From a5f23939f5c907347eef5a01bd1807f3978d3d1d Mon Sep 17 00:00:00 2001
From: Jaime van Kessel <nallath@gmail.com>
Date: Tue, 6 Sep 2022 11:47:33 +0200
Subject: [PATCH] Fix a few more typos

---
 resources/definitions/SV03.def.json        |  2 +-
 resources/definitions/koonovo_kn5.def.json | 10 ++++------
 2 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/resources/definitions/SV03.def.json b/resources/definitions/SV03.def.json
index b056175b27..9a550c1960 100644
--- a/resources/definitions/SV03.def.json
+++ b/resources/definitions/SV03.def.json
@@ -50,7 +50,7 @@
         "material_initial_print_temperature": { "value": "material_print_temperature" },
         "material_final_print_temperature": { "value": "material_print_temperature" },
         "z_seam_type": { "value": "'back'" },
-        "z_seam_corner": { "value": "'z_seam_corner_weighted'" }, ,
+        "z_seam_corner": { "value": "'z_seam_corner_weighted'" },
         "infill_pattern": { "value": "'lines'" },
         "infill_before_walls": { "value": false },
         "infill_overlap": { "value": 30.0 },
diff --git a/resources/definitions/koonovo_kn5.def.json b/resources/definitions/koonovo_kn5.def.json
index d206c9b87a..3fc8705e52 100644
--- a/resources/definitions/koonovo_kn5.def.json
+++ b/resources/definitions/koonovo_kn5.def.json
@@ -22,9 +22,9 @@
         "preferred_quality_type": "standard",
         "preferred_material": "generic_pla"
     },
-
-        
-    "overrides": {
+    
+    "overrides":
+    {
         "machine_name": { "default_value": "Koonovo KN5" },
         "machine_width": { "default_value": 420 },
         "machine_depth": { "default_value": 420 },
@@ -39,7 +39,6 @@
 
         "gantry_height": { "value": 0 },
 
-
         "machine_extruder_count": { "default_value": 2 },
        
         "machine_start_gcode": {
@@ -64,7 +63,6 @@
 
         "material_diameter": { "default_value": 1.75 },
 
-
         "acceleration_print": { "value": 500 },
         "acceleration_travel": { "value": 500 },
         
@@ -81,7 +79,7 @@
         "material_standby_temperature": { "value": "material_print_temperature" },
         "default_material_bed_temperature": { "value": "45" },
 
-        "speed_print": { "value": 50.0 } , ,
+        "speed_print": { "value": 50.0 } ,
         "speed_wall_x": { "value": "speed_wall" },
         "speed_travel": { "value": "120.0 if speed_print < 60 else 180.0 if speed_print > 100 else speed_print * 2.2" },
         "speed_layer_0": { "value": 25.0 },