diff --git a/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..e647f5df02
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 3
+name = Fine
+definition = ultimaker3
+
+[metadata]
+setting_version = 4
+type = quality
+quality_type = normal
+weight = 0
+material = generic_tough_pla
+variant = AA 0.25
+
+[values]
+brim_width = 8
+cool_fan_full_at_height = =layer_height_0
+cool_min_speed = 7
+infill_line_width = =line_width
+infill_overlap = 10
+infill_pattern = grid
+line_width = =machine_nozzle_size * 0.92
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = =default_material_print_temperature - 15
+skin_overlap = 5
+speed_layer_0 = =math.ceil(speed_print * 30 / 30)
+speed_print = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 30)
+speed_travel_layer_0 = 120
+speed_wall = =math.ceil(speed_print * 25 / 30)
+speed_wall_0 = =math.ceil(speed_print * 20 / 30)
+top_bottom_thickness = 0.72
+wall_0_inset = 0.015
+wall_0_wipe_dist = 0.25
+wall_line_width = =line_width
+wall_line_width_x= =line_width
+wall_thickness = 0.7
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..f9c9b6c3d8
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 3
+name = Fast
+definition = ultimaker3
+
+[metadata]
+setting_version = 4
+type = quality
+quality_type = draft
+weight = -2
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.45/0.35,2)
+jerk_print = 25
+jerk_roofing = 1
+layer_height_0 = 0.2
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature -10
+material_standby_temperature = 100
+prime_tower_enable = False
+roofing_layer_count = 2
+skin_outline_count = 0
+skin_overlap = 20
+speed_layer_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall * 20 / 24)
+speed_topbottom = =math.ceil(speed_print * 25 / 50)
+speed_wall = =math.ceil(speed_print * 36 / 50)
+speed_wall_0 = =math.ceil(speed_print * 26 / 50)
+top_bottom_thickness = 1.2
+wall_line_width_x = =round(line_width * 0.35/0.35,2)
+wall_thickness = 1.2
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg
new file mode 100644
index 0000000000..789d9b93fd
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg
@@ -0,0 +1,32 @@
+[general]
+version = 3
+name = Normal
+definition = ultimaker3
+
+[metadata]
+setting_version = 4
+type = quality
+quality_type = fast
+weight = -1
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+infill_line_width = =round(line_width * 1.285, 2)
+layer_height_0 = 0.2
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature -10
+material_standby_temperature = 100
+prime_tower_enable = False
+speed_layer_0 = 20
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+top_bottom_thickness = 1.2
+wall_line_width_x = =round(line_width * 0.35/0.35,2)
+wall_thickness = 1.23
+
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..cd755b3ac0
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 3
+name = Fine
+definition = ultimaker3
+
+[metadata]
+setting_version = 4
+type = quality
+quality_type = normal
+weight = 0
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 1.285, 2)
+layer_height_0 = 0.2
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature - 15
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+speed_layer_0 = 20
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+top_bottom_thickness = 1.2
+wall_thickness = 1.23
+
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..ef1a838586
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg
@@ -0,0 +1,37 @@
+[general]
+version = 3
+name = Fast
+definition = ultimaker3
+
+[metadata]
+setting_version = 4
+type = quality
+quality_type = draft
+weight = -2
+material = generic_tough_pla
+variant = AA 0.8
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =100
+cool_min_speed = 2
+gradual_infill_step_height = =3 * layer_height
+infill_line_width = =round(line_width * 0.75 / 0.75, 2)
+infill_pattern = cubic
+layer_height_0 = 0.4
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = =default_material_print_temperature + 0
+prime_tower_enable = False
+retract_at_layer_change = False
+speed_print = 45
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_xy_distance = =wall_line_width_0 * 1.5
+top_bottom_thickness = =layer_height * 6
+wall_line_width = =round(line_width * 0.75 / 0.75, 2)
+wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2)
+wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg
new file mode 100644
index 0000000000..fc3790436e
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+version = 3
+name = Sprint
+definition = ultimaker3
+
+[metadata]
+setting_version = 4
+type = quality
+quality_type = superdraft
+weight = -4
+material = generic_tough_pla
+variant = AA 0.8
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =100
+cool_min_speed = 2
+gradual_infill_step_height = =3 * layer_height
+infill_line_width = =round(line_width * 0.75 / 0.75, 2)
+infill_pattern = cubic
+layer_height_0 = 0.4
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = =default_material_print_temperature + 5
+prime_tower_enable = False
+raft_margin = 10
+retract_at_layer_change = False
+speed_infill = =math.ceil(speed_print * 30 / 30)
+speed_print = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 30)
+speed_wall = =math.ceil(speed_print * 25/ 30)
+speed_wall_0 = =math.ceil(speed_print * 20 / 30)
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_xy_distance = =wall_line_width_0 * 1.5
+top_bottom_thickness = =layer_height * 4
+wall_line_width = =round(line_width * 0.75 / 0.75, 2)
+wall_thickness = =wall_line_width_0 + wall_line_width_x
\ No newline at end of file
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg
new file mode 100644
index 0000000000..9527b3f8f0
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg
@@ -0,0 +1,44 @@
+[general]
+version = 3
+name = Extra Fast
+definition = ultimaker3
+
+[metadata]
+setting_version = 4
+type = quality
+quality_type = verydraft
+weight = -3
+material = generic_tough_pla
+variant = AA 0.8
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =100
+cool_min_speed = 2
+gradual_infill_step_height = =3 * layer_height
+infill_line_width = =round(line_width * 0.75 / 0.75, 2)
+infill_pattern = cubic
+layer_height_0 = 0.4
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
+prime_tower_enable = False
+retract_at_layer_change = False
+speed_infill = =math.ceil(speed_print * 30 / 35)
+speed_topbottom = =math.ceil(speed_print * 20 / 35)
+speed_wall = =math.ceil(speed_print * 25/ 35)
+speed_wall_0 = =math.ceil(speed_print * 20 / 35)
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_pattern = ='triangles'
+support_xy_distance = =wall_line_width_0 * 1.5
+top_bottom_thickness = =layer_height * 4
+wall_line_width = =round(line_width * 0.75 / 0.75, 2)
+wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2)
+wall_thickness = =wall_line_width_0 + wall_line_width_x
+