diff --git a/cura/BuildVolume.py b/cura/BuildVolume.py
index 045156dcce..2bfa654d4f 100755
--- a/cura/BuildVolume.py
+++ b/cura/BuildVolume.py
@@ -813,7 +813,7 @@ class BuildVolume(SceneNode):
             prime_tower_areas = self._computeDisallowedAreasPrinted(used_extruders)
             for extruder_id in prime_tower_areas:
                 for area_index, prime_tower_area in enumerate(prime_tower_areas[extruder_id]):
-                    for area in result_areas[extruder_id]:
+                    for area in result_areas_no_brim[extruder_id]:
                         if prime_tower_area.intersectsPolygon(area) is not None:
                             prime_tower_collision = True
                             break
@@ -860,13 +860,24 @@ class BuildVolume(SceneNode):
             machine_depth = self._global_container_stack.getProperty("machine_depth", "value")
             prime_tower_x = self._global_container_stack.getProperty("prime_tower_position_x", "value")
             prime_tower_y = - self._global_container_stack.getProperty("prime_tower_position_y", "value")
+            prime_tower_brim_enable = self._global_container_stack.getProperty("prime_tower_brim_enable", "value")
+            prime_tower_base_size = self._global_container_stack.getProperty("prime_tower_base_size", "value")
+            prime_tower_base_height = self._global_container_stack.getProperty("prime_tower_base_height", "value")
+            adhesion_type = self._global_container_stack.getProperty("adhesion_type", "value")
+
             if not self._global_container_stack.getProperty("machine_center_is_zero", "value"):
                 prime_tower_x = prime_tower_x - machine_width / 2 #Offset by half machine_width and _depth to put the origin in the front-left.
                 prime_tower_y = prime_tower_y + machine_depth / 2
 
             radius = prime_tower_size / 2
-            prime_tower_area = Polygon.approximatedCircle(radius, num_segments = 24)
-            prime_tower_area = prime_tower_area.translate(prime_tower_x - radius, prime_tower_y - radius)
+            delta_x = -radius
+            delta_y = -radius
+
+            if prime_tower_base_size > 0 and ((prime_tower_brim_enable and prime_tower_base_height > 0) or adhesion_type == "raft"):
+                radius += prime_tower_base_size
+
+            prime_tower_area = Polygon.approximatedCircle(radius, num_segments = 32)
+            prime_tower_area = prime_tower_area.translate(prime_tower_x + delta_x, prime_tower_y + delta_y)
 
             prime_tower_area = prime_tower_area.getMinkowskiHull(Polygon.approximatedCircle(0))
             for extruder in used_extruders:
@@ -1171,7 +1182,7 @@ class BuildVolume(SceneNode):
     _raft_settings = ["adhesion_type", "raft_base_thickness", "raft_interface_layers", "raft_interface_thickness", "raft_surface_layers", "raft_surface_thickness", "raft_airgap", "layer_0_z_overlap"]
     _extra_z_settings = ["retraction_hop_enabled", "retraction_hop"]
     _prime_settings = ["extruder_prime_pos_x", "extruder_prime_pos_y", "prime_blob_enable"]
-    _tower_settings = ["prime_tower_enable", "prime_tower_size", "prime_tower_position_x", "prime_tower_position_y", "prime_tower_brim_enable"]
+    _tower_settings = ["prime_tower_enable", "prime_tower_size", "prime_tower_position_x", "prime_tower_position_y", "prime_tower_brim_enable", "prime_tower_base_size", "prime_tower_base_height"]
     _ooze_shield_settings = ["ooze_shield_enabled", "ooze_shield_dist"]
     _distance_settings = ["infill_wipe_dist", "travel_avoid_distance", "support_offset", "support_enable", "travel_avoid_other_parts", "travel_avoid_supports", "wall_line_count", "wall_line_width_0", "wall_line_width_x"]
     _extruder_settings = ["support_enable", "support_bottom_enable", "support_roof_enable", "support_infill_extruder_nr", "support_extruder_nr_layer_0", "support_bottom_extruder_nr", "support_roof_extruder_nr", "brim_line_count", "skirt_brim_extruder_nr", "raft_base_extruder_nr", "raft_interface_extruder_nr", "raft_surface_extruder_nr", "adhesion_type"] #Settings that can affect which extruders are used.
diff --git a/resources/definitions/Mark2_for_Ultimaker2.def.json b/resources/definitions/Mark2_for_Ultimaker2.def.json
index 305a9b18da..5eda5ca6f2 100644
--- a/resources/definitions/Mark2_for_Ultimaker2.def.json
+++ b/resources/definitions/Mark2_for_Ultimaker2.def.json
@@ -137,8 +137,6 @@
         "machine_start_gcode": { "value": "\"\"  if machine_gcode_flavor == \"UltiGCode\" else \"G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nM200 D0 T0 ;reset filament diameter\\nM200 D0 T1\\nG28 Z0; home all\\nG28 X0 Y0\\nG0 Z20 F2400 ;move the platform to 20mm\\nG92 E0\\nM190 S{material_bed_temperature_layer_0}\\nM109 T0 S{material_standby_temperature, 0}\\nM109 T1 S{material_print_temperature_layer_0, 1}\\nM104 T0 S{material_print_temperature_layer_0, 0}\\nT1 ; move to the 2th head\\nG0 Z20 F2400\\nG92 E-7.0 ;prime distance\\nG1 E0 F45 ;purge nozzle\\nG1 E-5.1 F1500 ; retract\\nG1 X90 Z0.01 F5000 ; move away from the prime poop\\nG1 X50 F9000\\nG0 Z20 F2400\\nT0 ; move to the first head\\nM104 T1 S{material_standby_temperature, 1}\\nG0 Z20 F2400\\nM104 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\\nG92 E-7.0\\nG1 E0 F45 ;purge nozzle\\nG1 X60 Z0.01 F5000 ; move away from the prime poop\\nG1 X20 F9000\\nM400 ;finish all moves\\nG92 E0\\n;end of startup sequence\\n\"" },
         "machine_use_extruder_offset_to_offset_coords": { "default_value": false },
         "machine_width": { "default_value": 223 },
-        "prime_tower_position_x": { "value": "185" },
-        "prime_tower_position_y": { "value": "160" },
         "retraction_amount": { "default_value": 5.1 },
         "retraction_speed": { "default_value": 25 },
         "speed_support": { "value": "speed_wall_0" },
diff --git a/resources/definitions/SV02.def.json b/resources/definitions/SV02.def.json
index 728a6c6242..45b2572242 100644
--- a/resources/definitions/SV02.def.json
+++ b/resources/definitions/SV02.def.json
@@ -60,8 +60,6 @@
         "material_diameter": { "default_value": 1.75 },
         "material_initial_print_temperature": { "value": "material_print_temperature" },
         "prime_tower_min_volume": { "value": "((resolveOrValue('layer_height'))/2" },
-        "prime_tower_position_x": { "value": "240" },
-        "prime_tower_position_y": { "value": "190" },
         "prime_tower_size": { "value": "30" },
         "prime_tower_wipe_enabled": { "default_value": true },
         "retraction_amount": { "default_value": 5 },
diff --git a/resources/definitions/atmat_signal_pro_base.def.json b/resources/definitions/atmat_signal_pro_base.def.json
index 7d14fa6576..f19dc8920d 100644
--- a/resources/definitions/atmat_signal_pro_base.def.json
+++ b/resources/definitions/atmat_signal_pro_base.def.json
@@ -111,8 +111,6 @@
         "minimum_polygon_circumference": { "value": "0.2" },
         "optimize_wall_printing_order": { "value": "True" },
