Merge pull request #8200 from oducceu/master

Add 'Flying Bear Ghost 5' printer

resources/definitions/flyingbear_base.def.json

@@ -21,7 +21,131 @@
 		"has_machine_quality": true,
 		"preferred_quality_type": "normal",
 
-		"exclude_materials": ["Vertex_Delta_ABS", "Vertex_Delta_PET", "Vertex_Delta_PLA", "Vertex_Delta_PLA_Glitter", "Vertex_Delta_PLA_Mat", "Vertex_Delta_PLA_Satin", "Vertex_Delta_PLA_Wood", "Vertex_Delta_TPU", "chromatik_pla", "dsm_arnitel2045_175", "dsm_novamid1070_175", "emotiontech_abs", "emotiontech_asax", "emotiontech_hips", "emotiontech_petg", "emotiontech_pla", "emotiontech_pva-m", "emotiontech_pva-oks", "emotiontech_pva-s", "emotiontech_tpu98a", "fabtotum_abs", "fabtotum_nylon", "fabtotum_pla", "fabtotum_tpu", "fiberlogy_hd_pla", "filo3d_pla", "filo3d_pla_green", "filo3d_pla_red", "generic_abs", "generic_bam", "generic_cffcpe", "generic_cffpa", "generic_cpe", "generic_cpe_plus", "generic_gffcpe", "generic_gffpa", "generic_hips", "generic_nylon", "generic_pc", "generic_petg", "generic_pla", "generic_pp", "generic_pva", "generic_tough_pla", "generic_tpu", "imade3d_petg_green", "imade3d_petg_pink", "imade3d_pla_green", "imade3d_pla_pink", "imade3d_petg_175", "imade3d_pla_175", "innofill_innoflex60_175", "leapfrog_abs_natural", "leapfrog_epla_natural", "leapfrog_pva_natural", "octofiber_pla", "polyflex_pla", "polymax_pla", "polyplus_pla", "polywood_pla", "structur3d_dap100silicone", "tizyx_abs", "tizyx_flex", "tizyx_petg", "tizyx_pla", "tizyx_pla_bois", "tizyx_pva", "ultimaker_abs_black", "ultimaker_abs_blue", "ultimaker_abs_green", "ultimaker_abs_grey", "ultimaker_abs_orange", "ultimaker_abs_pearl-gold", "ultimaker_abs_red", "ultimaker_abs_silver-metallic", "ultimaker_abs_white", "ultimaker_abs_yellow", "ultimaker_bam", "ultimaker_cpe_black", "ultimaker_cpe_blue", "ultimaker_cpe_dark-grey", "ultimaker_cpe_green", "ultimaker_cpe_light-grey", "ultimaker_cpe_plus_black", "ultimaker_cpe_plus_transparent", "ultimaker_cpe_plus_white", "ultimaker_cpe_red", "ultimaker_cpe_transparent", "ultimaker_cpe_white", "ultimaker_cpe_yellow", "ultimaker_nylon_black", "ultimaker_nylon_transparent", "ultimaker_pc_black", "ultimaker_pc_transparent", "ultimaker_pc_white", "ultimaker_pla_black", "ultimaker_pla_blue", "ultimaker_pla_green", "ultimaker_pla_magenta", "ultimaker_pla_orange", "ultimaker_pla_pearl-white", "ultimaker_pla_red", "ultimaker_pla_silver-metallic", "ultimaker_pla_transparent", "ultimaker_pla_white", "ultimaker_pla_yellow", "ultimaker_pp_transparent", "ultimaker_pva", "ultimaker_tough_pla_black", "ultimaker_tough_pla_green", "ultimaker_tough_pla_red", "ultimaker_tough_pla_white", "ultimaker_tpu_black", "ultimaker_tpu_blue", "ultimaker_tpu_red", "ultimaker_tpu_white", "verbatim_bvoh_175", "zyyx_pro_flex", "zyyx_pro_pla"]
+		"exclude_materials": [
+			"chromatik_pla",
+			"dsm_arnitel2045_175",
+			"dsm_novamid1070_175", 
+			"emotiontech_abs", 
+			"emotiontech_absx", 
+			"emotiontech_asax", 
+			"emotiontech_bvoh", 
+			"emotiontech_hips", 
+			"emotiontech_petg", 
+			"emotiontech_pla", 
+			"emotiontech_pva-m", 
