Merge remote-tracking branch 'upstream/master' into mb-anchor-skin-in-infill

cura/BuildVolume.py

@@ -2,6 +2,7 @@
 # Cura is released under the terms of the AGPLv3 or higher.
 
 from cura.Settings.ExtruderManager import ExtruderManager
+from UM.Settings.ContainerRegistry import ContainerRegistry
 from UM.i18n import i18nCatalog
 from UM.Scene.Platform import Platform
 from UM.Scene.Iterator.BreadthFirstIterator import BreadthFirstIterator
@@ -25,9 +26,6 @@ import numpy
 import copy
 import math
 
-import UM.Settings.ContainerRegistry
-
-
 # Setting for clearance around the prime
 PRIME_CLEARANCE = 6.5
 
@@ -70,6 +68,7 @@ class BuildVolume(SceneNode):
         self._volume_aabb = None
 
         self._raft_thickness = 0.0
+        self._extra_z_clearance = 0.0
         self._adhesion_type = None
         self._platform = Platform(self)
 
@@ -349,7 +348,7 @@ class BuildVolume(SceneNode):
 
         self._volume_aabb = AxisAlignedBox(
             minimum = Vector(min_w, min_h - 1.0, min_d),
-            maximum = Vector(max_w, max_h - self._raft_thickness, max_d))
+            maximum = Vector(max_w, max_h - self._raft_thickness - self._extra_z_clearance, max_d))
 
         bed_adhesion_size = self._getEdgeDisallowedSize()
 
@@ -358,7 +357,7 @@ class BuildVolume(SceneNode):
         # The +1 and -1 is added as there is always a bit of extra room required to work properly.
         scale_to_max_bounds = AxisAlignedBox(
             minimum = Vector(min_w + bed_adhesion_size + 1, min_h, min_d + disallowed_area_size - bed_adhesion_size + 1),
-            maximum = Vector(max_w - bed_adhesion_size - 1, max_h - self._raft_thickness, max_d - disallowed_area_size + bed_adhesion_size - 1)
+            maximum = Vector(max_w - bed_adhesion_size - 1, max_h - self._raft_thickness - self._extra_z_clearance, max_d - disallowed_area_size + bed_adhesion_size - 1)
         )
 
         Application.getInstance().getController().getScene()._maximum_bounds = scale_to_max_bounds
@@ -386,6 +385,23 @@ class BuildVolume(SceneNode):
             self.setPosition(Vector(0, -self._raft_thickness, 0), SceneNode.TransformSpace.World)
             self.raftThicknessChanged.emit()
 
+    def _updateExtraZClearance(self):
+        extra_z = 0.0
+        extruders = ExtruderManager.getInstance().getMachineExtruders(self._global_container_stack.getId())
+        use_extruders = False
+        for extruder in extruders:
+            if extruder.getProperty("retraction_hop_enabled", "value"):
+                retraction_hop = extruder.getProperty("retraction_hop", "value")
+                if extra_z is None or retraction_hop > extra_z:
+                    extra_z = retraction_hop
+            use_extruders = True
+        if not use_extruders:
+            # If no extruders, take global value.
+            if self._global_container_stack.getProperty("retraction_hop_enabled", "value"):
+                extra_z = self._global_container_stack.getProperty("retraction_hop", "value")
+        if extra_z != self._extra_z_clearance:
+            self._extra_z_clearance = extra_z
+
     ##  Update the build volume visualization
     def _onStackChanged(self):
         if self._global_container_stack:
@@ -452,6 +468,10 @@ class BuildVolume(SceneNode):
             self._updateRaftThickness()
             rebuild_me = True
 
+        if setting_key in self._extra_z_settings:
+            self._updateExtraZClearance()
+            rebuild_me = True
+
         if rebuild_me:
             self.rebuild()
 
@@ -796,7 +816,7 @@ class BuildVolume(SceneNode):
                 stack = self._global_container_stack
             else:
                 extruder_stack_id = ExtruderManager.getInstance().extruderIds[str(extruder_index)]
-                stack = UM.Settings.ContainerRegistry.getInstance().findContainerStacks(id = extruder_stack_id)[0]
+                stack = ContainerRegistry.getInstance().findContainerStacks(id = extruder_stack_id)[0]
 
         value = stack.getProperty(setting_key, property)
         setting_type = stack.getProperty(setting_key, "type")
@@ -874,6 +894,7 @@ class BuildVolume(SceneNode):
 
     _skirt_settings = ["adhesion_type", "skirt_gap", "skirt_line_count", "skirt_brim_line_width", "brim_width", "brim_line_count", "raft_margin", "draft_shield_enabled", "draft_shield_dist"]
     _raft_settings = ["adhesion_type", "raft_base_thickness", "raft_interface_thickness", "raft_surface_layers", "raft_surface_thickness", "raft_airgap"]
+    _extra_z_settings = ["retraction_hop_enabled", "retraction_hop"]
     _prime_settings = ["extruder_prime_pos_x", "extruder_prime_pos_y", "extruder_prime_pos_z"]
     _tower_settings = ["prime_tower_enable", "prime_tower_size", "prime_tower_position_x", "prime_tower_position_y"]
     _ooze_shield_settings = ["ooze_shield_enabled", "ooze_shield_dist"]

cura/CameraAnimation.py

@@ -7,6 +7,7 @@ from PyQt5.QtGui import QVector3D
 
 from UM.Math.Vector import Vector
 
+
 class CameraAnimation(QVariantAnimation):
     def __init__(self, parent = None):
         super().__init__(parent)

cura/ConvexHullDecorator.py

@@ -1,13 +1,13 @@
 # Copyright (c) 2016 Ultimaker B.V.
 # Cura is released under the terms of the AGPLv3 or higher.
 
-from UM.Scene.SceneNodeDecorator import SceneNodeDecorator
 from UM.Application import Application
-from cura.Settings.ExtruderManager import ExtruderManager
 from UM.Math.Polygon import Polygon
-from . import ConvexHullNode
+from UM.Scene.SceneNodeDecorator import SceneNodeDecorator
+from UM.Settings.ContainerRegistry import ContainerRegistry
 
-import UM.Settings.ContainerRegistry
+from cura.Settings.ExtruderManager import ExtruderManager
+from . import ConvexHullNode
 
 import numpy
 
@@ -197,7 +197,7 @@ class ConvexHullDecorator(SceneNodeDecorator):
 
                     hull = Polygon(vertex_data)
 
-                    if len(vertex_data) >= 4:
+                    if len(vertex_data) >= 3:
                         convex_hull = hull.getConvexHull()
                         offset_hull = self._offsetHull(convex_hull)
             else:
@@ -308,11 +308,11 @@ class ConvexHullDecorator(SceneNodeDecorator):
             extruder_stack_id = self._node.callDecoration("getActiveExtruder")
             if not extruder_stack_id: #Decoration doesn't exist.
                 extruder_stack_id = ExtruderManager.getInstance().extruderIds["0"]
-            extruder_stack = UM.Settings.ContainerRegistry.getInstance().findContainerStacks(id = extruder_stack_id)[0]
+            extruder_stack = ContainerRegistry.getInstance().findContainerStacks(id = extruder_stack_id)[0]
             return extruder_stack.getProperty(setting_key, property)
         else: #Limit_to_extruder is set. Use that one.
             extruder_stack_id = ExtruderManager.getInstance().extruderIds[str(extruder_index)]
-            stack = UM.Settings.ContainerRegistry.getInstance().findContainerStacks(id = extruder_stack_id)[0]
+            stack = ContainerRegistry.getInstance().findContainerStacks(id = extruder_stack_id)[0]
             return stack.getProperty(setting_key, property)
 
     ## Returns true if node is a descendant or the same as the root node.

cura/CrashHandler.py

@@ -12,10 +12,14 @@ from UM.Logger import Logger
 from UM.i18n import i18nCatalog
 catalog = i18nCatalog("cura")
 
-try:
+MYPY = False
-    from cura.CuraVersion import CuraDebugMode
+if MYPY:
-except ImportError:
+    CuraDebugMode = False
-    CuraDebugMode = False  # [CodeStyle: Reflecting imported value]
+else:
+    try:
+        from cura.CuraVersion import CuraDebugMode
+    except ImportError:
+        CuraDebugMode = False  # [CodeStyle: Reflecting imported value]
 
 # List of exceptions that should be considered "fatal" and abort the program.
 # These are primarily some exception types that we simply cannot really recover from

cura/CuraApplication.py

@@ -1,5 +1,7 @@
 # Copyright (c) 2015 Ultimaker B.V.
 # Cura is released under the terms of the AGPLv3 or higher.
+from PyQt5.QtNetwork import QLocalServer
+from PyQt5.QtNetwork import QLocalSocket
 
 from UM.Qt.QtApplication import QtApplication
 from UM.Scene.SceneNode import SceneNode
@@ -18,6 +20,8 @@ from UM.JobQueue import JobQueue
 from UM.SaveFile import SaveFile
 from UM.Scene.Selection import Selection
 from UM.Scene.GroupDecorator import GroupDecorator
+from UM.Settings.ContainerStack import ContainerStack
+from UM.Settings.InstanceContainer import InstanceContainer
 from UM.Settings.Validator import Validator
 from UM.Message import Message
 from UM.i18n import i18nCatalog
@@ -26,7 +30,6 @@ from UM.Operations.AddSceneNodeOperation import AddSceneNodeOperation
 from UM.Operations.RemoveSceneNodeOperation import RemoveSceneNodeOperation
 from UM.Operations.GroupedOperation import GroupedOperation
 from UM.Operations.SetTransformOperation import SetTransformOperation
-from UM.Operations.TranslateOperation import TranslateOperation
 from cura.SetParentOperation import SetParentOperation
 from cura.SliceableObjectDecorator import SliceableObjectDecorator
 from cura.BlockSlicingDecorator import BlockSlicingDecorator
@@ -34,6 +37,11 @@ from cura.BlockSlicingDecorator import BlockSlicingDecorator
 from UM.Settings.SettingDefinition import SettingDefinition, DefinitionPropertyType
 from UM.Settings.ContainerRegistry import ContainerRegistry
 from UM.Settings.SettingFunction import SettingFunction
+from cura.Settings.MachineNameValidator import MachineNameValidator
+from cura.Settings.ProfilesModel import ProfilesModel
+from cura.Settings.QualityAndUserProfilesModel import QualityAndUserProfilesModel
+from cura.Settings.SettingInheritanceManager import SettingInheritanceManager
+from cura.Settings.UserProfilesModel import UserProfilesModel
 
 from . import PlatformPhysics
 from . import BuildVolume
@@ -45,7 +53,14 @@ from . import CuraSplashScreen
 from . import CameraImageProvider
 from . import MachineActionManager
 
-import cura.Settings
+from cura.Settings.MachineManager import MachineManager
+from cura.Settings.ExtruderManager import ExtruderManager
+from cura.Settings.UserChangesModel import UserChangesModel
+from cura.Settings.ExtrudersModel import ExtrudersModel
+from cura.Settings.ContainerSettingsModel import ContainerSettingsModel
+from cura.Settings.MaterialSettingsVisibilityHandler import MaterialSettingsVisibilityHandler
+from cura.Settings.QualitySettingsModel import QualitySettingsModel
+from cura.Settings.ContainerManager import ContainerManager
 
 from PyQt5.QtCore import QUrl, pyqtSignal, pyqtProperty, QEvent, Q_ENUMS
 from UM.FlameProfiler import pyqtSlot
@@ -59,15 +74,18 @@ import numpy
 import copy
 import urllib.parse
 import os
-
+import argparse
+import json
 
 numpy.seterr(all="ignore")
 
-try:
+MYPY = False
-    from cura.CuraVersion import CuraVersion, CuraBuildType
+if not MYPY:
-except ImportError:
+    try:
-    CuraVersion = "master"  # [CodeStyle: Reflecting imported value]
+        from cura.CuraVersion import CuraVersion, CuraBuildType
-    CuraBuildType = ""
+    except ImportError:
+        CuraVersion = "master"  # [CodeStyle: Reflecting imported value]
+        CuraBuildType = ""
 
 class CuraApplication(QtApplication):
     class ResourceTypes:
@@ -83,6 +101,7 @@ class CuraApplication(QtApplication):
     Q_ENUMS(ResourceTypes)
 
     def __init__(self):
+
         Resources.addSearchPath(os.path.join(QtApplication.getInstallPrefix(), "share", "cura", "resources"))
         if not hasattr(sys, "frozen"):
             Resources.addSearchPath(os.path.join(os.path.abspath(os.path.dirname(__file__)), "..", "resources"))
@@ -107,9 +126,9 @@ class CuraApplication(QtApplication):
 
         SettingDefinition.addSettingType("extruder", None, str, Validator)
 
-        SettingFunction.registerOperator("extruderValues", cura.Settings.ExtruderManager.getExtruderValues)
+        SettingFunction.registerOperator("extruderValues", ExtruderManager.getExtruderValues)
-        SettingFunction.registerOperator("extruderValue", cura.Settings.ExtruderManager.getExtruderValue)
+        SettingFunction.registerOperator("extruderValue", ExtruderManager.getExtruderValue)
-        SettingFunction.registerOperator("resolveOrValue", cura.Settings.ExtruderManager.getResolveOrValue)
+        SettingFunction.registerOperator("resolveOrValue", ExtruderManager.getResolveOrValue)
 
         ## Add the 4 types of profiles to storage.
         Resources.addStorageType(self.ResourceTypes.QualityInstanceContainer, "quality")
@@ -128,13 +147,14 @@ class CuraApplication(QtApplication):
 
         ##  Initialise the version upgrade manager with Cura's storage paths.
         import UM.VersionUpgradeManager #Needs to be here to prevent circular dependencies.
+
         UM.VersionUpgradeManager.VersionUpgradeManager.getInstance().setCurrentVersions(
             {
-                ("quality", UM.Settings.InstanceContainer.Version):    (self.ResourceTypes.QualityInstanceContainer, "application/x-uranium-instancecontainer"),
+                ("quality", InstanceContainer.Version):    (self.ResourceTypes.QualityInstanceContainer, "application/x-uranium-instancecontainer"),
-                ("machine_stack", UM.Settings.ContainerStack.Version): (self.ResourceTypes.MachineStack, "application/x-uranium-containerstack"),
+                ("machine_stack", ContainerStack.Version): (self.ResourceTypes.MachineStack, "application/x-uranium-containerstack"),
-                ("extruder_train", UM.Settings.ContainerStack.Version): (self.ResourceTypes.ExtruderStack, "application/x-uranium-extruderstack"),
+                ("extruder_train", ContainerStack.Version): (self.ResourceTypes.ExtruderStack, "application/x-uranium-extruderstack"),
-                ("preferences", UM.Preferences.Version):               (Resources.Preferences, "application/x-uranium-preferences"),
+                ("preferences", Preferences.Version):               (Resources.Preferences, "application/x-uranium-preferences"),
-                ("user", UM.Settings.InstanceContainer.Version):       (self.ResourceTypes.UserInstanceContainer, "application/x-uranium-instancecontainer")
+                ("user", InstanceContainer.Version):       (self.ResourceTypes.UserInstanceContainer, "application/x-uranium-instancecontainer")
             }
         )
 
@@ -305,11 +325,26 @@ class CuraApplication(QtApplication):
     ## A reusable dialogbox
     #
     showMessageBox = pyqtSignal(str, str, str, str, int, int, arguments = ["title", "text", "informativeText", "detailedText", "buttons", "icon"])
+
     def messageBox(self, title, text, informativeText = "", detailedText = "", buttons = QMessageBox.Ok, icon = QMessageBox.NoIcon, callback = None, callback_arguments = []):
         self._message_box_callback = callback
         self._message_box_callback_arguments = callback_arguments
         self.showMessageBox.emit(title, text, informativeText, detailedText, buttons, icon)
 
+    showDiscardOrKeepProfileChanges = pyqtSignal()
+
+    def discardOrKeepProfileChanges(self):
+        self.showDiscardOrKeepProfileChanges.emit()
+
+    @pyqtSlot(str)
+    def discardOrKeepProfileChangesClosed(self, option):
+        if option == "discard":
+            global_stack = self.getGlobalContainerStack()
+            for extruder in ExtruderManager.getInstance().getMachineExtruders(global_stack.getId()):
+                extruder.getTop().clear()
+
+            global_stack.getTop().clear()
+
     @pyqtSlot(int)
     def messageBoxClosed(self, button):
         if self._message_box_callback:
@@ -400,7 +435,11 @@ class CuraApplication(QtApplication):
 
     @pyqtSlot(str, str)
     def setDefaultPath(self, key, default_path):
-        Preferences.getInstance().setValue("local_file/%s" % key, QUrl.toLocalFile(default_path))
+        Preferences.getInstance().setValue("local_file/%s" % key, QUrl(default_path).toLocalFile())
+
+    @classmethod
+    def getStaticVersion(cls):
+        return CuraVersion
 
     ##  Handle loading of all plugin types (and the backend explicitly)
     #   \sa PluginRegistery
@@ -420,16 +459,111 @@ class CuraApplication(QtApplication):
 
         self._plugins_loaded = True
 
+    @classmethod
     def addCommandLineOptions(self, parser):
         super().addCommandLineOptions(parser)
         parser.add_argument("file", nargs="*", help="Files to load after starting the application.")
+        parser.add_argument("--single-instance", action="store_true", default=False)
+
+    # Set up a local socket server which listener which coordinates single instances Curas and accepts commands.
+    def _setUpSingleInstanceServer(self):
+        if self.getCommandLineOption("single_instance", False):
+            self.__single_instance_server = QLocalServer()
+            self.__single_instance_server.newConnection.connect(self._singleInstanceServerNewConnection)
+            self.__single_instance_server.listen("ultimaker-cura")
+
+    def _singleInstanceServerNewConnection(self):
+        Logger.log("i", "New connection recevied on our single-instance server")
+        remote_cura_connection = self.__single_instance_server.nextPendingConnection()
+
+        if remote_cura_connection is not None:
+            def readCommands():
+                line = remote_cura_connection.readLine()
+                while len(line) != 0:    # There is also a .canReadLine()
+                    try:
+                        payload = json.loads(str(line, encoding="ASCII").strip())
+                        command = payload["command"]
+
+                        # Command: Remove all models from the build plate.
+                        if command == "clear-all":
+                            self.deleteAll()
+
+                        # Command: Load a model file
+                        elif command == "open":
+                            self._openFile(payload["filePath"])
+                            # WARNING ^ this method is async and we really should wait until
+                            # the file load is complete before processing more commands.
+
+                        # Command: Activate the window and bring it to the top.
+                        elif command == "focus":
+                            # Operating systems these days prevent windows from moving around by themselves.
+                            # 'alert' or flashing the icon in the taskbar is the best thing we do now.
+                            self.getMainWindow().alert(0)
+
+                        # Command: Close the socket connection. We're done.
+                        elif command == "close-connection":
+                            remote_cura_connection.close()
+
+                        else:
+                            Logger.log("w", "Received an unrecognized command " + str(command))
+                    except json.decoder.JSONDecodeError as ex:
+                        Logger.log("w", "Unable to parse JSON command in _singleInstanceServerNewConnection(): " + repr(ex))
+                    line = remote_cura_connection.readLine()
+
+            remote_cura_connection.readyRead.connect(readCommands)
+
+    ##  Perform any checks before creating the main application.
+    #
+    #   This should be called directly before creating an instance of CuraApplication.
+    #   \returns \type{bool} True if the whole Cura app should continue running.
+    @classmethod
+    def preStartUp(cls):
+        # Peek the arguments and look for the 'single-instance' flag.
+        parser = argparse.ArgumentParser(prog="cura")  # pylint: disable=bad-whitespace
+        CuraApplication.addCommandLineOptions(parser)
+        parsed_command_line = vars(parser.parse_args())
+
+        if "single_instance" in parsed_command_line and parsed_command_line["single_instance"]:
+            Logger.log("i", "Checking for the presence of an ready running Cura instance.")
+            single_instance_socket = QLocalSocket()
+            Logger.log("d", "preStartUp(): full server name: " + single_instance_socket.fullServerName())
+            single_instance_socket.connectToServer("ultimaker-cura")
+            single_instance_socket.waitForConnected()
+            if single_instance_socket.state() == QLocalSocket.ConnectedState:
+                Logger.log("i", "Connection has been made to the single-instance Cura socket.")
+
+                # Protocol is one line of JSON terminated with a carriage return.
+                # "command" field is required and holds the name of the command to execute.
+                # Other fields depend on the command.
+
+                payload = {"command": "clear-all"}
+                single_instance_socket.write(bytes(json.dumps(payload) + "\n", encoding="ASCII"))
+
+                payload = {"command": "focus"}
+                single_instance_socket.write(bytes(json.dumps(payload) + "\n", encoding="ASCII"))
+
+                if len(parsed_command_line["file"]) != 0:
+                    for filename in parsed_command_line["file"]:
+                        payload = {"command": "open", "filePath": filename}
+                        single_instance_socket.write(bytes(json.dumps(payload) + "\n", encoding="ASCII"))
+
+                payload = {"command": "close-connection"}
+                single_instance_socket.write(bytes(json.dumps(payload) + "\n", encoding="ASCII"))
+
+                single_instance_socket.flush()
+                single_instance_socket.waitForDisconnected()
+                return False
+        return True
 
     def run(self):
         self.showSplashMessage(self._i18n_catalog.i18nc("@info:progress", "Setting up scene..."))
 
+        self._setUpSingleInstanceServer()
+
         controller = self.getController()
 
         controller.setActiveView("SolidView")
+
         controller.setCameraTool("CameraTool")
         controller.setSelectionTool("SelectionTool")
 
@@ -462,9 +596,11 @@ class CuraApplication(QtApplication):
         self.showSplashMessage(self._i18n_catalog.i18nc("@info:progress", "Loading interface..."))
 
         # Initialise extruder so as to listen to global container stack changes before the first global container stack is set.
-        cura.Settings.ExtruderManager.getInstance()
+        ExtruderManager.getInstance()
-        qmlRegisterSingletonType(cura.Settings.MachineManager, "Cura", 1, 0, "MachineManager", self.getMachineManager)
+        qmlRegisterSingletonType(MachineManager, "Cura", 1, 0, "MachineManager", self.getMachineManager)
-        qmlRegisterSingletonType(cura.Settings.SettingInheritanceManager, "Cura", 1, 0, "SettingInheritanceManager", self.getSettingInheritanceManager)
+        qmlRegisterSingletonType(SettingInheritanceManager, "Cura", 1, 0, "SettingInheritanceManager",
+                         self.getSettingInheritanceManager)
+
         qmlRegisterSingletonType(MachineActionManager.MachineActionManager, "Cura", 1, 0, "MachineActionManager", self.getMachineActionManager)
         self.setMainQml(Resources.getPath(self.ResourceTypes.QmlFiles, "Cura.qml"))
         self._qml_import_paths.append(Resources.getPath(self.ResourceTypes.QmlFiles))
@@ -484,12 +620,12 @@ class CuraApplication(QtApplication):
 
     def getMachineManager(self, *args):
         if self._machine_manager is None:
-            self._machine_manager = cura.Settings.MachineManager.createMachineManager()
+            self._machine_manager = MachineManager.createMachineManager()
         return self._machine_manager
 
     def getSettingInheritanceManager(self, *args):
         if self._setting_inheritance_manager is None:
-            self._setting_inheritance_manager = cura.Settings.SettingInheritanceManager.createSettingInheritanceManager()
+            self._setting_inheritance_manager = SettingInheritanceManager.createSettingInheritanceManager()
         return self._setting_inheritance_manager
 
     ##  Get the machine action manager
@@ -525,23 +661,24 @@ class CuraApplication(QtApplication):
 
         qmlRegisterUncreatableType(CuraApplication, "Cura", 1, 0, "ResourceTypes", "Just an Enum type")
 
-        qmlRegisterType(cura.Settings.ExtrudersModel, "Cura", 1, 0, "ExtrudersModel")
+        qmlRegisterType(ExtrudersModel, "Cura", 1, 0, "ExtrudersModel")
 
-        qmlRegisterType(cura.Settings.ContainerSettingsModel, "Cura", 1, 0, "ContainerSettingsModel")
+        qmlRegisterType(ContainerSettingsModel, "Cura", 1, 0, "ContainerSettingsModel")
-        qmlRegisterSingletonType(cura.Settings.ProfilesModel, "Cura", 1, 0, "ProfilesModel", cura.Settings.ProfilesModel.createProfilesModel)
+        qmlRegisterSingletonType(ProfilesModel, "Cura", 1, 0, "ProfilesModel", ProfilesModel.createProfilesModel)
-        qmlRegisterType(cura.Settings.QualityAndUserProfilesModel, "Cura", 1, 0, "QualityAndUserProfilesModel")
+        qmlRegisterType(QualityAndUserProfilesModel, "Cura", 1, 0, "QualityAndUserProfilesModel")
-        qmlRegisterType(cura.Settings.UserProfilesModel, "Cura", 1, 0, "UserProfilesModel")
+        qmlRegisterType(UserProfilesModel, "Cura", 1, 0, "UserProfilesModel")
-        qmlRegisterType(cura.Settings.MaterialSettingsVisibilityHandler, "Cura", 1, 0, "MaterialSettingsVisibilityHandler")
+        qmlRegisterType(MaterialSettingsVisibilityHandler, "Cura", 1, 0, "MaterialSettingsVisibilityHandler")
-        qmlRegisterType(cura.Settings.QualitySettingsModel, "Cura", 1, 0, "QualitySettingsModel")
+        qmlRegisterType(QualitySettingsModel, "Cura", 1, 0, "QualitySettingsModel")
-        qmlRegisterType(cura.Settings.MachineNameValidator, "Cura", 1, 0, "MachineNameValidator")
+        qmlRegisterType(MachineNameValidator, "Cura", 1, 0, "MachineNameValidator")
+        qmlRegisterType(UserChangesModel, "Cura", 1, 1, "UserChangesModel")
 
-        qmlRegisterSingletonType(cura.Settings.ContainerManager, "Cura", 1, 0, "ContainerManager", cura.Settings.ContainerManager.createContainerManager)
+        qmlRegisterSingletonType(ContainerManager, "Cura", 1, 0, "ContainerManager", ContainerManager.createContainerManager)
 
         # As of Qt5.7, it is necessary to get rid of any ".." in the path for the singleton to work.
         actions_url = QUrl.fromLocalFile(os.path.abspath(Resources.getPath(CuraApplication.ResourceTypes.QmlFiles, "Actions.qml")))
         qmlRegisterSingletonType(actions_url, "Cura", 1, 0, "Actions")
 
-        engine.rootContext().setContextProperty("ExtruderManager", cura.Settings.ExtruderManager.getInstance())
+        engine.rootContext().setContextProperty("ExtruderManager", ExtruderManager.getInstance())
 
         for path in Resources.getAllResourcesOfType(CuraApplication.ResourceTypes.QmlFiles):
             type_name = os.path.splitext(os.path.basename(path))[0]
@@ -550,6 +687,13 @@ class CuraApplication(QtApplication):
 
             qmlRegisterType(QUrl.fromLocalFile(path), "Cura", 1, 0, type_name)
 
+    ##  Get the backend of the application (the program that does the heavy lifting).
+    #   The backend is also a QObject, which can be used from qml.
+    #   \returns Backend \type{Backend}
+    @pyqtSlot(result = "QObject*")
+    def getBackend(self):
+        return self._backend
+
     def onSelectionChanged(self):
         if Selection.hasSelection():
             if self.getController().getActiveTool():
@@ -574,7 +718,7 @@ class CuraApplication(QtApplication):
                 self.getController().setActiveTool(None)
 
     def _onToolOperationStopped(self, event):
-        if self._center_after_select:
+        if self._center_after_select and Selection.getSelectedObject(0) is not None:
             self._center_after_select = False
             self._camera_animation.setStart(self.getController().getTool("CameraTool").getOrigin())
             self._camera_animation.setTarget(Selection.getSelectedObject(0).getWorldPosition())
@@ -585,7 +729,7 @@ class CuraApplication(QtApplication):
     sceneBoundingBoxChanged = pyqtSignal()
 
     @pyqtProperty(bool, notify = activityChanged)
-    def getPlatformActivity(self):
+    def platformActivity(self):
         return self._platform_activity
 
     @pyqtProperty(str, notify = sceneBoundingBoxChanged)

cura/Layer.py

@@ -49,12 +49,12 @@ class Layer:
 
         return result
 
-    def build(self, vertex_offset, index_offset, vertices, colors, indices):
+    def build(self, vertex_offset, index_offset, vertices, colors, line_dimensions, extruders, line_types, indices):
         result_vertex_offset = vertex_offset
         result_index_offset = index_offset
         self._element_count = 0
         for polygon in self._polygons:
-            polygon.build(result_vertex_offset, result_index_offset, vertices, colors, indices)
+            polygon.build(result_vertex_offset, result_index_offset, vertices, colors, line_dimensions, extruders, line_types, indices)
             result_vertex_offset += polygon.lineMeshVertexCount()
             result_index_offset += polygon.lineMeshElementCount()
             self._element_count += polygon.elementCount

cura/LayerData.py

@@ -6,9 +6,9 @@ from UM.Mesh.MeshData import MeshData
 # Immutable, use LayerDataBuilder to create one of these.
 class LayerData(MeshData):
     def __init__(self, vertices = None, normals = None, indices = None, colors = None, uvs = None, file_name = None,
-        center_position = None, layers=None, element_counts=None):
+        center_position = None, layers=None, element_counts=None, attributes=None):
         super().__init__(vertices=vertices, normals=normals, indices=indices, colors=colors, uvs=uvs,
-                         file_name=file_name, center_position=center_position)
+                         file_name=file_name, center_position=center_position, attributes=attributes)
         self._layers = layers
         self._element_counts = element_counts
 

cura/LayerDataBuilder.py

@@ -48,7 +48,11 @@ class LayerDataBuilder(MeshBuilder):
 
         self._layers[layer].setThickness(thickness)
 
-    def build(self):
+    ##  Return the layer data as LayerData.
+    #
+    #   \param material_color_map: [r, g, b, a] for each extruder row.
+    #   \param line_type_brightness: compatibility layer view uses line type brightness of 0.5
+    def build(self, material_color_map, line_type_brightness = 1.0):
         vertex_count = 0
         index_count = 0
         for layer, data in self._layers.items():
@@ -56,20 +60,56 @@ class LayerDataBuilder(MeshBuilder):
             index_count += data.lineMeshElementCount()
 
         vertices = numpy.empty((vertex_count, 3), numpy.float32)
+        line_dimensions = numpy.empty((vertex_count, 2), numpy.float32)
         colors = numpy.empty((vertex_count, 4), numpy.float32)
         indices = numpy.empty((index_count, 2), numpy.int32)
+        extruders = numpy.empty((vertex_count), numpy.int32)  # Only usable for newer OpenGL versions
+        line_types = numpy.empty((vertex_count), numpy.float32)
 
         vertex_offset = 0
         index_offset = 0
         for layer, data in self._layers.items():
-            ( vertex_offset, index_offset ) = data.build( vertex_offset, index_offset, vertices, colors, indices)
+            ( vertex_offset, index_offset ) = data.build( vertex_offset, index_offset, vertices, colors, line_dimensions, extruders, line_types, indices)
             self._element_counts[layer] = data.elementCount
 
         self.addVertices(vertices)
+        colors[:, 0:3] *= line_type_brightness
         self.addColors(colors)
         self.addIndices(indices.flatten())
 
+        # Note: we're using numpy indexing here.
+        # See also: https://docs.scipy.org/doc/numpy/reference/arrays.indexing.html
+        material_colors = numpy.zeros((line_dimensions.shape[0], 4), dtype=numpy.float32)
+        for extruder_nr in range(material_color_map.shape[0]):
+            material_colors[extruders == extruder_nr] = material_color_map[extruder_nr]
+        # Set material_colors with indices where line_types (also numpy array) == MoveCombingType
+        material_colors[line_types == LayerPolygon.MoveCombingType] = colors[line_types == LayerPolygon.MoveCombingType]
+        material_colors[line_types == LayerPolygon.MoveRetractionType] = colors[line_types == LayerPolygon.MoveRetractionType]
+
+        attributes = {
+            "line_dimensions": {
+                "value": line_dimensions,
+                "opengl_name": "a_line_dim",
+                "opengl_type": "vector2f"
+                },
+            "extruders": {
+                "value": extruders,
+                "opengl_name": "a_extruder",
+                "opengl_type": "float"  # Strangely enough, the type has to be float while it is actually an int.
+                },
+            "colors": {
+                "value": material_colors,
+                "opengl_name": "a_material_color",
+                "opengl_type": "vector4f"
+                },
+            "line_types": {
+                "value": line_types,
+                "opengl_name": "a_line_type",
+                "opengl_type": "float"
+                }
+            }
+
         return LayerData(vertices=self.getVertices(), normals=self.getNormals(), indices=self.getIndices(),
                         colors=self.getColors(), uvs=self.getUVCoordinates(), file_name=self.getFileName(),
                         center_position=self.getCenterPosition(), layers=self._layers,
-                        element_counts=self._element_counts)
+                        element_counts=self._element_counts, attributes=attributes)

cura/LayerPolygon.py

@@ -1,6 +1,6 @@
 from UM.Math.Color import Color
 from UM.Application import Application
-
+from typing import Any
 import numpy
 
 
@@ -19,13 +19,19 @@ class LayerPolygon:
     
     __jump_map = numpy.logical_or(numpy.logical_or(numpy.arange(11) == NoneType, numpy.arange(11) == MoveCombingType), numpy.arange(11) == MoveRetractionType)
     
-    def __init__(self, mesh, extruder, line_types, data, line_widths):
+    ##  LayerPolygon, used in ProcessSlicedLayersJob
-        self._mesh = mesh
+    #   \param extruder
+    #   \param line_types array with line_types
+    #   \param data new_points
+    #   \param line_widths array with line widths
+    #   \param line_thicknesses: array with type as index and thickness as value
+    def __init__(self, extruder, line_types, data, line_widths, line_thicknesses):
         self._extruder = extruder
         self._types = line_types
         self._data = data
         self._line_widths = line_widths
-        
+        self._line_thicknesses = line_thicknesses
+
         self._vertex_begin = 0
         self._vertex_end = 0
         self._index_begin = 0
@@ -38,7 +44,7 @@ class LayerPolygon:
 
         # Buffering the colors shouldn't be necessary as it is not 
         # re-used and can save alot of memory usage.
-        self._color_map = LayerPolygon.getColorMap() * [1, 1, 1, self._extruder] # The alpha component is used to store the extruder nr
+        self._color_map = LayerPolygon.getColorMap()
         self._colors = self._color_map[self._types]
         
         # When type is used as index returns true if type == LayerPolygon.InfillType or type == LayerPolygon.SkinType or type == LayerPolygon.SupportInfillType
@@ -50,7 +56,7 @@ class LayerPolygon:
         
     def buildCache(self):
         # For the line mesh we do not draw Infill or Jumps. Therefore those lines are filtered out.
-        self._build_cache_line_mesh_mask = numpy.logical_not(numpy.logical_or(self._jump_mask, self._types == LayerPolygon.InfillType ))
+        self._build_cache_line_mesh_mask = numpy.ones(self._jump_mask.shape, dtype=bool)
         mesh_line_count = numpy.sum(self._build_cache_line_mesh_mask)
         self._index_begin = 0
         self._index_end = mesh_line_count
@@ -60,13 +66,23 @@ class LayerPolygon:
         self._build_cache_needed_points[1:, 0][:, numpy.newaxis] = self._types[1:] != self._types[:-1]
         # Mark points as unneeded if they are of types we don't want in the line mesh according to the calculated mask
         numpy.logical_and(self._build_cache_needed_points, self._build_cache_line_mesh_mask, self._build_cache_needed_points )
-        
+
         self._vertex_begin = 0
         self._vertex_end = numpy.sum( self._build_cache_needed_points )
-        
 
-    def build(self, vertex_offset, index_offset, vertices, colors, indices):
+    ##  Set all the arrays provided by the function caller, representing the LayerPolygon
-        if (self._build_cache_line_mesh_mask is None) or (self._build_cache_needed_points is None ):
+    #   The arrays are either by vertex or by indices.
+    #
+    #   \param vertex_offset : determines where to start and end filling the arrays
+    #   \param index_offset : determines where to start and end filling the arrays
+    #   \param vertices : vertex numpy array to be filled
+    #   \param colors : vertex numpy array to be filled
+    #   \param line_dimensions : vertex numpy array to be filled
+    #   \param extruders : vertex numpy array to be filled
+    #   \param line_types : vertex numpy array to be filled
+    #   \param indices : index numpy array to be filled
+    def build(self, vertex_offset, index_offset, vertices, colors, line_dimensions, extruders, line_types, indices):
+        if self._build_cache_line_mesh_mask is None or self._build_cache_needed_points is None:
             self.buildCache()
             
         line_mesh_mask = self._build_cache_line_mesh_mask
@@ -83,9 +99,18 @@ class LayerPolygon:
         
         # Points are picked based on the index list to get the vertices needed. 
         vertices[self._vertex_begin:self._vertex_end, :] = self._data[index_list, :]
+
         # Create an array with colors for each vertex and remove the color data for the points that has been thrown away. 
-        colors[self._vertex_begin:self._vertex_end, :] = numpy.tile(self._colors, (1, 2)).reshape((-1, 4))[needed_points_list.ravel()] 
+        colors[self._vertex_begin:self._vertex_end, :] = numpy.tile(self._colors, (1, 2)).reshape((-1, 4))[needed_points_list.ravel()]
-        colors[self._vertex_begin:self._vertex_end, :] *= numpy.array([[0.5, 0.5, 0.5, 1.0]], numpy.float32)
+
+        # Create an array with line widths for each vertex.
+        line_dimensions[self._vertex_begin:self._vertex_end, 0] = numpy.tile(self._line_widths, (1, 2)).reshape((-1, 1))[needed_points_list.ravel()][:, 0]
+        line_dimensions[self._vertex_begin:self._vertex_end, 1] = numpy.tile(self._line_thicknesses, (1, 2)).reshape((-1, 1))[needed_points_list.ravel()][:, 0]
+
+        extruders[self._vertex_begin:self._vertex_end] = self._extruder
+
+        # Convert type per vertex to type per line
+        line_types[self._vertex_begin:self._vertex_end] = numpy.tile(self._types, (1, 2)).reshape((-1, 1))[needed_points_list.ravel()][:, 0]
 
         # The relative values of begin and end indices have already been set in buildCache, so we only need to offset them to the parents offset.
         self._index_begin += index_offset
@@ -173,7 +198,7 @@ class LayerPolygon:
 
         return normals
 
-    __color_map = None
+    __color_map = None # type: numpy.ndarray[Any]
 
     ##  Gets the instance of the VersionUpgradeManager, or creates one.
     @classmethod

cura/PrintInformation.py

@@ -7,9 +7,9 @@ from UM.FlameProfiler import pyqtSlot
 from UM.Application import Application
 from UM.Qt.Duration import Duration
 from UM.Preferences import Preferences
-from UM.Settings import ContainerRegistry
+from UM.Settings.ContainerRegistry import ContainerRegistry
 
-import cura.Settings.ExtruderManager
+from cura.Settings.ExtruderManager import ExtruderManager
 
 import math
 import os.path
@@ -124,7 +124,7 @@ class PrintInformation(QObject):
 
         material_preference_values = json.loads(Preferences.getInstance().getValue("cura/material_settings"))
 
-        extruder_stacks = list(cura.Settings.ExtruderManager.getInstance().getMachineExtruders(Application.getInstance().getGlobalContainerStack().getId()))
+        extruder_stacks = list(ExtruderManager.getInstance().getMachineExtruders(Application.getInstance().getGlobalContainerStack().getId()))
         for index, amount in enumerate(self._material_amounts):
             ## Find the right extruder stack. As the list isn't sorted because it's a annoying generator, we do some
             #  list comprehension filtering to solve this for us.
@@ -200,11 +200,16 @@ class PrintInformation(QObject):
 
     @pyqtSlot(str, result = str)
     def createJobName(self, base_name):
+        if base_name == "":
+            return ""
         base_name = self._stripAccents(base_name)
         self._setAbbreviatedMachineName()
         if self._pre_sliced:
             return catalog.i18nc("@label", "Pre-sliced file {0}", base_name)
         elif Preferences.getInstance().getValue("cura/jobname_prefix"):
+            # Don't add abbreviation if it already has the exact same abbreviation.
+            if base_name.startswith(self._abbr_machine + "_"):
+                return base_name
             return self._abbr_machine + "_" + base_name
         else:
             return base_name

cura/PrinterOutputDevice.py

@@ -1,12 +1,14 @@
+# Copyright (c) 2017 Ultimaker B.V.
+# Cura is released under the terms of the AGPLv3 or higher.
+
 from UM.i18n import i18nCatalog
 from UM.OutputDevice.OutputDevice import OutputDevice
-from PyQt5.QtCore import pyqtProperty, pyqtSignal, pyqtSlot, QObject
+from PyQt5.QtCore import pyqtProperty, pyqtSignal, pyqtSlot, QObject, QTimer
 from PyQt5.QtWidgets import QMessageBox
-import UM.Settings.ContainerRegistry
-
 from enum import IntEnum  # For the connection state tracking.
+
+from UM.Settings.ContainerRegistry import ContainerRegistry
 from UM.Logger import Logger
-from UM.Application import Application
 from UM.Signal import signalemitter
 
 i18n_catalog = i18nCatalog("cura")
@@ -25,7 +27,7 @@ class PrinterOutputDevice(QObject, OutputDevice):
     def __init__(self, device_id, parent = None):
         super().__init__(device_id = device_id, parent = parent)
 
-        self._container_registry = UM.Settings.ContainerRegistry.getInstance()
+        self._container_registry = ContainerRegistry.getInstance()
         self._target_bed_temperature = 0
         self._bed_temperature = 0
         self._num_extruders = 1
@@ -45,6 +47,10 @@ class PrinterOutputDevice(QObject, OutputDevice):
         self._job_name = ""
         self._error_text = ""
         self._accepts_commands = True
+        self._preheat_bed_timeout = 900 #Default time-out for pre-heating the bed, in seconds.
+        self._preheat_bed_timer = QTimer() #Timer that tracks how long to preheat still.
+        self._preheat_bed_timer.setSingleShot(True)
+        self._preheat_bed_timer.timeout.connect(self.cancelPreheatBed)
 
         self._printer_state = ""
         self._printer_type = "unknown"
@@ -102,6 +108,9 @@ class PrinterOutputDevice(QObject, OutputDevice):
 
     printerTypeChanged = pyqtSignal()
 
+    # Signal to be emitted when some drastic change occurs in the remaining time (not when the time just passes on normally).
+    preheatBedRemainingTimeChanged = pyqtSignal()
+
     @pyqtProperty(str, notify=printerTypeChanged)
     def printerType(self):
         return self._printer_type
@@ -161,6 +170,17 @@ class PrinterOutputDevice(QObject, OutputDevice):
             self._job_name = name
             self.jobNameChanged.emit()
 
+    ##  Gives a human-readable address where the device can be found.
+    @pyqtProperty(str, constant = True)
+    def address(self):
+        Logger.log("w", "address is not implemented by this output device.")
+
+    ##  A human-readable name for the device.
+    @pyqtProperty(str, constant = True)
+    def name(self):
+        Logger.log("w", "name is not implemented by this output device.")
+        return ""
+
     @pyqtProperty(str, notify = errorTextChanged)
     def errorText(self):
         return self._error_text
@@ -199,6 +219,26 @@ class PrinterOutputDevice(QObject, OutputDevice):
             self._target_bed_temperature = temperature
             self.targetBedTemperatureChanged.emit()
 
+    ##  The total duration of the time-out to pre-heat the bed, in seconds.
+    #
+    #   \return The duration of the time-out to pre-heat the bed, in seconds.
+    @pyqtProperty(int, constant = True)
+    def preheatBedTimeout(self):
+        return self._preheat_bed_timeout
+
+    ##  The remaining duration of the pre-heating of the bed.
+    #
+    #   This is formatted in M:SS format.
+    #   \return The duration of the time-out to pre-heat the bed, formatted.
+    @pyqtProperty(str, notify = preheatBedRemainingTimeChanged)
+    def preheatBedRemainingTime(self):
+        period = self._preheat_bed_timer.remainingTime()
+        if period <= 0:
+            return ""
+        minutes, period = divmod(period, 60000) #60000 milliseconds in a minute.
+        seconds, _ = divmod(period, 1000) #1000 milliseconds in a second.
+        return "%d:%02d" % (minutes, seconds)
+
     ## Time the print has been printing.
     #  Note that timeTotal - timeElapsed should give time remaining.
     @pyqtProperty(float, notify = timeElapsedChanged)
@@ -254,6 +294,22 @@ class PrinterOutputDevice(QObject, OutputDevice):
     def _setTargetBedTemperature(self, temperature):
         Logger.log("w", "_setTargetBedTemperature is not implemented by this output device")
 
+    ##  Pre-heats the heated bed of the printer.
+    #
+    #   \param temperature The temperature to heat the bed to, in degrees
+    #   Celsius.
+    #   \param duration How long the bed should stay warm, in seconds.
+    @pyqtSlot(float, float)
+    def preheatBed(self, temperature, duration):
+        Logger.log("w", "preheatBed is not implemented by this output device.")
+
+    ##  Cancels pre-heating the heated bed of the printer.
+    #
+    #   If the bed is not pre-heated, nothing happens.
+    @pyqtSlot()
+    def cancelPreheatBed(self):
+        Logger.log("w", "cancelPreheatBed is not implemented by this output device.")
+
     ##  Protected setter for the current bed temperature.
     #   This simply sets the bed temperature, but ensures that a signal is emitted.
     #   /param temperature temperature of the bed.
@@ -323,6 +379,28 @@ class PrinterOutputDevice(QObject, OutputDevice):
                 result.append(i18n_catalog.i18nc("@item:material", "Unknown material"))
         return result
 
+    ##  List of the colours of the currently loaded materials.
+    #
+    #   The list is in order of extruders. If there is no material in an
+    #   extruder, the colour is shown as transparent.
+    #
+    #   The colours are returned in hex-format AARRGGBB or RRGGBB
+    #   (e.g. #800000ff for transparent blue or #00ff00 for pure green).
+    @pyqtProperty("QVariantList", notify = materialIdChanged)
+    def materialColors(self):
+        result = []
+        for material_id in self._material_ids:
+            if material_id is None:
+                result.append("#00000000") #No material.
+                continue
+
+            containers = self._container_registry.findInstanceContainers(type = "material", GUID = material_id)
+            if containers:
+                result.append(containers[0].getMetaDataEntry("color_code"))
+            else:
+                result.append("#00000000") #Unknown material.
+        return result
+
     ##  Protected setter for the current material id.
     #   /param index Index of the extruder
     #   /param material_id id of the material
@@ -340,10 +418,14 @@ class PrinterOutputDevice(QObject, OutputDevice):
     #   /param index Index of the extruder
     #   /param hotend_id id of the hotend
     def _setHotendId(self, index, hotend_id):
-        if hotend_id and hotend_id != "" and hotend_id != self._hotend_ids[index]:
+        if hotend_id and hotend_id != self._hotend_ids[index]:
             Logger.log("d", "Setting hotend id of hotend %d to %s" % (index, hotend_id))
             self._hotend_ids[index] = hotend_id
             self.hotendIdChanged.emit(index, hotend_id)
+        elif not hotend_id:
+            Logger.log("d", "Removing hotend id of hotend %d.", index)
+            self._hotend_ids[index] = None
+            self.hotendIdChanged.emit(index, None)
 
     ##  Let the user decide if the hotends and/or material should be synced with the printer
     #   NB: the UX needs to be implemented by the plugin

cura/QualityManager.py

@@ -1,12 +1,16 @@
 # Copyright (c) 2016 Ultimaker B.V.
 # Cura is released under the terms of the AGPLv3 or higher.
 
