Set line widths equal to nozzle diameter

and remove line width lines from profiles (PP-13)

resources/definitions/ultimaker2_plus.def.json

@@ -35,7 +35,7 @@
             "value": "round(machine_nozzle_size / 1.5, 2)"
         },
         "line_width": {
-            "value": "round(machine_nozzle_size * 0.875, 2)"
+            "value": "machine_nozzle_size"
         },
         "speed_support": {
             "value": "speed_wall_0"

resources/definitions/ultimaker2_plus_connect.def.json

@@ -59,7 +59,7 @@
         "speed_infill": { "value": "speed_print" },
         "speed_wall_x": { "value": "speed_wall" },
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
-        "line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" },
+        "line_width": { "value": "machine_nozzle_size" },
         "optimize_wall_printing_order": { "value": "True" },
         "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" },
         "speed_support": { "value": "speed_wall_0" },

resources/definitions/ultimaker3.def.json

@@ -97,7 +97,7 @@
         "cool_fan_speed_max": { "value": "100" },
         "cool_min_speed": { "value": "5" },
         "infill_before_walls": { "value": "False" },
-        "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" },
+        "infill_line_width": { "value": "line_width" },
         "infill_overlap": { "value": "0" },
         "infill_pattern": { "value": "'triangles'" },
         "infill_wipe_dist": { "value": "0" },
@@ -114,7 +114,7 @@
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
-        "line_width": { "value": "round(machine_nozzle_size * 0.875, 3)" },
+        "line_width": { "value": "machine_nozzle_size" },
         "machine_min_cool_heat_time_window": { "value": "15" },
         "default_material_print_temperature": { "value": "200" },
         "material_print_temperature_layer_0": { "value": "material_print_temperature + 5" },
@@ -165,7 +165,7 @@
         "top_bottom_thickness": { "value": "1" },
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
         "wall_0_inset": { "value": "0" },
-        "wall_line_width_x": { "value": "round(wall_line_width * 0.3 / 0.35, 2)" },
+        "wall_line_width_x": { "value": "wall_line_width" },
         "wall_thickness": { "value": "1" },
         "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }
     }

resources/definitions/ultimaker_s3.def.json

@@ -106,7 +106,7 @@
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
-        "line_width": { "value": "machine_nozzle_size * 0.875" },
+        "line_width": { "value": "machine_nozzle_size" },
         "machine_min_cool_heat_time_window": { "value": "15" },
         "default_material_print_temperature": { "value": "200" },
         "material_standby_temperature": { "value": "100" },

resources/definitions/ultimaker_s5.def.json

@@ -92,7 +92,7 @@
         "cool_fan_speed_max": { "value": "100" },
         "cool_min_speed": { "value": "5" },
         "infill_before_walls": { "value": "False" },
-        "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" },
+        "infill_line_width": { "value": "line_width" },
         "infill_overlap": { "value": "0" },
         "infill_pattern": { "value": "'triangles'" },
         "infill_wipe_dist": { "value": "0" },
@@ -108,7 +108,7 @@
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
-        "line_width": { "value": "machine_nozzle_size * 0.875" },
+        "line_width": { "value": "machine_nozzle_size" },
         "machine_min_cool_heat_time_window": { "value": "15" },
         "default_material_print_temperature": { "value": "200" },
         "material_standby_temperature": { "value": "100" },
@@ -158,7 +158,7 @@
         "travel_avoid_supports": { "value": "True" },
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
         "wall_0_inset": { "value": "0" },
-        "wall_line_width_x": { "value": "round(line_width * 0.3 / 0.35, 2)" },
+        "wall_line_width_x": { "value": "line_width" },
         "wall_thickness": { "value": "1" },
         "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" },
         "meshfix_maximum_deviation": { "value": "layer_height / 4" },

resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg

@@ -21,7 +21,7 @@ speed_layer_0 = 20
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
 infill_sparse_density = 15
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -29,5 +29,5 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
-wall_line_width_x = =line_width
+

resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_abs
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,6 +29,6 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2

resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_abs
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,6 +29,6 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2

resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 

resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 

resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_cpe
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 

resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_cpe
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 

resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 

resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 

resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 

resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 

resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_petg
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 

resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_petg
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 

resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg

@@ -21,7 +21,7 @@ speed_layer_0 = 20
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
 infill_sparse_density = 15
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -29,5 +29,5 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
-wall_line_width_x = =line_width
+

resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_pla
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,6 +29,6 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2

resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_pla
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,6 +29,6 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2

resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg

@@ -21,7 +21,7 @@ speed_layer_0 = 20
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
 infill_sparse_density = 15
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -29,5 +29,5 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
-wall_line_width_x = =line_width
+

resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_tough_pla
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,6 +29,6 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2

resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_tough_pla
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,6 +29,6 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2

resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg

@@ -21,7 +21,7 @@ speed_layer_0 = 20
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
 infill_sparse_density = 15
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -29,5 +29,5 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
-wall_line_width_x = =line_width
+

resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_abs
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_abs
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_cpe
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_cpe
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_petg
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_petg
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg

@@ -21,7 +21,7 @@ speed_layer_0 = 20
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
 infill_sparse_density = 15
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -29,5 +29,5 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
-wall_line_width_x = =line_width
+

resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_pla
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_pla
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg

@@ -21,7 +21,7 @@ speed_layer_0 = 20
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
 infill_sparse_density = 15
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -29,5 +29,5 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
-wall_line_width_x = =line_width
+

resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_tough_pla
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg

@@ -12,7 +12,7 @@ material = generic_tough_pla
 variant = AA 0.4
 
 [values]
-infill_line_width = =line_width
+
 jerk_print = 30
 jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
 jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
 speed_print = 30
 speed_infill = =speed_print
 speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg

@@ -20,7 +20,6 @@ cool_min_speed = 8
 infill_overlap = 5
 infill_sparse_density = 30
 layer_0_z_overlap = 0.22
-line_width = 0.38
 raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8

resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg

@@ -20,7 +20,6 @@ cool_min_speed = 8
 infill_overlap = 5
 infill_sparse_density = 30
 layer_0_z_overlap = 0.22
-line_width = 0.38
 raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8

resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg

@@ -20,7 +20,7 @@ cool_min_speed = 8
 infill_overlap = 5
 infill_sparse_density = 35
 layer_0_z_overlap = 0.22
-line_width = 0.57
+
 raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2

resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg

@@ -20,7 +20,7 @@ cool_min_speed = 8
 infill_overlap = 5
 infill_sparse_density = 35
 layer_0_z_overlap = 0.22
-line_width = 0.57
+
 raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2

resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg

@@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
-infill_line_width = =round(line_width * 0.4 / 0.38, 2)
 infill_overlap = 0
 infill_pattern = cubic
 infill_wipe_dist = 0
@@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1
@@ -66,7 +64,6 @@ support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 travel_avoid_distance = 3
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.38 / 0.38, 2)
 wall_thickness = 0.76
 speed_wall_x = =math.ceil(speed_print * 25 / 25)
 speed_infill = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg

@@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
-infill_line_width = =round(line_width * 0.4 / 0.38, 2)
 infill_overlap = 0
 infill_pattern = cubic
 infill_wipe_dist = 0
@@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1
@@ -66,5 +64,4 @@ support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 travel_avoid_distance = 3
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.38 / 0.38, 2)
 wall_thickness = 0.76

resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg

@@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
-infill_line_width = =round(line_width * 0.6 / 0.57, 2)
 infill_overlap = 0
 infill_pattern = cubic
 infill_wipe_dist = 0
@@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1
@@ -48,7 +46,6 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_prime_speed = 15
 skin_overlap = 10
-skirt_brim_line_width = 0.6
 speed_layer_0 = =speed_print
 speed_prime_tower = =speed_topbottom
 speed_print = 25
@@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.57 / 0.57, 2)
 wall_thickness = 1.14

resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg

@@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
-infill_line_width = =round(line_width * 0.6 / 0.57, 2)
 infill_overlap = 0
 infill_pattern = cubic
 infill_wipe_dist = 0
@@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1
@@ -48,7 +46,6 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_prime_speed = 15
 skin_overlap = 10
-skirt_brim_line_width = 0.6
 speed_layer_0 = =speed_print
 speed_prime_tower = =speed_topbottom
 speed_print = 25
@@ -67,7 +64,6 @@ support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.57 / 0.57, 2)
 wall_thickness = 1.14
 speed_wall_x = =math.ceil(speed_print * 25 / 25)
 speed_infill = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg

@@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
-infill_line_width = =round(line_width * 0.8 / 0.76, 2)
 infill_overlap = 0
 infill_pattern = cubic
 infill_wipe_dist = 0
@@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1
@@ -48,7 +46,6 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_prime_speed = 15
 skin_overlap = 10
-skirt_brim_line_width = 0.8
 speed_layer_0 = =speed_print
 speed_prime_tower = =speed_topbottom
 speed_print = 25
@@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.5
 travel_avoid_distance = 3
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.76 / 0.76, 2)
 wall_thickness = 1.52

resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg

@@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
-infill_line_width = =round(line_width * 0.8 / 0.76, 2)
 infill_overlap = 0
 infill_pattern = cubic
 infill_wipe_dist = 0
@@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1
@@ -48,7 +46,6 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_prime_speed = 15
 skin_overlap = 10
-skirt_brim_line_width = 0.8
 speed_layer_0 = =speed_print
 speed_prime_tower = =speed_topbottom
 speed_print = 25
@@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.5
 travel_avoid_distance = 3
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.76 / 0.76, 2)
 wall_thickness = 1.52

resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg

@@ -19,7 +19,6 @@ cool_fan_speed_min = =cool_fan_speed * 35 / 60
 cool_min_speed = 15
 infill_sparse_density = 10
 layer_0_z_overlap = 0.12
-line_width = 0.57
 raft_airgap = 0.24
 raft_base_line_spacing = 1.2
 raft_base_line_width = 0.6

resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg

@@ -19,7 +19,6 @@ cool_min_speed = 8
 infill_overlap = 5
 infill_sparse_density = 20
 layer_0_z_overlap = 0.22
-line_width = 0.38
 raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8

resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg

@@ -19,7 +19,6 @@ cool_min_speed = 8
 infill_overlap = 5
 infill_sparse_density = 20
 layer_0_z_overlap = 0.22
-line_width = 0.38
 raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8

resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg

@@ -19,7 +19,6 @@ cool_min_speed = 8
 infill_overlap = 5
 infill_sparse_density = 20
 layer_0_z_overlap = 0.22
-line_width = 0.57
 raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2

resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg

@@ -19,7 +19,6 @@ cool_min_speed = 8
 infill_overlap = 5
 infill_sparse_density = 20
 layer_0_z_overlap = 0.22
-line_width = 0.57
 raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg

@@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
-infill_line_width = =round(line_width * 0.4 / 0.38, 2)
 infill_overlap = 0
 infill_pattern = tetrahedral
 infill_wipe_dist = 0
@@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1
@@ -66,7 +64,6 @@ support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 travel_avoid_distance = 3
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.38 / 0.38, 2)
 wall_thickness = 0.76
 speed_wall_x = =math.ceil(speed_print * 25 / 25)
 speed_infill = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg

@@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
-infill_line_width = =round(line_width * 0.4 / 0.38, 2)
 infill_overlap = 0
 infill_pattern = tetrahedral
 infill_wipe_dist = 0
@@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1
@@ -66,5 +64,4 @@ support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 travel_avoid_distance = 3
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.38 / 0.38, 2)
 wall_thickness = 0.76

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg

@@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
-infill_line_width = =round(line_width * 0.6 / 0.57, 2)
 infill_overlap = 0
 infill_pattern = tetrahedral
 infill_wipe_dist = 0
@@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1
@@ -48,7 +46,6 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_prime_speed = 15
 skin_overlap = 10
-skirt_brim_line_width = 0.6
 speed_layer_0 = =speed_print
 speed_prime_tower = =speed_topbottom
 speed_print = 25
@@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.57 / 0.57, 2)
 wall_thickness = 1.14

