From 14f7299a6c69a6b57fa5249ddc645249b417a0ea Mon Sep 17 00:00:00 2001
From: Ghostkeeper <ghost_keeper+github@hotmail.com>
Date: Fri, 1 Apr 2016 16:45:42 +0200
Subject: [PATCH] Update template files

Contributes to issue CURA-1190.
---
 resources/i18n/cura.pot            |    2 +-
 resources/i18n/fdmprinter.json.pot | 1174 +++++++++++++++++++++++++++-
 2 files changed, 1174 insertions(+), 2 deletions(-)

diff --git a/resources/i18n/cura.pot b/resources/i18n/cura.pot
index 3b0946f58f..d54d173ad3 100644
--- a/resources/i18n/cura.pot
+++ b/resources/i18n/cura.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2016-04-01 10:50+0200\n"
+"POT-Creation-Date: 2016-04-01 13:45+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
diff --git a/resources/i18n/fdmprinter.json.pot b/resources/i18n/fdmprinter.json.pot
index 7049db0f30..b7c6f07b46 100644
--- a/resources/i18n/fdmprinter.json.pot
+++ b/resources/i18n/fdmprinter.json.pot
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: http://github.com/ultimaker/uranium\n"
-"POT-Creation-Date: 2016-04-01 10:50+0000\n"
+"POT-Creation-Date: 2016-04-01 13:45+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -1242,3 +1242,1175 @@ msgstr ""
 msgctxt "support_angle label"
 msgid "Overhang Angle"
 msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_angle description"
+msgid ""
+"The minimum angle of overhangs for which support is added. At a value of 0° "
+"all overhangs are supported, 90° will not provide any support."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_pattern label"
+msgid "Support Pattern"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_pattern description"
+msgid ""
+"The pattern of the support structures of the print. The different options "
+"available result in sturdy or easy to remove support."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_pattern option lines"
+msgid "Lines"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_pattern option grid"
+msgid "Grid"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_pattern option triangles"
+msgid "Triangles"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_pattern option concentric"
+msgid "Concentric"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_pattern option zigzag"
+msgid "Zig Zag"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_connect_zigzags label"
+msgid "Connect ZigZags"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_connect_zigzags description"
+msgid ""
+"Connect the ZigZags. This will increase the strength of the zig zag support "
+"structure."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_infill_rate label"
+msgid "Support Density"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_infill_rate description"
+msgid ""
+"Adjusts the density of the support structure. A higher value results in "
+"better overhangs, but the supports are harder to remove."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_line_distance label"
+msgid "Support Line Distance"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_line_distance description"
+msgid ""
+"Distance between the printed support structure lines. This setting is "
+"calculated by the support density."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_xy_distance label"
+msgid "X/Y Distance"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_xy_distance description"
+msgid "Distance of the support structure from the print in the X/Y directions."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_z_distance label"
+msgid "Z Distance"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_z_distance description"
+msgid ""
+"Distance from the top/bottom of the support structure to the print. This gap "
+"provides clearance to remove the supports after the model is printed. This "
+"value is rounded down to a multiple of the layer height."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_top_distance label"
+msgid "Top Distance"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_top_distance description"
+msgid "Distance from the top of the support to the print."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_bottom_distance label"
+msgid "Bottom Distance"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_bottom_distance description"
+msgid "Distance from the print to the bottom of the support."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_bottom_stair_step_height label"
+msgid "Stair Step Height"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_bottom_stair_step_height description"
+msgid ""
+"The height of the steps of the stair-like bottom of support resting on the "
+"model. A low value makes the support harder to remove, but too high values "
+"can lead to unstable support structures."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_join_distance label"
+msgid "Join Distance"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_join_distance description"
+msgid ""
+"The maximum distance between support structures in the X/Y directions. When "
+"seperate structures are closer together than this value, the structures "
+"merge into one."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_offset label"
+msgid "Horizontal Expansion"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_offset description"
+msgid ""
+"Amount of offset applied to all support polygons in each layer. Positive "
+"values can smooth out the support areas and result in more sturdy support."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_area_smoothing label"
+msgid "Area Smoothing"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_area_smoothing description"
+msgid ""
+"Maximum distance in the X/Y directions of a line segment which is to be "
+"smoothed out. Ragged lines are introduced by the join distance and support "
+"bridge, which cause the machine to resonate. Smoothing the support areas "
+"won't cause them to break with the constraints, except it might change the "
+"overhang."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_roof_enable label"
+msgid "Enable Support Roof"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_roof_enable description"
+msgid ""
+"Generate a dense top skin at the top of the support on which the model is "
+"printed."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_roof_height label"
+msgid "Support Roof Thickness"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_roof_height description"
+msgid "The thickness of the support roofs."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_roof_density label"
+msgid "Support Roof Density"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_roof_density description"