+			"emotiontech_pva-s", 
+			"emotiontech_tpu98a", 
+			"fabtotum_abs", 
+			"fabtotum_nylon", 
+			"fabtotum_pla", 
+			"fabtotum_tpu", 
+			"fiberlogy_hd_pla", 
+			"filo3d_pla", 
+			"filo3d_pla_green", 
+			"filo3d_pla_red", 
+			"generic_abs", 
+			"generic_bam", 
+			"generic_cffcpe", 
+			"generic_cffpa", 
+			"generic_cpe", 
+			"generic_cpe_plus", 
+			"generic_gffcpe", 
+			"generic_gffpa", 
+			"generic_hips", 
+			"generic_nylon", 
+			"generic_pc", 
+			"generic_petg", 
+			"generic_pla", 
+			"generic_pp", 
+			"generic_pva", 
+			"generic_tough_pla", 
+			"generic_tpu", 
+			"imade3d_petg_175", 
+			"imade3d_pla_175", 
+			"innofill_innoflex60_175", 
+			"leapfrog_abs_natural", 
+			"leapfrog_epla_natural", 
+			"leapfrog_pva_natural", 
+			"octofiber_pla", 
+			"polyflex_pla", 
+			"polymax_pla", 
+			"polyplus_pla", 
+			"polywood_pla", 
+			"redd_abs", 
+			"redd_asa", 
+			"redd_hips", 
+			"redd_nylon", 
+			"redd_petg", 
+			"redd_pla", 
+			"redd_tpe", 
+			"structur3d_dap100silicone", 
+			"tizyx_abs", 
+			"tizyx_flex", 
+			"tizyx_petg", 
+			"tizyx_pla", 
+			"tizyx_pla_bois", 
+			"tizyx_pva", 
+			"ultimaker_abs_black", 
+			"ultimaker_abs_blue", 
+			"ultimaker_abs_green", 
+			"ultimaker_abs_grey", 
+			"ultimaker_abs_orange", 
+			"ultimaker_abs_pearl-gold", 
+			"ultimaker_abs_red", 
+			"ultimaker_abs_silver-metallic", 
+			"ultimaker_abs_white", 
+			"ultimaker_abs_yellow", 
+			"ultimaker_bam", 
+			"ultimaker_cpe_black", 
+			"ultimaker_cpe_blue", 
+			"ultimaker_cpe_dark-grey", 
+			"ultimaker_cpe_green", 
+			"ultimaker_cpe_light-grey", 
+			"ultimaker_cpe_plus_black", 
+			"ultimaker_cpe_plus_transparent", 
+			"ultimaker_cpe_plus_white", 
+			"ultimaker_cpe_red", 
+			"ultimaker_cpe_transparent", 
+			"ultimaker_cpe_white", 
+			"ultimaker_cpe_yellow", 
+			"ultimaker_nylon_black", 
+			"ultimaker_nylon_transparent", 
+			"ultimaker_pc_black", 
+			"ultimaker_pc_transparent", 
+			"ultimaker_pc_white", 
+			"ultimaker_pla_black", 
+			"ultimaker_pla_blue", 
+			"ultimaker_pla_green", 
+			"ultimaker_pla_magenta", 
+			"ultimaker_pla_orange", 
+			"ultimaker_pla_pearl-white", 
+			"ultimaker_pla_red", 
+			"ultimaker_pla_silver-metallic", 
+			"ultimaker_pla_transparent", 
+			"ultimaker_pla_white", 
+			"ultimaker_pla_yellow", 
+			"ultimaker_pp_transparent", 
+			"ultimaker_pva", 
+			"ultimaker_tough_pla_black", 
+			"ultimaker_tough_pla_green", 
+			"ultimaker_tough_pla_red", 
+			"ultimaker_tough_pla_white", 
+			"ultimaker_tpu_black", 
+			"ultimaker_tpu_blue", 
+			"ultimaker_tpu_red", 
+			"ultimaker_tpu_white", 
+			"verbatim_bvoh_175", 
+			"Vertex_Delta_ABS", 
+			"Vertex_Delta_PET", 
+			"Vertex_Delta_PLA", 
+			"Vertex_Delta_PLA_Glitter", 
+			"Vertex_Delta_PLA_Mat", 
+			"Vertex_Delta_PLA_Satin", 
+			"Vertex_Delta_PLA_Wood", 
+			"Vertex_Delta_TPU", 
+			"zyyx_pro_flex", 
+			"zyyx_pro_pla"
+		]
 	},
 	"overrides": {
 		"machine_name": 			{ "default_value": "Flying Bear Base Printer" },
@@ -72,7 +196,7 @@
 		"retraction_extrusion_window": 		{ "value": 10 },
 
