diff --git a/resources/quality/ultimaker_s5/um_s5_global_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_global_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..ecc31f22de
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_global_Normal_Quality.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 3
+name = Fine
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 4
+type = quality
+quality_type = normal
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.1
diff --git a/resources/variants/ultimaker_s5_aa04.inst.cfg b/resources/variants/ultimaker_s5_aa04.inst.cfg
new file mode 100644
index 0000000000..2984695985
--- /dev/null
+++ b/resources/variants/ultimaker_s5_aa04.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+name = AA 0.4
+version = 3
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 4
+type = variant
+hardware_type = nozzle
+
+[values]
+brim_width = 7
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_id = AA 0.4
+machine_nozzle_tip_outer_diameter = 1.0
+raft_acceleration = =acceleration_print
+raft_airgap = 0.3
+raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
+raft_interface_line_spacing = =raft_interface_line_width + 0.2
+raft_interface_line_width = =line_width * 2
+raft_interface_thickness = =layer_height * 1.5
+raft_jerk = =jerk_print
+raft_margin = 15
+raft_surface_layers = 2
+retraction_amount = 6.5
+retraction_count_max = 25
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = =retraction_speed
+skin_overlap = 15
+speed_print = 70
+speed_topbottom = =math.ceil(speed_print * 30 / 70)
+speed_wall = =math.ceil(speed_print * 30 / 70)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_use_towers = True
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = 1.2
+wall_thickness = 1.3
diff --git a/resources/variants/ultimaker_s5_glass.inst.cfg b/resources/variants/ultimaker_s5_glass.inst.cfg
new file mode 100644
index 0000000000..49e032d387
--- /dev/null
+++ b/resources/variants/ultimaker_s5_glass.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+name = Glass
+version = 3
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 4
+type = variant
+hardware_type = buildplate
+
+[values]
+material_bed_temperature = =default_material_bed_temperature
+machine_buildplate_type = glass