diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index 3f815fac3d..8c6318a698 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -29,11 +29,11 @@ jerk_print = 25 layer_height = 0.2 line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 10 +machine_nozzle_cool_down_speed = 0.5 +machine_nozzle_heat_up_speed = 2.5 +material_final_print_temperature = =material_print_temperature - 21 material_flow = 106 -material_initial_print_temperature = =material_print_temperature - 5 +material_initial_print_temperature = =material_print_temperature - 16 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 @@ -43,8 +43,8 @@ prime_tower_wipe_enabled = True retraction_count_max = 12 retraction_extra_prime_amount = 0.8 retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = False +retraction_hop = 1.5 +retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 @@ -61,7 +61,7 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 -travel_avoid_distance = 0.5 +travel_avoid_distance = 1.5 wall_0_inset = 0 wall_line_width_x = =line_width wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg index e45ec15dec..129135f6a1 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg @@ -29,11 +29,11 @@ jerk_print = 25 layer_height = 0.15 line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 10 +machine_nozzle_cool_down_speed = 0.5 +machine_nozzle_heat_up_speed = 2.5 +material_final_print_temperature = =material_print_temperature - 21 material_flow = 106 -material_initial_print_temperature = =material_print_temperature - 5 +material_initial_print_temperature = =material_print_temperature - 16 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 @@ -44,8 +44,8 @@ retraction_amount = 7 retraction_count_max = 12 retraction_extra_prime_amount = 0.8 retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = False +retraction_hop = 1.5 +retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 @@ -62,7 +62,7 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 -travel_avoid_distance = 0.5 +travel_avoid_distance = 1.5 wall_0_inset = 0 wall_line_width_x = =line_width wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg index 707e535947..eb71f1ef3f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -28,11 +28,11 @@ jerk_enabled = True jerk_print = 25 line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 10 +machine_nozzle_cool_down_speed = 0.5 +machine_nozzle_heat_up_speed = 2.5 +material_final_print_temperature = =material_print_temperature - 21 material_flow = 106 -material_initial_print_temperature = =material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 16 material_print_temperature_layer_0 = =default_material_print_temperature material_standby_temperature = 100 multiple_mesh_overlap = 0 @@ -41,8 +41,8 @@ prime_tower_wipe_enabled = True retraction_count_max = 12 retraction_extra_prime_amount = 0.8 retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = False +retraction_hop = 1.5 +retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 @@ -59,7 +59,7 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 -travel_avoid_distance = 0.5 +travel_avoid_distance = 1.5 wall_0_inset = 0 wall_line_width_x = =line_width wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index 41ac43a840..33f1b7952a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -25,8 +25,12 @@ infill_sparse_density = 80 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) jerk_support = =math.ceil(jerk_print * 25 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +machine_nozzle_cool_down_speed = 0.5 +machine_nozzle_heat_up_speed = 2.5 material_bed_temperature_layer_0 = 0 +material_final_print_temperature = =material_print_temperature - 21 material_flow = 105 +material_initial_print_temperature = =material_print_temperature - 16 material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 @@ -37,8 +41,8 @@ prime_tower_wall_thickness = =prime_tower_line_width * 2 retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 -retraction_hop = 0.5 -retraction_hop_enabled = False +retraction_hop = 1.5 +retraction_hop_enabled = True retraction_hop_only_when_collides = False retraction_min_travel = 0.8 retraction_prime_speed = 15 @@ -56,7 +60,7 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 -travel_avoid_distance = 0.5 +travel_avoid_distance = 1.5 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index 66c0281b78..42a819ec82 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -26,8 +26,12 @@ jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) jerk_support = =math.ceil(jerk_print * 25 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) layer_height = 0.4 +machine_nozzle_cool_down_speed = 0.5 +machine_nozzle_heat_up_speed = 2.5 material_bed_temperature_layer_0 = 0 +material_final_print_temperature = =material_print_temperature - 21 material_flow = 105 +material_initial_print_temperature = =material_print_temperature - 16 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 @@ -38,8 +42,8 @@ prime_tower_wall_thickness = =prime_tower_line_width * 2 retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 -retraction_hop = 0.5 -retraction_hop_enabled = False +retraction_hop = 1.5 +retraction_hop_enabled = True retraction_hop_only_when_collides = False retraction_min_travel = 0.8 retraction_prime_speed = 15 @@ -57,7 +61,7 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 -travel_avoid_distance = 0.5 +travel_avoid_distance = 1.5 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index 1274f43eea..dd3cc8fa68 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -26,8 +26,12 @@ jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) jerk_support = =math.ceil(jerk_print * 25 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) layer_height = 0.3 +machine_nozzle_cool_down_speed = 0.5 +machine_nozzle_heat_up_speed = 2.5 material_bed_temperature_layer_0 = 0 +material_final_print_temperature = =material_print_temperature - 21 material_flow = 105 +material_initial_print_temperature = =material_print_temperature - 16 material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 @@ -37,8 +41,8 @@ prime_tower_wall_thickness = =prime_tower_line_width * 2 retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 -retraction_hop = 0.5 -retraction_hop_enabled = False +retraction_hop = 1.5 +retraction_hop_enabled = True retraction_hop_only_when_collides = False retraction_min_travel = 0.8 retraction_prime_speed = 15 @@ -56,7 +60,7 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 -travel_avoid_distance = 0.5 +travel_avoid_distance = 1.5 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)