         "prime_tower_enable": { "value": "True" },
-        "prime_tower_position_x": { "value": "270" },
-        "prime_tower_position_y": { "value": "270" },
         "retraction_amount": { "value": "1" },
         "retraction_combing": { "value": "'noskin'" },
         "retraction_combing_max_distance": { "value": "10" },
diff --git a/resources/definitions/bibo2_dual.def.json b/resources/definitions/bibo2_dual.def.json
index 344fdbf3b9..c8da4897ea 100644
--- a/resources/definitions/bibo2_dual.def.json
+++ b/resources/definitions/bibo2_dual.def.json
@@ -41,8 +41,6 @@
         "machine_start_gcode": { "default_value": "M104 T0 165\nM104 T1 165\nM109 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z2.0 F400 ;move the platform down 2mm\nT0\nG92 E0\nG28\nG1 Y0 F1200 E0\nG92 E0\nT{initial_extruder_nr}\nM117 BIBO Printing..." },
         "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
         "machine_width": { "default_value": 214 },
-        "prime_tower_position_x": { "value": "50" },
-        "prime_tower_position_y": { "value": "50" },
         "speed_print": { "default_value": 40 }
     }
 }
\ No newline at end of file
diff --git a/resources/definitions/builder_premium_large.def.json b/resources/definitions/builder_premium_large.def.json
index 1ba55471d3..f3bfa59272 100644
--- a/resources/definitions/builder_premium_large.def.json
+++ b/resources/definitions/builder_premium_large.def.json
@@ -81,8 +81,6 @@
         "material_standby_temperature": { "value": "material_print_temperature" },
         "prime_blob_enable": { "enabled": true },
         "prime_tower_min_volume": { "default_value": 50 },
-        "prime_tower_position_x": { "value": "175" },
-        "prime_tower_position_y": { "value": "178" },
         "prime_tower_wipe_enabled": { "default_value": false },
         "retraction_amount": { "default_value": 3 },
         "retraction_speed": { "default_value": 15 },
diff --git a/resources/definitions/builder_premium_medium.def.json b/resources/definitions/builder_premium_medium.def.json
index b8a3d8578d..1d68596020 100644
--- a/resources/definitions/builder_premium_medium.def.json
+++ b/resources/definitions/builder_premium_medium.def.json
@@ -81,8 +81,6 @@
         "material_standby_temperature": { "value": "material_print_temperature" },
         "prime_blob_enable": { "enabled": true },
         "prime_tower_min_volume": { "default_value": 50 },
-        "prime_tower_position_x": { "value": "175" },
-        "prime_tower_position_y": { "value": "178" },
         "prime_tower_wipe_enabled": { "default_value": false },
         "retraction_amount": { "default_value": 3 },
         "retraction_speed": { "default_value": 15 },
diff --git a/resources/definitions/builder_premium_small.def.json b/resources/definitions/builder_premium_small.def.json
index ab773a45d2..b59b7fadcf 100644
--- a/resources/definitions/builder_premium_small.def.json
+++ b/resources/definitions/builder_premium_small.def.json
@@ -80,8 +80,6 @@
         "material_standby_temperature": { "value": "material_print_temperature" },
         "prime_blob_enable": { "enabled": true },
         "prime_tower_min_volume": { "default_value": 50 },
-        "prime_tower_position_x": { "value": "175" },
-        "prime_tower_position_y": { "value": "178" },
         "prime_tower_wipe_enabled": { "default_value": false },
         "retraction_amount": { "default_value": 3 },
         "retraction_speed": { "default_value": 15 },
diff --git a/resources/definitions/cartesio.def.json b/resources/definitions/cartesio.def.json
index db725f91ed..eadef63857 100644
--- a/resources/definitions/cartesio.def.json
+++ b/resources/definitions/cartesio.def.json
@@ -66,8 +66,6 @@
         "optimize_wall_printing_order": { "default_value": true },
         "prime_blob_enable": { "default_value": false },
         "prime_tower_min_volume": { "value": "0.7" },
-        "prime_tower_position_x": { "value": "125" },
-        "prime_tower_position_y": { "value": "70" },
         "prime_tower_size": { "value": 24.0 },
         "retraction_extra_prime_amount": { "minimum_value_warning": "-2.0" }
     }
diff --git a/resources/definitions/deltacomb_base.def.json b/resources/definitions/deltacomb_base.def.json
index a4634bfcf1..7ffd317830 100644
--- a/resources/definitions/deltacomb_base.def.json
+++ b/resources/definitions/deltacomb_base.def.json
@@ -55,8 +55,6 @@
         "machine_shape": { "default_value": "elliptic" },
         "machine_start_gcode": { "default_value": ";---------------------------------------\n;Deltacomb start script\n;---------------------------------------\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nG28 ;Home all axes (max endstops)\nM420 S1; Bed Level Enable\nG92 E0 ;zero the extruded length\nG1 Z15.0 F9000 ;move to the platform down 15mm\nG1 F9000\n\n;Put printing message on LCD screen\nM117 In stampa...\nM140 S{print_bed_temperature} ;set the target bed temperature\n;---------------------------------------" },
         "prime_tower_brim_enable": { "value": false },
-        "prime_tower_position_x": { "value": "prime_tower_size / 2" },
-        "prime_tower_position_y": { "value": "machine_depth / 2 - prime_tower_size - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' or (prime_tower_brim_enable and adhesion_type != 'raft') else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" },
         "prime_tower_size": { "value": "math.sqrt(extruders_enabled_count * prime_tower_min_volume / layer_height / math.pi) * 2" },
         "retraction_amount": { "default_value": 3.5 },
         "retraction_combing": { "value": "'noskin'" },
diff --git a/resources/definitions/dxu.def.json b/resources/definitions/dxu.def.json
index 8513dd5f8e..bb61db1686 100644
--- a/resources/definitions/dxu.def.json
+++ b/resources/definitions/dxu.def.json
@@ -131,8 +131,6 @@
         "machine_width": { "default_value": 238 },
         "material_adhesion_tendency": { "enabled": true },
         "material_diameter": { "default_value": 1.75 },
-        "prime_tower_position_x": { "value": "180" },
-        "prime_tower_position_y": { "value": "160" },
         "retraction_amount": { "default_value": 6.5 },
         "retraction_speed": { "default_value": 25 },
         "speed_support": { "value": "speed_wall_0" },
diff --git a/resources/definitions/elegoo_base.def.json b/resources/definitions/elegoo_base.def.json
index c54a388806..fede962748 100644
--- a/resources/definitions/elegoo_base.def.json
+++ b/resources/definitions/elegoo_base.def.json
@@ -71,7 +71,7 @@
         "minimum_interface_area": { "default_value": 10 },
         "minimum_support_area": { "value": "3 if support_structure == 'normal' else 0" },
         "optimize_wall_printing_order": { "default_value": true },
-        "prime_tower_brim_enable": { "default_value": true },
+        "prime_tower_brim_enable": { "value": true },
         "prime_tower_min_volume": { "value": "(layer_height) * (prime_tower_size / 2)**2 * 3 * 0.5 " },
