diff --git a/resources/i18n/cs_CZ/cura.po b/resources/i18n/cs_CZ/cura.po index ccc8d57643..edfd1a216e 100644 --- a/resources/i18n/cs_CZ/cura.po +++ b/resources/i18n/cs_CZ/cura.po @@ -704,7 +704,7 @@ msgstr "Jiné" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:61 msgctxt "@text:window" msgid "The release notes could not be opened." -msgstr "" +msgstr "Poznámky k vydání nelze otevřít." #: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56 #: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:259 @@ -864,22 +864,22 @@ msgstr "Spravovat zálohy" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161 msgctxt "@message" msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker." -msgstr "" +msgstr "Slicování selhalo na neočekávané chybě. Zvažte, prosím, nahlášení chyby v našem issue trackeru." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162 msgctxt "@message:title" msgid "Slicing failed" -msgstr "" +msgstr "Slicování selhalo" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:166 msgctxt "@message:button" msgid "Report a bug" -msgstr "" +msgstr "Nahlásit chybu" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167 msgctxt "@message:description" msgid "Report a bug on Ultimaker Cura's issue tracker." -msgstr "" +msgstr "Nahlásit chybu v Ultimaker Cura issue trackeru." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:394 msgctxt "@info:status" @@ -958,13 +958,13 @@ msgstr "Nemohu načíst informace o aktualizaci." #, python-brace-format msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}." -msgstr "" +msgstr "K dispozici mohou být nové funkce nebo opravy chyb pro zařízení {machine_name}! Pokud jste tak už neučinili, je doporučeno zaktualizovat firmware vaší tiskárny na verzi {latest_version}." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s stable firmware available" -msgstr "" +msgstr "Nový stabilní firmware je k dispozici pro %s" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28 msgctxt "@action:button" @@ -1241,7 +1241,7 @@ msgstr "Pohled vrstev" #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95 msgctxt "@text" msgid "Unable to read example data file." -msgstr "" +msgstr "Nelze načíst ukázkový datový soubor." #: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:71 msgctxt "@info:status" @@ -1398,12 +1398,12 @@ msgstr "Připojen přes cloud" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261 msgctxt "@action:button" msgid "Monitor print" -msgstr "" +msgstr "Sledovat tisk" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263 msgctxt "@action:tooltip" msgid "Track the print in Ultimaker Digital Factory" -msgstr "" +msgstr "Sledujte tisk v Ultimaker Digital Factory" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279 #, python-brace-format @@ -3106,7 +3106,7 @@ msgstr "Aktualizujte firmware tiskárny a spravujte frontu vzdáleně." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288 msgctxt "@info" msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura." -msgstr "" +msgstr "Vstup z webových kamer pro cloudové tiskárny nemůže být v Ultimaker Cura zobrazen." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348 msgctxt "@label:status" @@ -4629,7 +4629,7 @@ msgstr "Více informací" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:811 msgctxt "@label" msgid "Updates" -msgstr "" +msgstr "Aktualizace" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:818 msgctxt "@info:tooltip" @@ -4644,32 +4644,32 @@ msgstr "Zkontrolovat aktualizace při zapnutí" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:834 msgctxt "@info:tooltip" msgid "When checking for updates, only check for stable releases." -msgstr "" +msgstr "Při kontrole aktualizací kontrolovat pouze stabilní vydání." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:839 msgctxt "@option:radio" msgid "Stable releases only" -msgstr "" +msgstr "Pouze stabilní vydání" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:850 msgctxt "@info:tooltip" msgid "When checking for updates, check for both stable and for beta releases." -msgstr "" +msgstr "Při kontrole aktualizací kontrolovat stabilní i beta vydání." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:855 msgctxt "@option:radio" msgid "Stable and Beta releases" -msgstr "" +msgstr "Stabilní a beta vydání" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:866 msgctxt "@info:tooltip" msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!" -msgstr "" +msgstr "Mají být při každém startu Cury automaticky kontrolovány nové moduly? Důrazně doporučujeme tuto možnost nevypínat!" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:871 msgctxt "@option:check" msgid "Get notifications for plugin updates" -msgstr "" +msgstr "Získávat oznámení o aktualizacích modulů" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 diff --git a/resources/i18n/cs_CZ/fdmprinter.def.json.po b/resources/i18n/cs_CZ/fdmprinter.def.json.po index b79262103f..c49ead79c6 100644 --- a/resources/i18n/cs_CZ/fdmprinter.def.json.po +++ b/resources/i18n/cs_CZ/fdmprinter.def.json.po @@ -686,7 +686,7 @@ msgstr "Kroků za milimetr (E)" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_e description" msgid "How many steps of the stepper motors will result in moving the feeder wheel by one millimeter around its circumference." -msgstr "" +msgstr "Kolik kroků krokového motoru povede k pohybu kolečka feederu o jeden milimetr po jeho obvodu." #: fdmprinter.def.json msgctxt "machine_endstop_positive_direction_x label" @@ -1436,12 +1436,12 @@ msgstr "Propojte horní / dolní povrchové cesty tam, kde běží vedle sebe. P #: fdmprinter.def.json msgctxt "skin_monotonic label" msgid "Monotonic Top/Bottom Order" -msgstr "" +msgstr "Monotónní pořadí horních / dolních povrchů" #: fdmprinter.def.json msgctxt "skin_monotonic description" msgid "Print top/bottom lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent." -msgstr "" +msgstr "Tisknout horní / dolní linky v takovém pořadí, aby se navazující linky překrývaly ve stejném směru. Tisk zabere trochu více času, ale hladké povrchy budou vypadat více jednolité." #: fdmprinter.def.json msgctxt "skin_angles label" @@ -1516,12 +1516,12 @@ msgstr "Zig Zag" #: fdmprinter.def.json msgctxt "ironing_monotonic label" msgid "Monotonic Ironing Order" -msgstr "" +msgstr "Monotónní pořadí žehlení" #: fdmprinter.def.json msgctxt "ironing_monotonic description" msgid "Print ironing lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent." -msgstr "" +msgstr "Tisknout žehlící linky v takovém pořadí, aby se navazující linky překrývaly ve stejném směru. Tisk zabere trochu více času, ale hladké povrchy budou vypadat více jednolité." #: fdmprinter.def.json msgctxt "ironing_line_spacing label" @@ -5324,12 +5324,12 @@ msgstr "Zig Zag" #: fdmprinter.def.json msgctxt "roofing_monotonic label" msgid "Monotonic Top Surface Order" -msgstr "" +msgstr "Monotónní pořadí horního povrchu" #: fdmprinter.def.json msgctxt "roofing_monotonic description" msgid "Print top surface lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent." -msgstr "" +msgstr "Tisknout linky horního povrchu v takovém pořadí, aby se navazující linky překrývaly ve stejném směru. Tisk zabere trochu více času, ale hladké povrchy budou vypadat více jednolité." #: fdmprinter.def.json msgctxt "roofing_angles label" diff --git a/resources/i18n/pt_BR/cura.po b/resources/i18n/pt_BR/cura.po index d37b27de5f..eb21e71f9a 100644 --- a/resources/i18n/pt_BR/cura.po +++ b/resources/i18n/pt_BR/cura.po @@ -1,13 +1,13 @@ # Cura # Copyright (C) 2020 Ultimaker B.V. # This file is distributed under the same license as the Cura package. -# +# msgid "" msgstr "" "Project-Id-Version: Cura 4.11\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2021-08-11 09:59+0200\n" -"PO-Revision-Date: 2021-06-19 06:21+0200\n" +"PO-Revision-Date: 2021-08-18 02:29+0200\n" "Last-Translator: Cláudio Sampaio \n" "Language-Team: Cláudio Sampaio \n" "Language: pt_BR\n" @@ -22,27 +22,22 @@ msgctxt "@info:title" msgid "Login failed" msgstr "Login falhou" -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24 +#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24 msgctxt "@info:status" msgid "Finding new location for objects" msgstr "Achando novos lugares para objetos" -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28 +#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28 msgctxt "@info:title" msgid "Finding Location" msgstr "Buscando Localização" -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 -#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76 +#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76 msgctxt "@info:status" msgid "Unable to find a location within the build volume for all objects" msgstr "Não foi possível achar um lugar dentro do volume de construção para todos os objetos" -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152 -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42 +#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42 msgctxt "@info:title" msgid "Can't Find Location" msgstr "Não Foi Encontrada Localização" @@ -52,10 +47,7 @@ msgctxt "@info:backup_failed" msgid "Could not create archive from user data directory: {}" msgstr "Não pude criar arquivo do diretório de dados de usuário: {}" -#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:122 -#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:159 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126 +#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:122 /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:159 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126 msgctxt "@info:title" msgid "Backup" msgstr "Backup" @@ -276,9 +268,7 @@ msgctxt "@info:status" msgid "Only one G-code file can be loaded at a time. Skipped importing {0}" msgstr "Somente um arquivo G-Code pode ser carregado por vez. Pulando importação de {0}" -#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1803 -#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:191 -#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:249 +#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1803 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:191 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:249 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177 msgctxt "@info:title" msgid "Warning" @@ -290,21 +280,14 @@ msgctxt "@info:status" msgid "Can't open any other file if G-code is loading. Skipped importing {0}" msgstr "Não é possível abrir nenhum outro arquivo se G-Code estiver sendo carregado. Pulando importação de {0}" -#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1815 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:148 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:158 -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141 -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161 +#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1815 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:148 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:158 +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161 msgctxt "@info:title" msgid "Error" msgstr "Erro" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1613 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1613 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171 msgctxt "@label" msgid "Unknown" msgstr "Desconhecido" @@ -330,45 +313,37 @@ msgctxt "@label {0} is the name of a printer that's about to be deleted." msgid "Are you sure you wish to remove {0}? This cannot be undone!" msgstr "Tem certeza que deseja remover {0}? Isto não pode ser defeito!" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338 msgctxt "@label" msgid "Default" msgstr "Default" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14 msgctxt "@label" msgid "Visual" msgstr "Visual" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15 msgctxt "@text" msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality." msgstr "O perfil visual é projetado para imprimir protótipos e modelos virtuais com o objetivo de alta qualidade visual e de superfície." -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18 msgctxt "@label" msgid "Engineering" msgstr "Engenharia" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19 msgctxt "@text" msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances." msgstr "O perfil de engenharia é projetado para imprimir protótipos funcionais e partes de uso final com o objetivo de melhor precisão e tolerâncias mais estritas." -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22 msgctxt "@label" msgid "Draft" msgstr "Rascunho" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23 msgctxt "@text" msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction." msgstr "O perfil de rascunho é projetado para imprimir protótipos iniciais e validações de conceito com o objetivo de redução significativa de tempo de impressão." @@ -378,8 +353,7 @@ msgctxt "@label" msgid "Custom Material" msgstr "Material Personalizado" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:225 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:230 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:225 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:230 msgctxt "@label" msgid "Custom" msgstr "Personalizado" @@ -445,21 +419,18 @@ msgctxt "@info" msgid "Unable to reach the Ultimaker account server." msgstr "Não foi possível contactar o servidor de contas da Ultimaker." -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132 msgctxt "@title:window" msgid "File Already Exists" msgstr "O Arquivo Já Existe" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133 #, python-brace-format msgctxt "@label Don't translate the XML tag !" msgid "The file {0} already exists. Are you sure you want to overwrite it?" msgstr "O arquivo {0} já existe. Tem certeza que quer sobrescrevê-lo?" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:457 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:460 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:457 /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:460 msgctxt "@info:status" msgid "Invalid file URL:" msgstr "URL de arquivo inválida:" @@ -511,8 +482,7 @@ msgctxt "@info:status Don't translate the XML tags !" msgid "Failed to import profile from {0}:" msgstr "Erro ao importar perfil de {0}:" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:244 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:254 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:244 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:254 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "This profile {0} contains incorrect data, could not import it." @@ -584,8 +554,7 @@ msgctxt "@info:No intent profile selected" msgid "Default" msgstr "Default" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:713 -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:713 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216 msgctxt "@label" msgid "Nozzle" msgstr "Bico" @@ -605,30 +574,20 @@ msgctxt "@info:title" msgid "Extruder(s) Disabled" msgstr "Extrusor(es) Desabilitado(s)" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48 msgctxt "@action:button" msgid "Add" msgstr "Adicionar" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:272 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:272 msgctxt "@action:button" msgid "Finish" msgstr "Finalizar" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:445 -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234 -#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:445 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293 msgctxt "@action:button" msgid "Cancel" msgstr "Cancelar" @@ -699,30 +658,23 @@ msgctxt "@tooltip" msgid "Other" msgstr "Outros" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:37 -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:61 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:37 /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:61 msgctxt "@text:window" msgid "The release notes could not be opened." -msgstr "" +msgstr "As notas de lançamento não puderam ser abertas." -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56 -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:259 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56 /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:259 msgctxt "@action:button" msgid "Next" msgstr "Próximo" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:268 -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:55 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:268 /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:55 msgctxt "@action:button" msgid "Skip" msgstr "Pular" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:60 -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 -#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:174 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:60 /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 +#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:174 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127 msgctxt "@action:button" msgid "Close" msgstr "Fechar" @@ -744,8 +696,7 @@ msgctxt "@info:error Don't translate the XML tags or !" msgid "Project file {0} is suddenly inaccessible: {1}." msgstr "O arquivo de projeto {0} tornou-se subitamente inacessível: {1}." -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641 -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:649 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:649 msgctxt "@info:title" msgid "Can't Open Project File" msgstr "Não Foi Possível Abrir o Arquivo de Projeto" @@ -772,8 +723,7 @@ msgctxt "@title:tab" msgid "Custom" msgstr "Personalizado" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33 msgctxt "@item:inlistbox" msgid "3MF File" msgstr "Arquivo 3MF" @@ -783,8 +733,7 @@ msgctxt "@error:zip" msgid "3MF Writer plug-in is corrupt." msgstr "O complemento de Escrita 3MF está corrompido." -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92 msgctxt "@error:zip" msgid "No permission to write the workspace here." msgstr "Sem permissão para gravar o espaço de trabalho aqui." @@ -849,8 +798,7 @@ msgctxt "@error:file_size" msgid "The backup exceeds the maximum file size." msgstr "O backup excede o tamanho máximo de arquivo." -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:86 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:86 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26 msgctxt "@info:backup_status" msgid "There was an error trying to restore your backup." msgstr "Houve um erro ao tentar restaurar seu backup." @@ -863,34 +811,30 @@ msgstr "Gerenciar backups" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161 msgctxt "@message" msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker." -msgstr "" +msgstr "O fatiamento falhou com um erro não esperado. Por favor considere relatar um bug em nosso issue tracker." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162 msgctxt "@message:title" msgid "Slicing failed" -msgstr "" +msgstr "Fatiamento falhado" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:166 msgctxt "@message:button" msgid "Report a bug" -msgstr "" +msgstr "Relatar um bug" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167 msgctxt "@message:description" msgid "Report a bug on Ultimaker Cura's issue tracker." -msgstr "" +msgstr "Relatar um bug no issue tracker do Ultimaker Cura." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:394 msgctxt "@info:status" msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." msgstr "Não foi possível fatiar com o material atual visto que é incompatível com a máquina ou configuração selecionada." -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:465 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:476 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:465 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:476 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489 msgctxt "@info:title" msgid "Unable to slice" msgstr "Não foi possível fatiar" @@ -931,8 +875,7 @@ msgstr "" "- Estão associados a um extrusor habilitado\n" "- Não estão todos configurados como malhas de modificação" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 msgctxt "@info:status" msgid "Processing Layers" msgstr "Processando Camadas" @@ -942,8 +885,7 @@ msgctxt "@info:title" msgid "Information" msgstr "Informação" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14 msgctxt "@item:inlistbox" msgid "Cura Profile" msgstr "Perfil do Cura" @@ -957,13 +899,13 @@ msgstr "Não foi possível acessar informação de atualização." #, python-brace-format msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}." -msgstr "" +msgstr "Novos recursos ou consertos de bugs podem estar disponíveis para sua {machine_name}! Se você não o fez ainda, recomenda-se que atualize o firmware de sua impressora para a versão {latest_version}." