diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm_visual.inst.cfg
new file mode 100644
index 0000000000..6cb091dafb
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm_visual.inst.cfg
@@ -0,0 +1,25 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_petg
+quality_type = high
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_visual.inst.cfg
new file mode 100644
index 0000000000..a5e918bf82
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_visual.inst.cfg
@@ -0,0 +1,25 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_petg
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_visual.inst.cfg
new file mode 100644
index 0000000000..0cb3fae8f0
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_visual.inst.cfg
@@ -0,0 +1,25 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_petg
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm_visual.inst.cfg
new file mode 100644
index 0000000000..de4a5cf6d2
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm_visual.inst.cfg
@@ -0,0 +1,25 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_petg
+quality_type = high
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_visual.inst.cfg
new file mode 100644
index 0000000000..142c9960d1
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_visual.inst.cfg
@@ -0,0 +1,25 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_petg
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_visual.inst.cfg
new file mode 100644
index 0000000000..f918839805
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_visual.inst.cfg
@@ -0,0 +1,25 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_petg
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg
index 72cb67e359..a5be72d205 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg
@@ -24,9 +24,11 @@ acceleration_topbottom = =acceleration_wall
 acceleration_wall = =acceleration_infill
 acceleration_wall_0 = 1500
 acceleration_wall_x = =acceleration_wall
+bridge_skin_material_flow = 100
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
-bridge_wall_speed = 30
+bridge_wall_material_flow = 100
+bridge_wall_speed = 20
 cool_min_layer_time = 4
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
@@ -47,7 +49,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = True
 retraction_amount = 3.5
-retraction_prime_speed = 22
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg
index 2dac5f2514..f5f81875e2 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg
@@ -24,9 +24,11 @@ acceleration_topbottom = =acceleration_wall
 acceleration_wall = =acceleration_infill
 acceleration_wall_0 = 1500
 acceleration_wall_x = =acceleration_wall
+bridge_skin_material_flow = 100
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
-bridge_wall_speed = 30
+bridge_wall_material_flow = 100
+bridge_wall_speed = 20
 cool_min_layer_time = 4
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
@@ -46,7 +48,7 @@ material_print_temperature = =default_material_print_temperature - 5
 optimize_wall_printing_order = False
 prime_tower_enable = True
 retraction_amount = 3.5
-retraction_prime_speed = 22
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg
index f6c1e041b5..ef7295f72a 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg
@@ -24,9 +24,11 @@ acceleration_topbottom = =acceleration_wall
 acceleration_wall = =acceleration_infill
 acceleration_wall_0 = 1500
 acceleration_wall_x = =acceleration_wall
+bridge_skin_material_flow = 100
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
-bridge_wall_speed = 30
+bridge_wall_material_flow = 100
+bridge_wall_speed = 20
 cool_min_layer_time = 4
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
@@ -46,7 +48,7 @@ material_print_temperature = =default_material_print_temperature - 5
 optimize_wall_printing_order = False
 prime_tower_enable = True
 retraction_amount = 3.5
-retraction_prime_speed = 22
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg
index 0c56873d1e..c5abade6d4 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg
@@ -24,9 +24,11 @@ acceleration_topbottom = =acceleration_wall
 acceleration_wall = =acceleration_infill
 acceleration_wall_0 = 1500
 acceleration_wall_x = =acceleration_wall
+bridge_skin_material_flow = 100
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
-bridge_wall_speed = 30
+bridge_wall_material_flow = 100
+bridge_wall_speed = 20
 cool_min_layer_time = 4
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
@@ -47,7 +49,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = True
 retraction_amount = 3.5
-retraction_prime_speed = 22
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg
index 78fabc448d..c0edcfaf93 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg
@@ -24,9 +24,11 @@ acceleration_topbottom = =acceleration_wall
 acceleration_wall = =acceleration_infill
 acceleration_wall_0 = 1500
 acceleration_wall_x = =acceleration_wall
+bridge_skin_material_flow = 100
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
-bridge_wall_speed = 30
+bridge_wall_material_flow = 100
+bridge_wall_speed = 20
 cool_min_layer_time = 4
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
@@ -46,7 +48,7 @@ material_print_temperature = =default_material_print_temperature - 5
 optimize_wall_printing_order = False
 prime_tower_enable = True
 retraction_amount = 3.5
-retraction_prime_speed = 22
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg
index ccc1da9d31..39378d2159 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg
@@ -24,9 +24,11 @@ acceleration_topbottom = =acceleration_wall
 acceleration_wall = =acceleration_infill
 acceleration_wall_0 = 1500
 acceleration_wall_x = =acceleration_wall
+bridge_skin_material_flow = 100
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
-bridge_wall_speed = 30
+bridge_wall_material_flow = 100
+bridge_wall_speed = 20
 cool_min_layer_time = 4
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
@@ -46,7 +48,7 @@ material_print_temperature = =default_material_print_temperature - 5
 optimize_wall_printing_order = False
 prime_tower_enable = True
 retraction_amount = 3.5
-retraction_prime_speed = 22
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False