diff --git a/resources/i18n/cs_CZ/fdmprinter.def.json.po b/resources/i18n/cs_CZ/fdmprinter.def.json.po index 655ec3ad73..555e90db4e 100644 --- a/resources/i18n/cs_CZ/fdmprinter.def.json.po +++ b/resources/i18n/cs_CZ/fdmprinter.def.json.po @@ -5387,6 +5387,53 @@ msgctxt "travel description" msgid "travel" msgstr "cestování" + + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + + + #~ msgctxt "machine_head_with_fans_polygon description" #~ msgid "A 2D silhouette of the print head (fan caps included)." #~ msgstr "2D silueta tiskové hlavy (včetně krytů ventilátoru)." diff --git a/resources/i18n/de_DE/fdmprinter.def.json.po b/resources/i18n/de_DE/fdmprinter.def.json.po index cfdadf1d85..bc2d206872 100644 --- a/resources/i18n/de_DE/fdmprinter.def.json.po +++ b/resources/i18n/de_DE/fdmprinter.def.json.po @@ -5384,6 +5384,53 @@ msgctxt "travel description" msgid "travel" msgstr "Bewegungen" + + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + + + #~ msgctxt "hole_xy_offset description" #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes." #~ msgstr "Versatz, der auf die Löcher in jeder Schicht angewandt wird. Bei positiven Werten werden die Löcher vergrößert; bei negativen Werten werden die Löcher verkleinert." diff --git a/resources/i18n/es_ES/fdmprinter.def.json.po b/resources/i18n/es_ES/fdmprinter.def.json.po index 855a5a3839..bed9c84bc6 100644 --- a/resources/i18n/es_ES/fdmprinter.def.json.po +++ b/resources/i18n/es_ES/fdmprinter.def.json.po @@ -5384,6 +5384,52 @@ msgctxt "travel description" msgid "travel" msgstr "desplazamiento" + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + + + #~ msgctxt "hole_xy_offset description" #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes." #~ msgstr "Cantidad de desplazamiento aplicado a todos los orificios en cada capa. Los valores positivos aumentan el tamaño de los orificios y los valores negativos reducen el tamaño de los mismos." diff --git a/resources/i18n/fdmprinter.def.json.pot b/resources/i18n/fdmprinter.def.json.pot index fb8611450e..0be9563268 100644 --- a/resources/i18n/fdmprinter.def.json.pot +++ b/resources/i18n/fdmprinter.def.json.pot @@ -5372,3 +5372,46 @@ msgctxt "mesh_rotation_matrix description" msgid "Transformation matrix to be applied to the model when loading it from file." msgstr "" + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" \ No newline at end of file diff --git a/resources/i18n/fi_FI/fdmprinter.def.json.po b/resources/i18n/fi_FI/fdmprinter.def.json.po index 11d4574369..9ed9cefbfd 100644 --- a/resources/i18n/fi_FI/fdmprinter.def.json.po +++ b/resources/i18n/fi_FI/fdmprinter.def.json.po @@ -5386,6 +5386,52 @@ msgctxt "travel description" msgid "travel" msgstr "siirtoliike" + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + + + #~ msgctxt "machine_head_polygon description" #~ msgid "A 2D silhouette of the print head (fan caps excluded)." #~ msgstr "2D-siluetti tulostuspäästä (tuulettimen kannattimet pois lukien)" diff --git a/resources/i18n/fr_FR/fdmprinter.def.json.po b/resources/i18n/fr_FR/fdmprinter.def.json.po index 0d73ce9446..30716f7a65 100644 --- a/resources/i18n/fr_FR/fdmprinter.def.json.po +++ b/resources/i18n/fr_FR/fdmprinter.def.json.po @@ -5384,6 +5384,52 @@ msgctxt "travel description" msgid "travel" msgstr "déplacement" + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + + + #~ msgctxt "hole_xy_offset description" #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes." #~ msgstr "Le décalage appliqué à tous les trous dans chaque couche. Les valeurs positives augmentent la taille des trous ; les valeurs négatives réduisent la taille