diff --git a/resources/definitions/skriware_2.def.json b/resources/definitions/skriware_2.def.json
index 32572e7803..8624c1d19f 100644
--- a/resources/definitions/skriware_2.def.json
+++ b/resources/definitions/skriware_2.def.json
@@ -21,1783 +21,707 @@
 		}
 	},
   "overrides": {
-    "cross_infill_pocket_size": {
-      "value": "5.333333333333333"
+    "raft_interface_thickness": {
+      "value": "0.2"
     },
-    "support_roof_pattern": {
-      "value": "concentric"
+    "wipe_retraction_prime_speed": {
+      "value": "30"
     },
-    "spaghetti_infill_stepped": {
+    "support_skip_zag_per_mm": {
+      "default_value": 10
+    },
+    "material_bed_temperature": {
+      "value": "50"
+    },
+    "raft_airgap": {
+      "default_value": 0.2
+    },
+    "top_layers": {
+      "value": "4"
+    },
+    "machine_extruder_count": {
+      "default_value": 2
+    },
+    "raft_surface_acceleration": {
+      "value": "400"
+    },
+    "meshfix_maximum_travel_resolution": {
+      "value": "0.8"
+    },
+    "machine_end_gcode": {
+      "default_value": "M59\nG92 E0\nG1 E-10 F300\nM104 T0 S0\nM104 T1 S0\nM140 S0\nG28 X0 Y0\nM84\nM106 S0\nM107"
+    },
+    "wall_material_flow": {
+      "value": "99"
+    },
+    "raft_interface_jerk": {
+      "value": "10"
+    },
+    "acceleration_topbottom": {
+      "value": "400"
+    },
+    "prime_tower_size": {
+      "default_value": 1
+    },
+    "max_skin_angle_for_expansion": {
+      "default_value": 50
+    },
+    "raft_acceleration": {
+      "value": "400"
+    },
+    "support_xy_distance": {
+      "default_value": 0.6
+    },
+    "xy_offset_layer_0": {
+      "value": "-0.16"
+    },
+    "raft_interface_fan_speed": {
+      "value": "40"
+    },
+    "retraction_speed": {
+      "default_value": 30
+    },
+    "speed_print": {
+      "default_value": 20
+    },
+    "travel_avoid_supports": {
       "default_value": true
     },
-    "coasting_speed": {
-      "default_value": 90
+    "infill_overlap_mm": {
+      "value": "0.0"
     },
-    "wipe_retraction_speed": {
+    "support_roof_height": {
+      "value": "0.4"
+    },
+    "speed_travel_layer_0": {
+      "value": "120"
+    },
+    "speed_wall_0": {
+      "value": "20"
+    },
+    "acceleration_wall_x": {
+      "value": "400"
+    },
+    "layer_0_z_overlap": {
+      "value": "0.1"
+    },
+    "switch_extruder_retraction_speed": {
+      "value": "30"
+    },
+    "travel_compensate_overlapping_walls_enabled": {
+      "default_value": false
+    },
+    "raft_base_acceleration": {
+      "value": "400"
+    },
+    "raft_base_speed": {
+      "value": "60"
+    },
+    "wall_0_material_flow": {
+      "value": "99"
+    },
+    "support_infill_rate": {
+      "value": "20"
+    },
+    "raft_surface_layers": {
+      "default_value": 1
+    },
+    "machine_height": {
+      "default_value": 210
+    },
+    "retraction_prime_speed": {
+      "value": "60"
+    },
+    "support_interface_material_flow": {
+      "value": "99"
+    },
+    "raft_surface_fan_speed": {
+      "value": "80"
+    },
+    "raft_base_line_width": {
+      "value": "0.4"
+    },
+    "infill_line_distance": {
+      "value": "5.33"
+    },
+    "default_material_print_temperature": {
+      "default_value": 200
+    },
+    "speed_roofing": {
+      "value": "20"
+    },
+    "skin_material_flow": {
+      "value": "99"
+    },
+    "cool_fan_full_layer": {
+      "value": "1"
+    },
+    "material_break_preparation_temperature": {
+      "value": "195"
+    },
+    "support_roof_density": {
+      "value": "70"
+    },
+    "support_infill_sparse_thickness": {
+      "value": "0.2"
+    },
+    "retraction_retract_speed": {
+      "value": "30"
+    },
+    "speed_slowdown_layers": {
+      "default_value": 1
+    },
+    "support_line_distance": {
+      "value": "2"
+    },
+    "cool_lift_head": {
+      "default_value": true
+    },
+    "min_skin_width_for_expansion": {
+      "value": "0.67"
+    },
+    "cool_min_speed": {
+      "default_value": 5
+    },
+    "switch_extruder_retraction_speeds": {
+      "default_value": 30
+    },
+    "raft_base_line_spacing": {
+      "value": "0.8"
+    },
+    "speed_support": {
+      "value": "50"
+    },
+    "skirt_brim_material_flow": {
+      "value": "99"
+    },
+    "speed_infill": {
+      "value": "80"
+    },
+    "support_initial_layer_line_distance": {
+      "value": "2"
+    },
+    "support_use_towers": {
+      "default_value": false
+    },
+    "skin_no_small_gaps_heuristic": {
+      "default_value": true
+    },
+    "acceleration_roofing": {
+      "value": "400"
+    },
+    "material_initial_print_temperature": {
+      "value": "195"
+    },
+    "material_diameter": {
+      "default_value": 1.75
+    },
+    "xy_offset": {
+      "default_value": -0.16
+    },
+    "support_extruder_nr": {
+      "value": "0"
+    },
+    "support_brim_line_count": {
+      "value": "16"
+    },
+    "support_interface_extruder_nr": {
+      "value": "0"
+    },
+    "support_roof_extruder_nr": {
+      "value": "0"
+    },
+    "material_adhesion_tendency": {
+      "default_value": 0
+    },
+    "material_standby_temperature": {
+      "default_value": 195
+    },
+    "cool_fan_speed_0": {
+      "default_value": 100
+    },
+    "brim_line_count": {
+      "value": "17"
+    },
+    "adhesion_type": {
+      "default_value": "raft"
+    },
+    "switch_extruder_retraction_amount": {
+      "value": "16"
+    },
+    "retraction_amount": {
+      "default_value": 3
+    },
+    "acceleration_travel": {
+      "value": "400"
+    },
+    "jerk_print_layer_0": {
+      "value": "10"
+    },
+    "raft_surface_thickness": {
+      "value": "0.2"
+    },
+    "raft_base_jerk": {
+      "value": "10"
+    },
+    "bottom_thickness": {
+      "value": "0.8"
+    },
+    "roofing_material_flow": {
+      "value": "99"
+    },
+    "top_skin_expand_distance": {
+      "value": "0.8"
+    },
+    "speed_wall_x": {
+      "value": "20"
+    },
+    "support_enable": {
+      "default_value": true
+    },
+    "acceleration_print_layer_0": {
+      "value": "400"
+    },
+    "jerk_prime_tower": {
+      "value": "5"
+    },
+    "infill_before_walls": {
+      "default_value": false
+    },
+    "raft_interface_line_spacing": {
+      "value": "0.4"
+    },
+    "gantry_height": {
+      "value": "210"
+    },
+    "material_print_temperature_layer_0": {
+      "value": "195"
+    },
+    "raft_interface_line_width": {
+      "value": "0.4"
+    },
+    "skirt_brim_line_width": {
+      "value": "0.5"
+    },
+    "z_seam_y": {
+      "value": "180"
+    },
+    "roofing_layer_count": {
+      "value": "1"
+    },
+    "raft_margin": {
+      "default_value": 4
+    },
+    "cool_fan_full_at_height": {
+      "value": "0"
+    },
+    "acceleration_support_interface": {
+      "value": "250"
+    },
+    "retraction_min_travel": {
