From 945cc7c3e63d70fa3f66be601dda6be14302b608 Mon Sep 17 00:00:00 2001
From: Tim Kuipers <t.kuipers@ultimaker.com>
Date: Thu, 13 Sep 2018 14:25:57 +0200
Subject: [PATCH] JSon feat: support brim settings

---
 resources/definitions/fdmprinter.def.json | 42 +++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json
index e5726afdca..74e9bab14d 100644
--- a/resources/definitions/fdmprinter.def.json
+++ b/resources/definitions/fdmprinter.def.json
@@ -3888,6 +3888,48 @@
                     "settable_per_mesh": false,
                     "settable_per_extruder": true
                 },
+                "support_brim_enable":
+                {
+                    "label": "Enable Support Brim",
+                    "description": "Generate a brim within the support infill regions of the first layer. This brim is printed underneath the support, not around it. Enabling this setting increases the adhesion of support to the build plate.",
+                    "type": "bool",
+                    "default_value": false,
+                    "enabled": "support_enable or support_tree_enable",
+                    "limit_to_extruder": "support_infill_extruder_nr",
+                    "settable_per_mesh": false,
+                    "settable_per_extruder": true
+                },
+                "support_brim_width":
+                {
+                    "label": "Support Brim Width",
+                    "description": "The width of the brim to print underneath the support. A larger brim enhances adhesion to the build plate, at the cost of some extra material.",
+                    "type": "float",
+                    "unit": "mm",
+                    "default_value": 8.0,
+                    "minimum_value": "0.0",
+                    "maximum_value_warning": "50.0",
+                    "enabled": "support_enable",
+                    "settable_per_mesh": false,
+                    "settable_per_extruder": true,
+                    "limit_to_extruder": "support_infill_extruder_nr",
+                    "children":
+                    {
+                        "support_brim_line_count":
+                        {
+                            "label": "Support Brim Line Count",
+                            "description": "The number of lines used for the support brim. More brim lines enhance adhesion to the build plate, at the cost of some extra material.",
+                            "type": "int",
+                            "default_value": 20,
+                            "minimum_value": "0",
+                            "maximum_value_warning": "50 / skirt_brim_line_width",
+                            "value": "math.ceil(support_brim_width / (skirt_brim_line_width * initial_layer_line_width_factor / 100.0))",
+                            "enabled": "support_enable",
+                            "settable_per_mesh": false,
+                            "settable_per_extruder": true,
+                            "limit_to_extruder": "support_infill_extruder_nr"
+                        }
+                    }
+                },
                 "support_z_distance":
                 {
                     "label": "Support Z Distance",