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s stable firmware available" -msgstr "" +msgstr "Novo firmware estável de %s disponível" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28 msgctxt "@action:button" @@ -975,8 +917,7 @@ msgctxt "@action" msgid "Update Firmware" msgstr "Atualizar Firmware" -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17 +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17 msgctxt "@item:inlistbox" msgid "Compressed G-code File" msgstr "Arquivo de G-Code Comprimido" @@ -986,9 +927,7 @@ msgctxt "@error:not supported" msgid "GCodeGzWriter does not support text mode." msgstr "O GCodeGzWriter não suporta modo binário." -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16 +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16 msgctxt "@item:inlistbox" msgid "G-code File" msgstr "Arquivo G-Code" @@ -998,8 +937,7 @@ msgctxt "@info:status" msgid "Parsing G-code" msgstr "Interpretando G-Code" -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349 -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503 +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503 msgctxt "@info:title" msgid "G-code Details" msgstr "Detalhes do G-Code" @@ -1019,8 +957,7 @@ msgctxt "@error:not supported" msgid "GCodeWriter does not support non-text mode." msgstr "O GCodeWriter não suporta modo binário." -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96 +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96 msgctxt "@warning:status" msgid "Please prepare G-code before exporting." msgstr "Por favor prepare o G-Code antes de exportar." @@ -1125,8 +1062,7 @@ msgctxt "@item:inlistbox" msgid "Save to Removable Drive {0}" msgstr "Salvar em Unidade Removível {0}" -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118 +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118 msgctxt "@info:status" msgid "There are no file formats available to write with!" msgstr "Não há formatos de arquivo disponíveis com os quais escrever!" @@ -1142,8 +1078,7 @@ msgctxt "@info:title" msgid "Saving" msgstr "Salvando" -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108 -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111 +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not save to {0}: {1}" @@ -1155,8 +1090,7 @@ msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." msgstr "Não foi possível encontrar nome de arquivo ao tentar escrever em {device}." -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159 +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159 #, python-brace-format msgctxt "@info:status" msgid "Could not save to removable drive {0}: {1}" @@ -1226,8 +1160,7 @@ msgctxt "@info:title" msgid "No layers to show" msgstr "Não há camadas a exibir" -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:136 -#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:74 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:136 /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:74 msgctxt "@info:option_text" msgid "Do not show this message again" msgstr "Não mostrar essa mensagem novamente" @@ -1240,7 +1173,7 @@ msgstr "Visão de Camadas" #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95 msgctxt "@text" msgid "Unable to read example data file." -msgstr "" +msgstr "Não foi possível ler o arquivo de dados de exemplo." #: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:71 msgctxt "@info:status" @@ -1277,8 +1210,7 @@ msgctxt "@info:generic" msgid "Do you want to sync material and software packages with your account?" msgstr "Você quer sincronizar os pacotes de material e software com sua conta?" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93 msgctxt "@info:title" msgid "Changes detected from your Ultimaker account" msgstr "Alterações detectadas de sua conta Ultimaker" @@ -1298,8 +1230,7 @@ msgctxt "@button" msgid "Decline" msgstr "Recusar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56 msgctxt "@button" msgid "Agree" msgstr "Concordar" @@ -1354,16 +1285,12 @@ msgctxt "@item:inlistbox" msgid "Compressed COLLADA Digital Asset Exchange" msgstr "Câmbio de Ativos Digitais COLLADA Comprimido" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28 msgctxt "@item:inlistbox" msgid "Ultimaker Format Package" msgstr "Pacote de Formato da Ultimaker" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:57 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:72 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:94 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:149 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:57 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:72 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:94 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:149 #: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:159 msgctxt "@info:error" msgid "Can't write to UFP file:" @@ -1397,12 +1324,12 @@ msgstr "Conectado pela nuvem" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261 msgctxt "@action:button" msgid "Monitor print" -msgstr "" +msgstr "Monitorar impressão" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263 msgctxt "@action:tooltip" msgid "Track the print in Ultimaker Digital Factory" -msgstr "" +msgstr "Rastrear a impressão na Ultimaker Digital Factory" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279 #, python-brace-format @@ -1450,8 +1377,7 @@ msgid_plural "These printers are not linked to the Digital Factory:" msgstr[0] "Esta impressora não está ligada à Digital Factory:" msgstr[1] "Estas impressoras não estão ligadas à Digital Factory:" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:331 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:331 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421 msgctxt "info:name" msgid "Ultimaker Digital Factory" msgstr "Ultimaker Digital Factory" @@ -1712,14 +1638,12 @@ msgctxt "@action:ComboBox Save settings in a new profile" msgid "Create new" msgstr "Criar novos" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:75 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:75 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70 msgctxt "@action:title" msgid "Summary - Cura Project" msgstr "Resumo - Projeto do Cura" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:97 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:97 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94 msgctxt "@action:label" msgid "Printer settings" msgstr "Ajustes da impressora" @@ -1729,20 +1653,17 @@ msgctxt "@info:tooltip" msgid "How should the conflict in the machine be resolved?" msgstr "Como o conflito na máquina deve ser resolvido?" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:167 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:167 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103 msgctxt "@action:label" msgid "Type" msgstr "Tipo" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:183 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:183 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118 msgctxt "@action:label" msgid "Printer Group" msgstr "Grupo de Impressora" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:205 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:205 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219 msgctxt "@action:label" msgid "Profile settings" msgstr "Ajustes de perfil" @@ -1752,28 +1673,23 @@ msgctxt "@info:tooltip" msgid "How should the conflict in the profile be resolved?" msgstr "Como o conflito no perfil deve ser resolvido?" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:242 -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:353 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:242 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:353 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243 msgctxt "@action:label" msgid "Name" msgstr "Nome" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:258 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:258 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260 msgctxt "@action:label" msgid "Intent" msgstr "Objetivo" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:274 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:274 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227 msgctxt "@action:label" msgid "Not in profile" msgstr "Ausente no perfil" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:279 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:279 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232 msgctxt "@action:label" msgid "%1 override" msgid_plural "%1 overrides" @@ -1927,9 +1843,7 @@ msgctxt "@description" msgid "Backup and synchronize your Cura settings." msgstr "Fazer backup e sincronizar os ajustes do Cura." -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:53 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:53 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:199 msgctxt "@button" msgid "Sign in" @@ -2080,8 +1994,7 @@ msgctxt "@item:inlistbox" msgid "Linear" msgstr "Linear" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172 msgctxt "@item:inlistbox" msgid "Translucency" msgstr "Translucidez" @@ -2106,9 +2019,7 @@ msgctxt "@action:label" msgid "Smoothing" msgstr "Suavização" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227 -#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361 msgctxt "@action:button" msgid "OK" msgstr "Ok" @@ -2128,18 +2039,10 @@ msgctxt "@label" msgid "Nozzle size" msgstr "Tamanho do bico" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 msgctxt "@label" msgid "mm" msgstr "mm" @@ -2347,8 +2250,7 @@ msgctxt "@title:window" msgid "Select Settings to Customize for this model" msgstr "Selecionar Ajustes a Personalizar para este modelo" -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96 +#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96 msgctxt "@label:textbox" msgid "Filter..." msgstr "Filtrar..." @@ -2390,8 +2292,7 @@ msgid_plural "The following scripts are active:" msgstr[0] "O seguinte script está ativo:" msgstr[1] "Os seguintes scripts estão ativos:" -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49 msgctxt "@label" msgid "Color scheme" msgstr "Esquema de Cores" @@ -2446,8 +2347,7 @@ msgctxt "@label" msgid "Shell" msgstr "Perímetro" -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65 msgctxt "@label" msgid "Infill" msgstr "Preenchimento" @@ -2557,8 +2457,7 @@ msgctxt "@action:label" msgid "Website" msgstr "Sítio Web" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20 msgctxt "@action:button" msgid "Installed" msgstr "Instalado" @@ -2573,20 +2472,17 @@ msgctxt "@label:The string between and is the highlighted link" msgid "Buy material spools" msgstr "Comprar rolos de material" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34 msgctxt "@action:button" msgid "Update" msgstr "Atualizar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35 msgctxt "@action:button" msgid "Updating" msgstr "Atualizando" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36 msgctxt "@action:button" msgid "Updated" msgstr "Atualizado" @@ -2596,8 +2492,7 @@ msgctxt "@label" msgid "Premium" msgstr "Premium" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86 msgctxt "@info:tooltip" msgid "Go to Web Marketplace" msgstr "Ir ao Mercado Web" @@ -2622,9 +2517,7 @@ msgctxt "@title:tab" msgid "Plugins" msgstr "Complementos" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:475 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:475 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89 msgctxt "@title:tab" msgid "Materials" msgstr "Materiais" @@ -2669,9 +2562,7 @@ msgctxt "@button" msgid "Dismiss" msgstr "Dispensar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:178 msgctxt "@button" msgid "Next" @@ -2737,8 +2628,7 @@ msgctxt "@label" msgid "Last updated" msgstr "Última atualização" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138 msgctxt "@label" msgid "Brand" msgstr "Marca" @@ -2868,9 +2758,7 @@ msgctxt "@action:button" msgid "Edit" msgstr "Editar" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138 msgctxt "@action:button" msgid "Remove" @@ -2886,20 +2774,17 @@ msgctxt "@label" msgid "If your printer is not listed, read the network printing troubleshooting guide" msgstr "Se sua impressora não está listada, leia o guia de resolução de problemas de impressão em rede" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263 msgctxt "@label" msgid "Type" msgstr "Tipo" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279 msgctxt "@label" msgid "Firmware version" msgstr "Versão do firmware" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295 msgctxt "@label" msgid "Address" msgstr "Endereço" @@ -2929,8 +2814,7 @@ msgctxt "@title:window" msgid "Invalid IP address" msgstr "Endereço IP inválido" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146 msgctxt "@text" msgid "Please enter a valid IP address." msgstr "Por favor entre um endereço IP válido." @@ -2940,8 +2824,7 @@ msgctxt "@title:window" msgid "Printer Address" msgstr "Endereço da Impressora" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102 msgctxt "@label" msgid "Enter the IP address of your printer on the network." msgstr "Entre o endereço IP da sua impressora na rede." @@ -2993,8 +2876,7 @@ msgctxt "@label" msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print." msgstr "Sobrepor irá usar os ajustes especificados com a configuração existente da impressora. Isto pode causar falha da impressão." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184 msgctxt "@label" msgid "Glass" @@ -3015,8 +2897,7 @@ msgctxt "@label" msgid "Delete" msgstr "Remover" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:290 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:290 msgctxt "@label" msgid "Resume" msgstr "Continuar" @@ -3031,9 +2912,7 @@ msgctxt "@label" msgid "Resuming..." msgstr "Continuando..." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:285 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:294 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:285 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:294 msgctxt "@label" msgid "Pause" msgstr "Pausar" @@ -3073,8 +2952,7 @@ msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to abort %1?" msgstr "Você tem certeza que quer abortar %1?" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:336 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:336 msgctxt "@window:title" msgid "Abort print" msgstr "Abortar impressão" @@ -3084,9 +2962,7 @@ msgctxt "@label link to Connect and Cloud interfaces" msgid "Manage printer" msgstr "Gerir Impressora" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250 msgctxt "@info" msgid "Please update your printer's firmware to manage the queue remotely." msgstr "Por favor atualize o firmware de sua impressora parar gerir a fila remotamente." @@ -3094,7 +2970,7 @@ msgstr "Por favor atualize o firmware de sua impressora parar gerir a fila remot #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288 msgctxt "@info" msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura." -msgstr "" +msgstr "Feeds de webcam para impressoras de nuvem não podem ser vistos pelo Ultimaker Cura." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348 msgctxt "@label:status" @@ -3116,8 +2992,7 @@ msgctxt "@label:status" msgid "Idle" msgstr "Ocioso" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 msgctxt "@label:status" msgid "Preparing..." @@ -3158,14 +3033,12 @@ msgctxt "@label" msgid "First available" msgstr "Primeira disponível" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90 msgctxt "@label:status" msgid "Aborted" msgstr "Abortado" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82 msgctxt "@label:status" msgid "Finished" msgstr "Finalizado" @@ -3250,8 +3123,7 @@ msgctxt "@action:button" msgid "Sign in" msgstr "Entrar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:20 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:64 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:20 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:64 msgctxt "@label" msgid "Sign in to the Ultimaker platform" msgstr "Entre na plataforma Ultimaker" @@ -3602,8 +3474,7 @@ msgctxt "@action:inmenu menubar:help" msgid "Show Configuration Folder" msgstr "Exibir Pasta de Configuração" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:476 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:558 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:476 /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:558 msgctxt "@action:menu" msgid "Configure setting visibility..." msgstr "Configurar a visibilidade dos ajustes..." @@ -3618,8 +3489,7 @@ msgctxt "@label" msgid "This package will be installed after restarting." msgstr "Este pacote será instalado após o reinício." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:17 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:17 msgctxt "@title:tab" msgid "General" msgstr "Geral" @@ -3629,14 +3499,12 @@ msgctxt "@title:tab" msgid "Settings" msgstr "Ajustes" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:473 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:473 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16 msgctxt "@title:tab" msgid "Printers" msgstr "Impressoras" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:477 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:477 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34 msgctxt "@title:tab" msgid "Profiles" msgstr "Perfis" @@ -3646,14 +3514,12 @@ msgctxt "@title:window %1 is the application name" msgid "Closing %1" msgstr "Fechando %1" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:595 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:607 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:595 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:607 msgctxt "@label %1 is the application name" msgid "Are you sure you want to exit %1?" msgstr "Tem certeza que quer sair de %1?" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:645 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:645 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19 msgctxt "@title:window" msgid "Open file(s)" msgstr "Abrir arquivo(s)" @@ -3807,8 +3673,7 @@ msgctxt "@Label" msgid "Static type checker for Python" msgstr "Verificador de tipos estáticos para Python" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157 msgctxt "@Label" msgid "Root Certificates for validating SSL trustworthiness" msgstr "Certificados raiz para validar confiança de SSL" @@ -3904,8 +3769,7 @@ msgctxt "@title:column" msgid "Current changes" msgstr "Alterações atuais" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:737 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:737 msgctxt "@option:discardOrKeep" msgid "Always ask me this" msgstr "Sempre perguntar" @@ -3982,8 +3846,7 @@ msgctxt "@text Print job name" msgid "Untitled" msgstr "Sem Título" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&File" msgstr "Arquivo (&F)" @@ -3993,14 +3856,12 @@ msgctxt "@title:menu menubar:toplevel" msgid "&Edit" msgstr "&Editar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12 msgctxt "@title:menu menubar:toplevel" msgid "&View" msgstr "&Ver" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&Settings" msgstr "Aju&stes" @@ -4569,8 +4430,7 @@ msgctxt "@info:tooltip" msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again." msgstr "Quando você faz alterações em um perfil e troca para um diferent, um diálogo aparecerá perguntando se você quer manter ou aplicar suas modificações, ou você pode forçar um comportamento default e não ter o diálogo." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:718 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:718 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52 msgctxt "@label" msgid "Profiles" msgstr "Perfis" @@ -4613,7 +4473,7 @@ msgstr "Mais informações" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:811 msgctxt "@label" msgid "Updates" -msgstr "" +msgstr "Atualizações" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:818 msgctxt "@info:tooltip" @@ -4628,22 +4488,22 @@ msgstr "Verificar atualizações na inicialização" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:834 msgctxt "@info:tooltip" msgid "When checking for updates, only check for stable releases." -msgstr "" +msgstr "Ao procurar por atualizações, somente o fazer para versões estáveis." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:839 msgctxt "@option:radio" msgid "Stable releases only" -msgstr "" +msgstr "Versões estáveis somente" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:850 msgctxt "@info:tooltip" msgid "When checking for updates, check for both stable and for beta releases." -msgstr "" +msgstr "Ao procurar por atualizações, fazer para versões estáveis ou beta." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:855 msgctxt "@option:radio" msgid "Stable and Beta releases" -msgstr "" +msgstr "Versões estáveis ou beta" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:866 msgctxt "@info:tooltip" @@ -4655,15 +4515,12 @@ msgctxt "@option:check" msgid "Get notifications for plugin updates" msgstr "" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84 msgctxt "@action:button" msgid "Activate" msgstr "Ativar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152 msgctxt "@action:button" msgid "Rename" msgstr "Renomear" @@ -4678,14 +4535,12 @@ msgctxt "@action:button" msgid "Duplicate" msgstr "Duplicar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167 msgctxt "@action:button" msgid "Import" msgstr "Importar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179 msgctxt "@action:button" msgid "Export" msgstr "Exportar" @@ -4700,20 +4555,17 @@ msgctxt "@action:label" msgid "Printer" msgstr "Impressora" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:313 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:277 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:313 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:277 msgctxt "@title:window" msgid "Confirm Remove" msgstr "Confirmar Remoção" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:316 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:278 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:316 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:278 msgctxt "@label (%1 is object name)" msgid "Are you sure you wish to remove %1? This cannot be undone!" msgstr "Tem certeza que deseja remover %1? Isto não poderá ser desfeito!" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:330 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:330 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338 msgctxt "@title:window" msgid "Import Material" msgstr "Importar Material" @@ -4728,8 +4580,7 @@ msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully imported material %1" msgstr "Material %1 importado com sucesso" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:361 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:369 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:361 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:369 msgctxt "@title:window" msgid "Export Material" msgstr "Exportar Material" @@ -4834,8 +4685,7 @@ msgctxt "@label" msgid "Adhesion Information" msgstr "Informação sobre Aderência" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 msgctxt "@label" msgid "Print settings" msgstr "Ajustes de impressão" @@ -4890,8 +4740,7 @@ msgctxt "@action:button" msgid "Update profile with current settings/overrides" msgstr "Atualizar perfil com ajustes/sobreposições atuais" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:564 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:564 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244 msgctxt "@action:button" msgid "Discard current changes" msgstr "Descartar ajustes atuais" @@ -4966,14 +4815,12 @@ msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the hotend to." msgstr "A temperatura com a qual pré-aquecer o hotend." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332 msgctxt "@button Cancel pre-heating" msgid "Cancel" msgstr "Cancelar" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335 msgctxt "@button" msgid "Pre-heat" msgstr "Pré-aquecer" @@ -5439,8 +5286,7 @@ msgctxt "@label" msgid "Could not connect to device." msgstr "Não foi possível conectar ao dispositivo." -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212 msgctxt "@label" msgid "Can't connect to your Ultimaker printer?" msgstr "Não consegue conectar à sua impressora Ultimaker?" @@ -7030,7 +6876,8 @@ msgstr "Visão de Raios-X" #~ "\n" #~ "Select your printer from the list below:" #~ msgstr "" -#~ "Para imprimir diretamente para sua impressora pela rede, por favor se certifique que a impressora esteja conectada na rede usando um cabo de rede ou conectando sua impressora na rede WIFI. Se você não conectar o Cura à sua impressora, você ainda pode usar uma unidade USB para transferir arquivos G-Code para sua impressora.\n" +#~ "Para imprimir diretamente para sua impressora pela rede, por favor se certifique que a impressora esteja conectada na rede usando um cabo de rede ou conectando sua impressora na rede WIFI. Se você não conectar o Cura à sua impressora, você ainda pode usar uma unidade USB para transferir arquivos G-" +#~ "Code para sua impressora.\n" #~ "\n" #~ "Selecione sua impressora da lista abaixo:" diff --git a/resources/i18n/pt_BR/fdmprinter.def.json.po b/resources/i18n/pt_BR/fdmprinter.def.json.po index d9651b086c..15b06de7be 100644 --- a/resources/i18n/pt_BR/fdmprinter.def.json.po +++ b/resources/i18n/pt_BR/fdmprinter.def.json.po @@ -1,13 +1,13 @@ # Cura # Copyright (C) 2020 Ultimaker B.V. # This file is distributed under the same license as the Cura package. -# +# msgid "" msgstr "" "Project-Id-Version: Cura 4.11\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2021-08-11 09:58+0000\n" -"PO-Revision-Date: 2021-06-19 06:31+0200\n" +"PO-Revision-Date: 2021-08-18 02:56+0200\n" "Last-Translator: Cláudio Sampaio \n" "Language-Team: Cláudio Sampaio \n" "Language: pt_BR\n" @@ -688,7 +688,7 @@ msgstr "Passos por Milímetro (E)" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_e description" msgid "How many steps of the stepper motors will result in moving the feeder wheel by one millimeter around its circumference." -msgstr "" +msgstr "Quantos passos dos motores resultarão no movimento da engrenagem de alimentação em um milímetro da circunferência." #: fdmprinter.def.json msgctxt "machine_endstop_positive_direction_x label" @@ -1438,12 +1438,12 @@ msgstr "Conectar caminhos de contorno da base e topo quando estiverem próximos #: fdmprinter.def.json msgctxt "skin_monotonic label" msgid "Monotonic Top/Bottom Order" -msgstr "" +msgstr "Ordem Monotônica Superior/Inferior" #: fdmprinter.def.json msgctxt "skin_monotonic description" msgid "Print top/bottom lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent." -msgstr "" +msgstr "Imprime filetes superiores e inferiores em uma ordem que os faz sempre se sobreporem a filetes adjacentes em uma única direção. Faz levar um pouco mais de tempo na impressão, mas torna superfícies planas mais consistentes." #: fdmprinter.def.json msgctxt "skin_angles label" @@ -1518,12 +1518,12 @@ msgstr "Ziguezague" #: fdmprinter.def.json msgctxt "ironing_monotonic label" msgid "Monotonic Ironing Order" -msgstr "" +msgstr "Ordem de Passagem a Ferro Monotônica" #: fdmprinter.def.json msgctxt "ironing_monotonic description" msgid "Print ironing lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent." -msgstr "" +msgstr "Imprime filetes de passagem a ferro em uma ordem que os faz com que sempre se sobreponham a linhas adjacentes em uma única direção. Isso faz levar um pouco mais de tempo na impressão, mas torna as superfícies mais consistentes." #: fdmprinter.def.json msgctxt "ironing_line_spacing label" @@ -5326,12 +5326,12 @@ msgstr "Ziguezague" #: fdmprinter.def.json msgctxt "roofing_monotonic label" msgid "Monotonic Top Surface Order" -msgstr "" +msgstr "Ordem da Superfície Monotônica Superior" #: fdmprinter.def.json msgctxt "roofing_monotonic description" msgid "Print top surface lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent." -msgstr "" +msgstr "Imprime os filetes da superfície superior em uma ordem que faz com que sempre se sobreponham a linhas adjacentes em uma única direção. Faz levar um pouco mais de tempo na impressão, mas torna as superfícies planas mais consistentes." #: fdmprinter.def.json msgctxt "roofing_angles label" diff --git a/resources/i18n/zh_TW/cura.po b/resources/i18n/zh_TW/cura.po index e54eef64a0..ad28ebb1f8 100644 --- a/resources/i18n/zh_TW/cura.po +++ b/resources/i18n/zh_TW/cura.po @@ -2,13 +2,13 @@ # Copyright (C) 2021 Ultimaker B.V. # This file is distributed under the same license as the Cura package. # Ruben Dulek , 2021. -# +# msgid "" msgstr "" "Project-Id-Version: Cura 4.11\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2021-08-11 09:59+0200\n" -"PO-Revision-Date: 2021-06-12 11:31+0800\n" +"PO-Revision-Date: 2021-08-16 19:58+0800\n" "Last-Translator: Valen Chang \n" "Language-Team: Valen Chang / Leo Hsu\n" "Language: zh_TW\n" @@ -23,27 +23,22 @@ msgctxt "@info:title" msgid "Login failed" msgstr "登入失敗" -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24 +#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24 msgctxt "@info:status" msgid "Finding new location for objects" msgstr "正在為物件尋找新位置" -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28 +#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28 msgctxt "@info:title" msgid "Finding Location" msgstr "尋找位置中" -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 -#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76 +#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76 msgctxt "@info:status" msgid "Unable to find a location within the build volume for all objects" msgstr "無法在列印範圍內放下全部物件" -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152 -#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42 +#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42 msgctxt "@info:title" msgid "Can't Find Location" msgstr "無法找到位置" @@ -53,10 +48,7 @@ msgctxt "@info:backup_failed" msgid "Could not create archive from user data directory: {}" msgstr "無法從使用者資料目錄建立備份檔：{}" -#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:122 -#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:159 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126 +#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:122 /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:159 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126 msgctxt "@info:title" msgid "Backup" msgstr "備份" @@ -277,9 +269,7 @@ msgctxt "@info:status" msgid "Only one G-code file can be loaded at a time. Skipped importing {0}" msgstr "一次只能載入一個 G-code 檔案。{0} 已跳過匯入" -#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1803 -#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:191 -#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:249 +#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1803 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:191 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:249 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177 msgctxt "@info:title" msgid "Warning" @@ -291,21 +281,14 @@ msgctxt "@info:status" msgid "Can't open any other file if G-code is loading. Skipped importing {0}" msgstr "如果載入 G-code，則無法開啟其他任何檔案。{0} 已跳過匯入" -#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1815 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:148 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:158 -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141 -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161 +#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1815 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:148 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:158 +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161 msgctxt "@info:title" msgid "Error" msgstr "錯誤" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1613 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1613 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171 msgctxt "@label" msgid "Unknown" msgstr "未知" @@ -331,45 +314,37 @@ msgctxt "@label {0} is the name of a printer that's about to be deleted." msgid "Are you sure you wish to remove {0}? This cannot be undone!" msgstr "你確定要移除 {0} 嗎？這動作無法復原!" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338 msgctxt "@label" msgid "Default" msgstr "預設值" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14 msgctxt "@label" msgid "Visual" msgstr "外觀" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15 msgctxt "@text" msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality." msgstr "外觀參數是設計來列印較高品質形狀和表面的視覺性原型和模型。" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18 msgctxt "@label" msgid "Engineering" msgstr "工程" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19 msgctxt "@text" msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances." msgstr "工程參數是設計來列印較高精度和較小公差的功能性原型和實際使用零件。" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22 msgctxt "@label" msgid "Draft" msgstr "草稿" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23 msgctxt "@text" msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction." msgstr "草稿參數是設計來縮短時間，快速列印初始原型和概念驗證。" @@ -379,8 +354,7 @@ msgctxt "@label" msgid "Custom Material" msgstr "自訂線材" -#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:225 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:230 +#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:225 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:230 msgctxt "@label" msgid "Custom" msgstr "自訂" @@ -446,21 +420,18 @@ msgctxt "@info" msgid "Unable to reach the Ultimaker account server." msgstr "無法連上 Ultimaker 帳號伺服器。" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132 msgctxt "@title:window" msgid "File Already Exists" msgstr "檔案已經存在" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133 #, python-brace-format msgctxt "@label Don't translate the XML tag !" msgid "The file {0} already exists. Are you sure you want to overwrite it?" msgstr "檔案 {0} 已存在。你確定要覆蓋掉它嗎？" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:457 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:460 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:457 /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:460 msgctxt "@info:status" msgid "Invalid file URL:" msgstr "無效的檔案網址：" @@ -512,8 +483,7 @@ msgctxt "@info:status Don't translate the XML tags !" msgid "Failed to import profile from {0}:" msgstr "從 {0} 匯入列印參數失敗：" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:244 -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:254 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:244 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:254 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "This profile {0} contains incorrect data, could not import it." @@ -585,8 +555,7 @@ msgctxt "@info:No intent profile selected" msgid "Default" msgstr "預設值" -#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:713 -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216 +#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:713 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216 msgctxt "@label" msgid "Nozzle" msgstr "噴頭" @@ -606,30 +575,20 @@ msgctxt "@info:title" msgid "Extruder(s) Disabled" msgstr "擠出機已停用" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48 msgctxt "@action:button" msgid "Add" msgstr "增加" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:272 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:272 msgctxt "@action:button" msgid "Finish" msgstr "完成" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:445 -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234 -#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:445 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293 msgctxt "@action:button" msgid "Cancel" msgstr "取消" @@ -700,30 +659,23 @@ msgctxt "@tooltip" msgid "Other" msgstr "其它" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:37 -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:61 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:37 /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:61 msgctxt "@text:window" msgid "The release notes could not be opened." -msgstr "The release notes could not be opened." +msgstr "發佈通知無法開啟." -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56 -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:259 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56 /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:259 msgctxt "@action:button" msgid "Next" msgstr "下一步" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:268 -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:55 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:268 /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:55 msgctxt "@action:button" msgid "Skip" msgstr "略過" -#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:60 -#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 -#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:174 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127 +#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:60 /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 +#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:174 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127 msgctxt "@action:button" msgid "Close" msgstr "關閉" @@ -745,8 +697,7 @@ msgctxt "@info:error Don't translate the XML tags or !" msgid "Project file {0} is suddenly inaccessible: {1}." msgstr "專案檔案 {0} 無法存取：{1}。" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641 -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:649 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:649 msgctxt "@info:title" msgid "Can't Open Project File" msgstr "無法開啟專案檔案" @@ -773,8 +724,7 @@ msgctxt "@title:tab" msgid "Custom" msgstr "自訂選項" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33 msgctxt "@item:inlistbox" msgid "3MF File" msgstr "3MF 檔案" @@ -784,8 +734,7 @@ msgctxt "@error:zip" msgid "3MF Writer plug-in is corrupt." msgstr "3MF 寫入器外掛已損壞。" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92 msgctxt "@error:zip" msgid "No permission to write the workspace here." msgstr "沒有寫入此處工作區的權限。" @@ -850,8 +799,7 @@ msgctxt "@error:file_size" msgid "The backup exceeds the maximum file size." msgstr "備份超過了最大檔案大小。" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:86 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:86 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26 msgctxt "@info:backup_status" msgid "There was an error trying to restore your backup." msgstr "嘗試恢復備份時發生錯誤。" @@ -864,34 +812,30 @@ msgstr "管理備份" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161 msgctxt "@message" msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker." -msgstr "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker." +msgstr "未知問題使切片失敗. 請考慮在我們的問題追蹤器內回報問題." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162 msgctxt "@message:title" msgid "Slicing failed" -msgstr "Slicing failed" +msgstr "切片失敗" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:166 msgctxt "@message:button" msgid "Report a bug" -msgstr "Report a bug" +msgstr "回報問題" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167 msgctxt "@message:description" msgid "Report a bug on Ultimaker Cura's issue tracker." -msgstr "Report a bug on Ultimaker Cura's issue tracker." +msgstr "於Ultimaker Cura問題追蹤器中回報問題." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:394 msgctxt "@info:status" msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." msgstr "無法使用目前線材切片，因為它與所選機器或設定不相容。" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:465 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:476 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:465 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:476 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489 msgctxt "@info:title" msgid "Unable to slice" msgstr "無法切片" @@ -932,8 +876,7 @@ msgstr "" "- 分配了一個已啟用的擠出機\n" "- 沒有全部設定成修改網格" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 msgctxt "@info:status" msgid "Processing Layers" msgstr "正在處理層" @@ -943,8 +886,7 @@ msgctxt "@info:title" msgid "Information" msgstr "資訊" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14 msgctxt "@item:inlistbox" msgid "Cura Profile" msgstr "Cura 列印參數" @@ -958,14 +900,13 @@ msgstr "無法存取更新資訊。" #, python-brace-format msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}." -msgstr "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer" -" to version {latest_version}." +msgstr "新的問題修復功能適用於您的 {machine_name}! 如果你準備好了,推薦您將列印機的軟體升級至最新版本 {latest_version}." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s stable firmware available" -msgstr "New %s stable firmware available" +msgstr "新的%s軟體已可使用" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28 msgctxt "@action:button" @@ -977,8 +918,7 @@ msgctxt "@action" msgid "Update Firmware" msgstr "更新韌體" -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17 +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17 msgctxt "@item:inlistbox" msgid "Compressed G-code File" msgstr "壓縮 G-code 檔案" @@ -988,9 +928,7 @@ msgctxt "@error:not supported" msgid "GCodeGzWriter does not support text mode." msgstr "G-code GZ 寫入器不支援非文字模式。" -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16 +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16 msgctxt "@item:inlistbox" msgid "G-code File" msgstr "G-code 檔案" @@ -1000,8 +938,7 @@ msgctxt "@info:status" msgid "Parsing G-code" msgstr "正在解析 G-code" -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349 -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503 +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503 msgctxt "@info:title" msgid "G-code Details" msgstr "G-code 細項設定" @@ -1021,8 +958,7 @@ msgctxt "@error:not supported" msgid "GCodeWriter does not support non-text mode." msgstr "G-code 寫入器不支援非文字模式。" -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 -#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96 +#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96 msgctxt "@warning:status" msgid "Please prepare G-code before exporting." msgstr "匯出前請先將 G-code 準備好。" @@ -1127,8 +1063,7 @@ msgctxt "@item:inlistbox" msgid "Save to Removable Drive {0}" msgstr "儲存到行動裝置 {0}" -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118 +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118 msgctxt "@info:status" msgid "There are no file formats available to write with!" msgstr "沒有可供寫入的檔案格式！" @@ -1144,8 +1079,7 @@ msgctxt "@info:title" msgid "Saving" msgstr "儲存中" -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108 -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111 +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not save to {0}: {1}" @@ -1157,8 +1091,7 @@ msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." msgstr "嘗試寫入到 {device} 時無法找到檔名。" -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 -#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159 +#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159 #, python-brace-format msgctxt "@info:status" msgid "Could not save to removable drive {0}: {1}" @@ -1228,8 +1161,7 @@ msgctxt "@info:title" msgid "No layers to show" msgstr "沒有列印層可顯示" -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:136 -#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:74 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:136 /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:74 msgctxt "@info:option_text" msgid "Do not show this message again" msgstr "不要再顯示這個訊息" @@ -1243,7 +1175,7 @@ msgstr "分層檢視" #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95 msgctxt "@text" msgid "Unable to read example data file." -msgstr "Unable to read example data file." +msgstr "無法讀取範例資料檔案." #: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:71 msgctxt "@info:status" @@ -1280,8 +1212,7 @@ msgctxt "@info:generic" msgid "Do you want to sync material and software packages with your account?" msgstr "你要使用你的帳號同步線材資料和軟體套件嗎？" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93 msgctxt "@info:title" msgid "Changes detected from your Ultimaker account" msgstr "從你的 Ultimaker 帳號偵測到資料更動" @@ -1301,8 +1232,7 @@ msgctxt "@button" msgid "Decline" msgstr "拒絕" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56 msgctxt "@button" msgid "Agree" msgstr "同意" @@ -1357,16 +1287,12 @@ msgctxt "@item:inlistbox" msgid "Compressed COLLADA Digital Asset Exchange" msgstr "Compressed COLLADA Digital Asset Exchange" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28 msgctxt "@item:inlistbox" msgid "Ultimaker Format Package" msgstr "Ultimaker 格式的封包" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:57 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:72 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:94 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:149 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:57 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:72 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:94 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:149 #: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:159 msgctxt "@info:error" msgid "Can't write to UFP file:" @@ -1400,12 +1326,12 @@ msgstr "透過雲端服務連接" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261 msgctxt "@action:button" msgid "Monitor print" -msgstr "Monitor print" +msgstr "監控列印" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263 msgctxt "@action:tooltip" msgid "Track the print in Ultimaker Digital Factory" -msgstr "Track the print in Ultimaker Digital Factory" +msgstr "在Ultimaker Digital Factory中追蹤您的列印" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279 #, python-brace-format @@ -1449,8 +1375,7 @@ msgid "This printer is not linked to the Digital Factory:" msgid_plural "These printers are not linked to the Digital Factory:" msgstr[0] "印表機未連到 Digital Factory：" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:331 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:331 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421 msgctxt "info:name" msgid "Ultimaker Digital Factory" msgstr "Ultimaker Digital Factory" @@ -1708,14 +1633,12 @@ msgctxt "@action:ComboBox Save settings in a new profile" msgid "Create new" msgstr "新建設定" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:75 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:75 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70 msgctxt "@action:title" msgid "Summary - Cura Project" msgstr "摘要 - Cura 專案" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:97 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:97 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94 msgctxt "@action:label" msgid "Printer settings" msgstr "印表機設定" @@ -1725,20 +1648,17 @@ msgctxt "@info:tooltip" msgid "How should the conflict in the machine be resolved?" msgstr "如何解決機器的設定衝突？" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:167 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:167 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103 msgctxt "@action:label" msgid "Type" msgstr "類型" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:183 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:183 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118 msgctxt "@action:label" msgid "Printer Group" msgstr "印表機群組" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:205 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:205 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219 msgctxt "@action:label" msgid "Profile settings" msgstr "列印參數設定" @@ -1748,28 +1668,23 @@ msgctxt "@info:tooltip" msgid "How should the conflict in the profile be resolved?" msgstr "如何解决列印參數中的設定衝突？" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:242 -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:353 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:242 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:353 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243 msgctxt "@action:label" msgid "Name" msgstr "名稱" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:258 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:258 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260 msgctxt "@action:label" msgid "Intent" msgstr "意圖" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:274 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:274 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227 msgctxt "@action:label" msgid "Not in profile" msgstr "不在列印參數中" -#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:279 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232 +#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:279 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232 msgctxt "@action:label" msgid "%1 override" msgid_plural "%1 overrides" @@ -1921,9 +1836,7 @@ msgctxt "@description" msgid "Backup and synchronize your Cura settings." msgstr "備份並同步你的 Cura 設定。" -#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:53 +#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:53 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:199 msgctxt "@button" msgid "Sign in" @@ -2074,8 +1987,7 @@ msgctxt "@item:inlistbox" msgid "Linear" msgstr "線性" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172 msgctxt "@item:inlistbox" msgid "Translucency" msgstr "半透明" @@ -2100,9 +2012,7 @@ msgctxt "@action:label" msgid "Smoothing" msgstr "平滑" -#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227 -#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361 +#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361 msgctxt "@action:button" msgid "OK" msgstr "確定" @@ -2122,18 +2032,10 @@ msgctxt "@label" msgid "Nozzle size" msgstr "噴頭孔徑" -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 -#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 +#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 msgctxt "@label" msgid "mm" msgstr "mm" @@ -2341,8 +2243,7 @@ msgctxt "@title:window" msgid "Select Settings to Customize for this model" msgstr "選擇對此模型的自訂設定" -#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96 +#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96 msgctxt "@label:textbox" msgid "Filter..." msgstr "篩選..." @@ -2383,8 +2284,7 @@ msgid "The following script is active:" msgid_plural "The following scripts are active:" msgstr[0] "下列為啟用中的腳本：" -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49 msgctxt "@label" msgid "Color scheme" msgstr "顏色方案" @@ -2439,8 +2339,7 @@ msgctxt "@label" msgid "Shell" msgstr "外殼" -#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65 +#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65 msgctxt "@label" msgid "Infill" msgstr "填充" @@ -2550,8 +2449,7 @@ msgctxt "@action:label" msgid "Website" msgstr "網站" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20 msgctxt "@action:button" msgid "Installed" msgstr "已安裝" @@ -2566,20 +2464,17 @@ msgctxt "@label:The string between and is the highlighted link" msgid "Buy material spools" msgstr "購買線材線軸" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34 msgctxt "@action:button" msgid "Update" msgstr "更新" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35 msgctxt "@action:button" msgid "Updating" msgstr "更新中" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36 msgctxt "@action:button" msgid "Updated" msgstr "更新完成" @@ -2589,8 +2484,7 @@ msgctxt "@label" msgid "Premium" msgstr "付費會員" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86 msgctxt "@info:tooltip" msgid "Go to Web Marketplace" msgstr "前往網路市集" @@ -2615,9 +2509,7 @@ msgctxt "@title:tab" msgid "Plugins" msgstr "外掛" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:475 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:475 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89 msgctxt "@title:tab" msgid "Materials" msgstr "線材" @@ -2662,9 +2554,7 @@ msgctxt "@button" msgid "Dismiss" msgstr "捨棄" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:178 msgctxt "@button" msgid "Next" @@ -2730,8 +2620,7 @@ msgctxt "@label" msgid "Last updated" msgstr "最後更新時間" -#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138 +#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138 msgctxt "@label" msgid "Brand" msgstr "品牌" @@ -2861,9 +2750,7 @@ msgctxt "@action:button" msgid "Edit" msgstr "編輯" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138 msgctxt "@action:button" msgid "Remove" @@ -2879,20 +2766,17 @@ msgctxt "@label" msgid "If your printer is not listed, read the network printing troubleshooting guide" msgstr "如果你的印表機未被列出，請閱讀網路列印故障排除指南" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263 msgctxt "@label" msgid "Type" msgstr "類型" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279 msgctxt "@label" msgid "Firmware version" msgstr "韌體版本" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295 msgctxt "@label" msgid "Address" msgstr "位址" @@ -2922,8 +2806,7 @@ msgctxt "@title:window" msgid "Invalid IP address" msgstr "無效的 IP 位址" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146 msgctxt "@text" msgid "Please enter a valid IP address." msgstr "請輸入有效的 IP 位址 。" @@ -2933,8 +2816,7 @@ msgctxt "@title:window" msgid "Printer Address" msgstr "印表機網路位址" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102 msgctxt "@label" msgid "Enter the IP address of your printer on the network." msgstr "輸入印表機的 IP 位址。" @@ -2985,8 +2867,7 @@ msgctxt "@label" msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print." msgstr "覆寫會將指定的設定套用在現有的印表機上。這可能導致列印失敗。" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184 msgctxt "@label" msgid "Glass" @@ -3007,8 +2888,7 @@ msgctxt "@label" msgid "Delete" msgstr "刪除" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:290 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:290 msgctxt "@label" msgid "Resume" msgstr "繼續" @@ -3023,9 +2903,7 @@ msgctxt "@label" msgid "Resuming..." msgstr "正在繼續..." -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:285 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:294 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:285 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:294 msgctxt "@label" msgid "Pause" msgstr "暫停" @@ -3065,8 +2943,7 @@ msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to abort %1?" msgstr "你確定要中斷 %1 嗎？" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:336 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:336 msgctxt "@window:title" msgid "Abort print" msgstr "中斷列印" @@ -3076,9 +2953,7 @@ msgctxt "@label link to Connect and Cloud interfaces" msgid "Manage printer" msgstr "管理印表機" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250 msgctxt "@info" msgid "Please update your printer's firmware to manage the queue remotely." msgstr "請更新你印表機的韌體以便遠端管理工作隊列。" @@ -3086,7 +2961,7 @@ msgstr "請更新你印表機的韌體以便遠端管理工作隊列。" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288 msgctxt "@info" msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura." -msgstr "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura." +msgstr "無法從Ultimaker Cura中查看你的雲端列印機." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348 msgctxt "@label:status" @@ -3108,8 +2983,7 @@ msgctxt "@label:status" msgid "Idle" msgstr "閒置中" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 msgctxt "@label:status" msgid "Preparing..." @@ -3150,14 +3024,12 @@ msgctxt "@label" msgid "First available" msgstr "可用的第一個" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90 msgctxt "@label:status" msgid "Aborted" msgstr "已中斷" -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 -#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82 +#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82 msgctxt "@label:status" msgid "Finished" msgstr "已完成" @@ -3242,8 +3114,7 @@ msgctxt "@action:button" msgid "Sign in" msgstr "登入" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:20 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:64 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:20 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:64 msgctxt "@label" msgid "Sign in to the Ultimaker platform" msgstr "登入Ultimaker 論壇" @@ -3594,8 +3465,7 @@ msgctxt "@action:inmenu menubar:help" msgid "Show Configuration Folder" msgstr "顯示設定資料夾" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:476 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:558 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:476 /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:558 msgctxt "@action:menu" msgid "Configure setting visibility..." msgstr "參數顯示設定..." @@ -3610,8 +3480,7 @@ msgctxt "@label" msgid "This package will be installed after restarting." msgstr "此套件將在重新啟動後安裝。" