Reduce redundant variants

resources/quality/flyingbear/abs/flyingbear_0.25_abs_super.inst.cfg

@@ -8,7 +8,7 @@ setting_version = 11
 type = quality
 quality_type = super
 material = generic_abs
-variant = 0.2mm Nozzle
+variant = 0.25mm Nozzle
 
 [values]
-wall_thickness = =line_width*8
+wall_thickness = =line_width*6

resources/quality/flyingbear/abs/flyingbear_0.25_abs_ultra.inst.cfg

@@ -8,7 +8,7 @@ setting_version = 11
 type = quality
 quality_type = ultra
 material = generic_abs
-variant = 0.2mm Nozzle
+variant = 0.25mm Nozzle
 
 [values]
-wall_thickness = =line_width*8
+wall_thickness = =line_width*6

resources/quality/flyingbear/abs/flyingbear_0.3_abs_adaptive.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Dynamic Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = adaptive
-material = generic_abs
-variant = 0.3mm Nozzle
-
-[values]
-wall_thickness = =line_width*4

resources/quality/flyingbear/abs/flyingbear_0.3_abs_low.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Low Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = low
-material = generic_abs
-variant = 0.3mm Nozzle
-
-[values]
-wall_thickness = =line_width*4

resources/quality/flyingbear/abs/flyingbear_0.3_abs_standard.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = normal
-material = generic_abs
-variant = 0.3mm Nozzle
-
-[values]
-wall_thickness = =line_width*4

resources/quality/flyingbear/abs/flyingbear_0.5_abs_adaptive.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Dynamic Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = adaptive
-material = generic_abs
-variant = 0.5mm Nozzle
-
-[values]
-wall_thickness = =line_width*4

resources/quality/flyingbear/abs/flyingbear_0.5_abs_low.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Low Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = low
-material = generic_abs
-variant = 0.5mm Nozzle
-
-[values]
-wall_thickness = =line_width*4

resources/quality/flyingbear/abs/flyingbear_0.5_abs_standard.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = normal
-material = generic_abs
-variant = 0.5mm Nozzle
-
-[values]
-wall_thickness = =line_width*4

resources/quality/flyingbear/abs/flyingbear_0.5_abs_super.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Super Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = super
-material = generic_abs
-variant = 0.5mm Nozzle
-
-[values]
-wall_thickness = =line_width*4

resources/quality/flyingbear/abs/flyingbear_0.6_abs_standard.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = normal
-material = generic_abs
-variant = 0.6mm Nozzle
-
-[values]
-wall_thickness = =line_width*3

resources/quality/flyingbear/hips/flyingbear_0.25_hips_super.inst.cfg

@@ -8,7 +8,7 @@ setting_version = 11
 type = quality
 quality_type = super
 material = generic_hips
-variant = 0.3mm Nozzle
+variant = 0.25mm Nozzle
 
 [values]
-wall_thickness = =line_width*4
+wall_thickness = =line_width*6

resources/quality/flyingbear/hips/flyingbear_0.25_hips_ultra.inst.cfg

@@ -8,7 +8,7 @@ setting_version = 11
 type = quality
 quality_type = ultra
 material = generic_hips
-variant = 0.2mm Nozzle
+variant = 0.25mm Nozzle
 
 [values]
-wall_thickness = =line_width*8
+wall_thickness = =line_width*6

resources/quality/flyingbear/hips/flyingbear_0.2_hips_super.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Super Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = super
-material = generic_hips
-variant = 0.2mm Nozzle
-
-[values]
-wall_thickness = =line_width*8

resources/quality/flyingbear/hips/flyingbear_0.3_hips_adaptive.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Dynamic Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = adaptive
-material = generic_hips
-variant = 0.3mm Nozzle
-
-[values]
-wall_thickness = =line_width*4

resources/quality/flyingbear/hips/flyingbear_0.3_hips_low.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Low Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = low
-material = generic_hips
-variant = 0.3mm Nozzle
-
-[values]
-wall_thickness = =line_width*4

resources/quality/flyingbear/hips/flyingbear_0.3_hips_standard.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = normal
-material = generic_hips
-variant = 0.3mm Nozzle
-
-[values]
-wall_thickness = =line_width*4

