From 8c74429ffcb92bf018a326c2ee5cdd2cd5c91750 Mon Sep 17 00:00:00 2001
From: Ghostkeeper <rubend@tutanota.com>
Date: Wed, 1 Apr 2020 15:30:04 +0200
Subject: [PATCH] Halve the defaults in Cura's built-in profile for maximum
 deviation too

Apply the version upgrade to these profiles too, essentially.

Contributes to issue CURA-7282.
---
 resources/definitions/fdmprinter.def.json   | 2 +-
 resources/definitions/hms434.def.json       | 2 +-
 resources/definitions/peopoly_moai.def.json | 2 +-
 resources/definitions/skriware_2.def.json   | 2 +-
 resources/definitions/ultimaker_s3.def.json | 2 +-
 resources/definitions/ultimaker_s5.def.json | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json
index 4a948ed17f..6f27805c1d 100644
--- a/resources/definitions/fdmprinter.def.json
+++ b/resources/definitions/fdmprinter.def.json
@@ -5984,7 +5984,7 @@
                     "description": "The maximum deviation allowed when reducing the resolution for the Maximum Resolution setting. If you increase this, the print will be less accurate, but the g-code will be smaller. Maximum Deviation is a limit for Maximum Resolution, so if the two conflict the Maximum Deviation will always be held true.",
                     "type": "float",
                     "unit": "mm",
-                    "default_value": 0.05,
+                    "default_value": 0.025,
                     "minimum_value": "0.001",
                     "minimum_value_warning": "0.01",
                     "maximum_value_warning": "0.3",
diff --git a/resources/definitions/hms434.def.json b/resources/definitions/hms434.def.json
index b2dbce3f13..db5b0ab62f 100644
--- a/resources/definitions/hms434.def.json
+++ b/resources/definitions/hms434.def.json
@@ -171,7 +171,7 @@
 
         "meshfix_maximum_resolution":       {"value": 0.01 },
         "meshfix_maximum_travel_resolution":{"value": 0.1 },
-        "meshfix_maximum_deviation":        {"value": 0.01 },
+        "meshfix_maximum_deviation":        {"value": 0.005 },
 
         "minimum_polygon_circumference":    {"value": 0.05 },
         "coasting_enable":                  {"value": false},
diff --git a/resources/definitions/peopoly_moai.def.json b/resources/definitions/peopoly_moai.def.json
index 119d52c201..9c037b0e78 100644
--- a/resources/definitions/peopoly_moai.def.json
+++ b/resources/definitions/peopoly_moai.def.json
@@ -171,7 +171,7 @@
             "value": "0.1"
         },
         "meshfix_maximum_deviation": {
-            "value": "0.003"
+            "value": "0.0015"
         },
         "skin_outline_count": {
             "value": 0
diff --git a/resources/definitions/skriware_2.def.json b/resources/definitions/skriware_2.def.json
index 4534ea0350..05a049496a 100644
--- a/resources/definitions/skriware_2.def.json
+++ b/resources/definitions/skriware_2.def.json
@@ -298,7 +298,7 @@
             "default_value": 15
         },
         "meshfix_maximum_deviation": {
-            "default_value": 0.005
+            "default_value": 0.0025
         },
         "wall_0_material_flow": {
             "value": "99"
diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json
index efdc7cca0a..620de59373 100644
--- a/resources/definitions/ultimaker_s3.def.json
+++ b/resources/definitions/ultimaker_s3.def.json
@@ -156,7 +156,7 @@
         "wall_line_width_x": { "value": "round(line_width * 0.3 / 0.35, 2)" },
         "wall_thickness": { "value": "1" },
         "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" },
-        "meshfix_maximum_deviation": { "value": "layer_height / 2" },
+        "meshfix_maximum_deviation": { "value": "layer_height / 4" },
         "optimize_wall_printing_order": { "value": "True" },
         "retraction_combing": { "default_value": "all" },
         "initial_layer_line_width_factor": { "value": "120" },
diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json
index dcd44a371a..d21edb0843 100644
--- a/resources/definitions/ultimaker_s5.def.json
+++ b/resources/definitions/ultimaker_s5.def.json
@@ -158,7 +158,7 @@
         "wall_line_width_x": { "value": "round(line_width * 0.3 / 0.35, 2)" },
         "wall_thickness": { "value": "1" },
         "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" },
-        "meshfix_maximum_deviation": { "value": "layer_height / 2" },
+        "meshfix_maximum_deviation": { "value": "layer_height / 4" },
         "optimize_wall_printing_order": { "value": "True" },
         "retraction_combing": { "default_value": "all" },
         "initial_layer_line_width_factor": { "value": "120" },