         "prime_tower_size": { "default_value": 30 },
         "prime_tower_wipe_enabled": { "default_value": false },
diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json
index a74abaa8ce..b6e6a027e9 100644
--- a/resources/definitions/fdmprinter.def.json
+++ b/resources/definitions/fdmprinter.def.json
@@ -886,7 +886,7 @@
                             "default_value": 0.4,
                             "type": "float",
                             "value": "line_width",
-                            "enabled": "resolveOrValue('adhesion_type') == 'skirt' or resolveOrValue('adhesion_type') == 'brim' or resolveOrValue('prime_tower_brim_enable') or resolveOrValue('draft_shield_enabled') or resolveOrValue('ooze_shield_enabled')",
+                            "enabled": "resolveOrValue('adhesion_type') == 'skirt' or resolveOrValue('adhesion_type') == 'brim' or resolveOrValue('draft_shield_enabled') or resolveOrValue('ooze_shield_enabled')",
                             "settable_per_mesh": false,
                             "settable_per_extruder": true
                         },
@@ -5895,7 +5895,7 @@
                     "type": "optional_extruder",
                     "default_value": "-1",
                     "value": "int(defaultExtruderPosition()) if resolveOrValue('adhesion_type') == 'raft' else -1",
-                    "enabled": "extruders_enabled_count > 1 and (resolveOrValue('adhesion_type') != 'none' or resolveOrValue('prime_tower_brim_enable'))",
+                    "enabled": "extruders_enabled_count > 1 and (resolveOrValue('adhesion_type') != 'none')",
                     "resolve": "max(extruderValues('adhesion_extruder_nr'))",
                     "settable_per_mesh": false,
                     "settable_per_extruder": false,
@@ -5908,7 +5908,7 @@
                             "type": "optional_extruder",
                             "default_value": "-1",
                             "value": "adhesion_extruder_nr",
-                            "enabled": "extruders_enabled_count > 1 and (resolveOrValue('adhesion_type') in ['skirt', 'brim'] or resolveOrValue('prime_tower_brim_enable'))",
+                            "enabled": "extruders_enabled_count > 1 and (resolveOrValue('adhesion_type') in ['skirt', 'brim'])",
                             "resolve": "max(extruderValues('skirt_brim_extruder_nr'))",
                             "settable_per_mesh": false,
                             "settable_per_extruder": false
@@ -6005,7 +6005,7 @@
                     "minimum_value": "0",
                     "minimum_value_warning": "25",
                     "maximum_value_warning": "2500",
-                    "enabled": "resolveOrValue('adhesion_type') == 'skirt' or resolveOrValue('adhesion_type') == 'brim' or resolveOrValue('prime_tower_brim_enable')",
+                    "enabled": "resolveOrValue('adhesion_type') == 'skirt' or resolveOrValue('adhesion_type') == 'brim'",
                     "limit_to_extruder": "skirt_brim_extruder_nr",
                     "settable_per_mesh": false,
                     "settable_per_extruder": true
@@ -6019,7 +6019,7 @@
                     "default_value": 8.0,
                     "minimum_value": "0.0",
                     "maximum_value_warning": "50.0",
-                    "enabled": "resolveOrValue('adhesion_type') == 'brim' or resolveOrValue('prime_tower_brim_enable')",
+                    "enabled": "resolveOrValue('adhesion_type') == 'brim'",
                     "limit_to_extruder": "skirt_brim_extruder_nr",
                     "settable_per_mesh": false,
                     "settable_per_extruder": true,
@@ -6034,7 +6034,7 @@
                             "minimum_value": "0",
                             "maximum_value_warning": "50 / skirt_brim_line_width",
                             "value": "math.ceil(brim_width / (skirt_brim_line_width * initial_layer_line_width_factor / 100.0))",
-                            "enabled": "resolveOrValue('adhesion_type') == 'brim' or resolveOrValue('prime_tower_brim_enable')",
+                            "enabled": "resolveOrValue('adhesion_type') == 'brim'",
                             "limit_to_extruder": "skirt_brim_extruder_nr",
                             "settable_per_mesh": false,
                             "settable_per_extruder": true
@@ -6641,9 +6641,9 @@
                     "unit": "mm",
                     "enabled": "resolveOrValue('prime_tower_enable')",
                     "default_value": 200,
-                    "value": "machine_width - max(extruderValue(skirt_brim_extruder_nr, 'brim_width') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' or (prime_tower_brim_enable and adhesion_type != 'raft') else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - max(map(abs, extruderValues('machine_nozzle_offset_x'))) - 1",
-                    "maximum_value": "machine_width / 2 if machine_center_is_zero else machine_width",
-                    "minimum_value": "resolveOrValue('prime_tower_size') - machine_width / 2 if machine_center_is_zero else resolveOrValue('prime_tower_size')",
+                    "value": "(resolveOrValue('machine_width') / 2 + resolveOrValue('prime_tower_size') / 2) if resolveOrValue('machine_shape') == 'elliptic' else (resolveOrValue('machine_width') - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_x'))), 1)) - (resolveOrValue('machine_width') / 2 if resolveOrValue('machine_center_is_zero') else 0)",
+                    "maximum_value": "(machine_width / 2 if machine_center_is_zero else machine_width) - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0)",
+                    "minimum_value": "resolveOrValue('prime_tower_size') + (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - (machine_width / 2 if machine_center_is_zero else 0)",
                     "settable_per_mesh": false,
                     "settable_per_extruder": false
                 },
@@ -6655,9 +6655,9 @@
                     "unit": "mm",
                     "enabled": "resolveOrValue('prime_tower_enable')",
                     "default_value": 200,
-                    "value": "machine_depth - prime_tower_size - max(extruderValue(skirt_brim_extruder_nr, 'brim_width') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' or (prime_tower_brim_enable and adhesion_type != 'raft') else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - max(map(abs, extruderValues('machine_nozzle_offset_y'))) - 3",
-                    "maximum_value": "machine_depth / 2 - resolveOrValue('prime_tower_size') if machine_center_is_zero else machine_depth - resolveOrValue('prime_tower_size')",
-                    "minimum_value": "machine_depth / -2 if machine_center_is_zero else 0",
+                    "value": "machine_depth - prime_tower_size - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_y'))), 1) - (resolveOrValue('machine_depth') / 2 if resolveOrValue('machine_center_is_zero') else 0)",