 		"speed_print": 				{ "value": 60 } ,
-		"speed_infill": 			{ "value": "speed_print" },
+		"speed_infill": 			{ "value": "speed_print * 1.5" },
 		"speed_wall": 				{ "value": "speed_print / 2" },
 		"speed_wall_0": 			{ "value": "speed_wall" },
 		"speed_wall_x": 			{ "value": "speed_print" },
@@ -82,7 +206,7 @@
 		"speed_support_interface": 		{ "value": "speed_topbottom" },
 		"speed_prime_tower": 			{ "value": "speed_topbottom" },
 		"speed_travel": 			{ "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
-		"speed_layer_0": 			{ "value": 20 },
+		"speed_layer_0": 			{ "value": "speed_print / 2" },
 		"speed_print_layer_0": 			{ "value": "speed_layer_0" },
 		"speed_travel_layer_0": 		{ "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
 		"skirt_brim_speed": 			{ "value": "speed_layer_0" },
@@ -124,6 +248,7 @@
 		"skirt_gap": 				{ "value": 10 },
 		"skirt_brim_minimal_length": 		{ "value": 50 },
 		"brim_replaces_support": 		{ "value": false },
+		"brim_gap": 				{ "value": "line_width / 2 if line_width < 0.4 else 0.2" },
 
 		"meshfix_maximum_resolution": 		{ "value": 0.05 },
 		"meshfix_maximum_travel_resolution": 	{ "value": "meshfix_maximum_resolution" },

resources/definitions/flyingbear_ghost_5.def.json

@@ -0,0 +1,55 @@
+{
+	"name": "Flying Bear Ghost 5",
+	"version": 2,
+	"inherits": "flyingbear_base",   
+	"metadata": {
+		"visible": true,
+		"author": "oducceu",
+
+		"platform": "flyingbear_platform.obj",
+		"platform_texture": "flyingbear_platform.png",
+
+		"quality_definition": "flyingbear_base"
+
+	},
+
+	"overrides": {
+		"machine_name": 		{ "default_value": "Flying Bear Ghost 5" },
+		"machine_start_gcode": 			{ "default_value": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\n;Fix X0 Y0 being outside the bed after homing\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X1.3 Y4.8 ;Place the nozzle over the bed\nG92 X0 Y0 ;Set new X0 Y0\n\n;Code for nozzle cleaning and flow normalization\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.4 Y20 Z0.28 F5000.0\nG1 X10.4 Y170.0 Z0.28 F1500.0 E15\nG1 X10.1 Y170.0 Z0.28 F5000.0\nG1 X10.1 Y40 Z0.28 F1500.0 E30\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up" },
+		"machine_width": 		{ "default_value": 255 },
+		"machine_depth": 		{ "default_value": 210 },
+		"machine_height": 		{ "default_value": 210 },
+
+		"machine_steps_per_mm_x": 	{ "default_value": 80 },
+		"machine_steps_per_mm_y": 	{ "default_value": 80 },
+		"machine_steps_per_mm_z": 	{ "default_value": 400 },
+		"machine_steps_per_mm_e": 	{ "default_value": 410 },
+
+		"machine_max_feedrate_x": 	{ "value": 300 },
+		"machine_max_feedrate_y": 	{ "value": 300 },
+		"machine_max_feedrate_z": 	{ "value": 20 },
+		"machine_max_feedrate_e": 	{ "value": 70 },
+
+		"acceleration_enabled": 	{ "value": false },
+		"jerk_enabled": 		{ "value": false },
+
+		"machine_max_acceleration_x": 	{ "value": 1000 },
+		"machine_max_acceleration_y": 	{ "value": 1000 },
+		"machine_max_acceleration_z": 	{ "value": 200 },
+		"machine_max_acceleration_e": 	{ "value": 80000 },
+		"machine_acceleration": 	{ "value": 1000 },
+
+		"machine_max_jerk_xy": 		{ "value": 20 },
+		"machine_max_jerk_z": 		{ "value": 0.4 },
+		"machine_max_jerk_e": 		{ "value": 5.0 },
+
+		"acceleration_print": 		{ "value": 1000 },
+		"acceleration_travel": 		{ "value": 3000 },
+		"acceleration_travel_layer_0": 	{ "value": "acceleration_travel" },
+		"acceleration_roofing": 	{ "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
+
+		"jerk_print": 			{ "value": 20 },
+		"jerk_travel": 			{ "value": "jerk_print" },
+		"jerk_travel_layer_0": 		{ "value": "jerk_travel" }
+   }
+}