+      "value": "1"
+    },
+    "acceleration_layer_0": {
+      "value": "400"
+    },
+    "support_z_distance": {
+      "default_value": 0.2
+    },
+    "machine_heated_bed": {
+      "default_value": true
+    },
+    "raft_jerk": {
+      "value": "10"
+    },
+    "raft_surface_speed": {
+      "value": "60"
+    },
+    "initial_layer_line_width_factor": {
+      "default_value": 120
+    },
+    "machine_start_gcode": {
+      "default_value": "G90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM420 S1 Z0.6 ;enable bed levelling\nG1 Z10 F250 ;move the platform down 10mm\nM107 ;fan off\nM42 P11 S255 ;turn on front fan\nM140 S{material_bed_temperature}\nM104 T0 S{material_print_temperature, 0}\nM104 T1 S{material_print_temperature, 1}\nG1 F2500 Y260 X0\nM190 S{material_bed_temperature}\nM109 T0 S{material_print_temperature, 0}\nM109 T1 S{material_print_temperature, 1}\nM60 ;enable E-FADE Algorithm\nM62 A ;filament sensor off\nG92 E0 ;zero the extruded length\nT1\nG92 E0;zero the extruded length\nG1 F300 Z0.3\nG1 F1200 X20\nG1 F1200 X180 E21 ;extrude 21 mm of feed stock\nG1 F1200 E15 ;retracting 6 mm\nG1 F2000 E21\nG1 F2000 E11\nG1 F300 Z1.5\nG92 E0 ;zero the extruded length again\nT0\nG92 E0 ;zero the extruded length\nG1 F1200 Y258\nG1 F300 Z0.3\nG1 F1200 X40 E21 ;extrude 21 mm of feed stock\nG1 F1200 E15 ;retracting 6 mm\nG1 F2000 E21\nG1 F2000 E11\nG1 Z1.5\nM61 A ;filament sensor reset\nM63 A ;filament sensor on\nG92 E0 ;zero the extruded length again\nM58 ;end of Start G-Code and signal retract management\nT{initial_extruder_nr}"
+    },
+    "bottom_skin_preshrink": {
+      "value": "0.8"
+    },
+    "ironing_inset": {
+      "value": "0.2"
+    },
+    "jerk_travel": {
+      "value": "10"
+    },
+    "machine_depth": {
+      "default_value": 260
+    },
+    "jerk_skirt_brim": {
+      "value": "5"
+    },
+    "infill_wipe_dist": {
+      "value": "0"
+    },
+    "raft_interface_acceleration": {
+      "value": "400"
+    },
+    "z_seam_x": {
+      "value": "115"
+    },
+    "material_print_temperature": {
+      "value": "195"
+    },
+    "material_bed_temperature_layer_0": {
+      "value": "50"
+    },
+    "wipe_retraction_retract_speed": {
       "value": "30"
     },
     "jerk_travel_layer_0": {
       "value": "10"
     },
-    "wipe_repeat_count": {
-      "default_value": 5
-    },
-    "experimental": {
-      "default_value": 0
-    },
-    "mold_roof_height": {
-      "default_value": 0.5
-    },
-    "multiple_mesh_overlap": {
-      "default_value": 0
-    },
-    "skirt_brim_minimal_length": {
-      "default_value": 50
-    },
-    "meshfix_maximum_travel_resolution": {
-      "value": "0.8"
-    },
-    "support_bottom_stair_step_height": {
-      "default_value": 0.3
-    },
-    "wall_min_flow": {
-      "default_value": 0
-    },
-    "wireframe_roof_drag_along": {
-      "default_value": 0.8
-    },
-    "infill_angles": {
-      "default_value": "[ ]"
-    },
-    "bottom_skin_expand_distance": {
-      "value": "0.8"
-    },
-    "support_skip_some_zags": {
-      "default_value": true
-    },
-    "material": {
-      "default_value": 0
-    },
-    "machine_feeder_wheel_diameter": {
-      "default_value": 10.0
-    },
-    "material_break_preparation_retracted_position": {
-      "default_value": -16
-    },
-    "optimize_wall_printing_order": {
-      "default_value": true
-    },
-    "layer_height_0": {
-      "default_value": 0.2
-    },
-    "magic_fuzzy_skin_point_density": {
-      "default_value": 1.25
-    },
-    "speed_layer_0": {
-      "value": "10.0"
-    },
-    "infill_pattern": {
-      "value": "grid"
-    },
-    "xy_offset": {
-      "default_value": -0.16
-    },
-    "bridge_fan_speed_3": {
-      "default_value": 0
-    },
-    "machine_max_feedrate_x": {
-      "default_value": 299792458000
-    },
-    "machine_heated_bed": {
-      "default_value": true
-    },
-    "wireframe_roof_fall_down": {
-      "default_value": 2
-    },
-    "adaptive_layer_height_variation": {
-      "default_value": 0.1
-    },
-    "expand_skins_expand_distance": {
-      "value": "0.8"
-    },
-    "magic_mesh_surface_mode": {
-      "default_value": "normal"
-    },
-    "support_bottom_density": {
-      "value": "100"
-    },
-    "acceleration_travel_layer_0": {
-      "value": "400"
-    },
-    "raft_speed": {
-      "value": "60"
-    },
-    "material_final_print_temperature": {
-      "value": "195"
-    },
-    "material_print_temp_wait": {
-      "default_value": true
-    },
-    "support_brim_line_count": {
-      "value": "16"
-    },
-    "acceleration_layer_0": {
-      "value": "400"
-    },
-    "cross_support_density_image": {
-      "default_value": ""
-    },
-    "material_flow_dependent_temperature": {
-      "default_value": false
-    },
-    "raft_interface_thickness": {
-      "value": "0.2"
-    },
-    "support_use_towers": {
-      "default_value": false
-    },
-    "bridge_skin_material_flow_2": {
-      "default_value": 100
-    },
-    "support_tree_enable": {
-      "default_value": false
-    },
-    "raft_interface_line_width": {
-      "value": "0.4"
-    },
-    "wireframe_top_delay": {
-      "default_value": 0
-    },
-    "jerk_support_infill": {
-      "value": "10"
-    },
-    "filter_out_tiny_gaps": {
-      "default_value": true
-    },
-    "initial_layer_line_width_factor": {
-      "default_value": 120
-    },
-    "bridge_wall_speed": {
-      "value": "10.0"
-    },
-    "acceleration_wall": {
-      "value": "400"
-    },
-    "machine_heat_zone_length": {
-      "default_value": 16
-    },
-    "travel_avoid_distance": {
-      "value": "0.625"
-    },
-    "brim_outside_only": {
-      "default_value": true
-    },
-    "bridge_skin_material_flow_3": {
-      "default_value": 110
-    },
-    "prime_tower_position_y": {
-      "value": "1"
-    },
-    "meshfix_keep_open_polygons": {
-      "default_value": false
-    },
-    "retraction_combing_max_distance": {
-      "default_value": 0
-    },
-    "jerk_support_bottom": {
-      "value": "5"
-    },
-    "infill_line_width": {
-      "value": "0.4"
-    },
-    "wipe_hop_enable": {
-      "value": "False"
-    },
-    "acceleration_enabled": {
-      "default_value": true
-    },
-    "support_roof_enable": {
-      "value": "False"
-    },
-    "speed_roofing": {
-      "value": "20"
-    },
-    "z_seam_type": {
-      "default_value": "sharpest_corner"
-    },
-    "prime_tower_wipe_enabled": {
-      "default_value": true
-    },
-    "small_hole_max_size": {
-      "default_value": 0
-    },
-    "material_anti_ooze_retraction_speed": {
-      "default_value": 5
-    },
-    "wall_line_count": {
-      "value": "2"
-    },
-    "mold_width": {
-      "default_value": 5
-    },
-    "wireframe_printspeed_flat": {
-      "value": "5"
-    },
-    "extruders_enabled_count": {
-      "value": "2"
-    },
-    "jerk_prime_tower": {
