From 7aaedff8afe7c99713cf0b7764f6378c3dfaa8b1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Torbj=C3=B8rn?= Date: Sat, 30 Dec 2017 00:17:36 +0100 Subject: [PATCH] Reverted back to use of RepRap (Marlin/Sprinter) --- resources/definitions/anycubic_i3_mega.def.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/resources/definitions/anycubic_i3_mega.def.json b/resources/definitions/anycubic_i3_mega.def.json index 3c0925a2d5..01abeb2079 100644 --- a/resources/definitions/anycubic_i3_mega.def.json +++ b/resources/definitions/anycubic_i3_mega.def.json @@ -43,7 +43,7 @@ "default_value":0 }, "machine_gcode_flavor":{ - "default_value":"Marlin" + "default_value":"RepRap (Marlin/Sprinter)" }, "machine_start_gcode":{ "default_value":"G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F{travel_speed} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{travel_speed}\nM117 Printing...\nG5" @@ -52,4 +52,4 @@ "default_value":"M104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors\nM107\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle\nto release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 ;Y0 ;move X/Y to min endstops\nso the head is out of the way\nG1 Y180 F2000\nM84 ;steppers off\nG90\nM300 P300 S4000" } } -} \ No newline at end of file +}