diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-pc-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-pc-abs-175_0.2mm.inst.cfg
index bc2275eea0..5c58684f3d 100644
--- a/resources/quality/ultimaker_methodx/um_methodx_1c_um-pc-abs-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-pc-abs-175_0.2mm.inst.cfg
@@ -13,9 +13,8 @@ weight = -2
 
 [values]
 cool_fan_enabled = =extruder_nr == support_extruder_nr
-cool_fan_speed = 75
 cool_fan_speed_0 = 0
-cool_fan_speed_max = 100
+cool_fan_speed_max = 80
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 8
 cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5)
@@ -24,6 +23,7 @@ infill_sparse_density = 15
 material_final_print_temperature = =material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = =0.1 if extruder_nr == support_extruder_nr else 0
+raft_base_infill_overlap = 20
 raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.8
 raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50
 skin_overlap = 10
@@ -50,7 +50,7 @@ support_interface_density = 85
 support_interface_enable = True
 support_interface_pattern = zigzag
 support_line_width = 0.3
-support_material_flow = 95
+support_material_flow = 100
 support_pattern = zigzag
 support_roof_density = 85
 support_roof_wall_count = 1
diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-pc-abs-fr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-pc-abs-fr-175_0.2mm.inst.cfg
index 72b4750e55..72864b1f7e 100644
--- a/resources/quality/ultimaker_methodx/um_methodx_1c_um-pc-abs-fr-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-pc-abs-fr-175_0.2mm.inst.cfg
@@ -13,9 +13,8 @@ weight = -2
 
 [values]
 cool_fan_enabled = =extruder_nr == support_extruder_nr
-cool_fan_speed = 75
 cool_fan_speed_0 = 0
-cool_fan_speed_max = 100
+cool_fan_speed_max = 80
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 8
 cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5)
@@ -24,6 +23,7 @@ infill_sparse_density = 15
 material_final_print_temperature = =material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = =0.1 if extruder_nr == support_extruder_nr else 0
+raft_base_infill_overlap = 20
 raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.8
 raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50
 skin_overlap = 10
@@ -32,7 +32,7 @@ speed_prime_tower = =speed_print * 1/4
 speed_print = 120.0
 speed_roofing = =speed_print * 13/24
 speed_support = =speed_print * 1/2
-speed_support_bottom = 25
+speed_support_bottom = =speed_support * 1/4
 speed_support_interface = =speed_print * 15/24
 speed_topbottom = =speed_print * 11/24
 speed_wall = =speed_print * 5/24
@@ -42,7 +42,8 @@ support_bottom_angles = [135]
 support_bottom_density = 15
 support_bottom_distance = 0.1
 support_bottom_enable = True
-support_bottom_line_width = 0.6
+support_bottom_line_distance = =support_line_distance
+support_bottom_line_width = 0.8
 support_bottom_stair_step_height = 0
 support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135]
 support_infill_rate = 15.0
diff --git a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-pc-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-pc-abs-175_0.2mm.inst.cfg
index 4ceab63942..7e624a2771 100644
--- a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-pc-abs-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-pc-abs-175_0.2mm.inst.cfg
@@ -13,9 +13,8 @@ weight = -2
 
 [values]
 cool_fan_enabled = =extruder_nr == support_extruder_nr
-cool_fan_speed = 75
 cool_fan_speed_0 = 0
-cool_fan_speed_max = 100
+cool_fan_speed_max = 80
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 8
 cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5)
@@ -24,6 +23,7 @@ infill_sparse_density = 15
 material_final_print_temperature = =material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = =0.1 if extruder_nr == support_extruder_nr else 0
+raft_base_infill_overlap = 20
 raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.8
 raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50
 skin_overlap = 10
@@ -50,7 +50,7 @@ support_interface_density = 85
 support_interface_enable = True
 support_interface_pattern = zigzag
 support_line_width = 0.3
-support_material_flow = 95
+support_material_flow = 100
 support_pattern = zigzag
 support_roof_density = 85
 support_roof_wall_count = 1
diff --git a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-pc-abs-fr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-pc-abs-fr-175_0.2mm.inst.cfg
index 17062adace..13e42a1006 100644
--- a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-pc-abs-fr-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-pc-abs-fr-175_0.2mm.inst.cfg
@@ -13,9 +13,8 @@ weight = -2
 