+                    "maximum_value": "(machine_depth / 2 - resolveOrValue('prime_tower_size') if machine_center_is_zero else machine_depth - resolveOrValue('prime_tower_size')) - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0)",
+                    "minimum_value": "(machine_depth / -2 if machine_center_is_zero else 0) + (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0)",
                     "settable_per_mesh": false,
                     "settable_per_extruder": false
                 },
@@ -6673,15 +6673,55 @@
                 },
                 "prime_tower_brim_enable":
                 {
-                    "label": "Prime Tower Brim",
-                    "description": "Prime-towers might need the extra adhesion afforded by a brim even if the model doesn't. Presently can't be used with the 'Raft' adhesion-type.",
+                    "value": "resolveOrValue('adhesion_type') in ['raft', 'brim']",
+                    "label": "Prime Tower Base",
+                    "description": "Prime-towers might need the extra adhesion afforded by a brim or raft, even if the model doesn't.",
                     "type": "bool",
-                    "enabled": "resolveOrValue('prime_tower_enable') and (resolveOrValue('adhesion_type') != 'raft')",
-                    "resolve": "resolveOrValue('prime_tower_enable') and (resolveOrValue('adhesion_type') in ('none', 'skirt', 'brim'))",
+                    "enabled": "resolveOrValue('prime_tower_enable') and resolveOrValue('adhesion_type') != 'raft'",
                     "default_value": false,
                     "settable_per_mesh": false,
                     "settable_per_extruder": false
                 },
+                "prime_tower_base_size":
+                {
+                    "value": "resolveOrValue('raft_margin') if resolveOrValue('adhesion_type') == 'raft' else resolveOrValue('brim_width')",
+                    "label": "Prime Tower Base Size",
+                    "description": "The width of the prime tower base.",
+                    "type": "float",
+                    "unit": "mm",
+                    "enabled": "resolveOrValue('prime_tower_enable') and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')",
+                    "default_value": "resolveOrValue('brim_width')",
+                    "minimum_value": "0",
+                    "maximum_value": "min(0.5 * machine_width, 0.5 * machine_depth)",
+                    "settable_per_mesh": false,
+                    "settable_per_extruder": false
+                },
+                "prime_tower_base_height":
+                {
+                    "value": "resolveOrValue('layer_height')",
+                    "label": "Prime Tower Base Height",
+                    "description": "The height of the prime tower base.",
+                    "type": "float",
+                    "unit": "mm",
+                    "enabled": "resolveOrValue('prime_tower_enable') and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')",
+                    "default_value": 0,
+                    "minimum_value": "0",
+                    "maximum_value": "machine_height",
+                    "settable_per_mesh": false,
+                    "settable_per_extruder": false
+                },
+                "prime_tower_base_curve_magnitude":
+                {
+                    "label": "Prime Tower Base Curve Magnitude",
+                    "description": "The magnitude factor used for the curve of the prime tower foot.",
+                    "type": "float",
+                    "enabled": "resolveOrValue('prime_tower_enable') and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')",
+                    "default_value": 4,
+                    "minimum_value": "0",
+                    "maximum_value": "10",
+                    "settable_per_mesh": false,
+                    "settable_per_extruder": false
+                },
                 "ooze_shield_enabled":
                 {
                     "label": "Enable Ooze Shield",
diff --git a/resources/definitions/felixpro2dual.def.json b/resources/definitions/felixpro2dual.def.json
index fd621f6073..316891224e 100644
--- a/resources/definitions/felixpro2dual.def.json
+++ b/resources/definitions/felixpro2dual.def.json
@@ -56,8 +56,6 @@
             "default_value": 110,
             "value": "material_flow * 1.1"
         },
-        "prime_tower_position_x": { "value": "250" },
-        "prime_tower_position_y": { "value": "200" },
         "retraction_amount": { "default_value": 1 },
         "retraction_speed": { "default_value": 50 },
         "skirt_brim_minimal_length": { "default_value": 130 },
diff --git a/resources/definitions/geeetech_A30M.def.json b/resources/definitions/geeetech_A30M.def.json
index 8b6e6a703b..864ad27086 100644
--- a/resources/definitions/geeetech_A30M.def.json
+++ b/resources/definitions/geeetech_A30M.def.json
@@ -30,8 +30,6 @@
         "machine_height": { "default_value": 420 },
         "machine_name": { "default_value": "Geeetech A30M" },
         "machine_start_gcode": { "default_value": ";Geeetech A30M Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
-        "machine_width": { "default_value": 320 },
-        "prime_tower_position_x": { "value": 290 },
-        "prime_tower_position_y": { "value": 260 }
+        "machine_width": { "default_value": 320 }
     }
 }
\ No newline at end of file
diff --git a/resources/definitions/geeetech_A30T.def.json b/resources/definitions/geeetech_A30T.def.json
index 610ee35fa4..283902ae85 100644
--- a/resources/definitions/geeetech_A30T.def.json
+++ b/resources/definitions/geeetech_A30T.def.json
@@ -31,8 +31,6 @@
         "machine_height": { "default_value": 420 },
         "machine_name": { "default_value": "Geeetech A30T" },
         "machine_start_gcode": { "default_value": ";Geeetech A30T Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
-        "machine_width": { "default_value": 320 },
-        "prime_tower_position_x": { "value": 290 },
-        "prime_tower_position_y": { "value": 260 }
+        "machine_width": { "default_value": 320 }
     }
 }
\ No newline at end of file
diff --git a/resources/definitions/geeetech_I3ProC.def.json b/resources/definitions/geeetech_I3ProC.def.json
index f05185e5ba..eabb4bd61c 100644
--- a/resources/definitions/geeetech_I3ProC.def.json
+++ b/resources/definitions/geeetech_I3ProC.def.json
@@ -31,8 +31,6 @@
         "machine_name": { "default_value": "Geeetech I3ProC" },
         "machine_start_gcode": { "default_value": ";Geeetech I3ProC Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y10 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y180.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y180.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y10 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
         "machine_width": { "default_value": 200 },