-import UM.Application
-import cura.Settings.ExtruderManager
-import UM.Settings.ContainerRegistry
-
 # This collects a lot of quality and quality changes related code which was split between ContainerManager
 # and the MachineManager and really needs to usable from both.
+from typing import List
+
+from UM.Application import Application
+from UM.Settings.ContainerRegistry import ContainerRegistry
+from UM.Settings.DefinitionContainer import DefinitionContainer
+from UM.Settings.InstanceContainer import InstanceContainer
+from cura.Settings.ExtruderManager import ExtruderManager
+
 
 class QualityManager:
 
@@ -18,7 +22,7 @@ class QualityManager:
             QualityManager.__instance = cls()
         return QualityManager.__instance
 
-    __instance = None
+    __instance = None   # type: "QualityManager"
 
     ##  Find a quality by name for a specific machine definition and materials.
     #
@@ -121,14 +125,14 @@ class QualityManager:
     #
     #   \param machine_definition \type{DefinitionContainer} the machine definition.
     #   \return \type{List[InstanceContainer]} the list of quality changes
-    def findAllQualityChangesForMachine(self, machine_definition):
+    def findAllQualityChangesForMachine(self, machine_definition: DefinitionContainer) -> List[InstanceContainer]:
         if machine_definition.getMetaDataEntry("has_machine_quality"):
             definition_id = machine_definition.getId()
         else:
             definition_id = "fdmprinter"
 
         filter_dict = { "type": "quality_changes", "extruder": None, "definition": definition_id }
-        quality_changes_list = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(**filter_dict)
+        quality_changes_list = ContainerRegistry.getInstance().findInstanceContainers(**filter_dict)
         return quality_changes_list
 
     ##  Find all usable qualities for a machine and extruders.
@@ -177,7 +181,7 @@ class QualityManager:
         if base_material:
             # There is a basic material specified
             criteria = { "type": "material", "name": base_material, "definition": definition_id }
-            containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(**criteria)
+            containers = ContainerRegistry.getInstance().findInstanceContainers(**criteria)
             containers = [basic_material for basic_material in containers if
                                basic_material.getMetaDataEntry("variant") == material_container.getMetaDataEntry(
                                    "variant")]
@@ -191,13 +195,13 @@ class QualityManager:
     def _getFilteredContainersForStack(self, machine_definition=None, material_containers=None, **kwargs):
         # Fill in any default values.
         if machine_definition is None:
-            machine_definition = UM.Application.getInstance().getGlobalContainerStack().getBottom()
+            machine_definition = Application.getInstance().getGlobalContainerStack().getBottom()
             quality_definition_id = machine_definition.getMetaDataEntry("quality_definition")
             if quality_definition_id is not None:
-                machine_definition = UM.Settings.ContainerRegistry.getInstance().findDefinitionContainers(id=quality_definition_id)[0]
+                machine_definition = ContainerRegistry.getInstance().findDefinitionContainers(id=quality_definition_id)[0]
 
         if material_containers is None:
-            active_stacks = cura.Settings.ExtruderManager.getInstance().getActiveGlobalAndExtruderStacks()
+            active_stacks = ExtruderManager.getInstance().getActiveGlobalAndExtruderStacks()
             material_containers = [stack.findContainer(type="material") for stack in active_stacks]
 
         criteria = kwargs
@@ -225,7 +229,7 @@ class QualityManager:
                         material_ids.add(basic_material.getId())
                     material_ids.add(material_instance.getId())
 
-        containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(**criteria)
+        containers = ContainerRegistry.getInstance().findInstanceContainers(**criteria)
 
         result = []
         for container in containers:
@@ -241,8 +245,8 @@ class QualityManager:
     #               an extruder definition.
     #    \return  \type{DefinitionContainer} the parent machine definition. If the given machine
     #               definition doesn't have a parent then it is simply returned.
-    def getParentMachineDefinition(self, machine_definition):
+    def getParentMachineDefinition(self, machine_definition: DefinitionContainer) -> DefinitionContainer:
-        container_registry = UM.Settings.ContainerRegistry.getInstance()
+        container_registry = ContainerRegistry.getInstance()
 
         machine_entry = machine_definition.getMetaDataEntry("machine")
         if machine_entry is None:
@@ -277,6 +281,6 @@ class QualityManager:
             # This already is a 'global' machine definition.
             return machine_definition
         else:
-            container_registry = UM.Settings.ContainerRegistry.getInstance()
+            container_registry = ContainerRegistry.getInstance()
             whole_machine = container_registry.findDefinitionContainers(id=machine_entry)[0]
             return whole_machine

cura/Settings/ContainerManager.py

@@ -3,24 +3,31 @@
 
 import os.path
 import urllib
+from typing import Dict, Union
 
-from PyQt5.QtCore import QObject, pyqtProperty, pyqtSignal, QUrl, QVariant
+from PyQt5.QtCore import QObject, QUrl, QVariant
 from UM.FlameProfiler import pyqtSlot
 from PyQt5.QtWidgets import QMessageBox
 
-import UM.PluginRegistry
+from UM.PluginRegistry import PluginRegistry
-import UM.Settings
+from UM.SaveFile import SaveFile
-import UM.SaveFile
+from UM.Platform import Platform
-import UM.Platform
+from UM.MimeTypeDatabase import MimeTypeDatabase
-import UM.MimeTypeDatabase
-import UM.Logger
 
-import cura.Settings
+from UM.Logger import Logger
+from UM.Application import Application
+from UM.Settings.ContainerStack import ContainerStack
+from UM.Settings.DefinitionContainer import DefinitionContainer
+from UM.Settings.InstanceContainer import InstanceContainer
 from cura.QualityManager import QualityManager
 
 from UM.MimeTypeDatabase import MimeTypeNotFoundError
+from UM.Settings.ContainerRegistry import ContainerRegistry
 
 from UM.i18n import i18nCatalog
+
+from cura.Settings.ExtruderManager import ExtruderManager
+
 catalog = i18nCatalog("cura")
 
 ##  Manager class that contains common actions to deal with containers in Cura.
@@ -32,9 +39,8 @@ class ContainerManager(QObject):
     def __init__(self, parent = None):
         super().__init__(parent)
 
-        self._container_registry = UM.Settings.ContainerRegistry.getInstance()
+        self._container_registry = ContainerRegistry.getInstance()
-        self._machine_manager = UM.Application.getInstance().getMachineManager()
+        self._machine_manager = Application.getInstance().getMachineManager()
-
         self._container_name_filters = {}
 
     ##  Create a duplicate of the specified container
@@ -49,7 +55,7 @@ class ContainerManager(QObject):
     def duplicateContainer(self, container_id):
         containers = self._container_registry.findContainers(None, id = container_id)
         if not containers:
-            UM.Logger.log("w", "Could duplicate container %s because it was not found.", container_id)
+            Logger.log("w", "Could duplicate container %s because it was not found.", container_id)
             return ""
 
         container = containers[0]
@@ -81,7 +87,7 @@ class ContainerManager(QObject):
     def renameContainer(self, container_id, new_id, new_name):
         containers = self._container_registry.findContainers(None, id = container_id)
         if not containers:
-            UM.Logger.log("w", "Could rename container %s because it was not found.", container_id)
+            Logger.log("w", "Could rename container %s because it was not found.", container_id)
             return False
 
         container = containers[0]
@@ -109,7 +115,7 @@ class ContainerManager(QObject):
     def removeContainer(self, container_id):
         containers = self._container_registry.findContainers(None, id = container_id)
         if not containers:
-            UM.Logger.log("w", "Could remove container %s because it was not found.", container_id)
+            Logger.log("w", "Could remove container %s because it was not found.", container_id)
             return False
 
         self._container_registry.removeContainer(containers[0].getId())
@@ -129,20 +135,20 @@ class ContainerManager(QObject):
     def mergeContainers(self, merge_into_id, merge_id):
         containers = self._container_registry.findContainers(None, id = merge_into_id)
         if not containers:
-            UM.Logger.log("w", "Could merge into container %s because it was not found.", merge_into_id)
+            Logger.log("w", "Could merge into container %s because it was not found.", merge_into_id)
             return False
 
         merge_into = containers[0]
 
         containers = self._container_registry.findContainers(None, id = merge_id)
         if not containers:
-            UM.Logger.log("w", "Could not merge container %s because it was not found", merge_id)
+            Logger.log("w", "Could not merge container %s because it was not found", merge_id)
             return False
 
         merge = containers[0]
 
         if not isinstance(merge, type(merge_into)):
-            UM.Logger.log("w", "Cannot merge two containers of different types")
+            Logger.log("w", "Cannot merge two containers of different types")
             return False
 
         self._performMerge(merge_into, merge)
@@ -158,11 +164,11 @@ class ContainerManager(QObject):
     def clearContainer(self, container_id):
         containers = self._container_registry.findContainers(None, id = container_id)
         if not containers:
-            UM.Logger.log("w", "Could clear container %s because it was not found.", container_id)
+            Logger.log("w", "Could clear container %s because it was not found.", container_id)
             return False
 
         if containers[0].isReadOnly():
-            UM.Logger.log("w", "Cannot clear read-only container %s", container_id)
+            Logger.log("w", "Cannot clear read-only container %s", container_id)
             return False
 
         containers[0].clear()
@@ -173,7 +179,7 @@ class ContainerManager(QObject):
     def getContainerMetaDataEntry(self, container_id, entry_name):
         containers = self._container_registry.findContainers(None, id=container_id)
         if not containers:
-            UM.Logger.log("w", "Could not get metadata of container %s because it was not found.", container_id)
+            Logger.log("w", "Could not get metadata of container %s because it was not found.", container_id)
             return ""
 
         result = containers[0].getMetaDataEntry(entry_name)
@@ -198,13 +204,13 @@ class ContainerManager(QObject):
     def setContainerMetaDataEntry(self, container_id, entry_name, entry_value):
         containers = self._container_registry.findContainers(None, id = container_id)
         if not containers:
-            UM.Logger.log("w", "Could not set metadata of container %s because it was not found.", container_id)
+            Logger.log("w", "Could not set metadata of container %s because it was not found.", container_id)
             return False
 
         container = containers[0]
 
         if container.isReadOnly():
-            UM.Logger.log("w", "Cannot set metadata of read-only container %s.", container_id)
+            Logger.log("w", "Cannot set metadata of read-only container %s.", container_id)
             return False
 
         entries = entry_name.split("/")
@@ -232,13 +238,13 @@ class ContainerManager(QObject):
     def setContainerName(self, container_id, new_name):
         containers = self._container_registry.findContainers(None, id = container_id)
         if not containers:
-            UM.Logger.log("w", "Could not set name of container %s because it was not found.", container_id)
+            Logger.log("w", "Could not set name of container %s because it was not found.", container_id)
             return False
 
         container = containers[0]
 
         if container.isReadOnly():
-            UM.Logger.log("w", "Cannot set name of read-only container %s.", container_id)
+            Logger.log("w", "Cannot set name of read-only container %s.", container_id)
             return False
 
         container.setName(new_name)
@@ -262,11 +268,11 @@ class ContainerManager(QObject):
 
     @pyqtSlot(str, result = bool)
     def isContainerUsed(self, container_id):
-        UM.Logger.log("d", "Checking if container %s is currently used", container_id)
+        Logger.log("d", "Checking if container %s is currently used", container_id)
         containers = self._container_registry.findContainerStacks()
         for stack in containers:
             if container_id in [child.getId() for child in stack.getContainers()]:
-                UM.Logger.log("d", "The container is in use by %s", stack.getId())
+                Logger.log("d", "The container is in use by %s", stack.getId())
                 return True
         return False
 
@@ -301,18 +307,20 @@ class ContainerManager(QObject):
     #
     #   \param container_id The ID of the container to export
     #   \param file_type The type of file to save as. Should be in the form of "description (*.extension, *.ext)"
-    #   \param file_url The URL where to save the file.
+    #   \param file_url_or_string The URL where to save the file.
     #
     #   \return A dictionary containing a key "status" with a status code and a key "message" with a message
     #           explaining the status.
     #           The status code can be one of "error", "cancelled", "success"
     @pyqtSlot(str, str, QUrl, result = "QVariantMap")
-    def exportContainer(self, container_id, file_type, file_url):
+    def exportContainer(self, container_id: str, file_type: str, file_url_or_string: Union[QUrl, str]) -> Dict[str, str]:
-        if not container_id or not file_type or not file_url:
+        if not container_id or not file_type or not file_url_or_string:
             return { "status": "error", "message": "Invalid arguments"}
 
-        if isinstance(file_url, QUrl):
+        if isinstance(file_url_or_string, QUrl):
-            file_url = file_url.toLocalFile()
+            file_url = file_url_or_string.toLocalFile()
+        else:
+            file_url = file_url_or_string
 
         if not file_url:
             return { "status": "error", "message": "Invalid path"}
@@ -320,7 +328,7 @@ class ContainerManager(QObject):
         mime_type = None
         if not file_type in self._container_name_filters:
             try:
-                mime_type = UM.MimeTypeDatabase.getMimeTypeForFile(file_url)
+                mime_type = MimeTypeDatabase.getMimeTypeForFile(file_url)
             except MimeTypeNotFoundError:
                 return { "status": "error", "message": "Unknown File Type" }
         else:
@@ -331,7 +339,7 @@ class ContainerManager(QObject):
             return { "status": "error", "message": "Container not found"}
         container = containers[0]
 
-        if UM.Platform.isOSX() and "." in file_url:
+        if Platform.isOSX() and "." in file_url:
             file_url = file_url[:file_url.rfind(".")]
 
         for suffix in mime_type.suffixes:
@@ -340,7 +348,7 @@ class ContainerManager(QObject):
         else:
             file_url += "." + mime_type.preferredSuffix
 
-        if not UM.Platform.isWindows():
+        if not Platform.isWindows():
             if os.path.exists(file_url):
                 result = QMessageBox.question(None, catalog.i18nc("@title:window", "File Already Exists"),
                                               catalog.i18nc("@label", "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?").format(file_url))
@@ -355,7 +363,7 @@ class ContainerManager(QObject):
         if contents is None:
             return {"status": "error", "message": "Serialization returned None. Unable to write to file"}
 
-        with UM.SaveFile(file_url, "w") as f:
+        with SaveFile(file_url, "w") as f:
             f.write(contents)
 
         return { "status": "success", "message": "Succesfully exported container", "path": file_url}
@@ -367,22 +375,24 @@ class ContainerManager(QObject):
     #   \return \type{Dict} dict with a 'status' key containing the string 'success' or 'error', and a 'message' key
     #       containing a message for the user
     @pyqtSlot(QUrl, result = "QVariantMap")
-    def importContainer(self, file_url):
+    def importContainer(self, file_url_or_string: Union[QUrl, str]) -> Dict[str, str]:
-        if not file_url:
+        if not file_url_or_string:
             return { "status": "error", "message": "Invalid path"}
 
-        if isinstance(file_url, QUrl):
+        if isinstance(file_url_or_string, QUrl):
-            file_url = file_url.toLocalFile()
+            file_url = file_url_or_string.toLocalFile()
+        else:
+            file_url = file_url_or_string
 
         if not file_url or not os.path.exists(file_url):
             return { "status": "error", "message": "Invalid path" }
 
         try:
-            mime_type = UM.MimeTypeDatabase.getMimeTypeForFile(file_url)
+            mime_type = MimeTypeDatabase.getMimeTypeForFile(file_url)
         except MimeTypeNotFoundError:
             return { "status": "error", "message": "Could not determine mime type of file" }
 
-        container_type = UM.Settings.ContainerRegistry.getContainerForMimeType(mime_type)
+        container_type = self._container_registry.getContainerForMimeType(mime_type)
         if not container_type:
             return { "status": "error", "message": "Could not find a container to handle the specified file."}
 
@@ -411,17 +421,17 @@ class ContainerManager(QObject):
     #   \return \type{bool} True if successful, False if not.
     @pyqtSlot(result = bool)
     def updateQualityChanges(self):
-        global_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_stack = Application.getInstance().getGlobalContainerStack()
         if not global_stack:
             return False
 
         self._machine_manager.blurSettings.emit()
 
-        for stack in cura.Settings.ExtruderManager.getInstance().getActiveGlobalAndExtruderStacks():
+        for stack in ExtruderManager.getInstance().getActiveGlobalAndExtruderStacks():
             # Find the quality_changes container for this stack and merge the contents of the top container into it.
             quality_changes = stack.findContainer(type = "quality_changes")
             if not quality_changes or quality_changes.isReadOnly():
-                UM.Logger.log("e", "Could not update quality of a nonexistant or read only quality profile in stack %s", stack.getId())
+                Logger.log("e", "Could not update quality of a nonexistant or read only quality profile in stack %s", stack.getId())
                 continue
 
             self._performMerge(quality_changes, stack.getTop())
@@ -432,13 +442,13 @@ class ContainerManager(QObject):
 
     ##  Clear the top-most (user) containers of the active stacks.
     @pyqtSlot()
-    def clearUserContainers(self):
+    def clearUserContainers(self) -> None:
         self._machine_manager.blurSettings.emit()
 
         send_emits_containers = []
 
         # Go through global and extruder stacks and clear their topmost container (the user settings).
-        for stack in cura.Settings.ExtruderManager.getInstance().getActiveGlobalAndExtruderStacks():
+        for stack in ExtruderManager.getInstance().getActiveGlobalAndExtruderStacks():
             container = stack.getTop()
             container.clear()
             send_emits_containers.append(container)
@@ -455,13 +465,13 @@ class ContainerManager(QObject):
     #   \return \type{bool} True if the operation was successfully, False if not.
     @pyqtSlot(str, result = bool)
     def createQualityChanges(self, base_name):
-        global_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_stack = Application.getInstance().getGlobalContainerStack()
         if not global_stack:
             return False
 
         active_quality_name = self._machine_manager.activeQualityName
         if active_quality_name == "":
-            UM.Logger.log("w", "No quality container found in stack %s, cannot create profile", global_stack.getId())
+            Logger.log("w", "No quality container found in stack %s, cannot create profile", global_stack.getId())
             return False
 
         self._machine_manager.blurSettings.emit()
@@ -470,17 +480,17 @@ class ContainerManager(QObject):
         unique_name = self._container_registry.uniqueName(base_name)
 
         # Go through the active stacks and create quality_changes containers from the user containers.
-        for stack in cura.Settings.ExtruderManager.getInstance().getActiveGlobalAndExtruderStacks():
+        for stack in ExtruderManager.getInstance().getActiveGlobalAndExtruderStacks():
             user_container = stack.getTop()
             quality_container = stack.findContainer(type = "quality")
             quality_changes_container = stack.findContainer(type = "quality_changes")
             if not quality_container or not quality_changes_container:
-                UM.Logger.log("w", "No quality or quality changes container found in stack %s, ignoring it", stack.getId())
+                Logger.log("w", "No quality or quality changes container found in stack %s, ignoring it", stack.getId())
                 continue
 
             extruder_id = None if stack is global_stack else QualityManager.getInstance().getParentMachineDefinition(stack.getBottom()).getId()
             new_changes = self._createQualityChanges(quality_container, unique_name,
-                                                     UM.Application.getInstance().getGlobalContainerStack().getBottom(),
+                                                     Application.getInstance().getGlobalContainerStack().getBottom(),
                                                      extruder_id)
             self._performMerge(new_changes, quality_changes_container, clear_settings = False)
             self._performMerge(new_changes, user_container)
@@ -502,7 +512,7 @@ class ContainerManager(QObject):
     #   \return \type{bool} True if successful, False if not.
     @pyqtSlot(str, result = bool)
     def removeQualityChanges(self, quality_name):
-        UM.Logger.log("d", "Attempting to remove the quality change containers with name %s", quality_name)
+        Logger.log("d", "Attempting to remove the quality change containers with name %s", quality_name)
         containers_found = False
 
         if not quality_name:
@@ -512,7 +522,7 @@ class ContainerManager(QObject):
         activate_quality = quality_name == self._machine_manager.activeQualityName
         activate_quality_type = None
 
-        global_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_stack = Application.getInstance().getGlobalContainerStack()
         if not global_stack or not quality_name:
             return ""
         machine_definition = global_stack.getBottom()
@@ -524,7 +534,7 @@ class ContainerManager(QObject):
             self._container_registry.removeContainer(container.getId())
 
         if not containers_found:
-            UM.Logger.log("d", "Unable to remove quality containers, as we did not find any by the name of %s", quality_name)
+            Logger.log("d", "Unable to remove quality containers, as we did not find any by the name of %s", quality_name)
 
         elif activate_quality:
             definition_id = "fdmprinter" if not self._machine_manager.filterQualityByMachine else self._machine_manager.activeDefinitionId
@@ -547,15 +557,15 @@ class ContainerManager(QObject):
     #   \return True if successful, False if not.
     @pyqtSlot(str, str, result = bool)
     def renameQualityChanges(self, quality_name, new_name):
-        UM.Logger.log("d", "User requested QualityChanges container rename of %s to %s", quality_name, new_name)
+        Logger.log("d", "User requested QualityChanges container rename of %s to %s", quality_name, new_name)
         if not quality_name or not new_name:
             return False
 
         if quality_name == new_name:
-            UM.Logger.log("w", "Unable to rename %s to %s, because they are the same.", quality_name, new_name)
+            Logger.log("w", "Unable to rename %s to %s, because they are the same.", quality_name, new_name)
             return True
 
-        global_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_stack = Application.getInstance().getGlobalContainerStack()
         if not global_stack:
             return False
 
@@ -572,7 +582,7 @@ class ContainerManager(QObject):
             container_registry.renameContainer(container.getId(), new_name, self._createUniqueId(stack_id, new_name))
 
         if not containers_to_rename:
-            UM.Logger.log("e", "Unable to rename %s, because we could not find the profile", quality_name)
+            Logger.log("e", "Unable to rename %s, because we could not find the profile", quality_name)
 
         self._machine_manager.activeQualityChanged.emit()
         return True
@@ -588,12 +598,12 @@ class ContainerManager(QObject):
     #   \return A string containing the name of the duplicated containers, or an empty string if it failed.
     @pyqtSlot(str, str, result = str)
     def duplicateQualityOrQualityChanges(self, quality_name, base_name):
-        global_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_stack = Application.getInstance().getGlobalContainerStack()
         if not global_stack or not quality_name:
             return ""
         machine_definition = global_stack.getBottom()
 
-        active_stacks = cura.Settings.ExtruderManager.getInstance().getActiveGlobalAndExtruderStacks()
+        active_stacks = ExtruderManager.getInstance().getActiveGlobalAndExtruderStacks()
         material_containers = [stack.findContainer(type="material") for stack in active_stacks]
 
         result = self._duplicateQualityOrQualityChangesForMachineType(quality_name, base_name,
@@ -609,16 +619,16 @@ class ContainerManager(QObject):
     #   \param material_instances \type{List[InstanceContainer]}
     #   \return \type{str} the name of the newly created container.
     def _duplicateQualityOrQualityChangesForMachineType(self, quality_name, base_name, machine_definition, material_instances):
-        UM.Logger.log("d", "Attempting to duplicate the quality %s", quality_name)
+        Logger.log("d", "Attempting to duplicate the quality %s", quality_name)
 
         if base_name is None:
             base_name = quality_name
         # Try to find a Quality with the name.
         container = QualityManager.getInstance().findQualityByName(quality_name, machine_definition, material_instances)
         if container:
-            UM.Logger.log("d", "We found a quality to duplicate.")
+            Logger.log("d", "We found a quality to duplicate.")
             return self._duplicateQualityForMachineType(container, base_name, machine_definition)
-        UM.Logger.log("d", "We found a quality_changes to duplicate.")
+        Logger.log("d", "We found a quality_changes to duplicate.")
         # Assume it is a quality changes.
         return self._duplicateQualityChangesForMachineType(quality_name, base_name, machine_definition)
 
@@ -662,14 +672,14 @@ class ContainerManager(QObject):
         return new_change_instances
 
     @pyqtSlot(str, result = str)
-    def duplicateMaterial(self, material_id):
+    def duplicateMaterial(self, material_id: str) -> str:
         containers = self._container_registry.findInstanceContainers(id=material_id)
         if not containers:
-            UM.Logger.log("d", "Unable to duplicate the material with id %s, because it doesn't exist.", material_id)
+            Logger.log("d", "Unable to duplicate the material with id %s, because it doesn't exist.", material_id)
             return ""
 
         # Ensure all settings are saved.
-        UM.Application.getInstance().saveSettings()
+        Application.getInstance().saveSettings()
 
         # Create a new ID & container to hold the data.
         new_id = self._container_registry.uniqueName(material_id)
@@ -686,13 +696,13 @@ class ContainerManager(QObject):
 
     ##  Get the singleton instance for this class.
     @classmethod
-    def getInstance(cls):
+    def getInstance(cls) -> "ContainerManager":
         # Note: Explicit use of class name to prevent issues with inheritance.
         if ContainerManager.__instance is None:
             ContainerManager.__instance = cls()
         return ContainerManager.__instance
 
-    __instance = None
+    __instance = None   # type: "ContainerManager"
 
     # Factory function, used by QML
     @staticmethod
@@ -711,16 +721,16 @@ class ContainerManager(QObject):
         if clear_settings:
             merge.clear()
 
-    def _updateContainerNameFilters(self):
+    def _updateContainerNameFilters(self) -> None:
         self._container_name_filters = {}
-        for plugin_id, container_type in UM.Settings.ContainerRegistry.getContainerTypes():
+        for plugin_id, container_type in self._container_registry.getContainerTypes():
             # Ignore default container types since those are not plugins
-            if container_type in (UM.Settings.InstanceContainer, UM.Settings.ContainerStack, UM.Settings.DefinitionContainer):
+            if container_type in (InstanceContainer, ContainerStack, DefinitionContainer):
                 continue
 
             serialize_type = ""
             try:
-                plugin_metadata = UM.PluginRegistry.getInstance().getMetaData(plugin_id)
+                plugin_metadata = PluginRegistry.getInstance().getMetaData(plugin_id)
                 if plugin_metadata:
                     serialize_type = plugin_metadata["settings_container"]["type"]
                 else:
@@ -728,7 +738,7 @@ class ContainerManager(QObject):
             except KeyError as e:
                 continue
 
-            mime_type = UM.Settings.ContainerRegistry.getMimeTypeForContainer(container_type)
+            mime_type = self._container_registry.getMimeTypeForContainer(container_type)
 
             entry = {
                 "type": serialize_type,
@@ -737,7 +747,7 @@ class ContainerManager(QObject):
             }
 
             suffix = mime_type.preferredSuffix
-            if UM.Platform.isOSX() and "." in suffix:
+            if Platform.isOSX() and "." in suffix:
                 # OSX's File dialog is stupid and does not allow selecting files with a . in its name
                 suffix = suffix[suffix.index(".") + 1:]
 
@@ -746,7 +756,7 @@ class ContainerManager(QObject):
                 if suffix == mime_type.preferredSuffix:
                     continue
 
-                if UM.Platform.isOSX() and "." in suffix:
+                if Platform.isOSX() and "." in suffix:
                     # OSX's File dialog is stupid and does not allow selecting files with a . in its name
                     suffix = suffix[suffix.index("."):]
 
@@ -791,7 +801,7 @@ class ContainerManager(QObject):
         base_id = machine_definition.getId() if extruder_id is None else extruder_id
 
         # Create a new quality_changes container for the quality.
-        quality_changes = UM.Settings.InstanceContainer(self._createUniqueId(base_id, new_name))
+        quality_changes = InstanceContainer(self._createUniqueId(base_id, new_name))
         quality_changes.setName(new_name)
         quality_changes.addMetaDataEntry("type", "quality_changes")
         quality_changes.addMetaDataEntry("quality_type", quality_container.getMetaDataEntry("quality_type"))
@@ -826,7 +836,7 @@ class ContainerManager(QObject):
             if not path.endswith(".curaprofile"):
                 continue
 
-            single_result = UM.Settings.ContainerRegistry.getInstance().importProfile(path)
+            single_result = self._container_registry.importProfile(path)
             if single_result["status"] == "error":
                 status = "error"
             results[single_result["status"]].append(single_result["message"])
@@ -843,13 +853,13 @@ class ContainerManager(QObject):
         path = file_url.toLocalFile()
         if not path:
             return
-        return UM.Settings.ContainerRegistry.getInstance().importProfile(path)
+        return self._container_registry.importProfile(path)
 
     @pyqtSlot("QVariantList", QUrl, str)
-    def exportProfile(self, instance_id, file_url, file_type):
+    def exportProfile(self, instance_id: str, file_url: QUrl, file_type: str) -> None:
         if not file_url.isValid():
             return
         path = file_url.toLocalFile()
         if not path:
             return
-        UM.Settings.ContainerRegistry.getInstance().exportProfile(instance_id, path, file_type)
+        self._container_registry.exportProfile(instance_id, path, file_type)

cura/Settings/ExtruderManager.py

@@ -4,13 +4,16 @@
 from PyQt5.QtCore import pyqtSignal, pyqtProperty, QObject, QVariant #For communicating data and events to Qt.
 from UM.FlameProfiler import pyqtSlot
 
-import UM.Application #To get the global container stack to find the current machine.
+from UM.Application import Application #To get the global container stack to find the current machine.
-import UM.Logger
+from UM.Logger import Logger
-from UM.Scene.Iterator.DepthFirstIterator import DepthFirstIterator #To find which extruders are used in the scene.
+from UM.Scene.Iterator.DepthFirstIterator import DepthFirstIterator
-from UM.Scene.SceneNode import SceneNode #To find which extruders are used in the scene.
+from UM.Scene.SceneNode import SceneNode
-import UM.Settings.ContainerRegistry #Finding containers by ID.
+from UM.Settings.ContainerRegistry import ContainerRegistry #Finding containers by ID.
-import UM.Settings.SettingFunction
+from UM.Settings.InstanceContainer import InstanceContainer
-
+from UM.Settings.SettingFunction import SettingFunction
+from UM.Settings.ContainerStack import ContainerStack
+from UM.Settings.DefinitionContainer import DefinitionContainer
+from typing import Optional
 
 ##  Manages all existing extruder stacks.
 #
@@ -31,7 +34,7 @@ class ExtruderManager(QObject):
         super().__init__(parent)
         self._extruder_trains = { } #Per machine, a dictionary of extruder container stack IDs.
         self._active_extruder_index = 0
-        UM.Application.getInstance().globalContainerStackChanged.connect(self.__globalContainerStackChanged)
+        Application.getInstance().globalContainerStackChanged.connect(self.__globalContainerStackChanged)
         self._global_container_stack_definition_id = None
         self._addCurrentMachineExtruders()
 
@@ -42,34 +45,35 @@ class ExtruderManager(QObject):
     #
     #   \return The unique ID of the currently active extruder stack.
     @pyqtProperty(str, notify = activeExtruderChanged)
-    def activeExtruderStackId(self):
+    def activeExtruderStackId(self) -> Optional[str]:
-        if not UM.Application.getInstance().getGlobalContainerStack():
+        if not Application.getInstance().getGlobalContainerStack():
             return None # No active machine, so no active extruder.
         try:
-            return self._extruder_trains[UM.Application.getInstance().getGlobalContainerStack().getId()][str(self._active_extruder_index)].getId()
+            return self._extruder_trains[Application.getInstance().getGlobalContainerStack().getId()][str(self._active_extruder_index)].getId()
         except KeyError: # Extruder index could be -1 if the global tab is selected, or the entry doesn't exist if the machine definition is wrong.
             return None
 
+    ##  Return extruder count according to extruder trains.
     @pyqtProperty(int, notify = extrudersChanged)
     def extruderCount(self):
-        if not UM.Application.getInstance().getGlobalContainerStack():
+        if not Application.getInstance().getGlobalContainerStack():
             return 0  # No active machine, so no extruders.
         try:
-            return len(self._extruder_trains[UM.Application.getInstance().getGlobalContainerStack().getId()])
+            return len(self._extruder_trains[Application.getInstance().getGlobalContainerStack().getId()])
         except KeyError:
             return 0
 
     @pyqtProperty("QVariantMap", notify=extrudersChanged)
     def extruderIds(self):
         map = {}
-        for position in self._extruder_trains[UM.Application.getInstance().getGlobalContainerStack().getId()]:
+        for position in self._extruder_trains[Application.getInstance().getGlobalContainerStack().getId()]:
-            map[position] = self._extruder_trains[UM.Application.getInstance().getGlobalContainerStack().getId()][position].getId()
+            map[position] = self._extruder_trains[Application.getInstance().getGlobalContainerStack().getId()][position].getId()
         return map
 
     @pyqtSlot(str, result = str)
-    def getQualityChangesIdByExtruderStackId(self, id):
+    def getQualityChangesIdByExtruderStackId(self, id: str) -> str:
-        for position in self._extruder_trains[UM.Application.getInstance().getGlobalContainerStack().getId()]:
+        for position in self._extruder_trains[Application.getInstance().getGlobalContainerStack().getId()]:
-            extruder = self._extruder_trains[UM.Application.getInstance().getGlobalContainerStack().getId()][position]
+            extruder = self._extruder_trains[Application.getInstance().getGlobalContainerStack().getId()][position]
             if extruder.getId() == id:
                 return extruder.findContainer(type = "quality_changes").getId()
 
@@ -86,7 +90,7 @@ class ExtruderManager(QObject):
     #
     #   \return The extruder manager.
     @classmethod
-    def getInstance(cls):
+    def getInstance(cls) -> "ExtruderManager":
         if not cls.__instance:
             cls.__instance = ExtruderManager()
         return cls.__instance
@@ -95,16 +99,27 @@ class ExtruderManager(QObject):
     #
     #   \param index The index of the new active extruder.
     @pyqtSlot(int)
-    def setActiveExtruderIndex(self, index):
+    def setActiveExtruderIndex(self, index: int) -> None:
         self._active_extruder_index = index
         self.activeExtruderChanged.emit()
 
     @pyqtProperty(int, notify = activeExtruderChanged)
-    def activeExtruderIndex(self):
+    def activeExtruderIndex(self) -> int:
         return self._active_extruder_index
 
-    def getActiveExtruderStack(self):
+    ##  Gets the extruder name of an extruder of the currently active machine.
-        global_container_stack = UM.Application.getInstance().getGlobalContainerStack()
+    #
+    #   \param index The index of the extruder whose name to get.
+    @pyqtSlot(int, result = str)
+    def getExtruderName(self, index):
+        try:
+            return list(self.getActiveExtruderStacks())[index].getName()
+        except IndexError:
+            return ""
+
+    def getActiveExtruderStack(self) -> ContainerStack:
+        global_container_stack = Application.getInstance().getGlobalContainerStack()
+
         if global_container_stack:
             if global_container_stack.getId() in self._extruder_trains:
                 if str(self._active_extruder_index) in self._extruder_trains[global_container_stack.getId()]:
@@ -113,7 +128,7 @@ class ExtruderManager(QObject):
 
     ##  Get an extruder stack by index
     def getExtruderStack(self, index):
-        global_container_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_container_stack = Application.getInstance().getGlobalContainerStack()
         if global_container_stack:
             if global_container_stack.getId() in self._extruder_trains:
                 if str(index) in self._extruder_trains[global_container_stack.getId()]:
@@ -125,19 +140,19 @@ class ExtruderManager(QObject):
     #
     #   \param machine_definition   The machine definition to add the extruders for.
     #   \param machine_id           The machine_id to add the extruders for.
-    def addMachineExtruders(self, machine_definition, machine_id):
+    def addMachineExtruders(self, machine_definition: DefinitionContainer, machine_id: str) -> None:
         changed = False
         machine_definition_id = machine_definition.getId()
         if machine_id not in self._extruder_trains:
             self._extruder_trains[machine_id] = { }
             changed = True
-        container_registry = UM.Settings.ContainerRegistry.getInstance()
+        container_registry = ContainerRegistry.getInstance()
         if container_registry:
             # Add the extruder trains that don't exist yet.
             for extruder_definition in container_registry.findDefinitionContainers(machine = machine_definition_id):
                 position = extruder_definition.getMetaDataEntry("position", None)
                 if not position:
-                    UM.Logger.log("w", "Extruder definition %s specifies no position metadata entry.", extruder_definition.getId())
+                    Logger.log("w", "Extruder definition %s specifies no position metadata entry.", extruder_definition.getId())
                 if not container_registry.findContainerStacks(machine = machine_id, position = position): # Doesn't exist yet.
                     self.createExtruderTrain(extruder_definition, machine_definition, position, machine_id)
                     changed = True
@@ -148,7 +163,7 @@ class ExtruderManager(QObject):
                 self._extruder_trains[machine_id][extruder_train.getMetaDataEntry("position")] = extruder_train
 
                 # regardless of what the next stack is, we have to set it again, because of signal routing.
-                extruder_train.setNextStack(UM.Application.getInstance().getGlobalContainerStack())
+                extruder_train.setNextStack(Application.getInstance().getGlobalContainerStack())
                 changed = True
         if changed:
             self.extrudersChanged.emit(machine_id)
@@ -177,14 +192,15 @@ class ExtruderManager(QObject):
     #   \param machine_definition   The machine that the extruder train belongs to.
     #   \param position             The position of this extruder train in the extruder slots of the machine.
     #   \param machine_id           The id of the "global" stack this extruder is linked to.
-    def createExtruderTrain(self, extruder_definition, machine_definition, position, machine_id):
+    def createExtruderTrain(self, extruder_definition: DefinitionContainer, machine_definition: DefinitionContainer,
+                            position, machine_id: str) -> None:
         # Cache some things.
-        container_registry = UM.Settings.ContainerRegistry.getInstance()
+        container_registry = ContainerRegistry.getInstance()
-        machine_definition_id = UM.Application.getInstance().getMachineManager().getQualityDefinitionId(machine_definition)
+        machine_definition_id = Application.getInstance().getMachineManager().getQualityDefinitionId(machine_definition)
 
         # Create a container stack for this extruder.
         extruder_stack_id = container_registry.uniqueName(extruder_definition.getId())
-        container_stack = UM.Settings.ContainerStack(extruder_stack_id)
+        container_stack = ContainerStack(extruder_stack_id)
         container_stack.setName(extruder_definition.getName())  # Take over the display name to display the stack with.
         container_stack.addMetaDataEntry("type", "extruder_train")
         container_stack.addMetaDataEntry("machine", machine_id)
@@ -204,7 +220,7 @@ class ExtruderManager(QObject):
                 if len(preferred_variants) >= 1:
                     variant = preferred_variants[0]
                 else:
-                    UM.Logger.log("w", "The preferred variant \"%s\" of machine %s doesn't exist or is not a variant profile.", preferred_variant_id, machine_id)
+                    Logger.log("w", "The preferred variant \"%s\" of machine %s doesn't exist or is not a variant profile.", preferred_variant_id, machine_id)
                     # And leave it at the default variant.
         container_stack.addContainer(variant)
 
@@ -234,7 +250,7 @@ class ExtruderManager(QObject):
                 if len(preferred_materials) >= 1:
                     material = preferred_materials[0]
                 else:
-                    UM.Logger.log("w", "The preferred material \"%s\" of machine %s doesn't exist or is not a material profile.", preferred_material_id, machine_id)
+                    Logger.log("w", "The preferred material \"%s\" of machine %s doesn't exist or is not a material profile.", preferred_material_id, machine_id)
                     # And leave it at the default material.
         container_stack.addContainer(material)
 
@@ -253,11 +269,11 @@ class ExtruderManager(QObject):
         if preferred_quality:
             search_criteria["id"] = preferred_quality
 
-        containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
+        containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
         if not containers and preferred_quality:
-            UM.Logger.log("w", "The preferred quality \"%s\" of machine %s doesn't exist or is not a quality profile.", preferred_quality, machine_id)
+            Logger.log("w", "The preferred quality \"%s\" of machine %s doesn't exist or is not a quality profile.", preferred_quality, machine_id)
             search_criteria.pop("id", None)
-            containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
+            containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
         if containers:
             quality = containers[0]
 
@@ -270,7 +286,7 @@ class ExtruderManager(QObject):
         if user_profile: # There was already a user profile, loaded from settings.
             user_profile = user_profile[0]
         else:
-            user_profile = UM.Settings.InstanceContainer(extruder_stack_id + "_current_settings")  # Add an empty user profile.
+            user_profile = InstanceContainer(extruder_stack_id + "_current_settings")  # Add an empty user profile.
             user_profile.addMetaDataEntry("type", "user")
             user_profile.addMetaDataEntry("extruder", extruder_stack_id)
             user_profile.setDefinition(machine_definition)
@@ -278,7 +294,7 @@ class ExtruderManager(QObject):
         container_stack.addContainer(user_profile)
 
         # regardless of what the next stack is, we have to set it again, because of signal routing.
-        container_stack.setNextStack(UM.Application.getInstance().getGlobalContainerStack())
+        container_stack.setNextStack(Application.getInstance().getGlobalContainerStack())
 
         container_registry.addContainer(container_stack)
 
@@ -291,14 +307,14 @@ class ExtruderManager(QObject):
     #   \param property  \type{str} The property to get.
     #   \return \type{List} the list of results
     def getAllExtruderSettings(self, setting_key, property):
-        global_container_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_container_stack = Application.getInstance().getGlobalContainerStack()
         if global_container_stack.getProperty("machine_extruder_count", "value") <= 1:
             return [global_container_stack.getProperty(setting_key, property)]
 
         result = []
         for index in self.extruderIds:
             extruder_stack_id = self.extruderIds[str(index)]
-            stack = UM.Settings.ContainerRegistry.getInstance().findContainerStacks(id = extruder_stack_id)[0]
+            stack = ContainerRegistry.getInstance().findContainerStacks(id = extruder_stack_id)[0]
             result.append(stack.getProperty(setting_key, property))
         return result
 
@@ -313,8 +329,8 @@ class ExtruderManager(QObject):
     #
     #   \return A list of extruder stacks.
     def getUsedExtruderStacks(self):
-        global_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_stack = Application.getInstance().getGlobalContainerStack()
-        container_registry = UM.Settings.ContainerRegistry.getInstance()
+        container_registry = ContainerRegistry.getInstance()
 
         if global_stack.getProperty("machine_extruder_count", "value") <= 1: #For single extrusion.
             return [global_stack]
@@ -324,7 +340,7 @@ class ExtruderManager(QObject):
         #Get the extruders of all meshes in the scene.
         support_enabled = False
         support_interface_enabled = False
-        scene_root = UM.Application.getInstance().getController().getScene().getRoot()
+        scene_root = Application.getInstance().getController().getScene().getRoot()
         meshes = [node for node in DepthFirstIterator(scene_root) if type(node) is SceneNode and node.isSelectable()] #Only use the nodes that will be printed.
         for mesh in meshes:
             extruder_stack_id = mesh.callDecoration("getActiveExtruder")
@@ -355,7 +371,7 @@ class ExtruderManager(QObject):
         try:
             return [container_registry.findContainerStacks(id = stack_id)[0] for stack_id in used_extruder_stack_ids]
         except IndexError:  # One or more of the extruders was not found.
-            UM.Logger.log("e", "Unable to find one or more of the extruders in %s", used_extruder_stack_ids)
+            Logger.log("e", "Unable to find one or more of the extruders in %s", used_extruder_stack_ids)
             return []
 
     ##  Removes the container stack and user profile for the extruders for a specific machine.
@@ -363,27 +379,26 @@ class ExtruderManager(QObject):
     #   \param machine_id The machine to remove the extruders for.
     def removeMachineExtruders(self, machine_id):
         for extruder in self.getMachineExtruders(machine_id):
-            containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(type = "user", extruder = extruder.getId())
+            containers = ContainerRegistry.getInstance().findInstanceContainers(type = "user", extruder = extruder.getId())
             for container in containers:
-                UM.Settings.ContainerRegistry.getInstance().removeContainer(container.getId())
+                ContainerRegistry.getInstance().removeContainer(container.getId())
-            UM.Settings.ContainerRegistry.getInstance().removeContainer(extruder.getId())
+            ContainerRegistry.getInstance().removeContainer(extruder.getId())
 
     ##  Returns extruders for a specific machine.
     #
     #   \param machine_id The machine to get the extruders of.
     def getMachineExtruders(self, machine_id):
         if machine_id not in self._extruder_trains:
-            UM.Logger.log("w", "Tried to get the extruder trains for machine %s, which doesn't exist.", machine_id)
+            Logger.log("w", "Tried to get the extruder trains for machine %s, which doesn't exist.", machine_id)
-            return
+            return []
-        for name in self._extruder_trains[machine_id]:
+        return [self._extruder_trains[machine_id][name] for name in self._extruder_trains[machine_id]]
-            yield self._extruder_trains[machine_id][name]
 
     ##  Returns a list containing the global stack and active extruder stacks.
     #
     #   The first element is the global container stack, followed by any extruder stacks.
     #   \return \type{List[ContainerStack]}
     def getActiveGlobalAndExtruderStacks(self):
-        global_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_stack = Application.getInstance().getGlobalContainerStack()
         if not global_stack:
             return None
 
@@ -395,7 +410,7 @@ class ExtruderManager(QObject):
     #
     #   \return \type{List[ContainerStack]} a list of
     def getActiveExtruderStacks(self):
-        global_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_stack = Application.getInstance().getGlobalContainerStack()
 
         result = []
         if global_stack:
@@ -403,17 +418,17 @@ class ExtruderManager(QObject):
                 result.append(self._extruder_trains[global_stack.getId()][extruder])
         return result
 
-    def __globalContainerStackChanged(self):
+    def __globalContainerStackChanged(self) -> None:
         self._addCurrentMachineExtruders()
-        global_container_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_container_stack = Application.getInstance().getGlobalContainerStack()
         if global_container_stack and global_container_stack.getBottom() and global_container_stack.getBottom().getId() != self._global_container_stack_definition_id:
             self._global_container_stack_definition_id = global_container_stack.getBottom().getId()
             self.globalContainerStackDefinitionChanged.emit()
         self.activeExtruderChanged.emit()
 
     ##  Adds the extruders of the currently active machine.
-    def _addCurrentMachineExtruders(self):
+    def _addCurrentMachineExtruders(self) -> None:
-        global_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_stack = Application.getInstance().getGlobalContainerStack()
         if global_stack and global_stack.getBottom():
             self.addMachineExtruders(global_stack.getBottom(), global_stack.getId())
 
@@ -427,7 +442,7 @@ class ExtruderManager(QObject):
     #           If no extruder has the value, the list will contain the global value.
     @staticmethod
     def getExtruderValues(key):
-        global_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_stack = Application.getInstance().getGlobalContainerStack()
 
         result = []
         for extruder in ExtruderManager.getInstance().getMachineExtruders(global_stack.getId()):
@@ -436,7 +451,7 @@ class ExtruderManager(QObject):
             if value is None:
                 continue
 
-            if isinstance(value, UM.Settings.SettingFunction):
+            if isinstance(value, SettingFunction):
                 value = value(extruder)
 
             result.append(value)
@@ -472,10 +487,10 @@ class ExtruderManager(QObject):
 
         if extruder:
             value = extruder.getRawProperty(key, "value")
-            if isinstance(value, UM.Settings.SettingFunction):
+            if isinstance(value, SettingFunction):
                 value = value(extruder)
         else: #Just a value from global.
-            value = UM.Application.getInstance().getGlobalContainerStack().getProperty(key, "value")
+            value = Application.getInstance().getGlobalContainerStack().getProperty(key, "value")
 
         return value
 
@@ -488,7 +503,7 @@ class ExtruderManager(QObject):
     #   \return The effective value
     @staticmethod
     def getResolveOrValue(key):
-        global_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_stack = Application.getInstance().getGlobalContainerStack()
 
         resolved_value = global_stack.getProperty(key, "resolve")
         if resolved_value is not None:

cura/Settings/ExtrudersModel.py

@@ -4,8 +4,9 @@
 from PyQt5.QtCore import Qt, pyqtSignal, pyqtProperty
 
 import UM.Qt.ListModel
+from UM.Application import Application
 
-from . import ExtruderManager
+from cura.Settings.ExtruderManager import ExtruderManager
 
 ##  Model that holds extruders.
 #
@@ -55,7 +56,7 @@ class ExtrudersModel(UM.Qt.ListModel.ListModel):
         self._active_extruder_stack = None
 
         #Listen to changes.
-        UM.Application.getInstance().globalContainerStackChanged.connect(self._updateExtruders)
+        Application.getInstance().globalContainerStackChanged.connect(self._updateExtruders)
         manager = ExtruderManager.getInstance()
 
         self._updateExtruders()
@@ -105,8 +106,7 @@ class ExtrudersModel(UM.Qt.ListModel.ListModel):
 
     def _onExtruderStackContainersChanged(self, container):
         # The ExtrudersModel needs to be updated when the material-name or -color changes, because the user identifies extruders by material-name
-        if container.getMetaDataEntry("type") == "material":
+        self._updateExtruders()
-            self._updateExtruders()
 
     modelChanged = pyqtSignal()
 
@@ -121,7 +121,7 @@ class ExtrudersModel(UM.Qt.ListModel.ListModel):
 
         items = []
 
-        global_container_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_container_stack = Application.getInstance().getGlobalContainerStack()
         if global_container_stack:
             if self._add_global:
                 material = global_container_stack.findContainer({ "type": "material" })

cura/Settings/MachineManager.py

@@ -1,5 +1,6 @@
-# Copyright (c) 2016 Ultimaker B.V.
+# Copyright (c) 2017 Ultimaker B.V.
 # Cura is released under the terms of the AGPLv3 or higher.
+from typing import Union
 
 from PyQt5.QtCore import QObject, pyqtProperty, pyqtSignal
 from UM.FlameProfiler import pyqtSlot
@@ -11,11 +12,17 @@ from UM.Preferences import Preferences
 from UM.Logger import Logger
 from UM.Message import Message
 
-import UM.Settings
+from UM.Settings.ContainerRegistry import ContainerRegistry
+from UM.Settings.ContainerStack import ContainerStack
+from UM.Settings.InstanceContainer import InstanceContainer
+from UM.Settings.SettingDefinition import SettingDefinition
+from UM.Settings.SettingFunction import SettingFunction
+from UM.Settings.Validator import ValidatorState
+from UM.Signal import postponeSignals
 
 from cura.QualityManager import QualityManager
 from cura.PrinterOutputDevice import PrinterOutputDevice
-from . import ExtruderManager
+from cura.Settings.ExtruderManager import ExtruderManager
 
 from UM.i18n import i18nCatalog
 catalog = i18nCatalog("cura")
@@ -26,8 +33,8 @@ class MachineManager(QObject):
     def __init__(self, parent = None):
         super().__init__(parent)
 
-        self._active_container_stack = None
+        self._active_container_stack = None     # type: ContainerStack
-        self._global_container_stack = None
+        self._global_container_stack = None     # type: ContainerStack
 
         Application.getInstance().globalContainerStackChanged.connect(self._onGlobalContainerChanged)
         ##  When the global container is changed, active material probably needs to be updated.
@@ -36,10 +43,10 @@ class MachineManager(QObject):
         self.globalContainerChanged.connect(self.activeQualityChanged)
 
         self._stacks_have_errors = None
-        self._empty_variant_container = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(id="empty_variant")[0]
+        self._empty_variant_container = ContainerRegistry.getInstance().findInstanceContainers(id="empty_variant")[0]
-        self._empty_material_container = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(id="empty_material")[0]
+        self._empty_material_container = ContainerRegistry.getInstance().findInstanceContainers(id="empty_material")[0]
-        self._empty_quality_container = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(id="empty_quality")[0]
+        self._empty_quality_container = ContainerRegistry.getInstance().findInstanceContainers(id="empty_quality")[0]
-        self._empty_quality_changes_container = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(id="empty_quality_changes")[0]
+        self._empty_quality_changes_container = ContainerRegistry.getInstance().findInstanceContainers(id="empty_quality_changes")[0]
         self._onGlobalContainerChanged()
 
         ExtruderManager.getInstance().activeExtruderChanged.connect(self._onActiveExtruderStackChanged)
@@ -91,7 +98,7 @@ class MachineManager(QObject):
 
     outputDevicesChanged = pyqtSignal()
 
-    def _onOutputDevicesChanged(self):
+    def _onOutputDevicesChanged(self) -> None:
         for printer_output_device in self._printer_output_devices:
             printer_output_device.hotendIdChanged.disconnect(self._onHotendIdChanged)
             printer_output_device.materialIdChanged.disconnect(self._onMaterialIdChanged)
@@ -112,16 +119,17 @@ class MachineManager(QObject):
 
