diff --git a/resources/i18n/cs_CZ/gradual_flow_settings.def.json.po b/resources/i18n/cs_CZ/gradual_flow_settings.def.json.po index 363b0994aa..2529ed73e4 100644 --- a/resources/i18n/cs_CZ/gradual_flow_settings.def.json.po +++ b/resources/i18n/cs_CZ/gradual_flow_settings.def.json.po @@ -15,40 +15,40 @@ msgstr "" msgctxt "gradual_flow_discretisation_step_size description" msgid "Duration of each step in the gradual flow change" -msgstr "Duration of each step in the gradual flow change" +msgstr "" msgctxt "gradual_flow_enabled description" msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" msgctxt "reset_flow_duration description" msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" msgctxt "gradual_flow_discretisation_step_size label" msgid "Gradual flow discretisation step size" -msgstr "Gradual flow discretisation step size" +msgstr "" msgctxt "gradual_flow_enabled label" msgid "Gradual flow enabled" -msgstr "Gradual flow enabled" +msgstr "" msgctxt "max_flow_acceleration label" msgid "Gradual flow max acceleration" -msgstr "Gradual flow max acceleration" +msgstr "" msgctxt "layer_0_max_flow_acceleration label" msgid "Initial layer max flow acceleration" -msgstr "Initial layer max flow acceleration" +msgstr "" msgctxt "max_flow_acceleration description" msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximum acceleration for gradual flow changes" +msgstr "" msgctxt "layer_0_max_flow_acceleration description" msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimum speed for gradual flow changes for the first layer" +msgstr "" msgctxt "reset_flow_duration label" msgid "Reset flow duration" -msgstr "Reset flow duration" +msgstr "" diff --git a/resources/i18n/de_DE/gradual_flow_settings.def.json.po b/resources/i18n/de_DE/gradual_flow_settings.def.json.po index 363b0994aa..2529ed73e4 100644 --- a/resources/i18n/de_DE/gradual_flow_settings.def.json.po +++ b/resources/i18n/de_DE/gradual_flow_settings.def.json.po @@ -15,40 +15,40 @@ msgstr "" msgctxt "gradual_flow_discretisation_step_size description" msgid "Duration of each step in the gradual flow change" -msgstr "Duration of each step in the gradual flow change" +msgstr "" msgctxt "gradual_flow_enabled description" msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" msgctxt "reset_flow_duration description" msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" msgctxt "gradual_flow_discretisation_step_size label" msgid "Gradual flow discretisation step size" -msgstr "Gradual flow discretisation step size" +msgstr "" msgctxt "gradual_flow_enabled label" msgid "Gradual flow enabled" -msgstr "Gradual flow enabled" +msgstr "" msgctxt "max_flow_acceleration label" msgid "Gradual flow max acceleration" -msgstr "Gradual flow max acceleration" +msgstr "" msgctxt "layer_0_max_flow_acceleration label" msgid "Initial layer max flow acceleration" -msgstr "Initial layer max flow acceleration" +msgstr "" msgctxt "max_flow_acceleration description" msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximum acceleration for gradual flow changes" +msgstr "" msgctxt "layer_0_max_flow_acceleration description" msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimum speed for gradual flow changes for the first layer" +msgstr "" msgctxt "reset_flow_duration label" msgid "Reset flow duration" -msgstr "Reset flow duration" +msgstr "" diff --git a/resources/i18n/es_ES/gradual_flow_settings.def.json.po b/resources/i18n/es_ES/gradual_flow_settings.def.json.po index 363b0994aa..3078cba7bf 100644 --- a/resources/i18n/es_ES/gradual_flow_settings.def.json.po +++ b/resources/i18n/es_ES/gradual_flow_settings.def.json.po @@ -15,39 +15,39 @@ msgstr "" msgctxt "gradual_flow_discretisation_step_size description" msgid "Duration of each step in the gradual flow change" -msgstr "Duration of each step in the gradual flow change" +msgstr "" msgctxt "gradual_flow_enabled description" msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" msgctxt "reset_flow_duration description" msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" msgctxt "gradual_flow_discretisation_step_size label" msgid "Gradual flow discretisation step size" -msgstr "Gradual flow discretisation step size" +msgstr "" msgctxt "gradual_flow_enabled label" msgid "Gradual flow enabled" -msgstr "Gradual flow enabled" +msgstr "" msgctxt "max_flow_acceleration label" msgid "Gradual flow max acceleration" -msgstr "Gradual flow max acceleration" +msgstr "" msgctxt "layer_0_max_flow_acceleration label" msgid "Initial layer max flow acceleration" -msgstr "Initial layer max flow acceleration" +msgstr "" msgctxt "max_flow_acceleration description" msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximum acceleration for gradual flow changes" +msgstr "" msgctxt "layer_0_max_flow_acceleration description" msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimum speed for gradual flow changes for the first layer" +msgstr "" msgctxt "reset_flow_duration label" msgid "Reset flow duration" diff --git a/resources/i18n/fi_FI/gradual_flow_settings.def.json.po b/resources/i18n/fi_FI/gradual_flow_settings.def.json.po index 363b0994aa..3078cba7bf 100644 --- a/resources/i18n/fi_FI/gradual_flow_settings.def.json.po +++ b/resources/i18n/fi_FI/gradual_flow_settings.def.json.po @@ -15,39 +15,39 @@ msgstr "" msgctxt "gradual_flow_discretisation_step_size description" msgid "Duration of each step in the gradual flow change" -msgstr "Duration of each step in the gradual flow change" +msgstr "" msgctxt "gradual_flow_enabled description" msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" msgctxt "reset_flow_duration description" msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" msgctxt "gradual_flow_discretisation_step_size label" msgid "Gradual flow discretisation step size" -msgstr "Gradual flow discretisation step size" +msgstr "" msgctxt "gradual_flow_enabled label" msgid "Gradual flow enabled" -msgstr "Gradual flow enabled" +msgstr "" msgctxt "max_flow_acceleration label" msgid "Gradual flow max acceleration" -msgstr "Gradual flow max acceleration" +msgstr "" msgctxt "layer_0_max_flow_acceleration label" msgid "Initial layer max flow acceleration" -msgstr "Initial layer max flow acceleration" +msgstr "" msgctxt "max_flow_acceleration description" msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximum acceleration for gradual flow changes" +msgstr "" msgctxt "layer_0_max_flow_acceleration description" msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimum speed for gradual flow changes for the first layer" +msgstr "" msgctxt "reset_flow_duration label" msgid "Reset flow duration" diff --git a/resources/i18n/fr_FR/gradual_flow_settings.def.json.po b/resources/i18n/fr_FR/gradual_flow_settings.def.json.po index 363b0994aa..3078cba7bf 100644 --- a/resources/i18n/fr_FR/gradual_flow_settings.def.json.po +++ b/resources/i18n/fr_FR/gradual_flow_settings.def.json.po @@ -15,39 +15,39 @@ msgstr "" msgctxt "gradual_flow_discretisation_step_size description" msgid "Duration of each step in the gradual flow change" -msgstr "Duration of each step in the gradual flow change" +msgstr "" msgctxt "gradual_flow_enabled description" msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" msgctxt "reset_flow_duration description" msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" msgctxt "gradual_flow_discretisation_step_size label" msgid "Gradual flow discretisation step size" -msgstr "Gradual flow discretisation step size" +msgstr "" msgctxt "gradual_flow_enabled label" msgid "Gradual flow enabled" -msgstr "Gradual flow enabled" +msgstr "" msgctxt "max_flow_acceleration label" msgid "Gradual flow max acceleration" -msgstr "Gradual flow max acceleration" +msgstr "" msgctxt "layer_0_max_flow_acceleration label" msgid "Initial layer max flow acceleration" -msgstr "Initial layer max flow acceleration" +msgstr "" msgctxt "max_flow_acceleration description" msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximum acceleration for gradual flow changes" +msgstr "" msgctxt "layer_0_max_flow_acceleration description" msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimum speed for gradual flow changes for the first layer" +msgstr "" msgctxt "reset_flow_duration label" msgid "Reset flow duration" diff --git a/resources/i18n/hu_HU/gradual_flow_settings.def.json.po b/resources/i18n/hu_HU/gradual_flow_settings.def.json.po index 363b0994aa..2529ed73e4 100644 --- a/resources/i18n/hu_HU/gradual_flow_settings.def.json.po +++ b/resources/i18n/hu_HU/gradual_flow_settings.def.json.po @@ -15,40 +15,40 @@ msgstr "" msgctxt "gradual_flow_discretisation_step_size description" msgid "Duration of each step in the gradual flow change" -msgstr "Duration of each step in the gradual flow change" +msgstr "" msgctxt "gradual_flow_enabled description" msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" msgctxt "reset_flow_duration description" msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" msgctxt "gradual_flow_discretisation_step_size label" msgid "Gradual flow discretisation step size" -msgstr "Gradual flow discretisation step size" +msgstr "" msgctxt "gradual_flow_enabled label" msgid "Gradual flow enabled" -msgstr "Gradual flow enabled" +msgstr "" msgctxt "max_flow_acceleration label" msgid "Gradual flow max acceleration" -msgstr "Gradual flow max acceleration" +msgstr "" msgctxt "layer_0_max_flow_acceleration label" msgid "Initial layer max flow acceleration" -msgstr "Initial layer max flow acceleration" +msgstr "" msgctxt "max_flow_acceleration description" msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximum acceleration for gradual flow changes" +msgstr "" msgctxt "layer_0_max_flow_acceleration description" msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimum speed for gradual flow changes for the first layer" +msgstr "" msgctxt "reset_flow_duration label" msgid "Reset flow duration" -msgstr "Reset flow duration" +msgstr "" diff --git a/resources/i18n/it_IT/gradual_flow_settings.def.json.po b/resources/i18n/it_IT/gradual_flow_settings.def.json.po index 363b0994aa..2529ed73e4 100644 --- a/resources/i18n/it_IT/gradual_flow_settings.def.json.po +++ b/resources/i18n/it_IT/gradual_flow_settings.def.json.po @@ -15,40 +15,40 @@ msgstr "" msgctxt "gradual_flow_discretisation_step_size description" msgid "Duration of each step in the gradual flow change" -msgstr "Duration of each step in the gradual flow change" +msgstr "" msgctxt "gradual_flow_enabled description" msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" msgctxt "reset_flow_duration description" msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" msgctxt "gradual_flow_discretisation_step_size label" msgid "Gradual flow discretisation step size" -msgstr "Gradual flow discretisation step size" +msgstr "" msgctxt "gradual_flow_enabled label" msgid "Gradual flow enabled" -msgstr "Gradual flow enabled" +msgstr "" msgctxt "max_flow_acceleration label" msgid "Gradual flow max acceleration" -msgstr "Gradual flow max acceleration" +msgstr "" msgctxt "layer_0_max_flow_acceleration label" msgid "Initial layer max flow acceleration" -msgstr "Initial layer max flow acceleration" +msgstr "" msgctxt "max_flow_acceleration description" msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximum acceleration for gradual flow changes" +msgstr "" msgctxt "layer_0_max_flow_acceleration description" msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimum speed for gradual flow changes for the first layer" +msgstr "" msgctxt "reset_flow_duration label" msgid "Reset flow duration" -msgstr "Reset flow duration" +msgstr "" diff --git a/resources/i18n/ja_JP/gradual_flow_settings.def.json.po b/resources/i18n/ja_JP/gradual_flow_settings.def.json.po index 363b0994aa..2529ed73e4 100644 --- a/resources/i18n/ja_JP/gradual_flow_settings.def.json.po +++ b/resources/i18n/ja_JP/gradual_flow_settings.def.json.po @@ -15,40 +15,40 @@ msgstr "" msgctxt "gradual_flow_discretisation_step_size description" msgid "Duration of each step in the gradual flow change" -msgstr "Duration of each step in the gradual flow change" +msgstr "" msgctxt "gradual_flow_enabled description" msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" msgctxt "reset_flow_duration description" msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" msgctxt "gradual_flow_discretisation_step_size label" msgid "Gradual flow discretisation step size" -msgstr "Gradual flow discretisation step size" +msgstr "" msgctxt "gradual_flow_enabled label" msgid "Gradual flow enabled" -msgstr "Gradual flow enabled" +msgstr "" msgctxt "max_flow_acceleration label" msgid "Gradual flow max acceleration" -msgstr "Gradual flow max acceleration" +msgstr "" msgctxt "layer_0_max_flow_acceleration label" msgid "Initial layer max flow acceleration" -msgstr "Initial layer max flow acceleration" +msgstr "" msgctxt "max_flow_acceleration description" msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximum acceleration for gradual flow changes" +msgstr "" msgctxt "layer_0_max_flow_acceleration description" msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimum speed for gradual flow changes for the first layer" +msgstr "" msgctxt "reset_flow_duration label" msgid "Reset flow duration" -msgstr "Reset flow duration" +msgstr "" diff --git a/resources/i18n/ko_KR/gradual_flow_settings.def.json.po b/resources/i18n/ko_KR/gradual_flow_settings.def.json.po index 363b0994aa..2529ed73e4 100644 --- a/resources/i18n/ko_KR/gradual_flow_settings.def.json.po +++ b/resources/i18n/ko_KR/gradual_flow_settings.def.json.po @@ -15,40 +15,40 @@ msgstr "" msgctxt "gradual_flow_discretisation_step_size description" msgid "Duration of each step in the gradual flow change" -msgstr "Duration of each step in the gradual flow change" +msgstr "" msgctxt "gradual_flow_enabled description" msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" msgctxt "reset_flow_duration description" msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" msgctxt "gradual_flow_discretisation_step_size label" msgid "Gradual flow discretisation step size" -msgstr "Gradual flow discretisation step size" +msgstr "" msgctxt "gradual_flow_enabled label" msgid "Gradual flow enabled" -msgstr "Gradual flow enabled" +msgstr "" msgctxt "max_flow_acceleration label" msgid "Gradual flow max acceleration" -msgstr "Gradual flow max acceleration" +msgstr "" msgctxt "layer_0_max_flow_acceleration label" msgid "Initial layer max flow acceleration" -msgstr "Initial layer max flow acceleration" +msgstr "" msgctxt "max_flow_acceleration description" msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximum acceleration for gradual flow changes" +msgstr "" msgctxt "layer_0_max_flow_acceleration description" msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimum speed for gradual flow changes for the first layer" +msgstr "" msgctxt "reset_flow_duration label" msgid "Reset flow duration" -msgstr "Reset flow duration" +msgstr "" diff --git a/resources/i18n/nl_NL/gradual_flow_settings.def.json.po b/resources/i18n/nl_NL/gradual_flow_settings.def.json.po index 363b0994aa..3078cba7bf 100644 --- a/resources/i18n/nl_NL/gradual_flow_settings.def.json.po +++ b/resources/i18n/nl_NL/gradual_flow_settings.def.json.po @@ -15,39 +15,39 @@ msgstr "" msgctxt "gradual_flow_discretisation_step_size description" msgid "Duration of each step in the gradual flow change" -msgstr "Duration of each step in the gradual flow change" +msgstr "" msgctxt "gradual_flow_enabled description" msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" msgctxt "reset_flow_duration description" msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" msgctxt "gradual_flow_discretisation_step_size label" msgid "Gradual flow discretisation step size" -msgstr "Gradual flow discretisation step size" +msgstr "" msgctxt "gradual_flow_enabled label" msgid "Gradual flow enabled" -msgstr "Gradual flow enabled" +msgstr "" msgctxt "max_flow_acceleration label" msgid "Gradual flow max acceleration" -msgstr "Gradual flow max acceleration" +msgstr "" msgctxt "layer_0_max_flow_acceleration label" msgid "Initial layer max flow acceleration" -msgstr "Initial layer max flow