diff --git a/resources/definitions/dagoma_discoeasy200.def.json b/resources/definitions/dagoma_discoeasy200.def.json
index 8f1a792bc0..3b62ff042f 100644
--- a/resources/definitions/dagoma_discoeasy200.def.json
+++ b/resources/definitions/dagoma_discoeasy200.def.json
@@ -8,7 +8,7 @@
         "author": "Dagoma",
         "manufacturer": "Dagoma",
         "file_formats": "text/x-gcode",
-        "icon": "icon_ultimaker2.png",
+        "icon": "icon_discoeasy200.png",
         "platform": "discoeasy200.stl",
         "platform_offset": [ 105, -59, 280]
     },
@@ -30,24 +30,23 @@
         },
         "machine_head_with_fans_polygon": {
             "default_value": [
-                [16, 37],
-                [16, -65],
-                [-16, -65],
-                [16, 37]
+                [17, 70],
+                [17, -40],
+                [-17, -40],
+                [17, 70]
             ]
         },
         "gantry_height": {
-            "default_value": 55
-        },
-        "machine_gcode_flavor": {
-            "default_value": "RepRap"
+            "default_value": 10
         },
         "machine_start_gcode": {
-            "default_value": ";Gcode by Cura\nG90   ;absolute positioning\nM106 S250 ;fan on for the palpeur\nG28 X Y\nG1 X50\nM109 S180\nG28\nM104 S{print_temperature}\n;Activation palpeur\n;bloc palpeur\nG29 ;Auto level\nM107 ;start with the fan off\nG1 X100 Y20 F3000\nG1 Z0.5\nM109 S{print_temperature}\nM140 S{material_bed_temperature}\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z3\nG1 F3000\n"
+            "default_value": ";Gcode by Cura\nG90   ;absolute positioning\nM106 S250 ;fan on for the palpeur\nG28 X Y\nG1 X50\nM109 S180\nG28\nM104 S{material_print_temperature_layer_0}\n;Activation palpeur\n;bloc palpeur\nG29 ;Auto level\nM107 ;start with the fan off\nG1 X100 Y20 F3000\nG1 Z0.5\nM109 S{material_print_temperature_layer_0}\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z3\nG1 F6000"
         },
         "machine_end_gcode": {
-            "default_value": "\nM104 S0\nM106 S255   ;start fan full power\nM140 S0   ;heated bed heater off (if you have it)\n;Home machine\nG91   ;relative positioning\nG1 E-1 F{retraction_speed} ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+3 F3000  ;move Z up a bit and retract filament even more\nG90\nG28 X Y\n;Ventilation forcee\nM107    ;stop fan\n;Shut down motor\nM84   ;shut down motors\n"
+            "default_value": "M104 S0\nM106 S255   ;start fan full power\nM140 S0   ;heated bed heater off (if you have it)\n;Home machine\nG91   ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+3 F3000  ;move Z up a bit and retract filament even more\nG90\nG28 X Y\n;Ventilation forcee\nM107    ;stop fan\n;Shut down motor\nM84   ;shut down motors"
+        },
+        "material_diameter": {
+            "default_value": 1.75
         }
     }
 }
-
diff --git a/resources/qml/Sidebar.qml b/resources/qml/Sidebar.qml
index 383c599da8..31bda45b56 100644
--- a/resources/qml/Sidebar.qml
+++ b/resources/qml/Sidebar.qml
@@ -343,7 +343,6 @@ Rectangle
 
                 onEntered:
                 {
-
                     if(base.printDuration.valid && !base.printDuration.isTotalDurationZero)
                     {
                         // All the time information for the different features is achieved
@@ -356,20 +355,10 @@ Rectangle
                         {
                             if(!print_time[feature].isTotalDurationZero)
                             {
-                                var feature_name = "";
-
-                                if (feature.length <= 11)
-                                {
-                                    feature_name = feature
-                                }
-                                else{
-                                    feature_name = feature.substring(0, 8) + "..."
-                                }
-
-
-                                content += "<tr><td>" + feature_name + ":" +
-                                    "&nbsp;&nbsp;</td><td>" + print_time[feature].getDisplayString(UM.DurationFormat.Short) +
-                                    "&nbsp;&nbsp;</td><td>" + Math.round(100 * parseInt(print_time[feature].getDisplayString(UM.DurationFormat.Seconds)) / total_seconds) + "%" +
+                                content += "<tr><td colspan='2'>" + feature + "</td></tr>" +
+                                    "<tr>" +
+                                    "<td width='60%'>" + print_time[feature].getDisplayString(UM.DurationFormat.Short) + "</td>" +
+                                    "<td width='40%'>&nbsp;&nbsp;" + Math.round(100 * parseInt(print_time[feature].getDisplayString(UM.DurationFormat.Seconds)) / total_seconds) + "%" +
                                     "</td></tr>";
                             }
                         }