um3_aa0.8_TPU_Draft_Print.inst.cfg | 5 +- .../um3_aa0.8_TPU_Superdraft_Print.inst.cfg | 5 +- .../um3_aa0.8_TPU_Verydraft_Print.inst.cfg | 5 +- 18 files changed, 17 insertions(+), 586 deletions(-) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg index 3a559df3e8..8de84ae586 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg @@ -12,21 +12,8 @@ setting_version = 1 [values] acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 20 cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 @@ -34,34 +21,19 @@ cool_min_speed = 2.5 infill_line_width = =round(line_width * 0.38 / 0.38, 2) infill_overlap = 0 infill_pattern = tetrahedral -infill_sparse_density = 20 infill_wipe_dist = 0.1 jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall layer_height = 0.2 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 85 material_bed_temperature_layer_0 = 90 material_final_print_temperature = 205 -material_flow = 100 material_initial_print_temperature = 210 material_print_temperature = 215 material_print_temperature_layer_0 = 220 -material_standby_temperature = 100 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 @@ -75,33 +47,19 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -retraction_speed = 35 -skin_overlap = 15 speed_equalize_flow_enabled = True -speed_infill = =speed_print speed_layer_0 = 15 -speed_prime_tower = =speed_topbottom speed_print = 25 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 300 speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) -speed_wall_x = =speed_wall support_angle = 50 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 -top_bottom_thickness = 1.2 travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True wall_0_inset = 0 wall_line_width_x = =line_width wall_thickness = =line_width * 3 \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg index 23bbce605c..81e018a742 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg @@ -12,21 +12,8 @@ setting_version = 1 [values] acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 20 cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 @@ -34,39 +21,23 @@ cool_min_speed = 2.5 infill_line_width = =round(line_width * 0.38 / 0.38, 2) infill_overlap = 0 infill_pattern = tetrahedral -infill_sparse_density = 20 infill_wipe_dist = 0.1 jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall layer_height = 0.15 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 85 material_bed_temperature_layer_0 = 90 material_final_print_temperature = 195 -material_flow = 100 material_initial_print_temperature = 205 material_print_temperature = 207 material_print_temperature_layer_0 = 210 -material_standby_temperature = 100 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True -retraction_amount = 7 retraction_count_max = 12 retraction_extra_prime_amount = 0.8 retraction_extrusion_window = 1 @@ -75,33 +46,20 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -retraction_speed = 35 -skin_overlap = 15 speed_equalize_flow_enabled = True -speed_infill = =speed_print speed_layer_0 = 15 -speed_prime_tower = =speed_topbottom speed_print = 25 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 300 speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) -speed_wall_x = =speed_wall support_angle = 50 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1.1 travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True wall_0_inset = 0 wall_line_width_x = =line_width wall_thickness = =line_width * 3 \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg index e0e9fd3234..62cc558ff6 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg @@ -12,21 +12,8 @@ setting_version = 1 [values] acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 20 cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 @@ -34,39 +21,22 @@ cool_min_speed = 2.5 infill_line_width = =round(line_width * 0.38 / 0.38, 2) infill_overlap = 0 infill_pattern = tetrahedral -infill_sparse_density = 20 infill_wipe_dist = 0.1 jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.1 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 85 material_bed_temperature_layer_0 = 90 material_final_print_temperature = 195 -material_flow = 100 material_initial_print_temperature = 200 material_print_temperature = 205 material_print_temperature_layer_0 = 208 -material_standby_temperature = 100 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True -retraction_amount = 7 retraction_count_max = 12 retraction_extra_prime_amount = 0.8 retraction_extrusion_window = 1 @@ -75,33 +45,20 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -retraction_speed = 35 -skin_overlap = 15 speed_equalize_flow_enabled = True -speed_infill = =speed_print speed_layer_0 = 15 -speed_prime_tower = =speed_topbottom speed_print = 25 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 300 speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) -speed_wall_x = =speed_wall support_angle = 50 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True wall_0_inset = 0 wall_line_width_x = =line_width wall_thickness = =line_width * 3 \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index 8c6318a698..59600a00ae 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -36,9 +36,7 @@ material_flow = 106 material_initial_print_temperature = =material_print_temperature - 16 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 -material_standby_temperature = 100 multiple_mesh_overlap = 0 -prime_tower_enable = True prime_tower_wipe_enabled = True retraction_count_max = 12 retraction_extra_prime_amount = 0.8 @@ -48,6 +46,7 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 +skin_overlap = 5 speed_equalize_flow_enabled = True speed_layer_0 = 18 speed_print = 25 @@ -56,7 +55,6 @@ speed_travel = 300 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 -skin_overlap = 5 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 @@ -64,4 +62,4 @@ top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 wall_line_width_x = =line_width -wall_thickness = 0.76 +wall_thickness = 0.76 \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg index 129135f6a1..3cae3e53c9 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg @@ -36,9 +36,7 @@ material_flow = 106 material_initial_print_temperature = =material_print_temperature - 16 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 -material_standby_temperature = 100 multiple_mesh_overlap = 0 -prime_tower_enable = True prime_tower_wipe_enabled = True retraction_amount = 7 retraction_count_max = 12 @@ -65,4 +63,4 @@ top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 wall_line_width_x = =line_width -wall_thickness = 0.76 +wall_thickness = 0.76 \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg index eb71f1ef3f..96146c5b68 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -34,9 +34,7 @@ material_final_print_temperature = =material_print_temperature - 21 material_flow = 106 material_initial_print_temperature = =material_print_temperature - 16 material_print_temperature_layer_0 = =default_material_print_temperature -material_standby_temperature = 100 multiple_mesh_overlap = 0 -prime_tower_enable = True prime_tower_wipe_enabled = True retraction_count_max = 12 retraction_extra_prime_amount = 0.8 @@ -62,4 +60,4 @@ top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 wall_line_width_x = =line_width -wall_thickness = 0.76 +wall_thickness = 0.76 \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Draft_Print.inst.cfg index a40339e9c9..31a900dfb6 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Draft_Print.inst.cfg @@ -11,88 +11,26 @@ weight = -2 setting_version = 1 [values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -cool_fan_speed = 8 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 infill_before_walls = True -infill_line_width = =round(line_width * 0.6 / 0.7, 2) -infill_overlap = 0 -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 25 / 25) -jerk_wall = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) -jerk_wall_x = =jerk_wall -layer_height = 0.2 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) line_width = =machine_nozzle_size * 0.9375 -machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_bed_temperature = 107 material_print_temperature = =default_material_print_temperature - 10 material_print_temperature_layer_0 = =material_print_temperature -material_initial_print_temperature = =material_print_temperature - 5 -material_final_print_temperature = =material_print_temperature - 10 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -prime_tower_enable = False -prime_tower_wipe_enabled = True -retraction_amount = 6.5 retraction_combing = off -retraction_count_max = 25 -retraction_extrusion_window = 1 retraction_hop = 0.1 retraction_hop_enabled = False -retraction_hop_only_when_collides = True skin_overlap = 0 -speed_infill = =speed_print speed_layer_0 = 15 -speed_prime_tower = =speed_topbottom speed_print = 50 speed_slowdown_layers = 15 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) -speed_wall_x = =speed_wall -support_angle = 60 support_bottom_distance = =support_z_distance support_line_width = =round(line_width * 0.6 / 0.7, 2) -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 support_z_distance = =layer_height -switch_extruder_retraction_amount = 16.5 top_bottom_thickness = 1.2 -travel_avoid_distance = 1.5 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =wall_line_width -wall_thickness = 2 +travel_avoid_distance = 1.5 \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg index 8b1fbabea8..ca43a195aa 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -11,88 +11,28 @@ weight = -2 setting_version = 1 [values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -cool_fan_speed = 8 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 infill_before_walls = True -infill_line_width = =round(line_width * 0.6 / 0.7, 2) -infill_overlap = 0 -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 25 / 25) -jerk_wall = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) -jerk_wall_x = =jerk_wall layer_height = 0.4 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) line_width = =machine_nozzle_size * 0.9375 -machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_bed_temperature = 107 -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature -material_initial_print_temperature = =material_print_temperature - 5 -material_final_print_temperature = =material_print_temperature - 10 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 prime_tower_enable = True -prime_tower_wipe_enabled = True -retraction_amount = 6.5 retraction_combing = off -retraction_count_max = 25 -retraction_extrusion_window = 1 retraction_hop = 0.1 retraction_hop_enabled = False -retraction_hop_only_when_collides = True skin_overlap = 0 -speed_infill = =speed_print speed_layer_0 = 15 -speed_prime_tower = =speed_topbottom speed_print = 50 speed_slowdown_layers = 8 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) -speed_wall_x = =speed_wall -support_angle = 60 support_bottom_distance = =support_z_distance support_line_width = =round(line_width * 0.6 / 0.7, 2) -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 support_z_distance = =layer_height -switch_extruder_retraction_amount = 16.5 top_bottom_thickness = 1.2 -travel_avoid_distance = 1.5 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =wall_line_width -wall_thickness = 2 +travel_avoid_distance = 1.5 \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg index a478ea8b8a..f38bef84c1 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -11,88 +11,28 @@ weight = -1 setting_version = 1 [values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -cool_fan_speed = 8 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 infill_before_walls = True -infill_line_width = =round(line_width * 0.6 / 0.7, 2) -infill_overlap = 0 -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 25 / 25) -jerk_wall = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) -jerk_wall_x = =jerk_wall layer_height = 0.3 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) line_width = =machine_nozzle_size * 0.9375 -machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_bed_temperature = 107 material_print_temperature = =default_material_print_temperature - 7 material_print_temperature_layer_0 = =material_print_temperature -material_initial_print_temperature = =material_print_temperature - 5 -material_final_print_temperature = =material_print_temperature - 10 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 prime_tower_enable = True -prime_tower_wipe_enabled = True -retraction_amount = 6.5 retraction_combing = off -retraction_count_max = 25 -retraction_extrusion_window = 1 retraction_hop = 0.1 retraction_hop_enabled = False -retraction_hop_only_when_collides = True skin_overlap = 0 -speed_infill = =speed_print speed_layer_0 = 15 -speed_prime_tower = =speed_topbottom speed_print = 50 speed_slowdown_layers = 10 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) -speed_wall_x = =speed_wall -support_angle = 60 support_bottom_distance = =support_z_distance support_line_width = =round(line_width * 0.6 / 0.7, 2) -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 support_z_distance = =layer_height -switch_extruder_retraction_amount = 16.5 top_bottom_thickness = 1.2 -travel_avoid_distance = 1.5 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =wall_line_width -wall_thickness = 2 +travel_avoid_distance = 1.5 \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Draft_Print.inst.cfg index c03e7bc385..b262aeef34 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Draft_Print.inst.cfg @@ -11,91 +11,20 @@ weight = 0 setting_version = 1 [values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -cool_fan_speed = 5 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 infill_before_walls = True -infill_line_width = =round(line_width * 0.6 / 0.7, 2) -infill_overlap = 0 -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 25 / 25) -jerk_wall = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) -jerk_wall_x = =jerk_wall -layer_height = 0.2 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 107 material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature -material_initial_print_temperature = =material_print_temperature - 5 -material_final_print_temperature = =material_print_temperature - 10 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -prime_tower_enable = False -prime_tower_wipe_enabled = True raft_airgap = 0.5 raft_margin = 15 -retract_at_layer_change = True -retraction_amount = 6.5 -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True skin_overlap = 0 -speed_infill = =speed_print speed_layer_0 = 15 -speed_prime_tower = =speed_topbottom speed_print = 50 speed_slowdown_layers = 15 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 support_line_width = =round(line_width * 0.6 / 0.7, 2) -support_pattern = zigzag -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -switch_extruder_retraction_amount = 16.5 -top_bottom_thickness = 1.4 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =wall_line_width -wall_thickness = 2 +travel_avoid_distance = 3 \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg index eed4fbf3a6..0285d492da 