des trous." diff --git a/resources/i18n/hu_HU/fdmprinter.def.json.po b/resources/i18n/hu_HU/fdmprinter.def.json.po index 58bc6e990a..f5bd1b0be7 100644 --- a/resources/i18n/hu_HU/fdmprinter.def.json.po +++ b/resources/i18n/hu_HU/fdmprinter.def.json.po @@ -5398,6 +5398,53 @@ msgctxt "travel description" msgid "travel" msgstr "fej átpozícionálás" + + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + + + #~ msgctxt "machine_head_polygon description" #~ msgid "A 2D silhouette of the print head (fan caps excluded)." #~ msgstr "A nyomtatófej 2D -s árnyéka (ventillátor nélkül)." diff --git a/resources/i18n/it_IT/fdmprinter.def.json.po b/resources/i18n/it_IT/fdmprinter.def.json.po index 0baa780e1f..d385de664e 100644 --- a/resources/i18n/it_IT/fdmprinter.def.json.po +++ b/resources/i18n/it_IT/fdmprinter.def.json.po @@ -5384,6 +5384,52 @@ msgctxt "travel description" msgid "travel" msgstr "spostamenti" + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + + + #~ msgctxt "hole_xy_offset description" #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes." #~ msgstr "Entità di offset applicato a tutti i fori di ciascuno strato. Valori positivi aumentano le dimensioni dei fori, mentre valori negativi le riducono." diff --git a/resources/i18n/ja_JP/fdmprinter.def.json.po b/resources/i18n/ja_JP/fdmprinter.def.json.po index 5c32d806f0..ef7097cdd9 100644 --- a/resources/i18n/ja_JP/fdmprinter.def.json.po +++ b/resources/i18n/ja_JP/fdmprinter.def.json.po @@ -5388,6 +5388,54 @@ msgctxt "travel description" msgid "travel" msgstr "移動" + + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + + + + #~ msgctxt "hole_xy_offset description" #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes." #~ msgstr "各穴のすべてのポリゴンに適用されるオフセットの量。正の値は穴のサイズを大きくします。負の値は穴のサイズを小さくします。" diff --git a/resources/i18n/ko_KR/fdmprinter.def.json.po b/resources/i18n/ko_KR/fdmprinter.def.json.po index 9e6a34c038..ce998db986 100644 --- a/resources/i18n/ko_KR/fdmprinter.def.json.po +++ b/resources/i18n/ko_KR/fdmprinter.def.json.po @@ -5384,6 +5384,51 @@ msgctxt "travel description" msgid "travel" msgstr "이동" + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + + #~ msgctxt "hole_xy_offset description" #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes." #~ msgstr "각 레이어의 모든 구멍에 적용된 오프셋의 양. 양수 값은 구멍 크기를 증가시키며, 음수 값은 구멍 크기를 줄입니다." diff --git a/resources/i18n/nl_NL/fdmprinter.def.json.po b/resources/i18n/nl_NL/fdmprinter.def.json.po index f47ab89458..69a2f75e65 100644 --- a/resources/i18n/nl_NL/fdmprinter.def.json.po +++ b/resources/i18n/nl_NL/fdmprinter.def.json.po @@ -5384,6 +5384,53 @@ msgctxt "travel description" msgid "travel" msgstr "beweging" + + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + + + #~ msgctxt "hole_xy_offset description" #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes." #~ msgstr "De offset die wordt toegepast op alle gaten in elke laag. Met positieve waarden worden de gaten groter, met negatieve waarden worden de gaten kleiner." diff --git a/resources/i18n/pl_PL/fdmprinter.def.json.po b/resources/i18n/pl_PL/fdmprinter.def.json.po index 340f5be2d9..b4f9cd9960 100644 --- a/resources/i18n/pl_PL/fdmprinter.def.json.po +++ b/resources/i18n/pl_PL/fdmprinter.def.json.po @@ -5397,6 +5397,52 @@ msgctxt "travel description" msgid "travel" msgstr "ruch jałowy" + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + + + #~ msgctxt "machine_head_polygon description" #~ msgid "A 2D silhouette of the print head (fan caps excluded)." #~ msgstr "Sylwetka 2D głowicy drukującej (bez nasadki wentylatora)." diff --git a/resources/i18n/pt_BR/fdmprinter.def.json.po