diff --git a/resources/quality/strateo3d/Standard_1.2/s3d_std1.2_PLA_H.inst.cfg b/resources/quality/strateo3d/Standard_1.2/s3d_std1.2_PLA_H.inst.cfg
new file mode 100644
index 0000000000..539ba52bc8
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2/s3d_std1.2_PLA_H.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = H
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = h
+weight = -1
+material = emotiontech_pla
+variant = Standard 1.2
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.15
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 27/35)
+speed_wall_0 = =math.ceil(speed_print * 23/35)
+speed_topbottom = =math.ceil(speed_print * 30/35)
+speed_layer_0 = =math.ceil(speed_print * 25/35)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 91
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file