     @pyqtProperty(int, constant=True)
     def totalNumberOfSettings(self):
-        return len(UM.Settings.ContainerRegistry.getInstance().findDefinitionContainers(id="fdmprinter")[0].getAllKeys())
+        return len(ContainerRegistry.getInstance().findDefinitionContainers(id="fdmprinter")[0].getAllKeys())
 
-    def _onHotendIdChanged(self, index, hotend_id):
+    def _onHotendIdChanged(self, index: Union[str, int], hotend_id: str) -> None:
         if not self._global_container_stack:
             return
 
-        containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(type="variant", definition=self._global_container_stack.getBottom().getId(), name=hotend_id)
+        containers = ContainerRegistry.getInstance().findInstanceContainers(type="variant", definition=self._global_container_stack.getBottom().getId(), name=hotend_id)
         if containers:  # New material ID is known
             extruder_manager = ExtruderManager.getInstance()
-            extruders = list(extruder_manager.getMachineExtruders(self.activeMachineId))
+            machine_id = self.activeMachineId
+            extruders = extruder_manager.getMachineExtruders(machine_id)
             matching_extruder = None
             for extruder in extruders:
                 if str(index) == extruder.getMetaDataEntry("position"):
@@ -142,7 +150,7 @@ class MachineManager(QObject):
         if self._global_container_stack.getMetaDataEntry("has_machine_materials", False):
             definition_id = self.activeQualityDefinitionId
         extruder_manager = ExtruderManager.getInstance()
-        containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(type = "material", definition = definition_id, GUID = material_id)
+        containers = ContainerRegistry.getInstance().findInstanceContainers(type = "material", definition = definition_id, GUID = material_id)
         if containers:  # New material ID is known
             extruders = list(extruder_manager.getMachineExtruders(self.activeMachineId))
             matching_extruder = None
@@ -220,6 +228,11 @@ class MachineManager(QObject):
             quality = self._global_container_stack.findContainer({"type": "quality"})
             quality.nameChanged.disconnect(self._onQualityNameChanged)
 
+            if self._global_container_stack.getProperty("machine_extruder_count", "value") > 1:
+                for extruder_stack in ExtruderManager.getInstance().getActiveExtruderStacks():
+                    extruder_stack.propertyChanged.disconnect(self._onPropertyChanged)
+                    extruder_stack.containersChanged.disconnect(self._onInstanceContainersChanged)
+
         self._global_container_stack = Application.getInstance().getGlobalContainerStack()
         self._active_container_stack = self._global_container_stack
 
@@ -243,6 +256,10 @@ class MachineManager(QObject):
                 if global_material != self._empty_material_container:
                     self._global_container_stack.replaceContainer(self._global_container_stack.getContainerIndex(global_material), self._empty_material_container)
 
+                for extruder_stack in ExtruderManager.getInstance().getActiveExtruderStacks(): #Listen for changes on all extruder stacks.
+                    extruder_stack.propertyChanged.connect(self._onPropertyChanged)
+                    extruder_stack.containersChanged.connect(self._onInstanceContainersChanged)
+
             else:
                 material = self._global_container_stack.findContainer({"type": "material"})
                 material.nameChanged.connect(self._onMaterialNameChanged)
@@ -263,14 +280,8 @@ class MachineManager(QObject):
         self.blurSettings.emit()  # Ensure no-one has focus.
         old_active_container_stack = self._active_container_stack
 
-        if self._active_container_stack and self._active_container_stack != self._global_container_stack:
-            self._active_container_stack.containersChanged.disconnect(self._onInstanceContainersChanged)
-            self._active_container_stack.propertyChanged.disconnect(self._onPropertyChanged)
         self._active_container_stack = ExtruderManager.getInstance().getActiveExtruderStack()
-        if self._active_container_stack:
+        if not self._active_container_stack:
-            self._active_container_stack.containersChanged.connect(self._onInstanceContainersChanged)
-            self._active_container_stack.propertyChanged.connect(self._onPropertyChanged)
-        else:
             self._active_container_stack = self._global_container_stack
 
         self._updateStacksHaveErrors()
@@ -282,13 +293,10 @@ class MachineManager(QObject):
 
     def _onInstanceContainersChanged(self, container):
         container_type = container.getMetaDataEntry("type")
-        
+
-        if container_type == "material":
+        self.activeVariantChanged.emit()
-            self.activeMaterialChanged.emit()
+        self.activeMaterialChanged.emit()
-        elif container_type == "variant":
+        self.activeQualityChanged.emit()
-            self.activeVariantChanged.emit()
-        elif container_type == "quality":
-            self.activeQualityChanged.emit()
 
         self._updateStacksHaveErrors()
 
@@ -297,24 +305,29 @@ class MachineManager(QObject):
             # Notify UI items, such as the "changed" star in profile pull down menu.
             self.activeStackValueChanged.emit()
 
-        if property_name == "validationState":
+        elif property_name == "validationState":
             if not self._stacks_have_errors:
                 # fast update, we only have to look at the current changed property
-                if self._active_container_stack.getProperty(key, "settable_per_extruder"):
+                if self._global_container_stack.getProperty("machine_extruder_count", "value") > 1 and self._active_container_stack.getProperty(key, "settable_per_extruder"):
-                    changed_validation_state = self._active_container_stack.getProperty(key, property_name)
+                    extruder_index = int(self._active_container_stack.getProperty(key, "limit_to_extruder"))
+                    if extruder_index >= 0: #We have to look up the value from a different extruder.
+                        stack = ExtruderManager.getInstance().getExtruderStack(str(extruder_index))
+                    else:
+                        stack = self._active_container_stack
                 else:
-                    changed_validation_state = self._global_container_stack.getProperty(key, property_name)
+                    stack = self._global_container_stack
+                changed_validation_state = stack.getProperty(key, property_name)
 
                 if changed_validation_state is None:
                     # Setting is not validated. This can happen if there is only a setting definition.
                     # We do need to validate it, because a setting defintions value can be set by a function, which could
                     # be an invalid setting.
                     definition = self._active_container_stack.getSettingDefinition(key)
-                    validator_type = UM.Settings.SettingDefinition.getValidatorForType(definition.type)
+                    validator_type = SettingDefinition.getValidatorForType(definition.type)
                     if validator_type:
                         validator = validator_type(key)
                         changed_validation_state = validator(self._active_container_stack)
-                if changed_validation_state in (UM.Settings.ValidatorState.Exception, UM.Settings.ValidatorState.MaximumError, UM.Settings.ValidatorState.MinimumError):
+                if changed_validation_state in (ValidatorState.Exception, ValidatorState.MaximumError, ValidatorState.MinimumError):
                     self._stacks_have_errors = True
                     self.stacksValidationChanged.emit()
             else:
@@ -322,20 +335,20 @@ class MachineManager(QObject):
                 self._updateStacksHaveErrors()
 
     @pyqtSlot(str)
-    def setActiveMachine(self, stack_id):
+    def setActiveMachine(self, stack_id: str) -> None:
         self.blurSettings.emit()  # Ensure no-one has focus.
-        containers = UM.Settings.ContainerRegistry.getInstance().findContainerStacks(id = stack_id)
+        containers = ContainerRegistry.getInstance().findContainerStacks(id = stack_id)
         if containers:
             Application.getInstance().setGlobalContainerStack(containers[0])
 
     @pyqtSlot(str, str)
-    def addMachine(self, name, definition_id):
+    def addMachine(self, name: str, definition_id: str) -> None:
-        container_registry = UM.Settings.ContainerRegistry.getInstance()
+        container_registry = ContainerRegistry.getInstance()
         definitions = container_registry.findDefinitionContainers(id = definition_id)
         if definitions:
             definition = definitions[0]
             name = self._createUniqueName("machine", "", name, definition.getName())
-            new_global_stack = UM.Settings.ContainerStack(name)
+            new_global_stack = ContainerStack(name)
             new_global_stack.addMetaDataEntry("type", "machine")
             container_registry.addContainer(new_global_stack)
 
@@ -343,7 +356,7 @@ class MachineManager(QObject):
             material_instance_container = self._updateMaterialContainer(definition, variant_instance_container)
             quality_instance_container = self._updateQualityContainer(definition, variant_instance_container, material_instance_container)
 
-            current_settings_instance_container = UM.Settings.InstanceContainer(name + "_current_settings")
+            current_settings_instance_container = InstanceContainer(name + "_current_settings")
             current_settings_instance_container.addMetaDataEntry("machine", name)
             current_settings_instance_container.addMetaDataEntry("type", "user")
             current_settings_instance_container.setDefinition(definitions[0])
@@ -371,17 +384,16 @@ class MachineManager(QObject):
     #   \param new_name \type{string} Base name, which may not be unique
     #   \param fallback_name \type{string} Name to use when (stripped) new_name is empty
     #   \return \type{string} Name that is unique for the specified type and name/id
-    def _createUniqueName(self, container_type, current_name, new_name, fallback_name):
+    def _createUniqueName(self, container_type: str, current_name: str, new_name: str, fallback_name: str) -> str:
-        return UM.Settings.ContainerRegistry.getInstance().createUniqueName(container_type, current_name, new_name, fallback_name)
+        return ContainerRegistry.getInstance().createUniqueName(container_type, current_name, new_name, fallback_name)
 
     def _checkStacksHaveErrors(self):
-        if self._global_container_stack is not None and self._global_container_stack.hasErrors():
+        if self._global_container_stack is None: #No active machine.
-            return True
-
-        if self._global_container_stack is None:
             return False
-        stacks = list(ExtruderManager.getInstance().getMachineExtruders(self._global_container_stack.getId()))
+
-        for stack in stacks:
+        if self._global_container_stack.hasErrors():
+            return True
+        for stack in ExtruderManager.getInstance().getMachineExtruders(self._global_container_stack.getId()):
             if stack.hasErrors():
                 return True
 
@@ -463,35 +475,35 @@ class MachineManager(QObject):
         return bool(self._stacks_have_errors)
 
     @pyqtProperty(str, notify = activeStackChanged)
-    def activeUserProfileId(self):
+    def activeUserProfileId(self) -> str:
         if self._active_container_stack:
             return self._active_container_stack.getTop().getId()
 
         return ""
 
     @pyqtProperty(str, notify = globalContainerChanged)
-    def activeMachineName(self):
+    def activeMachineName(self) -> str:
         if self._global_container_stack:
             return self._global_container_stack.getName()
 
         return ""
 
     @pyqtProperty(str, notify = globalContainerChanged)
-    def activeMachineId(self):
+    def activeMachineId(self) -> str:
         if self._global_container_stack:
             return self._global_container_stack.getId()
 
         return ""
 
     @pyqtProperty(str, notify = activeStackChanged)
-    def activeStackId(self):
+    def activeStackId(self) -> str:
         if self._active_container_stack:
             return self._active_container_stack.getId()
 
         return ""
 
     @pyqtProperty(str, notify = activeMaterialChanged)
-    def activeMaterialName(self):
+    def activeMaterialName(self) -> str:
         if self._active_container_stack:
             material = self._active_container_stack.findContainer({"type":"material"})
             if material:
@@ -521,7 +533,7 @@ class MachineManager(QObject):
         return result
 
     @pyqtProperty(str, notify=activeMaterialChanged)
-    def activeMaterialId(self):
+    def activeMaterialId(self) -> str:
         if self._active_container_stack:
             material = self._active_container_stack.findContainer({"type": "material"})
             if material:
@@ -559,13 +571,13 @@ class MachineManager(QObject):
         quality_changes = self._global_container_stack.findContainer({"type": "quality_changes"})
         if quality_changes:
             value = self._global_container_stack.getRawProperty("layer_height", "value", skip_until_container = quality_changes.getId())
-            if isinstance(value, UM.Settings.SettingFunction):
+            if isinstance(value, SettingFunction):
                 value = value(self._global_container_stack)
             return value
         quality = self._global_container_stack.findContainer({"type": "quality"})
         if quality:
             value = self._global_container_stack.getRawProperty("layer_height", "value", skip_until_container = quality.getId())
-            if isinstance(value, UM.Settings.SettingFunction):
+            if isinstance(value, SettingFunction):
                 value = value(self._global_container_stack)
             return value
 
@@ -574,7 +586,7 @@ class MachineManager(QObject):
     ##  Get the Material ID associated with the currently active material
     #   \returns MaterialID (string) if found, empty string otherwise
     @pyqtProperty(str, notify=activeQualityChanged)
-    def activeQualityMaterialId(self):
+    def activeQualityMaterialId(self) -> str:
         if self._active_container_stack:
             quality = self._active_container_stack.findContainer({"type": "quality"})
             if quality:
@@ -664,8 +676,8 @@ class MachineManager(QObject):
 
     ## Check if a container is read_only
     @pyqtSlot(str, result = bool)
-    def isReadOnly(self, container_id):
+    def isReadOnly(self, container_id) -> bool:
-        containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(id = container_id)
+        containers = ContainerRegistry.getInstance().findInstanceContainers(id = container_id)
         if not containers or not self._active_container_stack:
             return True
         return containers[0].isReadOnly()
@@ -687,134 +699,137 @@ class MachineManager(QObject):
     #  Depending on from/to material+current variant, a quality profile is chosen and set.
     @pyqtSlot(str)
     def setActiveMaterial(self, material_id):
-        containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(id = material_id)
+        with postponeSignals(*self._getContainerChangedSignals(), compress = True):
-        if not containers or not self._active_container_stack:
+            containers = ContainerRegistry.getInstance().findInstanceContainers(id = material_id)
-            return
+            if not containers or not self._active_container_stack:
-        material_container = containers[0]
+                return
+            material_container = containers[0]
 
-        Logger.log("d", "Attempting to change the active material to %s", material_id)
+            Logger.log("d", "Attempting to change the active material to %s", material_id)
 
-        old_material = self._active_container_stack.findContainer({"type": "material"})
+            old_material = self._active_container_stack.findContainer({"type": "material"})
-        old_quality = self._active_container_stack.findContainer({"type": "quality"})
+            old_quality = self._active_container_stack.findContainer({"type": "quality"})
-        old_quality_changes = self._active_container_stack.findContainer({"type": "quality_changes"})
+            old_quality_changes = self._active_container_stack.findContainer({"type": "quality_changes"})
-        if not old_material:
+            if not old_material:
-            Logger.log("w", "While trying to set the active material, no material was found to replace it.")
+                Logger.log("w", "While trying to set the active material, no material was found to replace it.")
-            return
+                return
 
-        if old_quality_changes.getId() == "empty_quality_changes":
+            if old_quality_changes.getId() == "empty_quality_changes":
-            old_quality_changes = None
+                old_quality_changes = None
 
-        self.blurSettings.emit()
+            self.blurSettings.emit()
-        old_material.nameChanged.disconnect(self._onMaterialNameChanged)
+            old_material.nameChanged.disconnect(self._onMaterialNameChanged)
 
-        material_index = self._active_container_stack.getContainerIndex(old_material)
+            material_index = self._active_container_stack.getContainerIndex(old_material)
-        self._active_container_stack.replaceContainer(material_index, material_container)
+            self._active_container_stack.replaceContainer(material_index, material_container)
-        Logger.log("d", "Active material changed")
+            Logger.log("d", "Active material changed")
 
-        material_container.nameChanged.connect(self._onMaterialNameChanged)
+            material_container.nameChanged.connect(self._onMaterialNameChanged)
 
-        if material_container.getMetaDataEntry("compatible") == False:
+            if material_container.getMetaDataEntry("compatible") == False:
-            self._material_incompatible_message.show()
+                self._material_incompatible_message.show()
-        else:
+            else:
-            self._material_incompatible_message.hide()
+                self._material_incompatible_message.hide()
 
-        new_quality_id = old_quality.getId()
+            new_quality_id = old_quality.getId()
-        quality_type = old_quality.getMetaDataEntry("quality_type")
+            quality_type = old_quality.getMetaDataEntry("quality_type")
-        if old_quality_changes:
+            if old_quality_changes:
-            quality_type = old_quality_changes.getMetaDataEntry("quality_type")
+                quality_type = old_quality_changes.getMetaDataEntry("quality_type")
-            new_quality_id = old_quality_changes.getId()
+                new_quality_id = old_quality_changes.getId()
 
-        # See if the requested quality type is available in the new situation.
+            # See if the requested quality type is available in the new situation.
-        machine_definition = self._active_container_stack.getBottom()
+            machine_definition = self._active_container_stack.getBottom()
-        quality_manager = QualityManager.getInstance()
+            quality_manager = QualityManager.getInstance()
-        candidate_quality = quality_manager.findQualityByQualityType(quality_type,
+            candidate_quality = quality_manager.findQualityByQualityType(quality_type,
-                                   quality_manager.getWholeMachineDefinition(machine_definition),
+                                    quality_manager.getWholeMachineDefinition(machine_definition),
-                                   [material_container])
+                                    [material_container])
-        if not candidate_quality or candidate_quality.getId() == "empty_quality":
+            if not candidate_quality or candidate_quality.getId() == "empty_quality":
-            # Fall back to a quality
+                # Fall back to a quality
-            new_quality = quality_manager.findQualityByQualityType(None,
+                new_quality = quality_manager.findQualityByQualityType(None,
-                                quality_manager.getWholeMachineDefinition(machine_definition),
+                                    quality_manager.getWholeMachineDefinition(machine_definition),
-                                [material_container])
+                                    [material_container])
-            if new_quality:
+                if new_quality:
-                new_quality_id = new_quality.getId()
+                    new_quality_id = new_quality.getId()
-        else:
+            else:
-            if not old_quality_changes:
+                if not old_quality_changes:
-                new_quality_id = candidate_quality.getId()
+                    new_quality_id = candidate_quality.getId()
 
-        self.setActiveQuality(new_quality_id)
+            self.setActiveQuality(new_quality_id)
 
     @pyqtSlot(str)
     def setActiveVariant(self, variant_id):
-        containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(id = variant_id)
+        with postponeSignals(*self._getContainerChangedSignals(), compress = True):
-        if not containers or not self._active_container_stack:
+            containers = ContainerRegistry.getInstance().findInstanceContainers(id = variant_id)
-            return
+            if not containers or not self._active_container_stack:
-        Logger.log("d", "Attempting to change the active variant to %s", variant_id)
+                return
-        old_variant = self._active_container_stack.findContainer({"type": "variant"})
+            Logger.log("d", "Attempting to change the active variant to %s", variant_id)
-        old_material = self._active_container_stack.findContainer({"type": "material"})
+            old_variant = self._active_container_stack.findContainer({"type": "variant"})
-        if old_variant:
+            old_material = self._active_container_stack.findContainer({"type": "material"})
-            self.blurSettings.emit()
+            if old_variant:
-            variant_index = self._active_container_stack.getContainerIndex(old_variant)
+                self.blurSettings.emit()
-            self._active_container_stack.replaceContainer(variant_index, containers[0])
+                variant_index = self._active_container_stack.getContainerIndex(old_variant)
-            Logger.log("d", "Active variant changed")
+                self._active_container_stack.replaceContainer(variant_index, containers[0])
-            preferred_material = None
+                Logger.log("d", "Active variant changed")
-            if old_material:
+                preferred_material = None
-                preferred_material_name = old_material.getName()
+                if old_material:
+                    preferred_material_name = old_material.getName()
 
-            self.setActiveMaterial(self._updateMaterialContainer(self._global_container_stack.getBottom(), containers[0], preferred_material_name).id)
+                self.setActiveMaterial(self._updateMaterialContainer(self._global_container_stack.getBottom(), containers[0], preferred_material_name).id)
-        else:
+            else:
-            Logger.log("w", "While trying to set the active variant, no variant was found to replace.")
+                Logger.log("w", "While trying to set the active variant, no variant was found to replace.")
 
     ##  set the active quality
     #   \param quality_id The quality_id of either a quality or a quality_changes
     @pyqtSlot(str)
     def setActiveQuality(self, quality_id):
-        self.blurSettings.emit()
+        with postponeSignals(*self._getContainerChangedSignals(), compress = True):
+            self.blurSettings.emit()
 
-        containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(id = quality_id)
+            containers = ContainerRegistry.getInstance().findInstanceContainers(id = quality_id)
-        if not containers or not self._global_container_stack:
+            if not containers or not self._global_container_stack:
-            return
+                return
 
-        Logger.log("d", "Attempting to change the active quality to %s", quality_id)
+            Logger.log("d", "Attempting to change the active quality to %s", quality_id)
 
-        # Quality profile come in two flavours: type=quality and type=quality_changes
+            # Quality profile come in two flavours: type=quality and type=quality_changes
-        # If we found a quality_changes profile then look up its parent quality profile.
+            # If we found a quality_changes profile then look up its parent quality profile.
-        container_type = containers[0].getMetaDataEntry("type")
+            container_type = containers[0].getMetaDataEntry("type")
-        quality_name = containers[0].getName()
+            quality_name = containers[0].getName()
-        quality_type = containers[0].getMetaDataEntry("quality_type")
+            quality_type = containers[0].getMetaDataEntry("quality_type")
 
-        # Get quality container and optionally the quality_changes container.
+            # Get quality container and optionally the quality_changes container.
-        if container_type == "quality":
+            if container_type == "quality":
-            new_quality_settings_list = self.determineQualityAndQualityChangesForQualityType(quality_type)
+                new_quality_settings_list = self.determineQualityAndQualityChangesForQualityType(quality_type)
-        elif container_type == "quality_changes":
+            elif container_type == "quality_changes":
-            new_quality_settings_list = self._determineQualityAndQualityChangesForQualityChanges(quality_name)
+                new_quality_settings_list = self._determineQualityAndQualityChangesForQualityChanges(quality_name)
-        else:
+            else:
-            Logger.log("e", "Tried to set quality to a container that is not of the right type")
+                Logger.log("e", "Tried to set quality to a container that is not of the right type")
-            return
+                return
 
-        name_changed_connect_stacks = []  # Connect these stacks to the name changed callback
+            name_changed_connect_stacks = []  # Connect these stacks to the name changed callback
-        for setting_info in new_quality_settings_list:
+            for setting_info in new_quality_settings_list:
-            stack = setting_info["stack"]
+                stack = setting_info["stack"]
-            stack_quality = setting_info["quality"]
+                stack_quality = setting_info["quality"]
-            stack_quality_changes = setting_info["quality_changes"]
+                stack_quality_changes = setting_info["quality_changes"]
 
-            name_changed_connect_stacks.append(stack_quality)
+                name_changed_connect_stacks.append(stack_quality)
-            name_changed_connect_stacks.append(stack_quality_changes)
+                name_changed_connect_stacks.append(stack_quality_changes)
-            self._replaceQualityOrQualityChangesInStack(stack, stack_quality, postpone_emit = True)
+                self._replaceQualityOrQualityChangesInStack(stack, stack_quality)
-            self._replaceQualityOrQualityChangesInStack(stack, stack_quality_changes, postpone_emit = True)
+                self._replaceQualityOrQualityChangesInStack(stack, stack_quality_changes)
 
-        # Send emits that are postponed in replaceContainer.
+            # Send emits that are postponed in replaceContainer.
-        # Here the stacks are finished replacing and every value can be resolved based on the current state.
+            # Here the stacks are finished replacing and every value can be resolved based on the current state.
-        for setting_info in new_quality_settings_list:
+            for setting_info in new_quality_settings_list:
-            setting_info["stack"].sendPostponedEmits()
+                setting_info["stack"].sendPostponedEmits()
 
-        # Connect to onQualityNameChanged
+            # Connect to onQualityNameChanged
-        for stack in name_changed_connect_stacks:
+            for stack in name_changed_connect_stacks:
-            stack.nameChanged.connect(self._onQualityNameChanged)
+                stack.nameChanged.connect(self._onQualityNameChanged)
 
-        if self.hasUserSettings and Preferences.getInstance().getValue("cura/active_mode") == 1:
+            if self.hasUserSettings and Preferences.getInstance().getValue("cura/active_mode") == 1:
-            self._askUserToKeepOrClearCurrentSettings()
+                self._askUserToKeepOrClearCurrentSettings()
 
-        self.activeQualityChanged.emit()
+            self.activeQualityChanged.emit()
 
     ##  Determine the quality and quality changes settings for the current machine for a quality name.
     #
@@ -924,48 +939,7 @@ class MachineManager(QObject):
         container.nameChanged.connect(self._onQualityNameChanged)
 
     def _askUserToKeepOrClearCurrentSettings(self):
-        # Ask the user if the user profile should be cleared or not (discarding the current settings)
+        Application.getInstance().discardOrKeepProfileChanges()
-        # In Simple Mode we assume the user always wants to keep the (limited) current settings
-        details_text = catalog.i18nc("@label", "You made changes to the following setting(s)/override(s):")
-
-        # user changes in global stack
-        details_list = [setting.definition.label for setting in self._global_container_stack.getTop().findInstances(**{})]
-
-        # user changes in extruder stacks
-        stacks = list(ExtruderManager.getInstance().getMachineExtruders(self._global_container_stack.getId()))
-        for stack in stacks:
-            details_list.extend([
-                "%s (%s)" % (setting.definition.label, stack.getName())
-                for setting in stack.getTop().findInstances(**{})])
-
-        # Format to output string
-        details = "\n    ".join([details_text, ] + details_list)
-
-        num_changed_settings = len(details_list)
-        Application.getInstance().messageBox(
-            catalog.i18nc("@window:title", "Switched profiles"),
-            catalog.i18nc(
-                "@label",
-                "Do you want to transfer your %d changed setting(s)/override(s) to this profile?") % num_changed_settings,
-            catalog.i18nc(
-                "@label",
-                "If you transfer your settings they will override settings in the profile. If you don't transfer these settings, they will be lost."),
-            details,
-            buttons=QMessageBox.Yes + QMessageBox.No,
-            icon=QMessageBox.Question,
-            callback=self._keepUserSettingsDialogCallback)
-
-    def _keepUserSettingsDialogCallback(self, button):
-        if button == QMessageBox.Yes:
-            # Yes, keep the settings in the user profile with this profile
-            pass
-        elif button == QMessageBox.No:
-            # No, discard the settings in the user profile
-            global_stack = Application.getInstance().getGlobalContainerStack()
-            for extruder in ExtruderManager.getInstance().getMachineExtruders(global_stack.getId()):
-                extruder.getTop().clear()
-
-            global_stack.getTop().clear()
 
     @pyqtProperty(str, notify = activeVariantChanged)
     def activeVariantName(self):
@@ -1057,7 +1031,7 @@ class MachineManager(QObject):
 
     @pyqtSlot(str, str)
     def renameMachine(self, machine_id, new_name):
-        containers = UM.Settings.ContainerRegistry.getInstance().findContainerStacks(id = machine_id)
+        containers = ContainerRegistry.getInstance().findContainerStacks(id = machine_id)
         if containers:
             new_name = self._createUniqueName("machine", containers[0].getName(), new_name, containers[0].getBottom().getName())
             containers[0].setName(new_name)
@@ -1070,13 +1044,13 @@ class MachineManager(QObject):
 
         ExtruderManager.getInstance().removeMachineExtruders(machine_id)
 
-        containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(type = "user", machine = machine_id)
+        containers = ContainerRegistry.getInstance().findInstanceContainers(type = "user", machine = machine_id)
         for container in containers:
-            UM.Settings.ContainerRegistry.getInstance().removeContainer(container.getId())
+            ContainerRegistry.getInstance().removeContainer(container.getId())
-        UM.Settings.ContainerRegistry.getInstance().removeContainer(machine_id)
+        ContainerRegistry.getInstance().removeContainer(machine_id)
 
         if activate_new_machine:
-            stacks = UM.Settings.ContainerRegistry.getInstance().findContainerStacks(type = "machine")
+            stacks = ContainerRegistry.getInstance().findContainerStacks(type = "machine")
             if stacks:
                 Application.getInstance().setGlobalContainerStack(stacks[0])
 
@@ -1117,7 +1091,7 @@ class MachineManager(QObject):
     #   \returns DefinitionID (string) if found, None otherwise
     @pyqtSlot(str, result = str)
     def getDefinitionByMachineId(self, machine_id):
-        containers = UM.Settings.ContainerRegistry.getInstance().findContainerStacks(id=machine_id)
+        containers = ContainerRegistry.getInstance().findContainerStacks(id=machine_id)
         if containers:
             return containers[0].getBottom().getId()
 
@@ -1128,13 +1102,13 @@ class MachineManager(QObject):
     def _updateVariantContainer(self, definition):
         if not definition.getMetaDataEntry("has_variants"):
             return self._empty_variant_container
-        machine_definition_id = UM.Application.getInstance().getMachineManager().getQualityDefinitionId(definition)
+        machine_definition_id = Application.getInstance().getMachineManager().getQualityDefinitionId(definition)
         containers = []
         preferred_variant = definition.getMetaDataEntry("preferred_variant")
         if preferred_variant:
-            containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(type = "variant", definition = machine_definition_id, id = preferred_variant)
+            containers = ContainerRegistry.getInstance().findInstanceContainers(type = "variant", definition = machine_definition_id, id = preferred_variant)
         if not containers:
-            containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(type = "variant", definition = machine_definition_id)
+            containers = ContainerRegistry.getInstance().findInstanceContainers(type = "variant", definition = machine_definition_id)
 
         if containers:
             return containers[0]
@@ -1162,23 +1136,23 @@ class MachineManager(QObject):
             if preferred_material:
                 search_criteria["id"] = preferred_material
 
-        containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
+        containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
         if containers:
             return containers[0]
 
-        containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
         if "variant" in search_criteria or "id" in search_criteria:
             # If a material by this name can not be found, try a wider set of search criteria
             search_criteria.pop("variant", None)
             search_criteria.pop("id", None)
-            containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
+
+            containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
             if containers:
                 return containers[0]
         Logger.log("w", "Unable to find a material container with provided criteria, returning an empty one instead.")
         return self._empty_material_container
 
     def _updateQualityContainer(self, definition, variant_container, material_container = None, preferred_quality_name = None):
-        container_registry = UM.Settings.ContainerRegistry.getInstance()
+        container_registry = ContainerRegistry.getInstance()
         search_criteria = { "type": "quality" }
 
         if definition.getMetaDataEntry("has_machine_quality"):
@@ -1261,7 +1235,7 @@ class MachineManager(QObject):
     #   \param preferred_quality_changes_name The name of the quality-changes to
     #   pick, if any such quality-changes profile is available.
     def _updateQualityChangesContainer(self, quality_type, preferred_quality_changes_name = None):
-        container_registry = UM.Settings.ContainerRegistry.getInstance() # Cache.
+        container_registry = ContainerRegistry.getInstance() # Cache.
         search_criteria = { "type": "quality_changes" }
 
         search_criteria["quality"] = quality_type
@@ -1289,3 +1263,8 @@ class MachineManager(QObject):
 
     def _onQualityNameChanged(self):
         self.activeQualityChanged.emit()
+
+    def _getContainerChangedSignals(self):
+        stacks = ExtruderManager.getInstance().getActiveExtruderStacks()
+        stacks.append(self._global_container_stack)
+        return [ s.containersChanged for s in stacks ]

cura/Settings/MachineNameValidator.py

@@ -6,9 +6,9 @@ from PyQt5.QtGui import QValidator
 import os #For statvfs.
 import urllib #To escape machine names for how they're saved to file.
 
-import UM.Resources
+from UM.Resources import Resources
-import UM.Settings.ContainerRegistry
+from UM.Settings.ContainerRegistry import ContainerRegistry
-import UM.Settings.InstanceContainer
+from UM.Settings.InstanceContainer import InstanceContainer
 
 ##  Are machine names valid?
 #
@@ -19,10 +19,10 @@ class MachineNameValidator(QObject):
 
         #Compute the validation regex for printer names. This is limited by the maximum file name length.
         try:
-            filename_max_length = os.statvfs(UM.Resources.getDataStoragePath()).f_namemax
+            filename_max_length = os.statvfs(Resources.getDataStoragePath()).f_namemax
         except AttributeError: #Doesn't support statvfs. Probably because it's not a Unix system.
             filename_max_length = 255 #Assume it's Windows on NTFS.
-        machine_name_max_length = filename_max_length - len("_current_settings.") - len(UM.Settings.ContainerRegistry.getMimeTypeForContainer(UM.Settings.InstanceContainer).preferredSuffix)
+        machine_name_max_length = filename_max_length - len("_current_settings.") - len(ContainerRegistry.getMimeTypeForContainer(InstanceContainer).preferredSuffix)
         # Characters that urllib.parse.quote_plus escapes count for 12! So now
         # we must devise a regex that allows only 12 normal characters or 1
         # special character, and that up to [machine_name_max_length / 12] times.
@@ -41,11 +41,11 @@ class MachineNameValidator(QObject):
     def validate(self, name, position):
         #Check for file name length of the current settings container (which is the longest file we're saving with the name).
         try:
-            filename_max_length = os.statvfs(UM.Resources.getDataStoragePath()).f_namemax
+            filename_max_length = os.statvfs(Resources.getDataStoragePath()).f_namemax
         except AttributeError: #Doesn't support statvfs. Probably because it's not a Unix system.
             filename_max_length = 255 #Assume it's Windows on NTFS.
         escaped_name = urllib.parse.quote_plus(name)
-        current_settings_filename = escaped_name + "_current_settings." + UM.Settings.ContainerRegistry.getMimeTypeForContainer(UM.Settings.InstanceContainer).preferredSuffix
+        current_settings_filename = escaped_name + "_current_settings." + ContainerRegistry.getMimeTypeForContainer(InstanceContainer).preferredSuffix
         if len(current_settings_filename) > filename_max_length:
             return QValidator.Invalid
 

cura/Settings/MaterialSettingsVisibilityHandler.py

@@ -1,19 +1,19 @@
-# Copyright (c) 2016 Ultimaker B.V.
+# Copyright (c) 2017 Ultimaker B.V.
 # Uranium is released under the terms of the AGPLv3 or higher.
 
-import UM.Settings.Models
+import UM.Settings.Models.SettingVisibilityHandler
 
-class MaterialSettingsVisibilityHandler(UM.Settings.Models.SettingVisibilityHandler):
+class MaterialSettingsVisibilityHandler(UM.Settings.Models.SettingVisibilityHandler.SettingVisibilityHandler):
     def __init__(self, parent = None, *args, **kwargs):
         super().__init__(parent = parent, *args, **kwargs)
 
-        material_settings = set([
+        material_settings = {
             "default_material_print_temperature",
             "material_bed_temperature",
             "material_standby_temperature",
             "cool_fan_speed",
             "retraction_amount",
             "retraction_speed",
-        ])
+        }
 
         self.setVisible(material_settings)

cura/Settings/ProfilesModel.py

@@ -38,7 +38,7 @@ class ProfilesModel(InstanceContainersModel):
             ProfilesModel.__instance = cls()
         return ProfilesModel.__instance
 
-    __instance = None
+    __instance = None   # type: "ProfilesModel"
 
     ##  Fetch the list of containers to display.
     #

cura/Settings/QualitySettingsModel.py

@@ -5,15 +5,14 @@ import collections
 
 from PyQt5.QtCore import pyqtProperty, pyqtSignal, Qt
 
-import UM.Application
 import UM.Logger
 import UM.Qt
-import UM.Settings
+from UM.Application import Application
-from UM.i18n import i18nCatalog
 from UM.Settings.ContainerRegistry import ContainerRegistry
-
 import os
 
+from UM.i18n import i18nCatalog
+
 
 class QualitySettingsModel(UM.Qt.ListModel.ListModel):
     KeyRole = Qt.UserRole + 1
@@ -27,7 +26,7 @@ class QualitySettingsModel(UM.Qt.ListModel.ListModel):
     def __init__(self, parent = None):
         super().__init__(parent = parent)
 
-        self._container_registry = UM.Settings.ContainerRegistry.getInstance()
+        self._container_registry = ContainerRegistry.getInstance()
 
         self._extruder_id = None
         self._extruder_definition_id = None
@@ -94,7 +93,7 @@ class QualitySettingsModel(UM.Qt.ListModel.ListModel):
         items = []
 
         settings = collections.OrderedDict()
-        definition_container = UM.Application.getInstance().getGlobalContainerStack().getBottom()
+        definition_container = Application.getInstance().getGlobalContainerStack().getBottom()
 
         containers = self._container_registry.findInstanceContainers(id = self._quality_id)
         if not containers:
@@ -122,7 +121,7 @@ class QualitySettingsModel(UM.Qt.ListModel.ListModel):
             quality_container = quality_container[0]
 
         quality_type = quality_container.getMetaDataEntry("quality_type")
-        definition_id = UM.Application.getInstance().getMachineManager().getQualityDefinitionId(quality_container.getDefinition())
+        definition_id = Application.getInstance().getMachineManager().getQualityDefinitionId(quality_container.getDefinition())
         definition = quality_container.getDefinition()
 
         # Check if the definition container has a translation file.
@@ -169,7 +168,7 @@ class QualitySettingsModel(UM.Qt.ListModel.ListModel):
             if self._extruder_definition_id != "":
                 extruder_definitions = self._container_registry.findDefinitionContainers(id = self._extruder_definition_id)
                 if extruder_definitions:
-                    criteria["extruder"] = UM.Application.getInstance().getMachineManager().getQualityDefinitionId(extruder_definitions[0])
+                    criteria["extruder"] = Application.getInstance().getMachineManager().getQualityDefinitionId(extruder_definitions[0])
                     criteria["name"] = quality_changes_container.getName()
             else:
                 criteria["extruder"] = None
@@ -178,7 +177,7 @@ class QualitySettingsModel(UM.Qt.ListModel.ListModel):
             if changes:
                 containers.extend(changes)
 
-        global_container_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_container_stack = Application.getInstance().getGlobalContainerStack()
         is_multi_extrusion = global_container_stack.getProperty("machine_extruder_count", "value") > 1
 
         current_category = ""

cura/Settings/SettingInheritanceManager.py

@@ -3,9 +3,7 @@
 
 from PyQt5.QtCore import QObject, pyqtProperty, pyqtSignal
 from UM.FlameProfiler import pyqtSlot
-import UM.Settings
 from UM.Application import Application
-import cura.Settings
 from UM.Logger import Logger
 
 
@@ -14,6 +12,12 @@ from UM.Logger import Logger
 #     because some profiles tend to have 'hardcoded' values that break our inheritance. A good example of that are the
 #     speed settings. If all the children of print_speed have a single value override, changing the speed won't
 #     actually do anything, as only the 'leaf' settings are used by the engine.
+from UM.Settings.ContainerStack import ContainerStack
+from UM.Settings.SettingFunction import SettingFunction
+from UM.Settings.SettingInstance import InstanceState
+
+from cura.Settings.ExtruderManager import ExtruderManager
+
 class SettingInheritanceManager(QObject):
     def __init__(self, parent = None):
         super().__init__(parent)
@@ -23,7 +27,7 @@ class SettingInheritanceManager(QObject):
         self._active_container_stack = None
         self._onGlobalContainerChanged()
 
-        cura.Settings.ExtruderManager.getInstance().activeExtruderChanged.connect(self._onActiveExtruderChanged)
+        ExtruderManager.getInstance().activeExtruderChanged.connect(self._onActiveExtruderChanged)
         self._onActiveExtruderChanged()
 
     settingsWithIntheritanceChanged = pyqtSignal()
@@ -46,7 +50,7 @@ class SettingInheritanceManager(QObject):
         multi_extrusion = self._global_container_stack.getProperty("machine_extruder_count", "value") > 1
         if not multi_extrusion:
             return self._settings_with_inheritance_warning
-        extruder = cura.Settings.ExtruderManager.getInstance().getExtruderStack(extruder_index)
+        extruder = ExtruderManager.getInstance().getExtruderStack(extruder_index)
         if not extruder:
             Logger.log("w", "Unable to find extruder for current machine with index %s", extruder_index)
             return []
@@ -73,7 +77,7 @@ class SettingInheritanceManager(QObject):
         self._update()
 
     def _onActiveExtruderChanged(self):
-        new_active_stack = cura.Settings.ExtruderManager.getInstance().getActiveExtruderStack()
+        new_active_stack = ExtruderManager.getInstance().getActiveExtruderStack()
         if not new_active_stack:
             new_active_stack = self._global_container_stack
 
@@ -139,14 +143,14 @@ class SettingInheritanceManager(QObject):
         return self._settings_with_inheritance_warning
 
     ##  Check if a setting has an inheritance function that is overwritten
-    def _settingIsOverwritingInheritance(self, key, stack = None):
+    def _settingIsOverwritingInheritance(self, key: str, stack: ContainerStack = None) -> bool:
         has_setting_function = False
         if not stack:
             stack = self._active_container_stack
         containers = []
 
         ## Check if the setting has a user state. If not, it is never overwritten.
-        has_user_state = stack.getProperty(key, "state") == UM.Settings.InstanceState.User
+        has_user_state = stack.getProperty(key, "state") == InstanceState.User
         if not has_user_state:
             return False
 
@@ -155,7 +159,7 @@ class SettingInheritanceManager(QObject):
             return False
 
         ## Also check if the top container is not a setting function (this happens if the inheritance is restored).
-        if isinstance(stack.getTop().getProperty(key, "value"), UM.Settings.SettingFunction):
+        if isinstance(stack.getTop().getProperty(key, "value"), SettingFunction):
             return False
 
         ##  Mash all containers for all the stacks together.
@@ -170,7 +174,7 @@ class SettingInheritanceManager(QObject):
                 continue
             if value is not None:
                 # If a setting doesn't use any keys, it won't change it's value, so treat it as if it's a fixed value
-                has_setting_function = isinstance(value, UM.Settings.SettingFunction)
+                has_setting_function = isinstance(value, SettingFunction)
                 if has_setting_function:
                     for setting_key in value.getUsedSettingKeys():
                         if setting_key in self._active_container_stack.getAllKeys():

cura/Settings/SettingOverrideDecorator.py

@@ -8,12 +8,12 @@ from UM.Signal import Signal, signalemitter
 from UM.Settings.ContainerStack import ContainerStack
 from UM.Settings.InstanceContainer import InstanceContainer
 from UM.Settings.ContainerRegistry import ContainerRegistry
-import UM.Logger
+from UM.Logger import Logger
-
-import cura.Settings
 
 from UM.Application import Application
 
+from cura.Settings.ExtruderManager import ExtruderManager
+
 ##  A decorator that adds a container stack to a Node. This stack should be queried for all settings regarding
 #   the linked node. The Stack in question will refer to the global stack (so that settings that are not defined by
 #   this stack still resolve.
@@ -29,8 +29,8 @@ class SettingOverrideDecorator(SceneNodeDecorator):
         self._instance = InstanceContainer(container_id = "SettingOverrideInstanceContainer")
         self._stack.addContainer(self._instance)
 
-        if cura.Settings.ExtruderManager.getInstance().extruderCount > 1:
+        if ExtruderManager.getInstance().extruderCount > 1:
-            self._extruder_stack = cura.Settings.ExtruderManager.getInstance().getExtruderStack(0).getId()
+            self._extruder_stack = ExtruderManager.getInstance().getExtruderStack(0).getId()
         else:
             self._extruder_stack = None
 
@@ -77,8 +77,10 @@ class SettingOverrideDecorator(SceneNodeDecorator):
             return container_stack.getMetaDataEntry("position", default=None)
 
     def _onSettingChanged(self, instance, property_name): # Reminder: 'property' is a built-in function
-        if property_name == "value":  # Only reslice if the value has changed.
+        # Trigger slice/need slicing if the value has changed.
-            Application.getInstance().getBackend().forceSlice()
+        if property_name == "value":
+            Application.getInstance().getBackend().needsSlicing()
+            Application.getInstance().getBackend().tickle()
 
     ##  Makes sure that the stack upon which the container stack is placed is
     #   kept up to date.
@@ -92,10 +94,12 @@ class SettingOverrideDecorator(SceneNodeDecorator):
                     old_extruder_stack_id = ""
 
                 self._stack.setNextStack(extruder_stack[0])
-                if self._stack.getNextStack().getId() != old_extruder_stack_id: #Only reslice if the extruder changed.
+                # Trigger slice/need slicing if the extruder changed.
-                    Application.getInstance().getBackend().forceSlice()
+                if self._stack.getNextStack().getId() != old_extruder_stack_id:
+                    Application.getInstance().getBackend().needsSlicing()
+                    Application.getInstance().getBackend().tickle()
             else:
-                UM.Logger.log("e", "Extruder stack %s below per-object settings does not exist.", self._extruder_stack)
+                Logger.log("e", "Extruder stack %s below per-object settings does not exist.", self._extruder_stack)
         else:
             self._stack.setNextStack(Application.getInstance().getGlobalContainerStack())
 

cura/Settings/UserChangesModel.py

@@ -0,0 +1,112 @@
+from UM.Qt.ListModel import ListModel
+
+from PyQt5.QtCore import pyqtSlot, Qt
+from UM.Application import Application
+from cura.Settings.ExtruderManager import ExtruderManager
+from UM.Settings.ContainerRegistry import ContainerRegistry
+from UM.i18n import i18nCatalog
+from UM.Settings.SettingFunction import SettingFunction
+
+import os
+
+class UserChangesModel(ListModel):
+    KeyRole = Qt.UserRole + 1
+    LabelRole = Qt.UserRole + 2
+    ExtruderRole = Qt.UserRole +3
+    OriginalValueRole = Qt.UserRole + 4
+    UserValueRole = Qt.UserRole + 6
+    CategoryRole = Qt.UserRole + 7
+
+    def __init__(self, parent = None):
+        super().__init__(parent = parent)
+        self.addRoleName(self.KeyRole, "key")
+        self.addRoleName(self.LabelRole, "label")
+        self.addRoleName(self.ExtruderRole, "extruder")
+        self.addRoleName(self.OriginalValueRole, "original_value")
+        self.addRoleName(self.UserValueRole, "user_value")
+        self.addRoleName(self.CategoryRole, "category")
+
+        self._i18n_catalog = None
+
+        self._update()
+
+    @pyqtSlot()
+    def forceUpdate(self):
+        self._update()
+
+    def _update(self):
+        items = []
+        global_stack = Application.getInstance().getGlobalContainerStack()
+        stacks = ExtruderManager.getInstance().getActiveGlobalAndExtruderStacks()
+
+        # Check if the definition container has a translation file and ensure it's loaded.
+        definition = global_stack.getBottom()
+
+        definition_suffix = ContainerRegistry.getMimeTypeForContainer(type(definition)).preferredSuffix
+        catalog = i18nCatalog(os.path.basename(definition.getId() + "." + definition_suffix))
+
+        if catalog.hasTranslationLoaded():
+            self._i18n_catalog = catalog
+
+        for file_name in definition.getInheritedFiles():
+            catalog = i18nCatalog(os.path.basename(file_name))
+            if catalog.hasTranslationLoaded():
+                self._i18n_catalog = catalog
+
+        for stack in stacks:
+            # Make a list of all containers in the stack.
+            containers = []
+            latest_stack = stack
+            while latest_stack:
+                containers.extend(latest_stack.getContainers())
+                latest_stack = latest_stack.getNextStack()
+
+            # Drop the user container.
+            user_changes = containers.pop(0)
+
+            for setting_key in user_changes.getAllKeys():
+                original_value = None
+
+                # Find the category of the instance by moving up until we find a category.
+                category = user_changes.getInstance(setting_key).definition
+                while category.type != "category":
+                    category = category.parent
+
+                # Handle translation (and fallback if we weren't able to find any translation files.
+                if self._i18n_catalog:
+                    category_label = self._i18n_catalog.i18nc(category.key + " label", category.label)
+                else:
+                    category_label = category.label
+
+                if self._i18n_catalog:
+                    label = self._i18n_catalog.i18nc(setting_key + " label", stack.getProperty(setting_key, "label"))
+                else:
+                    label = stack.getProperty(setting_key, "label")
+
+                for container in containers:
+                    if stack == global_stack:
+                        resolve = global_stack.getProperty(setting_key, "resolve")
+                        if resolve is not None:
+                            original_value = resolve
+                            break
+
+                    original_value = container.getProperty(setting_key, "value")
+                    if original_value is not None:
+                        break
+
+                    # If a value is a function, ensure it's called with the stack it's in.
+                    if isinstance(original_value, SettingFunction):
+                        original_value = original_value(stack)
+
+                item_to_add = {"key": setting_key,
+                               "label": label,
+                               "user_value": str(user_changes.getProperty(setting_key, "value")),
+                               "original_value": str(original_value),
+                               "extruder": "",
+                               "category": category_label}
+
+                if stack != global_stack:
+                    item_to_add["extruder"] = stack.getName()
+
+                items.append(item_to_add)
+        self.setItems(items)

cura/Settings/__init__.py

@@ -1,18 +1,2 @@
 # Copyright (c) 2016 Ultimaker B.V.
 # Cura is released under the terms of the AGPLv3 or higher.
-
-from .MaterialSettingsVisibilityHandler import MaterialSettingsVisibilityHandler
-from .ContainerManager import ContainerManager
-from .ContainerSettingsModel import ContainerSettingsModel
-from .CuraContainerRegistry import CuraContainerRegistry
-from .ExtruderManager import ExtruderManager
-from .ExtrudersModel import ExtrudersModel
-from .MachineManager import MachineManager
-from .MachineNameValidator import MachineNameValidator
-from .MaterialSettingsVisibilityHandler import MaterialSettingsVisibilityHandler
-from .SettingOverrideDecorator import SettingOverrideDecorator
-from .QualitySettingsModel import QualitySettingsModel
-from .SettingInheritanceManager import SettingInheritanceManager
-from .ProfilesModel import ProfilesModel
-from .QualityAndUserProfilesModel import QualityAndUserProfilesModel
-from .UserProfilesModel import UserProfilesModel

cura_app.py

@@ -2,7 +2,6 @@
 
 # Copyright (c) 2015 Ultimaker B.V.
 # Cura is released under the terms of the AGPLv3 or higher.
-
 import os
 import sys
 import platform
@@ -18,6 +17,12 @@ if Platform.isLinux(): # Needed for platform.linux_distribution, which is not av
         libGL = find_library("GL")
         ctypes.CDLL(libGL, ctypes.RTLD_GLOBAL)
 
+# When frozen, i.e. installer version, don't let PYTHONPATH mess up the search path for DLLs.
+if Platform.isWindows() and hasattr(sys, "frozen"):
+    try:
+        del os.environ["PYTHONPATH"]
+    except KeyError: pass
+
 #WORKAROUND: GITHUB-704 GITHUB-708
 # It looks like setuptools creates a .pth file in
 # the default /usr/lib which causes the default site-packages
@@ -56,7 +61,11 @@ if Platform.isWindows() and hasattr(sys, "frozen"):
     sys.stderr = open(os.path.join(dirpath, "stderr.log"), "w")
 
 # Force an instance of CuraContainerRegistry to be created and reused later.
-cura.Settings.CuraContainerRegistry.getInstance()
+cura.Settings.CuraContainerRegistry.CuraContainerRegistry.getInstance()
+
+# This prestart up check is needed to determine if we should start the application at all.
+if not cura.CuraApplication.CuraApplication.preStartUp():
+    sys.exit(0)
 
 app = cura.CuraApplication.CuraApplication.getInstance()
 app.run()

plugins/3MFReader/ThreeMFReader.py

@@ -11,15 +11,16 @@ from UM.Math.Vector import Vector
 from UM.Mesh.MeshBuilder import MeshBuilder
 from UM.Mesh.MeshReader import MeshReader
 from UM.Scene.GroupDecorator import GroupDecorator
-import UM.Application
 from cura.Settings.SettingOverrideDecorator import SettingOverrideDecorator
 from UM.Application import Application
 from cura.Settings.ExtruderManager import ExtruderManager
 from cura.QualityManager import QualityManager
 from UM.Scene.SceneNode import SceneNode
 
+MYPY = False
 try:
-    import xml.etree.cElementTree as ET
+    if not MYPY:
+        import xml.etree.cElementTree as ET
 except ImportError:
     Logger.log("w", "Unable to load cElementTree, switching to slower version")
     import xml.etree.ElementTree as ET
@@ -201,7 +202,7 @@ class ThreeMFReader(MeshReader):
 
                 build_item_node.setTransformation(transform_matrix)
 
-                global_container_stack = UM.Application.getInstance().getGlobalContainerStack()
+                global_container_stack = Application.getInstance().getGlobalContainerStack()
 
                 # Create a transformation Matrix to convert from 3mf worldspace into ours.
                 # First step: flip the y and z axis.

plugins/3MFReader/ThreeMFWorkspaceReader.py

@@ -182,7 +182,7 @@ class ThreeMFWorkspaceReader(WorkspaceReader):
         self._dialog.setMachineType(machine_type)
         self._dialog.setExtruders(extruders)
         self._dialog.setVariantType(variant_type_name)
-        self._dialog.setHasObjectsOnPlate(Application.getInstance().getPlatformActivity)
+        self._dialog.setHasObjectsOnPlate(Application.getInstance().platformActivity)
         self._dialog.show()
 
         # Block until the dialog is closed.

plugins/3MFReader/__init__.py

@@ -1,16 +1,16 @@
 # Copyright (c) 2015 Ultimaker B.V.
 # Cura is released under the terms of the AGPLv3 or higher.
+from typing import Dict
 
 from . import ThreeMFReader
 from . import ThreeMFWorkspaceReader
 from UM.i18n import i18nCatalog
-import UM.Platform
+from UM.Platform import Platform
 catalog = i18nCatalog("cura")
 
-
+def getMetaData() -> Dict:
-def getMetaData():
     # Workarround for osx not supporting double file extensions correclty.
-    if UM.Platform.isOSX():
+    if Platform.isOSX():
         workspace_extension = "3mf"
     else:
         workspace_extension = "curaproject.3mf"

plugins/3MFWriter/ThreeMFWriter.py

@@ -7,8 +7,10 @@ from UM.Logger import Logger
 from UM.Math.Matrix import Matrix
 from UM.Application import Application
 
+MYPY = False
 try:
-    import xml.etree.cElementTree as ET
+    if not MYPY:
+        import xml.etree.cElementTree as ET
 except ImportError:
     Logger.log("w", "Unable to load cElementTree, switching to slower version")
     import xml.etree.ElementTree as ET
@@ -175,7 +177,7 @@ class ThreeMFWriter(MeshWriter):
             transformation_matrix._data[2, 1] = 1
             transformation_matrix._data[2, 2] = 0
 
-            global_container_stack = UM.Application.getInstance().getGlobalContainerStack()
+            global_container_stack = Application.getInstance().getGlobalContainerStack()
             # Second step: 3MF defines the left corner of the machine as center, whereas cura uses the center of the
             # build volume.
             if global_container_stack:

plugins/ChangeLogPlugin/ChangeLog.txt

@@ -1,3 +1,6 @@
+[2.5.0]
+*Included PauseBackendPlugin. This enables pausing the backend and manually start the backend. Thanks to community member Aldo Hoeben for this feature. 
+
 [2.4.0]
 *Project saving & opening
 You can now save your build plate configuration - with all your active machine’s meshes and settings. When you reopen the project file, you’ll find that the build plate configuration and all settings will be exactly as you last left them when you saved the project.
@@ -24,7 +27,7 @@ When slicing is blocked by settings with error values, a message now appears, cl
 The initial and final printing temperatures reduce the amount of oozing during PLA-PLA, PLA-PVA and Nylon-PVA prints. This means printing a prime tower is now optional (except for CPE and ABS at the moment). The new Ultimaker 3 printing profiles ensure increased reliability and shorter print time.
 