-      "value": "5"
-    },
-    "wipe_brush_pos_x": {
-      "default_value": 100
-    },
-    "wireframe_nozzle_clearance": {
-      "default_value": 1
-    },
-    "support_infill_extruder_nr": {
-      "value": "0"
-    },
-    "acceleration_skirt_brim": {
-      "value": "250"
-    },
-    "speed_support_infill": {
-      "value": "80"
-    },
-    "skirt_brim_speed": {
-      "value": "10.0"
-    },
-    "acceleration_support_roof": {
-      "value": "250"
-    },
-    "initial_bottom_layers": {
-      "value": "3"
-    },
-    "min_infill_area": {
-      "default_value": 1
-    },
-    "material_print_temp_prepend": {
-      "default_value": true
-    },
-    "speed_wall_x": {
-      "value": "20"
-    },
-    "speed": {
-      "default_value": 0
-    },
-    "skin_angles": {
-      "default_value": "[ ]"
-    },
-    "machine_minimum_feedrate": {
-      "default_value": 0.0
-    },
-    "min_skin_width_for_expansion": {
-      "value": "0.671279704941824"
-    },
-    "machine_max_acceleration_e": {
-      "default_value": 10000
-    },
-    "carve_multiple_volumes": {
-      "value": "True"
-    },
-    "prime_tower_line_width": {
-      "value": "0.4"
-    },
-    "top_bottom_pattern": {
-      "default_value": "lines"
-    },
-    "platform_adhesion": {
-      "default_value": 0
-    },
-    "infill_support_angle": {
-      "default_value": 40
-    },
-    "jerk_support_roof": {
-      "value": "5"
-    },
-    "ironing_only_highest_layer": {
-      "default_value": false
-    },
-    "support_bottom_material_flow": {
-      "value": "99"
-    },
-    "ironing_line_spacing": {
-      "default_value": 0.1
-    },
-    "bridge_skin_density_2": {
-      "default_value": 75
-    },
-    "support_conical_min_width": {
-      "default_value": 5.0
-    },
-    "machine_max_feedrate_y": {
-      "default_value": 299792458000
-    },
-    "gradual_support_infill_step_height": {
-      "default_value": 1
-    },
     "infill_overlap": {
       "value": "0"
     },
-    "raft_surface_fan_speed": {
-      "value": "80"
-    },
-    "retraction_combing": {
-      "default_value": "infill"
-    },
-    "speed_support_interface": {
-      "value": "33.333333333333336"
-    },
-    "wall_x_extruder_nr": {
-      "value": "-1"
-    },
-    "cool_fan_full_layer": {
-      "value": "1"
-    },
-    "wireframe_enabled": {
-      "default_value": false
-    },
-    "bottom_layers": {
-      "value": "3"
-    },
-    "support_bottom_extruder_nr": {
-      "value": "0"
-    },
-    "spaghetti_flow": {
-      "default_value": 20
-    },
-    "speed_wall_0": {
-      "value": "20"
-    },
-    "machine_end_gcode": {
-      "default_value": "M59\nG92 E0\nG1 E-10 F300\nM104 T0 S0\nM104 T1 S0\nM140 S0\nG28 X0 Y0\nM84\nM106 S0\nM107"
-    },
-    "material_bed_temp_wait": {
-      "default_value": true
-    },
-    "bridge_enable_more_layers": {
-      "default_value": true
-    },
-    "brim_gap": {
-      "default_value": 0
-    },
-    "infill_extruder_nr": {
-      "default_value": "-1"
-    },
-    "jerk_travel": {
-      "value": "10"
-    },
-    "wall_thickness": {
-      "value": "1.2"
-    },
-    "machine_head_with_fans_polygon": {
-      "default_value": [
-        [
-          -20,
-          10
-        ],
-        [
-          10,
-          10
-        ],
-        [
-          10,
-          -10
-        ],
-        [
-          -20,
-          -10
-        ]
-      ]
-    },
-    "material_standby_temperature": {
-      "default_value": 195
-    },
-    "ironing_inset": {
-      "value": "0.2"
-    },
-    "extruder_prime_pos_abs": {
-      "default_value": false
-    },
-    "switch_extruder_extra_prime_amount": {
-      "default_value": 0
-    },
-    "mesh_position_y": {
-      "default_value": 0
-    },
-    "z_seam_x": {
-      "value": "115"
-    },
-    "infill_wall_line_count": {
-      "default_value": 0
-    },
-    "support_bottom_angles": {
-      "value": "[ ]"
-    },
-    "raft_surface_thickness": {
-      "value": "0.2"
-    },
-    "support_brim_enable": {
-      "default_value": false
-    },
-    "jerk_enabled": {
-      "default_value": true
-    },
-    "meshfix_union_all": {
-      "value": "True"
-    },
-    "speed_support_roof": {
-      "value": "33.333333333333336"
-    },
-    "machine_max_jerk_z": {
-      "default_value": 0.4
-    },
-    "bridge_skin_material_flow": {
-      "default_value": 60
-    },
-    "support_roof_height": {
-      "value": "0.4"
-    },
-    "machine_width": {
-      "default_value": 210
-    },
-    "support_interface_pattern": {
-      "default_value": "concentric"
-    },
-    "retraction_hop_enabled": {
-      "default_value": false
-    },
-    "support_join_distance": {
-      "default_value": 2.0
-    },
-    "ironing_flow": {
-      "default_value": 10.0
-    },
-    "retraction_amount": {
-      "default_value": 3
-    },
-    "spaghetti_inset": {
-      "default_value": 0.2
-    },
-    "skin_no_small_gaps_heuristic": {
-      "default_value": true
-    },
-    "machine_endstop_positive_direction_x": {
-      "default_value": false
-    },
-    "support_zag_skip_count": {
-      "value": "8"
-    },
-    "spaghetti_infill_enabled": {
-      "default_value": false
-    },
-    "machine_center_is_zero": {
-      "default_value": false
-    },
-    "magic_spiralize": {
-      "default_value": false
-    },
-    "machine_nozzle_tip_outer_diameter": {
-      "default_value": 1
-    },
-    "skirt_brim_line_width": {
-      "value": "0.5"
-    },
-    "machine_max_acceleration_y": {
-      "default_value": 9000
-    },
-    "machine_start_gcode": {
-      "default_value": "G90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM420 S1 Z0.6 ;enable bed levelling\nG1 Z10 F250 ;move the platform down 10mm\nM107 ;fan off\nM42 P11 S255 ;turn on front fan\nM140 S{material_bed_temperature}\nM104 T0 S{material_print_temperature, 0}\nM104 T1 S{material_print_temperature, 1}\nG1 F2500 Y260 X0\nM190 S{material_bed_temperature}\nM109 T0 S{material_print_temperature, 0}\nM109 T1 S{material_print_temperature, 1}\nM60 ;enable E-FADE Algorithm\nM62 A ;filament sensor off\nG92 E0 ;zero the extruded length\nT1\nG92 E0;zero the extruded length\nG1 F300 Z0.3\nG1 F1200 X20\nG1 F1200 X180 E21 ;extrude 21 mm of feed stock\nG1 F1200 E15 ;retracting 6 mm\nG1 F2000 E21\nG1 F2000 E11\nG1 F300 Z1.5\nG92 E0 ;zero the extruded length again\nT0\nG92 E0 ;zero the extruded length\nG1 F1200 Y258\nG1 F300 Z0.3\nG1 F1200 X40 E21 ;extrude 21 mm of feed stock\nG1 F1200 E15 ;retracting 6 mm\nG1 F2000 E21\nG1 F2000 E11\nG1 Z1.5\nM61 A ;filament sensor reset\nM63 A ;filament sensor on\nG92 E0 ;zero the extruded length again\nM58 ;end of Start G-Code and signal retract management\nT{initial_extruder_nr}"
-    },
-    "machine_max_feedrate_z": {
-      "default_value": 299792458000
-    },
-    "support_bottom_pattern": {
-      "value": "concentric"
-    },
-    "material_flow": {