acceleration" +msgstr "" msgctxt "max_flow_acceleration description" msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximum acceleration for gradual flow changes" +msgstr "" msgctxt "layer_0_max_flow_acceleration description" msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimum speed for gradual flow changes for the first layer" +msgstr "" msgctxt "reset_flow_duration label" msgid "Reset flow duration" diff --git a/resources/i18n/pl_PL/gradual_flow_settings.def.json.po b/resources/i18n/pl_PL/gradual_flow_settings.def.json.po index 363b0994aa..2529ed73e4 100644 --- a/resources/i18n/pl_PL/gradual_flow_settings.def.json.po +++ b/resources/i18n/pl_PL/gradual_flow_settings.def.json.po @@ -15,40 +15,40 @@ msgstr "" msgctxt "gradual_flow_discretisation_step_size description" msgid "Duration of each step in the gradual flow change" -msgstr "Duration of each step in the gradual flow change" +msgstr "" msgctxt "gradual_flow_enabled description" msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" msgctxt "reset_flow_duration description" msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" msgctxt "gradual_flow_discretisation_step_size label" msgid "Gradual flow discretisation step size" -msgstr "Gradual flow discretisation step size" +msgstr "" msgctxt "gradual_flow_enabled label" msgid "Gradual flow enabled" -msgstr "Gradual flow enabled" +msgstr "" msgctxt "max_flow_acceleration label" msgid "Gradual flow max acceleration" -msgstr "Gradual flow max acceleration" +msgstr "" msgctxt "layer_0_max_flow_acceleration label" msgid "Initial layer max flow acceleration" -msgstr "Initial layer max flow acceleration" +msgstr "" msgctxt "max_flow_acceleration description" msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximum acceleration for gradual flow changes" +msgstr "" msgctxt "layer_0_max_flow_acceleration description" msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimum speed for gradual flow changes for the first layer" +msgstr "" msgctxt "reset_flow_duration label" msgid "Reset flow duration" -msgstr "Reset flow duration" +msgstr "" diff --git a/resources/i18n/pt_BR/gradual_flow_settings.def.json.po b/resources/i18n/pt_BR/gradual_flow_settings.def.json.po index 363b0994aa..2529ed73e4 100644 --- a/resources/i18n/pt_BR/gradual_flow_settings.def.json.po +++ b/resources/i18n/pt_BR/gradual_flow_settings.def.json.po @@ -15,40 +15,40 @@ msgstr "" msgctxt "gradual_flow_discretisation_step_size description" msgid "Duration of each step in the gradual flow change" -msgstr "Duration of each step in the gradual flow change" +msgstr "" msgctxt "gradual_flow_enabled description" msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" msgctxt "reset_flow_duration description" msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" msgctxt "gradual_flow_discretisation_step_size label" msgid "Gradual flow discretisation step size" -msgstr "Gradual flow discretisation step size" +msgstr "" msgctxt "gradual_flow_enabled label" msgid "Gradual flow enabled" -msgstr "Gradual flow enabled" +msgstr "" msgctxt "max_flow_acceleration label" msgid "Gradual flow max acceleration" -msgstr "Gradual flow max acceleration" +msgstr "" msgctxt "layer_0_max_flow_acceleration label" msgid "Initial layer max flow acceleration" -msgstr "Initial layer max flow acceleration" +msgstr "" msgctxt "max_flow_acceleration description" msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximum acceleration for gradual flow changes" +msgstr "" msgctxt "layer_0_max_flow_acceleration description" msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimum speed for gradual flow changes for the first layer" +msgstr "" msgctxt "reset_flow_duration label" msgid "Reset flow duration" -msgstr "Reset flow duration" +msgstr "" diff --git a/resources/i18n/pt_PT/gradual_flow_settings.def.json.po b/resources/i18n/pt_PT/gradual_flow_settings.def.json.po index 363b0994aa..2529ed73e4 100644 --- a/resources/i18n/pt_PT/gradual_flow_settings.def.json.po +++ b/resources/i18n/pt_PT/gradual_flow_settings.def.json.po @@ -15,40 +15,40 @@ msgstr "" msgctxt "gradual_flow_discretisation_step_size description" msgid "Duration of each step in the gradual flow change" -msgstr "Duration of each step in the gradual flow change" +msgstr "" msgctxt "gradual_flow_enabled description" msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" msgctxt "reset_flow_duration description" msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" msgctxt "gradual_flow_discretisation_step_size label" msgid "Gradual flow discretisation step size" -msgstr "Gradual flow discretisation step size" +msgstr "" msgctxt "gradual_flow_enabled label" msgid "Gradual flow enabled" -msgstr "Gradual flow enabled" +msgstr "" msgctxt "max_flow_acceleration label" msgid "Gradual flow max acceleration" -msgstr "Gradual flow max acceleration" +msgstr "" msgctxt "layer_0_max_flow_acceleration label" msgid "Initial layer max flow acceleration" -msgstr "Initial layer max flow acceleration" +msgstr "" msgctxt "max_flow_acceleration description" msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximum acceleration for gradual flow changes" +msgstr "" msgctxt "layer_0_max_flow_acceleration description" msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimum speed for gradual flow changes for the first layer" +msgstr "" msgctxt "reset_flow_duration label" msgid "Reset flow duration" -msgstr "Reset flow duration" +msgstr "" diff --git a/resources/i18n/ru_RU/gradual_flow_settings.def.json.po b/resources/i18n/ru_RU/gradual_flow_settings.def.json.po index 363b0994aa..2529ed73e4 100644 --- a/resources/i18n/ru_RU/gradual_flow_settings.def.json.po +++ b/resources/i18n/ru_RU/gradual_flow_settings.def.json.po @@ -15,40 +15,40 @@ msgstr "" msgctxt "gradual_flow_discretisation_step_size description" msgid "Duration of each step in the gradual flow change" -msgstr "Duration of each step in the gradual flow change" +msgstr "" msgctxt "gradual_flow_enabled description" msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" msgctxt "reset_flow_duration description" msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" msgctxt "gradual_flow_discretisation_step_size label" msgid "Gradual flow discretisation step size" -msgstr "Gradual flow discretisation step size" +msgstr "" msgctxt "gradual_flow_enabled label" msgid "Gradual flow enabled" -msgstr "Gradual flow enabled" +msgstr "" msgctxt "max_flow_acceleration label" msgid "Gradual flow max acceleration" -msgstr "Gradual flow max acceleration" +msgstr "" msgctxt "layer_0_max_flow_acceleration label" msgid "Initial layer max flow acceleration" -msgstr "Initial layer max flow acceleration" +msgstr "" msgctxt "max_flow_acceleration description" msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximum acceleration for gradual flow changes" +msgstr "" msgctxt "layer_0_max_flow_acceleration description" msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimum speed for gradual flow changes for the first layer" +msgstr "" msgctxt "reset_flow_duration label" msgid "Reset flow duration" -msgstr "Reset flow duration" +msgstr "" diff --git a/resources/i18n/tr_TR/gradual_flow_settings.def.json.po b/resources/i18n/tr_TR/gradual_flow_settings.def.json.po index 363b0994aa..2529ed73e4 100644 --- a/resources/i18n/tr_TR/gradual_flow_settings.def.json.po +++ b/resources/i18n/tr_TR/gradual_flow_settings.def.json.po @@ -15,40 +15,40 @@ msgstr "" msgctxt "gradual_flow_discretisation_step_size description" msgid "Duration of each step in the gradual flow change" -msgstr "Duration of each step in the gradual flow change" +msgstr "" msgctxt "gradual_flow_enabled description" msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" msgctxt "reset_flow_duration description" msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" msgctxt "gradual_flow_discretisation_step_size label" msgid "Gradual flow discretisation step size" -msgstr "Gradual flow discretisation step size" +msgstr "" msgctxt "gradual_flow_enabled label" msgid "Gradual flow enabled" -msgstr "Gradual flow enabled" +msgstr "" msgctxt "max_flow_acceleration label" msgid "Gradual flow max acceleration" -msgstr "Gradual flow max acceleration" +msgstr "" msgctxt "layer_0_max_flow_acceleration label" msgid "Initial layer max flow acceleration" -msgstr "Initial layer max flow acceleration" +msgstr "" msgctxt "max_flow_acceleration description" msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximum acceleration for gradual flow changes" +msgstr "" msgctxt "layer_0_max_flow_acceleration description" msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimum speed for gradual flow changes for the first layer" +msgstr "" msgctxt "reset_flow_duration label" msgid "Reset flow duration" -msgstr "Reset flow duration" +msgstr "" diff --git a/resources/i18n/zh_CN/gradual_flow_settings.def.json.po b/resources/i18n/zh_CN/gradual_flow_settings.def.json.po index 363b0994aa..2529ed73e4 100644 --- a/resources/i18n/zh_CN/gradual_flow_settings.def.json.po +++ b/resources/i18n/zh_CN/gradual_flow_settings.def.json.po @@ -15,40 +15,40 @@ msgstr "" msgctxt "gradual_flow_discretisation_step_size description" msgid "Duration of each step in the gradual flow change" -msgstr "Duration of each step in the gradual flow change" +msgstr "" msgctxt "gradual_flow_enabled description" msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" msgctxt "reset_flow_duration description" msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" msgctxt "gradual_flow_discretisation_step_size label" msgid "Gradual flow discretisation step size" -msgstr "Gradual flow discretisation step size" +msgstr "" msgctxt "gradual_flow_enabled label" msgid "Gradual flow enabled" -msgstr "Gradual flow enabled" +msgstr "" msgctxt "max_flow_acceleration label" msgid "Gradual flow max acceleration" -msgstr "Gradual flow max acceleration" +msgstr "" msgctxt "layer_0_max_flow_acceleration label" msgid "Initial layer max flow acceleration" -msgstr "Initial layer max flow acceleration" +msgstr "" msgctxt "max_flow_acceleration description" msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximum acceleration for gradual flow changes" +msgstr "" msgctxt "layer_0_max_flow_acceleration description" msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimum speed for gradual flow changes for the first layer" +msgstr "" msgctxt "reset_flow_duration label" msgid "Reset flow duration" -msgstr "Reset flow duration" +msgstr "" diff --git a/resources/i18n/zh_TW/gradual_flow_settings.def.json.po b/resources/i18n/zh_TW/gradual_flow_settings.def.json.po index 363b0994aa..2529ed73e4 100644 --- a/resources/i18n/zh_TW/gradual_flow_settings.def.json.po +++ b/resources/i18n/zh_TW/gradual_flow_settings.def.json.po @@ -15,40 +15,40 @@ msgstr "" msgctxt "gradual_flow_discretisation_step_size description" msgid "Duration of each step in the gradual flow change" -msgstr "Duration of each step in the gradual flow change" +msgstr "" msgctxt "gradual_flow_enabled description" msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" msgctxt "reset_flow_duration description" msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" msgctxt "gradual_flow_discretisation_step_size label" msgid "Gradual flow discretisation step size" -msgstr "Gradual flow discretisation step size" +msgstr "" msgctxt "gradual_flow_enabled label" msgid "Gradual flow enabled" -msgstr "Gradual flow enabled" +msgstr "" msgctxt "max_flow_acceleration label" msgid "Gradual flow max acceleration" -msgstr "Gradual flow max acceleration" +msgstr "" msgctxt "layer_0_max_flow_acceleration label" msgid "Initial layer max flow acceleration" -msgstr "Initial layer max flow acceleration" +msgstr "" msgctxt "max_flow_acceleration description" msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximum acceleration for gradual flow changes" +msgstr "" msgctxt "layer_0_max_flow_acceleration description" msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimum speed for gradual flow changes for the first layer" +msgstr "" msgctxt "reset_flow_duration label" msgid "Reset flow duration" -msgstr "Reset flow duration" +msgstr ""