resources/quality/flyingbear/hips/flyingbear_0.5_hips_adaptive.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Dynamic Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = adaptive
-material = generic_hips
-variant = 0.5mm Nozzle
-
-[values]
-wall_thickness = =line_width*4

resources/quality/flyingbear/hips/flyingbear_0.5_hips_low.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Low Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = low
-material = generic_hips
-variant = 0.5mm Nozzle
-
-[values]
-wall_thickness = =line_width*4

resources/quality/flyingbear/hips/flyingbear_0.5_hips_standard.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = normal
-material = generic_hips
-variant = 0.5mm Nozzle
-
-[values]
-wall_thickness = =line_width*4

resources/quality/flyingbear/hips/flyingbear_0.5_hips_super.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Super Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = super
-material = generic_hips
-variant = 0.5mm Nozzle
-
-[values]
-wall_thickness = =line_width*4

resources/quality/flyingbear/hips/flyingbear_0.6_hips_standard.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = normal
-material = generic_hips
-variant = 0.6mm Nozzle
-
-[values]
-wall_thickness = =line_width*3

resources/quality/flyingbear/hips/flyingbear_1.0_hips_draft.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Draft Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = draft
-material = generic_hips
-variant = 1.0mm Nozzle
-
-[values]
-wall_thickness = =line_width*3

resources/quality/flyingbear/petg/flyingbear_0.25_petg_super.inst.cfg

@@ -8,9 +8,9 @@ setting_version = 11
 type = quality
 quality_type = super
 material = generic_petg
-variant = 0.2mm Nozzle
+variant = 0.25mm Nozzle
 
 [values]
 speed_layer_0 = 15
-wall_thickness = =line_width*8
+wall_thickness = =line_width*6
 

resources/quality/flyingbear/petg/flyingbear_0.25_petg_ultra.inst.cfg

@@ -8,8 +8,8 @@ setting_version = 11
 type = quality
 quality_type = ultra
 material = generic_petg
-variant = 0.2mm Nozzle
+variant = 0.25mm Nozzle
 
 [values]
 speed_layer_0 = 15
-wall_thickness = =line_width*8
+wall_thickness = =line_width*6

resources/quality/flyingbear/petg/flyingbear_0.3_petg_adaptive.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Dynamic Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = adaptive
-material = generic_petg
-variant = 0.3mm Nozzle
-
-[values]
-speed_layer_0 = 15
-wall_thickness = =line_width*4

resources/quality/flyingbear/petg/flyingbear_0.3_petg_low.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Low Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = low
-material = generic_petg
-variant = 0.3mm Nozzle
-
-[values]
-speed_layer_0 = 15
-wall_thickness = =line_width*4

resources/quality/flyingbear/petg/flyingbear_0.3_petg_standard.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = normal
-material = generic_petg
-variant = 0.3mm Nozzle
-
-[values]
-speed_layer_0 = 15
-wall_thickness = =line_width*4

resources/quality/flyingbear/petg/flyingbear_0.3_petg_super.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Super Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = super
-material = generic_petg
-variant = 0.3mm Nozzle
-
-[values]
-speed_layer_0 = 15
-wall_thickness = =line_width*4

resources/quality/flyingbear/petg/flyingbear_0.5_petg_adaptive.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Dynamic Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = adaptive
-material = generic_petg
-variant = 0.5mm Nozzle
-
-[values]
-speed_layer_0 = 15
-wall_thickness = =line_width*4

resources/quality/flyingbear/petg/flyingbear_0.5_petg_low.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Low Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = low
-material = generic_petg
-variant = 0.5mm Nozzle
-
-[values]
-speed_layer_0 = 15
-wall_thickness = =line_width*4

resources/quality/flyingbear/petg/flyingbear_0.5_petg_standard.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = normal
-material = generic_petg
-variant = 0.5mm Nozzle
-
-[values]
-speed_layer_0 = 15
-wall_thickness = =line_width*4

resources/quality/flyingbear/petg/flyingbear_0.5_petg_super.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Super Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = super
-material = generic_petg
-variant = 0.5mm Nozzle
-
-[values]
-speed_layer_0 = 15
-wall_thickness = =line_width*4