-      "default_value": 99
-    },
-    "alternate_carve_order": {
-      "default_value": true
-    },
-    "gantry_height": {
-      "value": "210"
-    },
-    "infill_before_walls": {
-      "default_value": false
-    },
-    "raft_smoothing": {
-      "default_value": 5
-    },
-    "bridge_wall_coast": {
-      "default_value": 100
-    },
-    "cooling": {
-      "default_value": 0
-    },
-    "support_angle": {
-      "default_value": 60
-    },
-    "spaghetti_max_height": {
-      "default_value": 2.0
-    },
-    "minimum_bottom_area": {
-      "value": "1.0"
-    },
-    "conical_overhang_enabled": {
-      "default_value": false
-    },
-    "retraction_extrusion_window": {
-      "value": "3"
-    },
-    "raft_interface_speed": {
-      "value": "60"
-    },
-    "support_roof_line_width": {
-      "value": "0.4"
-    },
-    "support_offset": {
-      "default_value": 0.2
-    },
-    "machine_heated_build_volume": {
-      "default_value": false
-    },
-    "roofing_pattern": {
-      "value": "lines"
-    },
-    "raft_margin": {
-      "default_value": 4
-    },
-    "travel_avoid_other_parts": {
-      "default_value": true
-    },
-    "support_infill_rate": {
-      "value": "20"
-    },
-    "layer_start_y": {
-      "default_value": 0.0
-    },
-    "support_interface_enable": {
-      "default_value": false
-    },
-    "top_bottom_pattern_0": {
-      "value": "lines"
-    },
-    "support_infill_angles": {
-      "default_value": "[ ]"
-    },
-    "support_tower_maximum_supported_diameter": {
-      "default_value": 3.0
-    },
-    "machine_extruder_count": {
-      "default_value": 2
-    },
-    "infill_mesh_order": {
-      "value": "0"
-    },
-    "material_flow_temp_graph": {
-      "default_value": "[[3.5,200],[7.0,240]]"
-    },
-    "wireframe_printspeed_down": {
-      "value": "5"
-    },
-    "remove_empty_first_layers": {
-      "default_value": false
-    },
-    "slicing_tolerance": {
-      "default_value": "middle"
-    },
-    "material_shrinkage_percentage": {
-      "default_value": 0
-    },
-    "skin_line_width": {
-      "value": "0.4"
-    },
-    "brim_line_count": {
-      "value": "17"
-    },
-    "layer_height": {
-      "default_value": 0.2
-    },
-    "cool_lift_head": {
-      "default_value": true
-    },
-    "cool_min_layer_time": {
-      "default_value": 5
-    },
-    "machine_gcode_flavor": {
-      "default_value": "RepRap (Marlin/Sprinter)"
-    },
-    "skirt_gap": {
-      "default_value": 3
-    },
-    "adhesion_extruder_nr": {
-      "value": "0"
-    },
-    "z_seam_y": {
-      "value": "180"
-    },
-    "material_crystallinity": {
-      "default_value": false
-    },
-    "support_bottom_height": {
-      "value": "1"
-    },
-    "material_guid": {
-      "default_value": "0ff92885-617b-4144-a03c-9989872454bc"
-    },
-    "line_width": {
-      "value": "0.4"
-    },
-    "wipe_hop_amount": {
-      "value": "1"
-    },
-    "material_no_load_move_factor": {
-      "default_value": 0.940860215
-    },
-    "support_xy_overrides_z": {
-      "default_value": "z_overrides_xy"
-    },
-    "support_interface_line_width": {
-      "value": "0.4"
-    },
-    "skin_overlap_mm": {
-      "value": "0.06"
-    },
-    "machine_max_jerk_xy": {
-      "default_value": 20.0
-    },
-    "speed_slowdown_layers": {
-      "default_value": 1
-    },
-    "wireframe_flow_flat": {
-      "value": "100"
-    },
-    "raft_airgap": {
-      "default_value": 0.2
-    },
-    "machine_acceleration": {
-      "default_value": 4000
-    },
-    "small_feature_speed_factor": {
-      "default_value": 50
-    },
-    "support_roof_line_distance": {
-      "value": "0.5714285714285714"
-    },
-    "sub_div_rad_add": {
-      "value": "0.4"
-    },
-    "jerk_support_interface": {
-      "value": "5"
-    },
-    "wall_overhang_angle": {
-      "default_value": 90
-    },
-    "machine_nozzle_temp_enabled": {
-      "value": "True"
-    },
-    "retraction_hop_only_when_collides": {
-      "default_value": false
-    },
-    "machine_nozzle_head_distance": {
-      "default_value": 3
-    },
-    "prime_blob_enable": {
-      "default_value": false
-    },
-    "bridge_settings_enabled": {
-      "default_value": false
-    },
-    "speed_travel": {
-      "value": "120"
-    },
-    "raft_base_line_width": {
-      "value": "0.4"
-    },
-    "material_anti_ooze_retracted_position": {
-      "default_value": -4
-    },
-    "command_line_settings": {
-      "default_value": 0
-    },
-    "connect_infill_polygons": {
-      "value": "False"
-    },
-    "support_interface_material_flow": {
-      "value": "99"
-    },
-    "magic_fuzzy_skin_thickness": {
-      "default_value": 0.3
-    },
-    "z_seam_position": {
-      "default_value": "back"
-    },
-    "wipe_retraction_retract_speed": {
-      "value": "30"
-    },
-    "machine_max_feedrate_e": {
-      "default_value": 299792458000
-    },
-    "wall_material_flow": {
-      "value": "99"
-    },
-    "extruder_prime_pos_x": {
-      "default_value": 0
-    },
-    "top_layers": {
-      "value": "4"
-    },
-    "bridge_fan_speed_2": {
-      "default_value": 0
-    },
-    "bottom_thickness": {
-      "value": "0.8"
-    },
-    "infill_material_flow": {
-      "value": "99"
-    },
-    "support_supported_skin_fan_speed": {
-      "default_value": 100
-    },
-    "wall_0_inset": {
-      "value": "0"
-    },
-    "roofing_material_flow": {
-      "value": "99"
-    },
-    "connect_skin_polygons": {
-      "default_value": false
-    },
-    "bridge_skin_speed": {
-      "value": "15.0"
-    },
-    "support_infill_sparse_thickness": {
-      "value": "resolveOrValue('layer_height')"
-    },
-    "jerk_support": {
-      "value": "10"
-    },
-    "blackmagic": {
-      "default_value": 0
-    },
-    "support_initial_layer_line_distance": {
-      "value": "2"
-    },
-    "retraction_count_max": {
-      "default_value": 30
-    },
-    "skin_overlap": {
-      "value": "15"
-    },
-    "raft_acceleration": {
-      "value": "400"
-    },
     "acceleration_support_infill": {
       "value": "400"
     },
-    "retraction_prime_speed": {
-      "value": "60"
-    },
-    "jerk_infill": {
-      "value": "10"
-    },
-    "cool_fan_speed_max": {
-      "value": "100.0"
-    },
-    "alternate_extra_perimeter": {
-      "default_value": false
-    },
-    "infill_offset_y": {
-      "default_value": 0
-    },
-    "support_pattern": {
-      "default_value": "zigzag"
-    },
-    "wipe_retraction_extra_prime_amount": {
-      "value": "0"
-    },
-    "extruder_nr": {
-      "value": "0"
-    },
-    "bridge_sparse_infill_max_density": {
-      "default_value": 0
-    },
-    "cool_fan_enabled": {
-      "default_value": true
-    },
-    "clean_between_layers": {
-      "default_value": false
-    },
-    "z_seam_corner": {
-      "default_value": "z_seam_corner_weighted"
-    },
