diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg
new file mode 100644
index 0000000000..fb88768bb6
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = high
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_engineering.inst.cfg
new file mode 100644
index 0000000000..e06ccbc3c6
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_abs
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_visual.inst.cfg
new file mode 100644
index 0000000000..b35aba42ee
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg
new file mode 100644
index 0000000000..967051c6b6
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_abs
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg
new file mode 100644
index 0000000000..c08c5e37c1
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..e5c66d6b88
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_quick.inst.cfg
new file mode 100644
index 0000000000..462f061fb8
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_quick.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =2 * line_width
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_visual.inst.cfg
new file mode 100644
index 0000000000..a2387b9907
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_engineering.inst.cfg
new file mode 100644
index 0000000000..0b2c1c3a96
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_petg
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg
new file mode 100644
index 0000000000..9bf56f69a2
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_petg
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..698fa97fc8
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_quick.inst.cfg
new file mode 100644
index 0000000000..8a1e6beac0
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_quick.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =2 * line_width
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_visual.inst.cfg
new file mode 100644
index 0000000000..7d6dcb30bf
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg
new file mode 100644
index 0000000000..63e20e56bd
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_pla
+quality_type = high
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_engineering.inst.cfg
new file mode 100644
index 0000000000..031ab34fa2
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_pla
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_visual.inst.cfg
new file mode 100644
index 0000000000..875b369cae
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_pla
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg
new file mode 100644
index 0000000000..b65a22fbdc
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_pla
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg
new file mode 100644
index 0000000000..a90a1b971d
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_pla
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..1cd8170e8f
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_quick.inst.cfg
new file mode 100644
index 0000000000..46fae84147
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_quick.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =2 * line_width
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_visual.inst.cfg
new file mode 100644
index 0000000000..5314f1fc02
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm_quick.inst.cfg
new file mode 100644
index 0000000000..45eb00c35f
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm_quick.inst.cfg
@@ -0,0 +1,30 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+is_experimental = True
+material = ultimaker_pla
+quality_type = verydraft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =2 * line_width
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg
new file mode 100644
index 0000000000..e2997ae696
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_tough_pla
+quality_type = high
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg
new file mode 100644
index 0000000000..f5f5a33ca7
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_tough_pla
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg
new file mode 100644
index 0000000000..2e6749b72a
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_tough_pla
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg
new file mode 100644
index 0000000000..a57cbf0af0
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_tough_pla
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg
new file mode 100644
index 0000000000..48ce65c800
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_tough_pla
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..2c2efb74ac
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg
new file mode 100644
index 0000000000..384754b8c2
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =2 * line_width
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg
new file mode 100644
index 0000000000..c1daf2b24f
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg
new file mode 100644
index 0000000000..fc17df4b34
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg
@@ -0,0 +1,30 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+is_experimental = True
+material = ultimaker_tough_pla
+quality_type = verydraft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =2 * line_width
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..60413405bb
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_quick.inst.cfg
new file mode 100644
index 0000000000..edb9c3f437
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_quick.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_visual.inst.cfg
new file mode 100644
index 0000000000..905cba2365
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..5db19be11f
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_quick.inst.cfg
new file mode 100644
index 0000000000..de7f5a944c
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_quick.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_visual.inst.cfg
new file mode 100644
index 0000000000..9fc9683573
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..5361dfeb62
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_quick.inst.cfg
new file mode 100644
index 0000000000..01a7dbbde5
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_quick.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_visual.inst.cfg
new file mode 100644
index 0000000000..c0dc288773
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..c4cad5993d
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg
new file mode 100644
index 0000000000..1f449035b6
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg
new file mode 100644
index 0000000000..84f9fc86ee
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg
new file mode 100644
index 0000000000..3866a4593a
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = high
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_engineering.inst.cfg
new file mode 100644
index 0000000000..908186790e
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s5
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_abs
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_visual.inst.cfg
new file mode 100644
index 0000000000..5354e3b326
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg
new file mode 100644
index 0000000000..b5834b5757
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s5
