Import Lionbridge translations for Cura 4.8

These are the new translations we got from Lionbridge as imported by lionbridge_import.py.

Contributes to issue CURA-7782.

resources/i18n/de_DE/cura.po

@@ -46,7 +46,7 @@ msgstr "Nicht überschrieben"
 #, python-brace-format
 msgctxt "@label {0} is the name of a printer that's about to be deleted."
 msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr ""
+msgstr "Möchten Sie {0} wirklich entfernen? Der Vorgang kann nicht rückgängig gemacht werden."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
@@ -522,7 +522,7 @@ msgstr "Import des Profils aus Datei <filename>{0}</filename> fehlgeschlagen:"
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
-msgstr ""
+msgstr "Profil {0} erfolgreich importiert."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
@@ -549,7 +549,7 @@ msgstr "Für das Profil fehlt eine Qualitätsangabe."
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
 msgctxt "@info:status"
 msgid "Global stack is missing."
-msgstr ""
+msgstr "Globaler Stack fehlt."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
 msgctxt "@info:status"
@@ -560,13 +560,14 @@ msgstr "Das Profil kann nicht hinzugefügt werden."
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr ""
+msgstr "Der Qualitätstyp „{0}“ ist nicht mit der aktuell aktiven Maschinendefinition „{1}“ kompatibel."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr ""
+msgstr "Warnung: Das Profil wird nicht angezeigt, weil sein Qualitätstyp „{0}“ für die aktuelle Konfiguration nicht verfügbar ist. Wechseln Sie zu einer Material-/Düsenkombination,"
+" die mit diesem Qualitätstyp kompatibel ist."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
@@ -785,7 +786,7 @@ msgstr "Keine Erlaubnis zum Beschreiben dieses Arbeitsbereichs."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr ""
+msgstr "Das Betriebssystem erlaubt es nicht, eine Projektdatei an diesem Speicherort oder mit diesem Dateinamen zu speichern."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
 msgctxt "@error:zip"
@@ -1338,7 +1339,7 @@ msgstr "Über Cloud verbunden"
 #, python-brace-format
 msgctxt "@error:send"
 msgid "Unknown error code when uploading print job: {0}"
-msgstr ""
+msgstr "Unbekannter Fehlercode beim Upload des Druckauftrags: {0}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
@@ -1351,7 +1352,7 @@ msgstr[1] "Ihr Ultimaker-Konto hat neue Drucker erkannt."
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
-msgstr ""
+msgstr "Drucker {name} ({model}) aus Ihrem Konto wird hinzugefügt"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
@@ -1364,7 +1365,7 @@ msgstr[1] ""
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
-msgstr ""
+msgstr "Drucker aus Digital Factory hinzugefügt:"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
@@ -1384,13 +1385,13 @@ msgstr[1] "Diese Drucker sind nicht mit der Digital Factory verbunden:"
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
-msgstr ""
+msgstr "Ultimaker Digital Factory"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
-msgstr ""
+msgstr "Bitte besuchen Sie {website_link}, um eine Verbindung herzustellen"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
@@ -1406,19 +1407,19 @@ msgstr "Drucker entfernen"
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
-msgstr ""
+msgstr "{printer_name} wird bis zur nächsten Synchronisierung entfernt."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
-msgstr ""
+msgstr "Wenn Sie {printer_name} dauerhaft entfernen möchten, dann besuchen Sie bitte die {digital_factory_link}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
-msgstr ""
+msgstr "Möchten Sie {printer_name} wirklich vorübergehend entfernen?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
@@ -1442,7 +1443,7 @@ msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr ""
+msgstr "Es werden gleich alle Drucker aus Cura entfernt. Dieser Vorgang kann nicht rückgängig gemacht werden.Möchten Sie wirklich fortfahren."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
 msgctxt "@info:status"
@@ -1529,12 +1530,12 @@ msgstr "Druckauftrag wird vorbereitet."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
-msgstr ""
+msgstr "Die Druckauftragswarteschlange ist voll. Der Drucker kann keinen neuen Auftrag annehmen."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
-msgstr ""
+msgstr "Warteschlange voll"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
@@ -3713,12 +3714,12 @@ msgstr "Python-Fehlerverfolgungs-Bibliothek"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
-msgstr ""
+msgstr "Polygon-Packaging-Bibliothek, entwickelt von Prusa Research"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
-msgstr ""
+msgstr "Python-Bindungen für libnest2d"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
@@ -3771,7 +3772,8 @@ msgid ""
 "You have customized some profile settings.\n"
 "Would you like to Keep these changed settings after switching profiles?\n"
 "Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
+msgstr "Sie haben einige Profileinstellungen personalisiert.\nMöchten Sie diese geänderten Einstellungen nach einem Profilwechsel beibehalten?\nSie können die"
+" Änderungen auch verwerfen, um die Standardeinstellungen von '%1' zu laden."
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
 msgctxt "@title:column"
@@ -5206,7 +5208,7 @@ msgstr "Druckername"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
 msgctxt "@text"
 msgid "Please name your printer"
-msgstr ""
+msgstr "Bitte weisen Sie Ihrem Drucker einen Namen zu"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
@@ -5946,12 +5948,12 @@ msgstr "Upgrade von Version 4.6.2 auf 4.7"
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
 msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
+msgstr "Upgrade der Konfigurationen von Cura 4.7 auf Cura 4.8."
 
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
 msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
+msgstr "Upgrade von Version 4.7 auf 4.8"
 
 #: X3DReader/plugin.json
 msgctxt "description"

resources/i18n/de_DE/fdmprinter.def.json.po

@@ -2061,7 +2061,7 @@ msgstr "Temperatur Druckplatte"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature description"
 msgid "The temperature used for the heated build plate. If this is 0, the build plate is left unheated."
-msgstr ""
+msgstr "Die Temperatur, die für das beheizte Druckbett verwendet wird. Beträgt dieser Wert 0, wird das Bett nicht beheizt."
 
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 label"
@@ -2071,7 +2071,7 @@ msgstr "Temperatur der Druckplatte für die erste Schicht"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 description"
 msgid "The temperature used for the heated build plate at the first layer. If this is 0, the build plate is left unheated during the first layer."
-msgstr ""
+msgstr "Die Temperatur, auf die das Druckbett für die erste Schicht erhitzt wird. Beträgt dieser Wert 0, wird das Druckbett für die erste Schicht nicht beheizt."
 
 #: fdmprinter.def.json
 msgctxt "material_adhesion_tendency label"
@@ -2096,12 +2096,12 @@ msgstr "Oberflächenenergie."
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage label"
 msgid "Scaling Factor Shrinkage Compensation"
-msgstr ""
+msgstr "Kompensation der Schrumpfung des Skalierungsfaktors"
 
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage description"
 msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor."
-msgstr ""
+msgstr "Um die Schrumpfung des Materials beim Abkühlen zu kompensieren, wird das Modell mit diesem Faktor skaliert."
 
 #: fdmprinter.def.json
 msgctxt "material_crystallinity label"
@@ -5075,7 +5075,9 @@ msgstr "Rang der Netzverarbeitung"
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
 msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr ""
+msgstr "Legt fest, welche Priorität dieses Netz (Mesh) bei mehreren überlappenden Mesh-Füllungen hat. Bereiche, in denen mehrere Mesh-Füllungen überlappen, übernehmen"
+" die Einstellungen des Netzes mit dem niedrigsten Rang. Wird eine Mesh-Füllung höher gerankt, führt dies zu einer Modifizierung der Füllungen oder Mesh-Füllungen,"
+" deren Priorität niedriger oder normal ist."
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"