-        "prime_tower_position_x": { "value": 170 },
-        "prime_tower_position_y": { "value": 140 },
         "retraction_amount": { "value": 2 }
     }
 }
\ No newline at end of file
diff --git a/resources/definitions/geeetech_MizarM.def.json b/resources/definitions/geeetech_MizarM.def.json
index d4182ebb62..b681dda657 100644
--- a/resources/definitions/geeetech_MizarM.def.json
+++ b/resources/definitions/geeetech_MizarM.def.json
@@ -31,8 +31,6 @@
         "machine_name": { "default_value": "Geeetech MizarM" },
         "machine_start_gcode": { "default_value": ";Official open-source firmware for MizarM: https://github.com/Geeetech3D/Mizar-M \n\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
         "machine_width": { "default_value": 255 },
-        "material_standby_temperature": { "value": 200 },
-        "prime_tower_position_x": { "value": 225 },
-        "prime_tower_position_y": { "value": 195 }
+        "material_standby_temperature": { "value": 200 }
     }
 }
\ No newline at end of file
diff --git a/resources/definitions/hms434.def.json b/resources/definitions/hms434.def.json
index 5250df5d73..0972dcdb34 100644
--- a/resources/definitions/hms434.def.json
+++ b/resources/definitions/hms434.def.json
@@ -137,8 +137,6 @@
         "minimum_polygon_circumference": { "value": 0.05 },
         "optimize_wall_printing_order": { "default_value": true },
         "prime_blob_enable": { "default_value": false },
-        "prime_tower_position_x": { "value": 125 },
-        "prime_tower_position_y": { "value": 70 },
         "prime_tower_size": { "value": 20.6 },
         "retract_at_layer_change": { "value": false },
         "retraction_combing": { "value": "'off'" },
diff --git a/resources/definitions/leapfrog_bolt_pro.def.json b/resources/definitions/leapfrog_bolt_pro.def.json
index c880eef16c..e4a13217e5 100644
--- a/resources/definitions/leapfrog_bolt_pro.def.json
+++ b/resources/definitions/leapfrog_bolt_pro.def.json
@@ -81,8 +81,6 @@
         "material_initial_print_temperature": { "value": "default_material_print_temperature" },
         "material_standby_temperature": { "enabled": false },
         "prime_tower_enable": { "resolve": "extruders_enabled_count > 1" },
-        "prime_tower_position_x": { "value": "169" },
-        "prime_tower_position_y": { "value": "25" },
         "retraction_amount": { "default_value": 2 },
         "retraction_combing": { "value": "'all'" },
         "skirt_line_count": { "default_value": 3 },
diff --git a/resources/definitions/lnl3d_base.def.json b/resources/definitions/lnl3d_base.def.json
index 7130bff845..317121a214 100644
--- a/resources/definitions/lnl3d_base.def.json
+++ b/resources/definitions/lnl3d_base.def.json
@@ -67,7 +67,7 @@
         "minimum_interface_area": { "value": 10 },
         "minimum_support_area": { "value": "2 if support_structure == 'normal' else 0" },
         "optimize_wall_printing_order": { "value": "True" },
-        "prime_tower_brim_enable": { "default_value": true },
+        "prime_tower_brim_enable": { "value": true },
         "prime_tower_wipe_enabled": { "default_value": false },
         "raft_airgap": { "default_value": 0.2 },
         "raft_margin": { "default_value": 2 },
diff --git a/resources/definitions/lnl3d_d3.def.json b/resources/definitions/lnl3d_d3.def.json
index 52e8042306..a678be9b1b 100755
--- a/resources/definitions/lnl3d_d3.def.json
+++ b/resources/definitions/lnl3d_d3.def.json
@@ -17,8 +17,6 @@
         "machine_depth": { "default_value": 300 },
         "machine_height": { "default_value": 350 },
         "machine_name": { "default_value": "LNL3D D3" },
-        "machine_width": { "default_value": 300 },
-        "prime_tower_position_x": { "value": "155" },
-        "prime_tower_position_y": { "value": "155" }
+        "machine_width": { "default_value": 300 }
     }
 }
\ No newline at end of file
diff --git a/resources/definitions/lnl3d_d3_vulcan.def.json b/resources/definitions/lnl3d_d3_vulcan.def.json
index f81cae81c5..05ea23d7ab 100755
--- a/resources/definitions/lnl3d_d3_vulcan.def.json
+++ b/resources/definitions/lnl3d_d3_vulcan.def.json
@@ -17,8 +17,6 @@
         "machine_depth": { "default_value": 300 },
         "machine_height": { "default_value": 320 },
         "machine_name": { "default_value": "LNL3D D3 Vulcan" },
-        "machine_width": { "default_value": 295 },
-        "prime_tower_position_x": { "value": "155" },
-        "prime_tower_position_y": { "value": "155" }
+        "machine_width": { "default_value": 295 }
     }
 }
\ No newline at end of file
diff --git a/resources/definitions/lnl3d_d5.def.json b/resources/definitions/lnl3d_d5.def.json
index 535341166f..7b7b6d9755 100755
--- a/resources/definitions/lnl3d_d5.def.json
+++ b/resources/definitions/lnl3d_d5.def.json
@@ -17,8 +17,6 @@
         "machine_depth": { "default_value": 500 },
         "machine_height": { "default_value": 600 },
         "machine_name": { "default_value": "LNL3D D5" },
-        "machine_width": { "default_value": 500 },
-        "prime_tower_position_x": { "value": "155" },
-        "prime_tower_position_y": { "value": "155" }
+        "machine_width": { "default_value": 500 }
     }
 }
\ No newline at end of file
diff --git a/resources/definitions/lnl3d_d6.def.json b/resources/definitions/lnl3d_d6.def.json
index b6f99a13ae..4575dc8fdc 100644
--- a/resources/definitions/lnl3d_d6.def.json
+++ b/resources/definitions/lnl3d_d6.def.json
@@ -17,8 +17,6 @@
         "machine_depth": { "default_value": 600 },
         "machine_height": { "default_value": 600 },
         "machine_name": { "default_value": "LNL3D D6" },
-        "machine_width": { "default_value": 600 },
-        "prime_tower_position_x": { "value": "155" },
-        "prime_tower_position_y": { "value": "155" }
+        "machine_width": { "default_value": 600 }
     }
 }
\ No newline at end of file
diff --git a/resources/definitions/lotmaxx_sc60.def.json b/resources/definitions/lotmaxx_sc60.def.json
index 25dc7f5ae8..f4ce358be1 100644
--- a/resources/definitions/lotmaxx_sc60.def.json
+++ b/resources/definitions/lotmaxx_sc60.def.json
@@ -46,8 +46,6 @@
         "optimize_wall_printing_order": { "value": true },
         "prime_tower_enable": { "value": true },
         "prime_tower_min_volume": { "value": 30 },
-        "prime_tower_position_x": { "value": 50 },
-        "prime_tower_position_y": { "value": 50 },
         "retract_at_layer_change": { "value": false },
         "retraction_amount": { "value": 4.5 },
         "roofing_layer_count": { "value": 1 },
diff --git a/resources/definitions/makeit_pro_l.def.json b/resources/definitions/makeit_pro_l.def.json
index dfba300698..38087c9b6b 100644
--- a/resources/definitions/makeit_pro_l.def.json
+++ b/resources/definitions/makeit_pro_l.def.json
@@ -43,8 +43,6 @@
