diff --git a/resources/definitions/ultimaker_method.def.json b/resources/definitions/ultimaker_method.def.json
index d2813ea8a3..b9b8e1b378 100644
--- a/resources/definitions/ultimaker_method.def.json
+++ b/resources/definitions/ultimaker_method.def.json
@@ -33,7 +33,7 @@
             "leapfrog_",
             "polyflex_pla",
             "polymax_pla",
-            "polymaker_polymax_pc_175",
+            "polymaker_",
             "polyplus_pla",
             "polywood_pla",
             "redd_",
diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_polymaker-polylite-pc-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_polymaker-polylite-pc-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..7f5cdf81d8
--- /dev/null
+++ b/resources/quality/ultimaker_methodx/um_methodx_labs_polymaker-polylite-pc-175_0.2mm.inst.cfg
@@ -0,0 +1,58 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = polymaker_polylite_pc_175
+quality_type = draft
+setting_version = 25
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = True
+cool_fan_full_layer = 6
+cool_fan_speed_max = 100
+cool_min_layer_time = 8
+cool_min_layer_time_fan_speed_max = 5
+cool_min_speed = 10
+raft_airgap = 0.22
+raft_interface_fan_speed = 0
+raft_interface_line_spacing = 0.7
+raft_interface_line_width = 0.55
+raft_interface_speed = 25
+raft_interface_thickness = 0.25
+raft_surface_fan_speed = 0
+raft_surface_speed = 50
+raft_surface_thickness = 0.25
+speed_print = 90
+speed_wall_0 = 30
+speed_wall_x = =speed_wall
+support_angle = 52
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_bottom_stair_step_height = 0.3
+support_fan_enable = True
+support_infill_angles = [45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135,135,135,135,135,135]
+support_infill_rate = 10
+support_interface_density = 83
+support_interface_height = =layer_height * 4
+support_interface_offset = 1.2
+support_interface_wall_count = 0
+support_line_width = 0.35
+support_material_flow = 90
+support_offset = 1.5
+support_roof_density = =extruderValue(support_roof_extruder_nr, 'support_interface_density')
+support_roof_height = =support_interface_height
+support_roof_wall_count = 1
+support_supported_skin_fan_speed = 100
+support_xy_distance = 0.35
+support_xy_overrides_z = xy_overrides_z
+support_z_distance = 0.22
+top_skin_expand_distance = 2.4
+wall_overhang_angle = 30
+wall_overhang_speed_factors = [40]
+
diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_polymaker-polymax-pc-fr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_polymaker-polymax-pc-fr-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..9cb489d3cb
--- /dev/null
+++ b/resources/quality/ultimaker_methodx/um_methodx_labs_polymaker-polymax-pc-fr-175_0.2mm.inst.cfg
@@ -0,0 +1,58 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = polymaker_polymax_pc_fr_175
+quality_type = draft
+setting_version = 25
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = True
+cool_fan_full_layer = 6
+cool_fan_speed_max = 100
+cool_min_layer_time = 8
+cool_min_layer_time_fan_speed_max = 5
+cool_min_speed = 10
+raft_airgap = 0.22
+raft_interface_fan_speed = 0
+raft_interface_line_spacing = 0.7
+raft_interface_line_width = 0.55
+raft_interface_speed = 25
+raft_interface_thickness = 0.25
+raft_surface_fan_speed = 0
+raft_surface_speed = 50
+raft_surface_thickness = 0.25
+speed_print = 50
+speed_wall_0 = 30
+speed_wall_x = =speed_wall
+support_angle = 52
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_bottom_stair_step_height = 0.3
+support_fan_enable = True
+support_infill_angles = [45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135,135,135,135,135,135]
+support_infill_rate = 10
+support_interface_density = 83
+support_interface_height = =layer_height * 4
+support_interface_offset = 1.2
+support_interface_wall_count = 0
+support_line_width = 0.35
+support_material_flow = 90
+support_offset = 1.5
+support_roof_density = =extruderValue(support_roof_extruder_nr, 'support_interface_density')
+support_roof_height = =support_interface_height
