diff --git a/resources/definitions/bq_hephestos.def.json b/resources/definitions/bq_hephestos.def.json
new file mode 100644
index 0000000000..9958ef2b86
--- /dev/null
+++ b/resources/definitions/bq_hephestos.def.json
@@ -0,0 +1,89 @@
+{
+    "id": "bq_hephestos",
+    "name": "BQ Prusa i3 Hephestos",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata":
+    {
+        "author": "BQ",
+        "manufacturer": "BQ",
+        "category": "Other",
+        "file_formats": "text/x-gcode",
+        "platform": "bq_hephestos_platform.stl"
+    },
+
+    "settings": {
+        "machine_start_gcode": {
+            "value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z15.0 F1200          ;move Z to position 15.0 mm\nG92 E0                  ;zero the extruded length\nG1 E20 F200             ;extrude 20mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F7200                ;set feedrate to 120 mm/sec\n; -- end of START GCODE --"
+        },
+        "machine_end_gcode": {
+            "value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nG91                     ;set to relative positioning\nG1 E-20 F300            ;retract the filament a bit to release some of the pressure\nG1 Z10                  ;move extruder up 10 mm\nG90                     ;set to absolute positioning\nG1 X0 Y180 F1200        ;expose the platform\nM84                     ;turn off steppers\n; -- end of END GCODE --"
+        },
+        "machine_width": {
+            "value": 215
+        },
+        "machine_depth": {
+            "value": 210
+        },
+        "machine_height": {
+            "value": 180
+        },
+        "machine_heated_bed": {
+            "value": false
+        },
+        "machine_center_is_zero": {
+            "value": false
+        },
+        "machine_gcode_flavor": {
+            "value": "RepRap"
+        },
+        "machine_platform_offset": {
+            "value": [0, -82, 0]
+        },
+        "layer_height": {
+            "value": 0.2
+        },
+        "layer_height_0": {
+            "value": 0.2
+        },
+        "wall_thickness": {
+            "value": 1.0
+        },
+        "top_bottom_thickness": {
+            "value": 1.0
+        },
+        "bottom_thickness": {
+            "value": 1.0
+        },
+        "material_print_temperature": {
+            "value": 220
+        },
+        "material_bed_temperature": {
+            "value": 0
+        },
+        "material_diameter": {
+            "value": 1.75
+        },
+        "speed_print": {
+            "value": 40.0
+        },
+        "speed_infill": {
+            "value": 40.0
+        },
+        "speed_wall": {
+            "value": 35.0
+        },
+        "speed_topbottom": {
+            "value": 35.0
+        },
+        "speed_travel": {
+            "value": 120.0
+        },
+        "speed_layer_0": {
+            "value": 20.0
+        },
+        "support_enable": {
+            "value": true
+        }
+    }
+}
\ No newline at end of file
diff --git a/resources/definitions/bq_hephestos_2.def.json b/resources/definitions/bq_hephestos_2.def.json
new file mode 100644
index 0000000000..2e084518ba
--- /dev/null
+++ b/resources/definitions/bq_hephestos_2.def.json
@@ -0,0 +1,117 @@
+{
+    "id": "bq_hephestos_2",
+    "version": 2,
+    "name": "BQ Hephestos 2",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "author": "BQ",
+        "manufacturer": "BQ",
+        "category": "Other",
+        "platform": "bq_hephestos_2_platform.stl",
+        "file_formats": "text/x-gcode"
+    },
+    "manufacturer": "BQ",
+    "author": "BQ",
+    "platform": "bq_hephestos_2_platform.stl",
+    "file_formats": "text/x-gcode",
+    "inherits": "fdmprinter.json",
+
+    "settings": {
+        "machine_start_gcode": {
+            "value": "; -- START GCODE --\nM800        ; Custom GCODE to fire start print procedure\n; -- end of START GCODE --"
+        },
+        "machine_end_gcode": {
+            "value": "; -- END GCODE --\nM801        ; Custom GCODE to fire end print procedure\n; -- end of END GCODE --"
+        },
+        "machine_width": {
+            "value": 210
+        },
+        "machine_depth": {
+            "value": 297
+        },
+        "machine_height": {
+            "value": 220
+        },
+        "machine_heated_bed": {
+            "value": false
+        },
+        "machine_center_is_zero": {
+            "value": false
+        },
+        "machine_gcode_flavor": {
+            "value": "RepRap"
+        },
+        "machine_platform_offset": {
+            "value": [6, 1320, 0]
+        },
+        "material_print_temperature": {
+            "value": 210.0
+        },
+        "material_bed_temperature": {
+            "value": 0
+        },
+        "material_diameter": {
+            "value": 1.75
+        },
+        "layer_height": {
+            "value": 0.2
+        },
+        "layer_height_0": {
+            "value": 0.2
+        },
+        "wall_line_count": {
+            "value": 3
+        },
+        "wall_thickness": {
+            "value": 1.2
+        },
+        "top_bottom_thickness": {
+            "value": 1.2
+        },
+        "infill_sparse_density": {
+            "value": 20.0
+        },
+        "infill_overlap": {
+            "value": 15.0
+        },
+        "speed_print": {
+            "value": 60.0
+        },
+        "speed_travel": {
+            "value": 160.0
+        },
+        "speed_layer_0": {
+            "value": 30.0
+        },
+        "speed_wall_x": {
+            "value": 35.0
+        },
+        "speed_wall_0": {
+            "value": 30.0
+        },
+        "speed_infill": {
+            "value": 80.0
+        },
+        "speed_topbottom": {
+            "value": 35.0
+        },
+        "skirt_speed": {
+            "value": 35.0
+        },
+        "skirt_line_count": {
+            "value": 4
+        },
+        "skirt_minimal_length": {
+            "value": 30.0
+        },
+        "skirt_gap": {
+            "value": 6.0
+        },
+        "cool_fan_full_at_height": {
+            "value": 0.4