resources/quality/flyingbear/petg/flyingbear_0.6_petg_standard.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = normal
-material = generic_petg
-variant = 0.6mm Nozzle
-
-[values]
-speed_layer_0 = 15
-wall_thickness = =line_width*3

resources/quality/flyingbear/petg/flyingbear_1.0_petg_draft.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Draft Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = draft
-material = generic_petg
-variant = 1.0mm Nozzle
-
-[values]
-speed_layer_0 = 15
-wall_thickness = =line_width*3

resources/quality/flyingbear/pla/flyingbear_0.25_pla_super.inst.cfg

@@ -8,6 +8,7 @@ setting_version = 11
 type = quality
 quality_type = super
 material = generic_pla
-variant = 0.2mm Nozzle
+variant = 0.25mm Nozzle
 
 [values]
+wall_thickness = =line_width*6

resources/quality/flyingbear/pla/flyingbear_0.25_pla_ultra.inst.cfg

@@ -8,6 +8,7 @@ setting_version = 11
 type = quality
 quality_type = ultra
 material = generic_pla
-variant = 0.2mm Nozzle
+variant = 0.25mm Nozzle
 
 [values]
+wall_thickness = =line_width*6

resources/quality/flyingbear/pla/flyingbear_0.3_pla_adaptive.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Dynamic Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = adaptive
-material = generic_pla
-variant = 0.3mm Nozzle
-
-[values]

resources/quality/flyingbear/pla/flyingbear_0.3_pla_low.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Low Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = low
-material = generic_pla
-variant = 0.3mm Nozzle
-
-[values]

resources/quality/flyingbear/pla/flyingbear_0.3_pla_standard.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = normal
-material = generic_pla
-variant = 0.3mm Nozzle
-
-[values]

resources/quality/flyingbear/pla/flyingbear_0.3_pla_super.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Super Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = super
-material = generic_pla
-variant = 0.3mm Nozzle
-
-[values]

resources/quality/flyingbear/pla/flyingbear_0.40_pla_adaptive.inst.cfg

@@ -11,3 +11,4 @@ material = generic_pla
 variant = 0.4mm Nozzle
 
 [values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/pla/flyingbear_0.40_pla_low.inst.cfg

@@ -11,3 +11,4 @@ material = generic_pla
 variant = 0.4mm Nozzle
 
 [values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/pla/flyingbear_0.40_pla_standard.inst.cfg

@@ -11,3 +11,4 @@ material = generic_pla
 variant = 0.4mm Nozzle
 
 [values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/pla/flyingbear_0.40_pla_super.inst.cfg

@@ -11,3 +11,4 @@ material = generic_pla
 variant = 0.4mm Nozzle
 
 [values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/pla/flyingbear_0.5_pla_adaptive.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Dynamic Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = adaptive
-material = generic_pla
-variant = 0.5mm Nozzle
-
-[values]

resources/quality/flyingbear/pla/flyingbear_0.5_pla_low.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Low Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = low
-material = generic_pla
-variant = 0.5mm Nozzle
-
-[values]

resources/quality/flyingbear/pla/flyingbear_0.5_pla_standard.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = normal
-material = generic_pla
-variant = 0.5mm Nozzle
-
-[values]

resources/quality/flyingbear/pla/flyingbear_0.5_pla_super.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Super Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = super
-material = generic_pla
-variant = 0.5mm Nozzle
-
-[values]

resources/quality/flyingbear/pla/flyingbear_0.6_pla_draft.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Draft Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = draft
-material = generic_pla
-variant = 0.6mm Nozzle
-
-[values]

resources/quality/flyingbear/pla/flyingbear_0.6_pla_low.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Low Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = low
-material = generic_pla
-variant = 0.6mm Nozzle
-
-[values]

resources/quality/flyingbear/pla/flyingbear_0.6_pla_standard.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = normal
-material = generic_pla
-variant = 0.6mm Nozzle
-
-[values]

resources/quality/flyingbear/pla/flyingbear_0.80_pla_draft.inst.cfg

@@ -11,3 +11,4 @@ material = generic_pla
 variant = 0.8mm Nozzle
 
 [values]
+wall_thickness = =line_width*3

resources/quality/flyingbear/pla/flyingbear_1.0_pla_draft.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Draft Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = draft
-material = generic_pla
-variant = 1.0mm Nozzle
-
-[values]

resources/quality/flyingbear/plapro/flyingbear_0.25_plapro_super.inst.cfg

@@ -7,8 +7,8 @@ definition = flyingbear_base
 setting_version = 11
 type = quality
 quality_type = super
-material = generic_abs
+material = eSUN_PLA_PRO_Black
-variant = 0.3mm Nozzle
+variant = 0.25mm Nozzle
 
