diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..a40339e9c9
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Draft_Print.inst.cfg
@@ -0,0 +1,98 @@
+[general]
+version = 2
+name = Normal Print 0.8
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = draft
+material = generic_cpe_plus_ultimaker3_AA_0.8
+weight = -2
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 14
+cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
+cool_fan_speed = 8
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_speed = 5
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.6 / 0.7, 2)
+infill_overlap = 0
+infill_pattern = triangles
+infill_sparse_density = 20
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
+jerk_wall = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
+jerk_wall_x = =jerk_wall
+layer_height = 0.2
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.9375
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
+material_bed_temperature = 107
+material_print_temperature = =default_material_print_temperature - 10
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_wipe_enabled = True
+retraction_amount = 6.5
+retraction_combing = off
+retraction_count_max = 25
+retraction_extrusion_window = 1
+retraction_hop = 0.1
+retraction_hop_enabled = False
+retraction_hop_only_when_collides = True
+skin_overlap = 0
+speed_infill = =speed_print
+speed_layer_0 = 15
+speed_prime_tower = =speed_topbottom
+speed_print = 50
+speed_slowdown_layers = 15
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 35 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.6 / 0.7, 2)
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height
+switch_extruder_retraction_amount = 16.5
+top_bottom_thickness = 1.2
+travel_avoid_distance = 1.5
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =wall_line_width
+wall_thickness = 2
diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg
new file mode 100644
index 0000000000..8b1fbabea8
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg
@@ -0,0 +1,98 @@
+[general]
+version = 2
+name = Draft Print 0.8
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = superdraft
+material = generic_cpe_plus_ultimaker3_AA_0.8
+weight = -2
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 14
+cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
+cool_fan_speed = 8
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_speed = 5
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.6 / 0.7, 2)
+infill_overlap = 0
+infill_pattern = triangles
+infill_sparse_density = 20
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
+jerk_wall = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
+jerk_wall_x = =jerk_wall
+layer_height = 0.4
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.9375
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
+material_bed_temperature = 107
+material_print_temperature = =default_material_print_temperature - 5 
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = True
+prime_tower_wipe_enabled = True
+retraction_amount = 6.5
+retraction_combing = off
+retraction_count_max = 25
+retraction_extrusion_window = 1
+retraction_hop = 0.1
+retraction_hop_enabled = False
+retraction_hop_only_when_collides = True
+skin_overlap = 0
+speed_infill = =speed_print
+speed_layer_0 = 15
+speed_prime_tower = =speed_topbottom
+speed_print = 50
+speed_slowdown_layers = 8
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 35 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.6 / 0.7, 2)
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height
+switch_extruder_retraction_amount = 16.5
+top_bottom_thickness = 1.2
+travel_avoid_distance = 1.5
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =wall_line_width
+wall_thickness = 2
diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg
new file mode 100644
index 0000000000..a478ea8b8a
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg
@@ -0,0 +1,98 @@
+[general]
+version = 2
+name = Fasr Print 0.8
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = verydraft
+material = generic_cpe_plus_ultimaker3_AA_0.8
+weight = -1
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 14
+cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
+cool_fan_speed = 8
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_speed = 5
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.6 / 0.7, 2)
+infill_overlap = 0
+infill_pattern = triangles
+infill_sparse_density = 20
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
+jerk_wall = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
+jerk_wall_x = =jerk_wall
+layer_height = 0.3
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.9375
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
+material_bed_temperature = 107
+material_print_temperature = =default_material_print_temperature - 7
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = True
+prime_tower_wipe_enabled = True
+retraction_amount = 6.5
+retraction_combing = off
+retraction_count_max = 25
+retraction_extrusion_window = 1
+retraction_hop = 0.1
+retraction_hop_enabled = False
+retraction_hop_only_when_collides = True
+skin_overlap = 0
+speed_infill = =speed_print
+speed_layer_0 = 15
+speed_prime_tower = =speed_topbottom
+speed_print = 50
+speed_slowdown_layers = 10
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 35 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.6 / 0.7, 2)