resources/quality/flyingbear/abs/flyingbear_0.25_abs_super.inst.cfg

@@ -12,3 +12,4 @@ variant = 0.25mm Nozzle
 
 [values]
 wall_thickness = =line_width*6
+adhesion_type = brim

resources/quality/flyingbear/abs/flyingbear_0.25_abs_ultra.inst.cfg

@@ -12,3 +12,4 @@ variant = 0.25mm Nozzle
 
 [values]
 wall_thickness = =line_width*6
+adhesion_type = brim

resources/quality/flyingbear/abs/flyingbear_0.30_abs_adaptive.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = adaptive
+material = generic_abs
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*5
+adhesion_type = brim

resources/quality/flyingbear/abs/flyingbear_0.30_abs_standard.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Standard Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+material = generic_abs
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*5
+adhesion_type = brim

resources/quality/flyingbear/abs/flyingbear_0.30_abs_super.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Super Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = super
+material = generic_abs
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*5
+adhesion_type = brim

resources/quality/flyingbear/abs/flyingbear_0.40_abs_adaptive.inst.cfg

@@ -12,3 +12,4 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+adhesion_type = brim

resources/quality/flyingbear/abs/flyingbear_0.40_abs_low.inst.cfg

@@ -12,3 +12,4 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+adhesion_type = brim

resources/quality/flyingbear/abs/flyingbear_0.40_abs_standard.inst.cfg

@@ -12,3 +12,4 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+adhesion_type = brim

resources/quality/flyingbear/abs/flyingbear_0.40_abs_super.inst.cfg

@@ -12,3 +12,4 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+adhesion_type = brim

resources/quality/flyingbear/abs/flyingbear_0.50_abs_adaptive.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = adaptive
+material = generic_abs
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+adhesion_type = brim

resources/quality/flyingbear/abs/flyingbear_0.50_abs_draft.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Draft Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = draft
+material = generic_abs
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+adhesion_type = brim

resources/quality/flyingbear/abs/flyingbear_0.50_abs_low.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Low Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = low
+material = generic_abs
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+adhesion_type = brim

resources/quality/flyingbear/abs/flyingbear_0.50_abs_standard.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Standard Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+material = generic_abs
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+adhesion_type = brim

resources/quality/flyingbear/abs/flyingbear_0.60_abs_draft.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Draft Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = draft
+material = generic_abs
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3
+adhesion_type = brim

resources/quality/flyingbear/abs/flyingbear_0.60_abs_low.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Low Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = low
+material = generic_abs
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3
+adhesion_type = brim

resources/quality/flyingbear/abs/flyingbear_0.60_abs_standard.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Standard Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+material = generic_abs
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3
+adhesion_type = brim

resources/quality/flyingbear/abs/flyingbear_0.80_abs_coarse.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Coarse Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = coarse
+material = generic_abs
+variant = 0.8mm Nozzle
+
+[values]
+wall_thickness = =line_width*2
+adhesion_type = brim

resources/quality/flyingbear/abs/flyingbear_0.80_abs_draft.inst.cfg

@@ -11,4 +11,5 @@ material = generic_abs
 variant = 0.8mm Nozzle
 
 [values]
-wall_thickness = =line_width*3
+wall_thickness = =line_width*2
+adhesion_type = brim