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_abs
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg
new file mode 100644
index 0000000000..63b0273ba5
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..c8ead2040c
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s5
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_quick.inst.cfg
new file mode 100644
index 0000000000..cf808f3f39
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_quick.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =2 * line_width
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_visual.inst.cfg
new file mode 100644
index 0000000000..c369f8f95d
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_engineering.inst.cfg
new file mode 100644
index 0000000000..b0057d80ed
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s5
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_petg
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_engineering.inst.cfg
new file mode 100644
index 0000000000..00c264aa32
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_engineering.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s5
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_petg
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..da575d938f
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s5
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_quick.inst.cfg
new file mode 100644
index 0000000000..53751b9d9c
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_quick.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =2 * line_width
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_visual.inst.cfg
new file mode 100644
index 0000000000..6453c0294c
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg
new file mode 100644
index 0000000000..0bb1797b46
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_pla
+quality_type = high
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_engineering.inst.cfg
new file mode 100644
index 0000000000..446f68db01
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s5
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_pla
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_visual.inst.cfg
new file mode 100644
index 0000000000..8a798c6ee1
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_pla
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg
new file mode 100644
index 0000000000..0ab18817e0
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s5
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_pla
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg
new file mode 100644
index 0000000000..f6b7800386
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_pla
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..248fee213c
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s5
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_quick.inst.cfg
new file mode 100644
index 0000000000..1deecdd454
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_quick.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =2 * line_width
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_visual.inst.cfg
new file mode 100644
index 0000000000..b44282bf95
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm_quick.inst.cfg
new file mode 100644
index 0000000000..222eac8a21
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm_quick.inst.cfg
@@ -0,0 +1,30 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+is_experimental = True
+material = ultimaker_pla
+quality_type = verydraft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =2 * line_width
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg
new file mode 100644
index 0000000000..b4516e44dd
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_tough_pla
+quality_type = high
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg
new file mode 100644
index 0000000000..dd54779d5d
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s5
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_tough_pla
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg
new file mode 100644
index 0000000000..6163d28bd4
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_tough_pla
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg
new file mode 100644
index 0000000000..5c78ea044d
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s5
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_tough_pla
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg
new file mode 100644
index 0000000000..5f73432e1c
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_tough_pla
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..aea6b01bff
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s5
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg
new file mode 100644
index 0000000000..d9c62b931c
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =2 * line_width
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg
new file mode 100644
index 0000000000..d8337b9de6
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg
new file mode 100644
index 0000000000..78998242ad
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg
@@ -0,0 +1,30 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+is_experimental = True
+material = ultimaker_tough_pla
+quality_type = verydraft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =2 * line_width
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..8281aefcf0
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s5
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_quick.inst.cfg
new file mode 100644
index 0000000000..5a02c7951c
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_quick.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_visual.inst.cfg
new file mode 100644
index 0000000000..92dc5468d0
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..ed5a152040
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s5
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_quick.inst.cfg
new file mode 100644
index 0000000000..6174e1d6e6
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_quick.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_visual.inst.cfg
new file mode 100644
index 0000000000..ff4f7d9444
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..9e15b423a2
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s5
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_quick.inst.cfg
new file mode 100644
index 0000000000..8e9de05ece
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_quick.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_visual.inst.cfg
new file mode 100644
index 0000000000..c3d82189e6
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..bf180f24e3
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s5
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg
new file mode 100644
index 0000000000..5bef26d0c8
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_print = 4000
+acceleration_wall = 3000
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = = 4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg
new file mode 100644
index 0000000000..ea42d4e8fc
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s5
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_infill = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg
new file mode 100644
index 0000000000..761ee98519
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg
@@ -0,0 +1,20 @@
+[general]
+definition = ultimaker_s3
+name = Fine
+version = 4
+
+[metadata]
+material = ultimaker_abs
+quality_type = normal
+setting_version = 22
+type = quality
+variant = AA 0.25
+weight = 0
+
+[values]
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg
new file mode 100644
index 0000000000..1a8de2bc0f
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg
@@ -0,0 +1,23 @@
+[general]
+definition = ultimaker_s3
+name = Fine
+version = 4
+
+[metadata]
+material = ultimaker_petg
+quality_type = normal
+setting_version = 22
+type = quality
+variant = AA 0.25
+weight = 0
+
+[values]
+material_print_temperature = =default_material_print_temperature - 5
+speed_infill = =math.ceil(speed_print * 40 / 55)
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = 0.8
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg
new file mode 100644
index 0000000000..4d8c8c7d60
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg
@@ -0,0 +1,32 @@
+[general]
+definition = ultimaker_s3
+name = Fine
+version = 4
+
+[metadata]
+material = ultimaker_pla
+quality_type = normal
+setting_version = 22
+type = quality
+variant = AA 0.25
+weight = 0
+
+[values]
+brim_width = 8
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
+material_print_temperature = 190
+retraction_hop = 0.2
+speed_print = 30
+speed_wall = =math.ceil(speed_print * 25 / 30)
+speed_wall_0 = =math.ceil(speed_print * 20 / 30)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = 0.72
+travel_avoid_distance = 0.4
+wall_0_inset = 0.015
+wall_0_wipe_dist = 0.25
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg
new file mode 100644
index 0000000000..13a5ab0a9c
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+definition = ultimaker_s3
+name = Fine
+version = 4
+
+[metadata]
+material = ultimaker_tough_pla
+quality_type = normal
+setting_version = 22
+type = quality
+variant = AA 0.25
+weight = 0
+
+[values]
+brim_width = 8
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
+material_print_temperature = =default_material_print_temperature - 15
+speed_print = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 30)
+speed_wall = =math.ceil(speed_print * 25 / 30)
+speed_wall_0 = =math.ceil(speed_print * 20 / 30)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = 0.72
+wall_0_inset = 0.015
+wall_0_wipe_dist = 0.25
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.3mm.inst.cfg
new file mode 100644
index 0000000000..e908d2de88
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.3mm.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = generic_abs
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -3
+
+[values]
+machine_nozzle_heat_up_speed = 1.5
+material_final_print_temperature = =material_print_temperature - 20
+prime_tower_enable = False
+raft_airgap = 0.15
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.3mm.inst.cfg
new file mode 100644
index 0000000000..95aa7481ec
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.3mm.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+definition = ultimaker_s3
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = generic_petg
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -3
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg
new file mode 100644
index 0000000000..19b593834d
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s3
+name = Extra Fine
+version = 4
+
+[metadata]
+material = ultimaker_abs
+quality_type = high
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = 1
+
+[values]
+machine_nozzle_cool_down_speed = 0.8
+machine_nozzle_heat_up_speed = 1.5
+material_final_print_temperature = =material_print_temperature - 20
+material_print_temperature = =default_material_print_temperature + 5
+prime_tower_enable = False
+raft_airgap = 0.15
+speed_infill = =math.ceil(speed_print * 40 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_wall = =math.ceil(speed_print * 30 / 50)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg
new file mode 100644
index 0000000000..2cf10a09dd
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg
@@ -0,0 +1,75 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Normal
+version = 4
+
+[metadata]
+material = ultimaker_abs
+quality_type = fast
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -1
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,8
+material_max_flowrate = 20
+material_print_temperature = =default_material_print_temperature + 15
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.15
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg
new file mode 100644
index 0000000000..200524266b
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s3
+name = Fine
+version = 4
+
+[metadata]
+material = ultimaker_abs
+quality_type = normal
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = 0
+
+[values]
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_final_print_temperature = =material_print_temperature - 20
+material_print_temperature = =default_material_print_temperature + 10
+prime_tower_enable = False
+raft_airgap = 0.15
+speed_infill = =math.ceil(speed_print * 40 / 55)
+speed_print = 55
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+speed_wall = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg
new file mode 100644
index 0000000000..e44ec41bab
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg
@@ -0,0 +1,75 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -2
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,8
+material_max_flowrate = 20
+material_print_temperature = =default_material_print_temperature + 20
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.15
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg
new file mode 100644
index 0000000000..a0cbe2536f
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg
@@ -0,0 +1,77 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_abs
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -3
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,8
+material_max_flowrate = 20
+material_print_temperature = =default_material_print_temperature + 22
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.15
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg
new file mode 100644
index 0000000000..1b7919bd02
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s3
+name = Extra Fine
+version = 4
+
+[metadata]
+material = ultimaker_petg
+quality_type = high
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = 1
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_print_temperature = =default_material_print_temperature - 10
+speed_infill = =math.ceil(speed_print * 40 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_wall = =math.ceil(speed_print * 30 / 50)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg
new file mode 100644
index 0000000000..1b08a08ea5
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg
@@ -0,0 +1,73 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Normal
+version = 4
+
+[metadata]
+material = ultimaker_petg
+quality_type = fast
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -1
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,4
+machine_nozzle_heat_up_speed = 1,7
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 20
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg
new file mode 100644
index 0000000000..afa05aa2cf