+msgid ""
+"Adjusts the density of the roof of the support structure. A higher value "
+"results in better overhangs, but the supports are harder to remove."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_roof_line_distance label"
+msgid "Support Roof Line Distance"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_roof_line_distance description"
+msgid ""
+"Distance between the printed support roof lines. This setting is calculated "
+"by the support roof Density, but can be adjusted separately."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_roof_pattern label"
+msgid "Support Roof Pattern"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_roof_pattern description"
+msgid "The pattern with which the top of the support is printed."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_roof_pattern option lines"
+msgid "Lines"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_roof_pattern option grid"
+msgid "Grid"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_roof_pattern option triangles"
+msgid "Triangles"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_roof_pattern option concentric"
+msgid "Concentric"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_roof_pattern option zigzag"
+msgid "Zig Zag"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_conical_enabled label"
+msgid "Conical Support"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_conical_enabled description"
+msgid ""
+"Experimental feature: Make support areas smaller at the bottom than at the "
+"overhang."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_conical_angle label"
+msgid "Cone Angle"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_conical_angle description"
+msgid ""
+"The angle of the tilt of conical support. With 0 degrees being vertical, and "
+"90 degrees being horizontal. Smaller angles cause the support to be more "
+"sturdy, but consist of more material. Negative angles cause the base of the "
+"support to be wider than the top."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_conical_min_width label"
+msgid "Cone Minimal Width"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_conical_min_width description"
+msgid ""
+"Minimal width to which the base of the conical support area is reduced. "
+"Small widths can lead to unstable support structures."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_use_towers label"
+msgid "Use Towers"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_use_towers description"
+msgid ""
+"Use specialized towers to support tiny overhang areas. These towers have a "
+"larger diameter than the region they support. Near the overhang the towers' "
+"diameter decreases, forming a roof."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_tower_diameter label"
+msgid "Tower Diameter"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_tower_diameter description"
+msgid "The diameter of a special tower."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_minimal_diameter label"
+msgid "Minimum Diameter"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_minimal_diameter description"
+msgid ""
+"Minimum diameter in the X/Y directions of a small area which is to be "
+"supported by a specialized support tower."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_tower_roof_angle label"
+msgid "Tower Roof Angle"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "support_tower_roof_angle description"
+msgid ""
+"The angle of a rooftop of a tower. A higher value results in pointed tower "
+"roofs, a lower value results in flattened tower roofs."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "platform_adhesion label"
+msgid "Platform Adhesion"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "adhesion_type label"
+msgid "Type"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "adhesion_type description"
+msgid ""
+"Different options that help to improve both priming your extrusion and "
+"adhesion to the build plate. Brim adds a single layer flat area around the "
+"base of your object to prevent warping. Raft adds a thick grid with a roof "
+"below the object. Skirt is a line printed around the object, but not "
+"connected to the model."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "adhesion_type option skirt"
+msgid "Skirt"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "adhesion_type option brim"
+msgid "Brim"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "adhesion_type option raft"
+msgid "Raft"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "skirt_line_count label"
+msgid "Skirt Line Count"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "skirt_line_count description"
+msgid ""
+"Multiple skirt lines help to prime your extrusion better for small objects. "
+"Setting this to 0 will disable the skirt."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "skirt_gap label"
+msgid "Skirt Distance"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "skirt_gap description"
+msgid ""
+"The horizontal distance between the skirt and the first layer of the print.\n"
+"This is the minimum distance, multiple skirt lines will extend outwards from "
+"this distance."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "skirt_minimal_length label"
+msgid "Skirt Minimum Length"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "skirt_minimal_length description"
+msgid ""
+"The minimum length of the skirt. If this length is not reached by the skirt "
+"line count, more skirt lines will be added until the minimum length is "
+"reached. Note: If the line count is set to 0 this is ignored."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "brim_width label"
+msgid "Brim Width"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "brim_width description"
+msgid ""
+"The distance from the model to the outermost brim line. A larger brim "
+"enhances adhesion to the build plate, but also reduces the effective print "
+"area."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "brim_line_count label"
+msgid "Brim Line Count"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "brim_line_count description"
+msgid ""
+"The number of lines used for a brim. More brim lines enhance adhesion to the "
+"build plate, but also reduces the effective print area."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_margin label"
+msgid "Raft Extra Margin"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_margin description"
+msgid ""
+"If the raft is enabled, this is the extra raft area around the object which "
+"is also given a raft. Increasing this margin will create a stronger raft "