resources/i18n/es_ES/cura.po

@@ -45,7 +45,7 @@ msgstr "No reemplazado"
 #, python-brace-format
 msgctxt "@label {0} is the name of a printer that's about to be deleted."
 msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr ""
+msgstr "¿Seguro que desea eliminar {0}? Esta acción no se puede deshacer."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
@@ -521,7 +521,7 @@ msgstr "Error al importar el perfil de <filename>{0}</filename>:"
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
-msgstr ""
+msgstr "Perfil {0} importado correctamente."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
@@ -548,7 +548,7 @@ msgstr "Al perfil le falta un tipo de calidad."
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
 msgctxt "@info:status"
 msgid "Global stack is missing."
-msgstr ""
+msgstr "Falta la pila global."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
 msgctxt "@info:status"
@@ -559,13 +559,14 @@ msgstr "No se puede añadir el perfil."
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr ""
+msgstr "El tipo de calidad '{0}' no es compatible con la definición actual de máquina activa '{1}'."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr ""
+msgstr "Advertencia: el perfil no es visible porque su tipo de calidad '{0}' no está disponible para la configuración actual. Cambie a una combinación de material/tobera"
+" que pueda utilizar este tipo de calidad."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
@@ -784,7 +785,7 @@ msgstr "No tiene permiso para escribir el espacio de trabajo aquí."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr ""
+msgstr "El sistema operativo no permite guardar un archivo de proyecto en esta ubicación ni con este nombre de archivo."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
 msgctxt "@error:zip"
@@ -1337,7 +1338,7 @@ msgstr "Conectado mediante cloud"
 #, python-brace-format
 msgctxt "@error:send"
 msgid "Unknown error code when uploading print job: {0}"
-msgstr ""
+msgstr "Código de error desconocido al cargar el trabajo de impresión: {0}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
@@ -1350,7 +1351,7 @@ msgstr[1] "Se han detectado nuevas impresoras en su cuenta de Ultimaker"
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
-msgstr ""
+msgstr "Añadiendo la impresora {name} ({model}) de su cuenta"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
@@ -1363,7 +1364,7 @@ msgstr[1] ""
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
-msgstr ""
+msgstr "Impresoras añadidas desde Digital Factory:"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
@@ -1383,13 +1384,13 @@ msgstr[1] "Estas impresoras no están vinculadas a Digital Factory:"
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
-msgstr ""
+msgstr "Ultimaker Digital Factory"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
-msgstr ""
+msgstr "Para establecer una conexión, visite {website_link}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
@@ -1405,19 +1406,19 @@ msgstr "Eliminar impresoras"
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
-msgstr ""
+msgstr "{printer_name} se eliminará hasta la próxima sincronización de la cuenta."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
-msgstr ""
+msgstr "Para eliminar {printer_name} permanentemente, visite {digital_factory_link}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
-msgstr ""
+msgstr "¿Seguro que desea eliminar {printer_name} temporalmente?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
@@ -1441,7 +1442,7 @@ msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr ""
+msgstr "Está a punto de eliminar todas las impresoras de Cura. Esta acción no se puede deshacer.¿Seguro que desea continuar?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
 msgctxt "@info:status"
@@ -1528,12 +1529,12 @@ msgstr "Cargando el trabajo de impresión a la impresora."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
-msgstr ""
+msgstr "La cola de trabajos de impresión está llena. La impresora no puede aceptar trabajos nuevos."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
-msgstr ""
+msgstr "Cola llena"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
@@ -3713,12 +3714,12 @@ msgstr "Biblioteca de seguimiento de errores de Python"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
-msgstr ""
+msgstr "Biblioteca de empaquetado de polígonos, desarrollada por Prusa Research"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
-msgstr ""
+msgstr "Enlaces de Python para libnest2d"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
@@ -3771,7 +3772,8 @@ msgid ""
 "You have customized some profile settings.\n"
 "Would you like to Keep these changed settings after switching profiles?\n"
 "Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
+msgstr "Ha personalizado algunos ajustes del perfil.\n¿Le gustaría mantener estos ajustes cambiados después de cambiar de perfil?\nTambién puede descartar los"
+" cambios para cargar los valores predeterminados de'%1'."
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
 msgctxt "@title:column"
@@ -5206,7 +5208,7 @@ msgstr "Nombre de la impresora"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
 msgctxt "@text"
 msgid "Please name your printer"
-msgstr ""
+msgstr "Asigne un nombre a su impresora"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
@@ -5946,12 +5948,12 @@ msgstr "Actualización de la versión 4.6.2 a la 4.7"
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
 msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
+msgstr "Actualiza la configuración de Cura 4.7 a Cura 4.8."
 
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
 msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
+msgstr "Actualización de la versión 4.7 a la 4.8"
 
 #: X3DReader/plugin.json
 msgctxt "description"

resources/i18n/es_ES/fdmprinter.def.json.po

@@ -2061,7 +2061,7 @@ msgstr "Temperatura de la placa de impresión"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature description"
 msgid "The temperature used for the heated build plate. If this is 0, the build plate is left unheated."
-msgstr ""
+msgstr "La temperatura utilizada para la placa de impresión caliente. Si el valor es 0, la placa de impresión no se calentará."
 
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 label"
@@ -2071,7 +2071,7 @@ msgstr "Temperatura de la placa de impresión en la capa inicial"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 description"
 msgid "The temperature used for the heated build plate at the first layer. If this is 0, the build plate is left unheated during the first layer."
-msgstr ""
+msgstr "Temperatura de la placa de impresión una vez caliente en la primera capa. Si el valor es 0, la placa de impresión no se calentará en la primera capa."
 
 #: fdmprinter.def.json
 msgctxt "material_adhesion_tendency label"
@@ -2096,12 +2096,12 @@ msgstr "Energía de la superficie."
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage label"
 msgid "Scaling Factor Shrinkage Compensation"
-msgstr ""
+msgstr "Factor de escala para la compensación de la contracción"
 
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage description"
 msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor."
-msgstr ""
+msgstr "Para compensar la contracción del material a medida que se enfría, el modelo se escala con este factor."
 
 #: fdmprinter.def.json
 msgctxt "material_crystallinity label"
@@ -5075,7 +5075,9 @@ msgstr "Rango de procesamiento de la malla"
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
 msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr ""
+msgstr "Determina la prioridad de esta malla al tener en cuenta varias mallas de relleno superpuestas. Las áreas en las que se superponen varias mallas de relleno"
+" tomarán la configuración de la malla con el rango más bajo. Una malla de relleno con un orden superior modificará el relleno de las mallas de relleno"
+" con un orden inferior y las mallas normales."
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"

resources/i18n/fr_FR/cura.po

@@ -46,7 +46,7 @@ msgstr "Pas écrasé"
 #, python-brace-format
 msgctxt "@label {0} is the name of a printer that's about to be deleted."
 msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr ""
+msgstr "Voulez-vous vraiment supprimer l'objet {0} ? Cette action est irréversible !"
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
@@ -522,7 +522,7 @@ msgstr "Échec de l'importation du profil depuis le fichier <filename>{0}</filen
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
-msgstr ""
+msgstr "Importation du profil {0} réussie."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
@@ -549,7 +549,7 @@ msgstr "Il manque un type de qualité au profil."
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
 msgctxt "@info:status"
 msgid "Global stack is missing."
-msgstr ""
+msgstr "Il manque la pile globale."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
 msgctxt "@info:status"
@@ -560,13 +560,14 @@ msgstr "Impossible d'ajouter le profil."
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr ""
+msgstr "Le type de qualité « {0} » n'est pas compatible avec la définition actuelle de la machine active « {1} »."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr ""
+msgstr "Avertissement : le profil n'est pas visible car son type de qualité « {0} » n'est pas disponible pour la configuration actuelle. Passez à une combinaison"
+" matériau/buse qui peut utiliser ce type de qualité."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
@@ -785,7 +786,7 @@ msgstr "Aucune autorisation d'écrire l'espace de travail ici."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr ""
+msgstr "Le système d'exploitation ne permet pas d'enregistrer un fichier de projet à cet emplacement ou avec ce nom de fichier."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
 msgctxt "@error:zip"
@@ -1338,7 +1339,7 @@ msgstr "Connecté via le cloud"
 #, python-brace-format
 msgctxt "@error:send"
 msgid "Unknown error code when uploading print job: {0}"
-msgstr ""
+msgstr "Code d'erreur inconnu lors du téléchargement d'une tâche d'impression : {0}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
@@ -1351,7 +1352,7 @@ msgstr[1] "Nouvelles imprimantes détectées à partir de votre compte Ultimaker
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
-msgstr ""
+msgstr "Ajout de l'imprimante {name} ({model}) à partir de votre compte"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
@@ -1364,7 +1365,7 @@ msgstr[1] ""
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
-msgstr ""
+msgstr "Imprimantes ajoutées à partir de Digital Factory :"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
@@ -1384,13 +1385,13 @@ msgstr[1] "Ces imprimantes ne sont pas associées à Digital Factory :"
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
-msgstr ""
+msgstr "Ultimaker Digital Factory"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
-msgstr ""
+msgstr "Pour établir une connexion, veuillez visiter le site {website_link}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
@@ -1406,19 +1407,19 @@ msgstr "Supprimer des imprimantes"
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
-msgstr ""
+msgstr "L'imprimante {printer_name} sera supprimée jusqu'à la prochaine synchronisation de compte."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
-msgstr ""
+msgstr "Pour supprimer {printer_name} définitivement, visitez le site {digital_factory_link}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
-msgstr ""
+msgstr "Voulez-vous vraiment supprimer {printer_name} temporairement ?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
@@ -1442,7 +1443,7 @@ msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr ""
+msgstr "Vous êtes sur le point de supprimer toutes les imprimantes de Cura. Cette action est irréversible.\nVoulez-vous vraiment continuer ?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
 msgctxt "@info:status"
@@ -1529,12 +1530,12 @@ msgstr "Téléchargement de la tâche d'impression sur l'imprimante."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
-msgstr ""
+msgstr "La file d'attente pour les tâches d'impression est pleine. L'imprimante ne peut pas accepter une nouvelle tâche."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
-msgstr ""
+msgstr "La file d'attente est pleine"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
@@ -3713,12 +3714,12 @@ msgstr "Bibliothèque de suivi des erreurs Python"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
-msgstr ""
+msgstr "Bibliothèque d'emballage de polygones, développée par Prusa Research"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
-msgstr ""
+msgstr "Liens en python pour libnest2d"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
@@ -3771,7 +3772,8 @@ msgid ""
 "You have customized some profile settings.\n"
 "Would you like to Keep these changed settings after switching profiles?\n"
 "Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
+msgstr "Vous avez personnalisé certains paramètres de profil.\nSouhaitez-vous conserver ces paramètres modifiés après avoir changé de profil ?\nVous pouvez également"
+" annuler les modifications pour charger les valeurs par défaut de '%1'."
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
 msgctxt "@title:column"
@@ -5206,7 +5208,7 @@ msgstr "Nom de l'imprimante"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
 msgctxt "@text"
 msgid "Please name your printer"
-msgstr ""
+msgstr "Veuillez nommer votre imprimante"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
@@ -5946,12 +5948,12 @@ msgstr "Mise à niveau de 4.6.2 vers 4.7"
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
 msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
+msgstr "Mises à niveau des configurations de Cura 4.7 vers Cura 4.8."
 