         "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG28 ;home\nG1 F200 E30 ;extrude 30 mm of feed stock\nG92 E0 ;zero the extruded length\nG1 E-5 ;retract 5 mm\nG28 SC ;Do homeing, clean nozzles and let printer to know that printing started\nG92 X-6 ;Sets Curas checker board to match printers heated bed coordinates\nG1 F{speed_travel}\nM117 Printing..." },
         "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
         "machine_width": { "default_value": 305 },
-        "prime_tower_position_x": { "value": "185" },
-        "prime_tower_position_y": { "value": "160" },
         "print_sequence": { "enabled": true },
         "retraction_amount": { "default_value": 6 },
         "retraction_speed": { "default_value": 180 },
diff --git a/resources/definitions/makeit_pro_m.def.json b/resources/definitions/makeit_pro_m.def.json
index 7b42c3acaf..218d1b553c 100644
--- a/resources/definitions/makeit_pro_m.def.json
+++ b/resources/definitions/makeit_pro_m.def.json
@@ -42,8 +42,6 @@
         "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG28 ;home\nG1 F200 E30 ;extrude 30 mm of feed stock\nG92 E0 ;zero the extruded length\nG1 E-5 ;retract 5 mm\nG28 SC ;Do homeing, clean nozzles and let printer to know that printing started\nG92 X-6 ;Sets Curas checker board to match printers heated bed coordinates\nG1 F{speed_travel}\nM117 Printing..." },
         "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
         "machine_width": { "default_value": 200 },
-        "prime_tower_position_x": { "value": "185" },
-        "prime_tower_position_y": { "value": "160" },
         "print_sequence": { "enabled": false },
         "retraction_amount": { "default_value": 6 },
         "retraction_speed": { "default_value": 180 },
diff --git a/resources/definitions/makeit_pro_mx.def.json b/resources/definitions/makeit_pro_mx.def.json
index f7728af7f6..6d9c970010 100644
--- a/resources/definitions/makeit_pro_mx.def.json
+++ b/resources/definitions/makeit_pro_mx.def.json
@@ -42,8 +42,6 @@
         "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG28 ;home\nG1 F200 E30 ;extrude 30 mm of feed stock\nG92 E0 ;zero the extruded length\nG1 E-5 ;retract 5 mm\nG28 SC ;Do homeing, clean nozzles and let printer to know that printing started\nG92 X-6 ;Sets Curas checker board to match printers heated bed coordinates\nG1 F{speed_travel}\nM117 Printing..." },
         "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
         "machine_width": { "default_value": 200 },
-        "prime_tower_position_x": { "value": "185" },
-        "prime_tower_position_y": { "value": "160" },
         "print_sequence": { "enabled": false },
         "retraction_amount": { "default_value": 6 },
         "retraction_speed": { "default_value": 180 },
diff --git a/resources/definitions/raise3D_N2_dual.def.json b/resources/definitions/raise3D_N2_dual.def.json
index 690a9730b4..f7982165bf 100644
--- a/resources/definitions/raise3D_N2_dual.def.json
+++ b/resources/definitions/raise3D_N2_dual.def.json
@@ -42,8 +42,6 @@
         "machine_start_gcode": { "default_value": "G90\nG21\n; home all axes\nG28\nG92 X0 Y0 Z0\n; move heatbed into position\nG1 X20.0 Y20.0 Z1.0 F1000\n; zero extruders\nG92 E0 E1\nT0; right tool\n; set extruder steps per mm\nM92 E140\nT1; left tool\n; set extruder steps per mm\nM92 E140\nT0; left tool\nG92 E0 E1\n; purge nozzle\nG1 E25 F250\nT1; left tool\nG92 E0 E1\n; purge nozzle\nG1 E25 F250\n; zero extruders\nG92 E0 E1\n; move heatbed down a little more\nG1 Z5.0 F20\n; wait 600ms\nG4 600\n; move to tack down the strands\nG1 X20.0 Y30.0 Z0 F9000\n; wait 600ms\nG4 600\n;move up a bit\nG1 Z5.0 F9000\n; wait 300ms\nG4 300\n;fast move to center\nG1 X152.5 Y152.5 F9000\nT0\n;Raise3D Job Start\nM117 Printing...\nM1001\n" },
         "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
         "machine_width": { "default_value": 305 },
-        "prime_tower_position_x": { "value": "195" },
-        "prime_tower_position_y": { "value": "149" },
         "retraction_amount": { "default_value": 1.0 }
     }
 }
\ No newline at end of file
diff --git a/resources/definitions/raise3D_N2_plus_dual.def.json b/resources/definitions/raise3D_N2_plus_dual.def.json
index 6699696015..0652fb66b5 100644
--- a/resources/definitions/raise3D_N2_plus_dual.def.json
+++ b/resources/definitions/raise3D_N2_plus_dual.def.json
@@ -42,8 +42,6 @@
         "machine_start_gcode": { "default_value": "G90\nG21\n; home all axes\nG28\nG92 X0 Y0 Z0\n; move heatbed into position\nG1 X20.0 Y20.0 Z1.0 F1000\n; zero extruders\nG92 E0 E1\nT0; right tool\n; set extruder steps per mm\nM92 E140\nT1; left tool\n; set extruder steps per mm\nM92 E140\nT0; left tool\nG92 E0 E1\n; purge nozzle\nG1 E25 F250\nT1; left tool\nG92 E0 E1\n; purge nozzle\nG1 E25 F250\n; zero extruders\nG92 E0 E1\n; move heatbed down a little more\nG1 Z5.0 F20\n; wait 600ms\nG4 600\n; move to tack down the strands\nG1 X20.0 Y30.0 Z0 F9000\n; wait 600ms\nG4 600\n;move up a bit\nG1 Z5.0 F9000\n; wait 300ms\nG4 300\n;fast move to center\nG1 X152.5 Y152.5 F9000\nT0\n;Raise3D Job Start\nM117 Printing...\nM1001\n" },
         "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
         "machine_width": { "default_value": 305 },
-        "prime_tower_position_x": { "value": "195" },
-        "prime_tower_position_y": { "value": "149" },
         "retraction_amount": { "default_value": 1.0 }
     }
 }
\ No newline at end of file
diff --git a/resources/definitions/raise3D_N2_plus_single.def.json b/resources/definitions/raise3D_N2_plus_single.def.json
index 5508af2188..bafdd8a5bb 100644
--- a/resources/definitions/raise3D_N2_plus_single.def.json
+++ b/resources/definitions/raise3D_N2_plus_single.def.json
@@ -37,8 +37,6 @@
         "machine_start_gcode": { "default_value": "G90\nG21\n; home all axes\nG28\nG92 X0 Y0 Z0\n; move heatbed into position\nG1 X20.0 Y20.0 Z1.0 F1000\n; zero extruders\nG92 E0 E1\nT0; right tool\n; set extruder steps per mm\nM92 E140\n; purge nozzle\nG1 E25 F250\n; zero extruders\nG92 E0 E1\n; move heatbed down a little more\nG1 Z5.0 F20\n; wait 600ms\nG4 600\n; move to tack down the strands\nG1 X20.0 Y30.0 Z0 F9000\n; wait 600ms\nG4 600\n;move up a bit\nG1 Z5.0 F9000\n; wait 300ms\nG4 300\n;fast move to center\nG1 X152.5 Y152.5 F9000\nT0\n;Raise3D Job Start\nM117 Printing...\nM1001\n" },
         "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
         "machine_width": { "default_value": 305 },
-        "prime_tower_position_x": { "value": "195" },
-        "prime_tower_position_y": { "value": "149" },
         "retraction_amount": { "default_value": 1.0 }
     }
 }
\ No newline at end of file
diff --git a/resources/definitions/raise3D_N2_single.def.json b/resources/definitions/raise3D_N2_single.def.json
index e5a9af0a0e..65a28aac4c 100644
--- a/resources/definitions/raise3D_N2_single.def.json
+++ b/resources/definitions/raise3D_N2_single.def.json
@@ -37,8 +37,6 @@
