diff --git a/resources/definitions/zyyx_agile.def.json b/resources/definitions/zyyx_agile.def.json
new file mode 100644
index 0000000000..62e4dba9ac
--- /dev/null
+++ b/resources/definitions/zyyx_agile.def.json
@@ -0,0 +1,57 @@
+{
+    "name": "ZYYX Agile",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "Magicfirm Europe",
+        "manufacturer": "Magicfirm Europe",
+        "file_formats": "application/x3g",
+        "platform": "zyyx_platform.stl",
+        "has_machine_quality": true,
+        "quality_definition": "zyyx_agile",
+        "preferred_quality_type": "normal",
+        "machine_x3g_variant": "z"
+    },
+
+    "overrides": {
+        "machine_name": { "default_value": "ZYYX Agile" },
+        "machine_start_gcode": {
+            "default_value": "; ZYYX 3D Printer start gcode\nM73 P0; enable build progress\nG21; set units to mm\nG90; set positioning to absolute\nG130 X80 Y80 A127 B127 ; Set Stepper Vref to default value\nG162 X Y F3000; home XY axes maximum\nM133 T0 ; stabilize extruder temperature\nG161 Z F450\nG161 Z F450; home Z axis minimum\nG92 X0 Y0 Z0 E0\nG1 X0 Y0 Z5 F200\nG161 Z F200; home Z axis minimum again\nG92 X0 Y0 Z0 E0\nM131 A; store surface calibration point 1\nG1 X0 Y0 Z5 F200\nG1 X-177 Y0 Z5 F3000; move to 2nd probing point\nG161 Z F200\nM131 B; store surface calibration point 2\nG92 X-177 Y0 Z0 E0\nG1 X-177 Y0 Z5 F200\nG1 X0 Y0 Z5 F3000; move to home point\nG161 Z F200; home Z axis minimum again\nG92 X0 Y0 Z0 E0; set reference again\nG1 X0 Y0 Z5 F200; clear Z\nG1 X0 Y-225 Z5 F3000; move to 3rd calibration point\nG161 Z F200\nM131 AB; store surface calibration point 3\nM132 AB; activate auto leveling\nG92 X0 Y-225 Z0 E0\nG1 X0 Y-225 Z5 F200\nG162 X Y F3000\nG161 Z F200\nG92 X135 Y115 Z0 E0\nM132 Z; Recall stored home offset for Z axis\nG1 X135 Y115 Z5 F450; clear nozzle from hole\nG1 X0 Y115 Z5 F3000; clear nozzle from hole\nG92 E0 ; Set E to 0"
+        },
+        "machine_end_gcode": {
+            "default_value": "; ZYYX 3D Printer end gcode\nM73 P100 ; end build progress\nG0 Z195 F1000 ; send Z axis to bottom of machine\nM104 S0 T0 ; cool down extruder\nM127 ; stop blower fan\nG162 X Y F3000 ; home XY maximum\nM18 ; disable stepper\nM70 P5 (ZYYX Print Finished!)\nM72 P1 ; play Ta-Da song\n"
+        },
+        "machine_width": { "default_value": 265 },
+        "machine_depth": { "default_value": 225 },
+        "machine_height": { "default_value": 195 },
+        "machine_center_is_zero": { "default_value": true },
+        "machine_gcode_flavor": { "default_value": "Makerbot" },
+        "machine_head_with_fans_polygon": { "default_value": [ [ -37, 50 ], [ 25, 50 ], [ 25, -40 ], [ -37, -40 ] ] },
+        "gantry_height": { "default_value": 10 },
+        "machine_steps_per_mm_x": { "default_value": "88.888889" },
+        "machine_steps_per_mm_y": { "default_value": "88.888889" },
+        "machine_steps_per_mm_z": { "default_value": "400" },
+        "machine_steps_per_mm_e": { "default_value": "96.27520187033366" },
+        "retraction_amount": { "default_value": 0.7 },
+        "retraction_speed": { "default_value": 15 },
+        "speed_print": { "default_value": 50 },
+        "speed_wall": { "value": 25 },
+        "speed_wall_x": { "value": 35 },
+        "speed_travel": { "value": 80 },
+        "speed_layer_0": { "value": 15 },
+        "support_interface_enable": { "default_value": true },
+        "support_interface_height": { "default_value": 0.8 },
+        "support_interface_density": { "default_value": 80 },
+        "support_interface_pattern": { "default_value": "grid" },
+        "infill_overlap": { "value": "12 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0" },
+        "retract_at_layer_change": { "default_value": true },
+        "travel_retract_before_outer_wall": { "default_value": true },
+        "material_initial_print_temperature": { "value": "material_print_temperature" },
+        "material_final_print_temperature": { "value": "material_print_temperature" },
+        "travel_avoid_other_parts": { "default_value": false },
+        "raft_airgap": { "default_value": 0.15 },
+        "raft_margin": { "default_value": 6 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}
diff --git a/resources/meshes/zyyx_platform.stl b/resources/meshes/zyyx_platform.stl
new file mode 100644
index 0000000000..fd2a768ee9
Binary files /dev/null and b/resources/meshes/zyyx_platform.stl differ
diff --git a/resources/quality/zyyx/zyyx_agile_pro_flex_fast.inst.cfg b/resources/quality/zyyx/zyyx_agile_pro_flex_fast.inst.cfg
new file mode 100644
index 0000000000..ec51eb5cc2
--- /dev/null
