From b225cb5c3458767dda11a9ef51b265a28fc5ff50 Mon Sep 17 00:00:00 2001 From: Tim Kuipers Date: Wed, 2 Mar 2016 11:02:13 +0100 Subject: [PATCH 1/7] profiles: fix: skin_no_small_skin_heuristic not set anymore in profiles, but now defaults to fdmPrinter default (TRUE) (CURA-983) --- resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.4_high.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile | 1 - resources/profiles/ultimaker2+/pla_0.25_normal.curaprofile | 1 - resources/profiles/ultimaker2+/pla_0.4_fast.curaprofile | 1 - resources/profiles/ultimaker2+/pla_0.4_high.curaprofile | 1 - resources/profiles/ultimaker2+/pla_0.4_normal.curaprofile | 1 - resources/profiles/ultimaker2+/pla_0.4_ulti.curaprofile | 1 - resources/profiles/ultimaker2+/pla_0.6_normal.curaprofile | 1 - resources/profiles/ultimaker2+/pla_0.8_normal.curaprofile | 1 - resources/profiles/ultimaker2_olsson/0.25_normal.curaprofile | 1 - resources/profiles/ultimaker2_olsson/0.4_fast.curaprofile | 1 - resources/profiles/ultimaker2_olsson/0.4_high.curaprofile | 1 - resources/profiles/ultimaker2_olsson/0.4_normal.curaprofile | 1 - resources/profiles/ultimaker2_olsson/0.4_ulti.curaprofile | 1 - resources/profiles/ultimaker2_olsson/0.6_normal.curaprofile | 1 - resources/profiles/ultimaker2_olsson/0.8_normal.curaprofile | 1 - 26 files changed, 26 deletions(-) diff --git a/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile index 4554e0aba5..a18bf4ea34 100644 --- a/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile @@ -27,7 +27,6 @@ speed_topbottom = 20 speed_infill = 30 infill_before_walls = False retraction_speed = 40.0 -skin_no_small_gaps_heuristic = False infill_sparse_density = 22 shell_thickness = 0.88 cool_fan_speed_max = 100 diff --git a/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile index 0c6a2fb79e..44a9ace179 100644 --- a/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile @@ -28,7 +28,6 @@ speed_topbottom = 30 speed_infill = 55 infill_before_walls = False retraction_speed = 40.0 -skin_no_small_gaps_heuristic = False infill_sparse_density = 18 shell_thickness = 0.7 cool_fan_speed_max = 100 diff --git a/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile index 55eae0a8f4..4477592e57 100644 --- a/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile @@ -27,7 +27,6 @@ speed_topbottom = 20 speed_infill = 45 infill_before_walls = False retraction_speed = 40.0 -skin_no_small_gaps_heuristic = False infill_sparse_density = 22 shell_thickness = 1.05 cool_fan_speed_max = 100 diff --git a/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile index 627f22aa61..9126e936e1 100644 --- a/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile @@ -24,7 +24,6 @@ speed_topbottom = 20 speed_infill = 45 infill_before_walls = False retraction_speed = 40.0 -skin_no_small_gaps_heuristic = False shell_thickness = 1.05 cool_fan_speed_max = 100 raft_airgap = 0.0 diff --git a/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile index 54904f0e2d..3a2fbb815e 100644 --- a/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile @@ -27,7 +27,6 @@ speed_topbottom = 20 speed_infill = 55 infill_before_walls = False retraction_speed = 40.0 -skin_no_small_gaps_heuristic = False shell_thickness = 1.59 cool_fan_speed_max = 100 raft_airgap = 0.0 diff --git a/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile index 42addb54bb..3c6ef7f7e9 100644 --- a/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile @@ -27,7 +27,6 @@ speed_topbottom = 20 speed_infill = 40 infill_before_walls = False retraction_speed = 40.0 -skin_no_small_gaps_heuristic = False shell_thickness = 2.1 cool_fan_speed_max = 100 raft_airgap = 0.0 diff --git a/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile index 772d519e69..beef7f3490 100644 --- a/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile @@ -12,7 +12,6 @@ support_enable = False raft_airgap = 0.0 raft_surface_thickness = 0.27 raft_interface_line_spacing = 3.0 -skin_no_small_gaps_heuristic = False bottom_thickness = 0.72 raft_surface_line_spacing = 3.0 retraction_combing = All diff --git a/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile index f484beaf30..37885d9235 100644 --- a/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile @@ -8,7 +8,6 @@ material = CPE [settings] cool_fan_speed_min = 50 retraction_hop = 0.0 -skin_no_small_gaps_heuristic = False raft_airgap = 0.0 speed_travel = 150 raft_surface_thickness = 0.27 diff --git a/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile index 0ca6bdca19..10e8252915 100644 --- a/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile @@ -12,7 +12,6 @@ support_enable = False raft_airgap = 0.0 raft_surface_thickness = 0.27 raft_interface_line_spacing = 3.0 -skin_no_small_gaps_heuristic = False bottom_thickness = 0.72 raft_surface_line_spacing = 3.0 retraction_combing = All diff --git a/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile index 340ded170e..cfd3477f88 100644 --- a/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile @@ -12,7 +12,6 @@ raft_airgap = 0.0 raft_surface_thickness = 0.27 support_pattern = lines raft_interface_line_spacing = 3.0 -skin_no_small_gaps_heuristic = False raft_surface_line_width = 0.4 cool_fan_speed_min = 50 retraction_combing = All diff --git a/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile index d1b26b64e8..b3d19baa9e 100644 --- a/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile @@ -12,7 +12,6 @@ support_enable = False raft_airgap = 0.0 raft_surface_thickness = 0.27 raft_interface_line_spacing = 3.0 -skin_no_small_gaps_heuristic = False bottom_thickness = 1.2 support_pattern = lines retraction_combing = All diff --git a/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile index 9497120a63..b0bcdceac2 100644 --- a/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile @@ -12,7 +12,6 @@ support_enable = False raft_airgap = 0.0 raft_surface_thickness = 0.27 raft_interface_line_spacing = 3.0 -skin_no_small_gaps_heuristic = False bottom_thickness = 1.2 support_pattern = lines retraction_combing = All diff --git a/resources/profiles/ultimaker2+/pla_0.25_normal.curaprofile b/resources/profiles/ultimaker2+/pla_0.25_normal.curaprofile index 069f964e4d..31e2b5da88 100644 --- a/resources/profiles/ultimaker2+/pla_0.25_normal.curaprofile +++ b/resources/profiles/ultimaker2+/pla_0.25_normal.curaprofile @@ -12,7 +12,6 @@ layer_height_0 = 0.15 shell_thickness = 0.88 top_bottom_thickness = 0.72 travel_compensate_overlapping_walls_enabled = True -skin_no_small_gaps_heuristic = False top_bottom_pattern = lines infill_sparse_density = 22 infill_wipe_dist = 0.1 diff --git a/resources/profiles/ultimaker2+/pla_0.4_fast.curaprofile b/resources/profiles/ultimaker2+/pla_0.4_fast.curaprofile index 870f8da6ed..62abae9dd2 100644 --- a/resources/profiles/ultimaker2+/pla_0.4_fast.curaprofile +++ b/resources/profiles/ultimaker2+/pla_0.4_fast.curaprofile @@ -12,7 +12,6 @@ layer_height_0 = 0.26 shell_thickness = 0.7 top_bottom_thickness = 0.6 travel_compensate_overlapping_walls_enabled = True -skin_no_small_gaps_heuristic = False top_bottom_pattern = lines infill_sparse_density = 18 infill_wipe_dist = 0.2 diff --git a/resources/profiles/ultimaker2+/pla_0.4_high.curaprofile