resources/quality/flyingbear/flyingbear_global_0.08_ultra.inst.cfg

@@ -14,5 +14,5 @@ global_quality = True
 layer_height = 0.08
 layer_height_0 = 0.12
 top_bottom_thickness = =layer_height_0+layer_height*10
-wall_thickness = =line_width*3
+wall_thickness = =line_width*6
 support_interface_height = =layer_height*12

resources/quality/flyingbear/flyingbear_global_0.12_super.inst.cfg

@@ -12,7 +12,7 @@ global_quality = True
 
 [values]
 layer_height = 0.12
-layer_height_0 = 0.12
+layer_height_0 = 0.16
 top_bottom_thickness = =layer_height_0+layer_height*6
-wall_thickness = =line_width*3
+wall_thickness = =line_width*6
 support_interface_height = =layer_height*8

resources/quality/flyingbear/flyingbear_global_0.16_adaptive.inst.cfg

@@ -14,6 +14,6 @@ global_quality = True
 layer_height = 0.16
 layer_height_0 = 0.20
 top_bottom_thickness = =layer_height_0+layer_height*4
-wall_thickness = =line_width*3
+wall_thickness = =line_width*5
 support_interface_height = =layer_height*6
 adaptive_layer_height_enabled = true

resources/quality/flyingbear/flyingbear_global_0.20_standard.inst.cfg

@@ -11,8 +11,8 @@ weight = -3
 global_quality = True
 
 [values]
-layer_height = 0.2
+layer_height = 0.20
-layer_height_0 = 0.2
+layer_height_0 = 0.20
 top_bottom_thickness = =layer_height_0+layer_height*3
-wall_thickness = =line_width*3
+wall_thickness = =line_width*4
 support_interface_height = =layer_height*5

resources/quality/flyingbear/flyingbear_global_0.28_low.inst.cfg

@@ -14,5 +14,5 @@ global_quality = True
 layer_height = 0.28
 layer_height_0 = 0.28
 top_bottom_thickness = =layer_height_0+layer_height*3
-wall_thickness = =line_width*2
+wall_thickness = =line_width*3
 support_interface_height = =layer_height*4

resources/quality/flyingbear/flyingbear_global_0.32_draft.inst.cfg

@@ -14,5 +14,5 @@ global_quality = True
 layer_height = 0.32
 layer_height_0 = 0.32
 top_bottom_thickness = =layer_height_0+layer_height*3
-wall_thickness = =line_width*2
+wall_thickness = =line_width*3
-support_interface_height = =layer_height*4
+support_interface_height = =layer_height*3

resources/quality/flyingbear/flyingbear_global_0.40_coarse.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Coarse Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = coarse
+weight = -6
+global_quality = True
+
+[values]
+layer_height = 0.40
+layer_height_0 = 0.40
+top_bottom_thickness = =layer_height_0+layer_height*3
+wall_thickness = =line_width*2
+support_interface_height = =layer_height*2

resources/quality/flyingbear/hips/flyingbear_0.25_hips_super.inst.cfg

@@ -12,3 +12,4 @@ variant = 0.25mm Nozzle
 
 [values]
 wall_thickness = =line_width*6
+adhesion_type = brim

resources/quality/flyingbear/hips/flyingbear_0.25_hips_ultra.inst.cfg

@@ -12,3 +12,4 @@ variant = 0.25mm Nozzle
 
 [values]
 wall_thickness = =line_width*6
+adhesion_type = brim

resources/quality/flyingbear/hips/flyingbear_0.30_hips_adaptive.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = adaptive
+material = generic_hips
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*5
+adhesion_type = brim

resources/quality/flyingbear/hips/flyingbear_0.30_hips_standard.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Standard Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+material = generic_hips
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*5
+adhesion_type = brim

resources/quality/flyingbear/hips/flyingbear_0.30_hips_super.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Super Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = super
+material = generic_hips
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*5
+adhesion_type = brim

resources/quality/flyingbear/hips/flyingbear_0.40_hips_adaptive.inst.cfg

@@ -12,3 +12,4 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+adhesion_type = brim