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
 msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
+msgstr "Mise à niveau de 4.7 vers 4.8"
 
 #: X3DReader/plugin.json
 msgctxt "description"

resources/i18n/fr_FR/fdmprinter.def.json.po

@@ -2061,7 +2061,7 @@ msgstr "Température du plateau"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature description"
 msgid "The temperature used for the heated build plate. If this is 0, the build plate is left unheated."
-msgstr ""
+msgstr "Température utilisée pour le plateau de fabrication chauffé. Si elle est définie sur 0, le plateau de fabrication ne sera pas chauffé."
 
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 label"
@@ -2071,7 +2071,8 @@ msgstr "Température du plateau couche initiale"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 description"
 msgid "The temperature used for the heated build plate at the first layer. If this is 0, the build plate is left unheated during the first layer."
-msgstr ""
+msgstr "Température utilisée pour le plateau de fabrication chauffé à la première couche. Si elle est définie sur 0, le plateau de fabrication ne sera pas chauffé"
+" lors de la première couche."
 
 #: fdmprinter.def.json
 msgctxt "material_adhesion_tendency label"
@@ -2096,12 +2097,12 @@ msgstr "Énergie de la surface."
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage label"
 msgid "Scaling Factor Shrinkage Compensation"
-msgstr ""
+msgstr "Mise à l'échelle du facteur de compensation de contraction"
 
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage description"
 msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor."
-msgstr ""
+msgstr "Pour compenser la contraction du matériau lors de son refroidissement, le modèle est mis à l'échelle avec ce facteur."
 
 #: fdmprinter.def.json
 msgctxt "material_crystallinity label"
@@ -5075,7 +5076,9 @@ msgstr "Rang de traitement du maillage"
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
 msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr ""
+msgstr "Détermine la priorité de cette maille lorsque plusieurs chevauchements de mailles de remplissage sont pris en considération. Les zones comportant plusieurs"
+" chevauchements de mailles de remplissage prendront en compte les paramètres du maillage ayant l'ordre le plus bas. Une maille de remplissage possédant"
+" un ordre plus élevé modifiera le remplissage des mailles de remplissage ayant un ordre plus bas et des mailles normales."
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"

resources/i18n/it_IT/cura.po

@@ -46,7 +46,7 @@ msgstr "Non sottoposto a override"
 #, python-brace-format
 msgctxt "@label {0} is the name of a printer that's about to be deleted."
 msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr ""
+msgstr "Rimuovere {0}? Questa operazione non può essere annullata!"
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
@@ -522,7 +522,7 @@ msgstr "Impossibile importare il profilo da <filename>{0}</filename>:"
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
-msgstr ""
+msgstr "Profilo {0} importato correttamente."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
@@ -549,7 +549,7 @@ msgstr "Il profilo è privo del tipo di qualità."
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
 msgctxt "@info:status"
 msgid "Global stack is missing."
-msgstr ""
+msgstr "Pila globale mancante."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
 msgctxt "@info:status"
@@ -560,13 +560,14 @@ msgstr "Impossibile aggiungere il profilo."
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr ""
+msgstr "Il tipo di qualità '{0}' non è compatibile con la definizione di macchina attiva corrente '{1}'."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr ""
+msgstr "Avvertenza: il profilo non è visibile in quanto il tipo di qualità '{0}' non è disponibile per la configurazione corrente. Passare alla combinazione materiale/ugello"
+" che consente di utilizzare questo tipo di qualità."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
@@ -785,7 +786,7 @@ msgstr "Nessuna autorizzazione di scrittura dell'area di lavoro qui."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr ""
+msgstr "Il sistema operativo non consente di salvare un file di progetto in questa posizione o con questo nome file."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
 msgctxt "@error:zip"
@@ -1338,7 +1339,7 @@ msgstr "Collegato tramite cloud"
 #, python-brace-format
 msgctxt "@error:send"
 msgid "Unknown error code when uploading print job: {0}"
-msgstr ""
+msgstr "Codice di errore sconosciuto durante il caricamento del processo di stampa: {0}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
@@ -1351,7 +1352,7 @@ msgstr[1] "Nuove stampanti rilevate dall'account Ultimaker"
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
-msgstr ""
+msgstr "Aggiunta della stampante {name} ({model}) dall'account"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
@@ -1364,7 +1365,7 @@ msgstr[1] ""
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
-msgstr ""
+msgstr "Stampanti aggiunte da Digital Factory:"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
@@ -1384,13 +1385,13 @@ msgstr[1] "Queste stampanti non sono collegate a Digital Factory:"
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
-msgstr ""
+msgstr "Ultimaker Digital Factory"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
-msgstr ""
+msgstr "Per stabilire una connessione, visitare {website_link}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
@@ -1406,19 +1407,19 @@ msgstr "Rimuovere le stampanti"
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
-msgstr ""
+msgstr "{printer_name} sarà rimossa fino alla prossima sincronizzazione account."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
-msgstr ""
+msgstr "Per rimuovere definitivamente {printer_name}, visitare {digital_factory_link}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
-msgstr ""
+msgstr "Rimuovere temporaneamente {printer_name}?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
@@ -1442,7 +1443,7 @@ msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr ""
+msgstr "Si stanno per rimuovere tutte le stampanti da Cura. Questa azione non può essere annullata. \nContinuare?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
 msgctxt "@info:status"
@@ -1529,12 +1530,12 @@ msgstr "Caricamento del processo di stampa sulla stampante."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
-msgstr ""
+msgstr "La coda dei processi di stampa è piena. La stampante non può accettare un nuovo processo."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
-msgstr ""
+msgstr "Coda piena"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
@@ -3714,12 +3715,12 @@ msgstr "Libreria per la traccia degli errori Python"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
-msgstr ""
+msgstr "Libreria di impacchettamento dei poligoni sviluppata da Prusa Research"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
-msgstr ""
+msgstr "Vincoli Python per libnest2d"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
@@ -3772,7 +3773,8 @@ msgid ""
 "You have customized some profile settings.\n"
 "Would you like to Keep these changed settings after switching profiles?\n"
 "Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
+msgstr "Alcune impostazioni di profilo sono state personalizzate.\nMantenere queste impostazioni modificate dopo il cambio dei profili?\nIn alternativa, è possibile"
+" eliminare le modifiche per caricare i valori predefiniti da '%1'."
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
 msgctxt "@title:column"
@@ -5207,7 +5209,7 @@ msgstr "Nome stampante"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
 msgctxt "@text"
 msgid "Please name your printer"
-msgstr ""
+msgstr "Dare un nome alla stampante"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
@@ -5947,12 +5949,12 @@ msgstr "Aggiornamento versione da 4.6.2 a 4.7"
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
 msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
+msgstr "Aggiorna le configurazioni da Cura 4.7 a Cura 4.8."
 
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
 msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
+msgstr "Aggiornamento della versione da 4.7 a 4.8"
 
 #: X3DReader/plugin.json
 msgctxt "description"

resources/i18n/it_IT/fdmprinter.def.json.po

@@ -2061,7 +2061,7 @@ msgstr "Temperatura piano di stampa"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature description"
 msgid "The temperature used for the heated build plate. If this is 0, the build plate is left unheated."
-msgstr ""
+msgstr "Indica la temperatura utilizzata per il piano di stampa riscaldato. Se questo valore è 0, il piano di stampa viene lasciato non riscaldato."
 
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 label"
@@ -2071,7 +2071,8 @@ msgstr "Temperatura piano di stampa Strato iniziale"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 description"
 msgid "The temperature used for the heated build plate at the first layer. If this is 0, the build plate is left unheated during the first layer."
-msgstr ""
+msgstr "Indica la temperatura usata per il piano di stampa riscaldato per il primo strato. Se questo valore è 0, il piano di stampa viene lasciato non riscaldato"
+" per il primo strato."
 
 #: fdmprinter.def.json
 msgctxt "material_adhesion_tendency label"
@@ -2096,12 +2097,12 @@ msgstr "Energia superficiale."
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage label"
 msgid "Scaling Factor Shrinkage Compensation"
-msgstr ""
+msgstr "Fattore di scala per la compensazione della contrazione"
 
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage description"
 msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor."
-msgstr ""
+msgstr "Per compensare la contrazione del materiale durante il raffreddamento, il modello sarà scalato con questo fattore."
 