+"while using more material and leaving less area for your print."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_airgap label"
+msgid "Raft Air-gap"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_airgap description"
+msgid ""
+"The gap between the final raft layer and the first layer of the object. Only "
+"the first layer is raised by this amount to lower the bonding between the "
+"raft layer and the object. Makes it easier to peel off the raft."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_surface_layers label"
+msgid "Raft Top Layers"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_surface_layers description"
+msgid ""
+"The number of top layers on top of the 2nd raft layer. These are fully "
+"filled layers that the object sits on. 2 layers result in a smoother top "
+"surface than 1."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_surface_thickness label"
+msgid "Raft Top Layer Thickness"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_surface_thickness description"
+msgid "Layer thickness of the top raft layers."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_surface_line_width label"
+msgid "Raft Top Line Width"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_surface_line_width description"
+msgid ""
+"Width of the lines in the top surface of the raft. These can be thin lines "
+"so that the top of the raft becomes smooth."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_surface_line_spacing label"
+msgid "Raft Top Spacing"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_surface_line_spacing description"
+msgid ""
+"The distance between the raft lines for the top raft layers. The spacing "
+"should be equal to the line width, so that the surface is solid."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_interface_thickness label"
+msgid "Raft Middle Thickness"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_interface_thickness description"
+msgid "Layer thickness of the middle raft layer."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_interface_line_width label"
+msgid "Raft Middle Line Width"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_interface_line_width description"
+msgid ""
+"Width of the lines in the middle raft layer. Making the second layer extrude "
+"more causes the lines to stick to the bed."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_interface_line_spacing label"
+msgid "Raft Middle Spacing"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_interface_line_spacing description"
+msgid ""
+"The distance between the raft lines for the middle raft layer. The spacing "
+"of the middle should be quite wide, while being dense enough to support the "
+"top raft layers."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_base_thickness label"
+msgid "Raft Base Thickness"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_base_thickness description"
+msgid ""
+"Layer thickness of the base raft layer. This should be a thick layer which "
+"sticks firmly to the printer bed."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_base_line_width label"
+msgid "Raft Base Line Width"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_base_line_width description"
+msgid ""
+"Width of the lines in the base raft layer. These should be thick lines to "
+"assist in bed adhesion."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_base_line_spacing label"
+msgid "Raft Line Spacing"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_base_line_spacing description"
+msgid ""
+"The distance between the raft lines for the base raft layer. Wide spacing "
+"makes for easy removal of the raft from the build plate."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_speed label"
+msgid "Raft Print Speed"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_speed description"
+msgid "The speed at which the raft is printed."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_surface_speed label"
+msgid "Raft Surface Print Speed"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_surface_speed description"
+msgid ""
+"The speed at which the surface raft layers are printed. These should be "
+"printed a bit slower, so that the nozzle can slowly smooth out adjacent "
+"surface lines."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_interface_speed label"
+msgid "Raft Interface Print Speed"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_interface_speed description"
+msgid ""
+"The speed at which the interface raft layer is printed. This should be "
+"printed quite slowly, as the volume of material coming out of the nozzle is "
+"quite high."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_base_speed label"
+msgid "Raft Base Print Speed"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_base_speed description"
+msgid ""
+"The speed at which the base raft layer is printed. This should be printed "
+"quite slowly, as the volume of material coming out of the nozzle is quite "
+"high."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_fan_speed label"
+msgid "Raft Fan Speed"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_fan_speed description"
+msgid "The fan speed for the raft."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_surface_fan_speed label"
+msgid "Raft Surface Fan Speed"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_surface_fan_speed description"
+msgid "The fan speed for the surface raft layers."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_interface_fan_speed label"
+msgid "Raft Interface Fan Speed"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_interface_fan_speed description"
+msgid "The fan speed for the interface raft layer."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_base_fan_speed label"
+msgid "Raft Base Fan Speed"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "raft_base_fan_speed description"
+msgid "The fan speed for the base raft layer."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "meshfix label"
+msgid "Mesh Fixes"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "meshfix_union_all label"
+msgid "Union Overlapping Volumes"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "meshfix_union_all description"
+msgid ""
+"Ignore the internal geometry arising from overlapping volumes and print the "
+"volumes as one. This may cause internal cavities to disappear."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "meshfix_union_all_remove_holes label"
+msgid "Remove All Holes"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "meshfix_union_all_remove_holes description"
+msgid ""
+"Remove the holes in each layer and keep only the outside shape. This will "