 [values]
-wall_thickness = =line_width*4
+wall_thickness = =line_width*6

resources/quality/flyingbear/plapro/flyingbear_0.25_plapro_ultra.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = flyingbear_base
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = ultra
+material = eSUN_PLA_PRO_Black
+variant = 0.25mm Nozzle
+
+[values]
+wall_thickness = =line_width*6

resources/quality/flyingbear/plapro/flyingbear_0.2_plapro_super.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Super Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 9
-type = quality
-quality_type = super
-material = eSUN_PLA_PRO
-variant = 0.2mm Nozzle
-
-[values]

resources/quality/flyingbear/plapro/flyingbear_0.2_plapro_ultra.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Ultra Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 9
-type = quality
-quality_type = ultra
-material = eSUN_PLA_PRO
-variant = 0.2mm Nozzle
-
-[values]

resources/quality/flyingbear/plapro/flyingbear_0.3_plapro_adaptive.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Dynamic Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 9
-type = quality
-quality_type = adaptive
-material = eSUN_PLA_PRO
-variant = 0.3mm Nozzle
-
-[values]

resources/quality/flyingbear/plapro/flyingbear_0.3_plapro_low.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Low Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 9
-type = quality
-quality_type = low
-material = eSUN_PLA_PRO
-variant = 0.3mm Nozzle
-
-[values]

resources/quality/flyingbear/plapro/flyingbear_0.3_plapro_standard.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 9
-type = quality
-quality_type = normal
-material = eSUN_PLA_PRO
-variant = 0.3mm Nozzle
-
-[values]

resources/quality/flyingbear/plapro/flyingbear_0.3_plapro_super.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Super Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 9
-type = quality
-quality_type = super
-material = eSUN_PLA_PRO
-variant = 0.3mm Nozzle
-
-[values]

resources/quality/flyingbear/plapro/flyingbear_0.40_plapro_adaptive.inst.cfg

@@ -4,10 +4,11 @@ name = Dynamic Quality
 definition = flyingbear_base
 
 [metadata]
-setting_version = 9
+setting_version = 11
 type = quality
 quality_type = adaptive
 material = eSUN_PLA_PRO_Black
 variant = 0.4mm Nozzle
 
 [values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/plapro/flyingbear_0.40_plapro_low.inst.cfg

@@ -4,10 +4,11 @@ name = Low Quality
 definition = flyingbear_base
 
 [metadata]
-setting_version = 9
+setting_version = 11
 type = quality
 quality_type = low
 material = eSUN_PLA_PRO_Black
 variant = 0.4mm Nozzle
 
 [values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/plapro/flyingbear_0.40_plapro_standard.inst.cfg

@@ -4,10 +4,11 @@ name = Standard Quality
 definition = flyingbear_base
 
 [metadata]
-setting_version = 9
+setting_version = 11
 type = quality
 quality_type = normal
 material = eSUN_PLA_PRO_Black
 variant = 0.4mm Nozzle
 
 [values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/plapro/flyingbear_0.40_plapro_super.inst.cfg

@@ -4,10 +4,11 @@ name = Super Quality
 definition = flyingbear_base
 
 [metadata]
-setting_version = 9
+setting_version = 11
 type = quality
 quality_type = super
 material = eSUN_PLA_PRO_Black
 variant = 0.4mm Nozzle
 
