From 08f76162942d638c3db58c0016015c4e92783106 Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Fri, 16 Aug 2024 14:40:37 +0200 Subject: [PATCH 1/6] Import gradual flow settings with classic ones CURA-12096 --- resources/definitions/fdmprinter.def.json | 58 +++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index c0c90dc6d7..4796453293 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -765,6 +765,14 @@ "settable_per_mesh": false, "settable_per_extruder": false, "settable_per_meshgroup": false + }, + "reset_flow_duration": { + "enabled": "gradual_flow_enabled", + "value": 2.0, + "label": "Reset flow duration", + "description": "For any travel move longer than this value, the material flow is reset to the paths target flow", + "unit": "s", + "type": "float" } } }, @@ -3140,6 +3148,56 @@ "enabled": false, "settable_per_mesh": false, "settable_per_extruder": true + }, + "gradual_flow_enabled": { + "label": "Gradual flow enabled", + "description": "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops.", + "type": "bool", + "default_value": false, + "settable_per_mesh": false, + "settable_per_extruder": true + }, + "max_flow_acceleration": { + "enabled": "gradual_flow_enabled", + "label": "Gradual flow max acceleration", + "description": "Maximum acceleration for gradual flow changes", + "type": "float", + "unit": "mm\u00b3\/s\u00b2", + "default_value": 1, + "minimum_value_warning": 0.1, + "maximum_value_warning": 99999, + "minimum_value": 0.01, + "settable_per_mesh": false, + "settable_per_extruder": true, + "comments": "when enabled, each second the flow will at max be increased/decreased by this value" + }, + "layer_0_max_flow_acceleration": { + "enabled": "gradual_flow_enabled", + "value": "max_flow_acceleration", + "label": "Initial layer max flow acceleration", + "description": "Minimum speed for gradual flow changes for the first layer", + "type": "float", + "unit": "mm\u00b3\/s\u00b2", + "default_value": 1, + "minimum_value_warning": 0.1, + "maximum_value_warning": 99999, + "minimum_value": 0.01, + "settable_per_mesh": false, + "settable_per_extruder": true + }, + "gradual_flow_discretisation_step_size": { + "enabled": "gradual_flow_enabled", + "label": "Gradual flow discretisation step size", + "description": "Duration of each step in the gradual flow change", + "type": "float", + "unit": "s", + "default_value": 0.2, + "maximum_value_warning": 1.0, + "maximum_value": 5.0, + "minimum_value_warning": 0.1, + "minimum_value": 0.01, + "settable_per_mesh": false, + "settable_per_extruder": true } } }, From 5a4ce498d47e82de8b8437199926bb704424909b Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Fri, 16 Aug 2024 14:57:58 +0200 Subject: [PATCH 2/6] Remove gradual flow plugin dependency CURA-12096 --- conandata.yml | 14 -------------- conanfile.py | 14 +++----------- 2 files changed, 3 insertions(+), 25 deletions(-) diff --git a/conandata.yml b/conandata.yml index 0640813146..3a2f90bbe1 100644 --- a/conandata.yml +++ b/conandata.yml @@ -5,7 +5,6 @@ requirements: - "curaengine/(latest)@ultimaker/testing" - "cura_binary_data/(latest)@ultimaker/testing" - "fdm_materials/(latest)@ultimaker/testing" - - "curaengine_plugin_gradual_flow/0.1.0-beta.4" - "dulcificum/0.2.1" - "pysavitar/5.3.0" - "pynest2d/5.3.0" @@ -34,14 +33,6 @@ pyinstaller: package: "cura" src: "plugins" dst: "share/cura/plugins" - curaengine_gradual_flow_plugin: - package: "curaengine_plugin_gradual_flow" - src: "res/plugins/CuraEngineGradualFlow" - dst: "share/cura/plugins/CuraEngineGradualFlow" - curaengine_gradual_flow_plugin_bundled: - package: "curaengine_plugin_gradual_flow" - src: "res/bundled_packages" - dst: "share/cura/resources/bundled_packages" native_cad_plugin: package: "native_cad_plugin" src: "res/plugins/NativeCADplugin" @@ -105,11 +96,6 @@ pyinstaller: src: "bin" dst: "." binary: "CuraEngine" - curaengine_gradual_flow_plugin_service: - package: "curaengine_plugin_gradual_flow" - src: "bin" - dst: "." - binary: "curaengine_plugin_gradual_flow" hiddenimports: - "pySavitar" - "pyArcus" diff --git a/conanfile.py b/conanfile.py index 787c26785f..f21f7b40b8 100644 --- a/conanfile.py +++ b/conanfile.py @@ -390,17 +390,11 @@ class CuraConan(ConanFile): copy(self, "CuraEngine", curaengine.bindirs[0], self.source_folder, keep_path = False) # Copy the external plugins that we want to bundle with Cura - rmdir(self,str(self.source_path.joinpath("plugins", "CuraEngineGradualFlow"))) - curaengine_plugin_gradual_flow = self.dependencies["curaengine_plugin_gradual_flow"].cpp_info - copy(self, "*", curaengine_plugin_gradual_flow.resdirs[0], str(self.source_path.joinpath("plugins", "CuraEngineGradualFlow")), keep_path = True) - copy(self, "*", curaengine_plugin_gradual_flow.bindirs[0], self.source_folder, keep_path = False) - copy(self, "bundled_*.json", curaengine_plugin_gradual_flow.resdirs[1], str(self.source_path.joinpath("resources", "bundled_packages")), keep_path = False) - if self._enterprise: rmdir(self, str(self.source_path.joinpath("plugins", "NativeCADplugin"))) - curaengine_plugin_gradual_flow = self.dependencies["native_cad_plugin"].cpp_info - copy(self, "*", curaengine_plugin_gradual_flow.resdirs[0], str(self.source_path.joinpath("plugins", "NativeCADplugin")), keep_path = True) - copy(self, "bundled_*.json", curaengine_plugin_gradual_flow.resdirs[1], str(self.source_path.joinpath("resources", "bundled_packages")), keep_path = False) + native_cad_plugin = self.dependencies["native_cad_plugin"].cpp_info + copy(self, "*", native_cad_plugin.resdirs[0], str(self.source_path.joinpath("plugins", "NativeCADplugin")), keep_path = True) + copy(self, "bundled_*.json", native_cad_plugin.resdirs[1], str(self.source_path.joinpath("resources", "bundled_packages")), keep_path = False) # Copy resources of cura_binary_data cura_binary_data = self.dependencies["cura_binary_data"].cpp_info @@ -517,8 +511,6 @@ echo "CURA_APP_NAME={{ cura_app_name }}" >> ${{ env_prefix }}GITHUB_ENV copy(self, "requirement*.txt", src = self.source_folder, dst = os.path.join(self.package_folder, self.cpp.package.resdirs[-1])) copy(self, "*", src = os.path.join(self.source_folder, "packaging"), dst = os.path.join(self.package_folder, self.cpp.package.resdirs[2])) - # Remove the CuraEngineGradualFlow plugin from the package - rmdir(self, os.path.join(self.package_folder, self.cpp.package.resdirs[1], "CuraEngineGradualFlow")) rm(self, "bundled_*.json", os.path.join(self.package_folder, self.cpp.package.resdirs[0], "bundled_packages"), recursive = False) # Remove the fdm_materials from the package From b3d27076631c4f3355f1dbe8dcc5f3c7f829b2ab Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Fri, 16 Aug 2024 14:59:49 +0200 Subject: [PATCH 3/6] Rename gradual flow settings defined in profiles CURA-12096 --- .../ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg | 2 +- .../um_s3_aa0.4_um-abs_0.15mm_engineering.