resources/quality/flyingbear/hips/flyingbear_0.40_hips_low.inst.cfg

@@ -12,3 +12,4 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+adhesion_type = brim

resources/quality/flyingbear/hips/flyingbear_0.40_hips_standard.inst.cfg

@@ -12,3 +12,4 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+adhesion_type = brim

resources/quality/flyingbear/hips/flyingbear_0.40_hips_super.inst.cfg

@@ -12,3 +12,4 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+adhesion_type = brim

resources/quality/flyingbear/hips/flyingbear_0.50_hips_adaptive.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = adaptive
+material = generic_hips
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+adhesion_type = brim

resources/quality/flyingbear/hips/flyingbear_0.50_hips_draft.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Draft Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = draft
+material = generic_hips
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+adhesion_type = brim

resources/quality/flyingbear/hips/flyingbear_0.50_hips_low.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Low Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = low
+material = generic_hips
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+adhesion_type = brim

resources/quality/flyingbear/hips/flyingbear_0.50_hips_standard.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Standard Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+material = generic_hips
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+adhesion_type = brim

resources/quality/flyingbear/hips/flyingbear_0.60_hips_draft.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Draft Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = draft
+material = generic_hips
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3
+adhesion_type = brim

resources/quality/flyingbear/hips/flyingbear_0.60_hips_low.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Low Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = low
+material = generic_hips
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3
+adhesion_type = brim

resources/quality/flyingbear/hips/flyingbear_0.60_hips_standard.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Standard Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+material = generic_hips
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3
+adhesion_type = brim

resources/quality/flyingbear/hips/flyingbear_0.80_hips_coarse.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Coarse Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = coarse
+material = generic_hips
+variant = 0.8mm Nozzle
+
+[values]
+wall_thickness = =line_width*2
+adhesion_type = brim

resources/quality/flyingbear/hips/flyingbear_0.80_hips_draft.inst.cfg

@@ -11,4 +11,5 @@ material = generic_hips
 variant = 0.8mm Nozzle
 
 [values]
-wall_thickness = =line_width*3
+wall_thickness = =line_width*2
+adhesion_type = brim

resources/quality/flyingbear/petg/flyingbear_0.25_petg_super.inst.cfg

@@ -11,6 +11,5 @@ material = generic_petg
 variant = 0.25mm Nozzle
 
 [values]
-speed_layer_0 = 15
 wall_thickness = =line_width*6
-
+speed_layer_0 = 15

resources/quality/flyingbear/petg/flyingbear_0.25_petg_ultra.inst.cfg

@@ -11,5 +11,5 @@ material = generic_petg
 variant = 0.25mm Nozzle
 
 [values]
-speed_layer_0 = 15
 wall_thickness = =line_width*6
+speed_layer_0 = 15

resources/quality/flyingbear/petg/flyingbear_0.30_petg_adaptive.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = adaptive
+material = generic_petg
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*5
+speed_layer_0 = 15

resources/quality/flyingbear/petg/flyingbear_0.30_petg_standard.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Standard Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+material = generic_petg
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*5
+speed_layer_0 = 15

resources/quality/flyingbear/petg/flyingbear_0.30_petg_super.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Super Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = super
+material = generic_petg
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*5
+speed_layer_0 = 15

resources/quality/flyingbear/petg/flyingbear_0.40_petg_adaptive.inst.cfg

@@ -11,5 +11,5 @@ material = generic_petg
 variant = 0.4mm Nozzle
 
 [values]
-speed_layer_0 = 15
 wall_thickness = =line_width*4
+speed_layer_0 = 15

resources/quality/flyingbear/petg/flyingbear_0.40_petg_low.inst.cfg

@@ -11,5 +11,5 @@ material = generic_petg
 variant = 0.4mm Nozzle
 
 [values]
-speed_layer_0 = 15
 wall_thickness = =line_width*4
+speed_layer_0 = 15

resources/quality/flyingbear/petg/flyingbear_0.40_petg_standard.inst.cfg

@@ -11,5 +11,5 @@ material = generic_petg
 variant = 0.4mm Nozzle
 
 [values]
-speed_layer_0 = 15
 wall_thickness = =line_width*4
+speed_layer_0 = 15

resources/quality/flyingbear/petg/flyingbear_0.40_petg_super.inst.cfg

@@ -11,5 +11,5 @@ material = generic_petg
 variant = 0.4mm Nozzle
 
 [values]
-speed_layer_0 = 15
 wall_thickness = =line_width*4
+speed_layer_0 = 15

resources/quality/flyingbear/petg/flyingbear_0.50_petg_adaptive.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = adaptive
+material = generic_petg
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+speed_layer_0 = 15

