diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.20_draft.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.20_draft.inst.cfg
new file mode 100644
index 0000000000..7ae9006d1c
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.20_draft.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = low 0.2
+weight = -5
+global_quality = True
+variant = 0.2mm Nozzle
+
+[values]
+layer_height = 0.15
+layer_height_0 = 0.15
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.20_standard.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.20_standard.inst.cfg
new file mode 100644
index 0000000000..f32b3325e0
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.20_standard.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal 0.2
+weight = -3
+global_quality = True
+variant = 0.2mm Nozzle
+
+[values]
+layer_height = 0.1
+layer_height_0 = 0.15
+material_diameter = 1.75
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.30_draft.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.30_draft.inst.cfg
new file mode 100644
index 0000000000..eaba909f46
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.30_draft.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+variant = 0.3mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.30_standard.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.30_standard.inst.cfg
new file mode 100644
index 0000000000..00a81596c2
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.30_standard.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal 0.3
+weight = -3
+global_quality = True
+variant = 0.3mm Nozzle
+
+[values]
+layer_height = 0.16
+layer_height_0 = 0.16
+material_diameter = 1.75
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.30_ultra.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.30_ultra.inst.cfg
new file mode 100644
index 0000000000..f1fef088e9
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.30_ultra.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = 0.3mm Nozzle
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.40_adaptive.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.40_adaptive.inst.cfg
new file mode 100644
index 0000000000..599e5aa887
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.40_adaptive.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = 0.4mm Nozzle
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.16
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.40_draft.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.40_draft.inst.cfg
new file mode 100644
index 0000000000..5907ef8695
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.40_draft.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.30
+layer_height_0 = 0.20
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.40_standard.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.40_standard.inst.cfg
new file mode 100644
index 0000000000..14ff3ec99e
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.40_standard.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+material_diameter = 1.75
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.40_ultra.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.40_ultra.inst.cfg
new file mode 100644
index 0000000000..3586ddb3c1
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.40_ultra.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.50_adaptive.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.50_adaptive.inst.cfg
new file mode 100644
index 0000000000..43556a6ea3
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.50_adaptive.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = 0.5mm Nozzle
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.16
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.50_draft.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.50_draft.inst.cfg
new file mode 100644
index 0000000000..69f05ce3dc
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.50_draft.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+variant = 0.5mm Nozzle
+
+[values]
+layer_height = 0.30
+layer_height_0 = 0.20
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.50_standard.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.50_standard.inst.cfg
new file mode 100644
index 0000000000..a99cd68b41
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.50_standard.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+variant = 0.5mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+material_diameter = 1.75
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.50_ultra.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.50_ultra.inst.cfg
new file mode 100644
index 0000000000..55b83f3cbc
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.50_ultra.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = 0.5mm Nozzle
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.60_adaptive.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.60_adaptive.inst.cfg
new file mode 100644
index 0000000000..819dbf12bf
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.60_adaptive.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = 0.6mm Nozzle
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.16
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.60_draft.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.60_draft.inst.cfg
new file mode 100644
index 0000000000..b35ce4aad0
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.60_draft.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.30
+layer_height_0 = 0.20
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.60_low.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.60_low.inst.cfg
new file mode 100644
index 0000000000..bad004e318
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.60_low.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Low Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = low
+weight = -5
+global_quality = True
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.40
+layer_height_0 = 0.20
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.60_standard.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.60_standard.inst.cfg
new file mode 100644
index 0000000000..18c6f98cce
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.60_standard.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+material_diameter = 1.75
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.60_ultra.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.60_ultra.inst.cfg
new file mode 100644
index 0000000000..c9a8066057
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.60_ultra.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.80_adaptive.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.80_adaptive.inst.cfg
new file mode 100644
index 0000000000..6b9cd6222b
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.80_adaptive.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = 0.8mm Nozzle
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.16
+layer_height_0 = 0.2
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.80_draft.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.80_draft.inst.cfg
new file mode 100644
index 0000000000..21e852d87f
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.80_draft.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.30
+layer_height_0 = 0.20
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.80_low.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.80_low.inst.cfg
new file mode 100644
index 0000000000..ae55066067
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.80_low.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Super low Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = low
+weight = -5
+global_quality = True
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.50
+layer_height_0 = 0.20
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.80_standard.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.80_standard.inst.cfg
new file mode 100644
index 0000000000..2c7b52c4a4
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.80_standard.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.80_superlow.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.80_superlow.inst.cfg
new file mode 100644
index 0000000000..d7c591c15b
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.80_superlow.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Super low Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = superlow
+weight = -5
+global_quality = True
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.50
+layer_height_0 = 0.20
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.80_ultra.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.80_ultra.inst.cfg
new file mode 100644
index 0000000000..9fb2ade97d
