diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json
index 232f407f9f..99c3e0197e 100644
--- a/resources/definitions/fdmprinter.def.json
+++ b/resources/definitions/fdmprinter.def.json
@@ -1399,29 +1399,53 @@
                     "limit_to_extruder": "wall_0_extruder_nr",
                     "settable_per_mesh": true
                 },
-                "z_seam_x":
+                "z_seam_position":
                 {
-                    "label": "Z Seam X",
-                    "description": "The X coordinate of the position near where to start printing each part in a layer.",
-                    "unit": "mm",
-                    "type": "float",
-                    "default_value": 100.0,
-                    "value": "machine_width / 2",
+                    "label": "Z Seam Position",
+                    "description": "The position near where to start printing each part in a layer.",
+                    "type": "enum",
+                    "options":
+                    {
+                        "backleft": "Back Left",
+                        "back": "Back",
+                        "backright": "Back Right",
+                        "right": "Right",
+                        "frontright": "Front Right",
+                        "front": "Front",
+                        "frontleft": "Front Left",
+                        "left": "Left"
+                    },
                     "enabled": "z_seam_type == 'back'",
+                    "default_value": "back",
                     "limit_to_extruder": "wall_0_extruder_nr",
-                    "settable_per_mesh": true
-                },
-                "z_seam_y":
-                {
-                    "label": "Z Seam Y",
-                    "description": "The Y coordinate of the position near where to start printing each part in a layer.",
-                    "unit": "mm",
-                    "type": "float",
-                    "default_value": 100.0,
-                    "value": "machine_depth * 3",
-                    "enabled": "z_seam_type == 'back'",
-                    "limit_to_extruder": "wall_0_extruder_nr",
-                    "settable_per_mesh": true
+                    "settable_per_mesh": true,
+                    "children":
+                    {
+                        "z_seam_x":
+                        {
+                            "label": "Z Seam X",
+                            "description": "The X coordinate of the position near where to start printing each part in a layer.",
+                            "unit": "mm",
+                            "type": "float",
+                            "default_value": 100.0,
+                            "value": "0 if (z_seam_position == 'frontleft' or z_seam_position == 'left' or z_seam_position == 'backleft') else machine_width/2 if (z_seam_position == 'front' or z_seam_position == 'back') else machine_width",
+                            "enabled": "z_seam_type == 'back'",
+                            "limit_to_extruder": "wall_0_extruder_nr",
+                            "settable_per_mesh": true
+                        },
+                        "z_seam_y":
+                        {
+                            "label": "Z Seam Y",
+                            "description": "The Y coordinate of the position near where to start printing each part in a layer.",
+                            "unit": "mm",
+                            "type": "float",
+                            "default_value": 100.0,
+                            "value": "0 if (z_seam_position == 'frontleft' or z_seam_position == 'front' or z_seam_position == 'frontright') else machine_depth/2 if (z_seam_position == 'left' or z_seam_position == 'right') else machine_depth",
+                            "enabled": "z_seam_type == 'back'",
+                            "limit_to_extruder": "wall_0_extruder_nr",
+                            "settable_per_mesh": true
+                        }
+                    }
                 },
                 "z_seam_corner":
                 {
diff --git a/scripts/lionbridge_import.py b/scripts/lionbridge_import.py
index 07c5d5b66a..0c2c132216 100644
--- a/scripts/lionbridge_import.py
+++ b/scripts/lionbridge_import.py
@@ -2,6 +2,7 @@
 # Cura is released under the terms of the LGPLv3 or higher.
 
 import argparse #To get the source directory from command line arguments.
+import io # To fix encoding issues in Windows
 import os #To find files from the source.
 import os.path #To find files from the source and the destination path.
 
@@ -34,12 +35,12 @@ def lionbridge_import(source: str) -> None:
             else:
                 raise Exception("Unknown file: " + source_file + "... Is this Cura or Uranium?")
 
-            with open(os.path.join(directory, file_pot)) as f:
+            with io.open(os.path.join(directory, file_pot), encoding = "utf8") as f:
                 source_str = f.read()
-            with open(destination_file) as f:
+            with io.open(destination_file, encoding = "utf8") as f:
                 destination_str = f.read()
             result = merge(source_str, destination_str)
-            with open(destination_file, "w") as f:
+            with io.open(destination_file, "w", encoding = "utf8") as f:
                 f.write(result)
 
 ##  Gets the destination path to copy the translations for Cura to.