resources/quality/flyingbear/petg/flyingbear_0.50_petg_draft.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Draft Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = draft
+material = generic_petg
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+speed_layer_0 = 15

resources/quality/flyingbear/petg/flyingbear_0.50_petg_low.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Low Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = low
+material = generic_petg
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+speed_layer_0 = 15

resources/quality/flyingbear/petg/flyingbear_0.50_petg_standard.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Standard Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+material = generic_petg
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+speed_layer_0 = 15

resources/quality/flyingbear/petg/flyingbear_0.60_petg_draft.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Draft Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = draft
+material = generic_petg
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3
+speed_layer_0 = 15

resources/quality/flyingbear/petg/flyingbear_0.60_petg_low.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Low Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = low
+material = generic_petg
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3
+speed_layer_0 = 15

resources/quality/flyingbear/petg/flyingbear_0.60_petg_standard.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Standard Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+material = generic_petg
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3
+speed_layer_0 = 15

resources/quality/flyingbear/petg/flyingbear_0.80_petg_coarse.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Coarse Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = coarse
+material = generic_petg
+variant = 0.8mm Nozzle
+
+[values]
+wall_thickness = =line_width*2
+speed_layer_0 = 15

resources/quality/flyingbear/petg/flyingbear_0.80_petg_draft.inst.cfg

@@ -11,5 +11,5 @@ material = generic_petg
 variant = 0.8mm Nozzle
 
 [values]
+wall_thickness = =line_width*2
 speed_layer_0 = 15
-wall_thickness = =line_width*3

resources/quality/flyingbear/pla/flyingbear_0.30_pla_adaptive.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = adaptive
+material = generic_pla
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*5

resources/quality/flyingbear/pla/flyingbear_0.30_pla_standard.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Standard Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+material = generic_pla
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*5

resources/quality/flyingbear/pla/flyingbear_0.30_pla_super.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Super Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = super
+material = generic_pla
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*5

resources/quality/flyingbear/pla/flyingbear_0.50_pla_adaptive.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = adaptive
+material = generic_pla
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/pla/flyingbear_0.50_pla_draft.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Draft Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = draft
+material = generic_pla
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/pla/flyingbear_0.50_pla_low.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Low Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = low
+material = generic_pla
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/pla/flyingbear_0.50_pla_standard.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Standard Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+material = generic_pla
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/pla/flyingbear_0.60_pla_draft.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Draft Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = draft
+material = generic_pla
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3

resources/quality/flyingbear/pla/flyingbear_0.60_pla_low.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Low Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = low
+material = generic_pla
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3

resources/quality/flyingbear/pla/flyingbear_0.60_pla_standard.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Standard Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+material = generic_pla
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3

resources/quality/flyingbear/pla/flyingbear_0.80_pla_coarse.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Coarse Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = coarse
+material = generic_pla
+variant = 0.8mm Nozzle
+
+[values]
+wall_thickness = =line_width*2

resources/quality/flyingbear/pla/flyingbear_0.80_pla_draft.inst.cfg

@@ -11,4 +11,4 @@ material = generic_pla
 variant = 0.8mm Nozzle
 
 [values]
-wall_thickness = =line_width*3
+wall_thickness = =line_width*2

resources/quality/flyingbear/plapro/flyingbear_0.30_plapro_adaptive.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = adaptive
+material = eSUN_PLA_PRO_Black
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*5

resources/quality/flyingbear/plapro/flyingbear_0.30_plapro_standard.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Standard Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+material = eSUN_PLA_PRO_Black
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*5

resources/quality/flyingbear/plapro/flyingbear_0.30_plapro_super.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Super Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = super
+material = eSUN_PLA_PRO_Black
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*5