 *Initial Layer Printing Temperature
-Initial and final printing temperature settings have been tuned for higher quality results.
+Initial and final printing temperature settings have been tuned for higher quality results. For all materials the initial print temperature is 5 degrees above the default value.
 
 *Printing temperature of the materials
 The printing temperature of the materials in the material profiles is now the same as the printing temperature for the Normal Quality profile.

plugins/CuraEngineBackend/CuraEngineBackend.py

@@ -13,14 +13,11 @@ from UM.Resources import Resources
 from UM.Settings.Validator import ValidatorState #To find if a setting is in an error state. We can't slice then.
 from UM.Platform import Platform
 from UM.Scene.Iterator.DepthFirstIterator import DepthFirstIterator
+from PyQt5.QtCore import QObject, pyqtSlot
 
 
-import cura.Settings
-
-from cura.OneAtATimeIterator import OneAtATimeIterator
 from cura.Settings.ExtruderManager import ExtruderManager
 from . import ProcessSlicedLayersJob
-from . import ProcessGCodeJob
 from . import StartSliceJob
 
 import os
@@ -34,13 +31,14 @@ import Arcus
 from UM.i18n import i18nCatalog
 catalog = i18nCatalog("cura")
 
-class CuraEngineBackend(Backend):
+class CuraEngineBackend(QObject, Backend):
     ##  Starts the back-end plug-in.
     #
     #   This registers all the signal listeners and prepares for communication
     #   with the back-end in general.
-    def __init__(self):
+    #   CuraEngineBackend is exposed to qml as well.
-        super().__init__()
+    def __init__(self, parent = None):
+        super().__init__(parent = parent)
         # Find out where the engine is located, and how it is called.
         # This depends on how Cura is packaged and which OS we are running on.
         executable_name = "CuraEngine"
@@ -68,11 +66,6 @@ class CuraEngineBackend(Backend):
         default_engine_location = os.path.abspath(default_engine_location)
         Preferences.getInstance().addPreference("backend/location", default_engine_location)
 
-        self._scene = Application.getInstance().getController().getScene()
-        self._scene.sceneChanged.connect(self._onSceneChanged)
-
-        self._pause_slicing = False
-
         # Workaround to disable layer view processing if layer view is not active.
         self._layer_view_active = False
         Application.getInstance().getController().activeViewChanged.connect(self._onActiveViewChanged)
@@ -80,23 +73,18 @@ class CuraEngineBackend(Backend):
         self._stored_layer_data = []
         self._stored_optimized_layer_data = []
 
+        self._scene = Application.getInstance().getController().getScene()
+        self._scene.sceneChanged.connect(self._onSceneChanged)
+
         # Triggers for when to (re)start slicing:
         self._global_container_stack = None
         Application.getInstance().globalContainerStackChanged.connect(self._onGlobalStackChanged)
         self._onGlobalStackChanged()
 
         self._active_extruder_stack = None
-        cura.Settings.ExtruderManager.getInstance().activeExtruderChanged.connect(self._onActiveExtruderChanged)
+        ExtruderManager.getInstance().activeExtruderChanged.connect(self._onActiveExtruderChanged)
         self._onActiveExtruderChanged()
 
-        # When you update a setting and other settings get changed through inheritance, many propertyChanged signals are fired.
-        # This timer will group them up, and only slice for the last setting changed signal.
-        # TODO: Properly group propertyChanged signals by whether they are triggered by the same user interaction.
-        self._change_timer = QTimer()
-        self._change_timer.setInterval(500)
-        self._change_timer.setSingleShot(True)
-        self._change_timer.timeout.connect(self.slice)
-
         # Listeners for receiving messages from the back-end.
         self._message_handlers["cura.proto.Layer"] = self._onLayerMessage
         self._message_handlers["cura.proto.LayerOptimized"] = self._onOptimizedLayerMessage
@@ -109,12 +97,16 @@ class CuraEngineBackend(Backend):
         self._start_slice_job = None
         self._slicing = False  # Are we currently slicing?
         self._restart = False  # Back-end is currently restarting?
-        self._enabled = True  # Should we be slicing? Slicing might be paused when, for instance, the user is dragging the mesh around.
+        self._tool_active = False  # If a tool is active, some tasks do not have to do anything
         self._always_restart = True  # Always restart the engine when starting a new slice. Don't keep the process running. TODO: Fix engine statelessness.
         self._process_layers_job = None  # The currently active job to process layers, or None if it is not processing layers.
+        self._need_slicing = False
+        self._engine_is_fresh = True  # Is the newly started engine used before or not?
 
         self._backend_log_max_lines = 20000  # Maximum number of lines to buffer
         self._error_message = None  # Pop-up message that shows errors.
+        self._last_num_objects = 0  # Count number of objects to see if there is something changed
+        self._postponed_scene_change_sources = []  # scene change is postponed (by a tool)
 
         self.backendQuit.connect(self._onBackendQuit)
         self.backendConnected.connect(self._onBackendConnected)
@@ -125,9 +117,22 @@ class CuraEngineBackend(Backend):
 
         self._slice_start_time = None
 
-    ##  Called when closing the application.
+        Preferences.getInstance().addPreference("general/auto_slice", True)
+
+        self._use_timer = False
+        # When you update a setting and other settings get changed through inheritance, many propertyChanged signals are fired.
+        # This timer will group them up, and only slice for the last setting changed signal.
+        # TODO: Properly group propertyChanged signals by whether they are triggered by the same user interaction.
+        self._change_timer = QTimer()
+        self._change_timer.setSingleShot(True)
+        self._change_timer.setInterval(500)
+        self.determineAutoSlicing()
+        Preferences.getInstance().preferenceChanged.connect(self._onPreferencesChanged)
+
+    ##  Terminate the engine process.
     #
     #   This function should terminate the engine process.
+    #   Called when closing the application.
     def close(self):
         # Terminate CuraEngine if it is still running at this point
         self._terminate()
@@ -151,24 +156,12 @@ class CuraEngineBackend(Backend):
     ##  Emitted when the slicing process is aborted forcefully.
     slicingCancelled = Signal()
 
-    ##  Perform a slice of the scene.
+    @pyqtSlot()
-    def slice(self):
+    def stopSlicing(self):
-        Logger.log("d", "Starting slice job...")
+        self.backendStateChange.emit(BackendState.NotStarted)
-        if self._pause_slicing:
-            return
-        self._slice_start_time = time()
-        if not self._enabled or not self._global_container_stack:  # We shouldn't be slicing.
-            # try again in a short time
-            self._change_timer.start()
-            return
-
-        self.printDurationMessage.emit(0, [0])
-
-        self._stored_layer_data = []
-        self._stored_optimized_layer_data = []
-
         if self._slicing:  # We were already slicing. Stop the old job.
             self._terminate()
+            self._createSocket()
 
         if self._process_layers_job:  # We were processing layers. Stop that, the layers are going to change soon.
             self._process_layers_job.abort()
@@ -177,6 +170,33 @@ class CuraEngineBackend(Backend):
         if self._error_message:
             self._error_message.hide()
 
+    ##  Manually triggers a reslice
+    @pyqtSlot()
+    def forceSlice(self):
+        if self._use_timer:
+            self._change_timer.start()
+        else:
+            self.slice()
+
+    ##  Perform a slice of the scene.
+    def slice(self):
+        self._slice_start_time = time()
+        if not self._need_slicing:
+            self.processingProgress.emit(1.0)
+            self.backendStateChange.emit(BackendState.Done)
+            Logger.log("w", "Slice unnecessary, nothing has changed that needs reslicing.")
+            return
+
+        self.printDurationMessage.emit(0, [0])
+
+        self._stored_layer_data = []
+        self._stored_optimized_layer_data = []
+
+        if self._process is None:
+            self._createSocket()
+        self.stopSlicing()
+        self._engine_is_fresh = False  # Yes we're going to use the engine
+
         self.processingProgress.emit(0.0)
         self.backendStateChange.emit(BackendState.NotStarted)
 
@@ -189,21 +209,10 @@ class CuraEngineBackend(Backend):
         self._start_slice_job.start()
         self._start_slice_job.finished.connect(self._onStartSliceCompleted)
 
-
-    def pauseSlicing(self):
-        self.close()
-        self._pause_slicing = True
-        self.backendStateChange.emit(BackendState.Disabled)
-
-    def continueSlicing(self):
-        if self._pause_slicing:
-            self._pause_slicing = False
-            self.backendStateChange.emit(BackendState.NotStarted)
-
     ##  Terminate the engine process.
+    #   Start the engine process by calling _createSocket()
     def _terminate(self):
         self._slicing = False
-        self._restart = True
         self._stored_layer_data = []
         self._stored_optimized_layer_data = []
         if self._start_slice_job is not None:
@@ -225,9 +234,6 @@ class CuraEngineBackend(Backend):
 
             except Exception as e:  # terminating a process that is already terminating causes an exception, silently ignore this.
                 Logger.log("d", "Exception occurred while trying to kill the engine %s", str(e))
-        else:
-            # Process is none, but something did went wrong here. Try and re-create the socket
-            self._createSocket()
 
     ##  Event handler to call when the job to initiate the slicing process is
     #   completed.
@@ -249,7 +255,7 @@ class CuraEngineBackend(Backend):
             return
 
         if job.getResult() == StartSliceJob.StartJobResult.MaterialIncompatible:
-            if Application.getInstance().getPlatformActivity:
+            if Application.getInstance().platformActivity:
                 self._error_message = Message(catalog.i18nc("@info:status",
                                             "The selected material is incompatible with the selected machine or configuration."))
                 self._error_message.show()
@@ -259,7 +265,7 @@ class CuraEngineBackend(Backend):
             return
 
         if job.getResult() == StartSliceJob.StartJobResult.SettingError:
-            if Application.getInstance().getPlatformActivity:
+            if Application.getInstance().platformActivity:
                 extruders = list(ExtruderManager.getInstance().getMachineExtruders(self._global_container_stack.getId()))
                 error_keys = []
                 for extruder in extruders:
@@ -280,7 +286,7 @@ class CuraEngineBackend(Backend):
             return
 
         if job.getResult() == StartSliceJob.StartJobResult.BuildPlateError:
-            if Application.getInstance().getPlatformActivity:
+            if Application.getInstance().platformActivity:
                 self._error_message = Message(catalog.i18nc("@info:status", "Unable to slice because the prime tower or prime position(s) are invalid."))
                 self._error_message.show()
                 self.backendStateChange.emit(BackendState.Error)
@@ -288,7 +294,7 @@ class CuraEngineBackend(Backend):
                 self.backendStateChange.emit(BackendState.NotStarted)
 
         if job.getResult() == StartSliceJob.StartJobResult.NothingToSlice:
-            if Application.getInstance().getPlatformActivity:
+            if Application.getInstance().platformActivity:
                 self._error_message = Message(catalog.i18nc("@info:status", "Nothing to slice because none of the models fit the build volume. Please scale or rotate models to fit."))
                 self._error_message.show()
                 self.backendStateChange.emit(BackendState.Error)
@@ -303,37 +309,72 @@ class CuraEngineBackend(Backend):
 
         Logger.log("d", "Sending slice message took %s seconds", time() - self._slice_start_time )
 
+    ##  Determine enable or disable auto slicing. Return True for enable timer and False otherwise.
+    #   It disables when
+    #   - preference auto slice is off
+    #   - decorator isBlockSlicing is found (used in g-code reader)
+    def determineAutoSlicing(self):
+        enable_timer = True
+
+        if not Preferences.getInstance().getValue("general/auto_slice"):
+            enable_timer = False
+        for node in DepthFirstIterator(self._scene.getRoot()):
+            if node.callDecoration("isBlockSlicing"):
+                enable_timer = False
+                self.backendStateChange.emit(BackendState.Disabled)
+            gcode_list = node.callDecoration("getGCodeList")
+            if gcode_list is not None:
+                self._scene.gcode_list = gcode_list
+
+        if self._use_timer == enable_timer:
+            return self._use_timer
+        if enable_timer:
+            self.backendStateChange.emit(BackendState.NotStarted)
+            self.enableTimer()
+            return True
+        else:
+            self.disableTimer()
+            return False
+
     ##  Listener for when the scene has changed.
     #
     #   This should start a slice if the scene is now ready to slice.
     #
     #   \param source The scene node that was changed.
     def _onSceneChanged(self, source):
+        if self._tool_active:
+            # do it later
+            self._postponed_scene_change_sources.append(source)
+            return
+
         if type(source) is not SceneNode:
             return
 
-        if source is self._scene.getRoot():
+        root_scene_nodes_changed = False
-            return
+        if source == self._scene.getRoot():
+            num_objects = 0
+            for node in DepthFirstIterator(self._scene.getRoot()):
+                # For now this seems to be a reliable method to check for nodes that impact slicing
+                # From: SliceInfo, _onWriteStarted
+                if type(node) is not SceneNode or not node.getMeshData():
+                    continue
+                num_objects += 1
+            if num_objects != self._last_num_objects:
+                self._last_num_objects = num_objects
+                root_scene_nodes_changed = True
+            else:
+                return
 
-        should_pause = False
+        self.determineAutoSlicing()
-        for node in DepthFirstIterator(self._scene.getRoot()):
-            if node.callDecoration("isBlockSlicing"):
-                should_pause = True
-            gcode_list = node.callDecoration("getGCodeList")
-            if gcode_list is not None:
-                self._scene.gcode_list = gcode_list
 
-        if should_pause:
+        if not source.callDecoration("isGroup") and not root_scene_nodes_changed:
-            self.pauseSlicing()
+            if source.getMeshData() is None:
-        else:
+                return
-            self.continueSlicing()
+            if source.getMeshData().getVertices() is None:
-
+                return
-        if source.getMeshData() is None:
-            return
-
-        if source.getMeshData().getVertices() is None:
-            return
 
+        self.needsSlicing()
+        self.stopSlicing()
         self._onChanged()
 
     ##  Called when an error occurs in the socket connection towards the engine.
@@ -348,16 +389,34 @@ class CuraEngineBackend(Backend):
             return
 
         self._terminate()
+        self._createSocket()
 
         if error.getErrorCode() not in [Arcus.ErrorCode.BindFailedError, Arcus.ErrorCode.ConnectionResetError, Arcus.ErrorCode.Debug]:
             Logger.log("w", "A socket error caused the connection to be reset")
 
+    ##  Remove old layer data (if any)
+    def _clearLayerData(self):
+        for node in DepthFirstIterator(self._scene.getRoot()):
+            if node.callDecoration("getLayerData"):
+                node.getParent().removeChild(node)
+                break
+
+    ##  Convenient function: set need_slicing, emit state and clear layer data
+    def needsSlicing(self):
+        self._need_slicing = True
+        self.processingProgress.emit(0.0)
+        self.backendStateChange.emit(BackendState.NotStarted)
+        if not self._use_timer:
+            # With manually having to slice, we want to clear the old invalid layer data.
+            self._clearLayerData()
+
     ##  A setting has changed, so check if we must reslice.
     #
     #   \param instance The setting instance that has changed.
     #   \param property The property of the setting instance that has changed.
     def _onSettingChanged(self, instance, property):
         if property == "value": # Only reslice if the value has changed.
+            self.needsSlicing()
             self._onChanged()
 
     ##  Called when a sliced layer data message is received from the engine.
@@ -387,6 +446,7 @@ class CuraEngineBackend(Backend):
         self.processingProgress.emit(1.0)
 
         self._slicing = False
+        self._need_slicing = False
         Logger.log("d", "Slicing took %s seconds", time() - self._slice_start_time )
         if self._layer_view_active and (self._process_layers_job is None or not self._process_layers_job.isRunning()):
             self._process_layers_job = ProcessSlicedLayersJob.ProcessSlicedLayersJob(self._stored_optimized_layer_data)
@@ -420,22 +480,21 @@ class CuraEngineBackend(Backend):
     ##  Creates a new socket connection.
     def _createSocket(self):
         super()._createSocket(os.path.abspath(os.path.join(PluginRegistry.getInstance().getPluginPath(self.getPluginId()), "Cura.proto")))
-
+        self._engine_is_fresh = True
-    ##  Manually triggers a reslice
-    def forceSlice(self):
-        self._change_timer.start()
 
     ##  Called when anything has changed to the stuff that needs to be sliced.
     #
     #   This indicates that we should probably re-slice soon.
     def _onChanged(self, *args, **kwargs):
-        self._change_timer.start()
+        self.needsSlicing()
+        if self._use_timer:
+            self._change_timer.start()
 
     ##  Called when the back-end connects to the front-end.
     def _onBackendConnected(self):
         if self._restart:
-            self._onChanged()
             self._restart = False
+            self._onChanged()
 
     ##  Called when the user starts using some tool.
     #
@@ -444,9 +503,12 @@ class CuraEngineBackend(Backend):
     #
     #   \param tool The tool that the user is using.
     def _onToolOperationStarted(self, tool):
-        self._enabled = False  # Do not reslice when a tool is doing it's 'thing'
+        self._tool_active = True  # Do not react on scene change
-        self._terminate()  # Do not continue slicing once a tool has started
+        self.disableTimer()
-
+        # Restart engine as soon as possible, we know we want to slice afterwards
+        if not self._engine_is_fresh:
+            self._terminate()
+            self._createSocket()
 
     ##  Called when the user stops using some tool.
     #
@@ -454,8 +516,13 @@ class CuraEngineBackend(Backend):
     #
     #   \param tool The tool that the user was using.
     def _onToolOperationStopped(self, tool):
-        self._enabled = True  # Tool stop, start listening for changes again.
+        self._tool_active = False  # React on scene change again
-        
+        self.determineAutoSlicing()
+        # Process all the postponed scene changes
+        while self._postponed_scene_change_sources:
+            source = self._postponed_scene_change_sources.pop(0)
+            self._onSceneChanged(source)
+
     ##  Called when the user changes the active view mode.
     def _onActiveViewChanged(self):
         if Application.getInstance().getController().getActiveView():
@@ -480,7 +547,6 @@ class CuraEngineBackend(Backend):
             if self._process:
                 Logger.log("d", "Backend quit with return code %s. Resetting process and socket.", self._process.wait())
                 self._process = None
-            self._createSocket()
 
     ##  Called when the global container stack changes
     def _onGlobalStackChanged(self):
@@ -515,9 +581,34 @@ class CuraEngineBackend(Backend):
         if self._active_extruder_stack:
             self._active_extruder_stack.containersChanged.disconnect(self._onChanged)
 
-        self._active_extruder_stack = cura.Settings.ExtruderManager.getInstance().getActiveExtruderStack()
+        self._active_extruder_stack = ExtruderManager.getInstance().getActiveExtruderStack()
         if self._active_extruder_stack:
             self._active_extruder_stack.containersChanged.connect(self._onChanged)
 
     def _onProcessLayersFinished(self, job):
         self._process_layers_job = None
+
+    ##  Connect slice function to timer.
+    def enableTimer(self):
+        if not self._use_timer:
+            self._change_timer.timeout.connect(self.slice)
+            self._use_timer = True
+
+    ##  Disconnect slice function from timer.
+    #   This means that slicing will not be triggered automatically
+    def disableTimer(self):
+        if self._use_timer:
+            self._use_timer = False
+            self._change_timer.timeout.disconnect(self.slice)
+
+    def _onPreferencesChanged(self, preference):
+        if preference != "general/auto_slice":
+            return
+        auto_slice = self.determineAutoSlicing()
+        if auto_slice:
+            self._change_timer.start()
+
+    ##   Tickle the backend so in case of auto slicing, it starts the timer.
+    def tickle(self):
+        if self._use_timer:
+            self._change_timer.start()

plugins/CuraEngineBackend/ProcessSlicedLayersJob.py

@@ -8,6 +8,8 @@ from UM.Scene.Iterator.DepthFirstIterator import DepthFirstIterator
 from UM.Scene.SceneNode import SceneNode
 from UM.Application import Application
 from UM.Mesh.MeshData import MeshData
+from UM.Preferences import Preferences
+from UM.View.GL.OpenGLContext import OpenGLContext
 
 from UM.Message import Message
 from UM.i18n import i18nCatalog
@@ -15,6 +17,7 @@ from UM.Logger import Logger
 
 from UM.Math.Vector import Vector
 
+from cura.Settings.ExtruderManager import ExtruderManager
 from cura import LayerDataBuilder
 from cura import LayerDataDecorator
 from cura import LayerPolygon
@@ -24,6 +27,17 @@ from time import time
 catalog = i18nCatalog("cura")
 
 
+##  Return a 4-tuple with floats 0-1 representing the html color code
+#
+#   \param color_code html color code, i.e. "#FF0000" -> red
+def colorCodeToRGBA(color_code):
+    return [
+        int(color_code[1:3], 16) / 255,
+        int(color_code[3:5], 16) / 255,
+        int(color_code[5:7], 16) / 255,
+        1.0]
+
+
 class ProcessSlicedLayersJob(Job):
     def __init__(self, layers):
         super().__init__()
@@ -92,7 +106,6 @@ class ProcessSlicedLayersJob(Job):
             layer_data.addLayer(abs_layer_number)
             this_layer = layer_data.getLayer(abs_layer_number)
             layer_data.setLayerHeight(abs_layer_number, layer.height)
-            layer_data.setLayerThickness(abs_layer_number, layer.thickness)
 
             for p in range(layer.repeatedMessageCount("path_segment")):
                 polygon = layer.getRepeatedMessage("path_segment", p)
@@ -110,23 +123,28 @@ class ProcessSlicedLayersJob(Job):
 
                 line_widths = numpy.fromstring(polygon.line_width, dtype="f4")  # Convert bytearray to numpy array
                 line_widths = line_widths.reshape((-1,1))  # We get a linear list of pairs that make up the points, so make numpy interpret them correctly.
-                
+
+                # In the future, line_thicknesses should be given by CuraEngine as well.
+                # Currently the infill layer thickness also translates to line width
+                line_thicknesses = numpy.zeros(line_widths.shape, dtype="f4")
+                line_thicknesses[:] = layer.thickness / 1000  # from micrometer to millimeter
+
                 # Create a new 3D-array, copy the 2D points over and insert the right height.
                 # This uses manual array creation + copy rather than numpy.insert since this is
                 # faster.
                 new_points = numpy.empty((len(points), 3), numpy.float32)
                 if polygon.point_type == 0:  # Point2D
                     new_points[:, 0] = points[:, 0]
-                    new_points[:, 1] = layer.height / 1000 # layer height value is in backend representation
+                    new_points[:, 1] = layer.height / 1000  # layer height value is in backend representation
                     new_points[:, 2] = -points[:, 1]
                 else: # Point3D
                     new_points[:, 0] = points[:, 0]
                     new_points[:, 1] = points[:, 2]
                     new_points[:, 2] = -points[:, 1]
 
-                this_poly = LayerPolygon.LayerPolygon(layer_data, extruder, line_types, new_points, line_widths)
+                this_poly = LayerPolygon.LayerPolygon(extruder, line_types, new_points, line_widths, line_thicknesses)
                 this_poly.buildCache()
-                
+
                 this_layer.polygons.append(this_poly)
 
                 Job.yieldThread()
@@ -144,7 +162,35 @@ class ProcessSlicedLayersJob(Job):
                 self._progress.setProgress(progress)
 
         # We are done processing all the layers we got from the engine, now create a mesh out of the data
-        layer_mesh = layer_data.build()
+
+        # Find out colors per extruder
+        global_container_stack = Application.getInstance().getGlobalContainerStack()
+        manager = ExtruderManager.getInstance()
+        extruders = list(manager.getMachineExtruders(global_container_stack.getId()))
+        if extruders:
+            material_color_map = numpy.zeros((len(extruders), 4), dtype=numpy.float32)
+            for extruder in extruders:
+                material = extruder.findContainer({"type": "material"})
+                position = int(extruder.getMetaDataEntry("position", default="0"))  # Get the position
+                color_code = material.getMetaDataEntry("color_code")
+                color = colorCodeToRGBA(color_code)
+                material_color_map[position, :] = color
+        else:
+            # Single extruder via global stack.
+            material_color_map = numpy.zeros((1, 4), dtype=numpy.float32)
+            material = global_container_stack.findContainer({"type": "material"})
+            color_code = material.getMetaDataEntry("color_code")
+            if color_code is None:  # not all stacks have a material color
+                color_code = "#e0e000"
+            color = colorCodeToRGBA(color_code)
+            material_color_map[0, :] = color
+
+        # We have to scale the colors for compatibility mode
+        if OpenGLContext.isLegacyOpenGL() or bool(Preferences.getInstance().getValue("view/force_layer_view_compatibility_mode")):
+            line_type_brightness = 0.5  # for compatibility mode
+        else:
+            line_type_brightness = 1.0
+        layer_mesh = layer_data.build(material_color_map, line_type_brightness)
 
         if self._abort_requested:
             if self._progress:

plugins/CuraEngineBackend/StartSliceJob.py

@@ -16,8 +16,7 @@ from UM.Settings.Validator import ValidatorState
 from UM.Settings.SettingRelation import RelationType
 
 from cura.OneAtATimeIterator import OneAtATimeIterator
-
+from cura.Settings.ExtruderManager import ExtruderManager
-import cura.Settings
 
 class StartJobResult(IntEnum):
     Finished = 1
@@ -84,7 +83,7 @@ class StartSliceJob(Job):
             self.setResult(StartJobResult.BuildPlateError)
             return
 
-        for extruder_stack in cura.Settings.ExtruderManager.getInstance().getMachineExtruders(stack.getId()):
+        for extruder_stack in ExtruderManager.getInstance().getMachineExtruders(stack.getId()):
             material = extruder_stack.findContainer({"type": "material"})
             if material:
                 if material.getMetaDataEntry("compatible") == False:
@@ -149,7 +148,7 @@ class StartSliceJob(Job):
             self._buildGlobalSettingsMessage(stack)
             self._buildGlobalInheritsStackMessage(stack)
 
-            for extruder_stack in cura.Settings.ExtruderManager.getInstance().getMachineExtruders(stack.getId()):
+            for extruder_stack in ExtruderManager.getInstance().getMachineExtruders(stack.getId()):
                 self._buildExtruderMessage(extruder_stack)
 
             for group in object_groups:

plugins/CuraProfileReader/CuraProfileReader.py

@@ -2,7 +2,7 @@
 # Cura is released under the terms of the AGPLv3 or higher.
 import configparser
 
-from UM import PluginRegistry
+from UM.PluginRegistry import PluginRegistry
 from UM.Logger import Logger
 from UM.Settings.InstanceContainer import InstanceContainer  # The new profile to make.
 from cura.ProfileReader import ProfileReader

plugins/GCodeReader/GCodeReader.py

@@ -99,8 +99,11 @@ class GCodeReader(MeshReader):
         count = len(path)
         line_types = numpy.empty((count - 1, 1), numpy.int32)
         line_widths = numpy.empty((count - 1, 1), numpy.float32)
+        line_thicknesses = numpy.empty((count - 1, 1), numpy.float32)
         # TODO: need to calculate actual line width based on E values
         line_widths[:, 0] = 0.4
+        # TODO: need to calculate actual line heights
+        line_thicknesses[:, 0] = 0.2
         points = numpy.empty((count, 3), numpy.float32)
         i = 0
         for point in path:
@@ -113,7 +116,7 @@ class GCodeReader(MeshReader):
                     line_widths[i - 1] = 0.2
             i += 1
 
-        this_poly = LayerPolygon(self._layer_data_builder, self._extruder, line_types, points, line_widths)
+        this_poly = LayerPolygon(self._extruder, line_types, points, line_widths, line_thicknesses)
         this_poly.buildCache()
 
         this_layer.polygons.append(this_poly)
@@ -276,7 +279,10 @@ class GCodeReader(MeshReader):
                     self._layer += 1
                 current_path.clear()
 
-        layer_mesh = self._layer_data_builder.build()
+        material_color_map = numpy.zeros((10, 4), dtype = numpy.float32)
+        material_color_map[0, :] = [0.0, 0.7, 0.9, 1.0]
+        material_color_map[1, :] = [0.7, 0.9, 0.0, 1.0]
+        layer_mesh = self._layer_data_builder.build(material_color_map)
         decorator = LayerDataDecorator.LayerDataDecorator()
         decorator.setLayerData(layer_mesh)
         scene_node.addDecorator(decorator)

plugins/GCodeWriter/GCodeWriter.py

@@ -4,13 +4,10 @@
 from UM.Mesh.MeshWriter import MeshWriter
 from UM.Logger import Logger
 from UM.Application import Application
-import UM.Settings.ContainerRegistry
-
-from cura.CuraApplication import CuraApplication
-from cura.Settings.ExtruderManager import ExtruderManager
-
 from UM.Settings.InstanceContainer import InstanceContainer
 
+from cura.Settings.ExtruderManager import ExtruderManager
+
 import re #For escaping characters in the settings.
 import json
 import copy

plugins/LayerView/LayerPass.py

@@ -14,6 +14,7 @@ from UM.View.GL.OpenGL import OpenGL
 
 from cura.Settings.ExtruderManager import ExtruderManager
 
+
 import os.path
 
 ## RenderPass used to display g-code paths.
@@ -28,15 +29,37 @@ class LayerPass(RenderPass):
         self._extruder_manager = ExtruderManager.getInstance()
 
         self._layer_view = None
+        self._compatibility_mode = None
 
     def setLayerView(self, layerview):
-        self._layerview = layerview
+        self._layer_view = layerview
+        self._compatibility_mode = layerview.getCompatibilityMode()
 
     def render(self):
         if not self._layer_shader:
-            self._layer_shader = OpenGL.getInstance().createShaderProgram(os.path.join(PluginRegistry.getInstance().getPluginPath("LayerView"), "layers.shader"))
+            if self._compatibility_mode:
+                shader_filename = "layers.shader"
+            else:
+                shader_filename = "layers3d.shader"
+            self._layer_shader = OpenGL.getInstance().createShaderProgram(os.path.join(PluginRegistry.getInstance().getPluginPath("LayerView"), shader_filename))
         # Use extruder 0 if the extruder manager reports extruder index -1 (for single extrusion printers)
         self._layer_shader.setUniformValue("u_active_extruder", float(max(0, self._extruder_manager.activeExtruderIndex)))
+        if self._layer_view:
+            self._layer_shader.setUniformValue("u_layer_view_type", self._layer_view.getLayerViewType())
+            self._layer_shader.setUniformValue("u_extruder_opacity", self._layer_view.getExtruderOpacities())
+            self._layer_shader.setUniformValue("u_show_travel_moves", self._layer_view.getShowTravelMoves())
+            self._layer_shader.setUniformValue("u_show_helpers", self._layer_view.getShowHelpers())
+            self._layer_shader.setUniformValue("u_show_skin", self._layer_view.getShowSkin())
+            self._layer_shader.setUniformValue("u_show_infill", self._layer_view.getShowInfill())
+        else:
+            #defaults
+            self._layer_shader.setUniformValue("u_layer_view_type", 1)
+            self._layer_shader.setUniformValue("u_extruder_opacity", [1, 1, 1, 1])
+            self._layer_shader.setUniformValue("u_show_travel_moves", 0)
+            self._layer_shader.setUniformValue("u_show_helpers", 1)
+            self._layer_shader.setUniformValue("u_show_skin", 1)
+            self._layer_shader.setUniformValue("u_show_infill", 1)
+
         if not self._tool_handle_shader:
             self._tool_handle_shader = OpenGL.getInstance().createShaderProgram(Resources.getPath(Resources.Shaders, "toolhandle.shader"))
 
@@ -55,13 +78,15 @@ class LayerPass(RenderPass):
                     continue
 
                 # Render all layers below a certain number as line mesh instead of vertices.
-                if self._layerview._current_layer_num - self._layerview._solid_layers > -1 and not self._layerview._only_show_top_layers:
+                if self._layer_view._current_layer_num > -1 and ((not self._layer_view._only_show_top_layers) or (not self._layer_view.getCompatibilityMode())):
                     start = 0
                     end = 0
                     element_counts = layer_data.getElementCounts()
                     for layer, counts in element_counts.items():
-                        if layer + self._layerview._solid_layers > self._layerview._current_layer_num:
+                        if layer > self._layer_view._current_layer_num:
                             break
+                        if self._layer_view._minimum_layer_num > layer:
+                            start += counts
                         end += counts
 
                     # This uses glDrawRangeElements internally to only draw a certain range of lines.
@@ -72,11 +97,11 @@ class LayerPass(RenderPass):
                 # Create a new batch that is not range-limited
                 batch = RenderBatch(self._layer_shader, type = RenderBatch.RenderType.Solid)
 
-                if self._layerview._current_layer_mesh:
+                if self._layer_view._current_layer_mesh:
-                    batch.addItem(node.getWorldTransformation(), self._layerview._current_layer_mesh)
+                    batch.addItem(node.getWorldTransformation(), self._layer_view._current_layer_mesh)
 
-                if self._layerview._current_layer_jumps:
+                if self._layer_view._current_layer_jumps:
-                    batch.addItem(node.getWorldTransformation(), self._layerview._current_layer_jumps)
+                    batch.addItem(node.getWorldTransformation(), self._layer_view._current_layer_jumps)
 
                 if len(batch.items) > 0:
                     batch.render(self._scene.getActiveCamera())

plugins/LayerView/LayerView.py

@@ -13,15 +13,15 @@ from UM.Mesh.MeshBuilder import MeshBuilder
 from UM.Job import Job
 from UM.Preferences import Preferences
 from UM.Logger import Logger
-from UM.Scene.SceneNode import SceneNode
-from UM.View.RenderBatch import RenderBatch
 from UM.View.GL.OpenGL import OpenGL
 from UM.Message import Message
 from UM.Application import Application
+from UM.View.GL.OpenGLContext import OpenGLContext
 
 from cura.ConvexHullNode import ConvexHullNode
+from cura.Settings.ExtruderManager import ExtruderManager
 
-from PyQt5.QtCore import Qt, QTimer
+from PyQt5.QtCore import Qt
 from PyQt5.QtWidgets import QApplication
 
 from . import LayerViewProxy
@@ -36,11 +36,16 @@ import os.path
 
 ## View used to display g-code paths.
 class LayerView(View):
+    # Must match LayerView.qml
+    LAYER_VIEW_TYPE_MATERIAL_TYPE = 0
+    LAYER_VIEW_TYPE_LINE_TYPE = 1
+
     def __init__(self):
         super().__init__()
 
         self._max_layers = 0
         self._current_layer_num = 0
+        self._minimum_layer_num = 0
         self._current_layer_mesh = None
         self._current_layer_jumps = None
         self._top_layers_job = None
@@ -60,17 +65,42 @@ class LayerView(View):
         self._proxy = LayerViewProxy.LayerViewProxy()
         self._controller.getScene().getRoot().childrenChanged.connect(self._onSceneChanged)
 
+        self._resetSettings()
         self._legend_items = None
 
         Preferences.getInstance().addPreference("view/top_layer_count", 5)
         Preferences.getInstance().addPreference("view/only_show_top_layers", False)
+        Preferences.getInstance().addPreference("view/force_layer_view_compatibility_mode", False)
+
+        Preferences.getInstance().addPreference("layerview/layer_view_type", 0)
+        Preferences.getInstance().addPreference("layerview/extruder0_opacity", 1.0)
+        Preferences.getInstance().addPreference("layerview/extruder1_opacity", 1.0)
+        Preferences.getInstance().addPreference("layerview/extruder2_opacity", 1.0)
+        Preferences.getInstance().addPreference("layerview/extruder3_opacity", 1.0)
+
+        Preferences.getInstance().addPreference("layerview/show_travel_moves", False)
+        Preferences.getInstance().addPreference("layerview/show_helpers", True)
+        Preferences.getInstance().addPreference("layerview/show_skin", True)
+        Preferences.getInstance().addPreference("layerview/show_infill", True)
+
         Preferences.getInstance().preferenceChanged.connect(self._onPreferencesChanged)
+        self._updateWithPreferences()
 
         self._solid_layers = int(Preferences.getInstance().getValue("view/top_layer_count"))
         self._only_show_top_layers = bool(Preferences.getInstance().getValue("view/only_show_top_layers"))
+        self._compatibility_mode = True  # for safety
 
         self._wireprint_warning_message = Message(catalog.i18nc("@info:status", "Cura does not accurately display layers when Wire Printing is enabled"))
 
+    def _resetSettings(self):
+        self._layer_view_type = 0  # 0 is material color, 1 is color by linetype, 2 is speed
+        self._extruder_count = 0
+        self._extruder_opacity = [1.0, 1.0, 1.0, 1.0]
+        self._show_travel_moves = 0
+        self._show_helpers = 1
+        self._show_skin = 1
+        self._show_infill = 1
+
     def getActivity(self):
         return self._activity
 
@@ -79,6 +109,7 @@ class LayerView(View):
             # Currently the RenderPass constructor requires a size > 0
             # This should be fixed in RenderPass's constructor.
             self._layer_pass = LayerPass.LayerPass(1, 1)
+            self._compatibility_mode = OpenGLContext.isLegacyOpenGL() or bool(Preferences.getInstance().getValue("view/force_layer_view_compatibility_mode"))
             self._layer_pass.setLayerView(self)
             self.getRenderer().addRenderPass(self._layer_pass)
         return self._layer_pass
@@ -86,6 +117,9 @@ class LayerView(View):
     def getCurrentLayer(self):
         return self._current_layer_num
 
+    def getMinimumLayer(self):
+        return self._minimum_layer_num
+
     def _onSceneChanged(self, node):
         self.calculateMaxLayers()
 
@@ -136,6 +170,72 @@ class LayerView(View):
 
             self.currentLayerNumChanged.emit()
 
+    def setMinimumLayer(self, value):
+        if self._minimum_layer_num != value:
+            self._minimum_layer_num = value
+            if self._minimum_layer_num < 0:
+                self._minimum_layer_num = 0
+
+            self._startUpdateTopLayers()
+
+            self.currentLayerNumChanged.emit()
+
+    ##  Set the layer view type
+    #
+    #   \param layer_view_type integer as in LayerView.qml and this class
+    def setLayerViewType(self, layer_view_type):
+        self._layer_view_type = layer_view_type
+        self.currentLayerNumChanged.emit()
+
+    ##  Return the layer view type, integer as in LayerView.qml and this class
+    def getLayerViewType(self):
+        return self._layer_view_type
+
+    ##  Set the extruder opacity
+    #
+    #   \param extruder_nr 0..3
+    #   \param opacity 0.0 .. 1.0
+    def setExtruderOpacity(self, extruder_nr, opacity):
+        self._extruder_opacity[extruder_nr] = opacity
+        self.currentLayerNumChanged.emit()
+
+    def getExtruderOpacities(self):
+        return self._extruder_opacity
+
+    def setShowTravelMoves(self, show):
+        self._show_travel_moves = show
+        self.currentLayerNumChanged.emit()
+
+    def getShowTravelMoves(self):
+        return self._show_travel_moves
+
+    def setShowHelpers(self, show):
+        self._show_helpers = show
+        self.currentLayerNumChanged.emit()
+
+    def getShowHelpers(self):
+        return self._show_helpers
+
+    def setShowSkin(self, show):
+        self._show_skin = show
+        self.currentLayerNumChanged.emit()
+
+    def getShowSkin(self):
+        return self._show_skin
+
+    def setShowInfill(self, show):
+        self._show_infill = show
+        self.currentLayerNumChanged.emit()
+
+    def getShowInfill(self):
+        return self._show_infill
+
+    def getCompatibilityMode(self):
+        return self._compatibility_mode
+
+    def getExtruderCount(self):
+        return self._extruder_count
+
     def calculateMaxLayers(self):
         scene = self.getController().getScene()
         self._activity = True
@@ -167,6 +267,8 @@ class LayerView(View):
 
     maxLayersChanged = Signal()
     currentLayerNumChanged = Signal()
+    globalStackChanged = Signal()
+    preferencesChanged = Signal()
 
     ##  Hackish way to ensure the proxy is already created, which ensures that the layerview.qml is already created
     #   as this caused some issues.
@@ -176,6 +278,12 @@ class LayerView(View):
     def endRendering(self):
         pass
 
+    def enableLegend(self):
+        Application.getInstance().setViewLegendItems(self._getLegendItems())
+
+    def disableLegend(self):
+        Application.getInstance().setViewLegendItems([])
+
     def event(self, event):
         modifiers = QApplication.keyboardModifiers()
         ctrl_is_active = modifiers == Qt.ControlModifier
@@ -208,7 +316,8 @@ class LayerView(View):
             self._old_composite_shader = self._composite_pass.getCompositeShader()
             self._composite_pass.setCompositeShader(self._layerview_composite_shader)
 
-            Application.getInstance().setViewLegendItems(self._getLegendItems())
+            if self.getLayerViewType() == self.LAYER_VIEW_TYPE_LINE_TYPE or self._compatibility_mode:
+                self.enableLegend()
 
         elif event.type == Event.ViewDeactivateEvent:
             self._wireprint_warning_message.hide()
@@ -219,7 +328,7 @@ class LayerView(View):
             self._composite_pass.setLayerBindings(self._old_layer_bindings)
             self._composite_pass.setCompositeShader(self._old_composite_shader)
 
-            Application.getInstance().setViewLegendItems([])
+            self.disableLegend()
 
     def _onGlobalStackChanged(self):
         if self._global_container_stack:
@@ -227,7 +336,9 @@ class LayerView(View):
         self._global_container_stack = Application.getInstance().getGlobalContainerStack()
         if self._global_container_stack:
             self._global_container_stack.propertyChanged.connect(self._onPropertyChanged)
+            self._extruder_count = self._global_container_stack.getProperty("machine_extruder_count", "value")
             self._onPropertyChanged("wireframe_enabled", "value")
+            self.globalStackChanged.emit()
         else:
             self._wireprint_warning_message.hide()
 
@@ -239,6 +350,9 @@ class LayerView(View):
                 self._wireprint_warning_message.hide()
 
     def _startUpdateTopLayers(self):
+        if not self._compatibility_mode:
+            return
+
         if self._top_layers_job:
             self._top_layers_job.finished.disconnect(self._updateCurrentLayerMesh)
             self._top_layers_job.cancel()
@@ -261,14 +375,45 @@ class LayerView(View):
 
         self._top_layers_job = None
 
-    def _onPreferencesChanged(self, preference):
+    def _updateWithPreferences(self):
-        if preference != "view/top_layer_count" and preference != "view/only_show_top_layers":
-            return
-
         self._solid_layers = int(Preferences.getInstance().getValue("view/top_layer_count"))
         self._only_show_top_layers = bool(Preferences.getInstance().getValue("view/only_show_top_layers"))
+        self._compatibility_mode = OpenGLContext.isLegacyOpenGL() or bool(
+            Preferences.getInstance().getValue("view/force_layer_view_compatibility_mode"))
+
+        self.setLayerViewType(int(float(Preferences.getInstance().getValue("layerview/layer_view_type"))));
+
+        self.setExtruderOpacity(0, float(Preferences.getInstance().getValue("layerview/extruder0_opacity")))
+        self.setExtruderOpacity(1, float(Preferences.getInstance().getValue("layerview/extruder1_opacity")))
+        self.setExtruderOpacity(2, float(Preferences.getInstance().getValue("layerview/extruder2_opacity")))
+        self.setExtruderOpacity(3, float(Preferences.getInstance().getValue("layerview/extruder3_opacity")))
+
+        self.setShowTravelMoves(bool(Preferences.getInstance().getValue("layerview/show_travel_moves")))
+        self.setShowHelpers(bool(Preferences.getInstance().getValue("layerview/show_helpers")))
+        self.setShowSkin(bool(Preferences.getInstance().getValue("layerview/show_skin")))
+        self.setShowInfill(bool(Preferences.getInstance().getValue("layerview/show_infill")))
 
         self._startUpdateTopLayers()
+        self.preferencesChanged.emit()
+
+    def _onPreferencesChanged(self, preference):
+        if preference not in {
+            "view/top_layer_count",
+            "view/only_show_top_layers",
+            "view/force_layer_view_compatibility_mode",
+            "layerview/layer_view_type",
+            "layerview/extruder0_opacity",
+            "layerview/extruder1_opacity",
+            "layerview/extruder2_opacity",
+            "layerview/extruder3_opacity",
+            "layerview/show_travel_moves",
+            "layerview/show_helpers",
+            "layerview/show_skin",
+            "layerview/show_infill",
+            }:
+            return
+
+        self._updateWithPreferences()
 
     def _getLegendItems(self):
         if self._legend_items is None:

plugins/LayerView/LayerView.qml

@@ -13,13 +13,38 @@ Item
     width: UM.Theme.getSize("button").width
     height: UM.Theme.getSize("slider_layerview_size").height
 