-    "prime_tower_min_volume": {
-      "default_value": 4
-    },
-    "top_thickness": {
-      "value": "0.8"
-    },
-    "travel_compensate_overlapping_walls_enabled": {
-      "default_value": false
-    },
-    "draft_shield_enabled": {
-      "default_value": false
-    },
-    "retraction_speed": {
-      "default_value": 30
-    },
-    "acceleration_prime_tower": {
-      "value": "250"
-    },
-    "cool_fan_full_at_height": {
-      "value": "0"
-    },
-    "raft_surface_layers": {
-      "default_value": 1
-    },
-    "resolution": {
-      "default_value": 0
-    },
-    "infill_wipe_dist": {
-      "value": "0"
-    },
-    "machine_disallowed_areas": {
-      "default_value": []
-    },
-    "bridge_fan_speed": {
-      "default_value": 100
-    },
-    "cool_fan_speed_min": {
-      "value": "100.0"
-    },
-    "print_sequence": {
-      "default_value": "all_at_once"
-    },
-    "support_roof_material_flow": {
-      "value": "99"
-    },
-    "switch_extruder_retraction_speed": {
-      "value": "30"
-    },
-    "spaghetti_infill_extra_volume": {
-      "default_value": 0
-    },
-    "jerk_print": {
-      "default_value": 10
-    },
-    "meshfix_maximum_resolution": {
-      "default_value": 0.5
-    },
-    "support": {
-      "default_value": 0
-    },
-    "wireframe_printspeed": {
-      "default_value": 5
-    },
-    "raft_surface_line_width": {
-      "value": "0.4"
-    },
-    "top_skin_expand_distance": {
-      "value": "0.8"
-    },
-    "mold_angle": {
-      "default_value": 40
-    },
-    "speed_infill": {
-      "value": "80"
-    },
-    "machine_max_jerk_e": {
-      "default_value": 5.0
-    },
-    "raft_interface_line_spacing": {
-      "value": "0.4"
-    },
-    "draft_shield_dist": {
-      "default_value": 10
-    },
-    "limit_support_retractions": {
-      "default_value": true
-    },
-    "nozzle_disallowed_areas": {
-      "default_value": []
-    },
-    "meshfix_union_all_remove_holes": {
-      "default_value": false
-    },
-    "wall_line_width_x": {
-      "value": "0.4"
-    },
-    "magic_fuzzy_skin_outside_only": {
-      "default_value": false
-    },
-    "support_conical_angle": {
-      "default_value": 30
-    },
-    "acceleration_topbottom": {
-      "value": "400"
-    },
-    "machine_firmware_retract": {
-      "value": "False"
-    },
-    "jerk_wall_x": {
-      "value": "10"
-    },
-    "raft_interface_jerk": {
-      "value": "10"
-    },
-    "wireframe_top_jump": {
-      "default_value": 0.6
-    },
-    "retraction_hop_after_extruder_switch_height": {
-      "value": "1"
-    },
-    "minimum_roof_area": {
-      "value": "1.0"
-    },
-    "wall_overhang_speed_factor": {
-      "default_value": 100
-    },
-    "small_feature_max_length": {
-      "value": "0.0"
-    },
-    "flow_rate_max_extrusion_offset": {
-      "default_value": 0
-    },
-    "infill_support_enabled": {
-      "default_value": false
-    },
-    "wireframe_roof_inset": {
-      "value": "3"
-    },
-    "support_interface_offset": {
-      "default_value": 0.0
-    },
-    "travel_avoid_supports": {
-      "default_value": true
-    },
-    "raft_fan_speed": {
-      "default_value": 100
-    },
-    "skirt_brim_material_flow": {
-      "value": "99"
-    },
-    "jerk_ironing": {
-      "value": "5"
-    },
-    "default_material_bed_temperature": {
-      "default_value": 60
-    },
-    "roofing_line_width": {
-      "value": "0.4"
-    },
-    "machine_steps_per_mm_x": {
-      "default_value": 50
-    },
-    "build_volume_temperature": {
-      "default_value": 28
-    },
-    "retraction_min_travel": {
-      "value": "1"
-    },
-    "acceleration_roofing": {
-      "value": "400"
-    },
-    "xy_offset_layer_0": {
-      "value": "-0.16"
-    },
-    "support_line_width": {
-      "value": "0.4"
-    },
-    "machine_show_variants": {
-      "default_value": false
-    },
-    "support_tree_branch_diameter": {
-      "default_value": 2
-    },
-    "acceleration_wall_0": {
-      "value": "400"
-    },
-    "retraction_enable": {
-      "default_value": true
-    },
-    "mold_enabled": {
-      "default_value": false
-    },
-    "infill_multiplier": {
-      "default_value": 1
-    },
-    "cool_min_speed": {
-      "default_value": 5
-    },
-    "wireframe_straight_before_down": {
-      "default_value": 20
-    },
-    "jerk_wall_0": {
-      "value": "10"
-    },
-    "machine_shape": {
-      "default_value": "rectangular"
-    },
-    "jerk_layer_0": {
-      "value": "10"
-    },
-    "wall_line_width_0": {
-      "value": "0.4"
-    },
-    "machine_nozzle_id": {
-      "default_value": "unknown"
-    },
-    "raft_interface_acceleration": {
-      "value": "400"
-    },
-    "machine_endstop_positive_direction_z": {
-      "default_value": true
-    },
-    "speed_topbottom": {
-      "value": "30"
-    },
-    "minimum_polygon_circumference": {
-      "default_value": 1.0
-    },
-    "machine_settings": {
-      "default_value": 0
-    },
-    "support_top_distance": {
-      "value": "0.2"
-    },
-    "wipe_retraction_enable": {
-      "value": "True"
-    },
-    "machine_use_extruder_offset_to_offset_coords": {
-      "default_value": true
-    },
-    "roofing_layer_count": {
-      "value": "1"
-    },
-    "support_bottom_distance": {
-      "value": "0.2"
-    },
-    "material_flush_purge_length": {
-      "default_value": 60
-    },
-    "wall_0_wipe_dist": {
-      "value": "0"
-    },
-    "material_bed_temperature_layer_0": {
-      "value": "50"
-    },
-    "fill_outline_gaps": {
-      "default_value": true
-    },
-    "support_interface_density": {
-      "default_value": 100
-    },
-    "material_break_speed": {
-      "default_value": 25
-    },
-    "material_break_preparation_speed": {
-      "default_value": 2
-    },
-    "top_bottom_thickness": {
-      "default_value": 0.8
-    },
-    "travel_compensate_overlapping_walls_x_enabled": {
-      "value": "False"
-    },
-    "outer_inset_first": {
-      "default_value": false
-    },
-    "material_print_temperature_layer_0": {
-      "value": "195"
-    },
-    "retraction_retract_speed": {
-      "value": "30"
-    },
-    "max_extrusion_before_wipe": {
-      "default_value": 10
-    },
-    "material_extrusion_cool_down_speed": {
-      "default_value": 0.7
-    },
-    "material_flush_purge_speed": {
-      "default_value": 0.5
-    },
-    "machine_nozzle_expansion_angle": {
-      "default_value": 45
-    },
-    "ironing_pattern": {
-      "default_value": "zigzag"
-    },
-    "layer_start_x": {
-      "default_value": 0.0
-    },
-    "skirt_line_count": {
-      "default_value": 2
-    },
-    "magic_fuzzy_skin_enabled": {
-      "default_value": false
-    },
-    "cutting_mesh": {
-      "default_value": false
-    },
-    "speed_support_bottom": {
-      "value": "33.333333333333336"
-    },
-    "raft_base_fan_speed": {
