Update Changelog for stable

Update changelog for stable release

resources/texts/change_log.txt

@@ -21,11 +21,13 @@
 * New settings:
 - Overhanging Wall Speeds, now gives you the ability to tune multiple values. Don’t forget to adjust the Overhanging Wall Angle to start using the setting. 
 - Minimum Layer Time with Overhang and Minimum Overhang Segment Length: Fine-tune the minimum layer time for overhangs.
+Try it for yourself <a href="https://www.thingiverse.com/thing:6975650?utm_source=changelog&utm_medium=cura&utm_campaign=510">with this Overhanging Wall Angle Test</a>.
 - Inside Travel Avoid Distance: Finetune combing movements.
 - Pressure Advance Factor Setting: New setting for machine definitions.
 - You can now tune the Bottom Surface Skin, like you can tune the Top Surface Skin! You can now tune Extruder, Layers, Line Width, Pattern, Line Directions, Outer Wall Flow, Inner Wall(s) Flow, Flow, Outer Wall Speed, Inner Wall Speed, Skin Speed, Inner Wall Acceleration, Skin Acceleration, Outer Wall Jerk, Inner Wall Jerk, Skin Jerk, and Monotonic Bottom Surface Order
 - Enable/Disable USB Printing: A hidden preference setting to indicate that you are using the printer over USB functionality. This setting lays the groundwork for automatically disabling USB printing in the next release when it’s not being used.
 
+
 * Bug fixes:
 - Resolved a crash that occurred when switching materials on Sovol printers.
 - Random Seam no longer favors one side and not is truly random again
@@ -37,14 +39,27 @@
 - The number of decimal places displayed for layer height in the top bar has been reduced.
 - Fixed a bug that caused incorrect retracting and hopping on printers with more than 2 extruders.
 - Improved how fast the settings are loaded in the Settings Visibility window when scrolling
-- Improved how disallowed areas and other models are taken into account when arranging models on the buildplate
+- Improved how disallowed areas and other models are taken into account when arranging models on the buildplate, including other models
 - Preview playback now only shows visible parts. Infill lines, shell, and helpers are always hidden if disabled in preview's color scheme
 
+
+* Bugs resolved since the Beta release
+- Fixed a bug where the inner wall was bridging incorrectly
+- Fixed a bug where support meshes were not printing if they had nothing to support
+- Fixed a bug where project names would get mixed up when switching between projects
+- Improved the UltiMaker S8 profiles for improved reliability and quality
+- Updated Nylon CF Slide settings to reduce under extrusion
+- Reduced the chance of a filament jam on Method series printers with dual extrusion prints with small layertimes
+- The Bottom Surface Skin settings introduced in this release are now only enabled if 'Bottom Surface Skin layers' is more than zero
+- Improved the speed when interacting with the Settings Visiblity window
+- Columns in the Profile Description Screen can now be resized so long setting names can be read
+- Two non-critical security fixes were implemented to align with security best practices in OAuth2 and the printer-linter
+- Resolved top reported crashes coming in via the analyzing tool Sentry
+
 * Printer definitions, profiles, and materials:
 - Introduced Visual Intents for the Sketch Sprint
 - Introduced new Extra Fast and Draft profiles for the Sketch Sprint
 - Introduced profiles for Sketch printers for Metallic PLA with improved surface quality (matte vs shiny)
-- Introduce High Speed and High Speed Solid intents for Method, Method X, and Method XL
 - Introduced PC ABS and PC ABS FR materials for Method X and Method XL
 - Introduced Nylon Slide for UltiMaker S Series Printers
 - Updated the Breakaway Build Volume Temperature for UltiMaker Factor 4