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height
+switch_extruder_retraction_amount = 16.5
+top_bottom_thickness = 1.2
+travel_avoid_distance = 1.5
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =wall_line_width
+wall_thickness = 2
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..c03e7bc385
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Draft_Print.inst.cfg
@@ -0,0 +1,101 @@
+[general]
+version = 2
+name = Normal 0.8 Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = draft
+material = generic_pc_ultimaker3_AA_0.8
+weight = 0
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 14
+cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
+cool_fan_speed = 5
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_speed = 5
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.6 / 0.7, 2)
+infill_overlap = 0
+infill_pattern = triangles
+infill_sparse_density = 20
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
+jerk_wall = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
+jerk_wall_x = =jerk_wall
+layer_height = 0.2
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.875
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature = 107
+material_print_temperature = =default_material_print_temperature - 5
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_wipe_enabled = True
+raft_airgap = 0.5
+raft_margin = 15
+retract_at_layer_change = True
+retraction_amount = 6.5
+retraction_count_max = 25
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+skin_overlap = 0
+speed_infill = =speed_print
+speed_layer_0 = 15
+speed_prime_tower = =speed_topbottom
+speed_print = 50
+speed_slowdown_layers = 15
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_line_width = =round(line_width * 0.6 / 0.7, 2)
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_retraction_amount = 16.5
+top_bottom_thickness = 1.4
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =wall_line_width
+wall_thickness = 2
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg
new file mode 100644
index 0000000000..eed4fbf3a6
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg
@@ -0,0 +1,101 @@
+[general]
+version = 2
+name = Draft 0.8 Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = superdraft
+material = generic_pc_ultimaker3_AA_0.8
+weight = -2
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 14
+cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
+cool_fan_speed = 5
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_speed = 5
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.6 / 0.7, 2)
+infill_overlap = 0
+infill_pattern = triangles
+infill_sparse_density = 20
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
+jerk_wall = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
+jerk_wall_x = =jerk_wall
+layer_height = 0.4
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.875
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature = 107
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_wipe_enabled = True
+raft_airgap = 0.5
+raft_margin = 15
+retract_at_layer_change = True
+retraction_amount = 6.5
+retraction_count_max = 25
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+skin_overlap = 0
+speed_infill = =speed_print
+speed_layer_0 = 15
+speed_prime_tower = =speed_topbottom
+speed_print = 50
+speed_slowdown_layers = 8
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_line_width = =round(line_width * 0.6 / 0.7, 2)
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_retraction_amount = 16.5
+top_bottom_thickness = 1.4
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =wall_line_width
+wall_thickness = 2
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg
new file mode 100644
index 0000000000..c1a15d3ddc
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg
@@ -0,0 +1,101 @@
+[general]
+version = 2
+name = Fast 0.8 Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = verydraft
+material = generic_pc_ultimaker3_AA_0.8
+weight = -1
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 14
+cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
+cool_fan_speed = 5
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_speed = 5
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.6 / 0.7, 2)
+infill_overlap = 0
+infill_pattern = triangles
+infill_sparse_density = 20
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
+jerk_wall = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
+jerk_wall_x = =jerk_wall
+layer_height = 0.3
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.875
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature = 107
+material_print_temperature = =default_material_print_temperature - 2
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_wipe_enabled = True
+raft_airgap = 0.5
+raft_margin = 15
+retract_at_layer_change = True
+retraction_amount = 6.5
+retraction_count_max = 25
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+skin_overlap = 0
+speed_infill = =speed_print
+speed_layer_0 = 15
+speed_prime_tower = =speed_topbottom
+speed_print = 50
+speed_slowdown_layers = 10
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_line_width = =round(line_width * 0.6 / 0.7, 2)
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_retraction_amount = 16.5
+top_bottom_thickness = 1.4
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =wall_line_width
+wall_thickness = 2