+    Slider
+    {
+        id: sliderMinimumLayer
+        width: UM.Theme.getSize("slider_layerview_size").width
+        height: UM.Theme.getSize("slider_layerview_size").height
+        anchors.left: parent.left
+        anchors.leftMargin: UM.Theme.getSize("slider_layerview_margin").width * 0.2
+        orientation: Qt.Vertical
+        minimumValue: 0;
+        maximumValue: UM.LayerView.numLayers-1;
+        stepSize: 1
+
+        property real pixelsPerStep: ((height - UM.Theme.getSize("slider_handle").height) / (maximumValue - minimumValue)) * stepSize;
+
+        value: UM.LayerView.minimumLayer
+        onValueChanged: {
+            UM.LayerView.setMinimumLayer(value)
+            if (value > UM.LayerView.currentLayer) {
+                UM.LayerView.setCurrentLayer(value);
+            }
+        }
+
+        style: UM.Theme.styles.slider;
+    }
+
     Slider
     {
         id: slider
         width: UM.Theme.getSize("slider_layerview_size").width
         height: UM.Theme.getSize("slider_layerview_size").height
         anchors.left: parent.left
-        anchors.leftMargin: UM.Theme.getSize("slider_layerview_margin").width/2
+        anchors.leftMargin: UM.Theme.getSize("slider_layerview_margin").width * 0.8
         orientation: Qt.Vertical
         minimumValue: 0;
         maximumValue: UM.LayerView.numLayers;
@@ -28,7 +53,12 @@ Item
         property real pixelsPerStep: ((height - UM.Theme.getSize("slider_handle").height) / (maximumValue - minimumValue)) * stepSize;
 
         value: UM.LayerView.currentLayer
-        onValueChanged: UM.LayerView.setCurrentLayer(value)
+        onValueChanged: {
+                UM.LayerView.setCurrentLayer(value);
+                if (value < UM.LayerView.minimumLayer) {
+                    UM.LayerView.setMinimumLayer(value);
+                }
+            }
 
         style: UM.Theme.styles.slider;
 
@@ -45,7 +75,7 @@ Item
             border.color: UM.Theme.getColor("slider_groove_border")
             color: UM.Theme.getColor("tool_panel_background")
 
-            visible: UM.LayerView.getLayerActivity && Printer.getPlatformActivity ? true : false
+            visible: UM.LayerView.layerActivity && Printer.platformActivity ? true : false
 
             TextField
             {
@@ -96,6 +126,7 @@ Item
     }
 
     Rectangle {
+        id: slider_background
         anchors.left: parent.left
         anchors.verticalCenter: parent.verticalCenter
         z: slider.z - 1
@@ -114,4 +145,167 @@ Item
             }
         }
     }
+
+    Rectangle {
+        anchors.left: parent.left
+        anchors.verticalCenter: parent.verticalCenter
+        anchors.top: slider_background.bottom
+        anchors.topMargin: UM.Theme.getSize("default_margin").height
+        width: UM.Theme.getSize("slider_layerview_background").width * 3
+        height: slider.height + UM.Theme.getSize("default_margin").height * 2
+        color: UM.Theme.getColor("tool_panel_background");
+        border.width: UM.Theme.getSize("default_lining").width
+        border.color: UM.Theme.getColor("lining")
+
+        ListModel  // matches LayerView.py
+        {
+            id: layerViewTypes
+            ListElement {
+                text: "Material Color"
+                type_id: 0
+            }
+            ListElement {
+                text: "Line Type"
+                type_id: 1  // these ids match the switching in the shader
+            }
+        }
+
+        ComboBox
+        {
+            id: layerTypeCombobox
+            anchors.top: parent.top
+            anchors.left: parent.left
+            model: layerViewTypes
+            visible: !UM.LayerView.compatibilityMode
+            property int layer_view_type: UM.Preferences.getValue("layerview/layer_view_type")
+            currentIndex: layer_view_type  // index matches type_id
+            onActivated: {
+                // Combobox selection
+                var type_id = layerViewTypes.get(index).type_id;
+                UM.Preferences.setValue("layerview/layer_view_type", type_id);
+                updateLegend();
+            }
+            onModelChanged: {
+                updateLegend();
+            }
+            // Update visibility of legend.
+            function updateLegend() {
+                var type_id = layerViewTypes.get(currentIndex).type_id;
+                if (UM.LayerView.compatibilityMode || (type_id == 1)) {
+                    // Line type
+                    UM.LayerView.enableLegend();
+                } else {
+                    UM.LayerView.disableLegend();
+                }
+            }
+        }
+
+        Label
+        {
+            id: compatibilityModeLabel
+            anchors.top: parent.top
+            anchors.left: parent.left
+            text: catalog.i18nc("@label","Compatibility Mode")
+            visible: UM.LayerView.compatibilityMode
+        }
+
+        Connections {
+            target: UM.Preferences
+            onPreferenceChanged:
+            {
+                layerTypeCombobox.layer_view_type = UM.Preferences.getValue("layerview/layer_view_type");
+                view_settings.extruder0_checked = UM.Preferences.getValue("layerview/extruder0_opacity") > 0.5;
+                view_settings.extruder1_checked = UM.Preferences.getValue("layerview/extruder1_opacity") > 0.5;
+                view_settings.extruder2_checked = UM.Preferences.getValue("layerview/extruder2_opacity") > 0.5;
+                view_settings.extruder3_checked = UM.Preferences.getValue("layerview/extruder3_opacity") > 0.5;
+                view_settings.show_travel_moves = UM.Preferences.getValue("layerview/show_travel_moves");
+                view_settings.show_helpers = UM.Preferences.getValue("layerview/show_helpers");
+                view_settings.show_skin = UM.Preferences.getValue("layerview/show_skin");
+                view_settings.show_infill = UM.Preferences.getValue("layerview/show_infill");
+            }
+        }
+
+        ColumnLayout {
+            id: view_settings
+
+            property bool extruder0_checked: UM.Preferences.getValue("layerview/extruder0_opacity") > 0.5
+            property bool extruder1_checked: UM.Preferences.getValue("layerview/extruder1_opacity") > 0.5
+            property bool extruder2_checked: UM.Preferences.getValue("layerview/extruder2_opacity") > 0.5
+            property bool extruder3_checked: UM.Preferences.getValue("layerview/extruder3_opacity") > 0.5
+            property bool show_travel_moves: UM.Preferences.getValue("layerview/show_travel_moves")
+            property bool show_helpers: UM.Preferences.getValue("layerview/show_helpers")
+            property bool show_skin: UM.Preferences.getValue("layerview/show_skin")
+            property bool show_infill: UM.Preferences.getValue("layerview/show_infill")
+
+            anchors.top: UM.LayerView.compatibilityMode ? compatibilityModeLabel.bottom : layerTypeCombobox.bottom
+            anchors.topMargin: UM.Theme.getSize("default_margin").height
+            anchors.left: parent.left
+            anchors.leftMargin: UM.Theme.getSize("default_margin").width
+
+            CheckBox {
+                checked: view_settings.extruder0_checked
+                onClicked: {
+                    UM.Preferences.setValue("layerview/extruder0_opacity", checked ? 1.0 : 0.0);
+                }
+                text: "Extruder 1"
+                visible: !UM.LayerView.compatibilityMode && (UM.LayerView.extruderCount >= 1)
+            }
+            CheckBox {
+                checked: view_settings.extruder1_checked
+                onClicked: {
+                    UM.Preferences.setValue("layerview/extruder1_opacity", checked ? 1.0 : 0.0);
+                }
+                text: "Extruder 2"
+                visible: !UM.LayerView.compatibilityMode && (UM.LayerView.extruderCount >= 2)
+            }
+            CheckBox {
+                checked: view_settings.extruder2_checked
+                onClicked: {
+                    UM.Preferences.setValue("layerview/extruder2_opacity", checked ? 1.0 : 0.0);
+                }
+                text: "Extruder 3"
+                visible: !UM.LayerView.compatibilityMode && (UM.LayerView.etruderCount >= 3)
+            }
+            CheckBox {
+                checked: view_settings.extruder3_checked
+                onClicked: {
+                    UM.Preferences.setValue("layerview/extruder3_opacity", checked ? 1.0 : 0.0);
+                }
+                text: "Extruder 4"
+                visible: !UM.LayerView.compatibilityMode && (UM.LayerView.extruderCount >= 4)
+            }
+            Label {
+                text: "Other extruders always visible"
+                visible: !UM.LayerView.compatibilityMode && (UM.LayerView.extruderCount >= 5)
+            }
+            CheckBox {
+                checked: view_settings.show_travel_moves
+                onClicked: {
+                    UM.Preferences.setValue("layerview/show_travel_moves", checked);
+                }
+                text: catalog.i18nc("@label", "Show Travel Moves")
+            }
+            CheckBox {
+                checked: view_settings.show_helpers
+                onClicked: {
+                    UM.Preferences.setValue("layerview/show_helpers", checked);
+                }
+                text: catalog.i18nc("@label", "Show Helpers")
+            }
+            CheckBox {
+                checked: view_settings.show_skin
+                onClicked: {
+                    UM.Preferences.setValue("layerview/show_skin", checked);
+                }
+                text: catalog.i18nc("@label", "Show Shell")
+            }
+            CheckBox {
+                checked: view_settings.show_infill
+                onClicked: {
+                    UM.Preferences.setValue("layerview/show_infill", checked);
+                }
+                text: catalog.i18nc("@label", "Show Infill")
+            }
+        }
+    }
 }

plugins/LayerView/LayerViewProxy.py

@@ -16,9 +16,11 @@ class LayerViewProxy(QObject):
     currentLayerChanged = pyqtSignal()
     maxLayersChanged = pyqtSignal()
     activityChanged = pyqtSignal()
+    globalStackChanged = pyqtSignal()
+    preferencesChanged = pyqtSignal()
 
     @pyqtProperty(bool, notify = activityChanged)
-    def getLayerActivity(self):
+    def layerActivity(self):
         active_view = self._controller.getActiveView()
         if type(active_view) == LayerView.LayerView.LayerView:
             return active_view.getActivity()
@@ -36,6 +38,12 @@ class LayerViewProxy(QObject):
         if type(active_view) == LayerView.LayerView.LayerView:
             return active_view.getCurrentLayer()
 
+    @pyqtProperty(int, notify = currentLayerChanged)
+    def minimumLayer(self):
+        active_view = self._controller.getActiveView()
+        if type(active_view) == LayerView.LayerView.LayerView:
+            return active_view.getMinimumLayer()
+
     busyChanged = pyqtSignal()
     @pyqtProperty(bool, notify = busyChanged)
     def busy(self):
@@ -44,13 +52,90 @@ class LayerViewProxy(QObject):
             return active_view.isBusy()
 
         return False
-    
+
+    @pyqtProperty(bool, notify = preferencesChanged)
+    def compatibilityMode(self):
+        active_view = self._controller.getActiveView()
+        if type(active_view) == LayerView.LayerView.LayerView:
+            return active_view.getCompatibilityMode()
+
+        return False
+
     @pyqtSlot(int)
     def setCurrentLayer(self, layer_num):
         active_view = self._controller.getActiveView()
         if type(active_view) == LayerView.LayerView.LayerView:
             active_view.setLayer(layer_num)
 
+    @pyqtSlot(int)
+    def setMinimumLayer(self, layer_num):
+        active_view = self._controller.getActiveView()
+        if type(active_view) == LayerView.LayerView.LayerView:
+            active_view.setMinimumLayer(layer_num)
+
+    @pyqtSlot(int)
+    def setLayerViewType(self, layer_view_type):
+        active_view = self._controller.getActiveView()
+        if type(active_view) == LayerView.LayerView.LayerView:
+            active_view.setLayerViewType(layer_view_type)
+
+    @pyqtSlot(result = int)
+    def getLayerViewType(self):
+        active_view = self._controller.getActiveView()
+        if type(active_view) == LayerView.LayerView.LayerView:
+            return active_view.getLayerViewType()
+        return 0
+
+    # Opacity 0..1
+    @pyqtSlot(int, float)
+    def setExtruderOpacity(self, extruder_nr, opacity):
+        active_view = self._controller.getActiveView()
+        if type(active_view) == LayerView.LayerView.LayerView:
+            active_view.setExtruderOpacity(extruder_nr, opacity)
+
+    @pyqtSlot(int)
+    def setShowTravelMoves(self, show):
+        active_view = self._controller.getActiveView()
+        if type(active_view) == LayerView.LayerView.LayerView:
+            active_view.setShowTravelMoves(show)
+
+    @pyqtSlot(int)
+    def setShowHelpers(self, show):
+        active_view = self._controller.getActiveView()
+        if type(active_view) == LayerView.LayerView.LayerView:
+            active_view.setShowHelpers(show)
+
+    @pyqtSlot(int)
+    def setShowSkin(self, show):
+        active_view = self._controller.getActiveView()
+        if type(active_view) == LayerView.LayerView.LayerView:
+            active_view.setShowSkin(show)
+
+    @pyqtSlot(int)
+    def setShowInfill(self, show):
+        active_view = self._controller.getActiveView()
+        if type(active_view) == LayerView.LayerView.LayerView:
+            active_view.setShowInfill(show)
+
+    @pyqtProperty(int, notify = globalStackChanged)
+    def extruderCount(self):
+        active_view = self._controller.getActiveView()
+        if type(active_view) == LayerView.LayerView.LayerView:
+            return active_view.getExtruderCount()
+        return 0
+
+    @pyqtSlot()
+    def enableLegend(self):
+        active_view = self._controller.getActiveView()
+        if type(active_view) == LayerView.LayerView.LayerView:
+            active_view.enableLegend()
+
+    @pyqtSlot()
+    def disableLegend(self):
+        active_view = self._controller.getActiveView()
+        if type(active_view) == LayerView.LayerView.LayerView:
+            active_view.disableLegend()
+
     def _layerActivityChanged(self):
         self.activityChanged.emit()
             
@@ -63,10 +148,18 @@ class LayerViewProxy(QObject):
 
     def _onBusyChanged(self):
         self.busyChanged.emit()
-        
+
+    def _onGlobalStackChanged(self):
+        self.globalStackChanged.emit()
+
+    def _onPreferencesChanged(self):
+        self.preferencesChanged.emit()
+
     def _onActiveViewChanged(self):
         active_view = self._controller.getActiveView()
         if type(active_view) == LayerView.LayerView.LayerView:
             active_view.currentLayerNumChanged.connect(self._onLayerChanged)
             active_view.maxLayersChanged.connect(self._onMaxLayersChanged)
             active_view.busyChanged.connect(self._onBusyChanged)
+            active_view.globalStackChanged.connect(self._onGlobalStackChanged)
+            active_view.preferencesChanged.connect(self._onPreferencesChanged)

plugins/LayerView/layers.shader

@@ -3,29 +3,147 @@ vertex =
     uniform highp mat4 u_modelViewProjectionMatrix;
     uniform lowp float u_active_extruder;
     uniform lowp float u_shade_factor;
+    uniform highp int u_layer_view_type;
 
+    attribute highp float a_extruder;
+    attribute highp float a_line_type;
     attribute highp vec4 a_vertex;
     attribute lowp vec4 a_color;
+    attribute lowp vec4 a_material_color;
+
     varying lowp vec4 v_color;
+    varying float v_line_type;
+
     void main()
     {
         gl_Position = u_modelViewProjectionMatrix * a_vertex;
-        // shade the color depending on the extruder index stored in the alpha component of the color
+        // shade the color depending on the extruder index
-        v_color = (a_color.a == u_active_extruder) ? a_color : a_color * u_shade_factor;
+        v_color = a_color;
-        v_color.a = 1.0;
+        // 8 and 9 are travel moves
+        if ((a_line_type != 8.0) && (a_line_type != 9.0)) {
+            v_color = (a_extruder == u_active_extruder) ? v_color : vec4(u_shade_factor * v_color.rgb, v_color.a);
+        }
+
+        v_line_type = a_line_type;
     }
 
 fragment =
     varying lowp vec4 v_color;
+    varying float v_line_type;
+
+    uniform int u_show_travel_moves;
+    uniform int u_show_helpers;
+    uniform int u_show_skin;
+    uniform int u_show_infill;
 
     void main()
     {
+        if ((u_show_travel_moves == 0) && (v_line_type >= 7.5) && (v_line_type <= 9.5)) {  // actually, 8 and 9
+            // discard movements
+            discard;
+        }
+        // support: 4, 5, 7, 10
+        if ((u_show_helpers == 0) && (
+            ((v_line_type >= 3.5) && (v_line_type <= 4.5)) ||
+            ((v_line_type >= 6.5) && (v_line_type <= 7.5)) ||
+            ((v_line_type >= 9.5) && (v_line_type <= 10.5)) ||
+            ((v_line_type >= 4.5) && (v_line_type <= 5.5))
+            )) {
+            discard;
+        }
+        // skin: 1, 2, 3
+        if ((u_show_skin == 0) && (
+            (v_line_type >= 0.5) && (v_line_type <= 3.5)
+            )) {
+            discard;
+        }
+        // infill:
+        if ((u_show_infill == 0) && (v_line_type >= 5.5) && (v_line_type <= 6.5)) {
+            // discard movements
+            discard;
+        }
+
         gl_FragColor = v_color;
     }
 
+vertex41core =
+    #version 410
+    uniform highp mat4 u_modelViewProjectionMatrix;
+    uniform lowp float u_active_extruder;
+    uniform lowp float u_shade_factor;
+    uniform highp int u_layer_view_type;
+
+    in highp float a_extruder;
+    in highp float a_line_type;
+    in highp vec4 a_vertex;
+    in lowp vec4 a_color;
+    in lowp vec4 a_material_color;
+
+    out lowp vec4 v_color;
+    out float v_line_type;
+
+    void main()
+    {
+        gl_Position = u_modelViewProjectionMatrix * a_vertex;
+        v_color = a_color;
+        if ((a_line_type != 8) && (a_line_type != 9)) {
+            v_color = (a_extruder == u_active_extruder) ? v_color : vec4(u_shade_factor * v_color.rgb, v_color.a);
+        }
+
+        v_line_type = a_line_type;
+    }
+
+fragment41core =
+    #version 410
+    in lowp vec4 v_color;
+    in float v_line_type;
+    out vec4 frag_color;
+
+    uniform int u_show_travel_moves;
+    uniform int u_show_helpers;
+    uniform int u_show_skin;
+    uniform int u_show_infill;
+
+    void main()
+    {
+        if ((u_show_travel_moves == 0) && (v_line_type >= 7.5) && (v_line_type <= 9.5)) {  // actually, 8 and 9
+            // discard movements
+            discard;
+        }
+        // helpers: 4, 5, 7, 10
+        if ((u_show_helpers == 0) && (
+            ((v_line_type >= 3.5) && (v_line_type <= 4.5)) ||
+            ((v_line_type >= 6.5) && (v_line_type <= 7.5)) ||
+            ((v_line_type >= 9.5) && (v_line_type <= 10.5)) ||
+            ((v_line_type >= 4.5) && (v_line_type <= 5.5))
+            )) {
+            discard;
+        }
+        // skin: 1, 2, 3
+        if ((u_show_skin == 0) && (
+            (v_line_type >= 0.5) && (v_line_type <= 3.5)
+            )) {
+            discard;
+        }
+        // infill:
+        if ((u_show_infill == 0) && (v_line_type >= 5.5) && (v_line_type <= 6.5)) {
+            // discard movements
+            discard;
+        }
+
+        frag_color = v_color;
+    }
+
 [defaults]
 u_active_extruder = 0.0
 u_shade_factor = 0.60
+u_layer_view_type = 0
+u_extruder_opacity = [1.0, 1.0, 1.0, 1.0]
+
+u_show_travel_moves = 0
+u_show_helpers = 1
+u_show_skin = 1
+u_show_infill = 1
 
 [bindings]
 u_modelViewProjectionMatrix = model_view_projection_matrix
@@ -33,3 +151,6 @@ u_modelViewProjectionMatrix = model_view_projection_matrix
 [attributes]
 a_vertex = vertex
 a_color = color
+a_extruder = extruder
+a_line_type = line_type
+a_material_color = material_color

plugins/LayerView/layers3d.shader

@@ -0,0 +1,264 @@
+[shaders]
+vertex41core =
+    #version 410
+    uniform highp mat4 u_modelViewProjectionMatrix;
+
+    uniform highp mat4 u_modelMatrix;
+    uniform highp mat4 u_viewProjectionMatrix;
+    uniform lowp float u_active_extruder;
+    uniform lowp int u_layer_view_type;
+    uniform lowp vec4 u_extruder_opacity;  // currently only for max 4 extruders, others always visible
+
+    uniform highp mat4 u_normalMatrix;
+
+    in highp vec4 a_vertex;
+    in lowp vec4 a_color;
+    in lowp vec4 a_material_color;
+    in highp vec4 a_normal;
+    in highp vec2 a_line_dim;  // line width and thickness
+    in highp int a_extruder;  // Note: cannot use this in compatibility, int is only available in newer OpenGL.
+    in highp float a_line_type;
+
+    out lowp vec4 v_color;
+
+    out highp vec3 v_vertex;
+    out highp vec3 v_normal;
+    out lowp vec2 v_line_dim;
+    out highp int v_extruder;
+    out highp vec4 v_extruder_opacity;
+    out float v_line_type;
+
+    out lowp vec4 f_color;
+    out highp vec3 f_vertex;
+    out highp vec3 f_normal;
+
+    void main()
+    {
+        vec4 v1_vertex = a_vertex;
+        v1_vertex.y -= a_line_dim.y / 2;  // half layer down
+
+        vec4 world_space_vert = u_modelMatrix * v1_vertex;
+        gl_Position = world_space_vert;
+        // shade the color depending on the extruder index stored in the alpha component of the color
+
+        switch (u_layer_view_type) {
+            case 0:  // "Material color"
+                v_color = a_material_color;
+                break;
+            case 1:  // "Line type"
+                v_color = a_color;
+                break;
+        }
+
+        v_vertex = world_space_vert.xyz;
+        v_normal = (u_normalMatrix * normalize(a_normal)).xyz;
+        v_line_dim = a_line_dim;
+        v_extruder = a_extruder;
+        v_line_type = a_line_type;
+        v_extruder_opacity = u_extruder_opacity;
+
+        // for testing without geometry shader
+        f_color = v_color;
+        f_vertex = v_vertex;
+        f_normal = v_normal;
+    }
+
+geometry41core =
+    #version 410
+
+    uniform highp mat4 u_viewProjectionMatrix;
+    uniform int u_show_travel_moves;
+    uniform int u_show_helpers;
+    uniform int u_show_skin;
+    uniform int u_show_infill;
+
+    layout(lines) in;
+    layout(triangle_strip, max_vertices = 26) out;
+
+    in vec4 v_color[];
+    in vec3 v_vertex[];
+    in vec3 v_normal[];
+    in vec2 v_line_dim[];
+    in int v_extruder[];
+    in vec4 v_extruder_opacity[];
+    in float v_line_type[];
+
+    out vec4 f_color;
+    out vec3 f_normal;
+    out vec3 f_vertex;
+
+    // Set the set of variables and EmitVertex
+    void myEmitVertex(vec3 vertex, vec4 color, vec3 normal, vec4 pos) {
+        f_vertex = vertex;
+        f_color = color;
+        f_normal = normal;
+        gl_Position = pos;
+        EmitVertex();
+    }
+
+    void main()
+    {
+        vec4 g_vertex_delta;
+        vec3 g_vertex_normal_horz;  // horizontal and vertical in respect to layers
+        vec4 g_vertex_offset_horz;  // vec4 to match gl_in[x].gl_Position
+        vec3 g_vertex_normal_vert;
+        vec4 g_vertex_offset_vert;
+        vec3 g_vertex_normal_horz_head;
+        vec4 g_vertex_offset_horz_head;
+
+        float size_x;
+        float size_y;
+
+        if ((v_extruder_opacity[0][v_extruder[0]] == 0.0) && (v_line_type[0] != 8) && (v_line_type[0] != 9)) {
+            return;
+        }
+        // See LayerPolygon; 8 is MoveCombingType, 9 is RetractionType
+        if ((u_show_travel_moves == 0) && ((v_line_type[0] == 8) || (v_line_type[0] == 9))) {
+            return;
+        }
+        if ((u_show_helpers == 0) && ((v_line_type[0] == 4) || (v_line_type[0] == 5) || (v_line_type[0] == 7) || (v_line_type[0] == 10))) {
+            return;
+        }
+        if ((u_show_skin == 0) && ((v_line_type[0] == 1) || (v_line_type[0] == 2) || (v_line_type[0] == 3))) {
+            return;
+        }
+        if ((u_show_infill == 0) && (v_line_type[0] == 6)) {
+            return;
+        }
+
+        if ((v_line_type[0] == 8) || (v_line_type[0] == 9)) {
+            // fixed size for movements
+            size_x = 0.2;
+        } else {
+            size_x = v_line_dim[0].x / 2 + 0.01;  // radius, and make it nicely overlapping
+        }
+        size_y = v_line_dim[0].y / 2 + 0.01;
+
+        g_vertex_delta = gl_in[1].gl_Position - gl_in[0].gl_Position;
+        g_vertex_normal_horz_head = normalize(vec3(-g_vertex_delta.x, -g_vertex_delta.y, -g_vertex_delta.z));
+        g_vertex_offset_horz_head = vec4(g_vertex_normal_horz_head * size_x, 0.0);
+
+        g_vertex_normal_horz = normalize(vec3(g_vertex_delta.z, g_vertex_delta.y, -g_vertex_delta.x));
+
+        g_vertex_offset_horz = vec4(g_vertex_normal_horz * size_x, 0.0); //size * g_vertex_normal_horz;
+        g_vertex_normal_vert = vec3(0.0, 1.0, 0.0);
+        g_vertex_offset_vert = vec4(g_vertex_normal_vert * size_y, 0.0);
+
+        if ((v_line_type[0] == 8) || (v_line_type[0] == 9)) {
+            // Travels: flat plane with pointy ends
+            myEmitVertex(v_vertex[0], v_color[0], g_vertex_normal_vert, u_viewProjectionMatrix * (gl_in[0].gl_Position + g_vertex_offset_horz + g_vertex_offset_vert));
+            myEmitVertex(v_vertex[0], v_color[0], g_vertex_normal_vert, u_viewProjectionMatrix * (gl_in[0].gl_Position + g_vertex_offset_horz_head + g_vertex_offset_vert));
+            myEmitVertex(v_vertex[0], v_color[0], g_vertex_normal_vert, u_viewProjectionMatrix * (gl_in[0].gl_Position - g_vertex_offset_horz + g_vertex_offset_vert));
+            myEmitVertex(v_vertex[0], v_color[0], g_vertex_normal_vert, u_viewProjectionMatrix * (gl_in[0].gl_Position + g_vertex_offset_horz + g_vertex_offset_vert));
+            myEmitVertex(v_vertex[1], v_color[1], g_vertex_normal_vert, u_viewProjectionMatrix * (gl_in[1].gl_Position - g_vertex_offset_horz + g_vertex_offset_vert));
+            myEmitVertex(v_vertex[1], v_color[1], g_vertex_normal_vert, u_viewProjectionMatrix * (gl_in[1].gl_Position + g_vertex_offset_horz + g_vertex_offset_vert));
+            myEmitVertex(v_vertex[1], v_color[1], g_vertex_normal_vert, u_viewProjectionMatrix * (gl_in[1].gl_Position - g_vertex_offset_horz_head + g_vertex_offset_vert));
+
+            EndPrimitive();
+        } else {
+            // All normal lines are rendered as 3d tubes.
+            myEmitVertex(v_vertex[0], v_color[0], g_vertex_normal_horz, u_viewProjectionMatrix * (gl_in[0].gl_Position + g_vertex_offset_horz));
+            myEmitVertex(v_vertex[1], v_color[1], g_vertex_normal_horz, u_viewProjectionMatrix * (gl_in[1].gl_Position + g_vertex_offset_horz));
+            myEmitVertex(v_vertex[0], v_color[0], g_vertex_normal_vert, u_viewProjectionMatrix * (gl_in[0].gl_Position + g_vertex_offset_vert));
+            myEmitVertex(v_vertex[1], v_color[1], g_vertex_normal_vert, u_viewProjectionMatrix * (gl_in[1].gl_Position + g_vertex_offset_vert));
+            myEmitVertex(v_vertex[0], v_color[0], -g_vertex_normal_horz, u_viewProjectionMatrix * (gl_in[0].gl_Position - g_vertex_offset_horz));
+            myEmitVertex(v_vertex[1], v_color[1], -g_vertex_normal_horz, u_viewProjectionMatrix * (gl_in[1].gl_Position - g_vertex_offset_horz));
+            myEmitVertex(v_vertex[0], v_color[0], -g_vertex_normal_vert, u_viewProjectionMatrix * (gl_in[0].gl_Position - g_vertex_offset_vert));
+            myEmitVertex(v_vertex[1], v_color[1], -g_vertex_normal_vert, u_viewProjectionMatrix * (gl_in[1].gl_Position - g_vertex_offset_vert));
+            myEmitVertex(v_vertex[0], v_color[0], g_vertex_normal_horz, u_viewProjectionMatrix * (gl_in[0].gl_Position + g_vertex_offset_horz));
+            myEmitVertex(v_vertex[1], v_color[1], g_vertex_normal_horz, u_viewProjectionMatrix * (gl_in[1].gl_Position + g_vertex_offset_horz));
+
+            EndPrimitive();
+
+            // left side
+            myEmitVertex(v_vertex[0], v_color[0], g_vertex_normal_horz, u_viewProjectionMatrix * (gl_in[0].gl_Position + g_vertex_offset_horz));
+            myEmitVertex(v_vertex[0], v_color[0], g_vertex_normal_vert, u_viewProjectionMatrix * (gl_in[0].gl_Position + g_vertex_offset_vert));
+            myEmitVertex(v_vertex[0], v_color[0], g_vertex_normal_horz_head, u_viewProjectionMatrix * (gl_in[0].gl_Position + g_vertex_offset_horz_head));
+            myEmitVertex(v_vertex[0], v_color[0], -g_vertex_normal_horz, u_viewProjectionMatrix * (gl_in[0].gl_Position - g_vertex_offset_horz));
+
+            EndPrimitive();
+
+            myEmitVertex(v_vertex[0], v_color[0], -g_vertex_normal_horz, u_viewProjectionMatrix * (gl_in[0].gl_Position - g_vertex_offset_horz));
+            myEmitVertex(v_vertex[0], v_color[0], -g_vertex_normal_vert, u_viewProjectionMatrix * (gl_in[0].gl_Position - g_vertex_offset_vert));
+            myEmitVertex(v_vertex[0], v_color[0], g_vertex_normal_horz_head, u_viewProjectionMatrix * (gl_in[0].gl_Position + g_vertex_offset_horz_head));
+            myEmitVertex(v_vertex[0], v_color[0], g_vertex_normal_horz, u_viewProjectionMatrix * (gl_in[0].gl_Position + g_vertex_offset_horz));
+
+            EndPrimitive();
+
+            // right side
+            myEmitVertex(v_vertex[1], v_color[1], g_vertex_normal_horz, u_viewProjectionMatrix * (gl_in[1].gl_Position + g_vertex_offset_horz));
+            myEmitVertex(v_vertex[1], v_color[1], g_vertex_normal_vert, u_viewProjectionMatrix * (gl_in[1].gl_Position + g_vertex_offset_vert));
+            myEmitVertex(v_vertex[1], v_color[1], -g_vertex_normal_horz_head, u_viewProjectionMatrix * (gl_in[1].gl_Position - g_vertex_offset_horz_head));
+            myEmitVertex(v_vertex[1], v_color[1], -g_vertex_normal_horz, u_viewProjectionMatrix * (gl_in[1].gl_Position - g_vertex_offset_horz));
+
+            EndPrimitive();
+
+            myEmitVertex(v_vertex[1], v_color[1], -g_vertex_normal_horz, u_viewProjectionMatrix * (gl_in[1].gl_Position - g_vertex_offset_horz));
+            myEmitVertex(v_vertex[1], v_color[1], -g_vertex_normal_vert, u_viewProjectionMatrix * (gl_in[1].gl_Position - g_vertex_offset_vert));
+            myEmitVertex(v_vertex[1], v_color[1], -g_vertex_normal_horz_head, u_viewProjectionMatrix * (gl_in[1].gl_Position - g_vertex_offset_horz_head));
+            myEmitVertex(v_vertex[1], v_color[1], g_vertex_normal_horz, u_viewProjectionMatrix * (gl_in[1].gl_Position + g_vertex_offset_horz));
+
+            EndPrimitive();
+        }
+    }
+
+fragment41core =
+    #version 410
+    in lowp vec4 f_color;
+    in lowp vec3 f_normal;
+    in lowp vec3 f_vertex;
+
+    out vec4 frag_color;
+
+    uniform mediump vec4 u_ambientColor;
+    uniform highp vec3 u_lightPosition;
+
+    void main()
+    {
+        mediump vec4 finalColor = vec4(0.0);
+        float alpha = f_color.a;
+
+        finalColor.rgb += f_color.rgb * 0.3;
+
+        highp vec3 normal = normalize(f_normal);
+        highp vec3 light_dir = normalize(u_lightPosition - f_vertex);
+
+        // Diffuse Component
+        highp float NdotL = clamp(dot(normal, light_dir), 0.0, 1.0);
+        finalColor += (NdotL * f_color);
+        finalColor.a = alpha;  // Do not change alpha in any way
+
+        frag_color = finalColor;
+    }
+
+
+[defaults]
+u_active_extruder = 0.0
+u_layer_view_type = 0
+u_extruder_opacity = [1.0, 1.0, 1.0, 1.0]
+
+u_specularColor = [0.4, 0.4, 0.4, 1.0]
+u_ambientColor = [0.3, 0.3, 0.3, 0.0]
+u_diffuseColor = [1.0, 0.79, 0.14, 1.0]
+u_shininess = 20.0
+
+u_show_travel_moves = 0
+u_show_helpers = 1
+u_show_skin = 1
+u_show_infill = 1
+
+[bindings]
+u_modelViewProjectionMatrix = model_view_projection_matrix
+u_modelMatrix = model_matrix
+u_viewProjectionMatrix = view_projection_matrix
+u_normalMatrix = normal_matrix
+u_lightPosition = light_0_position
+
+[attributes]
+a_vertex = vertex
+a_color = color
+a_normal = normal
+a_line_dim = line_dim
+a_extruder = extruder
+a_material_color = material_color
+a_line_type = line_type

plugins/LayerView/layerview_composite.shader

@@ -33,6 +33,7 @@ fragment =
 
     void main()
     {
+        // blur kernel
         kernel[0] = 0.0; kernel[1] = 1.0; kernel[2] = 0.0;
         kernel[3] = 1.0; kernel[4] = -4.0; kernel[5] = 1.0;
         kernel[6] = 0.0; kernel[7] = 1.0; kernel[8] = 0.0;
@@ -63,6 +64,75 @@ fragment =
         }
     }
 
+vertex41core =
+    #version 410
+    uniform highp mat4 u_modelViewProjectionMatrix;
+    in highp vec4 a_vertex;
+    in highp vec2 a_uvs;
+
+    out highp vec2 v_uvs;
+
+    void main()
+    {
+        gl_Position = u_modelViewProjectionMatrix * a_vertex;
+        v_uvs = a_uvs;
+    }
+
+fragment41core =
+    #version 410
+    uniform sampler2D u_layer0;
+    uniform sampler2D u_layer1;
+    uniform sampler2D u_layer2;
+
+    uniform vec2 u_offset[9];
+
+    uniform vec4 u_background_color;
+    uniform float u_outline_strength;
+    uniform vec4 u_outline_color;
+
+    in vec2 v_uvs;
+
+    float kernel[9];
+
+    const vec3 x_axis = vec3(1.0, 0.0, 0.0);
+    const vec3 y_axis = vec3(0.0, 1.0, 0.0);
+    const vec3 z_axis = vec3(0.0, 0.0, 1.0);
+
+    out vec4 frag_color;
+
+    void main()
+    {
+        // blur kernel
+        kernel[0] = 0.0; kernel[1] = 1.0; kernel[2] = 0.0;
+        kernel[3] = 1.0; kernel[4] = -4.0; kernel[5] = 1.0;
+        kernel[6] = 0.0; kernel[7] = 1.0; kernel[8] = 0.0;
+
+        vec4 result = u_background_color;
+
+        vec4 main_layer = texture(u_layer0, v_uvs);
+        vec4 selection_layer = texture(u_layer1, v_uvs);
+        vec4 layerview_layer = texture(u_layer2, v_uvs);
+
+        result = main_layer * main_layer.a + result * (1.0 - main_layer.a);
+        result = layerview_layer * layerview_layer.a + result * (1.0 - layerview_layer.a);
+
+        vec4 sum = vec4(0.0);
+        for (int i = 0; i < 9; i++)
+        {
+            vec4 color = vec4(texture(u_layer1, v_uvs.xy + u_offset[i]).a);
+            sum += color * (kernel[i] / u_outline_strength);
+        }
+
+        if((selection_layer.rgb == x_axis || selection_layer.rgb == y_axis || selection_layer.rgb == z_axis))
+        {
+            frag_color = result;
+        }
+        else
+        {
+            frag_color = mix(result, u_outline_color, abs(sum.a));
+        }
+    }
+
 [defaults]
 u_layer0 = 0
 u_layer1 = 1

plugins/MachineSettingsAction/MachineSettingsAction.py

@@ -6,11 +6,13 @@ from UM.FlameProfiler import pyqtSlot
 
 from cura.MachineAction import MachineAction
 
-import UM.Application
+from UM.Application import Application
-import UM.Settings.InstanceContainer
+from UM.Settings.InstanceContainer import InstanceContainer
-import UM.Settings.DefinitionContainer
+from UM.Settings.ContainerRegistry import ContainerRegistry
-import UM.Settings.ContainerRegistry
+from UM.Settings.DefinitionContainer import DefinitionContainer
-import UM.Logger
+from UM.Logger import Logger
+
+from cura.Settings.CuraContainerRegistry import CuraContainerRegistry
 
 import UM.i18n
 catalog = UM.i18n.i18nCatalog("cura")
@@ -25,11 +27,11 @@ class MachineSettingsAction(MachineAction):
 
         self._container_index = 0
 
-        self._container_registry = UM.Settings.ContainerRegistry.getInstance()
+        self._container_registry = ContainerRegistry.getInstance()
         self._container_registry.containerAdded.connect(self._onContainerAdded)
 
     def _reset(self):
-        global_container_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_container_stack = Application.getInstance().getGlobalContainerStack()
         if not global_container_stack:
             return
 
@@ -45,7 +47,7 @@ class MachineSettingsAction(MachineAction):
             self.containerIndexChanged.emit()
 
     def _createDefinitionChangesContainer(self, global_container_stack, container_index = None):
-        definition_changes_container = UM.Settings.InstanceContainer(global_container_stack.getName() + "_settings")
+        definition_changes_container = InstanceContainer(global_container_stack.getName() + "_settings")
         definition = global_container_stack.getBottom()
         definition_changes_container.setDefinition(definition)
         definition_changes_container.addMetaDataEntry("type", "definition_changes")
@@ -64,24 +66,24 @@ class MachineSettingsAction(MachineAction):
 
     def _onContainerAdded(self, container):
         # Add this action as a supported action to all machine definitions
-        if isinstance(container, UM.Settings.DefinitionContainer) and container.getMetaDataEntry("type") == "machine":
+        if isinstance(container, DefinitionContainer) and container.getMetaDataEntry("type") == "machine":
             if container.getProperty("machine_extruder_count", "value") > 1:
                 # Multiextruder printers are not currently supported
-                UM.Logger.log("d", "Not attaching MachineSettingsAction to %s; Multi-extrusion printers are not supported", container.getId())
+                Logger.log("d", "Not attaching MachineSettingsAction to %s; Multi-extrusion printers are not supported", container.getId())
                 return
 
-            UM.Application.getInstance().getMachineActionManager().addSupportedAction(container.getId(), self.getKey())
+            Application.getInstance().getMachineActionManager().addSupportedAction(container.getId(), self.getKey())
 
     @pyqtSlot()
     def forceUpdate(self):
         # Force rebuilding the build volume by reloading the global container stack.
         # This is a bit of a hack, but it seems quick enough.
-        UM.Application.getInstance().globalContainerStackChanged.emit()
+        Application.getInstance().globalContainerStackChanged.emit()
 
     @pyqtSlot()
     def updateHasMaterialsMetadata(self):
         # Updates the has_materials metadata flag after switching gcode flavor
-        global_container_stack = UM.Application.getInstance().getGlobalContainerStack()
+        global_container_stack = Application.getInstance().getGlobalContainerStack()
         if global_container_stack:
             definition = global_container_stack.getBottom()
             if definition.getProperty("machine_gcode_flavor", "value") == "UltiGCode" and not definition.getMetaDataEntry("has_materials", False):
@@ -111,4 +113,4 @@ class MachineSettingsAction(MachineAction):
                     empty_material = self._container_registry.findInstanceContainers(id = "empty_material")[0]
                     global_container_stack.replaceContainer(material_index, empty_material)
 
-                UM.Application.getInstance().globalContainerStackChanged.emit()
+                Application.getInstance().globalContainerStackChanged.emit()

plugins/PerObjectSettingsTool/PerObjectSettingVisibilityHandler.py

@@ -4,16 +4,17 @@
 from PyQt5.QtCore import QObject, pyqtProperty, pyqtSignal
 
 from UM.Application import Application
+from UM.Settings.ContainerRegistry import ContainerRegistry
 from UM.Settings.SettingInstance import SettingInstance
 from UM.Logger import Logger
-import UM.Settings.Models
+import UM.Settings.Models.SettingVisibilityHandler
 
 from cura.Settings.ExtruderManager import ExtruderManager #To get global-inherits-stack setting values from different extruders.
 from cura.Settings.SettingOverrideDecorator import SettingOverrideDecorator
 
 ##  The per object setting visibility handler ensures that only setting
 #   definitions that have a matching instance Container are returned as visible.
-class PerObjectSettingVisibilityHandler(UM.Settings.Models.SettingVisibilityHandler):
+class PerObjectSettingVisibilityHandler(UM.Settings.Models.SettingVisibilityHandler.SettingVisibilityHandler):
     def __init__(self, parent = None, *args, **kwargs):
         super().__init__(parent = parent, *args, **kwargs)
 
@@ -72,7 +73,7 @@ class PerObjectSettingVisibilityHandler(UM.Settings.Models.SettingVisibilityHand
 
                     # Use the found stack number to get the right stack to copy the value from.
                     if stack_nr in ExtruderManager.getInstance().extruderIds:
-                        stack = UM.Settings.ContainerRegistry.getInstance().findContainerStacks(id = ExtruderManager.getInstance().extruderIds[stack_nr])[0]
+                        stack = ContainerRegistry.getInstance().findContainerStacks(id = ExtruderManager.getInstance().extruderIds[stack_nr])[0]
 
                     # Use the raw property to set the value (so the inheritance doesn't break)
                     if stack is not None:

plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py

@@ -8,7 +8,7 @@ catalog = i18nCatalog("cura")
 from . import RemovableDrivePlugin
 
 import string
-import ctypes
+import ctypes   # type: ignore
 from ctypes import wintypes # Using ctypes.wintypes in the code below does not seem to work
 
 from UM.i18n import i18nCatalog

plugins/RemovableDriveOutputDevice/__init__.py

@@ -2,7 +2,7 @@
 # Cura is released under the terms of the AGPLv3 or higher.
 
 from UM.Platform import Platform
-
+from UM.Logger import Logger
 from UM.i18n import i18nCatalog
 catalog = i18nCatalog("cura")
 

plugins/SliceInfoPlugin/SliceInfo.py

@@ -1,5 +1,6 @@
 # Copyright (c) 2015 Ultimaker B.V.
 # Cura is released under the terms of the AGPLv3 or higher.
+from typing import Any
 
 from cura.CuraApplication import CuraApplication
 
@@ -26,8 +27,8 @@ import json
 catalog = i18nCatalog("cura")
 
 class SliceInfoJob(Job):
-    data = None
+    data = None # type: Any
-    url = None
+    url = None  # type: str
 
     def __init__(self, url, data):
         super().__init__()

plugins/SolidView/SolidView.py

@@ -12,12 +12,13 @@ from UM.Settings.Validator import ValidatorState
 from UM.Math.Color import Color
 from UM.View.GL.OpenGL import OpenGL
 
-import cura.Settings
 from cura.Settings.ExtruderManager import ExtruderManager
+from cura.Settings.ExtrudersModel import ExtrudersModel
 
 import math
 
 ## Standard view for mesh models.
+
 class SolidView(View):
     def __init__(self):
         super().__init__()
@@ -27,7 +28,7 @@ class SolidView(View):
         self._enabled_shader = None
         self._disabled_shader = None
 
-        self._extruders_model = cura.Settings.ExtrudersModel()
+        self._extruders_model = ExtrudersModel()
 
     def beginRendering(self):
         scene = self.getController().getScene()

plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py

@@ -1,4 +1,4 @@
-# Copyright (c) 2016 Ultimaker B.V.
+# Copyright (c) 2017 Ultimaker B.V.
 # Cura is released under the terms of the AGPLv3 or higher.
 
 from UM.i18n import i18nCatalog
@@ -8,7 +8,8 @@ from UM.Signal import signalemitter
 
 from UM.Message import Message
 
-import UM.Settings
+import UM.Settings.ContainerRegistry
+import UM.Version #To compare firmware version numbers.
 
 from cura.PrinterOutputDevice import PrinterOutputDevice, ConnectionState
 import cura.Settings.ExtruderManager
@@ -97,6 +98,8 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
 
         self._material_ids = [""] * self._num_extruders
         self._hotend_ids = [""] * self._num_extruders
+        self._target_bed_temperature = 0
+        self._processing_preheat_requests = True
 
         self.setPriority(2) # Make sure the output device gets selected above local file output
         self.setName(key)
@@ -197,11 +200,11 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
 
     def _onAuthenticationRequired(self, reply, authenticator):
         if self._authentication_id is not None and self._authentication_key is not None:
-            Logger.log("d", "Authentication was required. Setting up authenticator.")
+            Logger.log("d", "Authentication was required. Setting up authenticator with ID %s",self._authentication_id )
             authenticator.setUser(self._authentication_id)
             authenticator.setPassword(self._authentication_key)
         else:
-            Logger.log("d", "No authentication was required. The id is: %s", self._authentication_id)
+            Logger.log("d", "No authentication was required. The ID is: %s", self._authentication_id)
 
     def getProperties(self):
         return self._properties
@@ -220,12 +223,17 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
     def getKey(self):
         return self._key
 
-    ##  Name of the printer (as returned from the zeroConf properties)
+    ##  The IP address of the printer.
+    @pyqtProperty(str, constant = True)
+    def address(self):
+        return self._properties.get(b"address", b"").decode("utf-8")
+
+    ##  Name of the printer (as returned from the ZeroConf properties)
     @pyqtProperty(str, constant = True)
     def name(self):
         return self._properties.get(b"name", b"").decode("utf-8")
 
-    ##  Firmware version (as returned from the zeroConf properties)
+    ##  Firmware version (as returned from the ZeroConf properties)
     @pyqtProperty(str, constant=True)
     def firmwareVersion(self):
         return self._properties.get(b"firmware_version", b"").decode("utf-8")
@@ -235,6 +243,57 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
     def ipAddress(self):
         return self._address
 
+    ##  Pre-heats the heated bed of the printer.
+    #
+    #   \param temperature The temperature to heat the bed to, in degrees
+    #   Celsius.
+    #   \param duration How long the bed should stay warm, in seconds.
+    @pyqtSlot(float, float)
+    def preheatBed(self, temperature, duration):
+        temperature = round(temperature) #The API doesn't allow floating point.
+        duration = round(duration)
+        if UM.Version.Version(self.firmwareVersion) < UM.Version.Version("3.5.92"): #Real bed pre-heating support is implemented from 3.5.92 and up.
+            self.setTargetBedTemperature(temperature = temperature) #No firmware-side duration support then.
+            return
+        url = QUrl("http://" + self._address + self._api_prefix + "printer/bed/pre_heat")
+        if duration > 0:
+            data = """{"temperature": "%i", "timeout": "%i"}""" % (temperature, duration)
+        else:
+            data = """{"temperature": "%i"}""" % temperature
+        Logger.log("i", "Pre-heating bed to %i degrees.", temperature)
+        put_request = QNetworkRequest(url)
+        put_request.setHeader(QNetworkRequest.ContentTypeHeader, "application/json")
+        self._processing_preheat_requests = False
+        self._manager.put(put_request, data.encode())
+        self._preheat_bed_timer.start(self._preheat_bed_timeout * 1000) #Times 1000 because it needs to be provided as milliseconds.
+        self.preheatBedRemainingTimeChanged.emit()
+
+    ##  Cancels pre-heating the heated bed of the printer.
+    #
+    #   If the bed is not pre-heated, nothing happens.
+    @pyqtSlot()
+    def cancelPreheatBed(self):
+        Logger.log("i", "Cancelling pre-heating of the bed.")
+        self.preheatBed(temperature = 0, duration = 0)
+        self._preheat_bed_timer.stop()
+        self._preheat_bed_timer.setInterval(0)
+        self.preheatBedRemainingTimeChanged.emit()
+
+    ##  Changes the target bed temperature on the printer.
+    #
+    #   /param temperature The new target temperature of the bed.
+    def _setTargetBedTemperature(self, temperature):
+        if self._target_bed_temperature == temperature:
+            return
+        self._target_bed_temperature = temperature
+        self.targetBedTemperatureChanged.emit()
+
+        url = QUrl("http://" + self._address + self._api_prefix + "printer/bed/temperature/target")
+        data = str(temperature)
+        put_request = QNetworkRequest(url)
+        put_request.setHeader(QNetworkRequest.ContentTypeHeader, "application/json")
+        self._manager.put(put_request, data.encode())
+
     def _stopCamera(self):
         self._camera_timer.stop()
         if self._image_reply:
@@ -271,14 +330,14 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
         if auth_state == AuthState.AuthenticationRequested:
             Logger.log("d", "Authentication state changed to authentication requested.")
             self.setAcceptsCommands(False)
-            self.setConnectionText(i18n_catalog.i18nc("@info:status", "Connected over the network to {0}. Please approve the access request on the printer.").format(self.name))
+            self.setConnectionText(i18n_catalog.i18nc("@info:status", "Connected over the network. Please approve the access request on the printer."))
             self._authentication_requested_message.show()
             self._authentication_request_active = True
             self._authentication_timer.start()  # Start timer so auth will fail after a while.
         elif auth_state == AuthState.Authenticated:
             Logger.log("d", "Authentication state changed to authenticated")
             self.setAcceptsCommands(True)
-            self.setConnectionText(i18n_catalog.i18nc("@info:status", "Connected over the network to {0}.").format(self.name))
+            self.setConnectionText(i18n_catalog.i18nc("@info:status", "Connected over the network."))
             self._authentication_requested_message.hide()
             if self._authentication_request_active:
                 self._authentication_succeeded_message.show()
@@ -291,7 +350,7 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
             self.sendMaterialProfiles()
         elif auth_state == AuthState.AuthenticationDenied:
             self.setAcceptsCommands(False)
-            self.setConnectionText(i18n_catalog.i18nc("@info:status", "Connected over the network to {0}. No access to control the printer.").format(self.name))
+            self.setConnectionText(i18n_catalog.i18nc("@info:status", "Connected over the network. No access to control the printer."))
             self._authentication_requested_message.hide()
             if self._authentication_request_active:
                 if self._authentication_timer.remainingTime() > 0:
@@ -466,6 +525,8 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
 
         bed_temperature = self._json_printer_state["bed"]["temperature"]["current"]
         self._setBedTemperature(bed_temperature)
+        target_bed_temperature = self._json_printer_state["bed"]["temperature"]["target"]
+        self._setTargetBedTemperature(target_bed_temperature)
 
         head_x = self._json_printer_state["heads"][0]["position"]["x"]
         head_y = self._json_printer_state["heads"][0]["position"]["y"]
@@ -473,6 +534,30 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
         self._updateHeadPosition(head_x, head_y, head_z)
         self._updatePrinterState(self._json_printer_state["status"])
 