 #: fdmprinter.def.json
 msgctxt "material_crystallinity label"
@@ -5075,7 +5076,9 @@ msgstr "Classificazione dell'elaborazione delle maglie"
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
 msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr ""
+msgstr "Determina la priorità di questa mesh quando si considera la sovrapposizione multipla delle mesh di riempimento. Per le aree con la sovrapposizione di più"
+" mesh di riempimento verranno utilizzate le impostazioni della mesh con la classificazione più bassa. Una mesh di riempimento con un ordine più alto modificherà"
+" il riempimento delle mesh di riempimento con un ordine inferiore e delle mesh normali."
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"

resources/i18n/ja_JP/cura.po

@@ -46,7 +46,7 @@ msgstr "上書きできません"
 #, python-brace-format
 msgctxt "@label {0} is the name of a printer that's about to be deleted."
 msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr ""
+msgstr "{0}を取り除いてもよろしいですか？この操作は元に戻せません。"
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
@@ -522,7 +522,7 @@ msgstr "<filename>{0}</filename>からプロファイルの取り込みに失敗
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
-msgstr ""
+msgstr "プロファイル{0}の取り込みが完了しました。"
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
@@ -549,7 +549,7 @@ msgstr "プロファイルはクオリティータイプが不足しています
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
 msgctxt "@info:status"
 msgid "Global stack is missing."
-msgstr ""
+msgstr "グローバルスタックがありません。"
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
 msgctxt "@info:status"
@@ -560,13 +560,13 @@ msgstr "プロファイルを追加できません。"
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr ""
+msgstr "クオリティータイプ「{0}」は、現在アクティブなプリンター定義「{1}」と互換性がありません。"
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr ""
+msgstr "警告：現在の構成ではクオリティータイプ「{0}」を使用できないため、プロファイルは表示されません。このクオリティータイプを使用できる材料/ノズルの組み合わせに切り替えてください。"
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
@@ -785,7 +785,7 @@ msgstr "この作業スペースに書き込む権限がありません。"
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr ""
+msgstr "使用しているオペレーティングシステムでは、この場所またはこのファイル名でプロジェクトファイルを保存することはできません。"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
 msgctxt "@error:zip"
@@ -1338,7 +1338,7 @@ msgstr "クラウド経由で接続"
 #, python-brace-format
 msgctxt "@error:send"
 msgid "Unknown error code when uploading print job: {0}"
-msgstr ""
+msgstr "プリントジョブのアップロード時の不明なエラーコード：{0}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
@@ -1350,7 +1350,7 @@ msgstr[0] "Ultimakerアカウントから新しいプリンターが検出され
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
-msgstr ""
+msgstr "アカウントからプリンター{name}（{model}）を追加しています"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
@@ -1362,7 +1362,7 @@ msgstr[0] ""
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
-msgstr ""
+msgstr "Digital Factoryからプリンターが追加されました："
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
@@ -1380,13 +1380,13 @@ msgstr[0] "これらのプリンターはDigital Factoryとリンクされてい
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
-msgstr ""
+msgstr "Ultimaker Digital Factory"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
-msgstr ""
+msgstr "接続を確立するには、{website_link}にアクセスしてください"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
@@ -1402,19 +1402,19 @@ msgstr "プリンターを取り除く"
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
-msgstr ""
+msgstr "次回のアカウントの同期までに{printer_name}は削除されます。"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
-msgstr ""
+msgstr "{printer_name}を完全に削除するには、{digital_factory_link}にアクセスしてください"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
-msgstr ""
+msgstr "{printer_name}を一時的に削除してもよろしいですか？"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
@@ -1437,7 +1437,7 @@ msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr ""
+msgstr "Curaからすべてのプリンターを削除しようとしています。この操作は元に戻せません。\n続行してもよろしいですか？"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
 msgctxt "@info:status"
@@ -1524,12 +1524,12 @@ msgstr "プリントジョブをプリンターにアップロードしていま
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
-msgstr ""
+msgstr "プリントジョブのキューがいっぱいです。プリンターは新しいジョブを処理できません。"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
-msgstr ""
+msgstr "キューがいっぱい"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
@@ -3706,12 +3706,12 @@ msgstr "Pythonエラー追跡ライブラリー"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
-msgstr ""
+msgstr "Prusa Research開発のポリゴンパッキングライブラリー"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
-msgstr ""
+msgstr "libnest2dのPythonバインディング"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
@@ -3764,7 +3764,7 @@ msgid ""
 "You have customized some profile settings.\n"
 "Would you like to Keep these changed settings after switching profiles?\n"
 "Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
+msgstr "一部のプロファイル設定がカスタマイズされています。\nこれらの変更された設定をプロファイルの切り替え後も維持しますか？\n変更を破棄して'%1'からデフォルトの設定を読み込むこともできます。"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
 msgctxt "@title:column"
@@ -5193,7 +5193,7 @@ msgstr "プリンター名"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
 msgctxt "@text"
 msgid "Please name your printer"
-msgstr ""
+msgstr "プリンターに名前を付けてください"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
@@ -5933,12 +5933,12 @@ msgstr "4.6.2から4.7へのバージョン更新"
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
 msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
+msgstr "Cura 4.7からCura 4.8に設定をアップグレードします。"
 
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
 msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
+msgstr "バージョン4.7から4.8へのアップグレード"
 
 #: X3DReader/plugin.json
 msgctxt "description"

resources/i18n/ja_JP/fdmprinter.def.json.po

@@ -2141,7 +2141,7 @@ msgstr "ビルドプレート温度"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature description"
 msgid "The temperature used for the heated build plate. If this is 0, the build plate is left unheated."
-msgstr ""
+msgstr "加熱式ビルドプレートの温度。これが0の場合、ビルドプレートは加熱されないままになります。"
 
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 label"
@@ -2151,7 +2151,7 @@ msgstr "初期レイヤーのビルドプレート温度"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 description"
 msgid "The temperature used for the heated build plate at the first layer. If this is 0, the build plate is left unheated during the first layer."
-msgstr ""
+msgstr "最初のレイヤー印刷時の加熱式ビルドプレートの温度。これが0の場合、最初のレイヤー印刷時のビルドプレートは加熱されないままになります。"
 
 #: fdmprinter.def.json
 msgctxt "material_adhesion_tendency label"
@@ -2176,12 +2176,12 @@ msgstr "表面エネルギー。"
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage label"
 msgid "Scaling Factor Shrinkage Compensation"
-msgstr ""
+msgstr "スケールファクタ収縮補正"
 
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage description"
 msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor."
-msgstr ""
+msgstr "材料の冷却時の収縮を補正するために、モデルはこのスケールファクタでスケールされます。"
 
 #: fdmprinter.def.json
 msgctxt "material_crystallinity label"
@@ -5196,7 +5196,7 @@ msgstr "メッシュ処理ランク"
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
 msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr ""
+msgstr "インフィルメッシュの重なりが複数生じた場合のこのメッシュの優先度を決定します。複数のインフィルメッシュの重なりがあるエリアでは、最もランクが低いメッシュの設定になります。順序が高いインフィルメッシュは、順序が低いインフィルメッシュのインフィルと通常のメッシュを変更します。"
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"

resources/i18n/ko_KR/cura.po

@@ -46,7 +46,7 @@ msgstr "재정의되지 않음"
 #, python-brace-format
 msgctxt "@label {0} is the name of a printer that's about to be deleted."
 msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr ""
+msgstr "정말로 {}을(를) 제거하시겠습니까? 이 작업을 실행 취소할 수 없습니다."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
@@ -522,7 +522,7 @@ msgstr "<filename>{0}</filename>에서 프로파일을 가져오지 못했습니
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
-msgstr ""
+msgstr "프로파일 {0}을(를) 성공적으로 가져왔습니다."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
@@ -549,7 +549,7 @@ msgstr "프로파일에 품질 타입이 누락되었습니다."
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
 msgctxt "@info:status"
 msgid "Global stack is missing."
-msgstr ""
+msgstr "전체 스택이 누락되었습니다."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
 msgctxt "@info:status"
@@ -560,13 +560,13 @@ msgstr "프로파일을 추가할 수 없습니다."
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr ""
+msgstr "'{0}' 품질 타입은 현재 활성 기기 정의 '{1}'와(과) 호환되지 않습니다."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr ""
+msgstr "경고: 프로파일은 '{0}' 품질 타입을 현재 구성에 이용할 수 없기 때문에 찾을 수 없습니다. 이 품질 타입을 사용할 수 있는 재료/노즐 조합으로 전환하십시오."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
@@ -785,7 +785,7 @@ msgstr "여기서 작업 환경을 작성할 권한이 없습니다."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr ""
+msgstr "운영 체제가 프로젝트 파일을 이 위치로 또는 이 파일명으로 저장하지 못합니다."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
 msgctxt "@error:zip"
@@ -1338,7 +1338,7 @@ msgstr "Cloud를 통해 연결됨"
 #, python-brace-format
 msgctxt "@error:send"
 msgid "Unknown error code when uploading print job: {0}"
-msgstr ""
+msgstr "프린트 작업 업로드 시 알 수 없는 오류 코드: {0}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
@@ -1350,7 +1350,7 @@ msgstr[0] "Ultimaker 계정에서 새 프린터가 감지되었습니다"
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
-msgstr ""
+msgstr "사용자 계정에서 프린터 {}({model}) 추가"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
@@ -1362,7 +1362,7 @@ msgstr[0] ""
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
-msgstr ""
+msgstr "Digital Factory에서 프린터 추가:"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
@@ -1380,13 +1380,13 @@ msgstr[0] "다음 프린터는 Digital Factory에 연결되어 있지 않습니
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
-msgstr ""
+msgstr "Ultimaker Digital Factory"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
-msgstr ""
+msgstr "연결을 설정하려면 {website_link}에 방문하십시오."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
@@ -1402,19 +1402,19 @@ msgstr "프린터 제거"
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
-msgstr ""
+msgstr "다음 계정 동기화 시까지 {printer_name}이(가) 제거됩니다."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
-msgstr ""
+msgstr "{printer_name}을(를) 영구적으로 제거하려면 {digital_factory_link}을(를) 방문하십시오."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
-msgstr ""
+msgstr "일시적으로 {printer_name}을(를) 제거하시겠습니까?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
@@ -1437,7 +1437,7 @@ msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr ""
+msgstr "Cura에서 모든 프린터를 제거하려고 합니다. 이 작업은 실행 취소할 수 없습니다. \n정말로 계속하시겠습니까?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
 msgctxt "@info:status"
@@ -1524,12 +1524,12 @@ msgstr "프린트 작업을 프린터로 업로드하고 있습니다."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
-msgstr ""
+msgstr "프린트 작업 대기열이 가득 찼습니다. 프린터가 새 작업을 수락할 수 없습니다."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
-msgstr ""
+msgstr "대기열 가득 참"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
@@ -3700,12 +3700,12 @@ msgstr "Python 오류 추적 라이브러리"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
-msgstr ""
+msgstr "폴리곤 패킹 라이브러리, Prusa Research 개발"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
-msgstr ""
+msgstr "libnest2d용 Python 바인딩"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
@@ -3758,7 +3758,7 @@ msgid ""
 "You have customized some profile settings.\n"
 "Would you like to Keep these changed settings after switching profiles?\n"
 "Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
+msgstr "일부 프로파일 설정을 사용자 정의했습니다.\n프로파일 전환 후에도 변경된 설정을 유지하시겠습니까?\n또는 변경 사항을 버리고 '%1'에서 기본값을 로드할 수 있습니다."
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
 msgctxt "@title:column"
@@ -5188,7 +5188,7 @@ msgstr "프린터 이름"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
 msgctxt "@text"
 msgid "Please name your printer"
-msgstr ""
+msgstr "프린터의 이름을 설정하십시오"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
@@ -5926,12 +5926,12 @@ msgstr "4.6.2에서 4.7로 버전 업그레이드"
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
 msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
+msgstr "Cura 4.7에서 Cura 4.8로 구성을 업그레이드합니다."
 