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s3
+name = Fine
+version = 4
+
+[metadata]
+material = ultimaker_petg
+quality_type = normal
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = 0
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_print_temperature = =default_material_print_temperature - 5
+speed_infill = =math.ceil(speed_print * 45 / 55)
+speed_print = 55
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+speed_wall = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg
new file mode 100644
index 0000000000..da2548236c
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -2
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,4
+machine_nozzle_heat_up_speed = 1,7
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 20
+material_print_temperature = =default_material_print_temperature + 5
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg
new file mode 100644
index 0000000000..fdd9959f36
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg
@@ -0,0 +1,75 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_petg
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -3
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,4
+machine_nozzle_heat_up_speed = 1,7
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 20
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg
new file mode 100644
index 0000000000..2939389a3c
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s3
+name = Extra Fine
+version = 4
+
+[metadata]
+material = ultimaker_pla
+quality_type = high
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = 1
+
+[values]
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature - 5
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_prime_speed = =retraction_speed
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 35 / 50)
+speed_wall = =math.ceil(speed_print * 35 / 50)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = 1
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg
new file mode 100644
index 0000000000..98ea41e2c4
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Normal
+version = 4
+
+[metadata]
+material = ultimaker_pla
+quality_type = fast
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -1
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 12
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg
new file mode 100644
index 0000000000..2b430c1afb
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg
@@ -0,0 +1,25 @@
+[general]
+definition = ultimaker_s3
+name = Fine
+version = 4
+
+[metadata]
+material = ultimaker_pla
+quality_type = normal
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = 0
+
+[values]
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_prime_speed = =retraction_speed
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = 1
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg
new file mode 100644
index 0000000000..e8a50ee27e
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg
@@ -0,0 +1,75 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -2
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 12
+material_print_temperature = =default_material_print_temperature + 5
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg
new file mode 100644
index 0000000000..c9f511e9af
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg
@@ -0,0 +1,77 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_pla
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -3
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 12
+material_print_temperature = =default_material_print_temperature + 10
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg
new file mode 100644
index 0000000000..02a5085655
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s3
+name = Extra Fine
+version = 4
+
+[metadata]
+material = ultimaker_tough_pla
+quality_type = high
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = 1
+
+[values]
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature - 15
+prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = 1.2
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg
new file mode 100644
index 0000000000..2a2a91f5cd
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Normal
+version = 4
+
+[metadata]
+material = ultimaker_tough_pla
+quality_type = fast
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -1
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 14
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg
new file mode 100644
index 0000000000..11ef55bdaa
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s3
+name = Fine
+version = 4
+
+[metadata]
+material = ultimaker_tough_pla
+quality_type = normal
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = 0
+
+[values]
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature - 15
+prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = 1.2
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg
new file mode 100644
index 0000000000..0836d1240e
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg
@@ -0,0 +1,75 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -2
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 14
+material_print_temperature = =default_material_print_temperature + 5
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg
new file mode 100644
index 0000000000..e791a87cc7
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg
@@ -0,0 +1,77 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_tough_pla
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -3
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 14
+material_print_temperature = =default_material_print_temperature + 10
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg
new file mode 100644
index 0000000000..972d384c3b
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -2
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,8
+material_flow = 93
+material_max_flowrate = 22
+material_print_temperature = =default_material_print_temperature + 20
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.15
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg
new file mode 100644
index 0000000000..3dd3b012f7
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Extra Fast
+version = 4
+
+[metadata]
+material = ultimaker_abs
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -3
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,8
+material_flow = 93
+material_max_flowrate = 22
+material_print_temperature = =default_material_print_temperature + 22
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.15
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 75
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/75))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg
new file mode 100644
index 0000000000..39d28b29cb
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Sprint
+version = 4
+
+[metadata]
+material = ultimaker_abs
+quality_type = superdraft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,8
+material_flow = 93
+material_max_flowrate = 22
+material_print_temperature = =default_material_print_temperature + 25
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.15
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/50))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg
new file mode 100644
index 0000000000..1cd23d77a1
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg
@@ -0,0 +1,73 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -2