+"ignore any invisible internal geometry. However, it also ignores layer holes "
+"which can be viewed from above or below."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "meshfix_extensive_stitching label"
+msgid "Extensive Stitching"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "meshfix_extensive_stitching description"
+msgid ""
+"Extensive stitching tries to stitch up open holes in the mesh by closing the "
+"hole with touching polygons. This option can introduce a lot of processing "
+"time."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "meshfix_keep_open_polygons label"
+msgid "Keep Disconnected Faces"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "meshfix_keep_open_polygons description"
+msgid ""
+"Normally Cura tries to stitch up small holes in the mesh and remove parts of "
+"a layer with big holes. Enabling this option keeps those parts which cannot "
+"be stitched. This option should be used as a last resort option when "
+"everything else fails to produce proper GCode."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "blackmagic label"
+msgid "Special Modes"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "print_sequence label"
+msgid "Print Sequence"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "print_sequence description"
+msgid ""
+"Whether to print all objects one layer at a time or to wait for one object "
+"to finish, before moving on to the next. One at a time mode is only possible "
+"if all models are separated in such a way that the whole print head can move "
+"in between and all models are lower than the distance between the nozzle and "
+"the X/Y axes."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "print_sequence option all_at_once"
+msgid "All at Once"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "print_sequence option one_at_a_time"
+msgid "One at a Time"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "magic_mesh_surface_mode label"
+msgid "Surface Mode"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "magic_mesh_surface_mode description"
+msgid ""
+"Print the surface instead of the volume. No infill, no top/bottom skin, just "
+"a single wall of which the middle coincides with the surface of the mesh. "
+"It's also possible to do both: print the insides of a closed volume as "
+"normal, but print all polygons not part of a closed volume as surface."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "magic_mesh_surface_mode option normal"
+msgid "Normal"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "magic_mesh_surface_mode option surface"
+msgid "Surface"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "magic_mesh_surface_mode option both"
+msgid "Both"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "magic_spiralize label"
+msgid "Spiralize Outer Contour"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "magic_spiralize description"
+msgid ""
+"Spiralize smooths out the Z move of the outer edge. This will create a "
+"steady Z increase over the whole print. This feature turns a solid object "
+"into a single walled print with a solid bottom. This feature used to be "
+"called Joris in older versions."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "experimental label"
+msgid "Experimental"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "magic_fuzzy_skin_enabled label"
+msgid "Fuzzy Skin"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "magic_fuzzy_skin_enabled description"
+msgid ""
+"Randomly jitter while printing the outer wall, so that the surface has a "
+"rough and fuzzy look."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "magic_fuzzy_skin_thickness label"
+msgid "Fuzzy Skin Thickness"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "magic_fuzzy_skin_thickness description"
+msgid ""
+"The width within which to jitter. It's advised to keep this below the outer "
+"wall width, since the inner walls are unaltered."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "magic_fuzzy_skin_point_density label"
+msgid "Fuzzy Skin Density"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "magic_fuzzy_skin_point_density description"
+msgid ""
+"The average density of points introduced on each polygon in a layer. Note "
+"that the original points of the polygon are discarded, so a low density "
+"results in a reduction of the resolution."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "magic_fuzzy_skin_point_dist label"
+msgid "Fuzzy Skin Point Distance"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "magic_fuzzy_skin_point_dist description"
+msgid ""
+"The average distance between the random points introduced on each line "
+"segment. Note that the original points of the polygon are discarded, so a "
+"high smoothness results in a reduction of the resolution. This value must be "
+"higher than half the Fuzzy Skin Thickness."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_enabled label"
+msgid "Wire Printing"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_enabled description"
+msgid ""
+"Print only the outside surface with a sparse webbed structure, printing 'in "
+"thin air'. This is realized by horizontally printing the contours of the "
+"model at given Z intervals which are connected via upward and diagonally "
+"downward lines."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_height label"
+msgid "WP Connection Height"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_height description"
+msgid ""
+"The height of the upward and diagonally downward lines between two "
+"horizontal parts. This determines the overall density of the net structure. "
+"Only applies to Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_roof_inset label"
+msgid "WP Roof Inset Distance"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_roof_inset description"
+msgid ""
+"The distance covered when making a connection from a roof outline inward. "
+"Only applies to Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_printspeed label"
+msgid "WP speed"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_printspeed description"
+msgid ""
+"Speed at which the nozzle moves when extruding material. Only applies to "
+"Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_printspeed_bottom label"
+msgid "WP Bottom Printing Speed"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_printspeed_bottom description"
+msgid ""
+"Speed of printing the first layer, which is the only layer touching the "
+"build platform. Only applies to Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_printspeed_up label"