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg

@@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
-infill_line_width = =round(line_width * 0.6 / 0.57, 2)
 infill_overlap = 0
 infill_pattern = tetrahedral
 infill_wipe_dist = 0
@@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1
@@ -48,7 +46,6 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_prime_speed = 15
 skin_overlap = 10
-skirt_brim_line_width = 0.6
 speed_layer_0 = =speed_print
 speed_prime_tower = =speed_topbottom
 speed_print = 25
@@ -67,7 +64,6 @@ support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.57 / 0.57, 2)
 wall_thickness = 1.14
 speed_wall_x = =math.ceil(speed_print * 25 / 25)
 speed_infill = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg

@@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
-infill_line_width = =round(line_width * 0.8 / 0.76, 2)
 infill_overlap = 0
 infill_pattern = tetrahedral
 infill_wipe_dist = 0
@@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1
@@ -48,7 +46,6 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_prime_speed = 15
 skin_overlap = 10
-skirt_brim_line_width = 0.8
 speed_layer_0 = =speed_print
 speed_prime_tower = =speed_topbottom
 speed_print = 25
@@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.5
 travel_avoid_distance = 3
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.76 / 0.76, 2)
 wall_thickness = 1.52

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg

@@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
-infill_line_width = =round(line_width * 0.8 / 0.76, 2)
 infill_overlap = 0
 infill_pattern = tetrahedral
 infill_wipe_dist = 0
@@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1
@@ -48,7 +46,6 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_prime_speed = 15
 skin_overlap = 10
-skirt_brim_line_width = 0.8
 speed_layer_0 = =speed_print
 speed_prime_tower = =speed_topbottom
 speed_print = 25
@@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.5
 travel_avoid_distance = 3
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.76 / 0.76, 2)
 wall_thickness = 1.52

resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg

@@ -19,7 +19,6 @@ cool_fan_speed_min = =cool_fan_speed
 cool_min_speed = 15
 infill_sparse_density = 10
 layer_0_z_overlap = 0.12
-line_width = 0.57
 raft_airgap = 0.24
 raft_base_line_spacing = 1.2
 raft_base_line_width = 0.6

resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg

@@ -14,7 +14,6 @@ variant = AA 0.25
 [values]
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 12
-infill_line_width = =round(line_width * 0.5 / 0.4, 2)
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
@@ -32,4 +31,3 @@ speed_wall = =math.ceil(speed_print * 30 / 70)
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width

resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg

@@ -19,7 +19,6 @@ cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 5
-infill_line_width = =line_width
 infill_pattern = triangles
 infill_wipe_dist = 0.1
 jerk_enabled = True
@@ -50,5 +49,4 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =line_width
 wall_thickness = 1.2

resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg

@@ -17,12 +17,11 @@ brim_width = 10
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 2.5
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_pattern = tetrahedral
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
-line_width = =machine_nozzle_size * 0.92
 machine_min_cool_heat_time_window = 15
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_final_print_temperature = =material_print_temperature - 10
@@ -53,5 +52,4 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1
 travel_avoid_distance = 3
 wall_0_inset = 0
-wall_line_width_x = =line_width
 wall_thickness = =line_width * 3

resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg

@@ -15,10 +15,8 @@ variant = AA 0.25
 brim_width = 8
 cool_fan_full_at_height = =layer_height_0
 cool_min_speed = 7
-infill_line_width = =line_width
 infill_overlap = 10
 infill_pattern = grid
-line_width = =machine_nozzle_size * 0.92
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -34,6 +32,4 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 top_bottom_thickness = 0.72
 wall_0_inset = 0.015
 wall_0_wipe_dist = 0.25
-wall_line_width = =line_width
-wall_line_width_x= =line_width
 wall_thickness = 0.7

resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg

@@ -14,7 +14,6 @@ variant = AA 0.4
 [values]
 cool_fan_speed_max = 80
 cool_min_speed = 5
-infill_line_width = =round(line_width * 0.35 / 0.35, 2)
 infill_overlap = 0
 infill_pattern = triangles
 infill_wipe_dist = 0

resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg

@@ -14,7 +14,6 @@ variant = AA 0.4
 [values]
 cool_fan_speed_max = 80
 cool_min_speed = 6
-infill_line_width = =round(line_width * 0.35 / 0.35, 2)
 infill_overlap = 0
 infill_pattern = triangles
 infill_wipe_dist = 0

resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg

@@ -14,7 +14,6 @@ variant = AA 0.4
 [values]
 cool_fan_speed_max = 50
 cool_min_speed = 5
-infill_line_width = =round(line_width * 0.35 / 0.35, 2)
 infill_overlap = 0
 infill_pattern = triangles
 infill_wipe_dist = 0

resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg

@@ -14,7 +14,6 @@ variant = AA 0.4
 [values]
 cool_fan_speed_max = 50
 cool_min_speed = 7
-infill_line_width = =round(line_width * 0.35 / 0.35, 2)
 infill_overlap = 0
 infill_pattern = triangles
 infill_wipe_dist = 0

resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg

@@ -15,8 +15,6 @@ variant = AA 0.4
 adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-infill_line_width = =round(line_width * 0.5 / 0.4, 2)
-line_width = =machine_nozzle_size
 material_print_temperature = =default_material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
@@ -33,4 +31,3 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width

resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg

@@ -15,8 +15,6 @@ variant = AA 0.4
 adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-infill_line_width = =round(line_width * 0.5 / 0.4, 2)
-line_width = =machine_nozzle_size
 material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
@@ -33,4 +31,3 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width

resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg

@@ -15,8 +15,6 @@ variant = AA 0.4
 adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 15
-infill_line_width = =round(line_width * 0.5 / 0.4, 2)
-line_width = =machine_nozzle_size
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
@@ -32,4 +30,3 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width

resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg

@@ -15,8 +15,6 @@ variant = AA 0.4
 adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 12
-infill_line_width = =round(line_width * 0.5 / 0.4, 2)
-line_width = =machine_nozzle_size
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
@@ -32,4 +30,3 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width

resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg

@@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 90
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 6
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+
 infill_overlap = 0
 infill_overlap_mm = 0.05
 infill_pattern = triangles
@@ -59,5 +59,4 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
 wall_thickness = 1.2

resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg

@@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 85
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 7
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+
 infill_overlap_mm = 0.05
 infill_pattern = triangles
 infill_wipe_dist = 0.1
@@ -58,5 +58,4 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
 wall_thickness = 1.2

resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg

@@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 8
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+
 infill_overlap = 0
 infill_overlap_mm = 0.05
 infill_pattern = triangles
@@ -59,5 +59,4 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
 wall_thickness = 1.2

resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg

@@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 5
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+
 infill_overlap = 0
 infill_pattern = triangles
 infill_wipe_dist = 0.1
@@ -56,5 +56,4 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
 wall_thickness = 1.2

resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg

@@ -14,7 +14,6 @@ variant = AA 0.4
 [values]
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
-infill_line_width = =round(line_width * 0.42 / 0.35, 2)
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5

resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg

@@ -14,7 +14,6 @@ variant = AA 0.4
 [values]
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
-infill_line_width = =round(line_width * 0.42 / 0.35, 2)
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100

resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg

@@ -15,7 +15,6 @@ variant = AA 0.4
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 10
-infill_line_width = =round(line_width * 0.42 / 0.35, 2)
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5

resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg

@@ -15,7 +15,6 @@ variant = AA 0.4
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 7
-infill_line_width = =round(line_width * 0.42 / 0.35, 2)
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100

resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg

@@ -17,14 +17,13 @@ cool_fan_speed_max = 100
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 7
 cool_min_speed = 2.5
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_overlap = 0
 infill_pattern = tetrahedral
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
 layer_height = 0.2
-line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
@@ -58,5 +57,4 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =line_width
 wall_thickness = =line_width * 3

resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg

@@ -17,14 +17,13 @@ cool_fan_speed_max = 100
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 7
 cool_min_speed = 2.5
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_overlap = 0
 infill_pattern = tetrahedral
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
 layer_height = 0.15
-line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
@@ -58,5 +57,4 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1.1
 wall_0_inset = 0
-wall_line_width_x = =line_width
 wall_thickness = =line_width * 3

resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg

@@ -17,13 +17,12 @@ cool_fan_speed_max = 100
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 7
 cool_min_speed = 2.5
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_overlap = 0
 infill_pattern = tetrahedral
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
-line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
@@ -57,5 +56,4 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1
 wall_0_inset = 0
-wall_line_width_x = =line_width
 wall_thickness = =line_width * 3

resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg

@@ -15,7 +15,6 @@ variant = AA 0.4
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 7
-infill_line_width = =round(line_width * 0.45/0.35,2)
 jerk_print = 25
 jerk_roofing = 1
 layer_height_0 = 0.2
@@ -34,5 +33,4 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 36 / 50)
 speed_wall_0 = =math.ceil(speed_print * 26 / 50)
 top_bottom_thickness = 1.2
-wall_line_width_x = =round(line_width * 0.35/0.35,2)
 wall_thickness = 1.2

resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg

@@ -14,7 +14,6 @@ variant = AA 0.4
 [values]
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
-infill_line_width = =round(line_width * 1.285, 2)
 layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
@@ -27,6 +26,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
 top_bottom_thickness = 1.2
-wall_line_width_x = =round(line_width * 0.35/0.35,2)
 wall_thickness = 1.23
 

resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg

@@ -15,7 +15,6 @@ variant = AA 0.4
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 7
-infill_line_width = =round(line_width * 1.285, 2)
 layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6

resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg

@@ -17,7 +17,7 @@ cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 4
 gradual_infill_step_height = =5 * layer_height
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_overlap = 0
 infill_pattern = cross_3d
 infill_sparse_density = 10
@@ -25,7 +25,6 @@ infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
 layer_height = 0.2
-line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
@@ -58,5 +57,4 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
-wall_line_width_x = =line_width
 wall_thickness = 0.76

resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg

@@ -17,7 +17,7 @@ cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 4
 gradual_infill_step_height = =5 * layer_height
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_overlap = 0
 infill_pattern = cross_3d
 infill_sparse_density = 10
@@ -25,7 +25,6 @@ infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
 layer_height = 0.15
-line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
@@ -59,5 +58,4 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
-wall_line_width_x = =line_width
 wall_thickness = 0.76

resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg

@@ -17,14 +17,13 @@ cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 4
 gradual_infill_step_height = =5 * layer_height
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_overlap = 0
 infill_pattern = cross_3d
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
-line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
@@ -56,5 +55,4 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
-wall_line_width_x = =line_width
 wall_thickness = 0.76

resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg

@@ -12,7 +12,6 @@ material = generic_abs
 variant = AA 0.8
 
 [values]
-line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature + 25
 material_standby_temperature = 100
 speed_print = 50

resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg

@@ -13,7 +13,6 @@ variant = AA 0.8
 
 [values]
 layer_height = 0.4
-line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature + 30
 material_standby_temperature = 100
 speed_print = 50

resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg

@@ -13,7 +13,6 @@ variant = AA 0.8
 
 [values]
 layer_height = 0.3
-line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature + 27
 material_standby_temperature = 100
 speed_print = 50

resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg

@@ -15,8 +15,6 @@ is_experimental = True
 [values]
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
-
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 10
@@ -33,6 +31,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.6 / 0.7, 2)
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2

resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg

@@ -15,9 +15,7 @@ is_experimental = True
 [values]
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
-
 layer_height = 0.4
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 5
@@ -34,6 +32,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.6 / 0.7, 2)
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2

resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg

@@ -17,7 +17,6 @@ brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
 
 layer_height = 0.3
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 7
@@ -34,6 +33,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.6 / 0.7, 2)
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2