diff --git a/resources/quality/twotrees/tpu/two_trees_0.3_TPU_adaptive.inst.cfg b/resources/quality/twotrees/tpu/two_trees_0.3_TPU_adaptive.inst.cfg
index 7215c521f5..1de9b8968d 100644
--- a/resources/quality/twotrees/tpu/two_trees_0.3_TPU_adaptive.inst.cfg
+++ b/resources/quality/twotrees/tpu/two_trees_0.3_TPU_adaptive.inst.cfg
@@ -12,14 +12,14 @@ variant = 0.3mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.2
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7
\ No newline at end of file
diff --git a/resources/quality/twotrees/tpu/two_trees_0.3_TPU_standard.inst.cfg b/resources/quality/twotrees/tpu/two_trees_0.3_TPU_standard.inst.cfg
index f153d164db..f2f20b55cd 100644
--- a/resources/quality/twotrees/tpu/two_trees_0.3_TPU_standard.inst.cfg
+++ b/resources/quality/twotrees/tpu/two_trees_0.3_TPU_standard.inst.cfg
@@ -12,14 +12,14 @@ variant = 0.3mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.4
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7
\ No newline at end of file
diff --git a/resources/quality/twotrees/tpu/two_trees_0.3_TPU_super.inst.cfg b/resources/quality/twotrees/tpu/two_trees_0.3_TPU_super.inst.cfg
index bb8bddfdd6..8378bbf262 100644
--- a/resources/quality/twotrees/tpu/two_trees_0.3_TPU_super.inst.cfg
+++ b/resources/quality/twotrees/tpu/two_trees_0.3_TPU_super.inst.cfg
@@ -12,14 +12,14 @@ variant = 0.3mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.2
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7
\ No newline at end of file
diff --git a/resources/quality/twotrees/tpu/two_trees_0.4_TPU_adaptive.inst.cfg b/resources/quality/twotrees/tpu/two_trees_0.4_TPU_adaptive.inst.cfg
index 18594cfa6f..dd46c61dff 100644
--- a/resources/quality/twotrees/tpu/two_trees_0.4_TPU_adaptive.inst.cfg
+++ b/resources/quality/twotrees/tpu/two_trees_0.4_TPU_adaptive.inst.cfg
@@ -12,14 +12,14 @@ variant = 0.4mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.2
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7
\ No newline at end of file
diff --git a/resources/quality/twotrees/tpu/two_trees_0.4_TPU_standard.inst.cfg b/resources/quality/twotrees/tpu/two_trees_0.4_TPU_standard.inst.cfg
index 791a598866..bfac3a2db4 100644
--- a/resources/quality/twotrees/tpu/two_trees_0.4_TPU_standard.inst.cfg
+++ b/resources/quality/twotrees/tpu/two_trees_0.4_TPU_standard.inst.cfg
@@ -12,14 +12,14 @@ variant = 0.4mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.3
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7
\ No newline at end of file
diff --git a/resources/quality/twotrees/tpu/two_trees_0.4_TPU_super.inst.cfg b/resources/quality/twotrees/tpu/two_trees_0.4_TPU_super.inst.cfg
index 34001ea859..136f0cf27f 100644
--- a/resources/quality/twotrees/tpu/two_trees_0.4_TPU_super.inst.cfg
+++ b/resources/quality/twotrees/tpu/two_trees_0.4_TPU_super.inst.cfg
@@ -12,14 +12,14 @@ variant = 0.4mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.2
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7
\ No newline at end of file
diff --git a/resources/quality/twotrees/tpu/two_trees_0.5_TPU_adaptive.inst.cfg b/resources/quality/twotrees/tpu/two_trees_0.5_TPU_adaptive.inst.cfg
index a9f9bc88c8..e92af4cb94 100644
--- a/resources/quality/twotrees/tpu/two_trees_0.5_TPU_adaptive.inst.cfg
+++ b/resources/quality/twotrees/tpu/two_trees_0.5_TPU_adaptive.inst.cfg
@@ -12,14 +12,14 @@ variant = 0.5mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.2
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7
\ No newline at end of file
diff --git a/resources/quality/twotrees/tpu/two_trees_0.5_TPU_standard.inst.cfg b/resources/quality/twotrees/tpu/two_trees_0.5_TPU_standard.inst.cfg
index 1ab113c776..cfd6b56620 100644
--- a/resources/quality/twotrees/tpu/two_trees_0.5_TPU_standard.inst.cfg
+++ b/resources/quality/twotrees/tpu/two_trees_0.5_TPU_standard.inst.cfg
@@ -12,14 +12,14 @@ variant = 0.5mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.3
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7
\ No newline at end of file
diff --git a/resources/quality/twotrees/tpu/two_trees_0.5_TPU_super.inst.cfg b/resources/quality/twotrees/tpu/two_trees_0.5_TPU_super.inst.cfg
index 22df74f001..e79c81785c 100644
--- a/resources/quality/twotrees/tpu/two_trees_0.5_TPU_super.inst.cfg
+++ b/resources/quality/twotrees/tpu/two_trees_0.5_TPU_super.inst.cfg
@@ -12,14 +12,14 @@ variant = 0.5mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.2
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7
\ No newline at end of file
diff --git a/resources/quality/twotrees/tpu/two_trees_0.6_TPU_standard.inst.cfg b/resources/quality/twotrees/tpu/two_trees_0.6_TPU_standard.inst.cfg
index 8328a94406..2f01294dc8 100644
--- a/resources/quality/twotrees/tpu/two_trees_0.6_TPU_standard.inst.cfg
+++ b/resources/quality/twotrees/tpu/two_trees_0.6_TPU_standard.inst.cfg
@@ -12,14 +12,14 @@ variant = 0.6mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.3
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7
\ No newline at end of file
diff --git a/resources/quality/twotrees/tpu/two_trees_0.8_TPU_draft.inst.cfg b/resources/quality/twotrees/tpu/two_trees_0.8_TPU_draft.inst.cfg
index 05256c63f7..2b7d57fd99 100644
--- a/resources/quality/twotrees/tpu/two_trees_0.8_TPU_draft.inst.cfg
+++ b/resources/quality/twotrees/tpu/two_trees_0.8_TPU_draft.inst.cfg
@@ -12,14 +12,14 @@ variant = 0.8mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.4
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7
\ No newline at end of file
diff --git a/resources/quality/twotrees/tpu/two_trees_1.0_TPU_draft.inst.cfg b/resources/quality/twotrees/tpu/two_trees_1.0_TPU_draft.inst.cfg
index e7d38b5e44..328ee50ea0 100644
--- a/resources/quality/twotrees/tpu/two_trees_1.0_TPU_draft.inst.cfg
+++ b/resources/quality/twotrees/tpu/two_trees_1.0_TPU_draft.inst.cfg
@@ -12,14 +12,14 @@ variant = 1.0mm Nozzle
 
 [values]
 material_bed_temperature = 0
-material_print_temperature_layer_0 = 205
-material_print_temperature = 200
+material_print_temperature_layer_0 = 210
+material_print_temperature = 210
 material_standby_temperature = =material_print_temperature
 material_initial_print_temperature= =material_print_temperature
 material_final_print_temperature= =material_print_temperature
 cool_fan_enabled = True
 retraction_hop = 0.4
 retraction_hop_only_when_collides = True
-speed_print = 40
+speed_print = 20
 retraction_speed = 40
 retraction_amount = 7
\ No newline at end of file