-      "value": "0"
-    },
-    "wireframe_printspeed_up": {
-      "value": "5"
-    },
-    "smooth_spiralized_contours": {
-      "default_value": true
-    },
-    "support_line_distance": {
-      "value": "2"
-    },
-    "coasting_enable": {
-      "default_value": true
-    },
-    "speed_equalize_flow_max": {
-      "default_value": 40
-    },
-    "machine_min_cool_heat_time_window": {
-      "default_value": 50.0
-    },
-    "ooze_shield_dist": {
-      "default_value": 4
-    },
-    "wipe_pause": {
-      "default_value": 0
-    },
-    "gradual_infill_step_height": {
-      "default_value": 1.5
-    },
-    "raft_base_jerk": {
-      "value": "10"
-    },
-    "magic_fuzzy_skin_point_dist": {
-      "value": "0.8"
-    },
-    "raft_base_acceleration": {
-      "value": "400"
-    },
-    "anti_overhang_mesh": {
-      "default_value": false
-    },
-    "speed_z_hop": {
-      "default_value": 10
-    },
-    "acceleration_wall_x": {
-      "value": "400"
-    },
-    "machine_height": {
-      "default_value": 210
-    },
-    "raft_jerk": {
-      "value": "10"
-    },
-    "machine_nozzle_offset_y": {
-      "value": "0"
-    },
-    "support_roof_density": {
-      "value": "70"
-    },
-    "wall_line_width": {
-      "value": "0.4"
-    },
-    "zig_zaggify_support": {
-      "value": "False"
-    },
-    "adaptive_layer_height_threshold": {
-      "default_value": 0.2
-    },
-    "material_bed_temp_prepend": {
-      "default_value": true
-    },
-    "support_material_flow": {
-      "value": "98"
-    },
-    "speed_wall": {
-      "value": "20"
-    },
-    "machine_nozzle_offset_x": {
-      "value": "0"
-    },
-    "machine_max_acceleration_x": {
-      "default_value": 9000
-    },
-    "material_adhesion_tendency": {
-      "default_value": 0
-    },
-    "prime_tower_size": {
-      "default_value": 1
-    },
-    "material_break_retracted_position": {
-      "default_value": -50
-    },
-    "ooze_shield_angle": {
-      "default_value": 50
-    },
-    "cross_infill_density_image": {
-      "default_value": ""
-    },
-    "skin_edge_support_layers": {
-      "value": "0"
-    },
-    "support_interface_extruder_nr": {
-      "value": "0"
-    },
-    "support_bottom_enable": {
-      "value": "False"
-    },
-    "machine_depth": {
-      "default_value": 260
-    },
-    "support_tree_branch_distance": {
-      "default_value": 1
-    },
-    "wipe_move_distance": {
-      "default_value": 20
-    },
-    "support_wall_count": {
-      "value": "1"
-    },
-    "jerk_wall": {
-      "value": "10"
-    },
-    "machine_steps_per_mm_e": {
-      "default_value": 1600
-    },
-    "material_initial_print_temperature": {
-      "value": "195"
-    },
-    "support_brim_width": {
-      "default_value": 8.0
-    },
-    "jerk_skirt_brim": {
-      "value": "5"
-    },
-    "speed_print_layer_0": {
-      "value": "10.0"
-    },
-    "brim_replaces_support": {
-      "default_value": true
-    },
-    "cool_min_layer_time_fan_speed_max": {
-      "default_value": 10
-    },
-    "wireframe_roof_outer_delay": {
-      "default_value": 0.2
-    },
-    "support_connect_zigzags": {
-      "default_value": true
-    },
-    "z_seam_relative": {
-      "default_value": false
-    },
-    "support_roof_extruder_nr": {
-      "value": "0"
-    },
-    "material_print_temperature": {
-      "value": "195"
-    },
-    "acceleration_print": {
-      "default_value": 400
-    },
-    "wireframe_flat_delay": {
-      "default_value": 0.1
-    },
-    "support_type": {
-      "default_value": "everywhere"
-    },
-    "support_bottom_line_width": {
-      "value": "0.4"
-    },
-    "meshfix_maximum_deviation": {
-      "default_value": 0.005
-    },
-    "machine_nozzle_size": {
-      "default_value": 0.4
-    },
-    "material_break_temperature": {
-      "default_value": 50
-    },
-    "support_xy_distance": {
-      "default_value": 0.6
-    },
-    "raft_surface_speed": {
-      "value": "60"
-    },
-    "support_tree_collision_resolution": {
-      "value": "0.2"
-    },
-    "speed_equalize_flow_enabled": {
-      "default_value": false
-    },
-    "machine_nozzle_cool_down_speed": {
-      "default_value": 2.0
-    },
-    "minimum_interface_area": {
-      "default_value": 1.0
-    },
     "travel_compensate_overlapping_walls_0_enabled": {
       "value": "False"
     },
-    "draft_shield_height_limitation": {
-      "default_value": "full"
+    "support_bottom_material_flow": {
+      "value": "99"
     },
-    "infill_line_distance": {
-      "value": "5.333333333333333"
-    },
-    "wall_0_extruder_nr": {
-      "value": "-1"
-    },
-    "retraction_hop": {
-      "default_value": 1
-    },
-    "infill_sparse_density": {
-      "default_value": 15
-    },
-    "raft_base_line_spacing": {
-      "value": "0.8"
-    },
-    "jerk_print_layer_0": {
-      "value": "10"
-    },
-    "support_enable": {
-      "default_value": true
-    },
-    "retraction_extra_prime_amount": {
-      "default_value": 0
-    },
-    "jerk_topbottom": {
-      "value": "10"
-    },
-    "shell": {
-      "default_value": 0
-    },
-    "switch_extruder_retraction_speeds": {
-      "default_value": 30
-    },
-    "wireframe_height": {
-      "value": "3"
-    },
-    "acceleration_print_layer_0": {
-      "value": "400"
-    },
-    "raft_surface_jerk": {
-      "value": "10"
-    },
-    "default_material_print_temperature": {
-      "default_value": 200
-    },
-    "gradual_support_infill_steps": {
-      "default_value": 0
-    },
-    "support_mesh_drop_down": {
-      "default_value": true
-    },
-    "minimum_support_area": {
-      "default_value": 0.0
-    },
-    "support_z_distance": {
-      "default_value": 0.2
-    },
-    "wall_min_flow_retract": {
-      "default_value": false
-    },
-    "bridge_skin_density": {
-      "default_value": 100
-    },
-    "machine_filament_park_distance": {
-      "value": "16"
-    },
-    "machine_name": {
-      "default_value": "Unknown"
-    },
-    "wireframe_strategy": {
-      "default_value": "compensate"
-    },
-    "top_skin_preshrink": {
-      "value": "0.8"
-    },
-    "coasting_min_volume": {
-      "default_value": 0.8
-    },
-    "prime_tower_enable": {
-      "default_value": false
-    },
-    "raft_interface_fan_speed": {
-      "value": "40"
-    },
-    "machine_buildplate_type": {
-      "default_value": "glass"
-    },
-    "prime_tower_position_x": {
-      "value": "1"
-    },
-    "bridge_skin_speed_3": {
-      "value": "15.0"
-    },
-    "bridge_skin_density_3": {
-      "default_value": 80
-    },
-    "flow_rate_extrusion_offset_factor": {
-      "default_value": 100
-    },
-    "acceleration_ironing": {
-      "value": "250"
-    },
-    "support_bottom_stair_step_width": {
-      "default_value": 5.0
-    },
-    "bridge_skin_support_threshold": {
-      "default_value": 50
-    },
