diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg index 2e99229d95..44cd4540d5 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -45,6 +45,5 @@ speed_wall = =math.ceil(speed_print * 50 / 50) speed_wall_0 = =math.ceil(speed_wall * 40 / 50) support_bottom_distance = =support_z_distance support_z_distance = =layer_height -travel_avoid_distance = 3 wall_0_inset = 0 wall_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg index 57f784a923..a0d09c97c2 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -45,5 +45,4 @@ speed_wall = =math.ceil(speed_print * 45 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) support_bottom_distance = =support_z_distance support_z_distance = =layer_height -travel_avoid_distance = 3 wall_0_inset = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg index 91daa94988..ebd7cd2d07 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg @@ -47,5 +47,4 @@ speed_wall = =math.ceil(speed_print * 35 / 40) speed_wall_0 = =math.ceil(speed_wall * 30 / 35) support_bottom_distance = =support_z_distance support_z_distance = =layer_height -travel_avoid_distance = 3 wall_0_inset = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg index c11ed30ed4..96cbc59a48 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -46,5 +46,4 @@ speed_wall = =math.ceil(speed_print * 35 / 40) speed_wall_0 = =math.ceil(speed_wall * 30 / 35) support_bottom_distance = =support_z_distance support_z_distance = =layer_height -travel_avoid_distance = 3 wall_0_inset = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg index a7d3f76ac6..da9abb519d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg @@ -59,7 +59,6 @@ support_interface_pattern = lines switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 -travel_avoid_distance = 3 wall_0_inset = 0 wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg index 7fdcb28d82..01db3adb1f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg @@ -58,7 +58,6 @@ support_interface_pattern = lines switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 -travel_avoid_distance = 3 wall_0_inset = 0 wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg index 72e9d918c9..d2dc42b015 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg @@ -59,7 +59,6 @@ support_interface_pattern = lines switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 -travel_avoid_distance = 3 wall_0_inset = 0 wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg index 6a271f548b..0580271647 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg @@ -56,7 +56,6 @@ support_interface_pattern = lines switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 -travel_avoid_distance = 3 wall_0_inset = 0 wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index 1982ba2c11..3f815fac3d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -44,7 +44,7 @@ retraction_count_max = 12 retraction_extra_prime_amount = 0.8 retraction_extrusion_window = 1 retraction_hop = 2 -retraction_hop_enabled = True +retraction_hop_enabled = False retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 @@ -56,11 +56,12 @@ speed_travel = 300 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 +skin_overlap = 5 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 -travel_avoid_distance = 3 +travel_avoid_distance = 0.5 wall_0_inset = 0 wall_line_width_x = =line_width wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg index 8e65408ea4..e45ec15dec 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg @@ -45,10 +45,11 @@ retraction_count_max = 12 retraction_extra_prime_amount = 0.8 retraction_extrusion_window = 1 retraction_hop = 2 -retraction_hop_enabled = True +retraction_hop_enabled = False retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 +skin_overlap = 5 speed_equalize_flow_enabled = True speed_layer_0 = 18 speed_print = 25 @@ -61,7 +62,7 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 -travel_avoid_distance = 3 +travel_avoid_distance = 0.5 wall_0_inset = 0 wall_line_width_x = =line_width wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg index 4ab5a3072f..707e535947 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -42,10 +42,11 @@ retraction_count_max = 12 retraction_extra_prime_amount = 0.8 retraction_extrusion_window = 1 retraction_hop = 2 -retraction_hop_enabled = True +retraction_hop_enabled = False retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 +skin_overlap = 5 speed_equalize_flow_enabled = True speed_layer_0 = 18 speed_print = 25 @@ -58,7 +59,7 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 -travel_avoid_distance = 3 +travel_avoid_distance = 0.5 wall_0_inset = 0 wall_line_width_x = =line_width wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index eefaeaaa58..41ac43a840 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -38,11 +38,11 @@ retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 +retraction_hop_enabled = False retraction_hop_only_when_collides = False retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_line_width = =round(line_width * 0.78 / 0.8, 2) -skin_overlap = 15 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 25 / 30) speed_travel = 300 @@ -56,6 +56,7 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 +travel_avoid_distance = 0.5 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index bd527242d8..66c0281b78 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -39,11 +39,11 @@ retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 +retraction_hop_enabled = False retraction_hop_only_when_collides = False retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_line_width = =round(line_width * 0.78 / 0.8, 2) -skin_overlap = 15 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_travel = 300 @@ -57,6 +57,7 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 +travel_avoid_distance = 0.5 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index 054309c705..1274f43eea 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -38,11 +38,11 @@ retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 +retraction_hop_enabled = False retraction_hop_only_when_collides = False retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_line_width = =round(line_width * 0.78 / 0.8, 2) -skin_overlap = 15 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 23 / 30) speed_travel = 300 @@ -56,6 +56,7 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 +travel_avoid_distance = 0.5 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg index e0486289a1..e94177abc3 100644 --- a/resources/variants/ultimaker3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_aa0.8.inst.cfg @@ -60,7 +60,6 @@ support_z_distance = =layer_height * 2 switch_extruder_prime_speed = 20 switch_extruder_retraction_amount = 16.5 top_bottom_thickness = 1.4 -travel_avoid_distance = 3 wall_0_inset = 0 wall_line_width_x = =wall_line_width wall_thickness = 2 diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg index 4ba2ca8422..aa2042b271 100644 --- a/resources/variants/ultimaker3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_bb0.8.inst.cfg @@ -81,7 +81,6 @@ support_z_distance = 0 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 12 top_bottom_thickness = 1 -travel_avoid_distance = 3 wall_0_inset = 0 wall_line_width_x = =wall_line_width wall_thickness = 1 diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg index 0fd110c76c..47b0359df7 100644 --- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg @@ -60,7 +60,6 @@ support_z_distance = =layer_height * 2 switch_extruder_prime_speed = 20 switch_extruder_retraction_amount = 16.5 top_bottom_thickness = 1.4 -travel_avoid_distance = 3 wall_0_inset = 0 wall_line_width_x = =wall_line_width wall_thickness = 2 diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg index 2e6292ed08..c982d207b0 100644 --- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg @@ -81,7 +81,6 @@ support_z_distance = 0 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 12 top_bottom_thickness = 1 -travel_avoid_distance = 3 wall_0_inset = 0 wall_line_width_x = =wall_line_width wall_thickness = 1