diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json index ff9a75c40c..47a60fe51c 100644 --- a/resources/definitions/ultimaker.def.json +++ b/resources/definitions/ultimaker.def.json @@ -6,7 +6,7 @@ "author": "Ultimaker", "manufacturer": "Ultimaker B.V.", "visible": false, - "exclude_materials": [ "generic_hips", "generic_petg", "structur3d_dap100silicone" ] + "exclude_materials": [ "generic_hips", "structur3d_dap100silicone" ] }, "overrides": { "machine_max_feedrate_e": { diff --git a/resources/definitions/ultimaker2.def.json b/resources/definitions/ultimaker2.def.json index 3980baba31..c028363239 100644 --- a/resources/definitions/ultimaker2.def.json +++ b/resources/definitions/ultimaker2.def.json @@ -18,7 +18,8 @@ { "0": "ultimaker2_extruder_0" }, - "firmware_file": "MarlinUltimaker2.hex" + "firmware_file": "MarlinUltimaker2.hex", + "exclude_materials": [ "generic_hips", "generic_petg", "structur3d_dap100silicone", "ultimaker_petg_red", "ultimaker_petg_blue", "ultimaker_petg_grey", "ultimaker_petg_black", "ultimaker_petg_green", "ultimaker_petg_white", "ultimaker_petg_orange", "ultimaker_petg_silver", "ultimaker_petg_yellow", "ultimaker_petg_transparent", "ultimaker_petg_red_translucent", "ultimaker_petg_blue_translucent", "ultimaker_petg_green_translucent", "ultimaker_petg_yellow_fluorescent"] }, "overrides": { "machine_name": { "default_value": "Ultimaker 2" }, diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index d831221852..9a25167431 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -13,7 +13,7 @@ "has_machine_quality": true, "has_materials": true, "has_variants": true, - "exclude_materials": [ "generic_hips", "generic_petg", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", "structur3d_dap100silicone" ], + "exclude_materials": [ "generic_hips", "generic_petg", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", "structur3d_dap100silicone", "ultimaker_petg_blue", "ultimaker_petg_grey", "ultimaker_petg_black", "ultimaker_petg_green", "ultimaker_petg_white", "ultimaker_petg_orange", "ultimaker_petg_silver", "ultimaker_petg_yellow", "ultimaker_petg_transparent", "ultimaker_petg_red_translucent", "ultimaker_petg_blue_translucent", "ultimaker_petg_green_translucent", "ultimaker_petg_yellow_fluorescent" ], "preferred_variant_name": "AA 0.4", "preferred_quality_type": "normal", "variants_name": "Print core", diff --git a/resources/definitions/ultimaker_original.def.json b/resources/definitions/ultimaker_original.def.json index 34d22934d6..2ade9f1c5c 100644 --- a/resources/definitions/ultimaker_original.def.json +++ b/resources/definitions/ultimaker_original.def.json @@ -11,7 +11,7 @@ "platform": "ultimaker_platform.3mf", "has_materials": true, "has_machine_quality": true, - "exclude_materials": ["generic_hips", "generic_petg", "generic_bam", "ultimaker_bam", "generic_pva", "ultimaker_pva", "generic_tough_pla", "ultimaker_tough_pla_black", "ultimaker_tough_pla_green", "ultimaker_tough_pla_red", "ultimaker_tough_pla_white", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", "structur3d_dap100silicone" ], + "exclude_materials": ["generic_hips", "generic_petg", "generic_bam", "ultimaker_bam", "generic_pva", "ultimaker_pva", "generic_tough_pla", "ultimaker_tough_pla_black", "ultimaker_tough_pla_green", "ultimaker_tough_pla_red", "ultimaker_tough_pla_white", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", "structur3d_dap100silicone", "ultimaker_petg_blue", "ultimaker_petg_grey", "ultimaker_petg_black", "ultimaker_petg_green", "ultimaker_petg_white", "ultimaker_petg_orange", "ultimaker_petg_silver", "ultimaker_petg_yellow", "ultimaker_petg_transparent", "ultimaker_petg_red_translucent", "ultimaker_petg_blue_translucent", "ultimaker_petg_green_translucent", "ultimaker_petg_yellow_fluorescent" ], "first_start_actions": ["UMOUpgradeSelection", "BedLevel"], "supported_actions": ["UMOUpgradeSelection", "BedLevel"], "machine_extruder_trains": diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.25_normal.inst.cfg new file mode 100644 index 0000000000..260f9623f1 --- /dev/null +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.25_normal.inst.cfg @@ -0,0 +1,24 @@ +[general] +version = 4 +name = Extra Fine +definition = ultimaker2_plus_connect + +[metadata] +setting_version = 16 +type = quality +quality_type = high +weight = 1 +material = generic_petg +variant = 0.25 mm + +[values] +cool_fan_speed_min = =cool_fan_speed * 0.2 +cool_min_layer_time = 2 +cool_min_layer_time_fan_speed_max = 25 +cool_min_speed = 15 +infill_sparse_density = 20 +speed_layer_0 = 30 +speed_print = 30 +top_bottom_thickness = 0.72 +wall_thickness = 0.88 +retraction_combing_max_distance = 50 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_draft.inst.cfg new file mode 100644 index 0000000000..b42fc2eca3 --- /dev/null +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_draft.inst.cfg @@ -0,0 +1,30 @@ +[general] +version = 4 +name = Fast +definition = ultimaker2_plus_connect + +[metadata] +setting_version = 16 +type = quality +quality_type = draft +weight = -2 +material = generic_petg +variant = 0.4 mm + +[values] +cool_fan_speed_min = =cool_fan_speed * 0.8 +cool_min_layer_time = 3 +cool_min_layer_time_fan_speed_max = 15 +cool_min_speed = 10 +infill_sparse_density = 20 +speed_layer_0 = 30 +speed_print = 45 +speed_travel = 150 +speed_wall = =math.ceil(speed_print * 40 / 45) +top_bottom_thickness = 0.75 +wall_thickness = 0.7 +speed_wall_0 = =math.ceil(speed_print * 30 / 45) +speed_topbottom = =math.ceil(speed_print * 30 / 45) +speed_wall_x = =math.ceil(speed_print * 40 / 45) +speed_infill = =math.ceil(speed_print * 45 / 45) +retraction_combing_max_distance = 50 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_fast.inst.cfg new file mode 100644 index 0000000000..e05ee0232e --- /dev/null +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_fast.inst.cfg @@ -0,0 +1,30 @@ +[general] +version = 4 +name = Normal +definition = ultimaker2_plus_connect + +[metadata] +setting_version = 16 +type = quality +quality_type = fast +weight = -1 +material = generic_petg +variant = 0.4 mm + +[values] +cool_fan_speed_min = =cool_fan_speed * 0.8 +cool_min_layer_time = 3 +cool_min_layer_time_fan_speed_max = 15 +cool_min_speed = 10 +infill_sparse_density = 20 +speed_layer_0 = 30 +speed_print = 45 +speed_travel = 150 +speed_wall = =math.ceil(speed_print * 40 / 45) +top_bottom_thickness = 0.75 +wall_thickness = 0.7 +speed_wall_0 = =math.ceil(speed_print * 30 / 45) +speed_topbottom = =math.ceil(speed_print * 30 / 45) +speed_wall_x = =math.ceil(speed_print * 40 / 45) +speed_infill = =math.ceil(speed_print * 45 / 45) +retraction_combing_max_distance = 50 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_normal.inst.cfg new file mode 100644 index 0000000000..6f918ac1de --- /dev/null +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_normal.inst.cfg @@ -0,0 +1,25 @@ +[general] +version = 4 +name = Fine +definition = ultimaker2_plus_connect + +[metadata] +setting_version = 16 +type = quality +quality_type = normal +weight = 0 +material = generic_petg +variant = 0.4 mm + +[values] +cool_fan_speed_min = =cool_fan_speed * 0.8 +cool_min_layer_time = 3 +cool_min_layer_time_fan_speed_max = 15 +cool_min_speed = 10 +infill_sparse_density = 20 +speed_layer_0 = 30 +speed_print = 45 +speed_wall = =math.ceil(speed_print * 30 / 45) +top_bottom_thickness = 0.8 +wall_thickness = 1.05 +retraction_combing_max_distance = 50 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.6_normal.inst.cfg new file mode 100644 index 0000000000..e0f36471f6 --- /dev/null +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.6_normal.inst.cfg @@ -0,0 +1,24 @@ +[general] +version = 4 +name = Fine +definition = ultimaker2_plus_connect + +[metadata] +setting_version = 16 +type = quality +quality_type = fast +weight = 0 +material = generic_petg +variant = 0.6 mm + +[values] +cool_fan_speed_min = =cool_fan_speed * 0.8 +cool_min_layer_time = 5 +cool_min_layer_time_fan_speed_max = 20 +cool_min_speed = 8 +infill_sparse_density = 20 +speed_layer_0 = 30 +speed_print = 40 +top_bottom_thickness = 1.2 +wall_thickness = 1.59 +retraction_combing_max_distance = 50 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.8_normal.inst.cfg new file mode 100644 index 0000000000..2ca91605c2 --- /dev/null +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.8_normal.inst.cfg @@ -0,0 +1,24 @@ +[general] +version = 4 +name = Normal +definition = ultimaker2_plus_connect + +[metadata] +setting_version = 16 +type = quality +quality_type = draft +weight = -1 +material = generic_petg +variant = 0.8 mm + +[values] +cool_fan_speed_min = =cool_fan_speed * 0.8 +cool_min_layer_time = 3 +cool_min_layer_time_fan_speed_max = 25 +cool_min_speed = 8 +infill_sparse_density = 20 +speed_layer_0 = 30 +speed_print = 40 +top_bottom_thickness = 1.2 +wall_thickness = 2.1 +retraction_combing_max_distance = 50 \ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..c1bc16cb21 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg @@ -0,0 +1,23 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 16 +type = quality +quality_type = normal +weight = 0 +material = generic_petg +variant = AA 0.25 + +[values] +retraction_combing_max_distance = 50 +retraction_extrusion_window = 0.5 +speed_infill = =math.ceil(speed_print * 40 / 55) +speed_topbottom = =math.ceil(speed_print * 30 / 55) +top_bottom_thickness = 0.8 +wall_thickness = 0.92 +initial_layer_line_width_factor = 100 +infill_before_walls = true +material_print_temperature = =default_material_print_temperature - 5 \ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg new file mode 100644 index 0000000000..c258df2bea --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg @@ -0,0 +1,30 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 16 +type = quality +quality_type = draft +weight = -2 +material = generic_petg +variant = AA 0.4 + +[values] +material_print_temperature = =default_material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature - 5 +retraction_combing_max_distance = 50 +skin_overlap = 20 +speed_print = 60 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) +speed_topbottom = =math.ceil(speed_print * 35 / 60) +speed_wall = =math.ceil(speed_print * 45 / 60) +speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +wall_thickness = 1 + + +infill_pattern = triangles +speed_infill = =math.ceil(speed_print * 50 / 60) +initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg new file mode 100644 index 0000000000..b645e9cccb --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg @@ -0,0 +1,28 @@ +[general] +version = 4 +name = Normal +definition = ultimaker_s3 + +[metadata] +setting_version = 16 +type = quality +quality_type = fast +weight = -1 +material = generic_petg +variant = AA 0.4 + +[values] +cool_min_speed = 7 +material_print_temperature = =default_material_print_temperature +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 +retraction_combing_max_distance = 50 +speed_print = 60 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) +speed_topbottom = =math.ceil(speed_print * 30 / 60) +speed_wall = =math.ceil(speed_print * 40 / 60) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) + +infill_pattern = triangles +speed_infill = =math.ceil(speed_print * 50 / 60) +initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg new file mode 100644 index 0000000000..c090a42562 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg @@ -0,0 +1,29 @@ +[general] +version = 4 +name = Extra Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 16 +type = quality +quality_type = high +weight = 1 +material = generic_petg +variant = AA 0.4 + +[values] +cool_min_speed = 12 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = =default_material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 10 +material_final_print_temperature = =material_print_temperature - 15 +retraction_combing_max_distance = 50 +speed_print = 50 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) +speed_topbottom = =math.ceil(speed_print * 30 / 50) +speed_wall = =math.ceil(speed_print * 30 / 50) + +infill_pattern = triangles +speed_infill = =math.ceil(speed_print * 40 / 50) +initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..27232f3a52 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg @@ -0,0 +1,28 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 16 +type = quality +quality_type = normal +weight = 0 +material = generic_petg +variant = AA 0.4 + +[values] +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = =default_material_print_temperature - 5 +material_initial_print_temperature = =material_print_temperature - 10 +material_final_print_temperature = =material_print_temperature - 15 +retraction_combing_max_distance = 50 +speed_print = 55 +speed_layer_0 = =math.ceil(speed_print * 20 / 55) +speed_topbottom = =math.ceil(speed_print * 30 / 55) +speed_wall = =math.ceil(speed_print * 30 / 55) + +infill_pattern = triangles +speed_infill = =math.ceil(speed_print * 45 / 55) +initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg new file mode 100644 index 0000000000..66c24a6d8e --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg @@ -0,0 +1,27 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 16 +type = quality +quality_type = draft +weight = -2 +material = generic_petg +variant = AA 0.8 + +[values] +brim_width = 7 +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature - 5 +material_standby_temperature = 100 +prime_tower_enable = True +retraction_combing_max_distance = 50 +speed_print = 40 +speed_topbottom = =math.ceil(speed_print * 25 / 40) +speed_wall = =math.ceil(speed_print * 30 / 40) +jerk_travel = 50 +cool_fan_speed = 20 +initial_layer_line_width_factor = 100 +infill_before_walls = true \ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg new file mode 100644 index 0000000000..6dd50e22b5 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -0,0 +1,28 @@ +[general] +version = 4 +name = Sprint +definition = ultimaker_s3 + +[metadata] +setting_version = 16 +type = quality +quality_type = superdraft +weight = -4 +material = generic_petg +variant = AA 0.8 + +[values] +brim_width = 7 +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature - 5 +material_standby_temperature = 100 +prime_tower_enable = True +retraction_combing_max_distance = 50 +speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 30 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +jerk_travel = 50 +cool_fan_speed = 20 +initial_layer_line_width_factor = 100 +infill_before_walls = true \ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg new file mode 100644 index 0000000000..04e1baf3a7 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -0,0 +1,28 @@ +[general] +version = 4 +name = Extra Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 16 +type = quality +quality_type = verydraft +weight = -3 +material = generic_petg +variant = AA 0.8 + +[values] +brim_width = 7 +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature - 5 +material_standby_temperature = 100 +prime_tower_enable = True +retraction_combing_max_distance = 50 +speed_print = 40 +speed_topbottom = =math.ceil(speed_print * 25 / 40) +speed_wall = =math.ceil(speed_print * 30 / 40) +jerk_travel = 50 +cool_fan_speed = 20 +layer_height_0 = 0.27 +initial_layer_line_width_factor = 100 +infill_before_walls = true diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..97c27ff13d --- /dev/null +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg @@ -0,0 +1,23 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s5 + +[metadata] +setting_version = 16 +type = quality +quality_type = normal +weight = 0 +material = generic_petg +variant = AA 0.25 + +[values] +retraction_combing_max_distance = 50 +retraction_extrusion_window = 0.5 +speed_infill = =math.ceil(speed_print * 40 / 55) +speed_topbottom = =math.ceil(speed_print * 30 / 55) +top_bottom_thickness = 0.8 +wall_thickness = 0.92 +initial_layer_line_width_factor = 100 +infill_before_walls = true +material_print_temperature = =default_material_print_temperature - 5 \ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg new file mode 100644 index 0000000000..e8065268dd --- /dev/null +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg @@ -0,0 +1,31 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s5 + +[metadata] +setting_version = 16 +type = quality +quality_type = draft +weight = -2 +material = generic_petg +variant = AA 0.4 + +[values] +material_print_temperature = =default_material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature - 5 +retraction_combing_max_distance = 50 +skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0 +skin_overlap = 20 +speed_print = 60 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) +speed_topbottom = =math.ceil(speed_print * 35 / 60) +speed_wall = =math.ceil(speed_print * 45 / 60) +speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +top_thickness = =0.8 if infill_sparse_density < 30 and skin_edge_support_thickness == 0.8 else top_bottom_thickness +wall_thickness = 1 + +infill_pattern = triangles +speed_infill = =math.ceil(speed_print * 50 / 60) +initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg new file mode 100644 index 0000000000..509e6d0dba --- /dev/null +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg @@ -0,0 +1,28 @@ +[general] +version = 4 +name = Normal +definition = ultimaker_s5 + +[metadata] +setting_version = 16 +type = quality +quality_type = fast +weight = -1 +material = generic_petg +variant = AA 0.4 + +[values] +cool_min_speed = 7 +material_print_temperature = =default_material_print_temperature +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 +retraction_combing_max_distance = 50 +speed_print = 60 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) +speed_topbottom = =math.ceil(speed_print * 30 / 