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,4
+machine_nozzle_heat_up_speed = 1,7
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 23
+material_print_temperature = =default_material_print_temperature - 5
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = True
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg
new file mode 100644
index 0000000000..f4eb15bdfb
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg
@@ -0,0 +1,73 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Extra Fast
+version = 4
+
+[metadata]
+material = ultimaker_petg
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -3
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,4
+machine_nozzle_heat_up_speed = 1,7
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 23
+material_print_temperature = =default_material_print_temperature - 5
+optimize_wall_printing_order = False
+prime_tower_enable = True
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 75
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/75))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg
new file mode 100644
index 0000000000..ed6a9dd3a6
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg
@@ -0,0 +1,73 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Sprint
+version = 4
+
+[metadata]
+material = ultimaker_petg
+quality_type = superdraft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,4
+machine_nozzle_heat_up_speed = 1,7
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 23
+material_print_temperature = =default_material_print_temperature - 5
+optimize_wall_printing_order = False
+prime_tower_enable = True
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/50))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg
new file mode 100644
index 0000000000..df2e17c1b5
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -2
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 15
+material_print_temperature = =default_material_print_temperature + 10
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg
new file mode 100644
index 0000000000..d0cc030bb2
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Extra Fast
+version = 4
+
+[metadata]
+material = ultimaker_pla
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -3
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 15
+material_print_temperature = =default_material_print_temperature + 10
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 65
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/65))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg
new file mode 100644
index 0000000000..00c40d800a
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Sprint
+version = 4
+
+[metadata]
+material = ultimaker_pla
+quality_type = superdraft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 15
+material_print_temperature = =default_material_print_temperature + 15
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 45
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/45))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg
new file mode 100644
index 0000000000..5f041eae79
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -2
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 17
+material_print_temperature = =default_material_print_temperature + 10
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg
new file mode 100644
index 0000000000..11f89d3c72
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Extra Fast
+version = 4
+
+[metadata]
+material = ultimaker_tough_pla
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -3
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 17
+material_print_temperature = =default_material_print_temperature + 10
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 65
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/65))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg
new file mode 100644
index 0000000000..6e9d2b803e
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s3
+name = Sprint
+version = 4
+
+[metadata]
+material = ultimaker_tough_pla
+quality_type = superdraft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 17
+material_print_temperature = =default_material_print_temperature + 15
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 45
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/45))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg
new file mode 100644
index 0000000000..300e2ebaed
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s3
+name = Normal - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_pla
+quality_type = fast
+setting_version = 22
+type = quality
+variant = CC 0.4
+weight = -1
+
+[values]
+gradual_infill_step_height = =3 * layer_height
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature + 10
+prime_tower_enable = True
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+speed_wall_x = =speed_wall
+support_angle = 70
+top_bottom_thickness = =layer_height * 4
+
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg
new file mode 100644
index 0000000000..84040ede4e
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s3
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = quality
+variant = CC 0.4
+weight = -2
+
+[values]
+gradual_infill_step_height = =3 * layer_height
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature + 10
+prime_tower_enable = True
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+speed_wall_x = =speed_wall
+support_angle = 70
+top_bottom_thickness = =layer_height * 4
+
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg
new file mode 100644
index 0000000000..e7b72d6cd0
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s3
+name = Normal - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_pla
+quality_type = fast
+setting_version = 22
+type = quality
+variant = CC 0.6
+weight = -1
+
+[values]
+gradual_infill_step_height = =3 * layer_height
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature + 10
+prime_tower_enable = True
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+speed_wall_x = =speed_wall
+support_angle = 70
+top_bottom_thickness = =layer_height * 4
+
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg
new file mode 100644
index 0000000000..38c857de5e
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s3
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = quality
+variant = CC 0.6
+weight = -2
+
+[values]
+gradual_infill_step_height = =3 * layer_height
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature + 10
+prime_tower_enable = True
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+speed_wall_x = =speed_wall
+support_angle = 70
+top_bottom_thickness = =layer_height * 4
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg
new file mode 100644
index 0000000000..e4b42e7587
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg
@@ -0,0 +1,20 @@
+[general]
+definition = ultimaker_s5
+name = Fine
+version = 4
+
+[metadata]
+material = ultimaker_abs
+quality_type = normal
+setting_version = 22
+type = quality
+variant = AA 0.25
+weight = 0
+
+[values]
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg
new file mode 100644
index 0000000000..42f2bf5d16
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg
@@ -0,0 +1,23 @@
+[general]
+definition = ultimaker_s5
+name = Fine
+version = 4
+
+[metadata]
