Merge pull request #17200 from Ultimaker/Update_Method

Update method profiles

resources/definitions/ultimaker_method_base.def.json

@@ -349,7 +349,7 @@
         "prime_blob_enable": { "enabled": false },
         "prime_tower_base_curve_magnitude": { "value": 2 },
         "prime_tower_base_height": { "value": 6 },
-        "prime_tower_base_size": { "value": 6 },
+        "prime_tower_base_size": { "value": 10 },
         "prime_tower_enable": { "value": false },
         "prime_tower_flow": { "value": "material_flow" },
         "prime_tower_line_width": { "value": 1 },

resources/quality/ultimaker_methodx/um_methodx_1c_um-abscf-175_0.2mm.inst.cfg

@@ -13,7 +13,7 @@ weight = -2
 
 [values]
 cool_fan_enabled = False
-raft_air_gap = 0.3
+raft_airgap = 0.3
 speed_prime_tower = 30.0
 speed_print = 120.0
 speed_roofing = 55

resources/quality/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm.inst.cfg

@@ -13,7 +13,7 @@ weight = -2
 
 [values]
 cool_fan_enabled = False
-raft_air_gap = 0.3
+raft_airgap = 0.3
 speed_prime_tower = 30.0
 speed_print = 120.0
 speed_roofing = 55

resources/quality/ultimaker_methodx/um_methodx_2xa_um-rapidrinse-175_0.2mm.inst.cfg

@@ -13,6 +13,8 @@ weight = -2
 
 [values]
 brim_replaces_support = False
+cool_fan_enabled = False
+cool_min_temperature = =material_print_temperature
 raft_airgap = 0.0
 retract_at_layer_change = True
 speed_prime_tower = 25.0

resources/quality/ultimaker_methodx/um_methodx_lab_um-abscf-175_0.2mm.inst.cfg

@@ -13,7 +13,7 @@ weight = -2
 
 [values]
 cool_fan_enabled = False
-raft_air_gap = 0.3
+raft_airgap = 0.3
 speed_prime_tower = 30.0
 speed_print = 120.0
 speed_roofing = 55

resources/quality/ultimaker_methodx/um_methodx_lab_um-absr-175_0.2mm.inst.cfg

@@ -13,7 +13,7 @@ weight = -2
 
 [values]
 cool_fan_enabled = False
-raft_air_gap = 0.3
+raft_airgap = 0.3
 speed_prime_tower = 30.0
 speed_print = 120.0
 speed_roofing = 55

resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abscf-175_0.2mm.inst.cfg

@@ -15,7 +15,7 @@ weight = -2
 build_volume_temperature = 85
 cool_fan_enabled = False
 default_material_bed_temperature = 95
-raft_air_gap = 0.3
+raft_airgap = 0.3
 speed_prime_tower = 30.0
 speed_print = 120.0
 speed_roofing = 55

resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg

@@ -15,7 +15,7 @@ weight = -2
 build_volume_temperature = 85
 cool_fan_enabled = False
 default_material_bed_temperature = 95
-raft_air_gap = 0.3
+raft_airgap = 0.3
 speed_prime_tower = 30.0
 speed_print = 120.0
 speed_roofing = 55

resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-rapidrinse-175_0.2mm.inst.cfg

@@ -13,6 +13,8 @@ weight = -2
 
 [values]
 brim_replaces_support = False
+cool_fan_enabled = False
+cool_min_temperature = =material_print_temperature
 raft_airgap = 0.0
 retract_at_layer_change = True
 speed_prime_tower = 25.0

resources/quality/ultimaker_methodxl/um_methodxl_lab_um-abscf-175_0.2mm.inst.cfg

@@ -15,7 +15,7 @@ weight = -2
 build_volume_temperature = 85
 cool_fan_enabled = False
 default_material_bed_temperature = 95
-raft_air_gap = 0.3
+raft_airgap = 0.3
 speed_prime_tower = 30.0
 speed_print = 120.0
 speed_roofing = 55

resources/quality/ultimaker_methodxl/um_methodxl_lab_um-absr-175_0.2mm.inst.cfg

@@ -15,7 +15,7 @@ weight = -2
 build_volume_temperature = 85
 cool_fan_enabled = False
 default_material_bed_temperature = 95
-raft_air_gap = 0.3
+raft_airgap = 0.3
 speed_prime_tower = 30.0
 speed_print = 120.0
 speed_roofing = 55