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
 msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
+msgstr "4.7에서 4.8로 버전 업그레이드"
 
 #: X3DReader/plugin.json
 msgctxt "description"

resources/i18n/ko_KR/fdmprinter.def.json.po

@@ -2062,7 +2062,7 @@ msgstr "빌드 플레이트 온도"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature description"
 msgid "The temperature used for the heated build plate. If this is 0, the build plate is left unheated."
-msgstr ""
+msgstr "내열 빌드 플레이트용으로 사용된 온도 0인 경우 빌드 플레이트가 가열되지 않습니다."
 
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 label"
@@ -2072,7 +2072,7 @@ msgstr "초기 레이어의 빌드 플레이트 온도"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 description"
 msgid "The temperature used for the heated build plate at the first layer. If this is 0, the build plate is left unheated during the first layer."
-msgstr ""
+msgstr "첫 번째 레이어에서 내열 빌드 플레이트에 사용되는 온도. 0인 경우, 빌드 플레이트가 첫 번째 레이어에서 가열되지 않습니다."
 
 #: fdmprinter.def.json
 msgctxt "material_adhesion_tendency label"
@@ -2097,12 +2097,12 @@ msgstr "표면의 에너지입니다."
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage label"
 msgid "Scaling Factor Shrinkage Compensation"
-msgstr ""
+msgstr "확장 배율 수축 보상"
 
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage description"
 msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor."
-msgstr ""
+msgstr "냉각됨에 따라 재료 수축을 보상하기 위해 모델이 이 배율로 확장됩니다."
 
 #: fdmprinter.def.json
 msgctxt "material_crystallinity label"
@@ -5076,7 +5076,7 @@ msgstr "메쉬 처리 랭크"
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
 msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr ""
+msgstr "여러 오버랩 메쉬 내부채움을 고려할 때 메쉬의 우선 순위를 결정합니다. 여러 메쉬 내부채움이 오버랩하는 영역은 최저 랭크의 메쉬 설정에 착수하게 됩니다. 우선 순위가 높은 내부채움 메쉬는 우선 순위가 낮은 내부채움 메쉬와 표준 메쉬의 내부채움을 수정합니다."
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"

resources/i18n/nl_NL/cura.po

@@ -46,7 +46,7 @@ msgstr "Niet overschreven"
 #, python-brace-format
 msgctxt "@label {0} is the name of a printer that's about to be deleted."
 msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr ""
+msgstr "Weet u zeker dat u {0} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
@@ -522,7 +522,7 @@ msgstr "Kan het profiel niet importeren uit <filename>{0}</filename>:"
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
-msgstr ""
+msgstr "Het profiel {0} is geïmporteerd."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
@@ -549,7 +549,7 @@ msgstr "Er ontbreekt een kwaliteitstype in het profiel."
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
 msgctxt "@info:status"
 msgid "Global stack is missing."
-msgstr ""
+msgstr "Algemene stapel ontbreekt."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
 msgctxt "@info:status"
@@ -560,13 +560,14 @@ msgstr "Kan het profiel niet toevoegen."
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr ""
+msgstr "Kwaliteitstype '{0}' is niet compatibel met de huidige actieve machinedefinitie '{1}'."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr ""
+msgstr "Waarschuwing: het profiel is niet zichtbaar omdat het kwaliteitstype '{0}' van het profiel niet beschikbaar is voor de huidige configuratie. Schakel naar"
+" een materiaal-nozzle-combinatie waarvoor dit kwaliteitstype geschikt is."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
@@ -785,7 +786,7 @@ msgstr "Geen bevoegdheid om de werkruimte hier te schrijven."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr ""
+msgstr "Het besturingssysteem staat niet toe dat u een projectbestand opslaat op deze locatie of met deze bestandsnaam."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
 msgctxt "@error:zip"
@@ -1338,7 +1339,7 @@ msgstr "Verbonden via Cloud"
 #, python-brace-format
 msgctxt "@error:send"
 msgid "Unknown error code when uploading print job: {0}"
-msgstr ""
+msgstr "Onbekende foutcode bij uploaden printtaak: {0}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
@@ -1351,7 +1352,7 @@ msgstr[1] "Nieuwe printers gedetecteerd van uw Ultimaker-account"
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
-msgstr ""
+msgstr "Printer {name} ({model}) toevoegen vanaf uw account"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
@@ -1364,7 +1365,7 @@ msgstr[1] ""
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
-msgstr ""
+msgstr "Printers toegevoegd vanuit Digital Factory:"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
@@ -1384,13 +1385,13 @@ msgstr[1] "Deze printers zijn niet gekoppeld aan de Digital Factory:"
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
-msgstr ""
+msgstr "Ultimaker Digital Factory"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
-msgstr ""
+msgstr "Ga naar {website_link} om een verbinding tot stand te brengen"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
@@ -1406,19 +1407,19 @@ msgstr "Printers verwijderen"
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
-msgstr ""
+msgstr "{printer_name} wordt verwijderd tot de volgende accountsynchronisatie."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
-msgstr ""
+msgstr "Bezoek {digital_factory_link} om {printer_name} permanent te verwijderen"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
-msgstr ""
+msgstr "Weet u zeker dat u {printer_name} tijdelijk wilt verwijderen?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
@@ -1442,7 +1443,7 @@ msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr ""
+msgstr "U staat op het punt om alle printers uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\nWeet u zeker dat u door wilt gaan?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
 msgctxt "@info:status"
@@ -1529,12 +1530,12 @@ msgstr "Printtaak naar printer aan het uploaden."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
-msgstr ""
+msgstr "Wachtrij voor afdruktaken is vol. De printer kan geen nieuwe taken accepteren."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
-msgstr ""
+msgstr "Wachtrij vol"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
@@ -3714,12 +3715,12 @@ msgstr "Python fouttraceringsbibliotheek"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
-msgstr ""
+msgstr "Verpakkingsbibliotheek met veelhoeken, ontwikkeld door Prusa Research"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
-msgstr ""
+msgstr "Pythonbindingen voor libnest2d"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
@@ -3772,7 +3773,8 @@ msgid ""
 "You have customized some profile settings.\n"
 "Would you like to Keep these changed settings after switching profiles?\n"
 "Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
+msgstr "U hebt enkele profielinstellingen aangepast.\nWilt u deze gewijzigde instellingen behouden na het verwisselen van profielen?\nU kunt de wijzigingen ook"
+" verwijderen om de standaardinstellingen van '%1' te laden."
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
 msgctxt "@title:column"
@@ -5207,7 +5209,7 @@ msgstr "Printernaam"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
 msgctxt "@text"
 msgid "Please name your printer"
-msgstr ""
+msgstr "Geef uw printer een naam"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
@@ -5947,12 +5949,12 @@ msgstr "Versie-upgrade van 4.6.2 naar 4.7"
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
 msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.7 naar Cura 4.8."
 
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
 msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
+msgstr "Versie-upgrade van 4.7 naar 4.8"
 
 #: X3DReader/plugin.json
 msgctxt "description"

resources/i18n/nl_NL/fdmprinter.def.json.po

@@ -2061,7 +2061,7 @@ msgstr "Platformtemperatuur"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature description"
 msgid "The temperature used for the heated build plate. If this is 0, the build plate is left unheated."
-msgstr ""
+msgstr "De temperatuur van het verwarmde platform. Als de temperatuur is ingesteld op 0, wordt het platform niet verwarmd."
 