b/resources/profiles/ultimaker2+/pla_0.4_high.curaprofile index a2a89d897f..de38624a1e 100644 --- a/resources/profiles/ultimaker2+/pla_0.4_high.curaprofile +++ b/resources/profiles/ultimaker2+/pla_0.4_high.curaprofile @@ -12,7 +12,6 @@ layer_height_0 = 0.26 shell_thickness = 1.05 top_bottom_thickness = 0.84 travel_compensate_overlapping_walls_enabled = True -skin_no_small_gaps_heuristic = False top_bottom_pattern = lines infill_sparse_density = 22 infill_wipe_dist = 0.2 diff --git a/resources/profiles/ultimaker2+/pla_0.4_normal.curaprofile b/resources/profiles/ultimaker2+/pla_0.4_normal.curaprofile index 54dedd578d..20a4c5e002 100644 --- a/resources/profiles/ultimaker2+/pla_0.4_normal.curaprofile +++ b/resources/profiles/ultimaker2+/pla_0.4_normal.curaprofile @@ -12,7 +12,6 @@ layer_height_0 = 0.26 shell_thickness = 1.05 top_bottom_thickness = 0.8 travel_compensate_overlapping_walls_enabled = True -skin_no_small_gaps_heuristic = False top_bottom_pattern = lines infill_sparse_density = 20 infill_wipe_dist = 0.2 diff --git a/resources/profiles/ultimaker2+/pla_0.4_ulti.curaprofile b/resources/profiles/ultimaker2+/pla_0.4_ulti.curaprofile index eccc14ecff..bce7a83a87 100644 --- a/resources/profiles/ultimaker2+/pla_0.4_ulti.curaprofile +++ b/resources/profiles/ultimaker2+/pla_0.4_ulti.curaprofile @@ -12,7 +12,6 @@ layer_height_0 = 0.26 shell_thickness = 1.4 top_bottom_thickness = 1.12 travel_compensate_overlapping_walls_enabled = True -skin_no_small_gaps_heuristic = False top_bottom_pattern = lines infill_sparse_density = 25 infill_wipe_dist = 0.2 diff --git a/resources/profiles/ultimaker2+/pla_0.6_normal.curaprofile b/resources/profiles/ultimaker2+/pla_0.6_normal.curaprofile index 6a5f4033b1..f006c958c8 100644 --- a/resources/profiles/ultimaker2+/pla_0.6_normal.curaprofile +++ b/resources/profiles/ultimaker2+/pla_0.6_normal.curaprofile @@ -12,7 +12,6 @@ layer_height_0 = 0.4 shell_thickness = 1.59 top_bottom_thickness = 1.2 travel_compensate_overlapping_walls_enabled = True -skin_no_small_gaps_heuristic = False top_bottom_pattern = lines infill_sparse_density = 20 infill_wipe_dist = 0.3 diff --git a/resources/profiles/ultimaker2+/pla_0.8_normal.curaprofile b/resources/profiles/ultimaker2+/pla_0.8_normal.curaprofile index fe454b5c32..5c63cf0d7f 100644 --- a/resources/profiles/ultimaker2+/pla_0.8_normal.curaprofile +++ b/resources/profiles/ultimaker2+/pla_0.8_normal.curaprofile @@ -12,7 +12,6 @@ layer_height_0 = 0.5 shell_thickness = 2.1 top_bottom_thickness = 1.6 travel_compensate_overlapping_walls_enabled = True -skin_no_small_gaps_heuristic = False top_bottom_pattern = lines infill_sparse_density = 20 infill_wipe_dist = 0.4 diff --git a/resources/profiles/ultimaker2_olsson/0.25_normal.curaprofile b/resources/profiles/ultimaker2_olsson/0.25_normal.curaprofile index 86db0cbd22..45e4a4a26a 100644 --- a/resources/profiles/ultimaker2_olsson/0.25_normal.curaprofile +++ b/resources/profiles/ultimaker2_olsson/0.25_normal.curaprofile @@ -11,7 +11,6 @@ layer_height_0 = 0.15 shell_thickness = 0.88 top_bottom_thickness = 0.72 travel_compensate_overlapping_walls_enabled = True -skin_no_small_gaps_heuristic = False top_bottom_pattern = lines infill_sparse_density = 22 infill_overlap = 0.022 diff --git a/resources/profiles/ultimaker2_olsson/0.4_fast.curaprofile b/resources/profiles/ultimaker2_olsson/0.4_fast.curaprofile index 6511f2ada8..815c6a74e2 100644 --- a/resources/profiles/ultimaker2_olsson/0.4_fast.curaprofile +++ b/resources/profiles/ultimaker2_olsson/0.4_fast.curaprofile @@ -11,7 +11,6 @@ layer_height_0 = 0.26 shell_thickness = 0.7 top_bottom_thickness = 0.6 travel_compensate_overlapping_walls_enabled = True -skin_no_small_gaps_heuristic = False top_bottom_pattern = lines infill_sparse_density = 18 infill_overlap = 0.035 diff --git a/resources/profiles/ultimaker2_olsson/0.4_high.curaprofile b/resources/profiles/ultimaker2_olsson/0.4_high.curaprofile index 33be857fb7..f1b5234698 100644 --- a/resources/profiles/ultimaker2_olsson/0.4_high.curaprofile +++ b/resources/profiles/ultimaker2_olsson/0.4_high.curaprofile @@ -11,7 +11,6 @@ layer_height_0 = 0.26 shell_thickness = 1.05 top_bottom_thickness = 0.84 travel_compensate_overlapping_walls_enabled = True -skin_no_small_gaps_heuristic = False top_bottom_pattern = lines infill_sparse_density = 22 infill_overlap = 0.035 diff --git a/resources/profiles/ultimaker2_olsson/0.4_normal.curaprofile b/resources/profiles/ultimaker2_olsson/0.4_normal.curaprofile index 90fcf9e49c..a7f5687ce5 100644 --- a/resources/profiles/ultimaker2_olsson/0.4_normal.curaprofile +++ b/resources/profiles/ultimaker2_olsson/0.4_normal.curaprofile @@ -11,7 +11,6 @@ layer_height_0 = 0.26 shell_thickness = 1.05 top_bottom_thickness = 0.8 travel_compensate_overlapping_walls_enabled = True -skin_no_small_gaps_heuristic = False top_bottom_pattern = lines infill_sparse_density = 20 infill_overlap = 0.035 diff --git a/resources/profiles/ultimaker2_olsson/0.4_ulti.curaprofile b/resources/profiles/ultimaker2_olsson/0.4_ulti.curaprofile index 0181bc0bdf..0d37690391 100644 --- a/resources/profiles/ultimaker2_olsson/0.4_ulti.curaprofile +++ b/resources/profiles/ultimaker2_olsson/0.4_ulti.curaprofile @@ -11,7 +11,6 @@ layer_height_0 = 0.26 shell_thickness = 1.4 top_bottom_thickness = 1.12 travel_compensate_overlapping_walls_enabled = True -skin_no_small_gaps_heuristic = False top_bottom_pattern = lines infill_sparse_density = 25 infill_overlap = 0.035 diff --git a/resources/profiles/ultimaker2_olsson/0.6_normal.curaprofile b/resources/profiles/ultimaker2_olsson/0.6_normal.curaprofile index e52ae2c9b8..1ef68752ac 100644 --- a/resources/profiles/ultimaker2_olsson/0.6_normal.curaprofile +++ b/resources/profiles/ultimaker2_olsson/0.6_normal.curaprofile @@ -11,7 +11,6 @@ layer_height_0 = 0.4 shell_thickness = 1.59 top_bottom_thickness = 1.2 travel_compensate_overlapping_walls_enabled = True -skin_no_small_gaps_heuristic = False top_bottom_pattern = lines infill_sparse_density = 20 infill_overlap = 0.053 diff --git a/resources/profiles/ultimaker2_olsson/0.8_normal.curaprofile b/resources/profiles/ultimaker2_olsson/0.8_normal.curaprofile index bfc3ae8e34..97abce19a3 100644 --- a/resources/profiles/ultimaker2_olsson/0.8_normal.curaprofile +++ b/resources/profiles/ultimaker2_olsson/0.8_normal.curaprofile @@ -11,7 +11,6 @@ layer_height_0 = 0.5 shell_thickness = 2.1 top_bottom_thickness = 1.6 travel_compensate_overlapping_walls_enabled = True -skin_no_small_gaps_heuristic = False top_bottom_pattern = lines infill_sparse_density = 20 infill_overlap = 0.07 From 4bde5c176f7908792ef2a2fe5310c904b7344bba Mon Sep 17 00:00:00 2001 From: Tim Kuipers Date: Wed, 2 Mar 2016 11:10:22 +0100 Subject: [PATCH 2/7] JSON/profiles: fix: made travel_compensate_overlapping_walls_enabled always true (CURA-983) --- resources/machines/fdmprinter.json | 2 +- resources/profiles/ultimaker2+/pla_0.25_normal.curaprofile | 1 - resources/profiles/ultimaker2+/pla_0.4_fast.curaprofile | 1 - resources/profiles/ultimaker2+/pla_0.4_high.curaprofile | 1 - resources/profiles/ultimaker2+/pla_0.4_normal.curaprofile | 1 - resources/profiles/ultimaker2+/pla_0.4_ulti.curaprofile | 1 - resources/profiles/ultimaker2+/pla_0.6_normal.curaprofile | 1 - resources/profiles/ultimaker2+/pla_0.8_normal.curaprofile | 1 - resources/profiles/ultimaker2_olsson/0.25_normal.curaprofile | 1 - resources/profiles/ultimaker2_olsson/0.4_fast.curaprofile | 1 - resources/profiles/ultimaker2_olsson/0.4_high.curaprofile | 1 - resources/profiles/ultimaker2_olsson/0.4_normal.curaprofile | 1 - resources/profiles/ultimaker2_olsson/0.4_ulti.curaprofile | 1 - resources/profiles/ultimaker2_olsson/0.6_normal.curaprofile | 1 - resources/profiles/ultimaker2_olsson/0.8_normal.curaprofile | 1 - 15 files changed, 1 insertion(+), 15 deletions(-) diff --git a/resources/machines/fdmprinter.json b/resources/machines/fdmprinter.json index ca21e83a97..76e8361f8b 100644 --- a/resources/machines/fdmprinter.json +++ b/resources/machines/fdmprinter.json @@ -467,7 +467,7 @@ "label": "Compensate Wall Overlaps", "description": "Compensate the flow for parts of a wall being laid down where there already is a piece of a wall. These overlaps occur in thin pieces in a model. Gcode generation might be slowed down considerably.", "type": "boolean", - "default": false, + "default": true, "visible": false }, "fill_perimeter_gaps": { diff --git a/resources/profiles/ultimaker2+/pla_0.25_normal.curaprofile b/resources/profiles/ultimaker2+/pla_0.25_normal.curaprofile index 31e2b5da88..b52132b5c5 100644 --- a/resources/profiles/ultimaker2+/pla_0.25_normal.curaprofile +++ b/resources/profiles/ultimaker2+/pla_0.25_normal.curaprofile @@ -11,7 +11,6 @@ layer_height = 0.06 layer_height_0 = 0.15 shell_thickness = 0.88 top_bottom_thickness = 0.72 -travel_compensate_overlapping_walls_enabled = True top_bottom_pattern = lines infill_sparse_density = 22 infill_wipe_dist = 0.1 diff --git a/resources/profiles/ultimaker2+/pla_0.4_fast.curaprofile b/resources/profiles/ultimaker2+/pla_0.4_fast.curaprofile index 62abae9dd2..9d947dbb30 100644 --- a/resources/profiles/ultimaker2+/pla_0.4_fast.curaprofile +++ b/resources/profiles/ultimaker2+/pla_0.4_fast.curaprofile @@ -11,7 +11,6 @@ layer_height = 0.15 layer_height_0 = 0.26 shell_thickness = 0.7 top_bottom_thickness = 0.6 -travel_compensate_overlapping_walls_enabled = True top_bottom_pattern = lines infill_sparse_density = 18 infill_wipe_dist = 0.2 diff --git a/resources/profiles/ultimaker2+/pla_0.4_high.curaprofile b/resources/profiles/ultimaker2+/pla_0.4_high.curaprofile index de38624a1e..51a7dc97f8 100644 --- a/resources/profiles/ultimaker2+/pla_0.4_high.curaprofile +++ b/resources/profiles/ultimaker2+/pla_0.4_high.curaprofile @@ -11,7 +11,6 @@ layer_height = 0.06 layer_height_0 = 0.26 shell_thickness = 1.05 top_bottom_thickness = 0.84 -travel_compensate_overlapping_walls_enabled = True top_bottom_pattern = lines infill_sparse_density = 22 infill_wipe_dist = 0.2 diff --git a/resources/profiles/ultimaker2+/pla_0.4_normal.curaprofile b/resources/profiles/ultimaker2+/pla_0.4_normal.curaprofile index 20a4c5e002..6f1116fdee 100644 --- a/resources/profiles/ultimaker2+/pla_0.4_normal.curaprofile +++ b/resources/profiles/ultimaker2+/pla_0.4_normal.curaprofile @@ -11,7 +11,6 @@ layer_height = 0.1 layer_height_0 = 0.26 shell_thickness = 1.05 top_bottom_thickness = 0.8 -travel_compensate_overlapping_walls_enabled = True top_bottom_pattern = lines infill_sparse_density = 20 infill_wipe_dist = 0.2 diff --git a/resources/profiles/ultimaker2+/pla_0.4_ulti.curaprofile b/resources/profiles/ultimaker2+/pla_0.4_ulti.curaprofile index bce7a83a87..e82be902d2 100644 --- a/resources/profiles/ultimaker2+/pla_0.4_ulti.curaprofile +++ b/resources/profiles/ultimaker2+/pla_0.4_ulti.curaprofile @@ -11,7 +11,6 @@ layer_height = 0.04 layer_height_0 = 0.26 shell_thickness = 1.4 top_bottom_thickness = 1.12 -travel_compensate_overlapping_walls_enabled = True top_bottom_pattern = lines infill_sparse_density = 25 infill_wipe_dist = 0.2 diff --git a/resources/profiles/ultimaker2+/pla_0.6_normal.curaprofile b/resources/profiles/ultimaker2+/pla_0.6_normal.curaprofile index f006c958c8..1a2351d38f 100644 --- a/resources/profiles/ultimaker2+/pla_0.6_normal.curaprofile +++ b/resources/profiles/ultimaker2+/pla_0.6_normal.curaprofile @@ -11,7 +11,6 @@ layer_height = 0.15 layer_height_0 = 0.4 shell_thickness = 1.59 top_bottom_thickness = 1.2 -travel_compensate_overlapping_walls_enabled = True top_bottom_pattern = lines infill_sparse_density = 20 infill_wipe_dist = 0.3 diff --git a/resources/profiles/ultimaker2+/pla_0.8_normal.curaprofile b/resources/profiles/ultimaker2+/pla_0.8_normal.curaprofile index 5c63cf0d7f..fe61ced732 100644 --- a/resources/profiles/ultimaker2+/pla_0.8_normal.curaprofile +++ b/resources/profiles/ultimaker2+/pla_0.8_normal.curaprofile @@ -11,7 +11,6 @@ layer_height = 0.2 layer_height_0 = 0.5 shell_thickness = 2.1 top_bottom_thickness = 1.6 -travel_compensate_overlapping_walls_enabled = True top_bottom_pattern = lines infill_sparse_density = 20 infill_wipe_dist = 0.4 diff --git a/resources/profiles/ultimaker2_olsson/0.25_normal.curaprofile b/resources/profiles/ultimaker2_olsson/0.25_normal.curaprofile index 45e4a4a26a..d3f9ddbdf5 100644 --- a/resources/profiles/ultimaker2_olsson/0.25_normal.curaprofile +++ b/resources/profiles/ultimaker2_olsson/0.25_normal.curaprofile @@ -10,7 +10,6 @@ layer_height = 0.06 layer_height_0 = 0.15 shell_thickness = 0.88 top_bottom_thickness = 0.72 -travel_compensate_overlapping_walls_enabled = True top_bottom_pattern = lines infill_sparse_density = 22 infill_overlap = 0.022 diff --git a/resources/profiles/ultimaker2_olsson/0.4_fast.curaprofile b/resources/profiles/ultimaker2_olsson/0.4_fast.curaprofile index 815c6a74e2..b656213b33 100644 --- a/resources/profiles/ultimaker2_olsson/0.4_fast.curaprofile +++ b/resources/profiles/ultimaker2_olsson/0.4_fast.curaprofile @@ -10,7 +10,6 @@ layer_height = 0.15 layer_height_0 = 0.26 shell_thickness = 0.7 top_bottom_thickness = 0.6 -travel_compensate_overlapping_walls_enabled = True top_bottom_pattern = lines infill_sparse_density = 18 infill_overlap = 0.035 diff --git a/resources/profiles/ultimaker2_olsson/0.4_high.curaprofile b/resources/profiles/ultimaker2_olsson/0.4_high.curaprofile index f1b5234698..7a298201d1 100644 --- a/resources/profiles/ultimaker2_olsson/0.4_high.curaprofile +++ b/resources/profiles/ultimaker2_olsson/0.4_high.curaprofile @@ -10,7 +10,6 @@ layer_height = 0.06 layer_height_0 = 0.26 shell_thickness = 1.05 top_bottom_thickness = 0.84 -travel_compensate_overlapping_walls_enabled = True top_bottom_pattern = lines infill_sparse_density = 22 infill_overlap = 0.035 diff --git a/resources/profiles/ultimaker2_olsson/0.4_normal.curaprofile b/resources/profiles/ultimaker2_olsson/0.4_normal.curaprofile index a7f5687ce5..54653ffb78 100644 --- a/resources/profiles/ultimaker2_olsson/0.4_normal.curaprofile +++ b/resources/profiles/ultimaker2_olsson/0.4_normal.curaprofile @@ -10,7 +10,6 @@ layer_height = 0.1 layer_height_0 = 0.26 shell_thickness = 1.05 top_bottom_thickness = 0.8 -travel_compensate_overlapping_walls_enabled = True top_bottom_pattern = lines infill_sparse_density = 20 infill_overlap = 0.035 diff --git a/resources/profiles/ultimaker2_olsson/0.4_ulti.curaprofile b/resources/profiles/ultimaker2_olsson/0.4_ulti.curaprofile index 0d37690391..a64ad72e3a 100644 --- a/resources/profiles/ultimaker2_olsson/0.4_ulti.curaprofile +++ b/resources/profiles/ultimaker2_olsson/0.4_ulti.curaprofile @@ -10,7 +10,6 @@ layer_height = 0.04 layer_height_0 = 0.26 shell_thickness = 1.4 top_bottom_thickness = 1.12 -travel_compensate_overlapping_walls_enabled = True top_bottom_pattern = lines infill_sparse_density = 25 infill_overlap = 0.035 diff --git a/resources/profiles/ultimaker2_olsson/0.6_normal.curaprofile b/resources/profiles/ultimaker2_olsson/0.6_normal.curaprofile index 1ef68752ac..8d237ffce7 100644 --- a/resources/profiles/ultimaker2_olsson/0.6_normal.curaprofile +++ b/resources/profiles/ultimaker2_olsson/0.6_normal.curaprofile @@ -10,7 +10,6 @@ layer_height = 0.15 layer_height_0 = 0.4 shell_thickness = 1.59 top_bottom_thickness = 1.2 -travel_compensate_overlapping_walls_enabled = True top_bottom_pattern = lines infill_sparse_density = 20 infill_overlap = 0.053 diff --git a/resources/profiles/ultimaker2_olsson/0.8_normal.curaprofile b/resources/profiles/ultimaker2_olsson/0.8_normal.curaprofile index 97abce19a3..26f5770df6 100644 --- a/resources/profiles/ultimaker2_olsson/0.8_normal.curaprofile +++ b/resources/profiles/ultimaker2_olsson/0.8_normal.curaprofile @@ -10,7 +10,6 @@ layer_height = 0.2 layer_height_0 = 0.5 shell_thickness = 2.1 top_bottom_thickness = 1.6 -travel_compensate_overlapping_walls_enabled = True top_bottom_pattern = lines infill_sparse_density = 20 infill_overlap = 0.07 From f1999db640b3d06f49e4533038ca7cefe836d7a0 Mon Sep 17 00:00:00 2001 From: Tim Kuipers Date: Wed, 2 Mar 2016 11:13:34 +0100 Subject: [PATCH 3/7] preofiles: fix: removed magic_mesh_surface_mode = False (CURA-983) it is an enum, not a boolean! it is already set to Normal by default --- resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.4_high.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile | 1 - 12 files changed, 12 deletions(-) diff --git a/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile index a18bf4ea34..89fadccdb0 100644 --- a/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile @@ -38,7 +38,6 @@ skirt_minimal_length = 150.0 speed_layer_0 = 20 bottom_thickness = 0.72 layer_height_0 = 0.15 -magic_mesh_surface_mode = False cool_fan_speed_min = 50 top_bottom_thickness = 0.72 skirt_gap = 3.0 diff --git a/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile index 44a9ace179..d65044006e 100644 --- a/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile @@ -38,7 +38,6 @@ speed_wall_x = 40 skirt_minimal_length = 150.0 bottom_thickness = 0.75 layer_height_0 = 0.26 -magic_mesh_surface_mode = False cool_fan_speed_min = 50 top_bottom_thickness = 0.75 skirt_gap = 3.0 diff --git a/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile index 4477592e57..a753e61685 100644 --- a/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile @@ -38,7 +38,6 @@ skirt_minimal_length = 150.0 speed_layer_0 = 20 bottom_thickness = 0.72 layer_height_0 = 0.26 -magic_mesh_surface_mode = False cool_fan_speed_min = 50 top_bottom_thickness = 0.72 skirt_gap = 3.0 diff --git a/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile index 9126e936e1..989cb94d3b 100644 --- a/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile @@ -33,7 +33,6 @@ speed_wall_x = 30 skirt_minimal_length = 150.0 speed_layer_0 = 20 layer_height_0 = 0.26 -magic_mesh_surface_mode = False cool_fan_speed_min = 50 cool_min_layer_time = 3 skirt_gap = 3.0 diff --git a/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile index 3a2fbb815e..7631b7b712 100644 --- a/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile @@ -37,7 +37,6 @@ skirt_minimal_length = 150.0 speed_layer_0 = 20 bottom_thickness = 1.2 layer_height_0 = 0.39 -magic_mesh_surface_mode = False cool_fan_speed_min = 50 top_bottom_thickness = 1.2 skirt_gap = 3.0 diff --git a/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile index 3c6ef7f7e9..8bd4000a32 100644 --- a/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile @@ -37,7 +37,6 @@ skirt_minimal_length = 150.0 speed_layer_0 = 20 bottom_thickness = 1.2 layer_height_0 = 0.5 -magic_mesh_surface_mode = False cool_fan_speed_min = 50 top_bottom_thickness = 1.2 skirt_gap = 3.0 diff --git a/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile index beef7f3490..f2bdec802a 100644 --- a/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile @@ -25,7 +25,6 @@ brim_line_count = 32 cool_lift_head = True retraction_speed = 40.0 cool_fan_speed_max = 100 -magic_mesh_surface_mode = False speed_print = 20 shell_thickness = 0.88 speed_wall_0 = 20 diff --git a/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile index 37885d9235..66df16d1ce 100644 --- a/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile @@ -26,7 +26,6 @@ brim_line_count = 20 cool_lift_head = True retraction_speed = 40.0 cool_fan_speed_max = 100 -magic_mesh_surface_mode = False speed_print = 30 shell_thickness = 0.7 speed_wall_0 = 30 diff --git a/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile index 10e8252915..7913e5af3d 100644 --- a/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile @@ -25,7 +25,6 @@ brim_line_count = 20 cool_lift_head = True retraction_speed = 40.0 cool_fan_speed_max = 100 -magic_mesh_surface_mode = False speed_print = 20 shell_thickness = 1.05 speed_wall_0 = 20 diff --git a/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile index cfd3477f88..71228e6636 100644 --- a/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile @@ -23,7 +23,6 @@ brim_line_count = 20 cool_lift_head = True raft_interface_line_width = 0.4 cool_fan_speed_max = 100 -magic_mesh_surface_mode = False speed_print = 20 shell_thickness = 1.05 speed_wall_0 = 20 diff --git a/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile index b3d19baa9e..496575d327 100644 --- a/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile @@ -24,7 +24,6 @@ brim_line_count = 14 cool_lift_head = True retraction_speed = 40.0 cool_fan_speed_max = 100 -magic_mesh_surface_mode = False speed_print = 20 shell_thickness = 1.59 speed_wall_0 = 20 diff --git a/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile index b0bcdceac2..02062e9731 100644 --- a/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile @@ -24,7 +24,6 @@ brim_line_count = 10 cool_lift_head = True retraction_speed = 40.0 cool_fan_speed_max = 100 -magic_mesh_surface_mode = False speed_print = 20 shell_thickness = 2.1 speed_wall_0 = 20 From fadb282cc69356bde568e56e8185148922050e78 Mon Sep 17 00:00:00 2001 From: Tim Kuipers Date: Wed, 2 Mar 2016 11:26:25 +0100 Subject: [PATCH 4/7] profiles: fix: retraction_combing was All instead of true, but that was already the default (CURA-983) --- resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.4_high.