60) +speed_wall = =math.ceil(speed_print * 40 / 60) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) + +infill_pattern = triangles +speed_infill = =math.ceil(speed_print * 50 / 60) +initial_layer_line_width_factor = 100 \ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg new file mode 100644 index 0000000000..f5de46b389 --- /dev/null +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg @@ -0,0 +1,29 @@ +[general] +version = 4 +name = Extra Fine +definition = ultimaker_s5 + +[metadata] +setting_version = 16 +type = quality +quality_type = high +weight = 1 +material = generic_petg +variant = AA 0.4 + +[values] +cool_min_speed = 12 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = =default_material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 10 +material_final_print_temperature = =material_print_temperature - 15 +retraction_combing_max_distance = 50 +speed_print = 50 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) +speed_topbottom = =math.ceil(speed_print * 30 / 50) +speed_wall = =math.ceil(speed_print * 30 / 50) + +infill_pattern = triangles +speed_infill = =math.ceil(speed_print * 40 / 50) +initial_layer_line_width_factor = 100 \ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..3182d37e83 --- /dev/null +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg @@ -0,0 +1,27 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s5 + +[metadata] +setting_version = 16 +type = quality +quality_type = normal +weight = 0 +material = generic_petg +variant = AA 0.4 + +[values] +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = =default_material_print_temperature - 5 +material_initial_print_temperature = =material_print_temperature - 10 +material_final_print_temperature = =material_print_temperature - 15 +retraction_combing_max_distance = 50 +speed_print = 55 +speed_layer_0 = =math.ceil(speed_print * 20 / 55) +speed_topbottom = =math.ceil(speed_print * 30 / 55) +speed_wall = =math.ceil(speed_print * 30 / 55) +infill_pattern = triangles +speed_infill = =math.ceil(speed_print * 45 / 55) +initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg new file mode 100644 index 0000000000..28a8999bdd --- /dev/null +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg @@ -0,0 +1,27 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s5 + +[metadata] +setting_version = 16 +type = quality +quality_type = draft +weight = -2 +material = generic_petg +variant = AA 0.8 + +[values] +brim_width = 7 +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature - 5 +material_standby_temperature = 100 +prime_tower_enable = True +retraction_combing_max_distance = 50 +speed_print = 40 +speed_topbottom = =math.ceil(speed_print * 25 / 40) +speed_wall = =math.ceil(speed_print * 30 / 40) +jerk_travel = 50 +cool_fan_speed = 20 +initial_layer_line_width_factor = 100 +infill_before_walls = true \ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg new file mode 100644 index 0000000000..342ac6713d --- /dev/null +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -0,0 +1,28 @@ +[general] +version = 4 +name = Sprint +definition = ultimaker_s5 + +[metadata] +setting_version = 16 +type = quality +quality_type = superdraft +weight = -4 +material = generic_petg +variant = AA 0.8 + +[values] +brim_width = 7 +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature - 5 +material_standby_temperature = 100 +prime_tower_enable = True +retraction_combing_max_distance = 50 +speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 30 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +jerk_travel = 50 +cool_fan_speed = 20 +initial_layer_line_width_factor = 100 +infill_before_walls = true diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg new file mode 100644 index 0000000000..1d102b7c89 --- /dev/null +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -0,0 +1,27 @@ +[general] +version = 4 +name = Extra Fast +definition = ultimaker_s5 + +[metadata] +setting_version = 16 +type = quality +quality_type = verydraft +weight = -3 +material = generic_petg +variant = AA 0.8 + +[values] +brim_width = 7 +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature - 5 +material_standby_temperature = 100 +prime_tower_enable = True +retraction_combing_max_distance = 50 +speed_print = 40 +speed_topbottom = =math.ceil(speed_print * 25 / 40) +speed_wall = =math.ceil(speed_print * 30 / 40) +jerk_travel = 50 +cool_fan_speed = 20 +initial_layer_line_width_factor = 100 +infill_before_walls = true