 [values]
 cool_fan_enabled = =extruder_nr == support_extruder_nr
-cool_fan_speed = 75
 cool_fan_speed_0 = 0
-cool_fan_speed_max = 100
+cool_fan_speed_max = 80
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 8
 cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5)
@@ -24,6 +23,7 @@ infill_sparse_density = 15
 material_final_print_temperature = =material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = =0.1 if extruder_nr == support_extruder_nr else 0
+raft_base_infill_overlap = 20
 raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.8
 raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50
 skin_overlap = 10
@@ -32,7 +32,7 @@ speed_prime_tower = =speed_print * 1/4
 speed_print = 120.0
 speed_roofing = =speed_print * 13/24
 speed_support = =speed_print * 1/2
-speed_support_bottom = 25
+speed_support_bottom = =speed_support * 1/4
 speed_support_interface = =speed_print * 15/24
 speed_topbottom = =speed_print * 11/24
 speed_wall = =speed_print * 5/24
@@ -42,7 +42,8 @@ support_bottom_angles = [135]
 support_bottom_density = 15
 support_bottom_distance = 0.1
 support_bottom_enable = True
-support_bottom_line_width = 0.6
+support_bottom_line_distance = =support_line_distance
+support_bottom_line_width = 0.8
 support_bottom_stair_step_height = 0
 support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135]
 support_infill_rate = 15.0
diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-pc-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-pc-abs-175_0.2mm.inst.cfg
index 52de6aa0a6..47db7bee53 100644
--- a/resources/quality/ultimaker_methodx/um_methodx_labs_um-pc-abs-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-pc-abs-175_0.2mm.inst.cfg
@@ -13,9 +13,8 @@ weight = -2
 
 [values]
 cool_fan_enabled = =extruder_nr == support_extruder_nr
-cool_fan_speed = 75
 cool_fan_speed_0 = 0
-cool_fan_speed_max = 100
+cool_fan_speed_max = 80
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 8
 cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5)
@@ -24,6 +23,7 @@ infill_sparse_density = 15
 material_final_print_temperature = =material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = =0.1 if extruder_nr == support_extruder_nr else 0
+raft_base_infill_overlap = 20
 raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.8
 raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50
 skin_overlap = 10
@@ -50,7 +50,7 @@ support_interface_density = 85
 support_interface_enable = True
 support_interface_pattern = zigzag
 support_line_width = 0.3
-support_material_flow = 95
+support_material_flow = 100
 support_pattern = zigzag
 support_roof_density = 85
 support_roof_wall_count = 1
diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-pc-abs-fr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-pc-abs-fr-175_0.2mm.inst.cfg
index 976506fc59..6bba6de819 100644
--- a/resources/quality/ultimaker_methodx/um_methodx_labs_um-pc-abs-fr-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-pc-abs-fr-175_0.2mm.inst.cfg
@@ -13,9 +13,8 @@ weight = -2
 
 [values]
 cool_fan_enabled = =extruder_nr == support_extruder_nr
-cool_fan_speed = 75
 cool_fan_speed_0 = 0
-cool_fan_speed_max = 100
+cool_fan_speed_max = 80
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 8
 cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5)
@@ -24,6 +23,7 @@ infill_sparse_density = 15
 material_final_print_temperature = =material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = =0.1 if extruder_nr == support_extruder_nr else 0
+raft_base_infill_overlap = 20
 raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.8
 raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50
 skin_overlap = 10
@@ -32,7 +32,7 @@ speed_prime_tower = =speed_print * 1/4
 speed_print = 120.0
 speed_roofing = =speed_print * 13/24
 speed_support = =speed_print * 1/2
-speed_support_bottom = 25
+speed_support_bottom = =speed_support * 1/4
 speed_support_interface = =speed_print * 15/24
 speed_topbottom = =speed_print * 11/24
 speed_wall = =speed_print * 5/24
@@ -42,7 +42,8 @@ support_bottom_angles = [135]
 support_bottom_density = 15
 support_bottom_distance = 0.1
 support_bottom_enable = True
-support_bottom_line_width = 0.6
+support_bottom_line_distance = =support_line_distance
+support_bottom_line_width = 0.8
 support_bottom_stair_step_height = 0
 support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135]
 support_infill_rate = 15.0
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pc-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pc-abs-175_0.2mm.inst.cfg
index ca9c1719bc..a072415f8f 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pc-abs-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pc-abs-175_0.2mm.inst.cfg
@@ -13,9 +13,8 @@ weight = -2
 