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -11,91 +11,20 @@ weight = -2 setting_version = 1 [values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -cool_fan_speed = 5 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 infill_before_walls = True -infill_line_width = =round(line_width * 0.6 / 0.7, 2) -infill_overlap = 0 -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 25 / 25) -jerk_wall = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) -jerk_wall_x = =jerk_wall layer_height = 0.4 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 107 -material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature -material_initial_print_temperature = =material_print_temperature - 5 -material_final_print_temperature = =material_print_temperature - 10 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -prime_tower_enable = False -prime_tower_wipe_enabled = True raft_airgap = 0.5 raft_margin = 15 -retract_at_layer_change = True -retraction_amount = 6.5 -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True skin_overlap = 0 -speed_infill = =speed_print speed_layer_0 = 15 -speed_prime_tower = =speed_topbottom speed_print = 50 speed_slowdown_layers = 8 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 support_line_width = =round(line_width * 0.6 / 0.7, 2) -support_pattern = zigzag -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -switch_extruder_retraction_amount = 16.5 -top_bottom_thickness = 1.4 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =wall_line_width -wall_thickness = 2 +travel_avoid_distance = 3 \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg index c1a15d3ddc..96609d7bda 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg @@ -11,91 +11,21 @@ weight = -1 setting_version = 1 [values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -cool_fan_speed = 5 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 infill_before_walls = True -infill_line_width = =round(line_width * 0.6 / 0.7, 2) -infill_overlap = 0 -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 25 / 25) -jerk_wall = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) -jerk_wall_x = =jerk_wall layer_height = 0.3 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 107 material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature -material_initial_print_temperature = =material_print_temperature - 5 -material_final_print_temperature = =material_print_temperature - 10 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -prime_tower_enable = False -prime_tower_wipe_enabled = True raft_airgap = 0.5 raft_margin = 15 -retract_at_layer_change = True -retraction_amount = 6.5 -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True skin_overlap = 0 -speed_infill = =speed_print speed_layer_0 = 15 -speed_prime_tower = =speed_topbottom speed_print = 50 speed_slowdown_layers = 10 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 support_line_width = =round(line_width * 0.6 / 0.7, 2) -support_pattern = zigzag -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -switch_extruder_retraction_amount = 16.5 -top_bottom_thickness = 1.4 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =wall_line_width -wall_thickness = 2 +travel_avoid_distance = 3 \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index 5c86daff89..a9ad0a58bd 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -12,7 +12,6 @@ setting_version = 1 [values] brim_width = 25 -cool_fan_speed = 10 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 expand_skins_expand_distance = =line_width * 2 @@ -21,15 +20,12 @@ expand_upper_skins = True infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -infill_sparse_density = 20 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) jerk_support = =math.ceil(jerk_print * 25 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) material_bed_temperature_layer_0 = =material_bed_temperature -material_flow = 100 material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 -material_standby_temperature = 100 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 @@ -38,17 +34,11 @@ retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 -retraction_hop_only_when_collides = True retraction_min_travel = 1.5 retraction_prime_speed = 15 skin_line_width = =round(line_width * 0.78 / 0.8, 2) -skin_overlap = 5 -speed_print = 35 -speed_topbottom = =math.ceil(speed_print * 25 / 35) speed_travel = 300 -speed_wall = =math.ceil(speed_print * 30 / 35) speed_wall_x = =math.ceil(speed_wall * 30 / 30) -support_angle = 60 support_bottom_distance = =support_z_distance support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width @@ -59,5 +49,4 @@ top_bottom_thickness = 1.6 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) -wall_thickness = 1.6 - +wall_thickness = 1.6 \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index 7dd422b300..74ab389d56 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -12,7 +12,6 @@ setting_version = 1 [values] brim_width = 25 -cool_fan_speed = 10 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 expand_skins_expand_distance = =line_width * 2 @@ -21,15 +20,12 @@ expand_upper_skins = True infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -infill_sparse_density = 20 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) jerk_support = =math.ceil(jerk_print * 25 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) material_bed_temperature_layer_0 = =material_bed_temperature -material_flow = 100 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 -material_standby_temperature = 100 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 @@ -38,17 +34,11 @@ retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 -retraction_hop_only_when_collides = True retraction_min_travel = 1.5 retraction_prime_speed = 15 skin_line_width = =round(line_width * 0.78 / 0.8, 2) -skin_overlap = 5 -speed_print = 35 -speed_topbottom = =math.ceil(speed_print * 25 / 35) speed_travel = 300 -speed_wall = =math.ceil(speed_print * 30 / 35) speed_wall_x = =math.ceil(speed_wall * 30 / 30) -support_angle = 60 support_bottom_distance = =support_z_distance support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width @@ -59,5 +49,4 @@ top_bottom_thickness = 1.6 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) -wall_thickness = 1.6 - +wall_thickness = 1.6 \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index 00958e7381..f51e116cac 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -12,7 +12,6 @@ setting_version = 1 [values] brim_width = 25 -cool_fan_speed = 10 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 expand_skins_expand_distance = =line_width * 2 @@ -21,15 +20,12 @@ expand_upper_skins = True infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -infill_sparse_density = 20 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) jerk_support = =math.ceil(jerk_print * 25 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) layer_height = 0.3 material_bed_temperature_layer_0 = =material_bed_temperature -material_flow = 100 material_print_temperature_layer_0 = =default_material_print_temperature + 2 -material_standby_temperature = 100 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 @@ -38,17 +34,11 @@ retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 -retraction_hop_only_when_collides = True retraction_min_travel = 1.5 retraction_prime_speed = 15 skin_line_width = =round(line_width * 0.78 / 0.8, 2) -skin_overlap = 5 -speed_print = 35 -speed_topbottom = =math.ceil(speed_print * 25 / 35) speed_travel = 300 -speed_wall = =math.ceil(speed_print * 30 / 35) speed_wall_x = =math.ceil(speed_wall * 30 / 30) -support_angle = 60 support_bottom_distance = =support_z_distance support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width @@ -59,5 +49,4 @@ top_bottom_thickness = 1.6 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) -wall_thickness = 1.6 - +wall_thickness = 1.6 \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index 33f1b7952a..4f5a8f99dd 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -33,7 +33,6 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 16 material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 -material_standby_temperature = 100 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 @@ -42,7 +41,6 @@ retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 -retraction_hop_enabled = True retraction_hop_only_when_collides = False retraction_min_travel = 0.8 retraction_prime_speed = 15 @@ -64,5 +62,4 @@ travel_avoid_distance = 1.5 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) -wall_thickness = 1.3 - +wall_thickness = 1.3 \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index 42a819ec82..c91bf4c107 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -34,7 +34,6 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 16 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 -material_standby_temperature = 100 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 @@ -43,7 +42,6 @@ retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 -retraction_hop_enabled = True retraction_hop_only_when_collides = False retraction_min_travel = 0.8 retraction_prime_speed = 15 @@ -65,5 +63,4 @@ travel_avoid_distance = 1.5 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) -wall_thickness = 1.3 - +wall_thickness = 1.3 \ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index dd3cc8fa68..78094b33b4 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -33,7 +33,6 @@ material_final_print_temperature = =material_print_temperature - 21 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 16 material_print_temperature_layer_0 = =default_material_print_temperature + 2 -material_standby_temperature = 100 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 @@ -42,7 +41,6 @@ retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 -retraction_hop_enabled = True retraction_hop_only_when_collides = False retraction_min_travel = 0.8 retraction_prime_speed = 15 @@ -64,5 +62,4 @@ travel_avoid_distance = 1.5 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) -wall_thickness = 1.3 - +wall_thickness = 1.3 \ No newline at end of file