follow the default settings

PP-71

resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.4
 weight = -2
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.4
 weight = -1
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.4
 weight = -2
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.4
 weight = -1
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.4
 weight = -2
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.4
 weight = -1
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.4
 weight = -2
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.4
 weight = -1
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg

@@ -13,8 +13,6 @@ variant = CC 0.4
 weight = -2
 
 [values]
-cool_fan_speed_max = =100
-cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75

resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg

@@ -13,8 +13,6 @@ variant = CC 0.4
 weight = -1
 
 [values]
-cool_fan_speed_max = =100
-cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75

resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.6
 weight = -2
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.6
 weight = -2
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.6
 weight = -2
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.6
 weight = -2
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg

@@ -13,8 +13,6 @@ variant = CC 0.6
 weight = -2
 
 [values]
-cool_fan_speed_max = =100
-cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75

resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg

@@ -13,8 +13,6 @@ variant = CC 0.6
 weight = -1
 
 [values]
-cool_fan_speed_max = =100
-cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75

resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.25
 weight = 0
 
 [values]
-cool_fan_speed = 40
 infill_overlap = =0 if infill_sparse_density > 80 else 15
 material_final_print_temperature = =material_print_temperature - 5
 speed_topbottom = =math.ceil(speed_print * 30 / 55)

resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.25
 weight = 0
 
 [values]
-cool_min_layer_time_fan_speed_max = 20
-cool_min_speed = 12
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
@@ -26,4 +24,3 @@ speed_wall = =math.ceil(speed_print * 30 / 70)
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-

resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg

@@ -14,9 +14,6 @@ weight = 0
 
 [values]
 brim_width = 20
-cool_fan_speed_max = 50
-cool_min_layer_time_fan_speed_max = 5
-cool_min_speed = 5
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
@@ -38,4 +35,3 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-

resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg

@@ -13,7 +13,6 @@ weight = 0
 
 [values]
 brim_width = 8
-cool_min_speed = 10
 infill_overlap = =0 if infill_sparse_density > 80 else 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 machine_nozzle_cool_down_speed = 0.9

resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg

@@ -14,9 +14,7 @@ weight = 0
 
 [values]
 brim_width = 10
-cool_fan_speed_max = 100
+cool_min_temperature = =material_print_temperature - 10
-cool_min_layer_time_fan_speed_max = 5
-cool_min_speed = 2.5
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
@@ -43,4 +41,3 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1
 travel_avoid_distance = 3
 wall_0_inset = 0
-

resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg

@@ -13,7 +13,6 @@ weight = 0
 
 [values]
 brim_width = 8
-cool_min_speed = 7
 infill_overlap = =0 if infill_sparse_density > 80 else 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 machine_nozzle_cool_down_speed = 0.9

resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -1
 
 [values]
-cool_min_speed = 7
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
@@ -25,4 +24,3 @@ speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-

resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = 1
 
 [values]
-cool_min_speed = 12
 machine_nozzle_cool_down_speed = 0.8
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
@@ -24,4 +23,3 @@ speed_infill = =math.ceil(speed_print * 40 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 30 / 50)
-

resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg

@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 brim_replaces_support = False
-cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
@@ -29,4 +28,3 @@ support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 top_bottom_thickness = 1
-

resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg

@@ -13,7 +13,6 @@ weight = -1
 
 [values]
 brim_replaces_support = False
-cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
@@ -29,4 +28,3 @@ support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
 top_bottom_thickness = 1
-

resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg

@@ -13,8 +13,6 @@ weight = 0
 
 [values]
 brim_replaces_support = False
-cool_fan_speed_max = =cool_fan_speed
-cool_min_speed = 7
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
@@ -27,4 +25,3 @@ support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
 top_bottom_thickness = 1
-

resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg

@@ -14,7 +14,6 @@ weight = -3
 
 [values]
 brim_replaces_support = False
-cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
@@ -30,4 +29,3 @@ support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
 support_top_distance = 0.3
 top_bottom_thickness = 1
-

resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.4
 weight = -2
 
 [values]
-cool_fan_speed_max = 80
-cool_min_speed = 5
 infill_overlap = 0
 infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15

resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.4
 weight = -1
 
 [values]
-cool_fan_speed_max = 80
-cool_min_speed = 6
 infill_overlap = 0
 infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15

resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.4
 weight = 1
 
 [values]
-cool_fan_speed_max = 50
-cool_min_speed = 5
 infill_overlap = 0
 infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15

resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.4
 weight = 0
 
 [values]
-cool_fan_speed_max = 50
-cool_min_speed = 7
 infill_overlap = 0
 infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15

resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -1
 
 [values]
-cool_min_speed = 7
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5

resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = 1
 
 [values]
-cool_min_speed = 12
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5

resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.4
 weight = -2
 
 [values]
-cool_min_layer_time_fan_speed_max = 20
-cool_min_speed = 10
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10

resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.4
 weight = -1
 
 [values]
-cool_min_layer_time_fan_speed_max = 20
-cool_min_speed = 10
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5

resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.4
 weight = 1
 
 [values]
-cool_min_layer_time_fan_speed_max = 20
-cool_min_speed = 15
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 ooze_shield_angle = 40

resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.4
 weight = 0
 
 [values]
-cool_min_layer_time_fan_speed_max = 20
-cool_min_speed = 12
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 ooze_shield_angle = 40

resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg

@@ -13,9 +13,6 @@ weight = -2
 
 [values]
 brim_width = 20
-cool_fan_speed_max = 90
-cool_min_layer_time_fan_speed_max = 5
-cool_min_speed = 6
 infill_overlap = 0
 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'

resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg

@@ -13,9 +13,6 @@ weight = -1
 
 [values]
 brim_width = 20
-cool_fan_speed_max = 85
-cool_min_layer_time_fan_speed_max = 5
-cool_min_speed = 7
 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1

resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg

@@ -13,9 +13,6 @@ weight = 1
 
 [values]
 brim_width = 20
-cool_fan_speed_max = 50
-cool_min_layer_time_fan_speed_max = 5
-cool_min_speed = 8
 infill_overlap = 0
 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'

resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg

@@ -13,9 +13,6 @@ weight = 0
 
 [values]
 brim_width = 20
-cool_fan_speed_max = 50
-cool_min_layer_time_fan_speed_max = 5
-cool_min_speed = 5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1

resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -1
 
 [values]
-cool_min_speed = 7
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5

resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = 1
 
 [values]
-cool_min_speed = 12
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5

resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg

@@ -14,7 +14,6 @@ weight = -2
 [values]
 acceleration_wall = 2000
 acceleration_wall_0 = 2000
-cool_fan_speed_max = =cool_fan_speed
 infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
@@ -27,4 +26,3 @@ speed_topbottom = =math.ceil(speed_print * 40 / 70)
 speed_wall = =math.ceil(speed_print * 55 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 45 / 50)
 top_bottom_thickness = 0.8
-

resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -1
 
 [values]
-cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = False
@@ -23,4 +22,3 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 45 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 70)
 top_bottom_thickness = 1
-

resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.4
 weight = 1
 
 [values]
-cool_fan_speed_max = =cool_fan_speed
-cool_min_speed = 10
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
@@ -25,4 +23,3 @@ speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 35 / 50)
 top_bottom_thickness = 1
-

resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.4
 weight = 0
 
 [values]
-cool_fan_speed_max = =cool_fan_speed
-cool_min_speed = 7
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = False
@@ -21,4 +19,3 @@ raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 top_bottom_thickness = 1
-

resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg

@@ -17,7 +17,6 @@ acceleration_print = 2000
 acceleration_topbottom = 1000
 acceleration_wall = 1500
 acceleration_wall_0 = 1000
-cool_fan_speed_max = =cool_fan_speed
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.75
@@ -31,4 +30,3 @@ speed_print = 50
 speed_wall = 50
 top_bottom_thickness = 0.9
 wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
-

resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg

@@ -13,10 +13,7 @@ weight = -2
 
 [values]
 brim_width = 20
-cool_fan_speed_max = 100
+cool_min_temperature = =material_print_temperature - 10
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 7
-cool_min_speed = 2.5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
@@ -44,4 +41,3 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-

resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg

@@ -13,10 +13,7 @@ weight = -1
 
 [values]
 brim_width = 20
-cool_fan_speed_max = 100
+cool_min_temperature = =material_print_temperature - 10
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 7
-cool_min_speed = 2.5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
@@ -45,4 +42,3 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1.1
 wall_0_inset = 0
-

resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg

@@ -13,10 +13,7 @@ weight = 0
 
 [values]
 brim_width = 20
-cool_fan_speed_max = 100
+cool_min_temperature = =material_print_temperature - 10
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 7
-cool_min_speed = 2.5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
@@ -45,4 +42,3 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1
 wall_0_inset = 0
-

resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.4
 weight = -2
 
 [values]
-cool_fan_speed_max = =cool_fan_speed
-cool_min_speed = 7
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 10
@@ -26,4 +24,3 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 36 / 50)
 speed_wall_0 = =math.ceil(speed_print * 26 / 50)
 top_bottom_thickness = 1.2
-

resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -1
 
 [values]
-cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 10
@@ -23,4 +22,3 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
 top_bottom_thickness = 1.2
-

resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.4
 weight = 1
 
 [values]
-cool_fan_speed_max = =cool_fan_speed
-cool_min_speed = 10
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
@@ -25,4 +23,3 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
 top_bottom_thickness = 1.2
-

resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.4
 weight = 0
 
 [values]
-cool_fan_speed_max = =cool_fan_speed
-cool_min_speed = 7
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
@@ -25,4 +23,3 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
 top_bottom_thickness = 1.2
-

resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg

@@ -17,7 +17,6 @@ acceleration_print = 2000
 acceleration_topbottom = 1000
 acceleration_wall = 1500
 acceleration_wall_0 = 1000
-cool_fan_speed_max = =cool_fan_speed
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.75
@@ -31,4 +30,3 @@ speed_print = 50
 speed_wall = 50
 top_bottom_thickness = 1.2
 wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
-

resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg

@@ -13,9 +13,6 @@ weight = -2
 
 [values]
 brim_width = 8.75
-cool_fan_speed_max = 100
-cool_min_layer_time_fan_speed_max = 6
-cool_min_speed = 4
 gradual_infill_step_height = =5 * layer_height
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'

resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg

@@ -13,9 +13,6 @@ weight = -1
 
 [values]
 brim_width = 8.75
-cool_fan_speed_max = 100
-cool_min_layer_time_fan_speed_max = 6
-cool_min_speed = 4
 gradual_infill_step_height = =5 * layer_height
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'

resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg

@@ -13,9 +13,6 @@ weight = 0
 
 [values]
 brim_width = 8.75
-cool_fan_speed_max = 100
-cool_min_layer_time_fan_speed_max = 6
-cool_min_speed = 4
 gradual_infill_step_height = =5 * layer_height
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'

resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg

@@ -13,8 +13,6 @@ weight = -2
 
 [values]
 brim_width = 5.6
-cool_min_layer_time_fan_speed_max = 20
-cool_min_speed = 10
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
@@ -24,4 +22,3 @@ support_angle = 70
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-

resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg

@@ -13,8 +13,6 @@ weight = -4
 
 [values]
 brim_width = 5.6
-cool_min_layer_time_fan_speed_max = 20
-cool_min_speed = 10
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
@@ -24,4 +22,3 @@ support_angle = 70
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-

resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg

@@ -13,8 +13,6 @@ weight = -3
 
 [values]
 brim_width = 5.6
-cool_min_layer_time_fan_speed_max = 20
-cool_min_speed = 10
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
@@ -24,4 +22,3 @@ support_angle = 70
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-

resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.8
 weight = -2
 
 [values]
-cool_fan_speed_max = =100
-cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6

resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.8
 weight = -4
 
 [values]
-cool_fan_speed_max = =100
-cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6

resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.8
 weight = -3
 
 [values]
-cool_fan_speed_max = =100
-cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6

resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg

@@ -13,8 +13,6 @@ weight = -2
 
 [values]
 brim_width = 25
-cool_min_layer_time_fan_speed_max = 6
-cool_min_speed = 17
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 material_print_temperature = =default_material_print_temperature - 2
 multiple_mesh_overlap = 0.2

resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg

@@ -13,8 +13,6 @@ weight = -4
 
 [values]
 brim_width = 25
-cool_min_layer_time_fan_speed_max = 6
-cool_min_speed = 17
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0.2

resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg

@@ -13,8 +13,6 @@ weight = -3
 
 [values]
 brim_width = 25
-cool_min_layer_time_fan_speed_max = 6
-cool_min_speed = 17
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True

resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.8
 weight = -2
 
 [values]
-cool_fan_speed_max = =100
-cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75

resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.8
 weight = -4
 
 [values]
-cool_fan_speed_max = =100
-cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75

resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg

@@ -12,8 +12,6 @@ variant = AA 0.8
 weight = -3
 
 [values]
-cool_fan_speed_max = =100
-cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75

resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg

@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 brim_width = 8.75
-cool_min_layer_time_fan_speed_max = 6
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5

resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg

@@ -13,7 +13,6 @@ weight = -4
 
 [values]
 brim_width = 8.75
-cool_min_layer_time_fan_speed_max = 6
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.5

resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg

@@ -13,7 +13,6 @@ weight = -3
 
 [values]
 brim_width = 8.75
-cool_min_layer_time_fan_speed_max = 6
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.5

resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.4
 weight = -2
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.4
 weight = -1
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.4
 weight = -2
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.4
 weight = -1
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.4
 weight = -2
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.4
 weight = -1
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.4
 weight = -2
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.4
 weight = -1
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg

@@ -13,8 +13,6 @@ variant = CC 0.4
 weight = -2
 
 [values]
-cool_fan_speed_max = =100
-cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75

resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg

@@ -13,8 +13,6 @@ variant = CC 0.4
 weight = -1
 
 [values]
-cool_fan_speed_max = =100
-cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75

resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.6
 weight = -2
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.6
 weight = -2
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.6
 weight = -2
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg

@@ -12,13 +12,8 @@ variant = CC 0.6
 weight = -2
 
 [values]
-cool_fan_enabled = True
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 15
-cool_min_speed = 6
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-

resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg

@@ -13,8 +13,6 @@ variant = CC 0.6
 weight = -2
 
 [values]
-cool_fan_speed_max = =100
-cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75

resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg

@@ -13,8 +13,6 @@ variant = CC 0.6
 weight = -1
 
 [values]
-cool_fan_speed_max = =100
-cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75

resources/variants/ultimaker3_aa0.8.inst.cfg

@@ -11,8 +11,6 @@ type = variant
 [values]
 brim_width = 7
 cool_fan_speed = 7
-cool_fan_speed_max = 100
-cool_min_speed = 5
 default_material_print_temperature = 200
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'

resources/variants/ultimaker3_bb0.8.inst.cfg

@@ -16,7 +16,6 @@ acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 /
 acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
 brim_width = 3
 cool_fan_speed = 50
-cool_min_speed = 5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0

resources/variants/ultimaker3_bb04.inst.cfg

@@ -13,7 +13,6 @@ acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500)
 acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
 acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
 acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
-cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = BB 0.4
 machine_nozzle_tip_outer_diameter = 1.0

resources/variants/ultimaker3_extended_aa0.8.inst.cfg

@@ -11,8 +11,6 @@ type = variant
 [values]
 brim_width = 7
 cool_fan_speed = 7
-cool_fan_speed_max = 100
-cool_min_speed = 5
 default_material_print_temperature = 200
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'

resources/variants/ultimaker3_extended_bb04.inst.cfg

@@ -13,7 +13,6 @@ acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500)
 acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
 acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
 acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
-cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = BB 0.4
 machine_nozzle_tip_outer_diameter = 1.0

resources/variants/ultimaker_s3_aa0.8.inst.cfg

@@ -11,8 +11,6 @@ type = variant
 [values]
 brim_width = 7
 cool_fan_speed = 7
-cool_fan_speed_max = 100
-cool_min_speed = 5
 default_material_print_temperature = 200
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'

resources/variants/ultimaker_s3_bb0.8.inst.cfg

@@ -15,7 +15,6 @@ acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 /
 acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
 brim_width = 3
 cool_fan_speed = 50
-cool_min_speed = 5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0

resources/variants/ultimaker_s3_bb04.inst.cfg

@@ -13,7 +13,6 @@ acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500)
 acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
 acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
 acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
-cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = BB 0.4
 machine_nozzle_tip_outer_diameter = 1.0