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_0.80_ultra.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.0_adaptive.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.0_adaptive.inst.cfg
new file mode 100644
index 0000000000..e063ce54e6
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_1.0_adaptive.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = 1.0mm Nozzle
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.16
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.0_draft.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.0_draft.inst.cfg
new file mode 100644
index 0000000000..d9cf650074
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_1.0_draft.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+variant = 1.0mm Nozzle
+
+[values]
+layer_height = 0.30
+layer_height_0 = 0.20
+speed_infill = =speed_print
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.0_low.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.0_low.inst.cfg
new file mode 100644
index 0000000000..fb12c854f6
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_1.0_low.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Low Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = low
+weight = -5
+global_quality = True
+variant = 1.0mm Nozzle
+
+[values]
+layer_height = 0.40
+layer_height_0 = 0.20
diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.0_standard.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.0_standard.inst.cfg
new file mode 100644
index 0000000000..66f64eb698
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_1.0_standard.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+variant = 1.0mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+material_diameter = 1.75
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.0_superlow.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.0_superlow.inst.cfg
new file mode 100644
index 0000000000..0b1477f245
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_1.0_superlow.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Super low Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = superlow
+weight = -5
+global_quality = True
+variant = 1.0mm Nozzle
+
+[values]
+layer_height = 0.50
+layer_height_0 = 0.20
diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.0_ultra.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.0_ultra.inst.cfg
new file mode 100644
index 0000000000..084753427b
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_1.0_ultra.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = 1.0mm Nozzle
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.2_adaptive.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.2_adaptive.inst.cfg
new file mode 100644
index 0000000000..3972ee4f90
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_1.2_adaptive.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = 1.2mm Nozzle
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.16
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.2_draft.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.2_draft.inst.cfg
new file mode 100644
index 0000000000..5ea9e297fc
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_1.2_draft.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+variant = 1.2mm Nozzle
+
+[values]
+layer_height = 0.30
+layer_height_0 = 0.20
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.2_low.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.2_low.inst.cfg
new file mode 100644
index 0000000000..a2dd70e489
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_1.2_low.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Low Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = low
+weight = -5
+global_quality = True
+variant = 1.2mm Nozzle
+
+[values]
+layer_height = 0.40
+layer_height_0 = 0.20
diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.2_standard.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.2_standard.inst.cfg
new file mode 100644
index 0000000000..920c6894d6
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_1.2_standard.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+variant = 1.2mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+material_diameter = 1.75
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.2_superlow.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.2_superlow.inst.cfg
new file mode 100644
index 0000000000..6d06f521c3
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_1.2_superlow.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Super low Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = superlow
+weight = -5
+global_quality = True
+variant = 1.2mm Nozzle
+
+[values]
+layer_height = 0.50
+layer_height_0 = 0.20
+
diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.2_ultra.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.2_ultra.inst.cfg
new file mode 100644
index 0000000000..843bcaba62
--- /dev/null
+++ b/resources/quality/blocks/Nozzle/blocks_global_1.2_ultra.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = 1.2mm Nozzle
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
+
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_adaptive.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_adaptive.inst.cfg
new file mode 100644
index 0000000000..7d23f633aa
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_adaptive.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = HT - 0.4mm
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.16
+layer_height_0 = 0.2
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_draft.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_draft.inst.cfg
new file mode 100644
index 0000000000..3972f64fa1
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_draft.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+variant = HT - 0.4mm
+
+[values]
+layer_height = 0.30
+layer_height_0 = 0.20
+
+
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_standard.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_standard.inst.cfg
new file mode 100644
index 0000000000..92465ef69b
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_standard.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+variant = HT - 0.4mm
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+material_diameter = 1.75
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_ultra.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_ultra.inst.cfg
new file mode 100644
index 0000000000..ef0fc0b7cc
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_ultra.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = HT - 0.4mm
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_adaptive.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_adaptive.inst.cfg
new file mode 100644
index 0000000000..467121c5e4
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_adaptive.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = HT - 0.5mm
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.16
+layer_height_0 = 0.2
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_draft.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_draft.inst.cfg
new file mode 100644
index 0000000000..81985d1175
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_draft.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+variant = HT - 0.5mm
+
+[values]
+layer_height = 0.30
+layer_height_0 = 0.20
+
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_standard.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_standard.inst.cfg
new file mode 100644
index 0000000000..9e4533273e
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_standard.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+variant = HT - 0.5mm
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+material_diameter = 1.75
+
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_ultra.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_ultra.inst.cfg
new file mode 100644
index 0000000000..40ab071df5
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_ultra.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = HT - 0.5mm
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_adaptive.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_adaptive.inst.cfg
new file mode 100644
index 0000000000..d0ffc7679a
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_adaptive.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = HT - 0.6mm
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.16
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_draft.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_draft.inst.cfg
new file mode 100644
index 0000000000..f3f5d47de1
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_draft.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+variant = HT - 0.6mm
+
+[values]
+layer_height = 0.30
+layer_height_0 = 0.20
+
+
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_low.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_low.inst.cfg