+++ b/resources/quality/zyyx/zyyx_agile_pro_flex_fast.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 3
+name = Fast
+definition = zyyx_agile
+
+[metadata]
+setting_version = 4
+type = quality
+quality_type = fast
+weight = 1
+material = zyyx_pro_flex
+
+[values]
+layer_height = 0.3
+wall_thickness = 0.8
+top_bottom_thickness = 1.0
+infill_sparse_density = 10
+default_material_print_temperature = 220
+material_print_temperature_layer_0 = 235
+retraction_amount = 1.0
+retraction_speed = 15
+speed_print = 20
+speed_wall = 20
+speed_wall_x = 20
+adhesion_type = brim
+material_flow = 105
+raft_airgap = 0.2
diff --git a/resources/quality/zyyx/zyyx_agile_pro_flex_fine.inst.cfg b/resources/quality/zyyx/zyyx_agile_pro_flex_fine.inst.cfg
new file mode 100644
index 0000000000..d1aacd309f
--- /dev/null
+++ b/resources/quality/zyyx/zyyx_agile_pro_flex_fine.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 3
+name = Fine
+definition = zyyx_agile
+
+[metadata]
+setting_version = 4
+type = quality
+quality_type = fine
+weight = 3
+material = zyyx_pro_flex
+
+[values]
+layer_height = 0.12
+wall_thickness = 1.2
+top_bottom_thickness = 1.0
+infill_sparse_density = 15
+default_material_print_temperature = 205
+material_print_temperature_layer_0 = 235
+retraction_amount = 0.2
+retraction_speed = 15
+speed_print = 15
+speed_wall = 15
+speed_wall_x = 15
+adhesion_type = brim
+material_flow = 105
+raft_airgap = 0.1
diff --git a/resources/quality/zyyx/zyyx_agile_pro_flex_normal.inst.cfg b/resources/quality/zyyx/zyyx_agile_pro_flex_normal.inst.cfg
new file mode 100644
index 0000000000..998a457d4a
--- /dev/null
+++ b/resources/quality/zyyx/zyyx_agile_pro_flex_normal.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 3
+name = Normal
+definition = zyyx_agile
+
+[metadata]
+setting_version = 4
+type = quality
+quality_type = normal
+weight = 2
+material = zyyx_pro_flex
+
+[values]
+layer_height = 0.2
+wall_thickness = 1.2
+top_bottom_thickness = 1.0
+infill_sparse_density = 15
+default_material_print_temperature = 210
+material_print_temperature_layer_0 = 235
+retraction_amount = 1.0
+retraction_speed = 15
+speed_print = 20
+speed_wall = 15
+speed_wall_x = 20
+adhesion_type = brim
+material_flow = 105
+raft_airgap = 0.2
diff --git a/resources/quality/zyyx/zyyx_agile_pro_pla_fast.inst.cfg b/resources/quality/zyyx/zyyx_agile_pro_pla_fast.inst.cfg
new file mode 100644
index 0000000000..8e53930c8d
--- /dev/null
+++ b/resources/quality/zyyx/zyyx_agile_pro_pla_fast.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 3
+name = Fast
+definition = zyyx_agile
+
+[metadata]
+setting_version = 4
+type = quality
+quality_type = fast
+weight = 1
+material = zyyx_pro_pla
+
+[values]
+layer_height = 0.3
+wall_thickness = 0.8
+top_bottom_thickness = 1.0
+infill_sparse_density = 10
+default_material_print_temperature = 220
+material_print_temperature_layer_0 = 225
+retraction_amount = 1.5
+retraction_speed = 20
+speed_print = 40
+speed_wall = 40
+speed_wall_x = 40
+adhesion_type = brim
+material_flow = 95
+raft_airgap = 0.15
diff --git a/resources/quality/zyyx/zyyx_agile_pro_pla_fine.inst.cfg b/resources/quality/zyyx/zyyx_agile_pro_pla_fine.inst.cfg
new file mode 100644
index 0000000000..07a70a7a5c
--- /dev/null
+++ b/resources/quality/zyyx/zyyx_agile_pro_pla_fine.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 3
+name = Fine
+definition = zyyx_agile
+
+[metadata]
+setting_version = 4
+type = quality
+quality_type = fine
+weight = 3
+material = zyyx_pro_pla
+
+[values]
+layer_height = 0.1
+wall_thickness = 1.2
+top_bottom_thickness = 1.0
+infill_sparse_density = 15
+default_material_print_temperature = 205
+material_print_temperature_layer_0 = 225
+retraction_amount = 0.4
+retraction_speed = 20
+speed_print = 35
+speed_wall = 18
+speed_wall_x = 25
+adhesion_type = brim
+material_flow = 95
+raft_airgap = 0.08
diff --git a/resources/quality/zyyx/zyyx_agile_pro_pla_normal.inst.cfg b/resources/quality/zyyx/zyyx_agile_pro_pla_normal.inst.cfg
new file mode 100644
index 0000000000..dc035605b1
--- /dev/null
+++ b/resources/quality/zyyx/zyyx_agile_pro_pla_normal.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 3
+name = Normal
+definition = zyyx_agile
+
+[metadata]
+setting_version = 4
+type = quality
+quality_type = normal
+weight = 2
+material = zyyx_pro_pla
+
+[values]
+layer_height = 0.2
+wall_thickness = 1.2
+top_bottom_thickness = 1.0
+infill_sparse_density = 15
+default_material_print_temperature = 210
+material_print_temperature_layer_0 = 225
+retraction_amount = 1.2
+retraction_speed = 20
+speed_print = 50
+speed_wall = 22
+speed_wall_x = 33
+adhesion_type = brim
+material_flow = 95
+raft_airgap = 0.15