+        if self._processing_preheat_requests:
+            try:
+                is_preheating = self._json_printer_state["bed"]["pre_heat"]["active"]
+            except KeyError: #Old firmware doesn't support that.
+                pass #Don't update the pre-heat remaining time.
+            else:
+                if is_preheating:
+                    try:
+                        remaining_preheat_time = self._json_printer_state["bed"]["pre_heat"]["remaining"]
+                    except KeyError: #Error in firmware. If "active" is supported, "remaining" should also be supported.
+                        pass #Anyway, don't update.
+                    else:
+                        #Only update if time estimate is significantly off (>5000ms).
+                        #Otherwise we get issues with latency causing the timer to count inconsistently.
+                        if abs(self._preheat_bed_timer.remainingTime() - remaining_preheat_time * 1000) > 5000:
+                            self._preheat_bed_timer.setInterval(remaining_preheat_time * 1000)
+                            self._preheat_bed_timer.start()
+                            self.preheatBedRemainingTimeChanged.emit()
+                else: #Not pre-heating. Must've cancelled.
+                    if self._preheat_bed_timer.isActive():
+                        self._preheat_bed_timer.setInterval(0)
+                        self._preheat_bed_timer.stop()
+                        self.preheatBedRemainingTimeChanged.emit()
+
 
     def close(self):
         Logger.log("d", "Closing connection of printer %s with ip %s", self._key, self._address)
@@ -564,7 +649,7 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
                 warnings.append(i18n_catalog.i18nc("@label", "Not enough material for spool {0}.").format(index+1))
 
             # Check if the right cartridges are loaded. Any failure in these results in a warning.
-            extruder_manager = cura.Settings.ExtruderManager.getInstance()
+            extruder_manager = cura.Settings.ExtruderManager.ExtruderManager.getInstance()
             if print_information.materialLengths[index] != 0:
                 variant = extruder_manager.getExtruderStack(index).findContainer({"type": "variant"})
                 core_name = self._json_printer_state["heads"][0]["extruders"][index]["hotend"]["id"]
@@ -581,7 +666,7 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
                                    remote_material_guid,
                                    material.getMetaDataEntry("GUID"))
 
-                        remote_materials = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(type = "material", GUID = remote_material_guid, read_only = True)
+                        remote_materials = UM.Settings.ContainerRegistry.ContainerRegistry.getInstance().findInstanceContainers(type = "material", GUID = remote_material_guid, read_only = True)
                         remote_material_name = "Unknown"
                         if remote_materials:
                             remote_material_name = remote_materials[0].getName()
@@ -643,9 +728,8 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
         ## Check if this machine was authenticated before.
         self._authentication_id = Application.getInstance().getGlobalContainerStack().getMetaDataEntry("network_authentication_id", None)
         self._authentication_key = Application.getInstance().getGlobalContainerStack().getMetaDataEntry("network_authentication_key", None)
-
+        Logger.log("d", "Loaded authentication id %s from the metadata entry", self._authentication_id)
         self._update_timer.start()
-        #self.startCamera()
 
     ##  Stop requesting data from printer
     def disconnect(self):
@@ -760,7 +844,7 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
 
     ##  Check if the authentication request was allowed by the printer.
     def _checkAuthentication(self):
-        Logger.log("d", "Checking if authentication is correct.")
+        Logger.log("d", "Checking if authentication is correct for id %s", self._authentication_id)
         self._manager.get(QNetworkRequest(QUrl("http://" + self._address + self._api_prefix + "auth/check/" + str(self._authentication_id))))
 
     ##  Request a authentication key from the printer so we can be authenticated
@@ -773,7 +857,7 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
 
     ##  Send all material profiles to the printer.
     def sendMaterialProfiles(self):
-        for container in UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(type = "material"):
+        for container in UM.Settings.ContainerRegistry.ContainerRegistry.getInstance().findInstanceContainers(type = "material"):
             try:
                 xml_data = container.serialize()
                 if xml_data == "" or xml_data is None:
@@ -907,7 +991,7 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
                 if status_code == 401:
                     if self._authentication_state != AuthState.AuthenticationRequested:
                         # Only request a new authentication when we have not already done so.
-                        Logger.log("i", "Not authenticated. Attempting to request authentication")
+                        Logger.log("i", "Not authenticated (Current auth state is %s). Attempting to request authentication",  self._authentication_state )
                         self._requestAuthentication()
                 elif status_code == 403:
                     # If we already had an auth (eg; didn't request one), we only need a single 403 to see it as denied.
@@ -917,6 +1001,7 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
                 elif status_code == 200:
                     self.setAuthenticationState(AuthState.Authenticated)
                     global_container_stack = Application.getInstance().getGlobalContainerStack()
+
                     ## Save authentication details.
                     if global_container_stack:
                         if "network_authentication_key" in global_container_stack.getMetaData():
@@ -928,9 +1013,9 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
                         else:
                             global_container_stack.addMetaDataEntry("network_authentication_id", self._authentication_id)
                     Application.getInstance().saveStack(global_container_stack)  # Force save so we are sure the data is not lost.
-                    Logger.log("i", "Authentication succeeded")
+                    Logger.log("i", "Authentication succeeded for id %s", self._authentication_id)
                 else:  # Got a response that we didn't expect, so something went wrong.
-                    Logger.log("w", "While trying to authenticate, we got an unexpected response: %s", reply.attribute(QNetworkRequest.HttpStatusCodeAttribute))
+                    Logger.log("e", "While trying to authenticate, we got an unexpected response: %s", reply.attribute(QNetworkRequest.HttpStatusCodeAttribute))
                     self.setAuthenticationState(AuthState.NotAuthenticated)
 
             elif "auth/check" in reply_url:  # Check if we are authenticated (user can refuse this!)
@@ -951,6 +1036,7 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
 
                 global_container_stack = Application.getInstance().getGlobalContainerStack()
                 if global_container_stack:  # Remove any old data.
+                    Logger.log("d", "Removing old network authentication data as a new one was requested.")
                     global_container_stack.removeMetaDataEntry("network_authentication_key")
                     global_container_stack.removeMetaDataEntry("network_authentication_id")
                     Application.getInstance().saveStack(global_container_stack)  # Force saving so we don't keep wrong auth data.
@@ -973,10 +1059,22 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
                 self._progress_message.hide()
 
         elif reply.operation() == QNetworkAccessManager.PutOperation:
-            if status_code == 204:
+            if "printer/bed/pre_heat" in reply_url: #Pre-heat command has completed. Re-enable syncing pre-heating.
+                self._processing_preheat_requests = True
+            if status_code in [200, 201, 202, 204]:
                 pass  # Request was successful!
             else:
-                Logger.log("d", "Something went wrong when trying to update data of API (%s). Message: %s Statuscode: %s", reply_url, reply.readAll(), status_code)
+                operation_type = "Unknown"
+                if reply.operation() == QNetworkAccessManager.GetOperation:
+                    operation_type = "Get"
+                elif reply.operation() == QNetworkAccessManager.PutOperation:
+                    operation_type = "Put"
+                elif reply.operation() == QNetworkAccessManager.PostOperation:
+                    operation_type = "Post"
+                elif reply.operation() == QNetworkAccessManager.DeleteOperation:
+                    operation_type = "Delete"
+
+                Logger.log("d", "Something went wrong when trying to update data of API (%s). Message: %s Statuscode: %s, operation: %s", reply_url, reply.readAll(), status_code, operation_type)
         else:
             Logger.log("d", "NetworkPrinterOutputDevice got an unhandled operation %s", reply.operation())
 

plugins/UM3NetworkPrinting/NetworkPrinterOutputDevicePlugin.py

@@ -1,7 +1,10 @@
+# Copyright (c) 2017 Ultimaker B.V.
+# Cura is released under the terms of the AGPLv3 or higher.
+
 from UM.OutputDevice.OutputDevicePlugin import OutputDevicePlugin
 from . import NetworkPrinterOutputDevice
 
-from zeroconf import Zeroconf, ServiceBrowser, ServiceStateChange, ServiceInfo
+from zeroconf import Zeroconf, ServiceBrowser, ServiceStateChange, ServiceInfo  # type: ignore
 from UM.Logger import Logger
 from UM.Signal import Signal, signalemitter
 from UM.Application import Application
@@ -75,9 +78,13 @@ class NetworkPrinterOutputDevicePlugin(OutputDevicePlugin):
             self._manual_instances.append(address)
             self._preferences.setValue("um3networkprinting/manual_instances", ",".join(self._manual_instances))
 
-        name = address
         instance_name = "manual:%s" % address
-        properties = { b"name": name.encode("utf-8"), b"manual": b"true", b"incomplete": b"true" }
+        properties = {
+            b"name": address.encode("utf-8"),
+            b"address": address.encode("utf-8"),
+            b"manual": b"true",
+            b"incomplete": b"true"
+        }
 
         if instance_name not in self._printers:
             # Add a preliminary printer instance
@@ -112,10 +119,23 @@ class NetworkPrinterOutputDevicePlugin(OutputDevicePlugin):
                 if status_code == 200:
                     system_info = json.loads(bytes(reply.readAll()).decode("utf-8"))
                     address = reply.url().host()
-                    name = ("%s (%s)" % (system_info["name"], address))
 
                     instance_name = "manual:%s" % address
-                    properties = { b"name": name.encode("utf-8"), b"firmware_version": system_info["firmware"].encode("utf-8"), b"manual": b"true" }
+                    machine = "unknown"
+                    if "variant" in system_info:
+                        variant = system_info["variant"]
+                        if variant == "Ultimaker 3":
+                            machine = "9066"
+                        elif variant == "Ultimaker 3 Extended":
+                            machine = "9511"
+
+                    properties = {
+                        b"name": system_info["name"].encode("utf-8"),
+                        b"address": address.encode("utf-8"),
+                        b"firmware_version": system_info["firmware"].encode("utf-8"),
+                        b"manual": b"true",
+                        b"machine": machine.encode("utf-8")
+                    }
                     if instance_name in self._printers:
                         # Only replace the printer if it is still in the list of (manual) printers
                         self.removePrinter(instance_name)
@@ -196,12 +216,13 @@ class NetworkPrinterOutputDevicePlugin(OutputDevicePlugin):
                 info = zeroconf.get_service_info(service_type, name)
 
             if info:
-                type_of_device = info.properties.get(b"type", None).decode("utf-8")
+                type_of_device = info.properties.get(b"type", None)
-                if type_of_device == "printer":
+                if type_of_device:
-                    address = '.'.join(map(lambda n: str(n), info.address))
+                    if type_of_device == b"printer":
-                    self.addPrinterSignal.emit(str(name), address, info.properties)
+                        address = '.'.join(map(lambda n: str(n), info.address))
-                else:
+                        self.addPrinterSignal.emit(str(name), address, info.properties)
-                    Logger.log("w", "The type of the found device is '%s', not 'printer'! Ignoring.." %type_of_device )
+                    else:
+                        Logger.log("w", "The type of the found device is '%s', not 'printer'! Ignoring.." % type_of_device )
             else:
                 Logger.log("w", "Could not get information about %s" % name)
 

plugins/USBPrinting/USBPrinterOutputDevice.py

@@ -2,7 +2,7 @@
 # Cura is released under the terms of the AGPLv3 or higher.
 
 from .avr_isp import stk500v2, ispBase, intelHex
-import serial
+import serial   # type: ignore
 import threading
 import time
 import queue
@@ -124,6 +124,16 @@ class USBPrinterOutputDevice(PrinterOutputDevice):
     def _homeBed(self):
         self._sendCommand("G28 Z")
 
+    ##  A name for the device.
+    @pyqtProperty(str, constant = True)
+    def name(self):
+        return self.getName()
+
+    ##  The address of the device.
+    @pyqtProperty(str, constant = True)
+    def address(self):
+        return self._serial_port
+
     def startPrint(self):
         self.writeStarted.emit(self)
         gcode_list = getattr( Application.getInstance().getController().getScene(), "gcode_list")
@@ -435,9 +445,13 @@ class USBPrinterOutputDevice(PrinterOutputDevice):
     #   is ignored.
     def requestWrite(self, nodes, file_name = None, filter_by_machine = False, file_handler = None):
         container_stack = Application.getInstance().getGlobalContainerStack()
-        if container_stack.getProperty("machine_gcode_flavor", "value") == "UltiGCode" or not container_stack.getMetaDataEntry("supports_usb_connection"):
+
-            self._error_message = Message(catalog.i18nc("@info:status",
+        if container_stack.getProperty("machine_gcode_flavor", "value") == "UltiGCode":
-                                                        "Unable to start a new job because the printer does not support usb printing."))
+            self._error_message = Message(catalog.i18nc("@info:status", "This printer does not support USB printing because it uses UltiGCode flavor."))
+            self._error_message.show()
+            return
+        elif not container_stack.getMetaDataEntry("supports_usb_connection"):
+            self._error_message = Message(catalog.i18nc("@info:status", "Unable to start a new job because the printer does not support usb printing."))
             self._error_message.show()
             return
 
@@ -631,3 +645,24 @@ class USBPrinterOutputDevice(PrinterOutputDevice):
         self._update_firmware_thread.daemon = True
 
         self.connect()
+
+    ##  Pre-heats the heated bed of the printer, if it has one.
+    #
+    #   \param temperature The temperature to heat the bed to, in degrees
+    #   Celsius.
+    #   \param duration How long the bed should stay warm, in seconds. This is
+    #   ignored because there is no g-code to set this.
+    @pyqtSlot(float, float)
+    def preheatBed(self, temperature, duration):
+        Logger.log("i", "Pre-heating the bed to %i degrees.", temperature)
+        self._setTargetBedTemperature(temperature)
+        self.preheatBedRemainingTimeChanged.emit()
+
+    ##  Cancels pre-heating the heated bed of the printer.
+    #
+    #   If the bed is not pre-heated, nothing happens.
+    @pyqtSlot()
+    def cancelPreheatBed(self):
+        Logger.log("i", "Cancelling pre-heating of the bed.")
+        self._setTargetBedTemperature(0)
+        self.preheatBedRemainingTimeChanged.emit()

plugins/USBPrinting/USBPrinterOutputDeviceManager.py

@@ -1,4 +1,4 @@
-# Copyright (c) 2015 Ultimaker B.V.
+# Copyright (c) 2017 Ultimaker B.V.
 # Cura is released under the terms of the AGPLv3 or higher.
 
 from UM.Signal import Signal, signalemitter
@@ -79,10 +79,6 @@ class USBPrinterOutputDeviceManager(QObject, OutputDevicePlugin, Extension):
 
     def stop(self):
         self._check_updates = False
-        try:
-            self._update_thread.join()
-        except RuntimeError:
-            pass
 
     def _updateThread(self):
         while self._check_updates:
@@ -258,7 +254,7 @@ class USBPrinterOutputDeviceManager(QObject, OutputDevicePlugin, Extension):
     def getSerialPortList(self, only_list_usb = False):
         base_list = []
         if platform.system() == "Windows":
-            import winreg #@UnresolvedImport
+            import winreg # type: ignore @UnresolvedImport
             try:
                 key = winreg.OpenKey(winreg.HKEY_LOCAL_MACHINE,"HARDWARE\\DEVICEMAP\\SERIALCOMM")
                 i = 0
@@ -271,10 +267,10 @@ class USBPrinterOutputDeviceManager(QObject, OutputDevicePlugin, Extension):
                 pass
         else:
             if only_list_usb:
-                base_list = base_list + glob.glob("/dev/ttyUSB*") + glob.glob("/dev/ttyACM*") + glob.glob("/dev/cu.usb*")
+                base_list = base_list + glob.glob("/dev/ttyUSB*") + glob.glob("/dev/ttyACM*") + glob.glob("/dev/cu.usb*") + glob.glob("/dev/tty.wchusb*") + glob.glob("/dev/cu.wchusb*")
                 base_list = filter(lambda s: "Bluetooth" not in s, base_list) # Filter because mac sometimes puts them in the list
             else:
-                base_list = base_list + glob.glob("/dev/ttyUSB*") + glob.glob("/dev/ttyACM*") + glob.glob("/dev/cu.*") + glob.glob("/dev/tty.usb*") + glob.glob("/dev/rfcomm*") + glob.glob("/dev/serial/by-id/*")
+                base_list = base_list + glob.glob("/dev/ttyUSB*") + glob.glob("/dev/ttyACM*") + glob.glob("/dev/cu.*") + glob.glob("/dev/tty.usb*") + glob.glob("/dev/tty.wchusb*") + glob.glob("/dev/cu.wchusb*") + glob.glob("/dev/rfcomm*") + glob.glob("/dev/serial/by-id/*")
         return list(base_list)
 
-    _instance = None
+    _instance = None    # type: "USBPrinterOutputDeviceManager"

plugins/USBPrinting/avr_isp/stk500v2.py

@@ -7,7 +7,7 @@ import struct
 import sys
 import time
 
-from serial import Serial
+from serial import Serial   # type: ignore
 from serial import SerialException
 from serial import SerialTimeoutException
 from UM.Logger import Logger
@@ -184,7 +184,7 @@ class Stk500v2(ispBase.IspBase):
 
 def portList():
     ret = []
-    import _winreg
+    import _winreg  # type: ignore
     key=_winreg.OpenKey(_winreg.HKEY_LOCAL_MACHINE,"HARDWARE\\DEVICEMAP\\SERIALCOMM") #@UndefinedVariable
     i=0
     while True:

plugins/UltimakerMachineActions/UMOUpgradeSelection.py

@@ -1,3 +1,8 @@
+# Copyright (c) 2017 Ultimaker B.V.
+# Uranium is released under the terms of the AGPLv3 or higher.
+
+from UM.Settings.ContainerRegistry import ContainerRegistry
+from UM.Settings.InstanceContainer import InstanceContainer
 from cura.MachineAction import MachineAction
 from PyQt5.QtCore import pyqtSlot, pyqtSignal, pyqtProperty
 
@@ -40,12 +45,12 @@ class UMOUpgradeSelection(MachineAction):
 
     def _createDefinitionChangesContainer(self, global_container_stack):
         # Create a definition_changes container to store the settings in and add it to the stack
-        definition_changes_container = UM.Settings.InstanceContainer(global_container_stack.getName() + "_settings")
+        definition_changes_container = UM.Settings.InstanceContainer.InstanceContainer(global_container_stack.getName() + "_settings")
         definition = global_container_stack.getBottom()
         definition_changes_container.setDefinition(definition)
         definition_changes_container.addMetaDataEntry("type", "definition_changes")
 
-        UM.Settings.ContainerRegistry.getInstance().addContainer(definition_changes_container)
+        UM.Settings.ContainerRegistry.ContainerRegistry.getInstance().addContainer(definition_changes_container)
         # Insert definition_changes between the definition and the variant
         global_container_stack.insertContainer(-1, definition_changes_container)
 

plugins/UltimakerMachineActions/UpgradeFirmwareMachineAction.py

@@ -1,18 +1,19 @@
+from UM.Application import Application
+from UM.Settings.DefinitionContainer import DefinitionContainer
 from cura.MachineAction import MachineAction
 from UM.i18n import i18nCatalog
-import cura.Settings.CuraContainerRegistry
+from UM.Settings.ContainerRegistry import ContainerRegistry
-import UM.Settings.DefinitionContainer
-catalog = i18nCatalog("cura")
 
+catalog = i18nCatalog("cura")
 
 ##  Upgrade the firmware of a machine by USB with this action.
 class UpgradeFirmwareMachineAction(MachineAction):
     def __init__(self):
         super().__init__("UpgradeFirmware", catalog.i18nc("@action", "Upgrade Firmware"))
         self._qml_url = "UpgradeFirmwareMachineAction.qml"
-        cura.Settings.CuraContainerRegistry.getInstance().containerAdded.connect(self._onContainerAdded)
+        ContainerRegistry.getInstance().containerAdded.connect(self._onContainerAdded)
 
     def _onContainerAdded(self, container):
         # Add this action as a supported action to all machine definitions if they support USB connection
-        if isinstance(container, UM.Settings.DefinitionContainer) and container.getMetaDataEntry("type") == "machine" and container.getMetaDataEntry("supports_usb_connection"):
+        if isinstance(container, DefinitionContainer) and container.getMetaDataEntry("type") == "machine" and container.getMetaDataEntry("supports_usb_connection"):
-            UM.Application.getInstance().getMachineActionManager().addSupportedAction(container.getId(), self.getKey())
+            Application.getInstance().getMachineActionManager().addSupportedAction(container.getId(), self.getKey())

plugins/VersionUpgrade/VersionUpgrade21to22/MachineInstance.py

@@ -3,7 +3,7 @@
 
 import UM.VersionUpgrade #To indicate that a file is of incorrect format.
 import UM.VersionUpgradeManager #To schedule more files to be upgraded.
-import UM.Resources #To get the config storage path.
+from UM.Resources import Resources #To get the config storage path.
 
 import configparser #To read config files.
 import io #To write config files to strings as if they were files.
@@ -107,7 +107,7 @@ class MachineInstance:
         user_profile["values"] = {}
 
         version_upgrade_manager = UM.VersionUpgradeManager.VersionUpgradeManager.getInstance()
-        user_storage = os.path.join(UM.Resources.getDataStoragePath(), next(iter(version_upgrade_manager.getStoragePaths("user"))))
+        user_storage = os.path.join(Resources.getDataStoragePath(), next(iter(version_upgrade_manager.getStoragePaths("user"))))
         user_profile_file = os.path.join(user_storage, urllib.parse.quote_plus(self._name) + "_current_settings.inst.cfg")
         if not os.path.exists(user_storage):
             os.makedirs(user_storage)

plugins/VersionUpgrade/VersionUpgrade21to22/Profile.py

@@ -3,6 +3,8 @@
 
 import configparser #To read config files.
 import io #To write config files to strings as if they were files.
+from typing import Dict
+from typing import List
 
 import UM.VersionUpgrade
 from UM.Logger import Logger
@@ -26,7 +28,7 @@ class Profile:
     #
     #   \param serialised A string with the contents of a profile.
     #   \param filename The supposed filename of the profile, without extension.
-    def __init__(self, serialised, filename):
+    def __init__(self, serialised: str, filename: str) -> None:
         self._filename = filename
 
         parser = configparser.ConfigParser(interpolation = None)
@@ -58,17 +60,17 @@ class Profile:
             self._material_name = None
 
         # Parse the settings.
-        self._settings = {}
+        self._settings = {} # type: Dict[str,str]
         if parser.has_section("settings"):
             for key, value in parser["settings"].items():
                 self._settings[key] = value
 
         # Parse the defaults and the disabled defaults.
-        self._changed_settings_defaults = {}
+        self._changed_settings_defaults = {}    # type: Dict[str,str]
         if parser.has_section("defaults"):
             for key, value in parser["defaults"].items():
                 self._changed_settings_defaults[key] = value
-        self._disabled_settings_defaults = []
+        self._disabled_settings_defaults = []   # type: List[str]
         if parser.has_section("disabled_defaults"):
             disabled_defaults_string = parser.get("disabled_defaults", "values")
             self._disabled_settings_defaults = [item for item in disabled_defaults_string.split(",") if item != ""] # Split by comma.

plugins/VersionUpgrade/VersionUpgrade22to24/VersionUpgrade.py

@@ -6,7 +6,7 @@ import os
 import os.path
 import io
 
-from UM import Resources
+from UM.Resources import Resources
 from UM.VersionUpgrade import VersionUpgrade # Superclass of the plugin.
 import UM.VersionUpgrade
 

plugins/X3DReader/X3DReader.py

@@ -13,8 +13,10 @@ from UM.Mesh.MeshBuilder import MeshBuilder
 from UM.Mesh.MeshReader import MeshReader
 from UM.Scene.SceneNode import SceneNode
 
+MYPY = False
 try:
-    import xml.etree.cElementTree as ET
+    if not MYPY:
+        import xml.etree.cElementTree as ET
 except ImportError:
     import xml.etree.ElementTree as ET
     

plugins/XRayView/xray.shader

@@ -17,6 +17,28 @@ fragment =
         gl_FragColor = u_color;
     }
 
+vertex41core =
+    #version 410
+    uniform highp mat4 u_modelViewProjectionMatrix;
+
+    in highp vec4 a_vertex;
+
+    void main()
+    {
+        gl_Position = u_modelViewProjectionMatrix * a_vertex;
+    }
+
+fragment41core =
+    #version 410
+    uniform lowp vec4 u_color;
+
+    out vec4 frag_color;
+
+    void main()
+    {
+        frag_color = u_color;
+    }
+
 [defaults]
 u_color = [0.02, 0.02, 0.02, 1.0]
 

plugins/XRayView/xray_composite.shader

@@ -67,6 +67,77 @@ fragment =
         }
     }
 
+vertex41core =
+    #version 410
+    uniform highp mat4 u_modelViewProjectionMatrix;
+    in highp vec4 a_vertex;
+    in highp vec2 a_uvs;
+
+    out highp vec2 v_uvs;
+
+    void main()
+    {
+        gl_Position = u_modelViewProjectionMatrix * a_vertex;
+        v_uvs = a_uvs;
+    }
+
+fragment41core =
+    #version 410
+    uniform sampler2D u_layer0;
+    uniform sampler2D u_layer1;
+    uniform sampler2D u_layer2;
+
+    uniform vec2 u_offset[9];
+
+    uniform float u_outline_strength;
+    uniform vec4 u_outline_color;
+    uniform vec4 u_error_color;
+    uniform vec4 u_background_color;
+
+    const vec3 x_axis = vec3(1.0, 0.0, 0.0);
+    const vec3 y_axis = vec3(0.0, 1.0, 0.0);
+    const vec3 z_axis = vec3(0.0, 0.0, 1.0);
+
+    in vec2 v_uvs;
+    out vec4 frag_color;
+
+    float kernel[9];
+
+    void main()
+    {
+        kernel[0] = 0.0; kernel[1] = 1.0; kernel[2] = 0.0;
+        kernel[3] = 1.0; kernel[4] = -4.0; kernel[5] = 1.0;
+        kernel[6] = 0.0; kernel[7] = 1.0; kernel[8] = 0.0;
+
+        vec4 result = u_background_color;
+        vec4 layer0 = texture(u_layer0, v_uvs);
+
+        result = layer0 * layer0.a + result * (1.0 - layer0.a);
+
+        float intersection_count = (texture(u_layer2, v_uvs).r * 255.0) / 5.0;
+        if(mod(intersection_count, 2.0) == 1.0)
+        {
+            result = u_error_color;
+        }
+
+        vec4 sum = vec4(0.0);
+        for (int i = 0; i < 9; i++)
+        {
+            vec4 color = vec4(texture(u_layer1, v_uvs.xy + u_offset[i]).a);
+            sum += color * (kernel[i] / u_outline_strength);
+        }
+
+        vec4 layer1 = texture(u_layer1, v_uvs);
+        if((layer1.rgb == x_axis || layer1.rgb == y_axis || layer1.rgb == z_axis))
+        {
+            frag_color = result;
+        }
+        else
+        {
+            frag_color = mix(result, vec4(abs(sum.a)) * u_outline_color, abs(sum.a));
+        }
+    }
+
 [defaults]
 u_layer0 = 0
 u_layer1 = 1

plugins/XmlMaterialProfile/XmlMaterialProfile.py

@@ -1,11 +1,9 @@
-# Copyright (c) 2016 Ultimaker B.V.
+# Copyright (c) 2017 Ultimaker B.V.
 # Cura is released under the terms of the AGPLv3 or higher.
 
-import math
 import copy
 import io
 import xml.etree.ElementTree as ET
-import uuid
 
 from UM.Resources import Resources
 from UM.Logger import Logger
@@ -13,11 +11,11 @@ from UM.Util import parseBool
 from cura.CuraApplication import CuraApplication
 
 import UM.Dictionary
-
+from UM.Settings.InstanceContainer import InstanceContainer
-import UM.Settings
+from UM.Settings.ContainerRegistry import ContainerRegistry
 
 ##  Handles serializing and deserializing material containers from an XML file
-class XmlMaterialProfile(UM.Settings.InstanceContainer):
+class XmlMaterialProfile(InstanceContainer):
     def __init__(self, container_id, *args, **kwargs):
         super().__init__(container_id, *args, **kwargs)
         self._inherited_files = []
@@ -30,7 +28,7 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
         super().setReadOnly(read_only)
 
         basefile = self.getMetaDataEntry("base_file", self._id)  # if basefile is self.id, this is a basefile.
-        for container in UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(base_file = basefile):
+        for container in ContainerRegistry.getInstance().findInstanceContainers(base_file = basefile):
             container._read_only = read_only  # prevent loop instead of calling setReadOnly
 
     ##  Overridden from InstanceContainer
@@ -46,7 +44,7 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
 
         basefile = self.getMetaDataEntry("base_file", self._id)  #if basefile is self.id, this is a basefile.
         # Update all containers that share GUID and basefile
-        for container in UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(base_file = basefile):
+        for container in ContainerRegistry.getInstance().findInstanceContainers(base_file = basefile):
             container.setMetaDataEntry(key, value)
 
     ##  Overridden from InstanceContainer, similar to setMetaDataEntry.
@@ -65,7 +63,7 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
         basefile = self.getMetaDataEntry("base_file", self._id)  # if basefile is self.id, this is a basefile.
         # Update the basefile as well, this is actually what we're trying to do
         # Update all containers that share GUID and basefile
-        containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(base_file = basefile)
+        containers = ContainerRegistry.getInstance().findInstanceContainers(base_file = basefile)
         for container in containers:
             container.setName(new_name)
 
@@ -74,7 +72,7 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
         super().setDirty(dirty)
         base_file = self.getMetaDataEntry("base_file", None)
         if base_file is not None and base_file != self._id:
-            containers = UM.Settings.ContainerRegistry.getInstance().findContainers(id=base_file)
+            containers = ContainerRegistry.getInstance().findContainers(id=base_file)
             if containers:
                 base_container = containers[0]
                 if not base_container.isReadOnly():
@@ -88,7 +86,7 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
     #     super().setProperty(key, property_name, property_value)
     #
     #     basefile = self.getMetaDataEntry("base_file", self._id)  #if basefile is self.id, this is a basefile.
-    #     for container in UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(base_file = basefile):
+    #     for container in UM.Settings.ContainerRegistry.ContainerRegistry.getInstance().findInstanceContainers(base_file = basefile):
     #         if not container.isReadOnly():
     #             container.setDirty(True)
 
@@ -96,7 +94,7 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
     # base file: global settings + supported machines
     # machine / variant combination: only changes for itself.
     def serialize(self):
-        registry = UM.Settings.ContainerRegistry.getInstance()
+        registry = ContainerRegistry.getInstance()
 
         base_file = self.getMetaDataEntry("base_file", "")
         if base_file and self.id != base_file:
@@ -376,12 +374,10 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
 
         # Reset previous metadata
         self.clearData() # Ensure any previous data is gone.
-
+        meta_data = {}
-        self.addMetaDataEntry("type", "material")
+        meta_data["type"] = "material"
-        self.addMetaDataEntry("base_file", self.id)
+        meta_data["base_file"] = self.id
-
+        meta_data["status"] = "unknown"  # TODO: Add material verfication
-        # TODO: Add material verfication
-        self.addMetaDataEntry("status", "unknown")
 
         inherits = data.find("./um:inherits", self.__namespaces)
         if inherits is not None:
@@ -399,23 +395,20 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
                 label = entry.find("./um:label", self.__namespaces)
 
                 if label is not None:
-                    self.setName(label.text)
+                    self._name = label.text
                 else:
-                    self.setName(self._profile_name(material.text, color.text))
+                    self._name = self._profile_name(material.text, color.text)
-
+                meta_data["brand"] = brand.text
-                self.addMetaDataEntry("brand", brand.text)
+                meta_data["material"] = material.text
-                self.addMetaDataEntry("material", material.text)
+                meta_data["color_name"] = color.text
-                self.addMetaDataEntry("color_name", color.text)
-
                 continue
+            meta_data[tag_name] = entry.text
 
-            self.addMetaDataEntry(tag_name, entry.text)
+        if not "description" in meta_data:
+            meta_data["description"] = ""
 
-        if not "description" in self.getMetaData():
+        if not "adhesion_info" in meta_data:
-            self.addMetaDataEntry("description", "")
+            meta_data["adhesion_info"] = ""
-
-        if not "adhesion_info" in self.getMetaData():
-            self.addMetaDataEntry("adhesion_info", "")
 
         property_values = {}
         properties = data.iterfind("./um:properties/*", self.__namespaces)
@@ -425,10 +418,9 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
 
         diameter = float(property_values.get("diameter", 2.85)) # In mm
         density = float(property_values.get("density", 1.3)) # In g/cm3
+        meta_data["properties"] = property_values
 
-        self.addMetaDataEntry("properties", property_values)
+        self.setDefinition(ContainerRegistry.getInstance().findDefinitionContainers(id = "fdmprinter")[0])
-
-        self.setDefinition(UM.Settings.ContainerRegistry.getInstance().findDefinitionContainers(id = "fdmprinter")[0])
 
         global_compatibility = True
         global_setting_values = {}
@@ -436,16 +428,16 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
         for entry in settings:
             key = entry.get("key")
             if key in self.__material_property_setting_map:
-                self.setProperty(self.__material_property_setting_map[key], "value", entry.text)
                 global_setting_values[self.__material_property_setting_map[key]] = entry.text
             elif key in self.__unmapped_settings:
                 if key == "hardware compatible":
                     global_compatibility = parseBool(entry.text)
             else:
                 Logger.log("d", "Unsupported material setting %s", key)
+        self._cached_values = global_setting_values
 
-        self.addMetaDataEntry("compatible", global_compatibility)
+        meta_data["compatible"] = global_compatibility
-
+        self.setMetaData(meta_data)
         self._dirty = False
 
         machines = data.iterfind("./um:settings/um:machine", self.__namespaces)
@@ -463,6 +455,9 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
                 else:
                     Logger.log("d", "Unsupported material setting %s", key)
 
+            cached_machine_setting_properties = global_setting_values.copy()
+            cached_machine_setting_properties.update(machine_setting_values)
+
             identifiers = machine.iterfind("./um:machine_identifier", self.__namespaces)
             for identifier in identifiers:
                 machine_id = self.__product_id_map.get(identifier.get("product"), None)
@@ -470,7 +465,7 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
                     # Lets try again with some naive heuristics.
                     machine_id = identifier.get("product").replace(" ", "").lower()
 
-                definitions = UM.Settings.ContainerRegistry.getInstance().findDefinitionContainers(id = machine_id)
+                definitions = ContainerRegistry.getInstance().findDefinitionContainers(id = machine_id)
                 if not definitions:
                     Logger.log("w", "No definition found for machine ID %s", machine_id)
                     continue
@@ -480,29 +475,20 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
                 if machine_compatibility:
                     new_material_id = self.id + "_" + machine_id
 
-                    # It could be that we are overwriting, so check if the ID already exists.
+                    new_material = XmlMaterialProfile(new_material_id)
-                    materials = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(id=new_material_id)
-                    if materials:
-                        new_material = materials[0]
-                        new_material.clearData()
-                    else:
-                        new_material = XmlMaterialProfile(new_material_id)
 
-                    new_material.setName(self.getName())
+                    # Update the private directly, as we want to prevent the lookup that is done when using setName
+                    new_material._name = self.getName()
                     new_material.setMetaData(copy.deepcopy(self.getMetaData()))
                     new_material.setDefinition(definition)
                     # Don't use setMetadata, as that overrides it for all materials with same base file
                     new_material.getMetaData()["compatible"] = machine_compatibility
 
-                    for key, value in global_setting_values.items():
+                    new_material.setCachedValues(cached_machine_setting_properties)
-                        new_material.setProperty(key, "value", value)
-
-                    for key, value in machine_setting_values.items():
-                        new_material.setProperty(key, "value", value)
 
                     new_material._dirty = False
-                    if not materials:
+
-                        UM.Settings.ContainerRegistry.getInstance().addContainer(new_material)
+                    ContainerRegistry.getInstance().addContainer(new_material)
 
                 hotends = machine.iterfind("./um:hotend", self.__namespaces)
                 for hotend in hotends:
@@ -510,10 +496,10 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
                     if hotend_id is None:
                         continue
 
-                    variant_containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(id = hotend_id)
+                    variant_containers = ContainerRegistry.getInstance().findInstanceContainers(id = hotend_id)
                     if not variant_containers:
                         # It is not really properly defined what "ID" is so also search for variants by name.
-                        variant_containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(definition = definition.id, name = hotend_id)
+                        variant_containers = ContainerRegistry.getInstance().findInstanceContainers(definition = definition.id, name = hotend_id)
 
                     if not variant_containers:
                         Logger.log("d", "No variants found with ID or name %s for machine %s", hotend_id, definition.id)
@@ -532,34 +518,26 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
                         else:
                             Logger.log("d", "Unsupported material setting %s", key)
 
-                    # It could be that we are overwriting, so check if the ID already exists.
                     new_hotend_id = self.id + "_" + machine_id + "_" + hotend_id.replace(" ", "_")
-                    materials = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(id=new_hotend_id)
-                    if materials:
-                        new_hotend_material = materials[0]
-                        new_hotend_material.clearData()
-                    else:
-                        new_hotend_material = XmlMaterialProfile(new_hotend_id)
 
-                    new_hotend_material.setName(self.getName())
+                    new_hotend_material = XmlMaterialProfile(new_hotend_id)
+
+                    # Update the private directly, as we want to prevent the lookup that is done when using setName
+                    new_hotend_material._name = self.getName()
                     new_hotend_material.setMetaData(copy.deepcopy(self.getMetaData()))
                     new_hotend_material.setDefinition(definition)
                     new_hotend_material.addMetaDataEntry("variant", variant_containers[0].id)
                     # Don't use setMetadata, as that overrides it for all materials with same base file
                     new_hotend_material.getMetaData()["compatible"] = hotend_compatibility
 
-                    for key, value in global_setting_values.items():
+                    cached_hotend_setting_properties = cached_machine_setting_properties.copy()
-                        new_hotend_material.setProperty(key, "value", value)
+                    cached_hotend_setting_properties.update(hotend_setting_values)
 
-                    for key, value in machine_setting_values.items():
+                    new_hotend_material.setCachedValues(cached_hotend_setting_properties)
-                        new_hotend_material.setProperty(key, "value", value)
-
-                    for key, value in hotend_setting_values.items():
-                        new_hotend_material.setProperty(key, "value", value)
 
                     new_hotend_material._dirty = False
-                    if not materials:  # It was not added yet, do so now.
+
-                        UM.Settings.ContainerRegistry.getInstance().addContainer(new_hotend_material)
+                    ContainerRegistry.getInstance().addContainer(new_hotend_material)
 
     def _addSettingElement(self, builder, instance):
         try:

resources/definitions/abax_pri3.def.json

@@ -0,0 +1,84 @@
+{
+    "id": "PRi3",
+    "name": "ABAX PRi3",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "ABAX 3d Technologies",
+        "manufacturer": "ABAX 3d Technologies",
+        "category": "Other",
+        "file_formats": "text/x-gcode"
+    },
+    "overrides": {
+        "machine_start_gcode": {
+            "default_value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z5.0 F200          ;move Z to position 5.0 mm\nG92 E0                  ;zero the extruded length\n; -- end of START GCODE --"
+        },
+        "machine_end_gcode": {
+            "default_value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nM140 S0  ;set temp of bed to Zero  \nG91                     ;set to relative positioning\nG1 E-10 F300            ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y215                 ;move X to min and Y to max \nG90                     ;set to absolute positioning\nM84                     ;turn off steppers\n; -- end of END GCODE --"
+        },
+        "machine_width": {
+            "default_value": 225
+        },
+        "machine_depth": {
+            "default_value": 220
+        },
+        "machine_height": {
+            "default_value": 200
+        },
+        "machine_heated_bed": {
+            "default_value": false
+        },
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap"
+        },
+        "layer_height": {
+            "default_value": 0.2
+        },
+        "layer_height_0": {
+            "default_value": 0.2
+        },
+        "wall_thickness": {
+            "default_value": 1
+        },
+        "top_bottom_thickness": {
+            "default_value": 1
+        },
+        "bottom_thickness": {
+            "default_value": 1
+        },
+        "material_print_temperature": {
+            "default_value": 200
+        },
+        "material_bed_temperature": {
+            "default_value": 0
+        },
+        "material_diameter": {
+            "default_value": 1.75
+        },
+        "speed_print": {
+            "default_value": 40
+        },
+        "speed_infill": {
+            "default_value": 70
+        },
+        "speed_wall": {
+            "default_value": 25
+        },
+        "speed_topbottom": {
+            "default_value": 15
+        },
+        "speed_travel": {
+            "default_value": 150
+        },
+        "speed_layer_0": {
+            "default_value": 30
+        },
+        "support_enable": {
+            "default_value": true
+        }
+    }
+}

resources/definitions/abax_pri5.def.json

@@ -0,0 +1,84 @@
+{
+    "id": "PRi5",
+    "name": "ABAX PRi5",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "ABAX 3d Technologies",
+        "manufacturer": "ABAX 3d Technologies",
+        "category": "Other",
+        "file_formats": "text/x-gcode"
+    },
+    "overrides": {
+        "machine_start_gcode": {
+            "default_value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z5.0 F200          ;move Z to position 5.0 mm\nG92 E0                  ;zero the extruded length\n; -- end of START GCODE --"
+        },
+        "machine_end_gcode": {
+            "default_value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nM140 S0  ;set temp of bed to Zero  \nG91                     ;set to relative positioning\nG1 E-10 F300            ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y300                 ;move X to min and Y to max \nG90                     ;set to absolute positioning\nM84                     ;turn off steppers\n; -- end of END GCODE --"
+        },
+        "machine_width": {
+            "default_value": 310
+        },
+        "machine_depth": {
+            "default_value": 310
+        },
+        "machine_height": {
+            "default_value": 300
+        },
+        "machine_heated_bed": {
+            "default_value": false
+        },
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap"
+        },
+        "layer_height": {
+            "default_value": 0.2
+        },
+        "layer_height_0": {
+            "default_value": 0.2
+        },
+        "wall_thickness": {
+            "default_value": 1
+        },
+        "top_bottom_thickness": {
+            "default_value": 1
+        },
+        "bottom_thickness": {
+            "default_value": 1
+        },
+        "material_print_temperature": {
+            "default_value": 200
+        },
+        "material_bed_temperature": {
+            "default_value": 0
+        },
+        "material_diameter": {
+            "default_value": 1.75
+        },
+        "speed_print": {
+            "default_value": 40
+        },
+        "speed_infill": {
+            "default_value": 70
+        },
+        "speed_wall": {
+            "default_value": 25
+        },
+        "speed_topbottom": {
+            "default_value": 15
+        },
+        "speed_travel": {
+            "default_value": 150
+        },
+        "speed_layer_0": {
+            "default_value": 30
+        },
+        "support_enable": {
+            "default_value": true
+        }
+    }
+}

resources/definitions/abax_titan.def.json

@@ -0,0 +1,84 @@
+{
+    "id": "Titan",
+    "name": "ABAX Titan",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "ABAX 3d Technologies",
+        "manufacturer": "ABAX 3d Technologies",
+        "category": "Other",
+        "file_formats": "text/x-gcode"
+    },
+    "overrides": {
+        "machine_start_gcode": {
+            "default_value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z5.0 F200          ;move Z to position 5.0 mm\nG92 E0                  ;zero the extruded length\n; -- end of START GCODE --"
+        },
+        "machine_end_gcode": {
+            "default_value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nM140 S0  ;set temp of bed to Zero  \nG91                     ;set to relative positioning\nG1 E-10 F300            ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y300                 ;move X to min and Y to max \nG90                     ;set to absolute positioning\nM84                     ;turn off steppers\n; -- end of END GCODE --"
+        },
+        "machine_width": {
+            "default_value": 310
+        },
+        "machine_depth": {
+            "default_value": 310
+        },
+        "machine_height": {
+            "default_value": 300
+        },
+        "machine_heated_bed": {
+            "default_value": false
+        },
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap"
+        },
+        "layer_height": {
+            "default_value": 0.2
+        },
+        "layer_height_0": {
+            "default_value": 0.2
+        },
+        "wall_thickness": {
+            "default_value": 1
+        },
+        "top_bottom_thickness": {
+            "default_value": 1
+        },
+        "bottom_thickness": {
+            "default_value": 1
+        },
+        "material_print_temperature": {
+            "default_value": 200
+        },
+        "material_bed_temperature": {
+            "default_value": 0
+        },
+        "material_diameter": {
+            "default_value": 1.75
+        },
+        "speed_print": {
+            "default_value": 40
+        },
+        "speed_infill": {
+            "default_value": 70
+        },
+        "speed_wall": {
+            "default_value": 25
+        },
+        "speed_topbottom": {
+            "default_value": 15
+        },
+        "speed_travel": {
+            "default_value": 150
+        },
+        "speed_layer_0": {
+            "default_value": 30
+        },
+        "support_enable": {
+            "default_value": true
+        }
+    }
+}

resources/definitions/cartesio.def.json

@@ -9,7 +9,6 @@
         "manufacturer": "Cartesio bv",
         "category": "Other",
         "file_formats": "text/x-gcode",
-        "has_materials": true,
         "has_machine_materials": true,
         "has_variants": true,
         "variants_name": "Nozzle size",
@@ -31,12 +30,11 @@
         "machine_heated_bed": { "default_value": true },
         "machine_center_is_zero": { "default_value": false },
         "machine_height": { "default_value": 400 },
-        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
         "machine_depth": { "default_value": 270 },
         "machine_width": { "default_value": 430 },
-        "machine_name": { "default_value": "Cartesio" },
+        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
         "machine_start_gcode": {
-            "default_value": "M92 E162\nG21\nG90\nM42 S255 P13;chamber lights\nM42 S255 P12;fume extraction\nM140 S{material_bed_temperature}\n\nM117 Homing Y ......\nG28 Y\nM117 Homing X ......\nG28 X\nM117 Homing Z ......\nG28 Z F100\nG1 Z10 F600\nG1 X70 Y20 F9000;go to wipe point\n\nM190 S{material_bed_temperature}\nM104 S120 T1\nM109 S{material_print_temperature} T0\nM104 S21 T1\n\nM117 purging nozzle....\n\nT0\nG92 E0;set E\nG1 E10 F100\nG92 E0\nG1 E-{retraction_amount} F600\nG92 E0\n\nM117 wiping nozzle....\n\nG1 X1 Y24 F3000\nG1 X70 F9000\n\nM117 Printing .....\n\nG1 E1 F100\nG92 E-1\n"
+            "default_value": "M92 E159\nG21\nG90\nM42 S255 P13;chamber lights\nM42 S255 P12;fume extraction\nM140 S{material_bed_temperature}\n\nM117 Homing Y ......\nG28 Y\nM117 Homing X ......\nG28 X\nM117 Homing Z ......\nG28 Z F100\nG1 Z10 F600\nG1 X70 Y20 F9000;go to wipe point\n\nM190 S{material_bed_temperature}\nM104 S120 T1\nM109 S{material_print_temperature} T0\nM104 S21 T1\n\nM117 purging nozzle....\n\nT0\nG92 E0;set E\nG1 E10 F100\nG92 E0\nG1 E-{retraction_amount} F600\nG92 E0\n\nM117 wiping nozzle....\n\nG1 X1 Y24 F3000\nG1 X70 F9000\n\nM117 Printing .....\n\nG1 E1 F100\nG92 E-1\n"
         },
         "machine_end_gcode": {
             "default_value": "; -- END GCODE --\nM106 S255\nM140 S5\nM104 S5 T0\nM104 S5 T1\nG1 X20.0 Y260.0 F6000\nG4 S7\nM84\nG4 S90\nM107\nM42 P12 S0\nM42 P13 S0\nM84\n; -- end of END GCODE --"