+material = ultimaker_petg
+quality_type = normal
+setting_version = 22
+type = quality
+variant = AA 0.25
+weight = 0
+
+[values]
+material_print_temperature = =default_material_print_temperature - 5
+speed_infill = =math.ceil(speed_print * 40 / 55)
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = 0.8
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg
new file mode 100644
index 0000000000..e282ec5eab
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg
@@ -0,0 +1,32 @@
+[general]
+definition = ultimaker_s5
+name = Fine
+version = 4
+
+[metadata]
+material = ultimaker_pla
+quality_type = normal
+setting_version = 22
+type = quality
+variant = AA 0.25
+weight = 0
+
+[values]
+brim_width = 8
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
+material_print_temperature = 190
+retraction_hop = 0.2
+speed_print = 30
+speed_wall = =math.ceil(speed_print * 25 / 30)
+speed_wall_0 = =math.ceil(speed_print * 20 / 30)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = 0.72
+travel_avoid_distance = 0.4
+wall_0_inset = 0.015
+wall_0_wipe_dist = 0.25
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-tough-pla_0.1mm.inst.cfg
new file mode 100644
index 0000000000..7eb277b007
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-tough-pla_0.1mm.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+definition = ultimaker_s5
+name = Fine
+version = 4
+
+[metadata]
+material = ultimaker_tough_pla
+quality_type = normal
+setting_version = 22
+type = quality
+variant = AA 0.25
+weight = 0
+
+[values]
+brim_width = 8
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
+material_print_temperature = =default_material_print_temperature - 15
+speed_print = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 30)
+speed_wall = =math.ceil(speed_print * 25 / 30)
+speed_wall_0 = =math.ceil(speed_print * 20 / 30)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = 0.72
+wall_0_inset = 0.015
+wall_0_wipe_dist = 0.25
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.3mm.inst.cfg
new file mode 100644
index 0000000000..6063b995cd
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.3mm.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s5
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = generic_abs
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -3
+
+[values]
+machine_nozzle_heat_up_speed = 1.5
+material_final_print_temperature = =material_print_temperature - 20
+prime_tower_enable = False
+raft_airgap = 0.15
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.3mm.inst.cfg
new file mode 100644
index 0000000000..1b502797ab
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.3mm.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+definition = ultimaker_s5
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = generic_petg
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -3
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg
new file mode 100644
index 0000000000..eeabba9298
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s5
+name = Extra Fine
+version = 4
+
+[metadata]
+material = ultimaker_abs
+quality_type = high
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = 1
+
+[values]
+machine_nozzle_cool_down_speed = 0.8
+machine_nozzle_heat_up_speed = 1.5
+material_final_print_temperature = =material_print_temperature - 20
+material_print_temperature = =default_material_print_temperature + 5
+prime_tower_enable = False
+raft_airgap = 0.15
+speed_infill = =math.ceil(speed_print * 40 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_wall = =math.ceil(speed_print * 30 / 50)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg
new file mode 100644
index 0000000000..53e5322ce2
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg
@@ -0,0 +1,75 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Normal
+version = 4
+
+[metadata]
+material = ultimaker_abs
+quality_type = fast
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -1
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,8
+material_max_flowrate = 20
+material_print_temperature = =default_material_print_temperature + 15
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.15
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg
new file mode 100644
index 0000000000..510e761bbe
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s5
+name = Fine
+version = 4
+
+[metadata]
+material = ultimaker_abs
+quality_type = normal
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = 0
+
+[values]
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_final_print_temperature = =material_print_temperature - 20
+material_print_temperature = =default_material_print_temperature + 10
+prime_tower_enable = False
+raft_airgap = 0.15
+speed_infill = =math.ceil(speed_print * 40 / 55)
+speed_print = 55
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+speed_wall = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg
new file mode 100644
index 0000000000..3fcecaf99c
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg
@@ -0,0 +1,75 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -2
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,8
+material_max_flowrate = 20
+material_print_temperature = =default_material_print_temperature + 20
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.15
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg
new file mode 100644
index 0000000000..5561e1cd85
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg
@@ -0,0 +1,77 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_abs
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -3
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,8
+material_max_flowrate = 20
+material_print_temperature = =default_material_print_temperature + 22
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.15
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm.inst.cfg
new file mode 100644
index 0000000000..9545d34977
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s5
+name = Extra Fine
+version = 4
+
+[metadata]
+material = ultimaker_petg
+quality_type = high
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = 1
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_print_temperature = =default_material_print_temperature - 10
+speed_infill = =math.ceil(speed_print * 40 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_wall = =math.ceil(speed_print * 30 / 50)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg
new file mode 100644
index 0000000000..4de3a9fa2b
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg
@@ -0,0 +1,73 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Normal
+version = 4
+
+[metadata]
+material = ultimaker_petg
+quality_type = fast
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -1
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,4
+machine_nozzle_heat_up_speed = 1,7
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 20
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm.inst.cfg
new file mode 100644
index 0000000000..4a20bd76b3
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s5
+name = Fine
+version = 4
+
+[metadata]
+material = ultimaker_petg
+quality_type = normal
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = 0
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_print_temperature = =default_material_print_temperature - 5
+speed_infill = =math.ceil(speed_print * 45 / 55)