 [values]
 cool_fan_enabled = =extruder_nr == support_extruder_nr
-cool_fan_speed = 75
 cool_fan_speed_0 = 0
-cool_fan_speed_max = 100
+cool_fan_speed_max = 80
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 8
 cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5)
@@ -23,7 +22,8 @@ cool_min_temperature = 250
 infill_sparse_density = 15
 material_final_print_temperature = =material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
-raft_airgap = =0.12 if extruder_nr == support_extruder_nr else 0
+raft_airgap = =0.1 if extruder_nr == support_extruder_nr else 0
+raft_base_infill_overlap = 20
 raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50
 skin_overlap = 10
 speed_layer_0 = =speed_print * 7/24
@@ -49,7 +49,7 @@ support_interface_density = 85
 support_interface_enable = True
 support_interface_pattern = zigzag
 support_line_width = 0.3
-support_material_flow = 95
+support_material_flow = 100
 support_pattern = zigzag
 support_roof_density = 85
 support_roof_wall_count = 1
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pc-abs-fr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pc-abs-fr-175_0.2mm.inst.cfg
index 7c67d5afc3..272c94e581 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pc-abs-fr-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pc-abs-fr-175_0.2mm.inst.cfg
@@ -13,9 +13,8 @@ weight = -2
 
 [values]
 cool_fan_enabled = =extruder_nr == support_extruder_nr
-cool_fan_speed = 75
 cool_fan_speed_0 = 0
-cool_fan_speed_max = 100
+cool_fan_speed_max = 80
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 8
 cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5)
@@ -23,7 +22,8 @@ cool_min_temperature = 250
 infill_sparse_density = 15
 material_final_print_temperature = =material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
-raft_airgap = =0.12 if extruder_nr == support_extruder_nr else 0
+raft_airgap = =0.1 if extruder_nr == support_extruder_nr else 0
+raft_base_infill_overlap = 20
 raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50
 skin_overlap = 10
 speed_layer_0 = =speed_print * 7/24
@@ -31,7 +31,7 @@ speed_prime_tower = =speed_print * 1/4
 speed_print = 120.0
 speed_roofing = =speed_print * 13/24
 speed_support = =speed_print * 1/2
-speed_support_bottom = 25
+speed_support_bottom = =speed_support * 1/4
 speed_support_interface = =speed_print * 15/24
 speed_topbottom = =speed_print * 11/24
 speed_wall = =speed_print * 5/24
@@ -41,7 +41,8 @@ support_bottom_angles = [135]
 support_bottom_density = 15
 support_bottom_distance = 0.1
 support_bottom_enable = True
-support_bottom_line_width = 0.6
+support_bottom_line_distance = =support_line_distance
+support_bottom_line_width = 0.8
 support_bottom_stair_step_height = 0
 support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135]
 support_infill_rate = 15.0
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-pc-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-pc-abs-175_0.2mm.inst.cfg
index 20fbd4217e..2bb4fae463 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-pc-abs-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-pc-abs-175_0.2mm.inst.cfg
@@ -13,9 +13,8 @@ weight = -2
 
 [values]
 cool_fan_enabled = =extruder_nr == support_extruder_nr
-cool_fan_speed = 75
 cool_fan_speed_0 = 0
-cool_fan_speed_max = 100
+cool_fan_speed_max = 80
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 8
 cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5)
@@ -23,7 +22,8 @@ cool_min_temperature = 250
 infill_sparse_density = 15
 material_final_print_temperature = =material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
-raft_airgap = =0.12 if extruder_nr == support_extruder_nr else 0
+raft_airgap = =0.1 if extruder_nr == support_extruder_nr else 0
+raft_base_infill_overlap = 20
 raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50
 skin_overlap = 10
 speed_layer_0 = =speed_print * 7/24
@@ -49,7 +49,7 @@ support_interface_density = 85
 support_interface_enable = True
 support_interface_pattern = zigzag
 support_line_width = 0.3
-support_material_flow = 95
+support_material_flow = 100
 support_pattern = zigzag
 support_roof_density = 85
 support_roof_wall_count = 1
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-pc-abs-fr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-pc-abs-fr-175_0.2mm.inst.cfg
index 4aef80925c..53498a3408 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-pc-abs-fr-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-pc-abs-fr-175_0.2mm.inst.cfg
@@ -13,9 +13,8 @@ weight = -2
 