new file mode 100644
index 0000000000..3f8e9e0e0c
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_low.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Low Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = low
+weight = 0
+global_quality = True
+variant = HT - 0.6mm
+
+[values]
+layer_height = 0.4
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_standard.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_standard.inst.cfg
new file mode 100644
index 0000000000..ac343f9fe9
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_standard.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+variant = HT - 0.6mm
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+material_diameter = 1.75
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_ultra.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_ultra.inst.cfg
new file mode 100644
index 0000000000..898d75268c
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_ultra.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = HT - 0.6mm
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_adaptive.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_adaptive.inst.cfg
new file mode 100644
index 0000000000..3e3e78b34b
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_adaptive.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = HT - 0.8mm
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.16
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_draft.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_draft.inst.cfg
new file mode 100644
index 0000000000..4809631ee4
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_draft.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+variant = HT - 0.8mm
+
+[values]
+layer_height = 0.30
+layer_height_0 = 0.20
+
+
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_low.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_low.inst.cfg
new file mode 100644
index 0000000000..67da7c7055
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_low.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Low Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = low
+weight = 0
+global_quality = True
+variant = HT - 0.8mm
+
+[values]
+layer_height = 0.4
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_standard.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_standard.inst.cfg
new file mode 100644
index 0000000000..02dd5244ab
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_standard.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+variant = HT - 0.8mm
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+material_diameter = 1.75
+
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_superlow.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_superlow.inst.cfg
new file mode 100644
index 0000000000..8f779d1546
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_superlow.inst.cfg
@@ -0,0 +1,16 @@
+H[general]
+version = 4
+name = Super Low Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = superlow
+weight = 0
+global_quality = True
+variant = HT - 0.8mm
+
+[values]
+layer_height = 0.5
+layer_height_0 = 0.2
diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_ultra.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_ultra.inst.cfg
new file mode 100644
index 0000000000..a56750bbf4
--- /dev/null
+++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_ultra.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = HT - 0.8mm
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.20_adaptive.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.20_adaptive.inst.cfg
new file mode 100644
index 0000000000..02523495b7
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.20_adaptive.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = ST - 0.2mm
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.15
+layer_height_0 = 0.15
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.20_ultra.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.20_ultra.inst.cfg
new file mode 100644
index 0000000000..678554ff24
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.20_ultra.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = ST - 0.2mm
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.15
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_adaptive.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_adaptive.inst.cfg
new file mode 100644
index 0000000000..dd7ab0a02c
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_adaptive.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = ST - 0.3mm
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.16
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_standard.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_standard.inst.cfg
new file mode 100644
index 0000000000..cf8d73c61d
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_standard.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+variant = ST - 0.3mm
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+material_diameter = 1.75
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_ultra.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_ultra.inst.cfg
new file mode 100644
index 0000000000..6529cf506d
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_ultra.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = ST - 0.3mm
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_adaptive.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_adaptive.inst.cfg
new file mode 100644
index 0000000000..930992e6a8
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_adaptive.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = ST - 0.4mm
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.16
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_draft.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_draft.inst.cfg
new file mode 100644
index 0000000000..2532300cf8
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_draft.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+variant = ST - 0.4mm
+
+[values]
+layer_height = 0.30
+layer_height_0 = 0.20
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_standard.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_standard.inst.cfg
new file mode 100644
index 0000000000..bb8ed5e407
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_standard.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+variant = ST - 0.4mm
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+material_diameter = 1.75
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_ultra.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_ultra.inst.cfg
new file mode 100644
index 0000000000..dd2a0dab38
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_ultra.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = ST - 0.4mm
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_adaptive.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_adaptive.inst.cfg
new file mode 100644
index 0000000000..dee1e459ab
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_adaptive.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = ST - 0.5mm
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.16
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_draft.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_draft.inst.cfg
new file mode 100644
index 0000000000..e610c4d010
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_draft.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+variant = ST - 0.5mm
+
+[values]
+layer_height = 0.30
+layer_height_0 = 0.20
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_standard.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_standard.inst.cfg
new file mode 100644
index 0000000000..42131774d2
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_standard.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+variant = ST - 0.5mm
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+material_diameter = 1.75
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_ultra.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_ultra.inst.cfg
new file mode 100644
index 0000000000..3def46e479
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_ultra.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = ST - 0.5mm
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_adaptive.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_adaptive.inst.cfg
new file mode 100644
index 0000000000..911865a93f
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_adaptive.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = ST - 0.6mm
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.16
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_draft.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_draft.inst.cfg
new file mode 100644
index 0000000000..78a2dbdb3b