resources/definitions/fdmprinter.def.json

@@ -219,8 +219,11 @@
                 {
                     "label": "Nozzle angle",
                     "description": "The angle between the horizontal plane and the conical part right above the tip of the nozzle.",
-                    "default_value": 45,
+                    "unit": "°",
                     "type": "int",
+                    "default_value": 45,
+                    "maximum_value": "89",
+                    "minimum_value": "1",
                     "settable_per_mesh": false,
                     "settable_per_extruder": false,
                     "settable_per_meshgroup": false
@@ -615,7 +618,7 @@
                     "label": "Line Width",
                     "description": "Width of a single line. Generally, the width of each line should correspond to the width of the nozzle. However, slightly reducing this value could produce better prints.",
                     "unit": "mm",
-                    "minimum_value": "0.0001",
+                    "minimum_value": "0.001",
                     "minimum_value_warning": "0.5 * machine_nozzle_size",
                     "maximum_value_warning": "2 * machine_nozzle_size",
                     "default_value": 0.4,
@@ -629,7 +632,7 @@
                             "label": "Wall Line Width",
                             "description": "Width of a single wall line.",
                             "unit": "mm",
-                            "minimum_value": "0.0001",
+                            "minimum_value": "0.001",
                             "minimum_value_warning": "0.75 * machine_nozzle_size",
                             "maximum_value_warning": "2 * machine_nozzle_size",
                             "value": "line_width",
@@ -643,7 +646,7 @@
                                     "label": "Outer Wall Line Width",
                                     "description": "Width of the outermost wall line. By lowering this value, higher levels of detail can be printed.",
                                     "unit": "mm",
-                                    "minimum_value": "0.0001",
+                                    "minimum_value": "0.001",
                                     "minimum_value_warning": "0.75 * machine_nozzle_size if outer_inset_first else 0.1 * machine_nozzle_size",
                                     "maximum_value_warning": "2 * machine_nozzle_size",
                                     "default_value": 0.4,
@@ -656,7 +659,7 @@
                                     "label": "Inner Wall(s) Line Width",
                                     "description": "Width of a single wall line for all wall lines except the outermost one.",
                                     "unit": "mm",
-                                    "minimum_value": "0.0001",
+                                    "minimum_value": "0.001",
                                     "minimum_value_warning": "0.5 * machine_nozzle_size",
                                     "maximum_value_warning": "2 * machine_nozzle_size",
                                     "default_value": 0.4,
@@ -671,7 +674,7 @@
                             "label": "Top/Bottom Line Width",
                             "description": "Width of a single top/bottom line.",
                             "unit": "mm",
-                            "minimum_value": "0.0001",
+                            "minimum_value": "0.001",
                             "minimum_value_warning": "0.1 * machine_nozzle_size",
                             "maximum_value_warning": "2 * machine_nozzle_size",
                             "default_value": 0.4,
@@ -684,7 +687,7 @@
                             "label": "Infill Line Width",
                             "description": "Width of a single infill line.",
                             "unit": "mm",
-                            "minimum_value": "0.0001",
+                            "minimum_value": "0.001",
                             "minimum_value_warning": "0.75 * machine_nozzle_size",
                             "maximum_value_warning": "3 * machine_nozzle_size",
                             "default_value": 0.4,
@@ -698,7 +701,7 @@
                             "label": "Skirt/Brim Line Width",
                             "description": "Width of a single skirt or brim line.",
                             "unit": "mm",
-                            "minimum_value": "0.0001",
+                            "minimum_value": "0.001",
                             "minimum_value_warning": "0.75 * machine_nozzle_size",
                             "maximum_value_warning": "3 * machine_nozzle_size",
                             "default_value": 0.4,
@@ -713,7 +716,7 @@
                             "label": "Support Line Width",
                             "description": "Width of a single support structure line.",
                             "unit": "mm",
-                            "minimum_value": "0.0001",
+                            "minimum_value": "0.001",
                             "minimum_value_warning": "0.75 * machine_nozzle_size",
                             "maximum_value_warning": "3 * machine_nozzle_size",
                             "default_value": 0.4,
@@ -730,7 +733,7 @@
                             "description": "Width of a single support interface line.",
                             "unit": "mm",
                             "default_value": 0.4,
-                            "minimum_value": "0.0001",
+                            "minimum_value": "0.001",
                             "minimum_value_warning": "0.4 * machine_nozzle_size",
                             "maximum_value_warning": "2 * machine_nozzle_size",
                             "type": "float",
@@ -749,7 +752,7 @@
                             "enabled": "resolveOrValue('prime_tower_enable')",
                             "default_value": 0.4,
                             "value": "line_width",
-                            "minimum_value": "0.0001",
+                            "minimum_value": "0.001",
                             "minimum_value_warning": "0.75 * machine_nozzle_size",
                             "maximum_value_warning": "2 * machine_nozzle_size",
                             "settable_per_mesh": false,
@@ -1330,14 +1333,14 @@
                 "material_print_temperature":
                 {
                     "label": "Printing Temperature",
-                    "description": "The temperature used for printing. Set at 0 to pre-heat the printer manually.",
+                    "description": "The temperature used for printing. If this is 0, the extruder will not heat up for this print.",
                     "unit": "°C",
                     "type": "float",
                     "default_value": 210,
                     "value": "default_material_print_temperature",
                     "minimum_value": "-273.15",
                     "minimum_value_warning": "0",
-                    "maximum_value_warning": "260",
+                    "maximum_value_warning": "270",
                     "enabled": "not (material_flow_dependent_temperature) and machine_gcode_flavor != \"UltiGCode\"",
                     "settable_per_mesh": false,
                     "settable_per_extruder": true
@@ -1349,10 +1352,10 @@
                     "unit": "°C",
                     "type": "float",
                     "default_value": 215,
-                    "value": "material_print_temperature + 5",
+                    "value": "material_print_temperature",
                     "minimum_value": "-273.15",
                     "minimum_value_warning": "0",
-                    "maximum_value_warning": "260",
+                    "maximum_value_warning": "270",
                     "enabled": "machine_gcode_flavor != \"UltiGCode\"",
                     "settable_per_mesh": false,
                     "settable_per_extruder": true
@@ -1417,7 +1420,7 @@
                 "material_bed_temperature":
                 {
                     "label": "Build Plate Temperature",
-                    "description": "The temperature used for the heated build plate. Set at 0 to pre-heat the printer manually.",
+                    "description": "The temperature used for the heated build plate. If this is 0, the bed will not heat up for this print.",
                     "unit": "°C",
                     "type": "float",
                     "resolve": "max(extruderValues('material_bed_temperature'))",
@@ -3402,7 +3405,7 @@
                     "type": "float",
                     "default_value": 0.4,
                     "value": "line_width",
-                    "minimum_value": "0.0001",
+                    "minimum_value": "0.001",
                     "minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 0.1",
                     "maximum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 2",
                     "enabled": "resolveOrValue('adhesion_type') == 'raft'",
@@ -3417,7 +3420,7 @@
                     "unit": "mm",
                     "type": "float",
                     "default_value": 0.4,
-                    "minimum_value": "0.0001",
+                    "minimum_value": "0",
                     "minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'raft_surface_line_width')",
                     "maximum_value_warning": "extruderValue(adhesion_extruder_nr, 'raft_surface_line_width') * 3",
                     "enabled": "resolveOrValue('adhesion_type') == 'raft'",
@@ -3450,7 +3453,7 @@
                     "type": "float",
                     "default_value": 0.7,
                     "value": "line_width * 2",
-                    "minimum_value": "0.0001",
+                    "minimum_value": "0.001",
                     "minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 0.5",
                     "maximum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 3",
                     "enabled": "resolveOrValue('adhesion_type') == 'raft'",
@@ -3497,7 +3500,7 @@
                     "unit": "mm",
                     "type": "float",
                     "default_value": 0.8,
-                    "minimum_value": "0.0001",
+                    "minimum_value": "0.001",
                     "value": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 2",
                     "minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 0.5",
                     "maximum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 3",
@@ -3514,7 +3517,7 @@
                     "type": "float",
                     "default_value": 1.6,
                     "value": "raft_base_line_width * 2",
-                    "minimum_value": "0.0001",
+                    "minimum_value": "0",
                     "minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'raft_base_line_width')",
                     "maximum_value_warning": "100",
                     "enabled": "resolveOrValue('adhesion_type') == 'raft'",
@@ -3871,8 +3874,6 @@
                     "default_value": 200,
                     "minimum_value_warning": "-1000",
                     "maximum_value_warning": "1000",
-                    "maximum_value": "machine_depth - resolveOrValue('prime_tower_size')",
-                    "minimum_value": "0",
                     "maximum_value": "machine_depth / 2 - resolveOrValue('prime_tower_size') if machine_center_is_zero else machine_depth - resolveOrValue('prime_tower_size')",
                     "minimum_value": "machine_depth / -2 if machine_center_is_zero else 0",
                     "settable_per_mesh": false,

resources/definitions/folgertech_FT-5.def.json

@@ -0,0 +1,28 @@
+{
+    "version": 2, 
+    "name": "Folger Tech FT-5",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "Jaime van Kessel & Paul Bussiere",
+        "manufacturer": "Folger Tech",
+        "category": "Other",
+        "file_formats": "text/x-gcode",
+        "platform": "FT-5_build_plate.stl"
+    },
+    "overrides": {
+        "machine_heated_bed": { "default_value": true },
+        "machine_width": { "default_value": 300 },
+        "machine_height": { "default_value": 400 },
+        "machine_depth": { "default_value": 300 },
+        "material_diameter": { "default_value": 1.75 },
+        "gantry_height": { "default_value": 55 },
+
+        "machine_start_gcode": {
+            "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
+        },
+        "machine_end_gcode": {
+            "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
+        }
+    }
+}

resources/definitions/helloBEEprusa.def.json

@@ -0,0 +1,50 @@
+{
+    "id": "BEEVERYCREATIVE-helloBEEprusa",
+    "version": 2,
+    "name": "Hello BEE Prusa",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "BEEVERYCREATIVE",
+        "manufacturer": "BEEVERYCREATIVE",
+        "category": "Other",
+        "platform": "BEEVERYCREATIVE-helloBEEprusa.stl",
+        "platform_offset": [-226, -75, -196],
+        "file_formats": "text/x-gcode"
+    },
+
+    "overrides": {
+        "machine_name": { "default_value": "hello BEE prusa" },
+        "machine_start_gcode": { "default_value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM107                    ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG92 E0                  ;zero the extruded length\nG1 F3600                ;set feedrate to 60 mm/sec\n; -- end of START GCODE --" },
+        "machine_end_gcode": { "default_value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nM140 S0                 ;set bed temperature to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nM84                     ;turn off steppers\n; -- end of END GCODE --" },
+        "machine_width": { "default_value": 185 },
+        "machine_depth": { "default_value": 200 },
+        "machine_height": { "default_value": 190 },
+        "machine_heated_bed": { "default_value": true },
+        "machine_center_is_zero": { "default_value": false },
+        "material_print_temperature": { "default_value": 220 },
+        "material_bed_temperature": { "default_value": 60 },
+        "material_diameter": { "default_value": 1.75 },
+        "layer_height": { "default_value": 0.2 },
+        "layer_height_0": { "default_value": 0.2 },
+        "wall_line_count": { "default_value": 3 },
+        "wall_thickness": { "default_value": 1.2 },
+        "top_bottom_thickness": { "default_value": 1.2 },
+        "infill_sparse_density": { "default_value": 20 },
+        "infill_overlap": { "default_value": 15 },
+        "speed_print": { "default_value": 60 },
+        "speed_travel": { "default_value": 160 },
+        "speed_layer_0": { "default_value": 30 },
+        "speed_wall_x": { "default_value": 35 },
+        "speed_wall_0": { "default_value": 30 },
+        "speed_infill": { "default_value": 60 },
+        "speed_topbottom": { "default_value": 20 },
+        "skirt_brim_speed": { "default_value": 35 },
+        "skirt_line_count": { "default_value": 4 },
+        "skirt_brim_minimal_length": { "default_value": 30 },
+        "skirt_gap": { "default_value": 6 },
+        "cool_fan_full_at_height": { "default_value": 0.4 },
+        "retraction_speed": { "default_value": 50.0},
+        "retraction_amount": { "default_value": 5.2}
+    }
+}

resources/definitions/renkforce_rf100.def.json

@@ -0,0 +1,205 @@
+{
+    "id": "RF100",
+    "version": 2,
+    "name": "Renkforce RF100",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "author": "Simon Peter (based on RF100.ini by Conrad Electronic SE)",
+        "category": "Other",
+        "file_formats": "text/x-gcode",
+        "manufacturer": "Renkforce",
+        "visible": true
+    },
+
+    "overrides": {
+        "adhesion_type": {
+            "default_value": "skirt"
+        },
+        "bottom_thickness": {
+            "value": "0.5"
+        },
+        "brim_line_count": {
+            "value": "20.0"
+        },
+        "cool_fan_enabled": {
+            "value": "True"
+        },
+        "cool_fan_full_at_height": {
+            "value": "0.5"
+        },
+        "cool_fan_speed_max": {
+            "value": "100.0"
+        },
+        "cool_fan_speed_min": {
+            "value": "100.0"
+        },
+        "cool_lift_head": {
+            "value": "True"
+        },
+        "cool_min_layer_time": {
+            "value": "5.0"
+        },
+        "cool_min_speed": {
+            "value": "10.0"
+        },
+        "infill_before_walls": {
+            "value": "True"
+        },
+        "infill_overlap": {
+            "value": "15.0"
+        },
+        "layer_0_z_overlap": {
+            "value": "0.22"
+        },
+        "layer_height_0": {
+            "value": "0.3"
+        },
+        "machine_depth": {
+            "value": "100"
+        },
+        "machine_end_gcode": {
+            "default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap (Marlin/Sprinter)"
+        },
+        "machine_height": {
+            "value": "100"
+        },
+        "machine_name": {
+            "default_value": "Renkforce RF100"
+        },
+        "machine_start_gcode": {
+            "default_value": ";Sliced at: {day} {date} {time}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM117 Printing..."
+        },
+        "machine_width": {
+            "value": "100"
+        },
+        "material_bed_temperature": {
+            "visible": "False"
+        },
+        "material_diameter": {
+            "value": "1.75"
+        },
+        "material_print_temperature": {
+            "value": "210.0"
+        },
+        "ooze_shield_enabled": {
+            "value": "True"
+        },
+        "raft_airgap": {
+            "value": "0.22"
+        },
+        "raft_base_line_spacing": {
+            "value": "3.0"
+        },
+        "raft_base_line_width": {
+            "value": "1.0"
+        },
+        "raft_base_thickness": {
+            "value": "0.3"
+        },
+        "raft_interface_line_spacing": {
+            "value": "3.0"
+        },
+        "raft_interface_line_width": {
+            "value": "0.4"
+        },
+        "raft_interface_thickness": {
+            "value": "0.27"
+        },
+        "raft_margin": {
+            "value": "5.0"
+        },
+        "raft_surface_layers": {
+            "value": "2.0"
+        },
+        "raft_surface_line_spacing": {
+            "value": "3.0"
+        },
+        "raft_surface_line_width": {
+            "value": "0.4"
+        },
+        "raft_surface_thickness": {
+            "value": "0.27"
+        },
+        "retraction_amount": {
+            "value": "2.0"
+        },
+        "retraction_combing": {
+            "default_value": "all"
+        },
+        "retraction_enable": {
+            "value": "True"
+        },
+        "retraction_hop_enabled": {
+            "value": "1.0"
+        },
+        "retraction_min_travel": {
+            "value": "1.5"
+        },
+        "retraction_speed": {
+            "value": "40.0"
+        },
+        "skin_overlap": {
+            "value": "15.0"
+        },
+        "skirt_brim_minimal_length": {
+            "value": "150.0"
+        },
+        "skirt_gap": {
+            "value": "3.0"
+        },
+        "skirt_line_count": {
+            "value": "1.0"
+        },
+        "speed_infill": {
+            "value": "50.0"
+        },
+        "speed_layer_0": {
+            "value": "30.0"
+        },
+        "speed_print": {
+            "value": "50.0"
+        },
+        "speed_topbottom": {
+            "value": "30.0"
+        },
+        "speed_travel": {
+            "value": "50.0"
+        },
+        "speed_wall_0": {
+            "value": "25.0"
+        },
+        "speed_wall_x": {
+            "value": "35.0"
+        },
+        "support_angle": {
+            "value": "60.0"
+        },
+        "support_enable": {
+            "value": "False"
+        },
+        "support_infill_rate": {
+            "value": "15.0"
+        },
+        "support_pattern": {
+            "default_value": "lines"
+        },
+        "support_type": {
+            "default_value": "everywhere"
+        },
+        "support_xy_distance": {
+            "value": "0.5"
+        },
+        "support_z_distance": {
+            "value": "0.1"
+        },
+        "top_thickness": {
+            "value": "0.5"
+        },
+        "wall_thickness": {
+            "value": "0.8"
+        }
+    }
+}

resources/definitions/ultimaker3.def.json

@@ -106,6 +106,7 @@
         "line_width": { "value": "machine_nozzle_size * 0.875" },
         "machine_min_cool_heat_time_window": { "value": "15" },
         "default_material_print_temperature": { "value": "200" },
+        "material_print_temperature_layer_0": { "value": "material_print_temperature + 5" },
         "material_bed_temperature": { "maximum_value": "115" },
         "material_bed_temperature_layer_0": { "maximum_value": "115" },
         "material_standby_temperature": { "value": "100" },

resources/definitions/ultimaker_original.def.json

@@ -62,7 +62,7 @@
             "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
         },
         "machine_end_gcode": {
-            "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
+            "value": "'M104 S0 ;extruder heater off' + ('\\nM140 S0 ;heated bed heater off' if machine_heated_bed else '') + '\\nG91 ;relative positioning\\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning'"
         }
     }
 }

resources/definitions/vertex_k8400.def.json

@@ -0,0 +1,84 @@
+{
+    "id": "vertex_k8400",
+    "version": 2,
+    "name": "Vertex K8400",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "manufacturer": "Velleman",
+        "category": "Other",
+        "file_formats": "text/x-gcode",
+        "icon": "icon_ultimaker2",
+        "platform": "Vertex_build_panel.stl",
+        "platform_offset": [0, -2, 0],        
+        "supports_usb_connection": true,
+        "supported_actions": ["MachineSettingsAction"]
+    },
+    "overrides": {
+        "machine_name": { "default_value": "Vertex K8400" },
+        "machine_heated_bed": {
+            "default_value": true
+        },
+        "material_bed_temperature": {
+            "default_value": 0
+        },
+        "material_bed_temperature_layer_0": {
+            "default_value": 0
+        },
+        "machine_width": {
+            "default_value": 200
+        },
+        "machine_height": {
+            "default_value": 190
+        },
+        "machine_depth": {
+            "default_value": 200
+        },
+        "machine_disallowed_areas": { "default_value": [
+            [[-100,100],[-100,80],[100,80],[100,100]]
+        ]},
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "machine_nozzle_size": {
+            "default_value": 0.35
+        },
+        "material_diameter": {
+            "default_value": 1.75
+        },
+        "machine_head_polygon": {
+            "default_value": [
+                [-60, -18],
+                [-60, 40],
+                [18, 40],
+                [18, -18]
+            ]
+        },
+        "machine_head_with_fans_polygon": {
+            "default_value": [
+                [-60, -40],
+                [-60, 40],
+                [18, 40],
+                [18, -40]
+            ]
+        },
+        "gantry_height": {
+            "default_value": 18
+        },
+        "machine_nozzle_heat_up_speed": {
+            "default_value": 2
+        },
+        "machine_nozzle_cool_down_speed": {
+            "default_value": 2
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap (Marlin/Sprinter)"
+        },
+        "machine_start_gcode": {
+            "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
+        },
+        "machine_end_gcode": {
+            "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
+        }
+    }
+}

resources/definitions/vertex_k8400_dual.def.json

@@ -0,0 +1,92 @@
+{
+    "id": "vertex_k8400_dual",
+    "version": 2,
+    "name": "Vertex K8400 Dual",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "manufacturer": "Velleman",
+        "category": "Other",
+        "file_formats": "text/x-gcode",
+        "icon": "icon_ultimaker2",
+        "platform": "Vertex_build_panel.stl",
+        "platform_offset": [0, -2, 0],        
+        "machine_extruder_trains": {
+            "0": "vertex_k8400_dual_1st",
+            "1": "vertex_k8400_dual_2nd"
+        }
+    },
+    "overrides": {
+        "machine_name": { "default_value": "Vertex K8400 Dual" },
+        "machine_heated_bed": {
+            "default_value": true
+        },
+        "material_bed_temperature": {
+            "default_value": 0
+        },
+        "material_bed_temperature_layer_0": {
+            "default_value": 0
+        },
+        "machine_width": {
+            "default_value": 223.7
+        },
+        "machine_height": {
+            "default_value": 190
+        },
+        "machine_depth": {
+            "default_value": 200
+        },
+        "machine_disallowed_areas": { "default_value": [
+            [[-111.85,100],[111.85,100],[-111.85,80],[111.85,80]]
+        ]},
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "machine_use_extruder_offset_to_offset_coords": {
+            "default_value": true
+        },
+        "machine_nozzle_size": {
+            "default_value": 0.35
+        },
+        "material_diameter": {
+            "default_value": 1.75
+        },
+        "machine_head_polygon": {
+            "default_value": [
+                [-60, -18],
+                [-60, 40],
+                [18, 40],
+                [18, -18]
+            ]
+        },
+        "machine_head_with_fans_polygon": {
+            "default_value": [
+                [-60, -40],
+                [-60, 40],
+                [18, 40],
+                [18, -40]
+            ]
+        },
+        "gantry_height": {
+            "default_value": 18
+        },
+        "machine_nozzle_heat_up_speed": {
+            "default_value": 2
+        },
+        "machine_nozzle_cool_down_speed": {
+            "default_value": 2
+        },
+        "machine_extruder_count": {
+            "default_value": 2
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap (Marlin/Sprinter)"
+        },
+        "machine_start_gcode": {
+            "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
+        },
+        "machine_end_gcode": {
+            "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
+        }
+    }
+}

resources/extruders/cartesio_extruder_0.def.json

@@ -16,10 +16,10 @@
         "machine_nozzle_offset_x": { "default_value": 0.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
         "machine_extruder_start_code": {
-           "default_value": "M117 Heating nozzles....\nM104 S190 T0\nG1 X70 Y20 F9000\nM109 S270 T0 ;wait for nozzle to heat up\nT0\n\nM117 purging nozzle\nG92 E0\nG1 E6 F90\nG92 E0\nG1 E-2 F300\nG92 E0\nM117 wiping nozzle\nG1 X1 Y28 F3000\nG1 X70 F6000\n\nM117 printing\n"
+          "default_value": "\n;start extruder_0\nM117 Heating nozzles....\nM104 S190 T0\nG1 X70 Y20 F9000\nM109 S190 T0\n\nM117 purging nozzle\nG92 E0\nG1 E6 F90\nG92 E0\nG1 E-2 F300\nG92 E0\nM117 wiping nozzle\nG1 X1 Y28 F3000\nG1 X70 F6000\n\nM117 printing\n"
         },
         "machine_extruder_end_code": {
-           "default_value": "\nM104 S160 T0\n;end extruder_0\nM117 temp is {material_print_temp}"
+           "default_value": "\nM104 T0 S155\n;end extruder_0\nM117 temp is {material_print_temp}"
         }
     }
 }

resources/extruders/cartesio_extruder_1.def.json

@@ -16,10 +16,10 @@
         "machine_nozzle_offset_x": { "default_value": 24.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
         "machine_extruder_start_code": {
-           "default_value": "\n;start extruder_1\nM117 Heating nozzles....\nM104 S190 T1\nG1 X70 Y20 F9000\nM109 S190 T1 ;wait for nozzle to heat up\n\nM117 purging nozzle\nG92 E0\nG1 E6 F90\nG92 E0\nG1 E-2 F300\nG92 E0\n\nM117 wiping nozzle\nG1 X1 Y28 F3000\nG1 X70 F6000\n\nM117 printing\n"
+          "default_value": "\n;start extruder_1\nM117 Heating nozzles....\nM104 S190 T1\nG1 X70 Y20 F9000\nM109 S190 T1\n\nM117 purging nozzle\nG92 E0\nG1 E6 F90\nG92 E0\nG1 E-2 F300\nG92 E0\n\nM117 wiping nozzle\nG1 X1 Y28 F3000\nG1 X70 F6000\n\nM117 printing\n"
         },
         "machine_extruder_end_code": {
-           "default_value": "\nM104 T0 S120\n;end extruder_1\n"
+           "default_value": "\nM104 T1 S155\n;end extruder_1\n"
         }
     }
 }

resources/extruders/cartesio_extruder_2.def.json

@@ -19,7 +19,7 @@
           "default_value": "\n;start extruder_2\nM117 Heating nozzles....\nM104 S190 T2\nG1 X70 Y20 F9000\nM109 S190 T2\n\nM117 purging nozzle\nG92 E0\nG1 E6 F90\nG92 E0\nG1 E-2 F300\nG92 E0\n\nM117 wiping nozzle\nG1 X1 Y28 F3000\nG1 X70 F6000\n\nM117 printing\n"
         },
         "machine_extruder_end_code": {
-           "default_value": "\nM104 T2 S120\n;end extruder_2\n"
+           "default_value": "\nM104 T2 S155\n;end extruder_2\n"
         }
     }
 }

resources/extruders/cartesio_extruder_3.def.json

@@ -19,7 +19,7 @@
           "default_value": "\n;start extruder_3\nM117 Heating nozzles....\nM104 S190 T3\nG1 X70 Y20 F9000\nM109 S190 T3\n\nM117 purging nozzle\nG92 E0\nG1 E6 F90\nG92 E0\nG1 E-2 F300\nG92 E0\n\nM117 wiping nozzle\nG1 X1 Y28 F3000\nG1 X70 F6000\n\nM117 printing\n"
         },
         "machine_extruder_end_code": {
-           "default_value": "\nM104 T3 S120\n;end extruder_3\n"
+           "default_value": "\nM104 T3 S155\n;end extruder_3\n"
         }
     }
 }

resources/extruders/vertex_k8400_dual_1st.def.json

@@ -0,0 +1,26 @@
+{
+    "id": "vertex_k8400_dual_1st",
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "vertex_k8400_dual",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 0,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_offset_x": { "default_value": 23.7 },
+        "machine_nozzle_offset_y": { "default_value": 0.0 },
+
+        "machine_extruder_start_pos_abs": { "default_value": true },
+        "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },
+        "machine_extruder_start_pos_y": { "value": "prime_tower_position_y" },
+        "machine_extruder_end_pos_abs": { "default_value": true },
+        "machine_extruder_end_pos_x": { "value": "prime_tower_position_x" },
+        "machine_extruder_end_pos_y": { "value": "prime_tower_position_y" }
+    }
+}

resources/extruders/vertex_k8400_dual_2nd.def.json

@@ -0,0 +1,26 @@
+{
+    "id": "vertex_k8400_dual_2nd",
+    "version": 2,
+    "name": "Extruder 2",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "vertex_k8400_dual",
+        "position": "1"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 1,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_offset_x": { "default_value": 0.0 },
+        "machine_nozzle_offset_y": { "default_value": 0.0 },
+
+        "machine_extruder_start_pos_abs": { "default_value": true },
+        "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },
+        "machine_extruder_start_pos_y": { "value": "prime_tower_position_y" },
+        "machine_extruder_end_pos_abs": { "default_value": true },
+        "machine_extruder_end_pos_x": { "value": "prime_tower_position_x" },
+        "machine_extruder_end_pos_y": { "value": "prime_tower_position_y" }
+    }
+}

resources/i18n/fr/cura.po

@@ -1425,7 +1425,7 @@ msgstr "X min"
 #: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:278
 msgctxt "@label"
 msgid "Y min"
-msgstr "X min"
+msgstr "Y min"
 
 #: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:294
 msgctxt "@label"

resources/i18n/nl/cura.po

@@ -3010,7 +3010,7 @@ msgstr "Engine-&logboek Weergeven..."
 #: /home/ruben/Projects/Cura/resources/qml/Actions.qml:307
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
-msgstr "Configuratiemap Weergeven"
+msgstr "Open Configuratiemap"
 
 #: /home/ruben/Projects/Cura/resources/qml/Actions.qml:314
 msgctxt "@action:menu"

resources/qml/AboutDialog.qml

@@ -73,68 +73,76 @@ UM.Dialog
         anchors.topMargin: UM.Theme.getSize("default_margin").height
     }
 
-    ListView
+    ScrollView
     {
-        id: projectsList
-
         anchors.top: creditsNotes.bottom
-        anchors.topMargin: 10
+        anchors.topMargin: UM.Theme.getSize("default_margin").height
 
         width: parent.width
-        height: childrenRect.height
+        height: base.height - y - (2 * UM.Theme.getSize("default_margin").height + closeButton.height)
 
-        delegate: Row
+        ListView
         {
-            Label
+            id: projectsList
-            {
-                text: "<a href='%1' title='%2'>%2</a>".arg(model.url).arg(model.name)
-                width: projectsList.width * 0.25
-                elide: Text.ElideRight
-                onLinkActivated: Qt.openUrlExternally(link)
-            }
-            Label
-            {
-                text: model.description
-                elide: Text.ElideRight
-                width: projectsList.width * 0.6
-            }
-            Label
-            {
-                text: model.license
-                elide: Text.ElideRight
-                width: projectsList.width * 0.15
-            }
-        }
-        model: ListModel
-        {
-            id: projectsModel
-        }
-        Component.onCompleted:
-        {
-            projectsModel.append({ name:"Cura", description: catalog.i18nc("@label", "Graphical user interface"), license: "AGPLv3", url: "https://github.com/Ultimaker/Cura" });
-            projectsModel.append({ name:"Uranium", description: catalog.i18nc("@label", "Application framework"), license: "AGPLv3", url: "https://github.com/Ultimaker/Uranium" });
-            projectsModel.append({ name:"CuraEngine", description: catalog.i18nc("@label", "GCode generator"), license: "AGPLv3", url: "https://github.com/Ultimaker/CuraEngine" });
-            projectsModel.append({ name:"libArcus", description: catalog.i18nc("@label", "Interprocess communication library"), license: "AGPLv3", url: "https://github.com/Ultimaker/libArcus" });
 
-            projectsModel.append({ name:"Python", description: catalog.i18nc("@label", "Programming language"), license: "Python", url: "http://python.org/" });
+            width: parent.width
-            projectsModel.append({ name:"Qt5", description: catalog.i18nc("@label", "GUI framework"), license: "LGPLv3", url: "https://www.qt.io/" });
+
-            projectsModel.append({ name:"PyQt", description: catalog.i18nc("@label", "GUI framework bindings"), license: "GPL", url: "https://riverbankcomputing.com/software/pyqt" });
+            delegate: Row
-            projectsModel.append({ name:"SIP", description: catalog.i18nc("@label", "C/C++ Binding library"), license: "GPL", url: "https://riverbankcomputing.com/software/sip" });
+            {
-            projectsModel.append({ name:"Protobuf", description: catalog.i18nc("@label", "Data interchange format"), license: "BSD", url: "https://developers.google.com/protocol-buffers" });
+                Label
-            projectsModel.append({ name:"SciPy", description: catalog.i18nc("@label", "Support library for scientific computing "), license: "BSD-new", url: "https://www.scipy.org/" });
+                {
-            projectsModel.append({ name:"NumPy", description: catalog.i18nc("@label", "Support library for faster math"), license: "BSD", url: "http://www.numpy.org/" });
+                    text: "<a href='%1' title='%2'>%2</a>".arg(model.url).arg(model.name)
-            projectsModel.append({ name:"NumPy-STL", description: catalog.i18nc("@label", "Support library for handling STL files"), license: "BSD", url: "https://github.com/WoLpH/numpy-stl" });
+                    width: (projectsList.width * 0.25) | 0
-            projectsModel.append({ name:"PySerial", description: catalog.i18nc("@label", "Serial communication library"), license: "Python", url: "http://pyserial.sourceforge.net/" });
+                    elide: Text.ElideRight
-            projectsModel.append({ name:"python-zeroconf", description: catalog.i18nc("@label", "ZeroConf discovery library"), license: "LGPL", url: "https://github.com/jstasiak/python-zeroconf" });
+                    onLinkActivated: Qt.openUrlExternally(link)
-            projectsModel.append({ name:"Clipper", description: catalog.i18nc("@label", "Polygon clipping library"), license: "Boost", url: "http://www.angusj.com/delphi/clipper.php" });
+                }
-            projectsModel.append({ name:"Open Sans", description: catalog.i18nc("@label", "Font"), license: "Apache 2.0", url: "https://fonts.google.com/specimen/Open+Sans" });
+                Label
-            projectsModel.append({ name:"Font-Awesome-SVG-PNG", description: catalog.i18nc("@label", "SVG icons"), license: "SIL OFL 1.1", url: "https://github.com/encharm/Font-Awesome-SVG-PNG" });
+                {
+                    text: model.description
+                    elide: Text.ElideRight
+                    width: (projectsList.width * 0.6) | 0
+                }
+                Label
+                {
+                    text: model.license
+                    elide: Text.ElideRight
+                    width: (projectsList.width * 0.15) | 0
+                }
+            }
+            model: ListModel
+            {
+                id: projectsModel
+            }
+            Component.onCompleted:
+            {
+                projectsModel.append({ name:"Cura", description: catalog.i18nc("@label", "Graphical user interface"), license: "AGPLv3", url: "https://github.com/Ultimaker/Cura" });
+                projectsModel.append({ name:"Uranium", description: catalog.i18nc("@label", "Application framework"), license: "AGPLv3", url: "https://github.com/Ultimaker/Uranium" });
+                projectsModel.append({ name:"CuraEngine", description: catalog.i18nc("@label", "GCode generator"), license: "AGPLv3", url: "https://github.com/Ultimaker/CuraEngine" });
+                projectsModel.append({ name:"libArcus", description: catalog.i18nc("@label", "Interprocess communication library"), license: "AGPLv3", url: "https://github.com/Ultimaker/libArcus" });
+
+                projectsModel.append({ name:"Python", description: catalog.i18nc("@label", "Programming language"), license: "Python", url: "http://python.org/" });
+                projectsModel.append({ name:"Qt5", description: catalog.i18nc("@label", "GUI framework"), license: "LGPLv3", url: "https://www.qt.io/" });
+                projectsModel.append({ name:"PyQt", description: catalog.i18nc("@label", "GUI framework bindings"), license: "GPL", url: "https://riverbankcomputing.com/software/pyqt" });
+                projectsModel.append({ name:"SIP", description: catalog.i18nc("@label", "C/C++ Binding library"), license: "GPL", url: "https://riverbankcomputing.com/software/sip" });
+                projectsModel.append({ name:"Protobuf", description: catalog.i18nc("@label", "Data interchange format"), license: "BSD", url: "https://developers.google.com/protocol-buffers" });
+                projectsModel.append({ name:"SciPy", description: catalog.i18nc("@label", "Support library for scientific computing "), license: "BSD-new", url: "https://www.scipy.org/" });
+                projectsModel.append({ name:"NumPy", description: catalog.i18nc("@label", "Support library for faster math"), license: "BSD", url: "http://www.numpy.org/" });
+                projectsModel.append({ name:"NumPy-STL", description: catalog.i18nc("@label", "Support library for handling STL files"), license: "BSD", url: "https://github.com/WoLpH/numpy-stl" });
+                projectsModel.append({ name:"libSavitar", description: catalog.i18nc("@label", "Support library for handling 3MF files"), license: "AGPLv3", url: "https://github.com/ultimaker/libsavitar" });
+                projectsModel.append({ name:"PySerial", description: catalog.i18nc("@label", "Serial communication library"), license: "Python", url: "http://pyserial.sourceforge.net/" });
+                projectsModel.append({ name:"python-zeroconf", description: catalog.i18nc("@label", "ZeroConf discovery library"), license: "LGPL", url: "https://github.com/jstasiak/python-zeroconf" });
+                projectsModel.append({ name:"Clipper", description: catalog.i18nc("@label", "Polygon clipping library"), license: "Boost", url: "http://www.angusj.com/delphi/clipper.php" });
+
+                projectsModel.append({ name:"Open Sans", description: catalog.i18nc("@label", "Font"), license: "Apache 2.0", url: "https://fonts.google.com/specimen/Open+Sans" });
+                projectsModel.append({ name:"Font-Awesome-SVG-PNG", description: catalog.i18nc("@label", "SVG icons"), license: "SIL OFL 1.1", url: "https://github.com/encharm/Font-Awesome-SVG-PNG" });
+            }
         }
     }
 
     rightButtons: Button
     {
         //: Close about dialog button
+        id: closeButton
         text: catalog.i18nc("@action:button","Close");
 
         onClicked: base.visible = false;

resources/qml/Cura.qml

@@ -45,7 +45,7 @@ UM.MainWindow
         function getMeshName(path){
             //takes the path the complete path of the meshname and returns only the filebase
             var fileName = path.slice(path.lastIndexOf("/") + 1)
-            var fileBase = fileName.slice(0, fileName.lastIndexOf("."))
+            var fileBase = fileName.slice(0, fileName.indexOf("."))
             return fileBase
         }
 
@@ -786,6 +786,8 @@ UM.MainWindow
             {
                 UM.WorkspaceFileHandler.readLocalFile(fileUrls[i])
             }
+            var meshName = backgroundItem.getMeshName(fileUrls[0].toString())
+            backgroundItem.hasMesh(decodeURIComponent(meshName))
         }
     }
 
@@ -880,6 +882,21 @@ UM.MainWindow
         }
     }
 
+    DiscardOrKeepProfileChangesDialog
+    {
+        id: discardOrKeepProfileChangesDialog
+    }
+
+    Connections
+    {
+        target: Printer
+        onShowDiscardOrKeepProfileChanges:
+        {
+            discardOrKeepProfileChangesDialog.show()
+        }
+
+    }
+
     Connections
     {
         target: Cura.Actions.addMachine

resources/qml/DiscardOrKeepProfileChangesDialog.qml

@@ -0,0 +1,174 @@
+// Copyright (c) 2017 Ultimaker B.V.
+// Cura is released under the terms of the AGPLv3 or higher.
+
+import QtQuick 2.1
+import QtQuick.Controls 1.1
+import QtQuick.Dialogs 1.2
+
+import UM 1.2 as UM
+import Cura 1.1 as Cura
+
+UM.Dialog
+{
+    id: base
+    title: catalog.i18nc("@title:window", "Discard or Keep changes")
+
+    width: 500
+    height: 300
+    property var changesModel: Cura.UserChangesModel{ id: userChangesModel}
+    onVisibilityChanged:
+    {
+        if(visible)
+        {
+            changesModel.forceUpdate()
+        }
+    }
+
+    Column
+    {
+        anchors.fill: parent
+        spacing: UM.Theme.getSize("default_margin").width
+
+        UM.I18nCatalog
+        {
+            id: catalog;
+            name:"cura"
+        }
+
+        Row
+        {
+            height: childrenRect.height
+            anchors.margins: UM.Theme.getSize("default_margin").width
+            anchors.left: parent.left
+            anchors.right: parent.right
+            spacing: UM.Theme.getSize("default_margin").width
+            UM.RecolorImage
+            {
+                source: UM.Theme.getIcon("star")
+                width : 30
+                height: width
+                color: UM.Theme.getColor("setting_control_button")
+            }
+
+            Label
+            {
+                text: "You have customized some profile settings.\nWould you like to keep or discard those settings?"
+                anchors.margins: UM.Theme.getSize("default_margin").width
+                font: UM.Theme.getFont("default_bold")
+                wrapMode: Text.WordWrap
+            }
+        }
+
+        TableView
+        {
+            anchors.margins: UM.Theme.getSize("default_margin").width
+            anchors.left: parent.left
+            anchors.right: parent.right
+            height: 200
+            id: tableView
+            Component
+            {
+                id: labelDelegate
+                Label
+                {
+                    property var extruder_name: userChangesModel.getItem(styleData.row).extruder
+                    anchors.left: parent.left
+                    anchors.leftMargin: UM.Theme.getSize("default_margin").width
+                    font: UM.Theme.getFont("default")
+                    text:
+                    {
+                        var result = styleData.value
+                        if (extruder_name!= "")
+                        {
+                            result += " (" + extruder_name + ")"
+                        }
+                        return result
+                    }
+                }
+            }
+
+            Component
+            {
+                id: defaultDelegate
+                Label
+                {
+                    text: styleData.value
+                    font: UM.Theme.getFont("default")
+                    color: UM.Theme.getColor("setting_control_disabled_text")
+                }
+            }
+
+            TableViewColumn
+            {
+                role: "label"
+                title: catalog.i18nc("@title:column", "Settings")
+                delegate: labelDelegate
+                width: tableView.width * 0.5
+            }
+
+            TableViewColumn
+            {
+                role: "original_value"
+                title: "Profile"
+                width: tableView.width * 0.25
+                delegate: defaultDelegate
+            }
+            TableViewColumn
+            {
+                role: "user_value"
+                title: catalog.i18nc("@title:column", "Customized")
+                width: tableView.width * 0.25 - 1
+            }
+            section.property: "category"
+            section.delegate: Label
+            {
+                text: section
+                font.bold: true
+            }
+
+            model: base.changesModel
+        }
+
+        Item
+        {
+            anchors.right: parent.right
+            anchors.left: parent.left
+            anchors.margins: UM.Theme.getSize("default_margin").width
+            height:childrenRect.height
+
+            Button
+            {
+                id: discardButton
+                text: catalog.i18nc("@action:button", "Discard");
+                anchors.right: parent.right
+                onClicked:
+                {
+                    Printer.discardOrKeepProfileChangesClosed("discard")
+                    base.hide()
+                }
+            }
+
+            Button
+            {
+                id: keepButton
+                text: catalog.i18nc("@action:button", "Keep");
+                anchors.right: discardButton.left
+                anchors.rightMargin: UM.Theme.getSize("default_margin").width
+                onClicked:
+                {
+                    Printer.discardOrKeepProfileChangesClosed("keep")
+                    base.hide()
+                }
+            }
+
+            Button
+            {
+                id: createNewProfileButton
+                text: catalog.i18nc("@action:button", "Create new profile");
+                anchors.left: parent.left
+                action: Cura.Actions.addProfile
+                onClicked: base.hide()
+            }
+        }
+    }
+}

resources/qml/JobSpecs.qml

@@ -12,7 +12,7 @@ import Cura 1.0 as Cura
 Item {
     id: base
 
-    property bool activity: Printer.getPlatformActivity
+    property bool activity: Printer.platformActivity
     property string fileBaseName
     property variant activeMachineName: Cura.MachineManager.activeMachineName
 

resources/qml/MonitorButton.qml

@@ -80,7 +80,7 @@ Item
         }
     }
 
-    property bool activity: Printer.getPlatformActivity;
+    property bool activity: Printer.platformActivity;
     property int totalHeight: childrenRect.height + UM.Theme.getSize("default_margin").height
     property string fileBaseName
     property string statusText:

resources/qml/Preferences/GeneralPage.qml

@@ -58,322 +58,368 @@ UM.PreferencesPage
         }
     }
 
-    Column
+    ScrollView
     {
-        //: Model used to check if a plugin exists
+        width: parent.width
-        UM.PluginsModel { id: plugins }
+        height: parent.height
 
-        //: Language selection label
+        Column
-        UM.I18nCatalog{id: catalog; name:"cura"}
-
-        Label
         {
-            font.bold: true
+            //: Model used to check if a plugin exists
-            text: catalog.i18nc("@label","Interface")
+            UM.PluginsModel { id: plugins }
-        }
+
+            //: Language selection label
+            UM.I18nCatalog{id: catalog; name:"cura"}
 
-        Row
-        {
-            spacing: UM.Theme.getSize("default_margin").width
             Label
             {
-                id: languageLabel
+                font.bold: true
-                text: catalog.i18nc("@label","Language:")
+                text: catalog.i18nc("@label","Interface")
-                anchors.verticalCenter: languageComboBox.verticalCenter
             }
 
-            ComboBox
+            Row
             {
-                id: languageComboBox
+                spacing: UM.Theme.getSize("default_margin").width
-                model: ListModel
+                Label
                 {
-                    id: languageList
+                    id: languageLabel
+                    text: catalog.i18nc("@label","Language:")
+                    anchors.verticalCenter: languageComboBox.verticalCenter
+                }
 
-                    Component.onCompleted: {
+                ComboBox
-                        append({ text: "English", code: "en" })
+                {
-                        append({ text: "Deutsch", code: "de" })
+                    id: languageComboBox
-                        append({ text: "Español", code: "es" })
+                    model: ListModel
-                        append({ text: "Suomi", code: "fi" })
+                    {
-                        append({ text: "Français", code: "fr" })
+                        id: languageList
-                        append({ text: "Italiano", code: "it" })
+
-                        append({ text: "Nederlands", code: "nl" })
+                        Component.onCompleted: {
-                        append({ text: "Português do Brasil", code: "ptbr" })
+                            append({ text: "English", code: "en" })
-                        append({ text: "Русский", code: "ru" })
+                            append({ text: "Deutsch", code: "de" })
-                        append({ text: "Türkçe", code: "tr" })
+                            append({ text: "Español", code: "es" })
+                            append({ text: "Suomi", code: "fi" })
+                            append({ text: "Français", code: "fr" })
+                            append({ text: "Italiano", code: "it" })
+                            append({ text: "Nederlands", code: "nl" })
+                            append({ text: "Português do Brasil", code: "ptbr" })
+                            append({ text: "Русский", code: "ru" })
+                            append({ text: "Türkçe", code: "tr" })
+                        }
+                    }
+
+                    currentIndex:
+                    {
+                        var code = UM.Preferences.getValue("general/language");
+                        for(var i = 0; i < languageList.count; ++i)
+                        {
+                            if(model.get(i).code == code)
+                            {
+                                return i
+                            }
+                        }
+                    }
+                    onActivated: UM.Preferences.setValue("general/language", model.get(index).code)
+
+                    Component.onCompleted:
+                    {
+                        // Because ListModel is stupid and does not allow using qsTr() for values.
+                        for(var i = 0; i < languageList.count; ++i)
+                        {
+                            languageList.setProperty(i, "text", catalog.i18n(languageList.get(i).text));
+                        }
+
+                        // Glorious hack time. ComboBox does not update the text properly after changing the
+                        // model. So change the indices around to force it to update.
+                        currentIndex += 1;
+                        currentIndex -= 1;
                     }
                 }
 
-                currentIndex:
+                Label
                 {
-                    var code = UM.Preferences.getValue("general/language");
+                    id: currencyLabel
-                    for(var i = 0; i < languageList.count; ++i)
+                    text: catalog.i18nc("@label","Currency:")
+                    anchors.verticalCenter: languageComboBox.verticalCenter
+                }
+                TextField
+                {
+                    id: currencyField
+                    text: UM.Preferences.getValue("cura/currency")
+                    onTextChanged: UM.Preferences.setValue("cura/currency", text)
+                }
+            }
+
+            Label
+            {
+                id: languageCaption
+
+                //: Language change warning
+                text: catalog.i18nc("@label", "You will need to restart the application for language changes to have effect.")
+                wrapMode: Text.WordWrap
+                font.italic: true
+            }
+
+            Item
+            {
+                //: Spacer
+                height: UM.Theme.getSize("default_margin").height
+                width: UM.Theme.getSize("default_margin").width
+            }
+
+            UM.TooltipArea
+            {
+                width: childrenRect.width;
+                height: childrenRect.height;
+
+                text: catalog.i18nc("@info:tooltip","Slice automatically when changing settings.")
+
+                CheckBox
+                {
+                    id: autoSliceCheckbox
+
+                    checked: boolCheck(UM.Preferences.getValue("general/auto_slice"))
+                    onClicked: UM.Preferences.setValue("general/auto_slice", checked)
+
+                    text: catalog.i18nc("@option:check","Slice automatically");
+                }
+            }
+
+            Item
+            {
+                //: Spacer
+                height: UM.Theme.getSize("default_margin").height
+                width: UM.Theme.getSize("default_margin").width
+            }
+
+            Label
+            {
+                font.bold: true
+                text: catalog.i18nc("@label","Viewport behavior")
+            }
+
+            UM.TooltipArea
+            {
+                width: childrenRect.width;
+                height: childrenRect.height;
+
+                text: catalog.i18nc("@info:tooltip","Highlight unsupported areas of the model in red. Without support these areas will not print properly.")
+
+                CheckBox
+                {
+                    id: showOverhangCheckbox
+
+                    checked: boolCheck(UM.Preferences.getValue("view/show_overhang"))
+                    onClicked: UM.Preferences.setValue("view/show_overhang",  checked)
+
+                    text: catalog.i18nc("@option:check","Display overhang");
+                }
+            }
+
+            UM.TooltipArea {
+                width: childrenRect.width;
+                height: childrenRect.height;
+                text: catalog.i18nc("@info:tooltip","Moves the camera so the model is in the center of the view when an model is selected")
+
+                CheckBox
+                {
+                    id: centerOnSelectCheckbox
+                    text: catalog.i18nc("@action:button","Center camera when item is selected");
+                    checked: boolCheck(UM.Preferences.getValue("view/center_on_select"))
+                    onClicked: UM.Preferences.setValue("view/center_on_select",  checked)
+                }
+            }
+
+            UM.TooltipArea {
+                width: childrenRect.width
+                height: childrenRect.height
+                text: catalog.i18nc("@info:tooltip", "Should models on the platform be moved so that they no longer intersect?")
+
+                CheckBox
+                {
+                    id: pushFreeCheckbox
+                    text: catalog.i18nc("@option:check", "Ensure models are kept apart")
+                    checked: boolCheck(UM.Preferences.getValue("physics/automatic_push_free"))
+                    onCheckedChanged: UM.Preferences.setValue("physics/automatic_push_free", checked)
+                }
+            }
+            UM.TooltipArea {
+                width: childrenRect.width
+                height: childrenRect.height
+                text: catalog.i18nc("@info:tooltip", "Should models on the platform be moved down to touch the build plate?")
+
+                CheckBox
+                {
+                    id: dropDownCheckbox
+                    text: catalog.i18nc("@option:check", "Automatically drop models to the build plate")
+                    checked: boolCheck(UM.Preferences.getValue("physics/automatic_drop_down"))
+                    onCheckedChanged: UM.Preferences.setValue("physics/automatic_drop_down", checked)
+                }
+            }
+
+            UM.TooltipArea {
+                width: childrenRect.width;
+                height: childrenRect.height;
+                text: catalog.i18nc("@info:tooltip","Display 5 top layers in layer view or only the top-most layer. Rendering 5 layers takes longer, but may show more information.")
+
+                CheckBox
+                {
+                    id: topLayerCountCheckbox
+                    text: catalog.i18nc("@action:button","Display five top layers in layer view compatibility mode");
+                    checked: UM.Preferences.getValue("view/top_layer_count") == 5
+                    onClicked:
                     {
-                        if(model.get(i).code == code)
+                        if(UM.Preferences.getValue("view/top_layer_count") == 5)
                         {
-                            return i
+                            UM.Preferences.setValue("view/top_layer_count", 1)
+                        }
+                        else
+                        {
+                            UM.Preferences.setValue("view/top_layer_count", 5)
                         }
                     }
                 }
-                onActivated: UM.Preferences.setValue("general/language", model.get(index).code)
+            }
 
-                Component.onCompleted:
+            UM.TooltipArea {
+                width: childrenRect.width
+                height: childrenRect.height
+                text: catalog.i18nc("@info:tooltip", "Should only the top layers be displayed in layerview?")
+
+                CheckBox
                 {
-                    // Because ListModel is stupid and does not allow using qsTr() for values.
+                    id: topLayersOnlyCheckbox
-                    for(var i = 0; i < languageList.count; ++i)
+                    text: catalog.i18nc("@option:check", "Only display top layer(s) in layer view compatibility mode")
-                    {
+                    checked: boolCheck(UM.Preferences.getValue("view/only_show_top_layers"))
-                        languageList.setProperty(i, "text", catalog.i18n(languageList.get(i).text));
+                    onCheckedChanged: UM.Preferences.setValue("view/only_show_top_layers", checked)
-                    }
-
-                    // Glorious hack time. ComboBox does not update the text properly after changing the
-                    // model. So change the indices around to force it to update.
-                    currentIndex += 1;
-                    currentIndex -= 1;
                 }
             }
 
+            UM.TooltipArea {
+                width: childrenRect.width
+                height: childrenRect.height
+                text: catalog.i18nc("@info:tooltip", "Should layer be forced into compatibility mode?")
+
+                CheckBox
+                {
+                    id: forceLayerViewCompatibilityModeCheckbox
+                    text: catalog.i18nc("@option:check", "Force layer view compatibility mode (restart required)")
+                    checked: boolCheck(UM.Preferences.getValue("view/force_layer_view_compatibility_mode"))
+                    onCheckedChanged: UM.Preferences.setValue("view/force_layer_view_compatibility_mode", checked)
+                }
+            }
+
+            Item
+            {
+                //: Spacer
+                height: UM.Theme.getSize("default_margin").height
+                width: UM.Theme.getSize("default_margin").height
+            }
+
             Label
             {
-                id: currencyLabel
+                font.bold: true
-                text: catalog.i18nc("@label","Currency:")
+                text: catalog.i18nc("@label","Opening and saving files")
-                anchors.verticalCenter: languageComboBox.verticalCenter
             }
-            TextField
-            {
-                id: currencyField
-                text: UM.Preferences.getValue("cura/currency")
-                onTextChanged: UM.Preferences.setValue("cura/currency", text)
-            }
-        }
 
-        Label
+            UM.TooltipArea {
-        {
+                width: childrenRect.width
-            id: languageCaption
+                height: childrenRect.height
+                text: catalog.i18nc("@info:tooltip","Should models be scaled to the build volume if they are too large?")
 
