HMS434 update

Z seam changed
PLA quality profiles deleted

resources/definitions/hms434.def.json

@@ -96,8 +96,8 @@
         "filter_out_tiny_gaps":      {"value": true },
         "fill_outline_gaps":         {"value": true },
         "z_seam_type":               {"value": "'back'"},
-        "z_seam_x":                  {"value": "0"},
+        "z_seam_x":                  {"value": "300"},
-        "z_seam_y":                  {"value": "0"},
+        "z_seam_y":                  {"value": "325"},
         "z_seam_corner":             {"value": "'z_seam_corner_inner'"},
         "skin_outline_count":        {"value": "0"},
         "ironing_enabled":           {"value": true },

resources/quality/hms434/pla/hms434_0.4_pla_high.inst.cfg

@@ -1,36 +0,0 @@
-[general]
-version = 4
-name = High
-definition = hms434
-
-[metadata]
-setting_version = 10
-type = quality
-quality_type = high
-weight = 1
-material = generic_pla
-variant = 0.4mm TP extruder
-
-[values]
-
-wall_0_wipe_dist = 0.0
-
-infill_overlap_mm = -0.1
-infill_wipe_dist = 0
-
-default_material_print_temperature = 190
-material_standby_temperature = 160
-default_material_bed_temperature = 45
-build_volume_temperature = 43
-material_flow = 100
-retraction_amount = 1
-retraction_speed = 40
-retraction_prime_speed = 8
-retraction_extra_prime_amount = 0
-switch_extruder_retraction_amount = 2
-
-speed_print = 50
-
-coasting_volume = 0.05
-coasting_min_volume = 0.17
-coasting_speed = 100

resources/quality/hms434/pla/hms434_0.4_pla_normal.inst.cfg

@@ -1,36 +0,0 @@
-[general]
-version = 4
-name = Normal
-definition = hms434
-
-[metadata]
-setting_version = 10
-type = quality
-quality_type = normal
-weight = 0
-material = generic_pla
-variant = 0.4mm TP extruder
-
-[values]
-
-wall_0_wipe_dist = 0.0
-
-infill_overlap_mm = -0.1
-infill_wipe_dist = 0
-
-default_material_print_temperature = 190
-material_standby_temperature = 160
-default_material_bed_temperature = 45
-build_volume_temperature = 43
-material_flow = 100
-retraction_amount = 1
-retraction_speed = 40
-retraction_prime_speed = 8
-retraction_extra_prime_amount = 0
-switch_extruder_retraction_amount = 2
-
-speed_print = 50
-
-coasting_volume = 0.05
-coasting_min_volume = 0.17
-coasting_speed = 100

resources/quality/hms434/pla/hms434_0.8_pla_coarse.inst.cfg

@@ -1,36 +0,0 @@
-[general]
-version = 4
-name = Coarse
-definition = hms434
-
-[metadata]
-setting_version = 10
-type = quality
-quality_type = coarse
-weight = -1
-material = generic_pla
-variant = 0.8mm TP extruder
-
-[values]
-
-wall_0_wipe_dist = 0.0
-
-infill_overlap_mm = -0.1
-infill_wipe_dist = 0
-
-default_material_print_temperature = 190
-material_standby_temperature = 160
-default_material_bed_temperature = 45
-build_volume_temperature = 43
-material_flow = 100
-retraction_amount = 1
-retraction_speed = 40
-retraction_prime_speed = 8
-retraction_extra_prime_amount = 0
-switch_extruder_retraction_amount = 2
-
-speed_print = 50
-
-coasting_volume = 0.05
-coasting_min_volume = 0.17
-coasting_speed = 100

resources/quality/hms434/pla/hms434_0.8_pla_normal.inst.cfg

@@ -1,40 +0,0 @@
-[general]
-version = 4
-name = Normal
-definition = hms434
-
-[metadata]
-setting_version = 10
-type = quality
-quality_type = normal
-weight = 0
-material = generic_pla
-variant = 0.8mm TP extruder
-
-[values]
-
-wall_0_wipe_dist = 0.0
-
-infill_overlap_mm = -0.1
-infill_sparse_thickness = =0.4 if infill_sparse_density < 90 else 0.2
-infill_wipe_dist = 0
-
-default_material_print_temperature = 190
-material_standby_temperature = 160
-default_material_bed_temperature = 45
-build_volume_temperature = 43
-material_flow = 100
-retraction_amount = 1
-retraction_speed = 40
-retraction_prime_speed = 8
-retraction_extra_prime_amount = 0
-switch_extruder_retraction_amount = 2
-
-speed_print = 50
-speed_infill = 42
-
-support_infill_sparse_thickness = 0.4
-
-coasting_volume = 0.05
-coasting_min_volume = 0.17
-coasting_speed = 100