b/resources/i18n/pt_BR/fdmprinter.def.json.po index bb6e6a2256..0bfe0f2c32 100644 --- a/resources/i18n/pt_BR/fdmprinter.def.json.po +++ b/resources/i18n/pt_BR/fdmprinter.def.json.po @@ -5398,6 +5398,53 @@ msgctxt "travel description" msgid "travel" msgstr "percurso" + + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + + + #~ msgctxt "machine_head_polygon description" #~ msgid "A 2D silhouette of the print head (fan caps excluded)." #~ msgstr "Uma silhueta 2D da cabeça de impressão (sem os suportes de ventoinhas)." diff --git a/resources/i18n/pt_PT/fdmprinter.def.json.po b/resources/i18n/pt_PT/fdmprinter.def.json.po index 674d7ddc0d..834d5d4208 100644 --- a/resources/i18n/pt_PT/fdmprinter.def.json.po +++ b/resources/i18n/pt_PT/fdmprinter.def.json.po @@ -5384,6 +5384,53 @@ msgctxt "travel description" msgid "travel" msgstr "deslocação" + + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + + + #~ msgctxt "hole_xy_offset description" #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes." #~ msgstr "Quantidade de desvio aplicado a todos os buracos em cada camada. Valores positivos aumentam o tamanho dos buracos; valores negativos reduzem o tamanho dos buracos." diff --git a/resources/i18n/ru_RU/fdmprinter.def.json.po b/resources/i18n/ru_RU/fdmprinter.def.json.po index 609e5d0cbb..13e2a2564f 100644 --- a/resources/i18n/ru_RU/fdmprinter.def.json.po +++ b/resources/i18n/ru_RU/fdmprinter.def.json.po @@ -5384,6 +5384,53 @@ msgctxt "travel description" msgid "travel" msgstr "перемещение" + + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + + + #~ msgctxt "hole_xy_offset description" #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes." #~ msgstr "Смещение, применяемое ко всем отверстиям в каждом слое. Положительные значения увеличивают размер отверстий; отрицательные значения уменьшают размер отверстий." diff --git a/resources/i18n/tr_TR/fdmprinter.def.json.po b/resources/i18n/tr_TR/fdmprinter.def.json.po index c1604a340b..f9a0db806f 100644 --- a/resources/i18n/tr_TR/fdmprinter.def.json.po +++ b/resources/i18n/tr_TR/fdmprinter.def.json.po @@ -5384,6 +5384,52 @@ msgctxt "travel description" msgid "travel" msgstr "hareket" + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + + + #~ msgctxt "hole_xy_offset description" #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes." #~ msgstr "Her bir katmandaki tüm deliklere uygulanan ofset miktarıdır. Pozitif değerler deliklerin boyutunu artırırken, negatif değerler deliklerin boyutunu düşürür." diff --git a/resources/i18n/zh_CN/fdmprinter.def.json.po b/resources/i18n/zh_CN/fdmprinter.def.json.po index bc0cb3a481..c7b1256bbf 100644 --- a/resources/i18n/zh_CN/fdmprinter.def.json.po +++ b/resources/i18n/zh_CN/fdmprinter.def.json.po @@ -5384,6 +5384,52 @@ msgctxt "travel description" msgid "travel" msgstr "空驶" + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + + + #~ msgctxt "hole_xy_offset description" #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes." #~ msgstr "应用到每一层中所有孔洞的偏移量。正数值可以补偿过大的孔洞，负数值可以补偿过小的孔洞。" diff --git a/resources/i18n/zh_TW/fdmprinter.def.json.po b/resources/i18n/zh_TW/fdmprinter.def.json.po index 9881e5283f..8d1c4e2a06 100644 --- a/resources/i18n/zh_TW/fdmprinter.def.json.po +++ b/resources/i18n/zh_TW/fdmprinter.def.json.po @@ -5398,6 +5398,51 @@ msgctxt "travel description" msgid "travel" msgstr "空跑" + + +### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better. + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + + #~ msgctxt "machine_head_polygon description" #~ msgid "A 2D silhouette of the print head (fan caps excluded)." #~ msgstr "列印頭 2D 輪廓圖（不包含風扇蓋）。"