+speed_print = 55
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+speed_wall = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg
new file mode 100644
index 0000000000..b3d8b6addd
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -2
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,4
+machine_nozzle_heat_up_speed = 1,7
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 20
+material_print_temperature = =default_material_print_temperature + 5
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg
new file mode 100644
index 0000000000..6c8575ba16
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg
@@ -0,0 +1,75 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_petg
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -3
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,4
+machine_nozzle_heat_up_speed = 1,7
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 20
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg
new file mode 100644
index 0000000000..c2bb123d04
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s5
+name = Extra Fine
+version = 4
+
+[metadata]
+material = ultimaker_pla
+quality_type = high
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = 1
+
+[values]
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature - 5
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_prime_speed = =retraction_speed
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 35 / 50)
+speed_wall = =math.ceil(speed_print * 35 / 50)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = 1
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg
new file mode 100644
index 0000000000..82098572ed
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Normal
+version = 4
+
+[metadata]
+material = ultimaker_pla
+quality_type = fast
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -1
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 12
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg
new file mode 100644
index 0000000000..1e2820f565
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg
@@ -0,0 +1,25 @@
+[general]
+definition = ultimaker_s5
+name = Fine
+version = 4
+
+[metadata]
+material = ultimaker_pla
+quality_type = normal
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = 0
+
+[values]
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_prime_speed = =retraction_speed
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = 1
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg
new file mode 100644
index 0000000000..846237fd3e
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg
@@ -0,0 +1,75 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -2
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 12
+material_print_temperature = =default_material_print_temperature + 5
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg
new file mode 100644
index 0000000000..e834419bdc
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg
@@ -0,0 +1,77 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_pla
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -3
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 12
+material_print_temperature = =default_material_print_temperature + 10
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg
new file mode 100644
index 0000000000..d195d3c40f
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s5
+name = Extra Fine
+version = 4
+
+[metadata]
+material = ultimaker_tough_pla
+quality_type = high
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = 1
+
+[values]
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature - 15
+prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = 1.2
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg
new file mode 100644
index 0000000000..7c18328639
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Normal
+version = 4
+
+[metadata]
+material = ultimaker_tough_pla
+quality_type = fast
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -1
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 14
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg
new file mode 100644
index 0000000000..38b2142353
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s5
+name = Fine
+version = 4
+
+[metadata]
+material = ultimaker_tough_pla
+quality_type = normal
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = 0
+
+[values]
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature - 15
+prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = 1.2
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg
new file mode 100644
index 0000000000..979e13857b
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg
@@ -0,0 +1,75 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -2
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 14
+material_print_temperature = =default_material_print_temperature + 5
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg
new file mode 100644
index 0000000000..c6a1b3bcba
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg
@@ -0,0 +1,77 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_tough_pla
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.4
+weight = -3
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_max_flowrate = 14
+material_print_temperature = =default_material_print_temperature + 10
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_structure = tree
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg
new file mode 100644
index 0000000000..2631bf1d47
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -2
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,8
+material_flow = 93
+material_max_flowrate = 22
+material_print_temperature = =default_material_print_temperature + 20
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.15
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg
new file mode 100644
index 0000000000..ffea1020b4
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Extra Fast
+version = 4
+
+[metadata]
+material = ultimaker_abs
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -3
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,8
+material_flow = 93
+material_max_flowrate = 22
+material_print_temperature = =default_material_print_temperature + 22
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.15
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 75
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/75))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg
new file mode 100644
index 0000000000..4b367f630b
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Sprint
+version = 4
+
+[metadata]
+material = ultimaker_abs
+quality_type = superdraft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,8
+material_flow = 93
+material_max_flowrate = 22
+material_print_temperature = =default_material_print_temperature + 25
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.15
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/50))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg
new file mode 100644
index 0000000000..ab0b75ce52
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg
@@ -0,0 +1,73 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -2
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,4
+machine_nozzle_heat_up_speed = 1,7
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 23
+material_print_temperature = =default_material_print_temperature - 5