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile | 2 +- resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile | 1 - 12 files changed, 1 insertion(+), 12 deletions(-) diff --git a/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile index 89fadccdb0..7055e1ddf6 100644 --- a/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile @@ -11,7 +11,6 @@ raft_base_line_width = 1.0 raft_margin = 5.0 cool_min_layer_time = 2 support_enable = False -retraction_combing = All cool_min_speed = 25 brim_line_count = 32 top_thickness = 0.72 diff --git a/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile index d65044006e..f2813537c3 100644 --- a/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile @@ -11,7 +11,6 @@ raft_base_line_width = 1.0 raft_margin = 5.0 cool_min_layer_time = 3 support_enable = False -retraction_combing = All speed_travel = 150 cool_min_speed = 20 brim_line_count = 20 diff --git a/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile index a753e61685..e9a438e8f6 100644 --- a/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile @@ -11,7 +11,6 @@ raft_base_line_width = 1.0 raft_margin = 5.0 cool_min_layer_time = 3 support_enable = False -retraction_combing = All cool_min_speed = 20 brim_line_count = 20 top_thickness = 0.72 diff --git a/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile index 989cb94d3b..b900ad9992 100644 --- a/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile @@ -10,7 +10,7 @@ raft_surface_thickness = 0.27 raft_base_line_width = 1.0 raft_margin = 5.0 support_enable = False -retraction_combing = All + cool_min_speed = 20 brim_line_count = 20 material_flow = 100.0 diff --git a/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile index 7631b7b712..199afde3bb 100644 --- a/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile @@ -11,7 +11,6 @@ raft_base_line_width = 1.0 raft_margin = 5.0 cool_min_layer_time = 3 support_enable = False -retraction_combing = All cool_min_speed = 20 brim_line_count = 14 top_thickness = 1.2 diff --git a/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile index 8bd4000a32..d18b6b5a42 100644 --- a/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile @@ -11,7 +11,6 @@ raft_base_line_width = 1.0 raft_margin = 5.0 cool_min_layer_time = 3 support_enable = False -retraction_combing = All cool_min_speed = 15 brim_line_count = 10 top_thickness = 1.2 diff --git a/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile index f2bdec802a..f2cbde90ec 100644 --- a/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile @@ -14,7 +14,6 @@ raft_surface_thickness = 0.27 raft_interface_line_spacing = 3.0 bottom_thickness = 0.72 raft_surface_line_spacing = 3.0 -retraction_combing = All adhesion_type = brim cool_min_layer_time = 2 layer_height = 0.06 diff --git a/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile index 66df16d1ce..752443b6f9 100644 --- a/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile @@ -15,7 +15,6 @@ raft_interface_line_spacing = 3.0 support_enable = False raft_surface_line_width = 0.4 raft_surface_line_spacing = 3.0 -retraction_combing = All adhesion_type = brim cool_min_layer_time = 3 layer_height = 0.15 diff --git a/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile index 7913e5af3d..341a0ea9ab 100644 --- a/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile @@ -14,7 +14,6 @@ raft_surface_thickness = 0.27 raft_interface_line_spacing = 3.0 bottom_thickness = 0.72 raft_surface_line_spacing = 3.0 -retraction_combing = All adhesion_type = brim cool_min_layer_time = 3 layer_height = 0.06 diff --git a/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile index 71228e6636..71a30a68f0 100644 --- a/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile @@ -14,7 +14,6 @@ support_pattern = lines raft_interface_line_spacing = 3.0 raft_surface_line_width = 0.4 cool_fan_speed_min = 50 -retraction_combing = All adhesion_type = brim cool_min_layer_time = 3 infill_before_walls = False diff --git a/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile index 496575d327..11129afb15 100644 --- a/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile @@ -14,7 +14,6 @@ raft_surface_thickness = 0.27 raft_interface_line_spacing = 3.0 bottom_thickness = 1.2 support_pattern = lines -retraction_combing = All adhesion_type = brim cool_min_layer_time = 3 layer_height = 0.15 diff --git a/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile index 02062e9731..7a4cd033ea 100644 --- a/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile @@ -14,7 +14,6 @@ raft_surface_thickness = 0.27 raft_interface_line_spacing = 3.0 bottom_thickness = 1.2 support_pattern = lines -retraction_combing = All adhesion_type = brim cool_min_layer_time = 3 layer_height = 0.2 From 777163cb1a79b0fb9e286995fdc6a6a1e69691a5 Mon Sep 17 00:00:00 2001 From: Tim Kuipers Date: Wed, 2 Mar 2016 12:23:02 +0100 Subject: [PATCH 5/7] profiles: removed zhop=0 cause that was already default (CURA-983) --- resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.4_high.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile | 1 - resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile | 1 - resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile | 1 - 12 files changed, 12 deletions(-) diff --git a/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile index 7055e1ddf6..04142da2e7 100644 --- a/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile @@ -17,7 +17,6 @@ top_thickness = 0.72 material_flow = 100.0 cool_lift_head = True speed_print = 20 -retraction_hop = 0.0 machine_nozzle_size = 0.22 layer_height = 0.06 speed_wall_0 = 20 diff --git a/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile index f2813537c3..b92bb4ee20 100644 --- a/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile @@ -18,7 +18,6 @@ top_thickness = 0.75 material_flow = 100.0 cool_lift_head = True speed_print = 40 -retraction_hop = 0.0 machine_nozzle_size = 0.35 layer_height = 0.15 speed_wall_0 = 30 diff --git a/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile index e9a438e8f6..1b1ae523b1 100644 --- a/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile @@ -17,7 +17,6 @@ top_thickness = 0.72 material_flow = 100.0 cool_lift_head = True speed_print = 30 -retraction_hop = 0.0 machine_nozzle_size = 0.35 layer_height = 0.06 speed_wall_0 = 20 diff --git a/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile index b900ad9992..99f5dc61c3 100644 --- a/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile @@ -16,7 +16,6 @@ brim_line_count = 20 material_flow = 100.0 cool_lift_head = True speed_print = 30 -retraction_hop = 0.0 machine_nozzle_size = 0.35 speed_wall_0 = 20 raft_interface_line_spacing = 3.0 diff --git a/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile index 199afde3bb..d8c4b0fcb2 100644 --- a/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile @@ -17,7 +17,6 @@ top_thickness = 1.2 material_flow = 100.0 cool_lift_head = True speed_print = 25 -retraction_hop = 0.0 machine_nozzle_size = 0.53 layer_height = 0.15 speed_wall_0 = 20 diff --git a/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile index d18b6b5a42..ce235a43c5 100644 --- a/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile @@ -17,7 +17,6 @@ top_thickness = 1.2 material_flow = 100.0 cool_lift_head = True speed_print = 20 -retraction_hop = 0.0 machine_nozzle_size = 0.7 layer_height = 0.2 speed_wall_0 = 20 diff --git a/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile index f2cbde90ec..1031f6ad19 100644 --- a/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile @@ -7,7 +7,6 @@ material = CPE [settings] cool_fan_speed_min = 50 -retraction_hop = 0.0 support_enable = False raft_airgap = 0.0 raft_surface_thickness = 0.27 diff --git a/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile index 752443b6f9..f2cae02169 100644 --- a/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile @@ -7,7 +7,6 @@ material = CPE [settings] cool_fan_speed_min = 50 -retraction_hop = 0.0 raft_airgap = 0.0 speed_travel = 150 raft_surface_thickness = 0.27 diff --git a/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile index 341a0ea9ab..1b1688e089 100644 --- a/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile @@ -7,7 +7,6 @@ material = CPE [settings] cool_fan_speed_min = 50 -retraction_hop = 0.0 support_enable = False raft_airgap = 0.0 raft_surface_thickness = 0.27 diff --git a/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile index 71a30a68f0..be166f6384 100644 --- a/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile @@ -6,7 +6,6 @@ machine_variant = 0.4 mm material = CPE [settings] -retraction_hop = 0.0 support_enable = False raft_airgap = 0.0 raft_surface_thickness = 0.27 diff --git a/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile index 11129afb15..f813d5b784 100644 --- a/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile @@ -7,7 +7,6 @@ material = CPE [settings] cool_fan_speed_min = 50 -retraction_hop = 0.0 support_enable = False raft_airgap = 0.0 raft_surface_thickness = 0.27 diff --git a/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile index 7a4cd033ea..9f0e7dcc0a 100644 --- a/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile @@ -7,7 +7,6 @@ material = CPE [settings] cool_fan_speed_min = 50 -retraction_hop = 0.0 support_enable = False raft_airgap = 0.0 raft_surface_thickness = 0.27 From 4cc3d03bae9e805801b8f885902516e525cd29bd Mon Sep 17 00:00:00 2001 From: Tim Kuipers Date: Wed, 2 Mar 2016 14:10:22 +0100 Subject: [PATCH 6/7] prefoles: fix: platform_adhesion settings were spelled with capitals (CURA-983) --- resources/profiles/materials/abs.cfg | 2 +- resources/profiles/materials/cpe.cfg | 2 +- resources/profiles/materials/pla.cfg | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/resources/profiles/materials/abs.cfg b/resources/profiles/materials/abs.cfg index 2ec46947a0..89095c0024 100644 --- a/resources/profiles/materials/abs.cfg +++ b/resources/profiles/materials/abs.cfg @@ -5,7 +5,7 @@ name = ABS [settings] material_bed_temperature = 100 -platform_adhesion = Brim +platform_adhesion = brim material_flow = 107 material_print_temperature = 250 cool_fan_speed = 50 diff --git a/resources/profiles/materials/cpe.cfg b/resources/profiles/materials/cpe.cfg index 508bd39fcf..431a6d38d7 100644 --- a/resources/profiles/materials/cpe.cfg +++ b/resources/profiles/materials/cpe.cfg @@ -5,7 +5,7 @@ name = CPE [settings] material_bed_temperature = 60 -platform_adhesion = Brim +platform_adhesion = brim material_flow = 100 material_print_temperature = 250 cool_fan_speed = 50 diff --git a/resources/profiles/materials/pla.cfg b/resources/profiles/materials/pla.cfg index a8d8c6a400..99a06e5e1b 100644 --- a/resources/profiles/materials/pla.cfg +++ b/resources/profiles/materials/pla.cfg @@ -5,7 +5,7 @@ name = PLA [settings] material_bed_temperature = 60 -platform_adhesion = Skirt +platform_adhesion = skirt material_flow = 100 material_print_temperature = 210 cool_fan_speed = 100 From 6411168fc97c9f5337dad6f26d51ca276426eb82 Mon Sep 17 00:00:00 2001 From: Tim Kuipers Date: Wed, 2 Mar 2016 15:14:23 +0100 Subject: [PATCH 7/7] profiles: regenerated abs and pce profiles for UM2+ (CURA-987) --- .../ultimaker2+/abs_0.25_normal.curaprofile | 52 ++++++------------- .../ultimaker2+/abs_0.4_fast.curaprofile | 52 ++++++------------- .../ultimaker2+/abs_0.4_high.curaprofile | 51 ++++++------------ .../ultimaker2+/abs_0.4_normal.curaprofile | 40 ++++---------- .../ultimaker2+/abs_0.6_normal.curaprofile | 50 ++++++------------ .../ultimaker2+/abs_0.8_normal.curaprofile | 50 ++++++------------ .../ultimaker2+/cpe_0.25_normal.curaprofile | 51 ++++++------------ .../ultimaker2+/cpe_0.4_fast.curaprofile | 45 +++++----------- .../ultimaker2+/cpe_0.4_high.curaprofile | 45 +++++----------- .../ultimaker2+/cpe_0.4_normal.curaprofile | 35 +++---------- .../ultimaker2+/cpe_0.6_normal.curaprofile | 49 ++++++----------- .../ultimaker2+/cpe_0.8_normal.curaprofile | 49 ++++++----------- 12 files changed, 176 insertions(+), 393 deletions(-) diff --git a/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile index 04142da2e7..263e730a97 100644 --- a/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile @@ -6,42 +6,24 @@ machine_variant = 0.25 mm material = ABS [settings] -raft_surface_thickness = 0.27 -raft_base_line_width = 1.0 -raft_margin = 5.0 -cool_min_layer_time = 2 -support_enable = False -cool_min_speed = 25 -brim_line_count = 32 -top_thickness = 0.72 -material_flow = 100.0 -cool_lift_head = True -speed_print = 20 -machine_nozzle_size = 0.22 layer_height = 0.06 -speed_wall_0 = 20 -raft_interface_line_spacing = 3.0 -speed_topbottom = 20 -speed_infill = 30 -infill_before_walls = False -retraction_speed = 40.0 -infill_sparse_density = 22 -shell_thickness = 0.88 -cool_fan_speed_max = 100 -raft_airgap = 0.0 -material_bed_temperature = 70 -infill_overlap = 15 -speed_wall_x = 25 -skirt_minimal_length = 150.0 -speed_layer_0 = 20 -bottom_thickness = 0.72 -layer_height_0 = 0.15 -cool_fan_speed_min = 50 top_bottom_thickness = 0.72 -skirt_gap = 3.0 -raft_interface_line_width = 0.4 +layer_height_0 = 0.15 +brim_line_count = 32 +speed_wall_x = 25 +wall_thickness = 0.88 +speed_infill = 30 +speed_topbottom = 20 adhesion_type = brim -support_pattern = lines -raft_surface_line_width = 0.4 -raft_surface_line_spacing = 3.0 +speed_print = 20 +cool_min_speed = 25 +line_width = 0.22 +infill_sparse_density = 22 +bottom_thickness = 0.72 +machine_nozzle_size = 0.22 +top_thickness = 0.72 +speed_wall_0 = 20 +cool_min_layer_time = 2 +cool_lift_head = True +cool_fan_speed_min = 50 diff --git a/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile index b92bb4ee20..3361af5fdd 100644 --- a/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile @@ -6,42 +6,24 @@ machine_variant = 0.4 mm material = ABS [settings] -raft_surface_thickness = 0.27 -raft_base_line_width = 1.0 -raft_margin = 5.0 -cool_min_layer_time = 3 -support_enable = False -speed_travel = 150 -cool_min_speed = 20 -brim_line_count = 20 -top_thickness = 0.75 -material_flow = 100.0 -cool_lift_head = True -speed_print = 40 -machine_nozzle_size = 0.35 layer_height = 0.15 -speed_wall_0 = 30 -raft_interface_line_spacing = 3.0 -speed_topbottom = 30 -speed_infill = 55 -infill_before_walls = False -retraction_speed = 40.0 -infill_sparse_density = 18 -shell_thickness = 0.7 -cool_fan_speed_max = 100 -raft_airgap = 0.0 -material_bed_temperature = 70 -infill_overlap = 15 -speed_wall_x = 40 -skirt_minimal_length = 150.0 -bottom_thickness = 0.75 -layer_height_0 = 0.26 -cool_fan_speed_min = 50 top_bottom_thickness = 0.75 -skirt_gap = 3.0 -raft_interface_line_width = 0.4 +layer_height_0 = 0.26 +speed_print = 40 +speed_wall_x = 40 +wall_thickness = 0.7 +speed_infill = 55 +speed_topbottom = 30 +cool_min_layer_time = 3 +bottom_thickness = 0.75 +cool_min_speed = 20 +line_width = 0.35 +infill_sparse_density = 18 +top_thickness = 0.75 +machine_nozzle_size = 0.35 +speed_travel = 150 +speed_wall_0 = 30 adhesion_type = brim -support_pattern = lines -raft_surface_line_width = 0.4 -raft_surface_line_spacing = 3.0 +cool_lift_head = True +cool_fan_speed_min = 50 diff --git a/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile index 1b1ae523b1..edc46ab0fa 100644 --- a/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile @@ -6,42 +6,23 @@ machine_variant = 0.4 mm material = ABS [settings] -raft_surface_thickness = 0.27 -raft_base_line_width = 1.0 -raft_margin = 5.0 -cool_min_layer_time = 3 -support_enable = False -cool_min_speed = 20 -brim_line_count = 20 -top_thickness = 0.72 -material_flow = 100.0 -cool_lift_head = True -speed_print = 30 -machine_nozzle_size = 0.35 layer_height = 0.06 -speed_wall_0 = 20 -raft_interface_line_spacing = 3.0 -speed_topbottom = 20 -speed_infill = 45 -infill_before_walls = False -retraction_speed = 40.0 -infill_sparse_density = 22 -shell_thickness = 1.05 -cool_fan_speed_max = 100 -raft_airgap = 0.0 -material_bed_temperature = 70 -infill_overlap = 15 -speed_wall_x = 30 -skirt_minimal_length = 150.0 -speed_layer_0 = 20 -bottom_thickness = 0.72 -layer_height_0 = 0.26 -cool_fan_speed_min = 50 top_bottom_thickness = 0.72 -skirt_gap = 3.0 -raft_interface_line_width = 0.4 +layer_height_0 = 0.26 +speed_print = 30 +speed_wall_x = 30 +wall_thickness = 1.05 +speed_infill = 45 +speed_topbottom = 20 adhesion_type = brim -support_pattern = lines -raft_surface_line_width = 0.4 -raft_surface_line_spacing = 3.0 +cool_min_speed = 20 +line_width = 0.35 +infill_sparse_density = 22 +bottom_thickness = 0.72 +machine_nozzle_size = 0.35 +top_thickness = 0.72 +speed_wall_0 = 20 +cool_min_layer_time = 3 +cool_lift_head = True +cool_fan_speed_min = 50 diff --git a/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile index 99f5dc61c3..a8d63d07db 100644 --- a/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile @@ -6,38 +6,18 @@ machine_variant = 0.4 mm material = ABS [settings] -raft_surface_thickness = 0.27 -raft_base_line_width = 1.0 -raft_margin = 5.0 -support_enable = False - -cool_min_speed = 20 -brim_line_count = 20 -material_flow = 100.0 -cool_lift_head = True +layer_height_0 = 0.26 speed_print = 30 +speed_wall_x = 30 +wall_thickness = 1.05 +speed_infill = 45 +speed_topbottom = 20 +cool_min_layer_time = 3 +cool_min_speed = 20 +line_width = 0.35 machine_nozzle_size = 0.35 speed_wall_0 = 20 -raft_interface_line_spacing = 3.0 -speed_topbottom = 20 -speed_infill = 45 -infill_before_walls = False -retraction_speed = 40.0 -shell_thickness = 1.05 -cool_fan_speed_max = 100 -raft_airgap = 0.0 -material_bed_temperature = 70 -infill_overlap = 15 -speed_wall_x = 30 -skirt_minimal_length = 150.0 -speed_layer_0 = 20 -layer_height_0 = 0.26 -cool_fan_speed_min = 50 -cool_min_layer_time = 3 -skirt_gap = 3.0 -raft_interface_line_width = 0.4 adhesion_type = brim -support_pattern = lines -raft_surface_line_width = 0.4 -raft_surface_line_spacing = 3.0 +cool_lift_head = True +cool_fan_speed_min = 50 diff --git a/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile index d8c4b0fcb2..8b905b14e6 100644 --- a/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile @@ -6,41 +6,23 @@ machine_variant = 0.6 mm material = ABS [settings] -raft_surface_thickness = 0.27 -raft_base_line_width = 1.0 -raft_margin = 5.0 -cool_min_layer_time = 3 -support_enable = False -cool_min_speed = 20 -brim_line_count = 14 -top_thickness = 1.2 -material_flow = 100.0 -cool_lift_head = True -speed_print = 25 -machine_nozzle_size = 0.53 layer_height = 0.15 -speed_wall_0 = 20 -raft_interface_line_spacing = 3.0 -speed_topbottom = 20 -speed_infill = 55 -infill_before_walls = False -retraction_speed = 40.0 -shell_thickness = 1.59 -cool_fan_speed_max = 100 -raft_airgap = 0.0 -material_bed_temperature = 70 -infill_overlap = 15 -speed_wall_x = 30 -skirt_minimal_length = 150.0 -speed_layer_0 = 20 -bottom_thickness = 1.2 -layer_height_0 = 0.39 -cool_fan_speed_min = 50 top_bottom_thickness = 1.2 -skirt_gap = 3.0 -raft_interface_line_width = 0.4 +layer_height_0 = 0.39 +speed_print = 25 +speed_wall_x = 30 +wall_thickness = 1.59 +speed_infill = 55 +speed_topbottom = 20 adhesion_type = brim -support_pattern = lines -raft_surface_line_width = 0.4 -raft_surface_line_spacing = 3.0 +brim_line_count = 14 +cool_min_speed = 20 +line_width = 0.53 +bottom_thickness = 1.2 +machine_nozzle_size = 0.53 +top_thickness = 1.2 +speed_wall_0 = 20 +cool_min_layer_time = 3 +cool_lift_head = True +cool_fan_speed_min = 50 diff --git a/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile index ce235a43c5..25a6ccdc6e 100644 --- a/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile +++ b/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile @@ -6,41 +6,23 @@ machine_variant = 0.8 mm material = ABS [settings] -raft_surface_thickness = 0.27 -raft_base_line_width = 1.0 -raft_margin = 5.0 -cool_min_layer_time = 3 -support_enable = False -cool_min_speed = 15 -brim_line_count = 10 -top_thickness = 1.2 -material_flow = 100.0 -cool_lift_head = True -speed_print = 20 -machine_nozzle_size = 0.7 layer_height = 0.2 -speed_wall_0 = 20 -raft_interface_line_spacing = 3.0 -speed_topbottom = 20 -speed_infill = 40 -infill_before_walls = False -retraction_speed = 40.0 -shell_thickness = 2.1 -cool_fan_speed_max = 100 -raft_airgap = 0.0 -material_bed_temperature = 70 -infill_overlap = 15 -speed_wall_x = 30 -skirt_minimal_length = 150.0 -speed_layer_0 = 20 -bottom_thickness = 1.2 -layer_height_0 = 0.5 -cool_fan_speed_min = 50 top_bottom_thickness = 1.2 -skirt_gap = 3.0 -raft_interface_line_width = 0.4 +layer_height_0 = 0.5 +speed_print = 20 +speed_wall_x = 30 +wall_thickness = 2.1 +speed_infill = 40 +speed_topbottom = 20 adhesion_type = brim -support_pattern = lines -raft_surface_line_width = 0.4 -raft_surface_line_spacing = 3.0 +brim_line_count = 10 +cool_min_speed = 15 +line_width = 0.7 +bottom_thickness = 1.2 +machine_nozzle_size = 0.7 +top_thickness = 1.2 +speed_wall_0 = 20 +cool_min_layer_time = 3 +cool_lift_head = True +cool_fan_speed_min = 50 diff --git a/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile index 1031f6ad19..6664aa4436 100644 --- a/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile @@ -6,41 +6,24 @@ machine_variant = 0.25 mm material = CPE [settings] -cool_fan_speed_min = 50 -support_enable = False -raft_airgap = 0.0 -raft_surface_thickness = 0.27 -raft_interface_line_spacing = 3.0 -bottom_thickness = 0.72 -raft_surface_line_spacing = 3.0 -adhesion_type = brim -cool_min_layer_time = 2 -layer_height = 0.06 -raft_margin = 5.0 -speed_infill = 30 -speed_layer_0 = 20 -brim_line_count = 32 -cool_lift_head = True -retraction_speed = 40.0 -cool_fan_speed_max = 100 -speed_print = 20 -shell_thickness = 0.88 -speed_wall_0 = 20 -material_flow = 100.0 -support_pattern = lines -infill_sparse_density = 22 -raft_interface_line_width = 0.4 -layer_height_0 = 0.15 -material_bed_temperature = 70 -top_thickness = 0.72 -top_bottom_thickness = 0.72 -speed_wall_x = 25 infill_overlap = 17 -infill_before_walls = False -raft_surface_line_width = 0.4 -skirt_minimal_length = 150.0 +layer_height = 0.06 +wall_thickness = 0.88 +layer_height_0 = 0.15 +brim_line_count = 32 +speed_wall_x = 25 +top_bottom_thickness = 0.72 +speed_infill = 30 speed_topbottom = 20 -skirt_gap = 3.0 -raft_base_line_width = 1.0 +cool_min_layer_time = 2 +speed_print = 20 +line_width = 0.22 +infill_sparse_density = 22 +bottom_thickness = 0.72 machine_nozzle_size = 0.22 +top_thickness = 0.72 +speed_wall_0 = 20 +adhesion_type = brim +cool_lift_head = True +cool_fan_speed_min = 50 diff --git a/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile index f2cae02169..41efd0a42b 100644 --- a/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile @@ -6,41 +6,24 @@ machine_variant = 0.4 mm material = CPE [settings] -cool_fan_speed_min = 50 -raft_airgap = 0.0 -speed_travel = 150 -raft_surface_thickness = 0.27 -raft_interface_line_spacing = 3.0 -support_enable = False -raft_surface_line_width = 0.4 -raft_surface_line_spacing = 3.0 -adhesion_type = brim +infill_overlap = 17 cool_min_layer_time = 3 layer_height = 0.15 -raft_margin = 5.0 -speed_infill = 45 -bottom_thickness = 0.75 -brim_line_count = 20 -cool_lift_head = True -retraction_speed = 40.0 -cool_fan_speed_max = 100 -speed_print = 30 -shell_thickness = 0.7 -speed_wall_0 = 30 -material_flow = 100.0 -support_pattern = lines -infill_sparse_density = 18 -raft_interface_line_width = 0.4 +wall_thickness = 0.7 layer_height_0 = 0.26 -material_bed_temperature = 70 -top_thickness = 0.75 -top_bottom_thickness = 0.75 +speed_print = 30 speed_wall_x = 40 -infill_overlap = 17 -infill_before_walls = False -skirt_minimal_length = 150.0 +top_bottom_thickness = 0.75 +speed_infill = 45 speed_topbottom = 20 -skirt_gap = 3.0 -raft_base_line_width = 1.0 +speed_travel = 150 +line_width = 0.35 +infill_sparse_density = 18 +bottom_thickness = 0.75 machine_nozzle_size = 0.35 +top_thickness = 0.75 +speed_wall_0 = 30 +adhesion_type = brim +cool_lift_head = True +cool_fan_speed_min = 50 diff --git a/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile index 1b1688e089..8b8684522b 100644 --- a/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile @@ -6,41 +6,22 @@ machine_variant = 0.4 mm material = CPE [settings] -cool_fan_speed_min = 50 -support_enable = False -raft_airgap = 0.0 -raft_surface_thickness = 0.27 -raft_interface_line_spacing = 3.0 -bottom_thickness = 0.72 -raft_surface_line_spacing = 3.0 -adhesion_type = brim -cool_min_layer_time = 3 layer_height = 0.06 -raft_margin = 5.0 -speed_infill = 45 -speed_layer_0 = 20 -brim_line_count = 20 -cool_lift_head = True -retraction_speed = 40.0 -cool_fan_speed_max = 100 -speed_print = 20 -shell_thickness = 1.05 -speed_wall_0 = 20 -material_flow = 100.0 -support_pattern = lines -infill_sparse_density = 22 -raft_interface_line_width = 0.4 -layer_height_0 = 0.26 -material_bed_temperature = 70 -top_thickness = 0.72 top_bottom_thickness = 0.72 +layer_height_0 = 0.26 +speed_print = 20 speed_wall_x = 30 -infill_overlap = 15 -infill_before_walls = False -raft_surface_line_width = 0.4 -skirt_minimal_length = 150.0 +wall_thickness = 1.05 +speed_infill = 45 speed_topbottom = 20 -skirt_gap = 3.0 -raft_base_line_width = 1.0 +adhesion_type = brim +line_width = 0.35 +infill_sparse_density = 22 +bottom_thickness = 0.72 machine_nozzle_size = 0.35 +top_thickness = 0.72 +speed_wall_0 = 20 +cool_min_layer_time = 3 +cool_lift_head = True +cool_fan_speed_min = 50 diff --git a/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile index be166f6384..ae721733e5 100644 --- a/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile @@ -6,36 +6,17 @@ machine_variant = 0.4 mm material = CPE [settings] -support_enable = False -raft_airgap = 0.0 -raft_surface_thickness = 0.27 -support_pattern = lines -raft_interface_line_spacing = 3.0 -raft_surface_line_width = 0.4 -cool_fan_speed_min = 50 -adhesion_type = brim -cool_min_layer_time = 3 -infill_before_walls = False -speed_layer_0 = 20 -brim_line_count = 20 -cool_lift_head = True -raft_interface_line_width = 0.4 -cool_fan_speed_max = 100 -speed_print = 20 -shell_thickness = 1.05 -speed_wall_0 = 20 -material_flow = 100.0 -raft_surface_line_spacing = 3.0 -raft_margin = 5.0 -retraction_speed = 40.0 layer_height_0 = 0.26 -material_bed_temperature = 70 +speed_print = 20 speed_wall_x = 30 -infill_overlap = 15 +wall_thickness = 1.05 speed_infill = 45 -skirt_minimal_length = 150.0 speed_topbottom = 20 -skirt_gap = 3.0 -raft_base_line_width = 1.0 +cool_min_layer_time = 3 +line_width = 0.35 machine_nozzle_size = 0.35 +speed_wall_0 = 20 +adhesion_type = brim +cool_lift_head = True +cool_fan_speed_min = 50 diff --git a/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile index f813d5b784..6fb87172b5 100644 --- a/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile @@ -6,40 +6,23 @@ machine_variant = 0.6 mm material = CPE [settings] -cool_fan_speed_min = 50 -support_enable = False -raft_airgap = 0.0 -raft_surface_thickness = 0.27 -raft_interface_line_spacing = 3.0 -bottom_thickness = 1.2 -support_pattern = lines -adhesion_type = brim -cool_min_layer_time = 3 -layer_height = 0.15 -speed_infill = 40 -speed_layer_0 = 20 -brim_line_count = 14 -cool_lift_head = True -retraction_speed = 40.0 -cool_fan_speed_max = 100 -speed_print = 20 -shell_thickness = 1.59 -speed_wall_0 = 20 -material_flow = 100.0 -raft_surface_line_spacing = 3.0 -raft_margin = 5.0 -raft_interface_line_width = 0.4 -layer_height_0 = 0.39 -material_bed_temperature = 70 -top_thickness = 1.2 -top_bottom_thickness = 1.2 -speed_wall_x = 30 infill_overlap = 17 -infill_before_walls = False -raft_surface_line_width = 0.4 -skirt_minimal_length = 150.0 +layer_height = 0.15 +top_bottom_thickness = 1.2 +layer_height_0 = 0.39 +brim_line_count = 14 +speed_wall_x = 30 +wall_thickness = 1.59 +speed_infill = 40 speed_topbottom = 20 -skirt_gap = 3.0 -raft_base_line_width = 1.0 +cool_min_layer_time = 3 +speed_print = 20 +line_width = 0.53 +bottom_thickness = 1.2 machine_nozzle_size = 0.53 +top_thickness = 1.2 +speed_wall_0 = 20 +adhesion_type = brim +cool_lift_head = True +cool_fan_speed_min = 50 diff --git a/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile index 9f0e7dcc0a..594083d5f6 100644 --- a/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile +++ b/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile @@ -6,40 +6,23 @@ machine_variant = 0.8 mm material = CPE [settings] -cool_fan_speed_min = 50 -support_enable = False -raft_airgap = 0.0 -raft_surface_thickness = 0.27 -raft_interface_line_spacing = 3.0 -bottom_thickness = 1.2 -support_pattern = lines -adhesion_type = brim -cool_min_layer_time = 3 -layer_height = 0.2 -speed_infill = 40 -speed_layer_0 = 20 -brim_line_count = 10 -cool_lift_head = True -retraction_speed = 40.0 -cool_fan_speed_max = 100 -speed_print = 20 -shell_thickness = 2.1 -speed_wall_0 = 20 -material_flow = 100.0 -raft_surface_line_spacing = 3.0 -raft_margin = 5.0 -raft_interface_line_width = 0.4 -layer_height_0 = 0.5 -material_bed_temperature = 70 -top_thickness = 1.2 -top_bottom_thickness = 1.2 -speed_wall_x = 30 infill_overlap = 17 -infill_before_walls = False -raft_surface_line_width = 0.4 -skirt_minimal_length = 150.0 +layer_height = 0.2 +top_bottom_thickness = 1.2 +layer_height_0 = 0.5 +brim_line_count = 10 +speed_wall_x = 30 +wall_thickness = 2.1 +speed_infill = 40 speed_topbottom = 20 -skirt_gap = 3.0 -raft_base_line_width = 1.0 +cool_min_layer_time = 3 +speed_print = 20 +line_width = 0.7 +bottom_thickness = 1.2 machine_nozzle_size = 0.7 +top_thickness = 1.2 +speed_wall_0 = 20 +adhesion_type = brim +cool_lift_head = True +cool_fan_speed_min = 50