         "machine_start_gcode": { "default_value": "G90\nG21\n; home all axes\nG28\nG92 X0 Y0 Z0\n; move heatbed into position\nG1 X20.0 Y20.0 Z1.0 F1000\n; zero extruders\nG92 E0 E1\nT0; right tool\n; set extruder steps per mm\nM92 E140\n; purge nozzle\nG1 E25 F250\n; zero extruders\nG92 E0 E1\n; move heatbed down a little more\nG1 Z5.0 F20\n; wait 600ms\nG4 600\n; move to tack down the strands\nG1 X20.0 Y30.0 Z0 F9000\n; wait 600ms\nG4 600\n;move up a bit\nG1 Z5.0 F9000\n; wait 300ms\nG4 300\n;fast move to center\nG1 X152.5 Y152.5 F9000\nT0\n;Raise3D Job Start\nM117 Printing...\nM1001\n" },
         "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
         "machine_width": { "default_value": 305 },
-        "prime_tower_position_x": { "value": "195" },
-        "prime_tower_position_y": { "value": "149" },
         "retraction_amount": { "default_value": 1.0 }
     }
 }
\ No newline at end of file
diff --git a/resources/definitions/skriware_2.def.json b/resources/definitions/skriware_2.def.json
index 642b766e0e..b022f27cf7 100644
--- a/resources/definitions/skriware_2.def.json
+++ b/resources/definitions/skriware_2.def.json
@@ -143,8 +143,6 @@
         "optimize_wall_printing_order": { "default_value": true },
         "prime_tower_flow": { "value": "99" },
         "prime_tower_min_volume": { "default_value": 4 },
-        "prime_tower_position_x": { "value": "1" },
-        "prime_tower_position_y": { "value": "1" },
         "prime_tower_size": { "default_value": 1 },
         "raft_acceleration": { "value": "400" },
         "raft_airgap": { "default_value": 0.2 },
diff --git a/resources/definitions/stereotech_ste320.def.json b/resources/definitions/stereotech_ste320.def.json
index 2674841411..cb3adabca6 100644
--- a/resources/definitions/stereotech_ste320.def.json
+++ b/resources/definitions/stereotech_ste320.def.json
@@ -45,8 +45,6 @@
         "machine_name": { "default_value": "Stereotech STE320" },
         "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;homing\nG1 Z15.0 F9000 ;move the platform down 15mm\nT1 ;Switch to the 2nd extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F200 E-{switch_extruder_retraction_amount}\nT0 ;Switch to the 1st extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
         "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
-        "machine_width": { "default_value": 218 },
-        "prime_tower_position_x": { "value": "195" },
-        "prime_tower_position_y": { "value": "149" }
+        "machine_width": { "default_value": 218 }
     }
 }
\ No newline at end of file
diff --git a/resources/definitions/strateo3d.def.json b/resources/definitions/strateo3d.def.json
index 564ae78254..f21a13ca86 100644
--- a/resources/definitions/strateo3d.def.json
+++ b/resources/definitions/strateo3d.def.json
@@ -226,8 +226,6 @@
         "meshfix_maximum_deviation": { "default_value": 0.04 },
         "optimize_wall_printing_order": { "value": "True" },
         "prime_tower_min_volume": { "default_value": 35 },
-        "prime_tower_position_x": { "value": "machine_width/2 + prime_tower_size/2" },
-        "prime_tower_position_y": { "value": "machine_depth - prime_tower_size - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" },
         "retraction_amount": { "default_value": 1.5 },
         "retraction_combing_max_distance": { "default_value": 5 },
         "retraction_count_max": { "default_value": 15 },
diff --git a/resources/definitions/strateo3d_IDEX420.def.json b/resources/definitions/strateo3d_IDEX420.def.json
index 3c217dea34..d4236c126e 100644
--- a/resources/definitions/strateo3d_IDEX420.def.json
+++ b/resources/definitions/strateo3d_IDEX420.def.json
@@ -114,8 +114,6 @@
         "material_diameter": { "default_value": 1.75 },
         "prime_tower_enable": { "default_value": true },
         "prime_tower_min_volume": { "default_value": 35.6 },
-        "prime_tower_position_x": { "value": "machine_depth / 2 - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' or (prime_tower_brim_enable and adhesion_type != 'raft') else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - max(map(abs, extruderValues('machine_nozzle_offset_x'))) - 1" },
-        "prime_tower_position_y": { "value": "machine_depth / 2 - prime_tower_size - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' or (prime_tower_brim_enable and adhesion_type != 'raft') else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - max(map(abs, extruderValues('machine_nozzle_offset_y'))) - 3" },
         "raft_acceleration": { "value": "machine_acceleration" },
         "raft_base_acceleration": { "value": "machine_acceleration" },
         "raft_interface_acceleration": { "value": "machine_acceleration" },
diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json
index af8fc07122..058b3dfa7a 100644
--- a/resources/definitions/ultimaker3.def.json
+++ b/resources/definitions/ultimaker3.def.json
@@ -150,7 +150,6 @@
             "value": "resolveOrValue('print_sequence') != 'one_at_a_time'"
         },
         "prime_tower_enable": { "default_value": true },
-        "prime_tower_position_x": { "value": "machine_depth - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) - 30" },
         "prime_tower_wipe_enabled": { "default_value": false },
         "retraction_amount": { "value": "6.5" },
         "retraction_hop": { "value": "2" },
diff --git a/resources/definitions/ultimaker_original_dual.def.json b/resources/definitions/ultimaker_original_dual.def.json
index ee024dcf0d..a4cd6bfdf0 100644
--- a/resources/definitions/ultimaker_original_dual.def.json
+++ b/resources/definitions/ultimaker_original_dual.def.json
@@ -89,8 +89,6 @@
         "machine_name": { "default_value": "Ultimaker Original" },
         "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nT1 ;Switch to the 2nd extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F200 E-{switch_extruder_retraction_amount}\nT0 ;Switch to the 1st extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
         "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
-        "machine_width": { "default_value": 205 },
-        "prime_tower_position_x": { "value": "195" },
-        "prime_tower_position_y": { "value": "149" }
+        "machine_width": { "default_value": 205 }
     }
 }
\ No newline at end of file
diff --git a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg
index 3b5437d0d4..f4da80ded9 100644
--- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg
@@ -40,8 +40,6 @@ optimize_wall_printing_order = True
 prime_tower_brim_enable = True
 prime_tower_enable = True
 prime_tower_min_volume = 6
-prime_tower_position_x = 169
-prime_tower_position_y = 25
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
diff --git a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg
index 3a6467bdc2..a052562cd3 100644
--- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg
@@ -40,8 +40,6 @@ optimize_wall_printing_order = True
 prime_tower_brim_enable = True
 prime_tower_enable = True
 prime_tower_min_volume = 6
-prime_tower_position_x = 169
-prime_tower_position_y = 25
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
diff --git a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg