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_draft.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+variant = ST - 0.6mm
+
+[values]
+layer_height = 0.30
+layer_height_0 = 0.20
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_low.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_low.inst.cfg
new file mode 100644
index 0000000000..73e49f165f
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_low.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Low Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = low
+weight = 0
+global_quality = True
+variant = ST - 0.6mm
+
+[values]
+layer_height = 0.4
+layer_height_0 = 0.2
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_standard.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_standard.inst.cfg
new file mode 100644
index 0000000000..a43bca63c2
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_standard.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+variant = ST - 0.6mm
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+material_diameter = 1.75
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_ultra.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_ultra.inst.cfg
new file mode 100644
index 0000000000..1bbd0d7b16
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_ultra.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = ST - 0.6mm
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_adaptive.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_adaptive.inst.cfg
new file mode 100644
index 0000000000..aa001e824a
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_adaptive.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = ST - 0.8mm
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.16
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_draft.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_draft.inst.cfg
new file mode 100644
index 0000000000..124e2dff49
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_draft.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+variant = ST - 0.8mm
+
+[values]
+layer_height = 0.30
+layer_height_0 = 0.20
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_low.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_low.inst.cfg
new file mode 100644
index 0000000000..ae637ae22c
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_low.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Low Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = low
+weight = 0
+global_quality = True
+variant = ST - 0.8mm
+
+[values]
+layer_height = 0.4
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_standard.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_standard.inst.cfg
new file mode 100644
index 0000000000..7c54c3a1d5
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_standard.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+variant = ST - 0.8mm
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+material_diameter = 1.75
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_superlow.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_superlow.inst.cfg
new file mode 100644
index 0000000000..c426e17752
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_superlow.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Super Low Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = superlow
+weight = 0
+global_quality = True
+variant = ST - 0.8mm
+
+[values]
+layer_height = 0.5
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_ultra.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_ultra.inst.cfg
new file mode 100644
index 0000000000..7f6e50b600
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_ultra.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = ST - 0.8mm
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_adaptive.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_adaptive.inst.cfg
new file mode 100644
index 0000000000..7f75b50585
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_adaptive.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = ST - 1.0mm
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.16
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_draft.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_draft.inst.cfg
new file mode 100644
index 0000000000..19f95dbaa5
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_draft.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+variant = ST - 1.0mm
+
+[values]
+layer_height = 0.30
+layer_height_0 = 0.20
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_low.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_low.inst.cfg
new file mode 100644
index 0000000000..830ee37534
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_low.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Low Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = low
+weight = 0
+global_quality = True
+variant = ST - 1.0mm
+
+[values]
+layer_height = 0.4
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_standard.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_standard.inst.cfg
new file mode 100644
index 0000000000..35c03506f4
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_standard.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+variant = ST - 1.0mm
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+material_diameter = 1.75
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_superlow.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_superlow.inst.cfg
new file mode 100644
index 0000000000..32c970eb70
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_superlow.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Super Low Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = superlow
+weight = 0
+global_quality = True
+variant = ST - 1.0mm
+
+[values]
+layer_height = 0.5
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_ultra.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_ultra.inst.cfg
new file mode 100644
index 0000000000..bdee8799ec
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_ultra.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = ST - 1.0mm
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_adaptive.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_adaptive.inst.cfg
new file mode 100644
index 0000000000..8fb609ad6c
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_adaptive.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+variant = ST - 1.2mm
+
+[values]
+adaptive_layer_height_enabled = true
+layer_height = 0.16
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_draft.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_draft.inst.cfg
new file mode 100644
index 0000000000..c370722d3a
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_draft.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Draft Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+variant = ST - 1.2mm
+
+[values]
+layer_height = 0.30
+layer_height_0 = 0.20
+
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_low.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_low.inst.cfg
new file mode 100644
index 0000000000..5ed7100a56
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_low.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Low Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = low
+weight = 0
+global_quality = True
+variant = ST - 1.2mm
+
+[values]
+layer_height = 0.4
+layer_height_0 = 0.2
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_standard.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_standard.inst.cfg
new file mode 100644
index 0000000000..bbce9c35c6
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_standard.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Standard Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+variant = ST - 1.2mm
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+material_diameter = 1.75
+
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_superlow.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_superlow.inst.cfg
new file mode 100644
index 0000000000..48caa4dea1
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_superlow.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Super Low Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = superlow
+weight = 0
+global_quality = True
+variant = ST - 1.2mm
+
+[values]
+layer_height = 0.5
+layer_height_0 = 0.2
diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_ultra.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_ultra.inst.cfg
new file mode 100644
index 0000000000..aa5d6e8f44
--- /dev/null
+++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_ultra.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = blocks_base
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+variant = ST - 1.2mm
+
+[values]
+layer_height = 0.10
+layer_height_0 = 0.16
+