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = True
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg
new file mode 100644
index 0000000000..715cfa0771
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg
@@ -0,0 +1,73 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Extra Fast
+version = 4
+
+[metadata]
+material = ultimaker_petg
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -3
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,4
+machine_nozzle_heat_up_speed = 1,7
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 23
+material_print_temperature = =default_material_print_temperature - 5
+optimize_wall_printing_order = False
+prime_tower_enable = True
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 75
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/75))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg
new file mode 100644
index 0000000000..65b2340c76
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg
@@ -0,0 +1,73 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Sprint
+version = 4
+
+[metadata]
+material = ultimaker_petg
+quality_type = superdraft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,4
+machine_nozzle_heat_up_speed = 1,7
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 23
+material_print_temperature = =default_material_print_temperature - 5
+optimize_wall_printing_order = False
+prime_tower_enable = True
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/50))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg
new file mode 100644
index 0000000000..33adecd9b7
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -2
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 15
+material_print_temperature = =default_material_print_temperature + 10
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg
new file mode 100644
index 0000000000..0a8b196a65
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Extra Fast
+version = 4
+
+[metadata]
+material = ultimaker_pla
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -3
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 15
+material_print_temperature = =default_material_print_temperature + 10
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 65
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/65))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg
new file mode 100644
index 0000000000..e7734de988
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Sprint
+version = 4
+
+[metadata]
+material = ultimaker_pla
+quality_type = superdraft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 15
+material_print_temperature = =default_material_print_temperature + 15
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 45
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/45))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg
new file mode 100644
index 0000000000..20e775abdc
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -2
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 17
+material_print_temperature = =default_material_print_temperature + 10
+meshfix_maximum_resolution = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/100))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg
new file mode 100644
index 0000000000..f08f5c4fdb
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Extra Fast
+version = 4
+
+[metadata]
+material = ultimaker_tough_pla
+quality_type = verydraft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -3
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 17
+material_print_temperature = =default_material_print_temperature + 10
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 65
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/65))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg
new file mode 100644
index 0000000000..524f9d2a44
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg
@@ -0,0 +1,74 @@
+
+
+
+[general]
+definition = ultimaker_s5
+name = Sprint
+version = 4
+
+[metadata]
+material = ultimaker_tough_pla
+quality_type = superdraft
+setting_version = 22
+type = quality
+variant = AA 0.8
+weight = -4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_print/2)
+machine_nozzle_cool_down_speed = 1,3
+machine_nozzle_heat_up_speed = 1,9
+material_extrusion_cool_down_speed = 0,7
+material_flow = 93
+material_max_flowrate = 17
+material_print_temperature = =default_material_print_temperature + 15
+optimize_wall_printing_order = False
+prime_tower_enable = True
+raft_airgap = 0.25
+retraction_amount = 4
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+skin_no_small_gaps_heuristic = True
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_layer_0 = =speed_roofing
+speed_print = 45
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(35/45))
+speed_wall_x = =speed_wall
+support_angle = 70
+support_interface_enable = False
+support_structure = tree
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
+
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg
new file mode 100644
index 0000000000..1204be4c15
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s5
+name = Normal - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_pla
+quality_type = fast
+setting_version = 22
+type = quality
+variant = CC 0.4
+weight = -1
+
+[values]
+gradual_infill_step_height = =3 * layer_height
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature + 10
+prime_tower_enable = True
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+speed_wall_x = =speed_wall
+support_angle = 70
+top_bottom_thickness = =layer_height * 4
+
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg
new file mode 100644
index 0000000000..6a7d52af4b
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s5
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = quality
+variant = CC 0.4
+weight = -2
+
+[values]
+gradual_infill_step_height = =3 * layer_height
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature + 10
+prime_tower_enable = True
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+speed_wall_x = =speed_wall
+support_angle = 70
+top_bottom_thickness = =layer_height * 4
+
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg
new file mode 100644
index 0000000000..5bf5d910e8
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s5
+name = Normal - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_pla
+quality_type = fast
+setting_version = 22
+type = quality
+variant = CC 0.6
+weight = -1
+
+[values]
+gradual_infill_step_height = =3 * layer_height
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature + 10
+prime_tower_enable = True
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+speed_wall_x = =speed_wall
+support_angle = 70
+top_bottom_thickness = =layer_height * 4
+
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg
new file mode 100644
index 0000000000..21407b6e66
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s5
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_pla
+quality_type = draft
+setting_version = 22
+type = quality
+variant = CC 0.6
+weight = -2
+
+[values]
+gradual_infill_step_height = =3 * layer_height
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature + 10
+prime_tower_enable = True
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+speed_wall_x = =speed_wall
+support_angle = 70
+top_bottom_thickness = =layer_height * 4
+