diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json index 655ff0e4ec..fe1ba52ff0 100644 --- a/resources/definitions/ultimaker.def.json +++ b/resources/definitions/ultimaker.def.json @@ -111,6 +111,7 @@ "speed_layer_0": { "value": "min(30, layer_height / layer_height_0 * speed_wall_0)" }, "speed_slowdown_layers": { "value": 1 }, "speed_travel_layer_0": { "value": "speed_travel" }, + "support_brim_enable": { "value": "True" }, "support_infill_rate": { "value": "0 if support_structure == 'tree' else 80 if gradual_support_infill_steps != 0 else 15" }, "support_initial_layer_line_distance": { "minimum_value_warning": "0 if support_structure == 'tree' else support_line_width" }, "support_interface_height": { "value": "2 * layer_height" }, diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg index 480c8fa090..ff204a452d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg @@ -23,7 +23,6 @@ speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height -support_brim_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg index c9c26ade18..07035296e1 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg @@ -22,7 +22,6 @@ speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height -support_brim_enable = True support_infill_sparse_thickness = =2*layer_height support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg index bccbd8b063..3e6ab7099e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg @@ -19,7 +19,6 @@ prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 10 support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height -support_brim_enable = True support_infill_sparse_thickness = =2*layer_height support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg index 5a0e2d20cb..16ff1df884 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg @@ -19,6 +19,5 @@ prime_tower_enable = False retraction_count_max = 5 skin_overlap = 20 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) -support_brim_enable = True support_interface_enable = True diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg index 78d3f70cfe..7da1abbd2e 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg @@ -19,7 +19,6 @@ prime_tower_enable = False retraction_count_max = 5 skin_overlap = 15 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) -support_brim_enable = True support_infill_sparse_thickness = =2*layer_height support_interface_enable = True diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg index 1833790825..2683d91c73 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg @@ -17,7 +17,6 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) -support_brim_enable = True support_infill_sparse_thickness = =3*layer_height support_interface_enable = True diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg index 11e18722dd..b54fd2ec9f 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg @@ -17,7 +17,6 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) -support_brim_enable = True support_infill_sparse_thickness = =2*layer_height support_interface_enable = True diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg index 046f49887e..801364c379 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg @@ -17,6 +17,5 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru material_print_temperature = =default_material_print_temperature + 5 retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) -support_brim_enable = True support_interface_enable = True diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg index e6a616150e..3508386da6 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg @@ -16,6 +16,5 @@ brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) -support_brim_enable = True support_interface_enable = True diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg index e5d469ae21..2673a61bc2 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg @@ -16,6 +16,5 @@ brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) -support_brim_enable = True support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg index 2c7adc4e88..7f7ce91722 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg @@ -22,7 +22,6 @@ speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height -support_brim_enable = True support_infill_sparse_thickness = =2 * layer_height support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg index 647523cbf0..3bcec88290 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg @@ -19,7 +19,6 @@ prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 10 support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height -support_brim_enable = True support_infill_sparse_thickness = =2 * layer_height support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg index 179cfb7d04..60de541b7f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg @@ -23,7 +23,6 @@ speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height -support_brim_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg index 1b26bafaf4..ddd659afe0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg @@ -24,7 +24,6 @@ speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) support_angle = 45 support_bottom_distance = 0.3 -support_brim_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True support_top_distance = 0.3 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg index 0663d89fec..73af8bb5dd 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg @@ -17,7 +17,6 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) -support_brim_enable = True support_infill_sparse_thickness = =3 * layer_height support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg index fb5c2d273d..58608d0abb 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg @@ -19,7 +19,6 @@ prime_tower_enable = False retraction_count_max = 5 skin_overlap = 15 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) -support_brim_enable = True support_infill_sparse_thickness = =2 * layer_height support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg index 18dfbd7fa2..cb443e030f 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg @@ -17,7 +17,6 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) -support_brim_enable = True support_infill_sparse_thickness = =2 * layer_height support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg index a15847a5a5..694725c8d5 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg @@ -19,6 +19,5 @@ prime_tower_enable = False retraction_count_max = 5 skin_overlap = 20 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) -support_brim_enable = True support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.3mm.inst.cfg index 05308cc369..62edb18d50 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.3mm.inst.cfg @@ -17,7 +17,6 @@ brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) -support_brim_enable = True support_infill_sparse_thickness = 0.3 support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.2mm.inst.cfg index 8b19eeb89b..61d22b4bc0 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.2mm.inst.cfg @@ -17,6 +17,5 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru material_print_temperature = =default_material_print_temperature + 5 retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) -support_brim_enable = True support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.3mm.inst.cfg index 1518ed0335..06c2666a71 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.3mm.inst.cfg @@ -16,7 +16,6 @@ brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) -support_brim_enable = True support_infill_sparse_thickness = 0.3 support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.4mm.inst.cfg index 38a11076a3..19dcfb82b8 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.4mm.inst.cfg @@ -16,6 +16,5 @@ brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) -support_brim_enable = True support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg index d2c64fef36..76f078dae0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg @@ -22,7 +22,6 @@ speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height -support_brim_enable = True support_infill_sparse_thickness = =2 * layer_height support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg index e57eafbd48..ee599fd6f3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg @@ -19,7 +19,6 @@ prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 10 support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height -support_brim_enable = True support_infill_sparse_thickness = =2 * layer_height support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg index 4d629d99c9..153ea699cb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg @@ -23,7 +23,6 @@ speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height -support_brim_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg index 77347e56c2..fde3f8ef16 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg @@ -24,7 +24,6 @@ speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) support_angle = 45 support_bottom_distance = 0.3 -support_brim_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True support_top_distance = 0.3 diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg index dc224b65b4..048c0e030f 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg @@ -17,7 +17,6 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) -support_brim_enable = True support_infill_sparse_thickness = =3 * layer_height support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg index 994c0e818d..5e25d29e10 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg @@ -19,7 +19,6 @@ prime_tower_enable = False retraction_count_max = 5 skin_overlap = 15 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) -support_brim_enable = True support_infill_sparse_thickness = =2 * layer_height support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg index 7d0fb3f53f..0e475a0fa8 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg @@ -17,7 +17,6 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) -support_brim_enable = True support_infill_sparse_thickness = =2 * layer_height support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg index c27642a783..8528da96f5 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg @@ -19,6 +19,5 @@ prime_tower_enable = False retraction_count_max = 5 skin_overlap = 20 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) -support_brim_enable = True support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg index ace2f47c14..925bf152a3 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg @@ -18,7 +18,6 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) -support_brim_enable = True support_infill_sparse_thickness = 0.3 support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.2mm.inst.cfg index 3263d763c5..c2e81fb6e0 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.2mm.inst.cfg @@ -17,6 +17,5 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru material_print_temperature = =default_material_print_temperature + 5 retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) -support_brim_enable = True support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.3mm.inst.cfg index 6a80ad401c..8cf7c9a0dc 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.3mm.inst.cfg @@ -16,7 +16,6 @@ brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) -support_brim_enable = True support_infill_sparse_thickness = 0.3 support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.4mm.inst.cfg index 61215c4e85..9e9eb537e1 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.4mm.inst.cfg @@ -16,6 +16,5 @@ brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) -support_brim_enable = True support_interface_enable = True