-    "spaghetti_max_infill_angle": {
-      "default_value": 10
-    },
-    "ironing_enabled": {
-      "default_value": false
-    },
-    "prime_tower_brim_enable": {
-      "default_value": false
-    },
-    "support_fan_enable": {
-      "default_value": false
-    },
-    "support_conical_enabled": {
-      "default_value": false
-    },
-    "fill_perimeter_gaps": {
-      "default_value": "everywhere"
-    },
-    "wall_extruder_nr": {
-      "default_value": "-1"
-    },
-    "acceleration_support": {
-      "value": "400"
+    "jerk_support_roof": {
+      "value": "5"
     },
     "wall_x_material_flow": {
       "value": "99"
     },
-    "adhesion_type": {
-      "default_value": "raft"
+    "speed_support_interface": {
+      "value": "33.33"
+    },
+    "jerk_layer_0": {
+      "value": "10"
+    },
+    "support_angle": {
+      "default_value": 60
     },
     "infill_sparse_thickness": {
       "value": "0.2"
     },
-    "wipe_hop_speed": {
-      "value": "10"
+    "prime_tower_position_y": {
+      "value": "1"
     },
-    "extruder_prime_pos_z": {
-      "default_value": 0
+    "retraction_combing": {
+      "default_value": "infill"
     },
-    "wipe_retraction_amount": {
-      "value": "3"
-    },
-    "support_tree_branch_diameter_angle": {
-      "default_value": 5
-    },
-    "support_roof_offset": {
-      "value": "0.0"
-    },
-    "machine_extruders_share_heater": {
-      "default_value": false
-    },
-    "small_feature_speed_factor_0": {
-      "value": "50"
-    },
-    "material_surface_energy": {
-      "default_value": 100
-    },
-    "jerk_roofing": {
-      "value": "10"
-    },
-    "speed_travel_layer_0": {
-      "value": "120"
-    },
-    "infill_enable_travel_optimization": {
-      "default_value": false
-    },
-    "raft_base_speed": {
-      "value": "60"
-    },
-    "skin_edge_support_thickness": {
-      "value": "0"
-    },
-    "acceleration_travel": {
-      "value": "400"
-    },
-    "meshfix": {
-      "default_value": 0
-    },
-    "infill_offset_x": {
-      "default_value": 0
-    },
-    "top_bottom_extruder_nr": {
-      "default_value": "-1"
-    },
-    "retraction_hop_after_extruder_switch": {
-      "default_value": true
-    },
-    "wipe_retraction_prime_speed": {
-      "value": "30"
-    },
-    "adaptive_layer_height_enabled": {
-      "default_value": false
-    },
-    "infill_mesh": {
-      "default_value": false
-    },
-    "roofing_extruder_nr": {
-      "value": "-1"
-    },
-    "cool_fan_speed_0": {
-      "default_value": 100
-    },
-    "machine_steps_per_mm_z": {
-      "default_value": 50
-    },
-    "acceleration_support_interface": {
+    "acceleration_prime_tower": {
       "value": "250"
     },
-    "zig_zaggify_infill": {
-      "value": "False"
-    },
-    "speed_prime_tower": {
-      "value": "20"
-    },
-    "infill_overlap_mm": {
-      "value": "0.0"
-    },
-    "gradual_infill_steps": {
-      "default_value": 0
-    },
-    "support_mesh": {
-      "default_value": false
-    },
-    "support_interface_skip_height": {
-      "default_value": 0.3
-    },
-    "mesh_position_x": {
-      "default_value": 0
-    },
-    "roofing_angles": {
-      "value": "[ ]"
-    },
-    "wireframe_up_half_speed": {
-      "default_value": 0.3
-    },
-    "wall_0_material_flow": {
-      "value": "99"
-    },
-    "adaptive_layer_height_variation_step": {
-      "default_value": 0.01
-    },
-    "skin_preshrink": {
-      "value": "0.8"
-    },
-    "raft_base_thickness": {
-      "value": "0.2"
-    },
-    "support_extruder_nr": {
-      "value": "0"
-    },
-    "mesh_position_z": {
-      "default_value": 0
-    },
-    "draft_shield_height": {
-      "value": "10"
-    },
-    "support_roof_angles": {
-      "value": "[ ]"
-    },
-    "wireframe_drag_along": {
-      "default_value": 0.6
-    },
-    "material_end_of_filament_purge_speed": {
-      "default_value": 0.5
-    },
-    "wireframe_fall_down": {
-      "default_value": 0.5
-    },
-    "support_bottom_line_distance": {
-      "value": "0.4"
-    },
-    "dual": {
-      "default_value": 0
-    },
-    "conical_overhang_angle": {
-      "default_value": 50
-    },
-    "speed_support": {
-      "value": "50"
-    },
-    "speed_print": {
-      "default_value": 20
-    },
-    "switch_extruder_retraction_amount": {
-      "value": "16"
-    },
-    "support_tower_roof_angle": {
-      "default_value": 65
-    },
-    "brim_width": {
-      "default_value": 10
-    },
-    "travel": {
-      "default_value": 0
-    },
-    "mesh_rotation_matrix": {
-      "default_value": "[[1,0,0], [0,1,0], [0,0,1]]"
-    },
-    "travel_retract_before_outer_wall": {
-      "default_value": true
-    },
-    "prime_tower_flow": {
-      "value": "99"
-    },
-    "ooze_shield_enabled": {
-      "default_value": false
-    },
-    "bottom_skin_preshrink": {
-      "value": "0.8"
-    },
-    "raft_surface_acceleration": {
-      "value": "400"
-    },
-    "material_flow_layer_0": {
-      "default_value": 100
-    },
-    "material_end_of_filament_purge_length": {
-      "default_value": 20
-    },
-    "support_tree_angle": {
-      "default_value": 40
-    },
-    "wireframe_flow": {
-      "default_value": 100
-    },
-    "machine_max_acceleration_z": {
-      "default_value": 100
-    },
-    "relative_extrusion": {
-      "value": "False"
-    },
-    "speed_ironing": {
-      "value": "20.0"
-    },
-    "machine_nozzle_heat_up_speed": {
-      "default_value": 2.0
-    },
-    "support_xy_distance_overhang": {
-      "value": "0.5"
-    },
-    "support_interface_angles": {
-      "default_value": "[ ]"
-    },
-    "material_diameter": {
-      "default_value": 1.75
-    },
-    "retract_at_layer_change": {
-      "default_value": true
+    "acceleration_print": {
+      "default_value": 400
     },
     "acceleration_infill": {
       "value": "500"
     },
-    "layer_0_z_overlap": {
-      "value": "0.1"
+    "bridge_wall_speed": {
+      "value": "10.0"
     },
-    "support_extruder_nr_layer_0": {
-      "value": "0"
+    "acceleration_wall_0": {
+      "value": "400"
     },
-    "support_bottom_offset": {
-      "value": "0.0"
+    "support_offset": {
+      "default_value": 0.2
     },
-    "bridge_skin_speed_2": {
-      "value": "15"
-    },
-    "bridge_wall_min_length": {
-      "default_value": 5
-    },
-    "acceleration_support_bottom": {
-      "value": "250"
-    },
-    "support_tower_diameter": {
-      "default_value": 3.0
-    },
-    "coasting_volume": {
-      "default_value": 0.064
-    },
-    "material_maximum_park_duration": {
-      "default_value": 300
-    },
-    "support_interface_height": {
-      "default_value": 1
-    },
-    "machine_endstop_positive_direction_y": {
-      "default_value": false
-    },
-    "wireframe_printspeed_bottom": {
-      "value": "5"
-    },
-    "wireframe_bottom_delay": {
-      "default_value": 0