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:17 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:17 msgctxt "@title:tab" msgid "General" msgstr "基本" @@ -3621,14 +3490,12 @@ msgctxt "@title:tab" msgid "Settings" msgstr "設定" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:473 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:473 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16 msgctxt "@title:tab" msgid "Printers" msgstr "印表機" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:477 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:477 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34 msgctxt "@title:tab" msgid "Profiles" msgstr "列印參數" @@ -3638,14 +3505,12 @@ msgctxt "@title:window %1 is the application name" msgid "Closing %1" msgstr "關閉 %1 中" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:595 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:607 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:595 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:607 msgctxt "@label %1 is the application name" msgid "Are you sure you want to exit %1?" msgstr "是否確定要離開 %1 ？" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:645 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:645 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19 msgctxt "@title:window" msgid "Open file(s)" msgstr "開啟檔案" @@ -3799,8 +3664,7 @@ msgctxt "@Label" msgid "Static type checker for Python" msgstr "Python 靜態型別檢查器" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157 msgctxt "@Label" msgid "Root Certificates for validating SSL trustworthiness" msgstr "驗證 SSL 可信度用的根憑證" @@ -3896,8 +3760,7 @@ msgctxt "@title:column" msgid "Current changes" msgstr "目前更動" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:737 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:737 msgctxt "@option:discardOrKeep" msgid "Always ask me this" msgstr "總是詢問" @@ -3973,8 +3836,7 @@ msgctxt "@text Print job name" msgid "Untitled" msgstr "無標題" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&File" msgstr "檔案（&F）" @@ -3984,14 +3846,12 @@ msgctxt "@title:menu menubar:toplevel" msgid "&Edit" msgstr "編輯（&E）" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12 msgctxt "@title:menu menubar:toplevel" msgid "&View" msgstr "檢視（&V）" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&Settings" msgstr "設定（&S）" @@ -4557,8 +4417,7 @@ msgctxt "@info:tooltip" msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again." msgstr "當你對列印參數進行更改然後切換到其他列印參數時，將顯示一個對話框詢問你是否要保留修改。你也可以選擇預設不顯示該對話框。" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:718 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:718 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52 msgctxt "@label" msgid "Profiles" msgstr "列印參數" @@ -4601,7 +4460,7 @@ msgstr "更多資訊" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:811 msgctxt "@label" msgid "Updates" -msgstr "Updates" +msgstr "更新" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:818 msgctxt "@info:tooltip" @@ -4616,42 +4475,39 @@ msgstr "啟動時檢查更新" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:834 msgctxt "@info:tooltip" msgid "When checking for updates, only check for stable releases." -msgstr "When checking for updates, only check for stable releases." +msgstr "當檢查更新時，只檢查正式版本." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:839 msgctxt "@option:radio" msgid "Stable releases only" -msgstr "Stable releases only" +msgstr "僅正式版本" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:850 msgctxt "@info:tooltip" msgid "When checking for updates, check for both stable and for beta releases." -msgstr "When checking for updates, check for both stable and for beta releases." +msgstr "當檢查更新時，同時檢查正式版本與測試版本." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:855 msgctxt "@option:radio" msgid "Stable and Beta releases" -msgstr "Stable and Beta releases" +msgstr "正式版本與測試版本發佈" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:866 msgctxt "@info:tooltip" msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!" -msgstr "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!" +msgstr "需要於開啟Cura時自動更新插件嗎? 建議您勿關閉此功能!" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:871 msgctxt "@option:check" msgid "Get notifications for plugin updates" -msgstr "Get notifications for plugin updates" +msgstr "設定插件更新提示" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84 msgctxt "@action:button" msgid "Activate" msgstr "啟用" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152 msgctxt "@action:button" msgid "Rename" msgstr "重命名" @@ -4666,14 +4522,12 @@ msgctxt "@action:button" msgid "Duplicate" msgstr "複製" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167 msgctxt "@action:button" msgid "Import" msgstr "匯入" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179 msgctxt "@action:button" msgid "Export" msgstr "匯出" @@ -4688,20 +4542,17 @@ msgctxt "@action:label" msgid "Printer" msgstr "印表機" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:313 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:277 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:313 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:277 msgctxt "@title:window" msgid "Confirm Remove" msgstr "移除確認" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:316 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:278 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:316 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:278 msgctxt "@label (%1 is object name)" msgid "Are you sure you wish to remove %1? This cannot be undone!" msgstr "你確定要移除 %1 嗎？這動作無法復原！" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:330 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:330 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338 msgctxt "@title:window" msgid "Import Material" msgstr "匯入線材設定" @@ -4716,8 +4567,7 @@ msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully imported material %1" msgstr "成功匯入線材 %1" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:361 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:369 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:361 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:369 msgctxt "@title:window" msgid "Export Material" msgstr "匯出線材設定" @@ -4822,8 +4672,7 @@ msgctxt "@label" msgid "Adhesion Information" msgstr "附著資訊" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 msgctxt "@label" msgid "Print settings" msgstr "列印設定" @@ -4878,8 +4727,7 @@ msgctxt "@action:button" msgid "Update profile with current settings/overrides" msgstr "使用目前設定 / 覆寫值更新列印參數" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:564 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:564 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244 msgctxt "@action:button" msgid "Discard current changes" msgstr "捨棄目前更改" @@ -4954,14 +4802,12 @@ msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the hotend to." msgstr "加熱頭預熱溫度。" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332 msgctxt "@button Cancel pre-heating" msgid "Cancel" msgstr "取消" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335 msgctxt "@button" msgid "Pre-heat" msgstr "預熱" @@ -5426,8 +5272,7 @@ msgctxt "@label" msgid "Could not connect to device." msgstr "無法連接到裝置。" -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 -#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212 +#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212 msgctxt "@label" msgid "Can't connect to your Ultimaker printer?" msgstr "無法連接到 Ultimaker 印表機？" diff --git a/resources/i18n/zh_TW/fdmprinter.def.json.po b/resources/i18n/zh_TW/fdmprinter.def.json.po index 9938fa87c8..233a49e908 100644 --- a/resources/i18n/zh_TW/fdmprinter.def.json.po +++ b/resources/i18n/zh_TW/fdmprinter.def.json.po @@ -2,13 +2,13 @@ # Copyright (C) 2021 Ultimaker B.V. # This file is distributed under the same license as the Cura package. # Ruben Dulek , 2021. -# +# msgid "" msgstr "" "Project-Id-Version: Cura 4.11\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2021-08-11 09:58+0000\n" -"PO-Revision-Date: 2021-06-14 16:21+0800\n" +"PO-Revision-Date: 2021-08-16 20:48+0800\n" "Last-Translator: Valen Chang \n" "Language-Team: Valen Chang /Zhang Heh Ji \n" "Language: zh_TW\n" @@ -688,7 +688,11 @@ msgstr "每毫米的步數（E）" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_e description" msgid "How many steps of the stepper motors will result in moving the feeder wheel by one millimeter around its circumference." +<<<<<<< HEAD msgstr "How many steps of the stepper motors will result in moving the feeder wheel by one millimeter around its circumference." +======= +msgstr "在擠出輪旋轉一毫米時，步進馬達所需移動的步數." +>>>>>>> 4.11 #: fdmprinter.def.json msgctxt "machine_endstop_positive_direction_x label" @@ -1438,13 +1442,21 @@ msgstr "將頂部/底部表層路徑相鄰的位置連接。同心模式時啟 #: fdmprinter.def.json msgctxt "skin_monotonic label" msgid "Monotonic Top/Bottom Order" +<<<<<<< HEAD msgstr "Monotonic Top/Bottom Order" +======= +msgstr "Monotonic列印 頂層/底層 順序" +>>>>>>> 4.11 #: fdmprinter.def.json msgctxt "skin_monotonic description" msgid "Print top/bottom lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent." +<<<<<<< HEAD msgstr "Print top/bottom lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print," " but makes flat surfaces look more consistent." +======= +msgstr "再列印頂層/底層線條時，命令相鄰線條於單方向重疊. 雖然會花更多時間列印，但會使平面更平整." +>>>>>>> 4.11 #: fdmprinter.def.json msgctxt "skin_angles label" @@ -1519,13 +1531,21 @@ msgstr "鋸齒狀" #: fdmprinter.def.json msgctxt "ironing_monotonic label" msgid "Monotonic Ironing Order" +<<<<<<< HEAD msgstr "Monotonic Ironing Order" +======= +msgstr "Monotonous燙平順序" +>>>>>>> 4.11 #: fdmprinter.def.json msgctxt "ironing_monotonic description" msgid "Print ironing lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent." +<<<<<<< HEAD msgstr "Print ironing lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print," " but makes flat surfaces look more consistent." +======= +msgstr "再使用燙平列印線條時，命令相鄰線條於單方向重疊。雖然會花更多時間列印，但會使平面更平整." +>>>>>>> 4.11 #: fdmprinter.def.json msgctxt "ironing_line_spacing label" @@ -5328,13 +5348,21 @@ msgstr "鋸齒狀" #: fdmprinter.def.json msgctxt "roofing_monotonic label" msgid "Monotonic Top Surface Order" +<<<<<<< HEAD msgstr "Monotonic Top Surface Order" +======= +msgstr "頂層Monotonic列印順序" +>>>>>>> 4.11 #: fdmprinter.def.json msgctxt "roofing_monotonic description" msgid "Print top surface lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent." +<<<<<<< HEAD msgstr "Print top surface lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print," " but makes flat surfaces look more consistent." +======= +msgstr "再列印頂層表面線條時，命令相鄰線條於單方向重疊. 雖然會花更多時間列印，但會使平面更平整." +>>>>>>> 4.11 #: fdmprinter.def.json msgctxt "roofing_angles label"