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 label"
@@ -2071,7 +2071,7 @@ msgstr "Platformtemperatuur voor de eerste laag"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 description"
 msgid "The temperature used for the heated build plate at the first layer. If this is 0, the build plate is left unheated during the first layer."
-msgstr ""
+msgstr "De temperatuur van het verwarmde platform voor de eerste laag. Als de temperatuur 0 is, wordt het platform bij de eerste laag niet verwarmd."
 
 #: fdmprinter.def.json
 msgctxt "material_adhesion_tendency label"
@@ -2096,12 +2096,12 @@ msgstr "Oppervlakte-energie."
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage label"
 msgid "Scaling Factor Shrinkage Compensation"
-msgstr ""
+msgstr "Schaalfactor krimpcompensatie"
 
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage description"
 msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor."
-msgstr ""
+msgstr "Het model wordt met deze factor geschaald ter compensatie van het krimpen van het materiaal tijdens het afkoelen."
 
 #: fdmprinter.def.json
 msgctxt "material_crystallinity label"
@@ -5075,7 +5075,8 @@ msgstr "Rasterverwerkingsrang"
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
 msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr ""
+msgstr "Bepaalt de prioriteit van dit raster bij meerdere overlappende vulrasters. Gebieden met meerdere overlappende vulrasters krijgen de instellingen van het"
+" vulraster met de laagste rang. Met een vulraster dat voorrang heeft, wordt de vulling van andere vulrasters en normale rasters aangepast."
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"

resources/i18n/pt_PT/cura.po

@@ -46,7 +46,7 @@ msgstr "Manter"
 #, python-brace-format
 msgctxt "@label {0} is the name of a printer that's about to be deleted."
 msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr ""
+msgstr "Tem a certeza de que pretende remover {0}? Esta ação não pode ser anulada!"
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
@@ -532,7 +532,7 @@ msgstr "Falha ao importar perfil de <filename>{0}</filename>:"
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
-msgstr ""
+msgstr "Perfil {0} importado com êxito."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
@@ -559,7 +559,7 @@ msgstr "O perfil não inclui qualquer tipo de qualidade."
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
 msgctxt "@info:status"
 msgid "Global stack is missing."
-msgstr ""
+msgstr "A pilha global está em falta."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
 msgctxt "@info:status"
@@ -570,13 +570,14 @@ msgstr "Não é possível adicionar o perfil."
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr ""
+msgstr "O tipo de qualidade '{0}' não é compatível com a definição de máquina atualmente ativa '{1}'."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr ""
+msgstr "Aviso: o perfil não é visível porque o respetivo tipo de qualidade '{0}' não está disponível para a configuração atual. Mude para uma combinação de material/bocal"
+" que possa utilizar este tipo de qualidade."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
@@ -796,7 +797,7 @@ msgstr "Não tem permissão para escrever o espaço de trabalho aqui."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr ""
+msgstr "O sistema operativo não permite guardar um ficheiro de projeto nesta localização ou com este nome de ficheiro."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
 msgctxt "@error:zip"
@@ -1351,7 +1352,7 @@ msgstr "Ligada através da cloud"
 #, python-brace-format
 msgctxt "@error:send"
 msgid "Unknown error code when uploading print job: {0}"
-msgstr ""
+msgstr "Código de erro desconhecido ao carregar trabalho de impressão: {0}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
@@ -1364,7 +1365,7 @@ msgstr[1] "Novas impressoras detetadas a partir da sua conta Ultimaker"
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
-msgstr ""
+msgstr "Adicionar impressora {name} ({model}) a partir da sua conta"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
@@ -1377,7 +1378,7 @@ msgstr[1] ""
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
-msgstr ""
+msgstr "Impressoras adicionadas a partir da Digital Factory:"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
@@ -1397,13 +1398,13 @@ msgstr[1] "Estas impressoras não estão associadas à Digital Factory:"
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
-msgstr ""
+msgstr "Ultimaker Digital Factory"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
-msgstr ""
+msgstr "Para estabelecer uma ligação, visite {website_link}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
@@ -1419,19 +1420,19 @@ msgstr "Remover impressoras"
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
-msgstr ""
+msgstr "A impressora {printer_name} vai ser removida até à próxima sincronização de conta."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
-msgstr ""
+msgstr "Para remover a impressora {printer_name} de forma permanente, visite {digital_factory_link}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
-msgstr ""
+msgstr "Tem a certeza de que pretende remover a impressora {printer_name} temporariamente?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
@@ -1455,7 +1456,7 @@ msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr ""
+msgstr "Está prestes a remover todas as impressoras do Cura. Esta ação não pode ser anulada.Tem a certeza de que pretende continuar?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
 msgctxt "@info:status"
@@ -1542,12 +1543,12 @@ msgstr "Carregar um trabalho de impressão na impressora."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
-msgstr ""
+msgstr "A fila de trabalhos de impressão está cheia. A impressora não consegue aceitar um novo trabalho."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
-msgstr ""
+msgstr "Fila cheia"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
@@ -3740,12 +3741,12 @@ msgstr "Biblioteca de controlo de erros de Python"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
-msgstr ""
+msgstr "Biblioteca de embalagens de polígonos, desenvolvida pela Prusa Research"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
-msgstr ""
+msgstr "Ligações Python para libnest2d"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
@@ -3799,7 +3800,8 @@ msgid ""
 "You have customized some profile settings.\n"
 "Would you like to Keep these changed settings after switching profiles?\n"
 "Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
+msgstr "Personalizou algumas definições de perfil.\nPretende manter estas definições alteradas depois de trocar de perfis?\nComo alternativa, pode descartar as"
+" alterações para carregar as predefinições a partir de '%1'."
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
 msgctxt "@title:column"
@@ -5256,7 +5258,7 @@ msgstr "Nome da impressora"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
 msgctxt "@text"
 msgid "Please name your printer"
-msgstr ""
+msgstr "Atribuir um nome à impressora"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
@@ -5999,12 +6001,12 @@ msgstr "Atualização da versão 4.6.2 para a versão 4.7"
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
 msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
+msgstr "Atualiza as configurações do Cura 4.7 para o Cura 4.8."
 
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
 msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
+msgstr "Atualização da versão 4.7 para 4.8"
 
 #: X3DReader/plugin.json
 msgctxt "description"

resources/i18n/pt_PT/fdmprinter.def.json.po

@@ -2124,7 +2124,7 @@ msgstr "Temperatura Base de Construção"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature description"
 msgid "The temperature used for the heated build plate. If this is 0, the build plate is left unheated."
-msgstr ""
+msgstr "A temperatura utilizada na base de construção aquecida. Se este valor for 0, a temperatura da base de construção não é aquecida."
 
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 label"
@@ -2134,7 +2134,8 @@ msgstr "Temperatura da base de construção da camada inicial"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 description"
 msgid "The temperature used for the heated build plate at the first layer. If this is 0, the build plate is left unheated during the first layer."
-msgstr ""
+msgstr "A temperatura utilizada para a base de construção aquecida na primeira camada. Se este valor for 0, a temperatura da base de construção não é aquecida"
+" durante a primeira camada."
 
 #: fdmprinter.def.json
 msgctxt "material_adhesion_tendency label"
@@ -2159,12 +2160,12 @@ msgstr "Energia da superfície."
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage label"
 msgid "Scaling Factor Shrinkage Compensation"
-msgstr ""
+msgstr "Compensação de redução do fator de escala"
 
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage description"
 msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor."
-msgstr ""
+msgstr "Para compensar a redução do material quando arrefece, o modelo vai ser dimensionado com este fator."
 
 #: fdmprinter.def.json
 msgctxt "material_crystallinity label"
@@ -5225,7 +5226,9 @@ msgstr "Classificação de processamento de malha"
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
 msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr ""
+msgstr "Determina a prioridade desta malha quando se consideram várias malhas de enchimento em sobreposição. As áreas com sobreposição de várias malhas de enchimento"
+" vão assumir as definições da malha com a classificação mais baixa. Uma malha de enchimento com uma ordem superior irá modificar o enchimento das malhas"
+" de enchimento com uma ordem inferior e as malhas normais."
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"