+        },
+        "support_enable": {
+            "value": false
+        }
+    }
+}
diff --git a/resources/definitions/bq_hephestos_xl.def.json b/resources/definitions/bq_hephestos_xl.def.json
new file mode 100644
index 0000000000..0d4bc13ea1
--- /dev/null
+++ b/resources/definitions/bq_hephestos_xl.def.json
@@ -0,0 +1,88 @@
+{
+    "id": "bq_hephestos_xl",
+    "version": 2,
+    "name": "BQ Prusa i3 Hephestos XL",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "manufacturer": "BQ",
+        "author": "BQ",
+        "category": "Other",
+        "file_formats": "text/x-code",
+        "platform": "bq_hephestos_platform.stl"
+    },
+
+    "settings": {
+        "machine_start_gcode": {
+            "value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z15.0 F1200          ;move Z to position 15.0 mm\nG92 E0                  ;zero the extruded length\nG1 E20 F200             ;extrude 20mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F7200                ;set feedrate to 120 mm/sec\n; -- end of START GCODE --"
+        },
+        "machine_end_gcode": {
+            "value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nG91                     ;set to relative positioning\nG1 E-20 F300            ;retract the filament a bit to release some of the pressure\nG1 Z10                  ;move extruder up 10 mm\nG90                     ;set to absolute positioning\nG1 X0 Y180 F1200        ;expose the platform\nM84                     ;turn off steppers\n; -- end of END GCODE --"
+        },
+        "machine_width": {
+            "value": 200
+        },
+        "machine_depth": {
+            "value": 300
+        },
+        "machine_height": {
+            "value": 180
+        },
+        "machine_heated_bed": {
+            "value": false
+        },
+        "machine_center_is_zero": {
+            "value": false
+        },
+        "machine_gcode_flavor": {
+            "value": "RepRap"
+        },
+        "machine_platform_offset": {
+            "value": [0, -82, 0]
+        },
+        "layer_height": {
+            "value": 0.2
+        },
+        "layer_height_0": {
+            "value": 0.2
+        },
+        "wall_thickness": {
+            "value": 1.0
+        },
+        "top_bottom_thickness": {
+            "value": 1.0
+        },
+        "bottom_thickness": {
+            "value": 1.0
+        },
+        "material_print_temperature": {
+            "value": 220
+        },
+        "material_bed_temperature": {
+            "value": 0
+        },
+        "material_diameter": {
+            "value": 1.75
+        },
+        "speed_print": {
+            "value": 40.0
+        },
+        "speed_infill": {
+            "value": 40.0
+        },
+        "speed_wall": {
+            "value": 35.0
+        },
+        "speed_topbottom": {
+            "value": 35.0
+        },
+        "speed_travel": {
+            "value": 120.0
+        },
+        "speed_layer_0": {
+            "value": 20.0
+        },
+        "support_enable": {
+            "value": true
+        }
+    }
+}
\ No newline at end of file
diff --git a/resources/definitions/bq_witbox.def.json b/resources/definitions/bq_witbox.def.json
new file mode 100644
index 0000000000..dfa8eb5712
--- /dev/null
+++ b/resources/definitions/bq_witbox.def.json
@@ -0,0 +1,87 @@
+{
+    "id": "bq_witbox",
+    "version": 2,
+    "name": "BQ Witbox",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "author": "BQ",
+        "manufacturer": "BQ",
+        "category": "Other",
+        "file_formats": "text/x-gcode",
+        "platform": "bq_witbox_platform.stl"
+    },
+    "settings": {
+        "machine_start_gcode": {
+            "value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z15.0 F1200          ;move Z to position 15.0 mm\nG92 E0                  ;zero the extruded length\nG1 E20 F200             ;extrude 20mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F7200                ;set feedrate to 120 mm/sec\n; -- end of START GCODE --"
+        },
+        "machine_end_gcode": {
+            "value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nG91                     ;set to relative positioning\nG1 E-20 F300            ;retract the filament a bit to release some of the pressure\nG90                     ;set to absolute positioning\nG1 Z200                 ;move the platform to the bottom\nG28 X0 Y0               ;move to the X/Y origin (Home)\nM84                     ;turn off steppers\n; -- end of END GCODE --"
+        },
+        "machine_width": {
+            "value": 297
+        },
+        "machine_depth": {
+            "value": 210
+        },
+        "machine_height": {
+            "value": 200
+        },
+        "machine_heated_bed": {
+            "value": false
+        },
+        "machine_center_is_zero": {
+            "value": false
+        },
+        "machine_gcode_flavor": {
+            "value": "RepRap"
+        },
+        "machine_platform_offset": {
+            "value": [0, -145, -38]
+        },
+        "layer_height": {
+            "value": 0.2
+        },
+        "layer_height_0": {
+            "value": 0.2
+        },
+        "wall_thickness": {
+            "value": 1
+        },
+        "top_bottom_thickness": {
+            "value": 1
+        },
+        "bottom_thickness": {
+            "value": 1
+        },
+        "material_print_temperature": {
+            "value": 220
+        },
+        "material_bed_temperature": {
+            "value": 0
+        },
+        "material_diameter": {
+            "value": 1.75
+        },
+        "speed_print": {
+            "value": 40
+        },
+        "speed_infill": {
+            "value": 40
+        },
+        "speed_wall": {
+            "value": 35
+        },
+        "speed_topbottom": {
+            "value": 35
+        },
+        "speed_travel": {
+            "value": 120
+        },
+        "speed_layer_0": {
+            "value": 20
+        },
+        "support_enable": {
+            "value": true
+        }
+    }
+}
\ No newline at end of file