resources/quality/flyingbear/plapro/flyingbear_0.50_plapro_adaptive.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = adaptive
+material = eSUN_PLA_PRO_Black
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/plapro/flyingbear_0.50_plapro_draft.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Draft Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = draft
+material = eSUN_PLA_PRO_Black
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/plapro/flyingbear_0.50_plapro_low.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Low Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = low
+material = eSUN_PLA_PRO_Black
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/plapro/flyingbear_0.50_plapro_standard.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Standard Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+material = eSUN_PLA_PRO_Black
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/plapro/flyingbear_0.60_plapro_draft.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Draft Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = draft
+material = eSUN_PLA_PRO_Black
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3

resources/quality/flyingbear/plapro/flyingbear_0.60_plapro_low.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Low Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = low
+material = eSUN_PLA_PRO_Black
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3

resources/quality/flyingbear/plapro/flyingbear_0.60_plapro_standard.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Standard Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+material = eSUN_PLA_PRO_Black
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3

resources/quality/flyingbear/plapro/flyingbear_0.80_plapro_coarse.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Coarse Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = coarse
+material = eSUN_PLA_PRO_Black
+variant = 0.8mm Nozzle
+
+[values]
+wall_thickness = =line_width*2

resources/quality/flyingbear/plapro/flyingbear_0.80_plapro_draft.inst.cfg

@@ -11,4 +11,4 @@ material = eSUN_PLA_PRO_Black
 variant = 0.8mm Nozzle
 
 [values]
-wall_thickness = =line_width*3
+wall_thickness = =line_width*2

resources/quality/flyingbear/tpu/flyingbear_0.40_tpu_adaptive.inst.cfg

@@ -12,3 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+speed_print = 20
+speed_layer_0 = 10

resources/quality/flyingbear/tpu/flyingbear_0.40_tpu_low.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Low Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = low
+material = generic_tpu
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+speed_print = 20
+speed_layer_0 = 10

resources/quality/flyingbear/tpu/flyingbear_0.40_tpu_standard.inst.cfg

@@ -12,3 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+speed_print = 20
+speed_layer_0 = 10

resources/quality/flyingbear/tpu/flyingbear_0.40_tpu_super.inst.cfg

@@ -12,3 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+speed_print = 20
+speed_layer_0 = 10

resources/quality/flyingbear/tpu/flyingbear_0.50_tpu_adaptive.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = adaptive
+material = generic_tpu
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+speed_print = 20
+speed_layer_0 = 10

resources/quality/flyingbear/tpu/flyingbear_0.50_tpu_draft.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Draft Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = draft
+material = generic_tpu
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+speed_print = 20
+speed_layer_0 = 10

resources/quality/flyingbear/tpu/flyingbear_0.50_tpu_low.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Low Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = low
+material = generic_tpu
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+speed_print = 20
+speed_layer_0 = 10

resources/quality/flyingbear/tpu/flyingbear_0.50_tpu_standard.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Standard Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+material = generic_tpu
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+speed_print = 20
+speed_layer_0 = 10

resources/quality/flyingbear/tpu/flyingbear_0.60_tpu_draft.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Draft Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = draft
+material = generic_tpu
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3
+speed_print = 20
+speed_layer_0 = 10

resources/quality/flyingbear/tpu/flyingbear_0.60_tpu_low.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Low Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = low
+material = generic_tpu
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3
+speed_print = 20
+speed_layer_0 = 10

resources/quality/flyingbear/tpu/flyingbear_0.60_tpu_standard.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Standard Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+material = generic_tpu
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3
+speed_print = 20
+speed_layer_0 = 10

resources/quality/flyingbear/tpu/flyingbear_0.80_tpu_coarse.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Coarse Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = coarse
+material = generic_tpu
+variant = 0.8mm Nozzle
+
+[values]
+wall_thickness = =line_width*2
+speed_print = 20
+speed_layer_0 = 10

resources/quality/flyingbear/tpu/flyingbear_0.80_tpu_draft.inst.cfg

@@ -11,4 +11,6 @@ material = generic_tpu
 variant = 0.8mm Nozzle
 
 [values]
-wall_thickness = =line_width*3
+wall_thickness = =line_width*2
+speed_print = 20
+speed_layer_0 = 10