index 1a763f07ec..145cd34ead 100644
--- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg
@@ -38,8 +38,6 @@ optimize_wall_printing_order = True
 prime_tower_brim_enable = True
 prime_tower_enable = True
 prime_tower_min_volume = 6
-prime_tower_position_x = 169
-prime_tower_position_y = 25
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
diff --git a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg
index 69698b555b..e6e2cb78a0 100644
--- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg
@@ -38,8 +38,6 @@ optimize_wall_printing_order = True
 prime_tower_brim_enable = True
 prime_tower_enable = True
 prime_tower_min_volume = 6
-prime_tower_position_x = 169
-prime_tower_position_y = 25
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
diff --git a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg
index 404eb48a2e..56587fe883 100644
--- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg
@@ -37,8 +37,6 @@ optimize_wall_printing_order = True
 prime_tower_brim_enable = True
 prime_tower_enable = True
 prime_tower_min_volume = 6
-prime_tower_position_x = 169
-prime_tower_position_y = 25
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
diff --git a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg
index c85a86507a..10353f6110 100644
--- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg
@@ -37,8 +37,6 @@ optimize_wall_printing_order = True
 prime_tower_brim_enable = True
 prime_tower_enable = True
 prime_tower_min_volume = 6
-prime_tower_position_x = 169
-prime_tower_position_y = 25
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
diff --git a/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg b/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg
index 62b96f2e85..d9f0a0aaea 100644
--- a/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg
+++ b/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg
@@ -31,8 +31,6 @@ ooze_shield_angle = 20
 ooze_shield_dist = 4
 ooze_shield_enabled = True
 prime_tower_enable = False
-prime_tower_position_x = 350
-prime_tower_position_y = 350
 retraction_amount = 0.75
 retraction_combing = off
 retraction_speed = 70
diff --git a/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg b/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg
index 4ce1ac32d9..620622e555 100644
--- a/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg
+++ b/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg
@@ -31,8 +31,6 @@ ooze_shield_angle = 20
 ooze_shield_dist = 4
 ooze_shield_enabled = True
 prime_tower_enable = False
-prime_tower_position_x = 350
-prime_tower_position_y = 350
 retraction_amount = 0.75
 retraction_combing = off
 retraction_speed = 70
diff --git a/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg b/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg
index e37ec93ea8..05eeb68305 100644
--- a/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg
+++ b/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg
@@ -31,8 +31,6 @@ ooze_shield_angle = 20
 ooze_shield_dist = 4
 ooze_shield_enabled = True
 prime_tower_enable = False
-prime_tower_position_x = 350
-prime_tower_position_y = 350
 retraction_amount = 0.75
 retraction_combing = off
 retraction_speed = 70
diff --git a/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg b/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg
index dcbfb3d58a..b63ef09a6b 100644
--- a/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg
+++ b/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg
@@ -30,8 +30,6 @@ ooze_shield_angle = 20
 ooze_shield_dist = 4
 ooze_shield_enabled = True
 prime_tower_enable = False
-prime_tower_position_x = 350
-prime_tower_position_y = 350
 retraction_amount = 0.75
 retraction_combing = off
 retraction_speed = 70
diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg
index 35106e960c..ac5f3e5bee 100644
--- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg
+++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg
@@ -24,8 +24,6 @@ material_print_temperature = =default_material_print_temperature
 optimize_wall_printing_order = True
 prime_tower_enable = True
 prime_tower_flow = 110
-prime_tower_position_x = 127.5
-prime_tower_position_y = =math.ceil(250-prime_tower_size)
 prime_tower_size = 35
 retraction_min_travel = 2
 skirt_gap = 2
diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg
index 9b6258a1f4..eca85becc6 100644
--- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg
+++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg
@@ -21,8 +21,6 @@ material_print_temperature = =default_material_print_temperature
 optimize_wall_printing_order = True
 prime_tower_enable = True
 prime_tower_flow = 110
-prime_tower_position_x = 127.5
-prime_tower_position_y = =math.ceil(250-prime_tower_size)
 prime_tower_size = 35
 retraction_hop_enabled = False
 support_enable = True
diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg
index 9ad32705aa..8071d7193e 100644
--- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg
+++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg
@@ -32,8 +32,6 @@ material_print_temperature = =default_material_print_temperature
 optimize_wall_printing_order = True
 prime_tower_enable = True
 prime_tower_flow = 110
-prime_tower_position_x = 127.5
-prime_tower_position_y = =math.ceil(250-prime_tower_size)
 prime_tower_size = 35
 retraction_amount = 5
 retraction_hop_enabled = False
diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg
index 5aa5a445fe..8354fba5e0 100644
--- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg
+++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg
@@ -32,8 +32,6 @@ material_print_temperature = =default_material_print_temperature
 optimize_wall_printing_order = True
 prime_tower_enable = True
 prime_tower_flow = 110
-prime_tower_position_x = 127.5
-prime_tower_position_y = =math.ceil(250-prime_tower_size)
 prime_tower_size = 35
 retraction_amount = 5
 retraction_hop_enabled = False
diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg
index 262090dce6..074632abda 100644
--- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg
+++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg
@@ -21,8 +21,6 @@ material_print_temperature = =default_material_print_temperature
 optimize_wall_printing_order = True
 prime_tower_enable = True
 prime_tower_flow = 110
-prime_tower_position_x = 127.5
-prime_tower_position_y = =math.ceil(250-prime_tower_size)
 prime_tower_size = 35
 retraction_hop_enabled = False
 support_enable = True
diff --git a/resources/setting_visibility/expert.cfg b/resources/setting_visibility/expert.cfg
index ff502fd80a..d2e5319c87 100644
--- a/resources/setting_visibility/expert.cfg
+++ b/resources/setting_visibility/expert.cfg
@@ -358,6 +358,9 @@ prime_tower_position_x
 prime_tower_position_y
 prime_tower_wipe_enabled
 prime_tower_brim_enable
+prime_tower_base_size
+prime_tower_base_height
+prime_tower_base_curvature
 ooze_shield_enabled
 ooze_shield_angle
 ooze_shield_dist