 [values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/plapro/flyingbear_0.5_plapro_adaptive.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Dynamic Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 9
-type = quality
-quality_type = adaptive
-material = eSUN_PLA_PRO
-variant = 0.5mm Nozzle
-
-[values]

resources/quality/flyingbear/plapro/flyingbear_0.5_plapro_low.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Low Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 9
-type = quality
-quality_type = low
-material = eSUN_PLA_PRO
-variant = 0.5mm Nozzle
-
-[values]

resources/quality/flyingbear/plapro/flyingbear_0.5_plapro_standard.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 9
-type = quality
-quality_type = normal
-material = eSUN_PLA_PRO
-variant = 0.5mm Nozzle
-
-[values]

resources/quality/flyingbear/plapro/flyingbear_0.5_plapro_super.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Super Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 9
-type = quality
-quality_type = super
-material = eSUN_PLA_PRO
-variant = 0.5mm Nozzle
-
-[values]

resources/quality/flyingbear/plapro/flyingbear_0.6_plapro_draft.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Draft Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 9
-type = quality
-quality_type = draft
-material = eSUN_PLA_PRO
-variant = 0.6mm Nozzle
-
-[values]

resources/quality/flyingbear/plapro/flyingbear_0.6_plapro_low.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Low Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 9
-type = quality
-quality_type = low
-material = eSUN_PLA_PRO
-variant = 0.6mm Nozzle
-
-[values]

resources/quality/flyingbear/plapro/flyingbear_0.6_plapro_standard.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 9
-type = quality
-quality_type = normal
-material = eSUN_PLA_PRO
-variant = 0.6mm Nozzle
-
-[values]

resources/quality/flyingbear/plapro/flyingbear_0.80_plapro_draft.inst.cfg

@@ -7,8 +7,8 @@ definition = flyingbear_base
 setting_version = 11
 type = quality
 quality_type = draft
-material = generic_abs
+material = eSUN_PLA_PRO_Black
-variant = 1.0mm Nozzle
+variant = 0.8mm Nozzle
 
 [values]
 wall_thickness = =line_width*3

resources/quality/flyingbear/plapro/flyingbear_0.8_plapro_draft.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Draft Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 9
-type = quality
-quality_type = draft
-material = eSUN_PLA_PRO
-variant = 0.8mm Nozzle
-
-[values]

resources/quality/flyingbear/plapro/flyingbear_1.0_plapro_draft.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Draft Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 9
-type = quality
-quality_type = draft
-material = eSUN_PLA_PRO
-variant = 1.0mm Nozzle
-
-[values]

resources/quality/flyingbear/tpu/flyingbear_0.3_tpu_adaptive.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Dynamic Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = adaptive
-material = generic_tpu
-variant = 0.3mm Nozzle
-
-[values]

resources/quality/flyingbear/tpu/flyingbear_0.3_tpu_standard.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = normal
-material = generic_tpu
-variant = 0.3mm Nozzle
-
-[values]

resources/quality/flyingbear/tpu/flyingbear_0.3_tpu_super.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Super Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = super
-material = generic_tpu
-variant = 0.3mm Nozzle
-
-[values]

resources/quality/flyingbear/tpu/flyingbear_0.40_tpu_adaptive.inst.cfg

@@ -11,3 +11,4 @@ material = generic_tpu
 variant = 0.4mm Nozzle
 
 [values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/tpu/flyingbear_0.40_tpu_standard.inst.cfg

@@ -11,3 +11,4 @@ material = generic_tpu
 variant = 0.4mm Nozzle
 
 [values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/tpu/flyingbear_0.40_tpu_super.inst.cfg

@@ -11,3 +11,4 @@ material = generic_tpu
 variant = 0.4mm Nozzle
 
 [values]
+wall_thickness = =line_width*4

resources/quality/flyingbear/tpu/flyingbear_0.5_tpu_adaptive.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Dynamic Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = adaptive
-material = generic_tpu
-variant = 0.5mm Nozzle
-
-[values]

resources/quality/flyingbear/tpu/flyingbear_0.5_tpu_standard.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = normal
-material = generic_tpu
-variant = 0.5mm Nozzle
-
-[values]

resources/quality/flyingbear/tpu/flyingbear_0.5_tpu_super.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Super Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = super
-material = generic_tpu
-variant = 0.5mm Nozzle
-
-[values]

resources/quality/flyingbear/tpu/flyingbear_0.6_tpu_standard.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 4
-name = Standard Quality
-definition = flyingbear_base
-
-[metadata]
-setting_version = 11
-type = quality
-quality_type = normal
-material = generic_tpu
-variant = 0.6mm Nozzle
-
-[values]