resources/i18n/ru_RU/cura.po

@@ -46,7 +46,7 @@ msgstr "Не переопределен"
 #, python-brace-format
 msgctxt "@label {0} is the name of a printer that's about to be deleted."
 msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr ""
+msgstr "Действительно удалить {0}? Это действие невозможно будет отменить!"
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
@@ -522,7 +522,7 @@ msgstr "Не удалось импортировать профиль из <file
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
-msgstr ""
+msgstr "Профиль {0} успешно импортирован."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
@@ -549,7 +549,7 @@ msgstr "У профайла отсутствует тип качества."
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
 msgctxt "@info:status"
 msgid "Global stack is missing."
-msgstr ""
+msgstr "Общий стек отсутствует."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
 msgctxt "@info:status"
@@ -560,13 +560,14 @@ msgstr "Невозможно добавить профиль."
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr ""
+msgstr "Тип качества \"{0}\" несовместим с текущим определением активной машины \"{1}\"."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr ""
+msgstr "Внимание! Профиль не отображается, так как его тип качества \"{0}\" недоступен для текущей конфигурации. Выберите комбинацию материала и сопла, которым"
+" подходит этот тип качества."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
@@ -785,7 +786,7 @@ msgstr "Права на запись рабочей среды отсутств
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr ""
+msgstr "Операционная система не позволяет сохранять файл проекта в этом каталоге или с этим именем файла."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
 msgctxt "@error:zip"
@@ -1338,7 +1339,7 @@ msgstr "Подключено через облако"
 #, python-brace-format
 msgctxt "@error:send"
 msgid "Unknown error code when uploading print job: {0}"
-msgstr ""
+msgstr "Неизвестный код ошибки при загрузке задания печати: {0}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
@@ -1352,7 +1353,7 @@ msgstr[2] "новых принтеров обнаружено из учетно
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
-msgstr ""
+msgstr "Добавление принтера {name} ({model}) из вашей учетной записи"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
@@ -1366,7 +1367,7 @@ msgstr[2] ""
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
-msgstr ""
+msgstr "Принтеры, добавленные из Digital Factory:"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
@@ -1388,13 +1389,13 @@ msgstr[2] "Эти принтеры не подключены Digital Factory:"
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
-msgstr ""
+msgstr "Ultimaker Digital Factory"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
-msgstr ""
+msgstr "Чтобы установить подключение, перейдите на сайт {website_link}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
@@ -1410,19 +1411,19 @@ msgstr "Удалить принтеры"
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
-msgstr ""
+msgstr "{printer_name} будет удален до следующей синхронизации учетной записи."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
-msgstr ""
+msgstr "Чтобы удалить {printer_name} без возможности восстановления, перейдите на сайт {digital_factory_link}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
-msgstr ""
+msgstr "Действительно удалить {printer_name} временно?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
@@ -1447,7 +1448,7 @@ msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr ""
+msgstr "Вы удаляете все принтеры из Cura. Это действие невозможно будет отменить.Продолжить?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
 msgctxt "@info:status"
@@ -1534,12 +1535,12 @@ msgstr "Загрузка задания печати в принтер."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
-msgstr ""
+msgstr "Очередь заданий печати заполнена. Принтер не может принять новое задание."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
-msgstr ""
+msgstr "Очередь заполнена"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
@@ -3726,12 +3727,12 @@ msgstr "Библиотека отслеживания ошибок Python"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
-msgstr ""
+msgstr "Библиотека упаковки полигонов, разработанная Prusa Research"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
-msgstr ""
+msgstr "Интерфейс Python для libnest2d"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
@@ -3784,7 +3785,8 @@ msgid ""
 "You have customized some profile settings.\n"
 "Would you like to Keep these changed settings after switching profiles?\n"
 "Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
+msgstr "Вы изменили некоторые настройки профиля.\nСохранить измененные настройки после переключения профилей?\nИзменения можно отменить и загрузить настройки по"
+" умолчанию из \"%1\"."
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
 msgctxt "@title:column"
@@ -5224,7 +5226,7 @@ msgstr "Имя принтера"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
 msgctxt "@text"
 msgid "Please name your printer"
-msgstr ""
+msgstr "Присвойте имя принтеру"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
@@ -5964,12 +5966,12 @@ msgstr "Обновление версии с 4.6.2 до 4.7"
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
 msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
+msgstr "Обновляет конфигурации Cura 4.7 до Cura 4.8."
 
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
 msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
+msgstr "Обновление версии 4.7 до 4.8"
 
 #: X3DReader/plugin.json
 msgctxt "description"

resources/i18n/ru_RU/fdmprinter.def.json.po

@@ -2062,7 +2062,7 @@ msgstr "Температура стола"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature description"
 msgid "The temperature used for the heated build plate. If this is 0, the build plate is left unheated."
-msgstr ""
+msgstr "Температура, задаваемая для нагреваемой печатной пластины. Если значение равно 0, печатная пластина не нагревается."
 
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 label"
@@ -2072,7 +2072,7 @@ msgstr "Температура стола для первого слоя"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 description"
 msgid "The temperature used for the heated build plate at the first layer. If this is 0, the build plate is left unheated during the first layer."
-msgstr ""
+msgstr "Температура, задаваемая для нагреваемой печатной пластины на первом слое. Если значение равно 0, печатная пластина не нагревается при печати первого слоя."
 
 #: fdmprinter.def.json
 msgctxt "material_adhesion_tendency label"
@@ -2097,12 +2097,12 @@ msgstr "Поверхностная энергия."
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage label"
 msgid "Scaling Factor Shrinkage Compensation"
-msgstr ""
+msgstr "Коэффициент масштабирования для компенсации усадки"
 
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage description"
 msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor."
-msgstr ""
+msgstr "Для компенсации усадки материала при остывании модель будет масштабирована с этим коэффициентом."
 
 #: fdmprinter.def.json
 msgctxt "material_crystallinity label"
@@ -5076,7 +5076,9 @@ msgstr "Порядок обработки объекта"
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
 msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr ""
+msgstr "Определяет приоритет данного объекта при вычислении нескольких перекрывающихся заполняющих объектов. К областям с несколькими перекрывающимися заполняющими"
+" объектами будут применяться настройки объекта более низкого порядка. Заполняющий объект более высокого порядка будет модифицировать заполнение объектов"
+" более низких порядков и обычных объектов."
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"

resources/i18n/tr_TR/cura.po

@@ -46,7 +46,7 @@ msgstr "Geçersiz kılınmadı"
 #, python-brace-format
 msgctxt "@label {0} is the name of a printer that's about to be deleted."
 msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr ""
+msgstr "{0} yazıcısını kaldırmak istediğinizden emin misiniz? Bu işlem geri alınamaz!"
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
@@ -522,7 +522,7 @@ msgstr "<filename>{0}</filename> dosyasından profil içe aktarımı başarısı
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
-msgstr ""
+msgstr "{0} profili başarıyla içe aktarıldı."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
@@ -549,7 +549,7 @@ msgstr "Profilde eksik bir kalite tipi var."
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
 msgctxt "@info:status"
 msgid "Global stack is missing."
-msgstr ""
+msgstr "Genel yığın eksik."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
 msgctxt "@info:status"
@@ -560,13 +560,14 @@ msgstr "Profil eklenemiyor."
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr ""
+msgstr "'{0}' kalite tipi, mevcut aktif makine tanımı '{1}' ile uyumlu değil."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr ""
+msgstr "Uyarı: Profilin '{0}' kalite tipi, mevcut yapılandırma için kullanılabilir olmadığından profil görünür değil. Bu kalite tipini kullanabilen malzeme/nozül"
+" kombinasyonuna geçiş yapın."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
@@ -785,7 +786,7 @@ msgstr "Burada çalışma alanını yazmak için izin yok."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr ""
+msgstr "İşletim sistemi, proje dosyalarının bu konuma veya bu dosya adıyla kaydedilmesine izin vermiyor."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
 msgctxt "@error:zip"
@@ -1338,7 +1339,7 @@ msgstr "Bulut üzerinden bağlı"
 #, python-brace-format
 msgctxt "@error:send"
 msgid "Unknown error code when uploading print job: {0}"
-msgstr ""
+msgstr "Baskı işi yüklenirken bilinmeyen hata kodu: {0}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
@@ -1351,7 +1352,7 @@ msgstr[1] "Ultimaker hesabınızdan yeni yazıcılar tespit edildi"
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
-msgstr ""
+msgstr "{name} yazıcısı ({model}) hesabınızdan ekleniyor"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
@@ -1364,7 +1365,7 @@ msgstr[1] ""
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
-msgstr ""
+msgstr "Digital Factory'den eklenen yazıcılar:"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
@@ -1384,13 +1385,13 @@ msgstr[1] "Bu yazıcılar Digital Factory ile bağlantılandırılmamış:"
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
-msgstr ""
+msgstr "Ultimaker Digital Factory"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
-msgstr ""
+msgstr "Bağlantı kurmak için lütfen {website_link} adresini ziyaret edin"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
@@ -1406,19 +1407,19 @@ msgstr "Yazıcıları kaldır"
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
-msgstr ""
+msgstr "{printer_name} yazıcısı bir sonraki hesap senkronizasyonuna kadar kaldırılacak."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
-msgstr ""
+msgstr "{printer_name} yazıcısını kalıcı olarak kaldırmak için {digital_factory_link} adresini ziyaret edin"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
-msgstr ""
+msgstr "{printer_name} yazıcısını geçici olarak kaldırmak istediğinizden emin misiniz?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
@@ -1442,7 +1443,7 @@ msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr ""
+msgstr "Tüm yazıcıları Cura'dan kaldırmak üzeresiniz. Bu işlem geri alınamaz.\nDevam etmek istediğinizden emin misiniz?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
 msgctxt "@info:status"
@@ -1529,12 +1530,12 @@ msgstr "Baskı işi yazıcıya yükleniyor."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
-msgstr ""
+msgstr "Baskı işi kuyruğu dolu. Yazıcı yeni iş kabul edemez."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
-msgstr ""
+msgstr "Kuyruk Dolu"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
@@ -3714,12 +3715,12 @@ msgstr "Python Hata takip kitaplığı"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
-msgstr ""
+msgstr "Prusa Research tarafından geliştirilen Poligon paketleme kitaplığı"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
-msgstr ""
+msgstr "libnest2d için Python bağlamaları"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
@@ -3772,7 +3773,8 @@ msgid ""
 "You have customized some profile settings.\n"
 "Would you like to Keep these changed settings after switching profiles?\n"
 "Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
+msgstr "Bazı profil ayarlarını özelleştirdiniz.\nProfiller arasında geçiş yapıldıktan sonra bu değişiklikleri tutmak ister misiniz?\nAlternatif olarak, '%1' üzerinden"
+" varsayılanları yüklemek için değişiklikleri silebilirsiniz."
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
 msgctxt "@title:column"
@@ -5207,7 +5209,7 @@ msgstr "Yazıcı adı"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
 msgctxt "@text"
 msgid "Please name your printer"
-msgstr ""
+msgstr "Lütfen yazıcınızı adlandırın"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
@@ -5947,12 +5949,12 @@ msgstr "4.6.2'den 4.7'ye Sürüm Yükseltme"
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
 msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
+msgstr "Yapılandırmaları Cura 4.7'den Cura 4.8'e yükseltir."
 