+support_roof_wall_count = 1
+support_supported_skin_fan_speed = 100
+support_xy_distance = 0.35
+support_xy_overrides_z = xy_overrides_z
+support_z_distance = 0.22
+top_skin_expand_distance = 2.4
+wall_overhang_angle = 30
+wall_overhang_speed_factors = [40]
+
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_polymaker-polylite-pc-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_polymaker-polylite-pc-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..b51075e617
--- /dev/null
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_polymaker-polylite-pc-175_0.2mm.inst.cfg
@@ -0,0 +1,58 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = polymaker_polylite_pc_175
+quality_type = draft
+setting_version = 25
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = True
+cool_fan_full_layer = 6
+cool_fan_speed_max = 100
+cool_min_layer_time = 8
+cool_min_layer_time_fan_speed_max = 5
+cool_min_speed = 10
+raft_airgap = 0.22
+raft_interface_fan_speed = 0
+raft_interface_line_spacing = 0.7
+raft_interface_line_width = 0.55
+raft_interface_speed = 25
+raft_interface_thickness = 0.25
+raft_surface_fan_speed = 0
+raft_surface_speed = 50
+raft_surface_thickness = 0.25
+speed_print = 90
+speed_wall_0 = 30
+speed_wall_x = =speed_wall
+support_angle = 52
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_bottom_stair_step_height = 0.3
+support_fan_enable = True
+support_infill_angles = [45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135,135,135,135,135,135]
+support_infill_rate = 10
+support_interface_density = 83
+support_interface_height = =layer_height * 4
+support_interface_offset = 1.2
+support_interface_wall_count = 0
+support_line_width = 0.35
+support_material_flow = 90
+support_offset = 1.5
+support_roof_density = =extruderValue(support_roof_extruder_nr, 'support_interface_density')
+support_roof_height = =support_interface_height
+support_roof_wall_count = 1
+support_supported_skin_fan_speed = 100
+support_xy_distance = 0.35
+support_xy_overrides_z = xy_overrides_z
+support_z_distance = 0.22
+top_skin_expand_distance = 2.4
+wall_overhang_angle = 30
+wall_overhang_speed_factors = [40]
+
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_polymaker-polymax-pc-fr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_polymaker-polymax-pc-fr-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..879b30f355
--- /dev/null
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_polymaker-polymax-pc-fr-175_0.2mm.inst.cfg
@@ -0,0 +1,58 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = polymaker_polymax_pc_fr_175
+quality_type = draft
+setting_version = 25
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = True
+cool_fan_full_layer = 6
+cool_fan_speed_max = 100
+cool_min_layer_time = 8
+cool_min_layer_time_fan_speed_max = 5
+cool_min_speed = 10
+raft_airgap = 0.22
+raft_interface_fan_speed = 0
+raft_interface_line_spacing = 0.7
+raft_interface_line_width = 0.55
+raft_interface_speed = 25
+raft_interface_thickness = 0.25
+raft_surface_fan_speed = 0
+raft_surface_speed = 50
+raft_surface_thickness = 0.25
+speed_print = 50
+speed_wall_0 = 30
+speed_wall_x = =speed_wall
+support_angle = 52
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_bottom_stair_step_height = 0.3
+support_fan_enable = True
+support_infill_angles = [45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135,135,135,135,135,135]
+support_infill_rate = 10
+support_interface_density = 83
+support_interface_height = =layer_height * 4
+support_interface_offset = 1.2
+support_interface_wall_count = 0
+support_line_width = 0.35
+support_material_flow = 90
+support_offset = 1.5
+support_roof_density = =extruderValue(support_roof_extruder_nr, 'support_interface_density')
+support_roof_height = =support_interface_height
+support_roof_wall_count = 1
+support_supported_skin_fan_speed = 100
+support_xy_distance = 0.35
+support_xy_overrides_z = xy_overrides_z
+support_z_distance = 0.22
+top_skin_expand_distance = 2.4
+wall_overhang_angle = 30
+wall_overhang_speed_factors = [40]
+