Definition for svt diytech220 (#8062)

* Added Definitions for all SVT FDM printers

CURA-7619

resources/definitions/diy220.def.json

@@ -0,0 +1,89 @@
+{
+    "version": 2,
+    "name": "Diytech 220",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "Venkatkamesh",
+        "manufacturer": "Sri Vignan Technologies",
+        "weight": 3,
+        "file_formats": "text/x-gcode",
+        "platform": "ultimaker3_platform.obj",
+        "platform_texture": "svtbacktext.png",
+        "platform_offset": [0, 0, 0],
+        "has_materials": true,
+        "has_variants": true,
+        "preferred_variant_name": "0.4 mm",
+        "machine_extruder_trains":
+        {
+            "0": "diy220_extruder_0"
+        }
+    },
+    "overrides": {
+        "machine_name": { "default_value": "Diytech 220" },
+        "machine_start_gcode" : {
+            "value": "\"\"  if machine_gcode_flavor == \"UltiGCode\" else \"G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nG28 Z0 ;move Z to bottom endstops\\nG28 X0 Y0 ;move X/Y to endstops\\nG1 X15 Y0 F4000 ;move X/Y to front of printer\\nG1 Z15.0 F9000 ;move the platform to 15mm\\nG92 E0 ;zero the extruded length\\nG1 F200 E50 ;extrude 10 mm of feed stock\\nG92 E0 ;zero the extruded length again\\nG1 F9000\\n;Put printing message on LCD screen\\nM117 Printing...\""
+        },
+        "machine_end_gcode" : {
+            "value": "\";Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\"  if machine_gcode_flavor == \"UltiGCode\" else \"M104 S0 ;extruder heater off\\nM140 S0 ;heated bed heater off (if you have it)\\nG91 ;relative positioning\\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning\\n;Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\""
+        },
+        "machine_width": {
+            "default_value": 220
+        },
+        "machine_depth": {
+            "default_value": 220
+        },
+        "machine_height": {
+            "default_value": 305
+        },
+        "machine_heated_bed": {
+            "default_value": true
+        },
+        "machine_head_with_fans_polygon":
+        {
+            "default_value": [
+                [ -42, 12 ],
+                [ -42, -32 ],
+                [ 62, 12 ],
+                [ 62, -32 ]
+            ]
+        },
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "gantry_height": {
+            "value": "48"
+        },
+        "machine_use_extruder_offset_to_offset_coords": {
+            "default_value": true
+        },
+        "machine_gcode_flavor": {
+            "default_value": "Marlin"
+        },
+        "machine_disallowed_areas": {
+            "default_value": [
+              [[-115,  112.5], [ -82,  112.5], [ -84,  102.5], [-115,  102.5]],
+              [[ 115,  112.5], [ 115,  102.5], [ 110,  102.5], [ 108,  112.5]],
+              [[-115, -112.5], [-115, -104.5], [ -84, -104.5], [ -82, -112.5]],
+              [[ 115, -112.5], [ 108, -112.5], [ 110, -104.5], [ 115, -104.5]]
+        ]},
+        "machine_nozzle_tip_outer_diameter": {
+            "default_value": 1
+        },
+        "machine_nozzle_head_distance": {
+            "default_value": 3
+        },
+        "machine_max_feedrate_x": {
+            "default_value": 300
+        },
+        "machine_max_feedrate_y": {
+            "default_value": 300
+        },
+        "machine_max_feedrate_z": {
+            "default_value": 40
+        },
+        "machine_acceleration": {
+            "default_value": 3000
+        }
+    }
+}

resources/extruders/diy220_extruder_0.def.json

@@ -0,0 +1,15 @@
+{
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "diy220",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": { "default_value": 0 },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}

resources/quality/diy220/diy220_draft.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Draft
+definition = diy220
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = draft
+weight = -2
+global_quality = True
+
+[values]
+layer_height = 0.2

resources/quality/diy220/diy220_fast.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Normal
+definition = diy220
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = fast
+weight = -1
+global_quality = True
+
+[values]
+layer_height = 0.15

resources/quality/diy220/diy220_high.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Extra Fine
+definition = diy220
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = high
+weight = 1
+global_quality = True
+
+[values]
+layer_height = 0.06

resources/quality/diy220/diy220_normal.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Fine
+definition = diy220
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+weight = 0
+global_quality = True
+
+[values]

resources/variants/diy220_0.2.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.2 mm Nozzle
+version = 4
+definition = diy220
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.2

resources/variants/diy220_0.3.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.3 mm Nozzle
+version = 4
+definition = diy220
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.3

resources/variants/diy220_0.4.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.4 mm Nozzle
+version = 4
+definition = diy220
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.4

resources/variants/diy220_0.5.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.5 mm Nozzle
+version = 4
+definition = diy220
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.5

resources/variants/diy220_0.6.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.6 mm Nozzle
+version = 4
+definition = diy220
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.6

resources/variants/diy220_0.8.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.8 mm Nozzle
+version = 4
+definition = diy220
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.8