+msgid "WP Upward Printing Speed"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_printspeed_up description"
+msgid ""
+"Speed of printing a line upward 'in thin air'. Only applies to Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_printspeed_down label"
+msgid "WP Downward Printing Speed"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_printspeed_down description"
+msgid ""
+"Speed of printing a line diagonally downward. Only applies to Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_printspeed_flat label"
+msgid "WP Horizontal Printing Speed"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_printspeed_flat description"
+msgid ""
+"Speed of printing the horizontal contours of the object. Only applies to "
+"Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_flow label"
+msgid "WP Flow"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_flow description"
+msgid ""
+"Flow compensation: the amount of material extruded is multiplied by this "
+"value. Only applies to Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_flow_connection label"
+msgid "WP Connection Flow"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_flow_connection description"
+msgid "Flow compensation when going up or down. Only applies to Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_flow_flat label"
+msgid "WP Flat Flow"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_flow_flat description"
+msgid ""
+"Flow compensation when printing flat lines. Only applies to Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_top_delay label"
+msgid "WP Top Delay"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_top_delay description"
+msgid ""
+"Delay time after an upward move, so that the upward line can harden. Only "
+"applies to Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_bottom_delay label"
+msgid "WP Bottom Delay"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_bottom_delay description"
+msgid "Delay time after a downward move. Only applies to Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_flat_delay label"
+msgid "WP Flat Delay"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_flat_delay description"
+msgid ""
+"Delay time between two horizontal segments. Introducing such a delay can "
+"cause better adhesion to previous layers at the connection points, while too "
+"long delays cause sagging. Only applies to Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_up_half_speed label"
+msgid "WP Ease Upward"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_up_half_speed description"
+msgid ""
+"Distance of an upward move which is extruded with half speed.\n"
+"This can cause better adhesion to previous layers, while not heating the "
+"material in those layers too much. Only applies to Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_top_jump label"
+msgid "WP Knot Size"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_top_jump description"
+msgid ""
+"Creates a small knot at the top of an upward line, so that the consecutive "
+"horizontal layer has a better chance to connect to it. Only applies to Wire "
+"Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_fall_down label"
+msgid "WP Fall Down"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_fall_down description"
+msgid ""
+"Distance with which the material falls down after an upward extrusion. This "
+"distance is compensated for. Only applies to Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_drag_along label"
+msgid "WP Drag along"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_drag_along description"
+msgid ""
+"Distance with which the material of an upward extrusion is dragged along "
+"with the diagonally downward extrusion. This distance is compensated for. "
+"Only applies to Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_strategy label"
+msgid "WP Strategy"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_strategy description"
+msgid ""
+"Strategy for making sure two consecutive layers connect at each connection "
+"point. Retraction lets the upward lines harden in the right position, but "
+"may cause filament grinding. A knot can be made at the end of an upward line "
+"to heighten the chance of connecting to it and to let the line cool; "
+"however, it may require slow printing speeds. Another strategy is to "
+"compensate for the sagging of the top of an upward line; however, the lines "
+"won't always fall down as predicted."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_strategy option compensate"
+msgid "Compensate"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_strategy option knot"
+msgid "Knot"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_strategy option retract"
+msgid "Retract"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_straight_before_down label"
+msgid "WP Straighten Downward Lines"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_straight_before_down description"
+msgid ""
+"Percentage of a diagonally downward line which is covered by a horizontal "
+"line piece. This can prevent sagging of the top most point of upward lines. "
+"Only applies to Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_roof_fall_down label"
+msgid "WP Roof Fall Down"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_roof_fall_down description"
+msgid ""
+"The distance which horizontal roof lines printed 'in thin air' fall down "
+"when being printed. This distance is compensated for. Only applies to Wire "
+"Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_roof_drag_along label"
+msgid "WP Roof Drag Along"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_roof_drag_along description"
+msgid ""
+"The distance of the end piece of an inward line which gets dragged along "
+"when going back to the outer outline of the roof. This distance is "
+"compensated for. Only applies to Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_roof_outer_delay label"
+msgid "WP Roof Outer Delay"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_roof_outer_delay description"
+msgid ""
+"Time spent at the outer perimeters of hole which is to become a roof. Longer "
+"times can ensure a better connection. Only applies to Wire Printing."
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_nozzle_clearance label"
+msgid "WP Nozzle Clearance"
+msgstr ""
+
+#: fdmprinter.json
+msgctxt "wireframe_nozzle_clearance description"
+msgid ""
+"Distance between the nozzle and horizontally downward lines. Larger "
+"clearance results in diagonally downward lines with a less steep angle, "
+"which in turn results in less upward connections with the next layer. Only "
+"applies to Wire Printing."
+msgstr ""