-    },
-    "machine_steps_per_mm_y": {
-      "default_value": 50
-    },
-    "raft_surface_line_spacing": {
-      "value": "0.4"
-    },
-    "center_object": {
-      "default_value": false
-    },
-    "infill_randomize_start_location": {
-      "default_value": false
+    "build_volume_temperature": {
+      "default_value": 28
     },
     "switch_extruder_prime_speed": {
       "value": "60"
     },
-    "material_bed_temperature": {
-      "value": "50"
+    "speed_prime_tower": {
+      "value": "20"
     },
-    "max_skin_angle_for_expansion": {
-      "default_value": 50
+    "top_skin_preshrink": {
+      "value": "0.8"
     },
-    "cool_fan_speed": {
-      "value": "100.0"
-    },
-    "meshfix_extensive_stitching": {
-      "default_value": false
-    },
-    "skin_material_flow": {
-      "value": "99"
-    },
-    "extruder_prime_pos_y": {
-      "default_value": 0
-    },
-    "infill": {
-      "default_value": 0
+    "jerk_ironing": {
+      "value": "5"
     },
     "skin_outline_count": {
       "default_value": 0
     },
-    "material_break_preparation_temperature": {
-      "value": "195"
+    "skirt_brim_speed": {
+      "value": "10.0"
     },
-    "support_skip_zag_per_mm": {
+    "raft_base_thickness": {
+      "value": "0.2"
+    },
+    "infill_sparse_density": {
+      "default_value": 15
+    },
+    "support_bottom_extruder_nr": {
+      "value": "0"
+    },
+    "support_material_flow": {
+      "value": "98"
+    },
+    "min_infill_area": {
+      "default_value": 1
+    },
+    "jerk_support": {
+      "value": "10"
+    },
+    "bottom_skin_expand_distance": {
+      "value": "0.8"
+    },
+    "retract_at_layer_change": {
+      "default_value": true
+    },
+    "jerk_support_interface": {
+      "value": "5"
+    },
+    "jerk_support_bottom": {
+      "value": "5"
+    },
+    "optimize_wall_printing_order": {
+      "default_value": true
+    },
+    "skirt_brim_minimal_length": {
+      "default_value": 50
+    },
+    "jerk_support_infill": {
+      "value": "10"
+    },
+    "initial_bottom_layers": {
+      "value": "3"
+    },
+    "prime_tower_position_x": {
+      "value": "1"
+    },
+    "acceleration_support_bottom": {
+      "value": "250"
+    },
+    "speed_support_roof": {
+      "value": "33.33"
+    },
+    "speed_support_infill": {
+      "value": "80"
+    },
+    "bridge_skin_speed_2": {
+      "value": "15"
+    },
+    "raft_fan_speed": {
+      "default_value": 100
+    },
+    "wipe_retraction_amount": {
+      "value": "3"
+    },
+    "skin_edge_support_thickness": {
+      "value": "0"
+    },
+    "bottom_layers": {
+      "value": "3"
+    },
+    "retraction_extrusion_window": {
+      "value": "3"
+    },
+    "acceleration_ironing": {
+      "value": "250"
+    },
+    "support_top_distance": {
+      "value": "0.2"
+    },
+    "travel_retract_before_outer_wall": {
+      "default_value": true
+    },
+    "material_flow": {
+      "default_value": 99
+    },
+    "support_bottom_distance": {
+      "value": "0.2"
+    },
+    "expand_skins_expand_distance": {
+      "value": "0.8"
+    },
+    "jerk_wall": {
+      "value": "10"
+    },
+    "support_zag_skip_count": {
+      "value": "8"
+    },
+    "connect_infill_polygons": {
+      "value": "False"
+    },
+    "acceleration_skirt_brim": {
+      "value": "250"
+    },
+    "z_seam_corner": {
+      "default_value": "z_seam_corner_weighted"
+    },
+    "raft_surface_jerk": {
+      "value": "10"
+    },
+    "cross_infill_pocket_size": {
+      "value": "5.33"
+    },
+    "support_infill_extruder_nr": {
+      "value": "0"
+    },
+    "acceleration_enabled": {
+      "default_value": true
+    },
+    "jerk_wall_x": {
+      "value": "10"
+    },
+    "skin_overlap": {
+      "value": "15"
+    },
+    "infill_material_flow": {
+      "value": "99"
+    },
+    "speed_equalize_flow_max": {
+      "default_value": 40
+    },
+    "skin_preshrink": {
+      "value": "0.8"
+    },
+    "speed_wall": {
+      "value": "20"
+    },
+    "support_tree_collision_resolution": {
+      "value": "0.2"
+    },
+    "meshfix_maximum_deviation": {
+      "default_value": 0.005
+    },
+    "jerk_roofing": {
+      "value": "10"
+    },
+    "fill_outline_gaps": {
+      "default_value": true
+    },
+    "layer_height": {
+      "default_value": 0.2
+    },
+    "remove_empty_first_layers": {
+      "default_value": false
+    },
+    "prime_tower_flow": {
+      "value": "99"
+    },
+    "support_roof_line_distance": {
+      "value": "0.57"
+    },
+    "wipe_retraction_speed": {
+      "value": "30"
+    },
+    "support_extruder_nr_layer_0": {
+      "value": "0"
+    },
+    "layer_height_0": {
+      "default_value": 0.2
+    },
+    "multiple_mesh_overlap": {
+      "default_value": 0
+    },
+    "ooze_shield_dist": {
+      "default_value": 4
+    },
+    "jerk_enabled": {
+      "default_value": true
+    },
+    "acceleration_support": {
+      "value": "400"
+    },
+    "adhesion_extruder_nr": {
+      "value": "0"
+    },
+    "skirt_line_count": {
+      "default_value": 2
+    },
+    "travel_compensate_overlapping_walls_x_enabled": {
+      "value": "False"
+    },
+    "jerk_wall_0": {
+      "value": "10"
+    },
+    "raft_speed": {
+      "value": "60"
+    },
+    "speed_layer_0": {
+      "value": "10.0"
+    },
+    "machine_width": {
+      "default_value": 210
+    },
+    "acceleration_wall": {
+      "value": "400"
+    },
+    "jerk_infill": {
+      "value": "10"
+    },
+    "wipe_hop_enable": {
+      "value": "False"
+    },
+    "acceleration_travel_layer_0": {
+      "value": "400"
+    },
+    "raft_interface_speed": {
+      "value": "60"
+    },
+    "skin_edge_support_layers": {
+      "value": "0"
+    },
+    "support_xy_distance_overhang": {
+      "value": "0.5"
+    },
+    "brim_width": {
       "default_value": 10
     },
-    "wireframe_flow_connection": {
-      "value": "100"
+    "coasting_enable": {
+      "default_value": true
     },
-    "bridge_wall_material_flow": {
+    "jerk_print": {
+      "default_value": 10
+    },
+    "acceleration_support_roof": {
+      "value": "250"
+    },
+    "prime_tower_min_volume": {
+      "default_value": 4
+    },
+    "support_roof_material_flow": {
+      "value": "99"
+    },
+    "wall_0_wipe_dist": {
+      "value": "0"
+    },
+    "jerk_topbottom": {
+      "value": "10"
+    },
+    "retraction_count_max": {
+      "default_value": 30
+    },
+    "skin_overlap_mm": {
+      "value": "0.06"
+    },
+    "extruders_enabled_count": {
+      "value": "2"
+    },
+    "speed_support_bottom": {
+      "value": "33.33"
+    },
+    "support_skip_some_zags": {
+      "default_value": true
+    },
+    "ooze_shield_angle": {
       "default_value": 50
+    },
+    "wall_thickness": {
+      "value": "1.2"
+    },
+    "speed_print_layer_0": {
+      "value": "10.0"
     }
   }
 }