 [values]
 cool_fan_enabled = =extruder_nr == support_extruder_nr
-cool_fan_speed = 75
 cool_fan_speed_0 = 0
-cool_fan_speed_max = 100
+cool_fan_speed_max = 80
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 8
 cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5)
@@ -23,7 +22,8 @@ cool_min_temperature = 250
 infill_sparse_density = 15
 material_final_print_temperature = =material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
-raft_airgap = =0.12 if extruder_nr == support_extruder_nr else 0
+raft_airgap = =0.1 if extruder_nr == support_extruder_nr else 0
+raft_base_infill_overlap = 20
 raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50
 skin_overlap = 10
 speed_layer_0 = =speed_print * 7/24
@@ -31,7 +31,7 @@ speed_prime_tower = =speed_print * 1/4
 speed_print = 120.0
 speed_roofing = =speed_print * 13/24
 speed_support = =speed_print * 1/2
-speed_support_bottom = 25
+speed_support_bottom = =speed_support * 1/4
 speed_support_interface = =speed_print * 15/24
 speed_topbottom = =speed_print * 11/24
 speed_wall = =speed_print * 5/24
@@ -41,7 +41,8 @@ support_bottom_angles = [135]
 support_bottom_density = 15
 support_bottom_distance = 0.1
 support_bottom_enable = True
-support_bottom_line_width = 0.6
+support_bottom_line_distance = =support_line_distance
+support_bottom_line_width = 0.8
 support_bottom_stair_step_height = 0
 support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135]
 support_infill_rate = 15.0
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pc-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pc-abs-175_0.2mm.inst.cfg
index b677bd5a0a..ef9005a45f 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pc-abs-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pc-abs-175_0.2mm.inst.cfg
@@ -13,9 +13,8 @@ weight = -2
 
 [values]
 cool_fan_enabled = =extruder_nr == support_extruder_nr
-cool_fan_speed = 75
 cool_fan_speed_0 = 0
-cool_fan_speed_max = 100
+cool_fan_speed_max = 80
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 8
 cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5)
@@ -23,7 +22,8 @@ cool_min_temperature = 250
 infill_sparse_density = 15
 material_final_print_temperature = =material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
-raft_airgap = =0.12 if extruder_nr == support_extruder_nr else 0
+raft_airgap = =0.1 if extruder_nr == support_extruder_nr else 0
+raft_base_infill_overlap = 20
 raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50
 skin_overlap = 10
 speed_layer_0 = =speed_print * 7/24
@@ -49,7 +49,7 @@ support_interface_density = 85
 support_interface_enable = True
 support_interface_pattern = zigzag
 support_line_width = 0.3
-support_material_flow = 95
+support_material_flow = 100
 support_pattern = zigzag
 support_roof_density = 85
 support_roof_wall_count = 1
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pc-abs-fr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pc-abs-fr-175_0.2mm.inst.cfg
index 7d4a6ac29d..3b5a15e0ec 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pc-abs-fr-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pc-abs-fr-175_0.2mm.inst.cfg
@@ -13,9 +13,8 @@ weight = -2
 
 [values]
 cool_fan_enabled = =extruder_nr == support_extruder_nr
-cool_fan_speed = 75
 cool_fan_speed_0 = 0
-cool_fan_speed_max = 100
+cool_fan_speed_max = 80
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 8
 cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5)
@@ -23,7 +22,8 @@ cool_min_temperature = 250
 infill_sparse_density = 15
 material_final_print_temperature = =material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
-raft_airgap = =0.12 if extruder_nr == support_extruder_nr else 0
+raft_airgap = =0.1 if extruder_nr == support_extruder_nr else 0
+raft_base_infill_overlap = 20
 raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50
 skin_overlap = 10
 speed_layer_0 = =speed_print * 7/24
@@ -31,7 +31,7 @@ speed_prime_tower = =speed_print * 1/4
 speed_print = 120.0
 speed_roofing = =speed_print * 13/24
 speed_support = =speed_print * 1/2
-speed_support_bottom = 25
+speed_support_bottom = =speed_support * 1/4
 speed_support_interface = =speed_print * 15/24
 speed_topbottom = =speed_print * 11/24
 speed_wall = =speed_print * 5/24
@@ -41,7 +41,8 @@ support_bottom_angles = [135]
 support_bottom_density = 15
 support_bottom_distance = 0.1
 support_bottom_enable = True
-support_bottom_line_width = 0.6
+support_bottom_line_distance = =support_line_distance
+support_bottom_line_width = 0.8
 support_bottom_stair_step_height = 0
 support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135]
 support_infill_rate = 15.0