-            //: Language change warning
+                CheckBox
-            text: catalog.i18nc("@label", "You will need to restart the application for language changes to have effect.")
-            wrapMode: Text.WordWrap
-            font.italic: true
-        }
-
-        Item
-        {
-            //: Spacer
-            height: UM.Theme.getSize("default_margin").height
-            width: UM.Theme.getSize("default_margin").width
-        }
-
-        Label
-        {
-            font.bold: true
-            text: catalog.i18nc("@label","Viewport behavior")
-        }
-
-        UM.TooltipArea
-        {
-            width: childrenRect.width;
-            height: childrenRect.height;
-
-            text: catalog.i18nc("@info:tooltip","Highlight unsupported areas of the model in red. Without support these areas will not print properly.")
-
-            CheckBox
-            {
-                id: showOverhangCheckbox
-
-                checked: boolCheck(UM.Preferences.getValue("view/show_overhang"))
-                onClicked: UM.Preferences.setValue("view/show_overhang",  checked)
-
-                text: catalog.i18nc("@option:check","Display overhang");
-            }
-        }
-
-        UM.TooltipArea {
-            width: childrenRect.width;
-            height: childrenRect.height;
-            text: catalog.i18nc("@info:tooltip","Moves the camera so the model is in the center of the view when an model is selected")
-
-            CheckBox
-            {
-                id: centerOnSelectCheckbox
-                text: catalog.i18nc("@action:button","Center camera when item is selected");
-                checked: boolCheck(UM.Preferences.getValue("view/center_on_select"))
-                onClicked: UM.Preferences.setValue("view/center_on_select",  checked)
-            }
-        }
-
-        UM.TooltipArea {
-            width: childrenRect.width
-            height: childrenRect.height
-            text: catalog.i18nc("@info:tooltip", "Should models on the platform be moved so that they no longer intersect?")
-
-            CheckBox
-            {
-                id: pushFreeCheckbox
-                text: catalog.i18nc("@option:check", "Ensure models are kept apart")
-                checked: boolCheck(UM.Preferences.getValue("physics/automatic_push_free"))
-                onCheckedChanged: UM.Preferences.setValue("physics/automatic_push_free", checked)
-            }
-        }
-        UM.TooltipArea {
-            width: childrenRect.width
-            height: childrenRect.height
-            text: catalog.i18nc("@info:tooltip", "Should models on the platform be moved down to touch the build plate?")
-
-            CheckBox
-            {
-                id: dropDownCheckbox
-                text: catalog.i18nc("@option:check", "Automatically drop models to the build plate")
-                checked: boolCheck(UM.Preferences.getValue("physics/automatic_drop_down"))
-                onCheckedChanged: UM.Preferences.setValue("physics/automatic_drop_down", checked)
-            }
-        }
-
-        UM.TooltipArea {
-            width: childrenRect.width;
-            height: childrenRect.height;
-            text: catalog.i18nc("@info:tooltip","Display 5 top layers in layer view or only the top-most layer. Rendering 5 layers takes longer, but may show more information.")
-
-            CheckBox
-            {
-                id: topLayerCountCheckbox
-                text: catalog.i18nc("@action:button","Display five top layers in layer view");
-                checked: UM.Preferences.getValue("view/top_layer_count") == 5
-                onClicked:
                 {
-                    if(UM.Preferences.getValue("view/top_layer_count") == 5)
+                    id: scaleToFitCheckbox
-                    {
+                    text: catalog.i18nc("@option:check","Scale large models")
-                        UM.Preferences.setValue("view/top_layer_count", 1)
+                    checked: boolCheck(UM.Preferences.getValue("mesh/scale_to_fit"))
-                    }
+                    onCheckedChanged: UM.Preferences.setValue("mesh/scale_to_fit", checked)
-                    else
-                    {
-                        UM.Preferences.setValue("view/top_layer_count", 5)
-                    }
                 }
             }
-        }
-        UM.TooltipArea {
-            width: childrenRect.width
-            height: childrenRect.height
-            text: catalog.i18nc("@info:tooltip", "Should only the top layers be displayed in layerview?")
 
-            CheckBox
+            UM.TooltipArea {
-            {
+                width: childrenRect.width
-                id: topLayersOnlyCheckbox
+                height: childrenRect.height
-                text: catalog.i18nc("@option:check", "Only display top layer(s) in layer view")
+                text: catalog.i18nc("@info:tooltip","An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?")
-                checked: boolCheck(UM.Preferences.getValue("view/only_show_top_layers"))
+
-                onCheckedChanged: UM.Preferences.setValue("view/only_show_top_layers", checked)
+                CheckBox
+                {
+                    id: scaleTinyCheckbox
+                    text: catalog.i18nc("@option:check","Scale extremely small models")
+                    checked: boolCheck(UM.Preferences.getValue("mesh/scale_tiny_meshes"))
+                    onCheckedChanged: UM.Preferences.setValue("mesh/scale_tiny_meshes", checked)
+                }
             }
-        }
 
-        Item
+            UM.TooltipArea {
-        {
+                width: childrenRect.width
-            //: Spacer
+                height: childrenRect.height
-            height: UM.Theme.getSize("default_margin").height
+                text: catalog.i18nc("@info:tooltip", "Should a prefix based on the printer name be added to the print job name automatically?")
-            width: UM.Theme.getSize("default_margin").height
-        }
 
-        Label
+                CheckBox
-        {
+                {
-            font.bold: true
+                    id: prefixJobNameCheckbox
-            text: catalog.i18nc("@label","Opening files")
+                    text: catalog.i18nc("@option:check", "Add machine prefix to job name")
-        }
+                    checked: boolCheck(UM.Preferences.getValue("cura/jobname_prefix"))
-
+                    onCheckedChanged: UM.Preferences.setValue("cura/jobname_prefix", checked)
-        UM.TooltipArea {
+                }
-            width: childrenRect.width
-            height: childrenRect.height
-            text: catalog.i18nc("@info:tooltip","Should models be scaled to the build volume if they are too large?")
-
-            CheckBox
-            {
-                id: scaleToFitCheckbox
-                text: catalog.i18nc("@option:check","Scale large models")
-                checked: boolCheck(UM.Preferences.getValue("mesh/scale_to_fit"))
-                onCheckedChanged: UM.Preferences.setValue("mesh/scale_to_fit", checked)
             }
-        }
 
-        UM.TooltipArea {
+            UM.TooltipArea {
-            width: childrenRect.width
+                width: childrenRect.width
-            height: childrenRect.height
+                height: childrenRect.height
-            text: catalog.i18nc("@info:tooltip","An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?")
+                text: catalog.i18nc("@info:tooltip", "Should a summary be shown when saving a project file?")
 
-            CheckBox
+                CheckBox
-            {
+                {
-                id: scaleTinyCheckbox
+                    text: catalog.i18nc("@option:check", "Show summary dialog when saving project")
-                text: catalog.i18nc("@option:check","Scale extremely small models")
+                    checked: boolCheck(UM.Preferences.getValue("cura/dialog_on_project_save"))
-                checked: boolCheck(UM.Preferences.getValue("mesh/scale_tiny_meshes"))
+                    onCheckedChanged: UM.Preferences.setValue("cura/dialog_on_project_save", checked)
-                onCheckedChanged: UM.Preferences.setValue("mesh/scale_tiny_meshes", checked)
+                }
             }
-        }
 
-        UM.TooltipArea {
-            width: childrenRect.width
-            height: childrenRect.height
-            text: catalog.i18nc("@info:tooltip", "Should a prefix based on the printer name be added to the print job name automatically?")
 
-            CheckBox
+            Item
             {
-                id: prefixJobNameCheckbox
+                //: Spacer
-                text: catalog.i18nc("@option:check", "Add machine prefix to job name")
+                height: UM.Theme.getSize("default_margin").height
-                checked: boolCheck(UM.Preferences.getValue("cura/jobname_prefix"))
+                width: UM.Theme.getSize("default_margin").height
-                onCheckedChanged: UM.Preferences.setValue("cura/jobname_prefix", checked)
             }
-        }
 
-        UM.TooltipArea {
+            Label
-            width: childrenRect.width
-            height: childrenRect.height
-            text: catalog.i18nc("@info:tooltip", "Should a summary be shown when saving a project file?")
-
-            CheckBox
             {
-                text: catalog.i18nc("@option:check", "Show summary dialog when saving project")
+                font.bold: true
-                checked: boolCheck(UM.Preferences.getValue("cura/dialog_on_project_save"))
+                visible: checkUpdatesCheckbox.visible || sendDataCheckbox.visible
-                onCheckedChanged: UM.Preferences.setValue("cura/dialog_on_project_save", checked)
+                text: catalog.i18nc("@label","Privacy")
             }
-        }
 
+            UM.TooltipArea {
+                visible: plugins.find("id", "UpdateChecker") > -1
+                width: childrenRect.width
+                height: visible ? childrenRect.height : 0
+                text: catalog.i18nc("@info:tooltip","Should Cura check for updates when the program is started?")
 
-        Item
+                CheckBox
-        {
+                {
-            //: Spacer
+                    id: checkUpdatesCheckbox
-            height: UM.Theme.getSize("default_margin").height
+                    text: catalog.i18nc("@option:check","Check for updates on start")
-            width: UM.Theme.getSize("default_margin").height
+                    checked: boolCheck(UM.Preferences.getValue("info/automatic_update_check"))
-        }
+                    onCheckedChanged: UM.Preferences.setValue("info/automatic_update_check", checked)
-
+                }
-        Label
-        {
-            font.bold: true
-            visible: checkUpdatesCheckbox.visible || sendDataCheckbox.visible
-            text: catalog.i18nc("@label","Privacy")
-        }
-
-        UM.TooltipArea {
-            visible: plugins.find("id", "UpdateChecker") > -1
-            width: childrenRect.width
-            height: visible ? childrenRect.height : 0
-            text: catalog.i18nc("@info:tooltip","Should Cura check for updates when the program is started?")
-
-            CheckBox
-            {
-                id: checkUpdatesCheckbox
-                text: catalog.i18nc("@option:check","Check for updates on start")
-                checked: boolCheck(UM.Preferences.getValue("info/automatic_update_check"))
-                onCheckedChanged: UM.Preferences.setValue("info/automatic_update_check", checked)
             }
-        }
 
-        UM.TooltipArea {
+            UM.TooltipArea {
-            visible: plugins.find("id", "SliceInfoPlugin") > -1
+                visible: plugins.find("id", "SliceInfoPlugin") > -1
-            width: childrenRect.width
+                width: childrenRect.width
-            height: visible ? childrenRect.height : 0
+                height: visible ? childrenRect.height : 0
-            text: catalog.i18nc("@info:tooltip","Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored.")
+                text: catalog.i18nc("@info:tooltip","Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored.")
 
-            CheckBox
+                CheckBox
-            {
+                {
-                id: sendDataCheckbox
+                    id: sendDataCheckbox
-                text: catalog.i18nc("@option:check","Send (anonymous) print information")
+                    text: catalog.i18nc("@option:check","Send (anonymous) print information")
-                checked: boolCheck(UM.Preferences.getValue("info/send_slice_info"))
+                    checked: boolCheck(UM.Preferences.getValue("info/send_slice_info"))
-                onCheckedChanged: UM.Preferences.setValue("info/send_slice_info", checked)
+                    onCheckedChanged: UM.Preferences.setValue("info/send_slice_info", checked)
+                }
             }
         }
     }

resources/qml/PrintMonitor.qml

@@ -1,4 +1,4 @@
-// Copyright (c) 2016 Ultimaker B.V.
+// Copyright (c) 2017 Ultimaker B.V.
 // Cura is released under the terms of the AGPLv3 or higher.
 
 import QtQuick 2.2
@@ -12,7 +12,7 @@ import Cura 1.0 as Cura
 Column
 {
     id: printMonitor
-    property var connectedPrinter: printerConnected ? Cura.MachineManager.printerOutputDevices[0] : null
+    property var connectedPrinter: Cura.MachineManager.printerOutputDevices.length >= 1 ? Cura.MachineManager.printerOutputDevices[0] : null
 
     Cura.ExtrudersModel
     {
@@ -20,47 +20,611 @@ Column
         simpleNames: true
     }
 
-    Item
+    Rectangle
     {
-        width: base.width - 2 * UM.Theme.getSize("default_margin").width
+        id: connectedPrinterHeader
-        height: childrenRect.height + UM.Theme.getSize("default_margin").height
+        width: parent.width
-        anchors.left: parent.left
+        height: childrenRect.height + UM.Theme.getSize("default_margin").height * 2
-        anchors.leftMargin: UM.Theme.getSize("default_margin").width
+        color: UM.Theme.getColor("setting_category")
 
         Label
         {
-            text: printerConnected ? connectedPrinter.connectionText : catalog.i18nc("@info:status", "The printer is not connected.")
+            id: connectedPrinterNameLabel
-            color: printerConnected && printerAcceptsCommands ? UM.Theme.getColor("setting_control_text") : UM.Theme.getColor("setting_control_disabled_text")
+            text: connectedPrinter != null ? connectedPrinter.name : catalog.i18nc("@info:status", "No printer connected")
-            font: UM.Theme.getFont("default")
+            font: UM.Theme.getFont("large")
+            color: UM.Theme.getColor("text")
+            anchors.left: parent.left
+            anchors.top: parent.top
+            anchors.margins: UM.Theme.getSize("default_margin").width
+        }
+        Label
+        {
+            id: connectedPrinterAddressLabel
+            text: (connectedPrinter != null && connectedPrinter.address != null) ? connectedPrinter.address : ""
+            font: UM.Theme.getFont("small")
+            color: UM.Theme.getColor("text_inactive")
+            anchors.top: parent.top
+            anchors.right: parent.right
+            anchors.margins: UM.Theme.getSize("default_margin").width
+        }
+        Label
+        {
+            text: connectedPrinter != null ? connectedPrinter.connectionText : catalog.i18nc("@info:status", "The printer is not connected.")
+            color: connectedPrinter != null && connectedPrinter.acceptsCommands ? UM.Theme.getColor("setting_control_text") : UM.Theme.getColor("setting_control_disabled_text")
+            font: UM.Theme.getFont("very_small")
             wrapMode: Text.WordWrap
-            width: parent.width
+            anchors.left: parent.left
+            anchors.leftMargin: UM.Theme.getSize("default_margin").width
+            anchors.right: parent.right
+            anchors.rightMargin: UM.Theme.getSize("default_margin").width
+            anchors.top: connectedPrinterNameLabel.bottom
         }
     }
 
-    Loader
+    Rectangle
     {
-        sourceComponent: monitorSection
+        color: UM.Theme.getColor("sidebar_lining")
-        property string label: catalog.i18nc("@label", "Temperatures")
+        width: parent.width
-    }
+        height: childrenRect.height
-    Repeater
+
-    {
+        Flow
-        model: machineExtruderCount.properties.value
-        delegate: Loader
         {
-            sourceComponent: monitorItem
+            id: extrudersGrid
-            property string label: machineExtruderCount.properties.value > 1 ? extrudersModel.getItem(index).name : catalog.i18nc("@label", "Hotend")
+            spacing: UM.Theme.getSize("sidebar_lining_thin").width
-            property string value: printerConnected ? Math.round(connectedPrinter.hotendTemperatures[index]) + "°C" : ""
+            width: parent.width
+
+            Repeater
+            {
+                id: extrudersRepeater
+                model: machineExtruderCount.properties.value
+
+                delegate: Rectangle
+                {
+                    id: extruderRectangle
+                    color: UM.Theme.getColor("sidebar")
+                    width: index == machineExtruderCount.properties.value - 1 && index % 2 == 0 ? extrudersGrid.width : extrudersGrid.width / 2 - UM.Theme.getSize("sidebar_lining_thin").width / 2
+                    height: UM.Theme.getSize("sidebar_extruder_box").height
+
+                    Label //Extruder name.
+                    {
+                        text: ExtruderManager.getExtruderName(index) != "" ? ExtruderManager.getExtruderName(index) : catalog.i18nc("@label", "Hotend")
+                        color: UM.Theme.getColor("text")
+                        font: UM.Theme.getFont("default")
+                        anchors.left: parent.left
+                        anchors.top: parent.top
+                        anchors.margins: UM.Theme.getSize("default_margin").width
+                    }
+                    Label //Temperature indication.
+                    {
+                        id: extruderTemperature
+                        text: (connectedPrinter != null && connectedPrinter.hotendIds[index] != null && connectedPrinter.hotendTemperatures[index] != null) ? Math.round(connectedPrinter.hotendTemperatures[index]) + "°C" : ""
+                        color: UM.Theme.getColor("text")
+                        font: UM.Theme.getFont("large")
+                        anchors.right: parent.right
+                        anchors.top: parent.top
+                        anchors.margins: UM.Theme.getSize("default_margin").width
+
+                        MouseArea //For tooltip.
+                        {
+                            id: extruderTemperatureTooltipArea
+                            hoverEnabled: true
+                            anchors.fill: parent
+                            onHoveredChanged:
+                            {
+                                if (containsMouse)
+                                {
+                                    base.showTooltip(
+                                        base,
+                                        {x: 0, y: parent.mapToItem(base, 0, -parent.height / 4).y},
+                                        catalog.i18nc("@tooltip", "The current temperature of this extruder.")
+                                    );
+                                }
+                                else
+                                {
+                                    base.hideTooltip();
+                                }
+                            }
+                        }
+                    }
+                    Rectangle //Material colour indication.
+                    {
+                        id: materialColor
+                        width: materialName.height * 0.75
+                        height: materialName.height * 0.75
+                        color: (connectedPrinter != null && connectedPrinter.materialColors[index] != null && connectedPrinter.materialIds[index] != "") ? connectedPrinter.materialColors[index] : "#00000000"
+                        border.width: UM.Theme.getSize("default_lining").width
+                        border.color: UM.Theme.getColor("lining")
+                        visible: connectedPrinter != null && connectedPrinter.materialColors[index] != null && connectedPrinter.materialIds[index] != ""
+                        anchors.left: parent.left
+                        anchors.leftMargin: UM.Theme.getSize("default_margin").width
+                        anchors.verticalCenter: materialName.verticalCenter
+
+                        MouseArea //For tooltip.
+                        {
+                            id: materialColorTooltipArea
+                            hoverEnabled: true
+                            anchors.fill: parent
+                            onHoveredChanged:
+                            {
+                                if (containsMouse)
+                                {
+                                    base.showTooltip(
+                                        base,
+                                        {x: 0, y: parent.mapToItem(base, 0, -parent.height / 2).y},
+                                        catalog.i18nc("@tooltip", "The colour of the material in this extruder.")
+                                    );
+                                }
+                                else
+                                {
+                                    base.hideTooltip();
+                                }
+                            }
+                        }
+                    }
+                    Label //Material name.
+                    {
+                        id: materialName
+                        text: (connectedPrinter != null && connectedPrinter.materialNames[index] != null && connectedPrinter.materialIds[index] != "") ? connectedPrinter.materialNames[index] : ""
+                        font: UM.Theme.getFont("default")
+                        color: UM.Theme.getColor("text")
+                        anchors.left: materialColor.right
+                        anchors.bottom: parent.bottom
+                        anchors.margins: UM.Theme.getSize("default_margin").width
+
+                        MouseArea //For tooltip.
+                        {
+                            id: materialNameTooltipArea
+                            hoverEnabled: true
+                            anchors.fill: parent
+                            onHoveredChanged:
+                            {
+                                if (containsMouse)
+                                {
+                                    base.showTooltip(
+                                        base,
+                                        {x: 0, y: parent.mapToItem(base, 0, 0).y},
+                                        catalog.i18nc("@tooltip", "The material in this extruder.")
+                                    );
+                                }
+                                else
+                                {
+                                    base.hideTooltip();
+                                }
+                            }
+                        }
+                    }
+                    Label //Variant name.
+                    {
+                        id: variantName
+                        text: (connectedPrinter != null && connectedPrinter.hotendIds[index] != null) ? connectedPrinter.hotendIds[index] : ""
+                        font: UM.Theme.getFont("default")
+                        color: UM.Theme.getColor("text")
+                        anchors.right: parent.right
+                        anchors.bottom: parent.bottom
+                        anchors.margins: UM.Theme.getSize("default_margin").width
+
+                        MouseArea //For tooltip.
+                        {
+                            id: variantNameTooltipArea
+                            hoverEnabled: true
+                            anchors.fill: parent
+                            onHoveredChanged:
+                            {
+                                if (containsMouse)
+                                {
+                                    base.showTooltip(
+                                        base,
+                                        {x: 0, y: parent.mapToItem(base, 0, -parent.height / 4).y},
+                                        catalog.i18nc("@tooltip", "The nozzle inserted in this extruder.")
+                                    );
+                                }
+                                else
+                                {
+                                    base.hideTooltip();
+                                }
+                            }
+                        }
+                    }
+                }
+            }
         }
     }
-    Repeater
+
+    Rectangle
     {
-        model: machineHeatedBed.properties.value == "True" ? 1 : 0
+        color: UM.Theme.getColor("sidebar_lining")
-        delegate: Loader
+        width: parent.width
+        height: UM.Theme.getSize("sidebar_lining_thin").width
+    }
+
+    Rectangle
+    {
+        color: UM.Theme.getColor("sidebar")
+        width: parent.width
+        height: machineHeatedBed.properties.value == "True" ? UM.Theme.getSize("sidebar_extruder_box").height : 0
+        visible: machineHeatedBed.properties.value == "True"
+
+        Label //Build plate label.
         {
-            sourceComponent: monitorItem
+            text: catalog.i18nc("@label", "Build plate")
-            property string label: catalog.i18nc("@label", "Build plate")
+            font: UM.Theme.getFont("default")
-            property string value: printerConnected ? Math.round(connectedPrinter.bedTemperature) + "°C" : ""
+            color: UM.Theme.getColor("text")
+            anchors.left: parent.left
+            anchors.top: parent.top
+            anchors.margins: UM.Theme.getSize("default_margin").width
         }
+        Label //Target temperature.
+        {
+            id: bedTargetTemperature
+            text: connectedPrinter != null ? connectedPrinter.targetBedTemperature + "°C" : ""
+            font: UM.Theme.getFont("small")
+            color: UM.Theme.getColor("text_inactive")
+            anchors.right: parent.right
+            anchors.rightMargin: UM.Theme.getSize("default_margin").width
+            anchors.bottom: bedCurrentTemperature.bottom
+
+            MouseArea //For tooltip.
+            {
+                id: bedTargetTemperatureTooltipArea
+                hoverEnabled: true
+                anchors.fill: parent
+                onHoveredChanged:
+                {
+                    if (containsMouse)
+                    {
+                        base.showTooltip(
+                            base,
+                            {x: 0, y: bedTargetTemperature.mapToItem(base, 0, -parent.height / 4).y},
+                            catalog.i18nc("@tooltip", "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off.")
+                        );
+                    }
+                    else
+                    {
+                        base.hideTooltip();
+                    }
+                }
+            }
+        }
+        Label //Current temperature.
+        {
+            id: bedCurrentTemperature
+            text: connectedPrinter != null ? connectedPrinter.bedTemperature + "°C" : ""
+            font: UM.Theme.getFont("large")
+            color: UM.Theme.getColor("text")
+            anchors.right: bedTargetTemperature.left
+            anchors.top: parent.top
+            anchors.margins: UM.Theme.getSize("default_margin").width
+
+            MouseArea //For tooltip.
+            {
+                id: bedTemperatureTooltipArea
+                hoverEnabled: true
+                anchors.fill: parent
+                onHoveredChanged:
+                {
+                    if (containsMouse)
+                    {
+                        base.showTooltip(
+                            base,
+                            {x: 0, y: bedCurrentTemperature.mapToItem(base, 0, -parent.height / 4).y},
+                            catalog.i18nc("@tooltip", "The current temperature of the heated bed.")
+                        );
+                    }
+                    else
+                    {
+                        base.hideTooltip();
+                    }
+                }
+            }
+        }
+        Rectangle //Input field for pre-heat temperature.
+        {
+            id: preheatTemperatureControl
+            color: !enabled ? UM.Theme.getColor("setting_control_disabled") : UM.Theme.getColor("setting_validation_ok")
+            enabled:
+            {
+                if (connectedPrinter == null)
+                {
+                    return false; //Can't preheat if not connected.
+                }
+                if (!connectedPrinter.acceptsCommands)
+                {
+                    return false; //Not allowed to do anything.
+                }
+                if (connectedPrinter.jobState == "printing" || connectedPrinter.jobState == "pre_print" || connectedPrinter.jobState == "resuming" || connectedPrinter.jobState == "pausing" || connectedPrinter.jobState == "paused" || connectedPrinter.jobState == "error" || connectedPrinter.jobState == "offline")
+                {
+                    return false; //Printer is in a state where it can't react to pre-heating.
+                }
+                return true;
+            }
+            border.width: UM.Theme.getSize("default_lining").width
+            border.color: !enabled ? UM.Theme.getColor("setting_control_disabled_border") : preheatTemperatureInputMouseArea.containsMouse ? UM.Theme.getColor("setting_control_border_highlight") : UM.Theme.getColor("setting_control_border")
+            anchors.left: parent.left
+            anchors.leftMargin: UM.Theme.getSize("default_margin").width
+            anchors.bottom: parent.bottom
+            anchors.bottomMargin: UM.Theme.getSize("default_margin").height
+            width: UM.Theme.getSize("setting_control").width
+            height: UM.Theme.getSize("setting_control").height
+
+            Rectangle //Highlight of input field.
+            {
+                anchors.fill: parent
+                anchors.margins: UM.Theme.getSize("default_lining").width
+                color: UM.Theme.getColor("setting_control_highlight")
+                opacity: preheatTemperatureControl.hovered ? 1.0 : 0
+            }
+            Label //Maximum temperature indication.
+            {
+                text: (bedTemperature.properties.maximum_value != "None" ? bedTemperature.properties.maximum_value : "") + "°C"
+                color: UM.Theme.getColor("setting_unit")
+                font: UM.Theme.getFont("default")
+                anchors.right: parent.right
+                anchors.rightMargin: UM.Theme.getSize("setting_unit_margin").width
+                anchors.verticalCenter: parent.verticalCenter
+            }
+            MouseArea //Change cursor on hovering.
+            {
+                id: preheatTemperatureInputMouseArea
+                hoverEnabled: true
+                anchors.fill: parent
+                cursorShape: Qt.IBeamCursor
+
+                onHoveredChanged:
+                {
+                    if (containsMouse)
+                    {
+                        base.showTooltip(
+                            base,
+                            {x: 0, y: preheatTemperatureInputMouseArea.mapToItem(base, 0, 0).y},
+                            catalog.i18nc("@tooltip of temperature input", "The temperature to pre-heat the bed to.")
+                        );
+                    }
+                    else
+                    {
+                        base.hideTooltip();
+                    }
+                }
+            }
+            TextInput
+            {
+                id: preheatTemperatureInput
+                font: UM.Theme.getFont("default")
+                color: !enabled ? UM.Theme.getColor("setting_control_disabled_text") : UM.Theme.getColor("setting_control_text")
+                selectByMouse: true
+                maximumLength: 10
+                enabled: parent.enabled
+                validator: RegExpValidator { regExp: /^-?[0-9]{0,9}[.,]?[0-9]{0,10}$/ } //Floating point regex.
+                anchors.left: parent.left
+                anchors.leftMargin: UM.Theme.getSize("setting_unit_margin").width
+                anchors.right: parent.right
+                anchors.verticalCenter: parent.verticalCenter
+
+                Component.onCompleted:
+                {
+                    if ((bedTemperature.resolve != "None" && bedTemperature.resolve) && (bedTemperature.stackLevels[0] != 0) && (bedTemperature.stackLevels[0] != 1))
+                    {
+                        // We have a resolve function. Indicates that the setting is not settable per extruder and that
+                        // we have to choose between the resolved value (default) and the global value
+                        // (if user has explicitly set this).
+                        text = bedTemperature.resolve;
+                    }
+                    else
+                    {
+                        text = bedTemperature.properties.value;
+                    }
+                }
+            }
+        }
+
+        UM.RecolorImage
+        {
+            id: preheatCountdownIcon
+            width: UM.Theme.getSize("save_button_specs_icons").width
+            height: UM.Theme.getSize("save_button_specs_icons").height
+            sourceSize.width: width
+            sourceSize.height: height
+            color: UM.Theme.getColor("text")
+            visible: preheatCountdown.visible
+            source: UM.Theme.getIcon("print_time")
+            anchors.right: preheatCountdown.left
+            anchors.rightMargin: UM.Theme.getSize("default_margin").width / 2
+            anchors.verticalCenter: preheatCountdown.verticalCenter
+        }
+
+        Timer
+        {
+            id: preheatUpdateTimer
+            interval: 100 //Update every 100ms. You want to update every 1s, but then you have one timer for the updating running out of sync with the actual date timer and you might skip seconds.
+            running: connectedPrinter != null && connectedPrinter.preheatBedRemainingTime != ""
+            repeat: true
+            onTriggered: update()
+            property var endTime: new Date() //Set initial endTime to be the current date, so that the endTime has initially already passed and the timer text becomes invisible if you were to update.
+            function update()
+            {
+                preheatCountdown.text = ""
+                if (connectedPrinter != null)
+                {
+                    preheatCountdown.text = connectedPrinter.preheatBedRemainingTime;
+                }
+                if (preheatCountdown.text == "") //Either time elapsed or not connected.
+                {
+                    stop();
+                }
+            }
+        }
+        Label
+        {
+            id: preheatCountdown
+            text: connectedPrinter != null ? connectedPrinter.preheatBedRemainingTime : ""
+            visible: text != "" //Has no direct effect, but just so that we can link visibility of clock icon to visibility of the countdown text.
+            font: UM.Theme.getFont("default")
+            color: UM.Theme.getColor("text")
+            anchors.right: preheatButton.left
+            anchors.rightMargin: UM.Theme.getSize("default_margin").width
+            anchors.verticalCenter: preheatButton.verticalCenter
+        }
+
+        Button //The pre-heat button.
+        {
+            id: preheatButton
+            height: UM.Theme.getSize("setting_control").height
+            enabled:
+            {
+                if (!preheatTemperatureControl.enabled)
+                {
+                    return false; //Not connected, not authenticated or printer is busy.
+                }
+                if (preheatUpdateTimer.running)
+                {
+                    return true; //Can always cancel if the timer is running.
+                }
+                if (bedTemperature.properties.minimum_value != "None" && parseInt(preheatTemperatureInput.text) < parseInt(bedTemperature.properties.minimum_value))
+                {
+                    return false; //Target temperature too low.
+                }
+                if (bedTemperature.properties.maximum_value != "None" && parseInt(preheatTemperatureInput.text) > parseInt(bedTemperature.properties.maximum_value))
+                {
+                    return false; //Target temperature too high.
+                }
+                if (parseInt(preheatTemperatureInput.text) == 0)
+                {
+                    return false; //Setting the temperature to 0 is not allowed (since that cancels the pre-heating).
+                }
+                return true; //Preconditions are met.
+            }
+            anchors.right: parent.right
+            anchors.bottom: parent.bottom
+            anchors.margins: UM.Theme.getSize("default_margin").width
+            style: ButtonStyle {
+                background: Rectangle
+                {
+                    border.width: UM.Theme.getSize("default_lining").width
+                    implicitWidth: actualLabel.contentWidth + (UM.Theme.getSize("default_margin").width * 2)
+                    border.color:
+                    {
+                        if(!control.enabled)
+                        {
+                            return UM.Theme.getColor("action_button_disabled_border");
+                        }
+                        else if(control.pressed)
+                        {
+                            return UM.Theme.getColor("action_button_active_border");
+                        }
+                        else if(control.hovered)
+                        {
+                            return UM.Theme.getColor("action_button_hovered_border");
+                        }
+                        else
+                        {
+                            return UM.Theme.getColor("action_button_border");
+                        }
+                    }
+                    color:
+                    {
+                        if(!control.enabled)
+                        {
+                            return UM.Theme.getColor("action_button_disabled");
+                        }
+                        else if(control.pressed)
+                        {
+                            return UM.Theme.getColor("action_button_active");
+                        }
+                        else if(control.hovered)
+                        {
+                            return UM.Theme.getColor("action_button_hovered");
+                        }
+                        else
+                        {
+                            return UM.Theme.getColor("action_button");
+                        }
+                    }
+                    Behavior on color
+                    {
+                        ColorAnimation
+                        {
+                            duration: 50
+                        }
+                    }
+
+                    Label
+                    {
+                        id: actualLabel
+                        anchors.centerIn: parent
+                        color:
+                        {
+                            if(!control.enabled)
+                            {
+                                return UM.Theme.getColor("action_button_disabled_text");
+                            }
+                            else if(control.pressed)
+                            {
+                                return UM.Theme.getColor("action_button_active_text");
+                            }
+                            else if(control.hovered)
+                            {
+                                return UM.Theme.getColor("action_button_hovered_text");
+                            }
+                            else
+                            {
+                                return UM.Theme.getColor("action_button_text");
+                            }
+                        }
+                        font: UM.Theme.getFont("action_button")
+                        text: preheatUpdateTimer.running ? catalog.i18nc("@button Cancel pre-heating", "Cancel") : catalog.i18nc("@button", "Pre-heat")
+                    }
+                }
+            }
+
+            onClicked:
+            {
+                if (!preheatUpdateTimer.running)
+                {
+                    connectedPrinter.preheatBed(preheatTemperatureInput.text, connectedPrinter.preheatBedTimeout);
+                    preheatUpdateTimer.start();
+                    preheatUpdateTimer.update(); //Update once before the first timer is triggered.
+                }
+                else
+                {
+                    connectedPrinter.cancelPreheatBed();
+                    preheatUpdateTimer.update();
+                }
+            }
+
+            onHoveredChanged:
+            {
+                if (hovered)
+                {
+                    base.showTooltip(
+                        base,
+                        {x: 0, y: preheatButton.mapToItem(base, 0, 0).y},
+                        catalog.i18nc("@tooltip of pre-heat", "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print.")
+                    );
+                }
+                else
+                {
+                    base.hideTooltip();
+                }
+            }
+        }
+    }
+
+    UM.SettingPropertyProvider
+    {
+        id: bedTemperature
+        containerStackId: Cura.MachineManager.activeMachineId
+        key: "material_bed_temperature"
+        watchedProperties: ["value", "minimum_value", "maximum_value", "resolve"]
+        storeIndex: 0
+
+        property var resolve: Cura.MachineManager.activeStackId != Cura.MachineManager.activeMachineId ? properties.resolve : "None"
+    }
+
+    UM.SettingPropertyProvider
+    {
+        id: machineExtruderCount
+        containerStackId: Cura.MachineManager.activeMachineId
+        key: "machine_extruder_count"
+        watchedProperties: ["value"]
     }
 
     Loader
@@ -72,19 +636,19 @@ Column
     {
         sourceComponent: monitorItem
         property string label: catalog.i18nc("@label", "Job Name")
-        property string value: printerConnected ? connectedPrinter.jobName : ""
+        property string value: connectedPrinter != null ? connectedPrinter.jobName : ""
     }
     Loader
     {
         sourceComponent: monitorItem
         property string label: catalog.i18nc("@label", "Printing Time")
-        property string value: printerConnected ? getPrettyTime(connectedPrinter.timeTotal) : ""
+        property string value: connectedPrinter != null ? getPrettyTime(connectedPrinter.timeTotal) : ""
     }
     Loader
     {
         sourceComponent: monitorItem
         property string label: catalog.i18nc("@label", "Estimated time left")
-        property string value: printerConnected ? getPrettyTime(connectedPrinter.timeTotal - connectedPrinter.timeElapsed) : ""
+        property string value: connectedPrinter != null ? getPrettyTime(connectedPrinter.timeTotal - connectedPrinter.timeElapsed) : ""
     }
 
     Component
@@ -103,7 +667,7 @@ Column
                 width: parent.width * 0.4
                 anchors.verticalCenter: parent.verticalCenter
                 text: label
-                color: printerConnected && printerAcceptsCommands ? UM.Theme.getColor("setting_control_text") : UM.Theme.getColor("setting_control_disabled_text")
+                color: connectedPrinter != null && connectedPrinter.acceptsCommands ? UM.Theme.getColor("setting_control_text") : UM.Theme.getColor("setting_control_disabled_text")
                 font: UM.Theme.getFont("default")
                 elide: Text.ElideRight
             }
@@ -112,7 +676,7 @@ Column
                 width: parent.width * 0.6
                 anchors.verticalCenter: parent.verticalCenter
                 text: value
-                color: printerConnected && printerAcceptsCommands ? UM.Theme.getColor("setting_control_text") : UM.Theme.getColor("setting_control_disabled_text")
+                color: connectedPrinter != null && connectedPrinter.acceptsCommands ? UM.Theme.getColor("setting_control_text") : UM.Theme.getColor("setting_control_disabled_text")
                 font: UM.Theme.getFont("default")
                 elide: Text.ElideRight
             }
@@ -125,7 +689,7 @@ Column
         Rectangle
         {
             color: UM.Theme.getColor("setting_category")
-            width: base.width - 2 * UM.Theme.getSize("default_margin").width
+            width: base.width
             height: UM.Theme.getSize("section").height
 
             Label

resources/qml/SaveButton.qml

@@ -14,7 +14,10 @@ Item {
 
     property real progress: UM.Backend.progress;
     property int backendState: UM.Backend.state;
-    property bool activity: Printer.getPlatformActivity;
+
+    property var backend: CuraApplication.getBackend();
+    property bool activity: Printer.platformActivity;
+
     property int totalHeight: childrenRect.height + UM.Theme.getSize("default_margin").height
     property string fileBaseName
     property string statusText:
@@ -27,7 +30,7 @@ Item {
         switch(base.backendState)
         {
             case 1:
-                return catalog.i18nc("@label:PrintjobStatus", "Preparing to slice...");
+                return catalog.i18nc("@label:PrintjobStatus", "Ready to slice");
             case 2:
                 return catalog.i18nc("@label:PrintjobStatus", "Slicing...");
             case 3:
@@ -102,11 +105,107 @@ Item {
             }
         }
 
+        Connections {
+            target: UM.Preferences
+            onPreferenceChanged:
+            {
+                var autoSlice = UM.Preferences.getValue("general/auto_slice");
+                prepareButton.autoSlice = autoSlice;
+                saveToButton.autoSlice = autoSlice;
+            }
+        }
+
+        // Prepare button, only shows if auto_slice is off
+        Button {
+            id: prepareButton
+
+            tooltip: UM.OutputDeviceManager.activeDeviceDescription;
+            // 1 = not started, 2 = Processing
+            enabled: (base.backendState == 1 || base.backendState == 2) && base.activity == true
+            visible: {
+                return !autoSlice && (base.backendState == 1 || base.backendState == 2) && base.activity == true;
+                }
+            property bool autoSlice
+            height: UM.Theme.getSize("save_button_save_to_button").height
+
+            anchors.top: parent.top
+            anchors.right: parent.right
+            anchors.rightMargin: UM.Theme.getSize("default_margin").width
+
+            // 1 = not started, 5 = disabled
+            text: [1, 5].indexOf(UM.Backend.state) != -1 ? catalog.i18nc("@label:Printjob", "Prepare") : catalog.i18nc("@label:Printjob", "Cancel")
+            onClicked:
+            {
+                if ([1, 5].indexOf(UM.Backend.state) != -1) {
+                    backend.forceSlice();
+                } else {
+                    backend.stopSlicing();
+                }
+            }
+
+            style: ButtonStyle {
+                background: Rectangle
+                {
+                    border.width: UM.Theme.getSize("default_lining").width
+                    border.color:
+                    {
+                        if(!control.enabled)
+                            return UM.Theme.getColor("action_button_disabled_border");
+                        else if(control.pressed)
+                            return UM.Theme.getColor("action_button_active_border");
+                        else if(control.hovered)
+                            return UM.Theme.getColor("action_button_hovered_border");
+                        else
+                            return UM.Theme.getColor("action_button_border");
+                    }
+                    color:
+                    {
+                        if(!control.enabled)
+                            return UM.Theme.getColor("action_button_disabled");
+                        else if(control.pressed)
+                            return UM.Theme.getColor("action_button_active");
+                        else if(control.hovered)
+                            return UM.Theme.getColor("action_button_hovered");
+                        else
+                            return UM.Theme.getColor("action_button");
+                    }
+
+                    Behavior on color { ColorAnimation { duration: 50; } }
+
+                    implicitWidth: actualLabel.contentWidth + (UM.Theme.getSize("default_margin").width * 2)
+
+                    Label {
+                        id: actualLabel
+                        anchors.centerIn: parent
+                        color:
+                        {
+                            if(!control.enabled)
+                                return UM.Theme.getColor("action_button_disabled_text");
+                            else if(control.pressed)
+                                return UM.Theme.getColor("action_button_active_text");
+                            else if(control.hovered)
+                                return UM.Theme.getColor("action_button_hovered_text");
+                            else
+                                return UM.Theme.getColor("action_button_text");
+                        }
+                        font: UM.Theme.getFont("action_button")
+                        text: control.text;
+                    }
+                }
+                label: Item { }
+            }
+        }
+
         Button {
             id: saveToButton
 
             tooltip: UM.OutputDeviceManager.activeDeviceDescription;
+            // 3 = done, 5 = disabled
             enabled: (base.backendState == 3 || base.backendState == 5) && base.activity == true
+            visible: {
+                return autoSlice || ((base.backendState == 3 || base.backendState == 5) && base.activity == true);
+            }
+            property bool autoSlice
             height: UM.Theme.getSize("save_button_save_to_button").height
 
             anchors.top: parent.top
@@ -181,8 +280,9 @@ Item {
             anchors.rightMargin: UM.Theme.getSize("default_margin").width
             width: UM.Theme.getSize("save_button_save_to_button").height
             height: UM.Theme.getSize("save_button_save_to_button").height
+            // 3 = Done, 5 = Disabled
             enabled: (base.backendState == 3 || base.backendState == 5) && base.activity == true
-            visible: devicesModel.deviceCount > 1
+            visible: (devicesModel.deviceCount > 1) && (base.backendState == 3 || base.backendState == 5) && base.activity == true
 
 
             style: ButtonStyle {

resources/qml/Sidebar.qml

@@ -1,4 +1,4 @@
-// Copyright (c) 2015 Ultimaker B.V.
+// Copyright (c) 2017 Ultimaker B.V.
 // Cura is released under the terms of the AGPLv3 or higher.
 
 import QtQuick 2.2
@@ -15,7 +15,7 @@ Rectangle
     id: base;
 
     property int currentModeIndex;
-    property bool monitoringPrint: false
+    property bool monitoringPrint: false;  // When adding more "tabs", one want to replace this bool with a ListModel
     property bool hideSettings: PrintInformation.preSliced
     Connections
     {
@@ -31,6 +31,7 @@ Rectangle
     // Is there an output device for this printer?
     property bool printerConnected: Cura.MachineManager.printerOutputDevices.length != 0
     property bool printerAcceptsCommands: printerConnected && Cura.MachineManager.printerOutputDevices[0].acceptsCommands
+    property int backendState: UM.Backend.state;
 
     color: UM.Theme.getColor("sidebar")
     UM.I18nCatalog { id: catalog; name:"cura"}
@@ -455,19 +456,6 @@ Rectangle
         }
     }
 
-    Label {
-        id: monitorLabel
-        text: catalog.i18nc("@label","Printer Monitor");
-        anchors.left: parent.left
-        anchors.leftMargin: UM.Theme.getSize("default_margin").width;
-        anchors.top: headerSeparator.bottom
-        anchors.topMargin: UM.Theme.getSize("default_margin").height
-        width: parent.width * 0.45
-        font: UM.Theme.getFont("large")
-        color: UM.Theme.getColor("text")
-        visible: monitoringPrint
-    }
-
     StackView
     {
         id: sidebarContents
@@ -511,10 +499,8 @@ Rectangle
     Loader
     {
         anchors.bottom: footerSeparator.top
-        anchors.top: monitorLabel.bottom
+        anchors.top: headerSeparator.bottom
-        anchors.topMargin: UM.Theme.getSize("default_margin").height
         anchors.left: base.left
-        anchors.leftMargin: UM.Theme.getSize("default_margin").width
         anchors.right: base.right
         source: monitoringPrint ? "PrintMonitor.qml": "SidebarContents.qml"
    }
@@ -529,6 +515,8 @@ Rectangle
         anchors.bottomMargin: UM.Theme.getSize("default_margin").height
     }
 
+    // SaveButton and MonitorButton are actually the bottom footer panels.
+    // "!monitoringPrint" currently means "show-settings-mode"
     SaveButton
     {
         id: saveButton
@@ -553,6 +541,7 @@ Rectangle
         id: tooltip;
     }
 
+    // Setting mode: Recommended or Custom
     ListModel
     {
         id: modesListModel;

resources/qml/SidebarSimple.qml

@@ -398,7 +398,7 @@ Item
             style: UM.Theme.styles.checkbox;
             enabled: base.settingsEnabled
 
-            checked: platformAdhesionType.properties.value != "skirt"
+            checked: platformAdhesionType.properties.value != "skirt" && platformAdhesionType.properties.value != "none"
 
             MouseArea
             {

resources/quality/abax_pri3/apri3_pla_fast.inst.cfg

@@ -0,0 +1,22 @@
+
+[general]
+version = 2
+name = Normal Quality
+definition = abax_pri3
+
+[metadata]
+type = quality
+material = generic_pla
+weight = 0
+quality_type = normal
+
+[values]
+layer_height = 0.2
+wall_thickness = 1.05
+top_bottom_thickness = 0.8
+infill_sparse_density = 20
+speed_print = 80
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_topbottom = 20
+cool_min_layer_time = 5
+cool_min_speed = 10

resources/quality/abax_pri3/apri3_pla_high.inst.cfg

@@ -0,0 +1,22 @@
+
+[general]
+version = 2
+name = High Quality
+definition = abax_pri3
+
+[metadata]
+type = quality
+material = generic_pla
+weight = 1
+quality_type = high
+
+[values]
+layer_height = 0.1
+wall_thickness = 1.05
+top_bottom_thickness = 0.8
+infill_sparse_density = 20
+speed_print = 50
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_topbottom = 20
+cool_min_layer_time = 5
+cool_min_speed = 10

resources/quality/abax_pri3/apri3_pla_normal.inst.cfg

@@ -0,0 +1,22 @@
+
+[general]
+version = 2
+name = Normal Quality
+definition = abax_pri3
+
+[metadata]
+type = quality
+material = generic_pla
+weight = 0
+quality_type = normal
+
+[values]
+layer_height = 0.2
+wall_thickness = 1.05
+top_bottom_thickness = 0.8
+infill_sparse_density = 20
+speed_print = 50
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_topbottom = 20
+cool_min_layer_time = 5
+cool_min_speed = 10

resources/quality/abax_pri5/apri5_pla_fast.inst.cfg

@@ -0,0 +1,22 @@
+
+[general]
+version = 2
+name = Normal Quality
+definition = abax_pri5
+
+[metadata]
+type = quality
+material = generic_pla
+weight = 0
+quality_type = normal
+
+[values]
+layer_height = 0.2
+wall_thickness = 1.05
+top_bottom_thickness = 0.8
+infill_sparse_density = 20
+speed_print = 80
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_topbottom = 20
+cool_min_layer_time = 5
+cool_min_speed = 10