Merge branch 'PP-202_autogenerate_intent_profiles' of github.com:Ultimaker/Cura

resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg

@@ -12,16 +12,12 @@ material = generic_abs
 variant = AA 0.4
 
 [values]
+infill_sparse_density = 15
+jerk_print = 30
 speed_infill = =speed_print
+speed_layer_0 = 20
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
-speed_layer_0 = 20
 top_bottom_thickness = 0.8
-infill_sparse_density = 15
-
-jerk_print = 30
-
-
-

resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg

@@ -12,22 +12,13 @@ material = generic_abs
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3

resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg

@@ -12,22 +12,13 @@ material = generic_abs
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3

resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg

@@ -12,17 +12,13 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-

resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg

@@ -12,17 +12,13 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-

resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg

@@ -12,23 +12,13 @@ material = generic_cpe
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-

resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg

@@ -12,17 +12,13 @@ material = generic_cpe
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-

resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg

@@ -12,17 +12,13 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-

resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg

@@ -12,17 +12,13 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-

resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg

@@ -12,17 +12,13 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-

resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg

@@ -12,17 +12,13 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-

resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg

@@ -12,17 +12,13 @@ material = generic_petg
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-

resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg

@@ -12,17 +12,13 @@ material = generic_petg
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-

resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg

@@ -12,21 +12,12 @@ material = generic_pla
 variant = AA 0.4
 
 [values]
+infill_sparse_density = 15
+jerk_print = 30
 speed_infill = =speed_print
+speed_layer_0 = 20
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
-speed_layer_0 = 20
 top_bottom_thickness = 0.8
-infill_sparse_density = 15
-
-jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
-
-

resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg

@@ -12,16 +12,13 @@ material = generic_pla
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3

resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg

@@ -12,16 +12,13 @@ material = generic_pla
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3

resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg

@@ -11,22 +11,17 @@ quality_type = verydraft
 material = generic_pla
 variant = AA 0.4
 is_experimental = True
-
 [values]
-infill_sparse_density = 10
-
-jerk_print = 30
-
 acceleration_print = 4000
 acceleration_wall = 2000
 acceleration_wall_0 = 2000
-
+infill_sparse_density = 10
-speed_print = 50
+jerk_print = 30
 speed_infill = =speed_print
+speed_layer_0 = 20
+speed_print = 50
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
-speed_layer_0 = 20
+top_bottom_thickness = 0.8
-
-top_bottom_thickness = 0.8

resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg

@@ -12,21 +12,12 @@ material = generic_tough_pla
 variant = AA 0.4
 
 [values]
+infill_sparse_density = 15
+jerk_print = 30
 speed_infill = =speed_print
+speed_layer_0 = 20
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
-speed_layer_0 = 20
 top_bottom_thickness = 0.8
-infill_sparse_density = 15
-
-jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
-
-

resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg

@@ -12,16 +12,13 @@ material = generic_tough_pla
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3

resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg

@@ -12,16 +12,13 @@ material = generic_tough_pla
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3

resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg

@@ -11,28 +11,17 @@ quality_type = verydraft
 material = generic_tough_pla
 variant = AA 0.4
 is_experimental = True
-
 [values]
-infill_sparse_density = 10
-
-jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
-
 acceleration_print = 4000
 acceleration_wall = 2000
 acceleration_wall_0 = 2000
-
+infill_sparse_density = 10
-speed_print = 50
+jerk_print = 30
 speed_infill = =speed_print
+speed_layer_0 = 20
+speed_print = 50
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
-speed_layer_0 = 20
+top_bottom_thickness = 0.8
-
-top_bottom_thickness = 0.8

resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg

@@ -12,16 +12,12 @@ material = generic_abs
 variant = AA 0.4
 
 [values]
+infill_sparse_density = 15
+jerk_print = 30
 speed_infill = =speed_print
+speed_layer_0 = 20
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
-speed_layer_0 = 20
 top_bottom_thickness = 0.8
-infill_sparse_density = 15
-
-jerk_print = 30
-
-
-

resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg

@@ -12,17 +12,13 @@ material = generic_abs
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg

@@ -12,17 +12,13 @@ material = generic_abs
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg

@@ -12,18 +12,13 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-

resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg

@@ -12,18 +12,13 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-

resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg

@@ -12,18 +12,13 @@ material = generic_cpe
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-

resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg

@@ -12,18 +12,13 @@ material = generic_cpe
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-

resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg

@@ -12,18 +12,13 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-

resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg

@@ -12,18 +12,13 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-

resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg

@@ -12,18 +12,13 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-

resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg

@@ -12,18 +12,13 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-

resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg

@@ -12,18 +12,13 @@ material = generic_petg
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-

resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg

@@ -12,18 +12,13 @@ material = generic_petg
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-

resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg

@@ -12,16 +12,12 @@ material = generic_pla
 variant = AA 0.4
 
 [values]
+infill_sparse_density = 15
+jerk_print = 30
 speed_infill = =speed_print
+speed_layer_0 = 20
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
-speed_layer_0 = 20
 top_bottom_thickness = 0.8
-infill_sparse_density = 15
-
-jerk_print = 30
-
-
-

resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg

@@ -12,17 +12,13 @@ material = generic_pla
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg

@@ -12,17 +12,13 @@ material = generic_pla
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg

@@ -11,22 +11,17 @@ quality_type = verydraft
 material = generic_pla
 variant = AA 0.4
 is_experimental = True
-
 [values]
-infill_sparse_density = 10
-
-jerk_print = 30
-
 acceleration_print = 4000
 acceleration_wall = 2000
 acceleration_wall_0 = 2000
-
+infill_sparse_density = 10
-speed_print = 50
+jerk_print = 30
 speed_infill = =speed_print
+speed_layer_0 = 20
+speed_print = 50
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
-speed_layer_0 = 20
+top_bottom_thickness = 0.8
-
-top_bottom_thickness = 0.8

resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg

@@ -12,16 +12,12 @@ material = generic_tough_pla
 variant = AA 0.4
 
 [values]
+infill_sparse_density = 15
+jerk_print = 30
 speed_infill = =speed_print
+speed_layer_0 = 20
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
-speed_layer_0 = 20
 top_bottom_thickness = 0.8
-infill_sparse_density = 15
-
-jerk_print = 30
-
-
-

resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg

@@ -12,17 +12,13 @@ material = generic_tough_pla
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg

@@ -12,17 +12,13 @@ material = generic_tough_pla
 variant = AA 0.4
 
 [values]
-
 jerk_print = 30
-
-speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
+speed_print = 30
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-
 wall_thickness = =line_width * 3
-xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg

@@ -11,22 +11,17 @@ quality_type = verydraft
 material = generic_tough_pla
 variant = AA 0.4
 is_experimental = True
-
 [values]
-infill_sparse_density = 10
-
-jerk_print = 30
-
 acceleration_print = 4000
 acceleration_wall = 2000
 acceleration_wall_0 = 2000
-
+infill_sparse_density = 10
-speed_print = 50
+jerk_print = 30
 speed_infill = =speed_print
+speed_layer_0 = 20
+speed_print = 50
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
-speed_layer_0 = 20
+top_bottom_thickness = 0.8
-
-top_bottom_thickness = 0.8