Fix up whitespace

Mixing tabs and spaces and all that. Weird stuff.

Contributes to issue CURA-7803.

resources/definitions/koonovo_base.def.json

@@ -18,22 +18,14 @@
 
 
         "preferred_quality_type": "standard",
-        "preferred_material": "generic_pla",
+        "preferred_material": "generic_pla"
-
-"exclude_materials": [
-        ]
-
-
     },
 
         
     "overrides": {
-       
         "machine_start_gcode": {
             "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Move to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nM117 Printing..."
         },
-
-
         "machine_end_gcode": {
             "default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
         },

resources/definitions/koonovo_elf.def.json

@@ -21,6 +21,5 @@
     "metadata": {
         "quality_definition": "koonovo_base",
         "visible": true
-
     }
 }

resources/definitions/koonovo_kn3.def.json

@@ -11,33 +11,20 @@
         "quality_definition": "koonovo_base",
 
         "first_start_actions": ["MachineSettingsAction"],
-	 "machine_extruder_trains": 
+        "machine_extruder_trains": {
-	 {
             "0": "koonovo_kn3_extruder_0",
             "1": "koonovo_kn3_extruder_1"
         },
 
-
-
-
         "has_materials": true,
         "has_machine_quality": true,
 
-     
         "preferred_quality_type": "standard",
-        "preferred_material": "generic_pla",
+        "preferred_material": "generic_pla"
-
-
-"exclude_materials": [
-        ]
-
-
     },
 
-        
     "overrides": {
-
+        "machine_name": { "default_value": "Koonovo KN3" },
-        "machine_name": { "default_value": "KOONOVO KN3" },
         "machine_width": { "default_value": 310 },
         "machine_depth": { "default_value": 310 },
         "machine_height": { "default_value": 400 },
@@ -51,19 +38,15 @@
 
         "gantry_height": { "value": 0 },
 
-
         "machine_extruder_count": { "default_value": 2 },
        
         "machine_start_gcode": {
             "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Move to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nM117 Printing..."
         },
-
-
         "machine_end_gcode": {
             "default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
         },
 
-
         "machine_max_feedrate_x": { "value": 200 },
         "machine_max_feedrate_y": { "value": 200 },
         "machine_max_feedrate_z": { "value": 50 },
@@ -154,7 +137,5 @@
         "brim_replaces_support": { "value": false },
         "skirt_gap": { "value": 6.0 },
         "skirt_line_count": { "value": 3 }
-
-
     }
 }

resources/definitions/koonovo_kn5.def.json

@@ -11,33 +11,21 @@
         "quality_definition": "koonovo_base",
 
         "first_start_actions": ["MachineSettingsAction"],
-	 "machine_extruder_trains": 
+        "machine_extruder_trains": {
-	 {
             "0": "koonovo_kn5_extruder_0",
             "1": "koonovo_kn5_extruder_1"
         },
 
-
-
-
         "has_materials": true,
         "has_machine_quality": true,
 
-     
         "preferred_quality_type": "standard",
-        "preferred_material": "generic_pla",
+        "preferred_material": "generic_pla"
-
-
-"exclude_materials": [
-        ]
-
-
     },
 
         
     "overrides": {
-
+        "machine_name": { "default_value": "Koonovo KN5" },
-        "machine_name": { "default_value": "KOONOVO KN5" },
         "machine_width": { "default_value": 420 },
         "machine_depth": { "default_value": 420 },
         "machine_height": { "default_value": 400 },
@@ -57,13 +45,10 @@
         "machine_start_gcode": {
             "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Move to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nM117 Printing..."
         },
-
-
         "machine_end_gcode": {
             "default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
         },
 
-
         "machine_max_feedrate_x": { "value": 200 },
         "machine_max_feedrate_y": { "value": 200 },
         "machine_max_feedrate_z": { "value": 50 },
@@ -153,7 +138,5 @@
         "brim_replaces_support": { "value": false },
         "skirt_gap": { "value": 6.0 },
         "skirt_line_count": { "value": 3 }
-
-
     }
 }

resources/definitions/koonovo_pyramid.def.json

@@ -16,11 +16,9 @@
         },
 
         "gantry_height": { "value": 0 }
-
     },
     "metadata": {
         "quality_definition": "koonovo_base",
         "visible": true
-
     }
 }