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
 msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
+msgstr "4.7'den 4.8'e Sürüm Yükseltme"
 
 #: X3DReader/plugin.json
 msgctxt "description"

resources/i18n/tr_TR/fdmprinter.def.json.po

@@ -2061,7 +2061,7 @@ msgstr "Yapı Levhası Sıcaklığı"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature description"
 msgid "The temperature used for the heated build plate. If this is 0, the build plate is left unheated."
-msgstr ""
+msgstr "Isıtıcı yapı plakası için kullanılan sıcaklık. Bu değer 0 olduğunda yapı plakası ısıtılmaz."
 
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 label"
@@ -2071,7 +2071,7 @@ msgstr "İlk Katman Yapı Levhası Sıcaklığı"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 description"
 msgid "The temperature used for the heated build plate at the first layer. If this is 0, the build plate is left unheated during the first layer."
-msgstr ""
+msgstr "İlk katmanda ısıtıcı yapı plakası için kullanılan sıcaklık. Bu değer 0 olduğunda yapı plakası ilk katman boyunca ısıtılmaz."
 
 #: fdmprinter.def.json
 msgctxt "material_adhesion_tendency label"
@@ -2096,12 +2096,12 @@ msgstr "Yüzey enerjisi."
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage label"
 msgid "Scaling Factor Shrinkage Compensation"
-msgstr ""
+msgstr "Ölçekleme Faktörü Büzülme Telafisi"
 
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage description"
 msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor."
-msgstr ""
+msgstr "Malzemenin soğudukça büzülmesini telafi etmek için model bu faktöre göre ölçeklenecektir."
 
 #: fdmprinter.def.json
 msgctxt "material_crystallinity label"
@@ -5075,7 +5075,8 @@ msgstr "Örgü İşleme Sıralaması"
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
 msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr ""
+msgstr "Çakışan birden çok dolgu örgüsünü göz önüne alarak bu örgünün önceliğini belirler. Birden çok dolgu örgüsünün çakıştığı alanlar en düşük sıralamaya sahip"
+" örgünün ayarlarını alacaktır. Daha yüksek sıralamaya sahip dolgu örgüsü, dolgu örgülerinin dolgusunu daha düşük sıralı ve normal örgüler ile değiştirecektir."
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"

resources/i18n/zh_CN/cura.po

@@ -46,7 +46,7 @@ msgstr "未覆盖"
 #, python-brace-format
 msgctxt "@label {0} is the name of a printer that's about to be deleted."
 msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr ""
+msgstr "是否确实要删除 {0}？此操作无法撤消！"
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
@@ -522,7 +522,7 @@ msgstr "无法从 <filename>{0}</filename> 导入配置文件："
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
-msgstr ""
+msgstr "已成功导入配置文件 {0}。"
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
@@ -549,7 +549,7 @@ msgstr "配置文件缺少打印质量类型定义。"
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
 msgctxt "@info:status"
 msgid "Global stack is missing."
-msgstr ""
+msgstr "缺少全局堆栈。"
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
 msgctxt "@info:status"
@@ -560,13 +560,13 @@ msgstr "无法添加配置文件。"
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr ""
+msgstr "质量类型“{0}”与当前有效的机器定义“{1}”不兼容。"
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr ""
+msgstr "警告：配置文件不可见，因为其质量类型“{0}”对当前配置不可用。请切换到可使用此质量类型的材料/喷嘴组合。"
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
@@ -785,7 +785,7 @@ msgstr "没有在此处写入工作区的权限。"
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr ""
+msgstr "操作系统不允许向此位置或用此文件名保存项目文件。"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
 msgctxt "@error:zip"
@@ -1338,7 +1338,7 @@ msgstr "通过云连接"
 #, python-brace-format
 msgctxt "@error:send"
 msgid "Unknown error code when uploading print job: {0}"
-msgstr ""
+msgstr "上传打印作业时出现未知错误代码：{0}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
@@ -1350,7 +1350,7 @@ msgstr[0] "从您的 Ultimaker 帐户中检测到新的打印机"
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
-msgstr ""
+msgstr "正在从您的帐户添加打印机 {name} ({model})"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
@@ -1362,7 +1362,7 @@ msgstr[0] ""
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
-msgstr ""
+msgstr "从 Digital Factory 添加的打印机："
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
@@ -1380,13 +1380,13 @@ msgstr[0] "这些打印机未链接到 Digital Factory："
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
-msgstr ""
+msgstr "Ultimaker Digital Factory"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
-msgstr ""
+msgstr "要建立连接，请访问 {website_link}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
@@ -1402,19 +1402,19 @@ msgstr "删除打印机"
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
-msgstr ""
+msgstr "将删除 {printer_name}，直到下次帐户同步为止。"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
-msgstr ""
+msgstr "要永久删除 {printer_name}，请访问 {digital_factory_link}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
-msgstr ""
+msgstr "是否确实要暂时删除 {printer_name}？"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
@@ -1437,7 +1437,7 @@ msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr ""
+msgstr "您即将从 Cura 中删除所有打印机。此操作无法撤消。\n是否确定继续？"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
 msgctxt "@info:status"
@@ -1524,12 +1524,12 @@ msgstr "正在将打印作业上传至打印机。"
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
-msgstr ""
+msgstr "打印作业队列已满。打印机无法接受新作业。"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
-msgstr ""
+msgstr "队列已满"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
@@ -3702,12 +3702,12 @@ msgstr "Python 错误跟踪库"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
-msgstr ""
+msgstr "Prusa Research 开发的多边形打包库"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
-msgstr ""
+msgstr "libnest2d 的 Python 绑定"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
@@ -3760,7 +3760,7 @@ msgid ""
 "You have customized some profile settings.\n"
 "Would you like to Keep these changed settings after switching profiles?\n"
 "Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
+msgstr "您已经自定义了若干配置文件设置。\n是否要在切换配置文件后保留这些更改的设置？\n或者，也可舍弃更改以从“%1”加载默认值。"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
 msgctxt "@title:column"
@@ -5190,7 +5190,7 @@ msgstr "打印机名称"
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
 msgctxt "@text"
 msgid "Please name your printer"
-msgstr ""
+msgstr "请为您的打印机命名"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
@@ -5930,12 +5930,12 @@ msgstr "版本从 4.6.2 升级到 4.7"
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
 msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
+msgstr "将配置从 Cura 4.7 升级到 Cura 4.8。"
 
 #: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
 msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
+msgstr "将版本从 4.7 升级到 4.8"
 
 #: X3DReader/plugin.json
 msgctxt "description"

resources/i18n/zh_CN/fdmprinter.def.json.po

@@ -2062,7 +2062,7 @@ msgstr "打印平台温度"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature description"
 msgid "The temperature used for the heated build plate. If this is 0, the build plate is left unheated."
-msgstr ""
+msgstr "用于加热构建板的温度。如果此项为 0，则保持不加热构建板。"
 
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 label"
@@ -2072,7 +2072,7 @@ msgstr "打印平台温度起始层"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 description"
 msgid "The temperature used for the heated build plate at the first layer. If this is 0, the build plate is left unheated during the first layer."
-msgstr ""
+msgstr "打印第一层时用于加热构建板的温度。如果此项为 0，则在打印第一层期间保持不加热构建板。"
 
 #: fdmprinter.def.json
 msgctxt "material_adhesion_tendency label"
@@ -2097,12 +2097,12 @@ msgstr "表面能。"
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage label"
 msgid "Scaling Factor Shrinkage Compensation"
-msgstr ""
+msgstr "缩放因子收缩补偿"
 
 #: fdmprinter.def.json
 msgctxt "material_shrinkage_percentage description"
 msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor."
-msgstr ""
+msgstr "为了补偿材料在冷却时的收缩，将用此因子缩放模型。"
 
 #: fdmprinter.def.json
 msgctxt "material_crystallinity label"
@@ -5076,7 +5076,7 @@ msgstr "网格处理等级"
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
 msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr ""
+msgstr "在考虑多个重叠的填充网格时确定此网格的优先级。其中有多个填充网格重叠的区域将采用等级最低的网格的设置。具有较高顺序的填充网格将修改具有较低顺序的填充网格和普通网格的填充。"
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"