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_visual.inst.cfg | 2 +- .../um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg | 2 +- .../um_s3_aa0.4_um-abs_0.2mm_engineering.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_quick.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_visual.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm_quick.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm_visual.inst.cfg | 2 +- .../um_s3_aa0.4_um-petg_0.15mm_engineering.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_visual.inst.cfg | 2 +- .../um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_visual.inst.cfg | 2 +- .../um_s3_aa0.4_um-petg_0.2mm_engineering.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_quick.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_visual.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm_quick.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg | 2 +- .../um_s3_aa0.4_um-pla_0.15mm_engineering.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_visual.inst.cfg | 2 +- .../um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg | 2 +- .../um_s3_aa0.4_um-pla_0.2mm_engineering.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_quick.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_visual.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm_quick.inst.cfg | 2 +- .../um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg | 2 +- .../um_s3_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg | 2 +- .../um_s3_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg | 2 +- .../um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg | 2 +- .../um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg | 2 +- .../um_s3_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg | 2 +- .../um_s3_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg | 2 +- .../um_s3_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg | 2 +- .../um_s3_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg | 2 +- .../um_s3_aa0.8_um-abs_0.2mm_engineering.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_quick.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_visual.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm_quick.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm_quick.inst.cfg | 2 +- .../um_s3_aa0.8_um-petg_0.2mm_engineering.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_quick.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_visual.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm_quick.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm_quick.inst.cfg | 2 +- .../um_s3_aa0.8_um-pla_0.2mm_engineering.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_quick.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_visual.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm_quick.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm_quick.inst.cfg | 2 +- .../um_s3_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg | 2 +- .../um_s3_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg | 2 +- .../um_s3_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg | 2 +- .../um_s3_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg | 2 +- .../um_s3_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg | 2 +- .../um_s5_aa0.4_um-abs_0.15mm_engineering.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_visual.inst.cfg | 2 +- .../um_s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg | 2 +- .../um_s5_aa0.4_um-abs_0.2mm_engineering.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_quick.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_visual.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm_quick.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm_visual.inst.cfg | 2 +- .../um_s5_aa0.4_um-petg_0.15mm_engineering.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_visual.inst.cfg | 2 +- .../um_s5_aa0.4_um-petg_0.1mm_engineering.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_visual.inst.cfg | 2 +- .../um_s5_aa0.4_um-petg_0.2mm_engineering.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_quick.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_visual.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm_quick.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg | 2 +- .../um_s5_aa0.4_um-pla_0.15mm_engineering.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_visual.inst.cfg | 2 +- .../um_s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg | 2 +- .../um_s5_aa0.4_um-pla_0.2mm_engineering.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_quick.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_visual.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm_quick.inst.cfg | 2 +- .../um_s5_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg | 2 +- .../um_s5_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg | 2 +- .../um_s5_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg | 2 +- .../um_s5_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg | 2 +- .../um_s5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg | 2 +- .../um_s5_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg | 2 +- .../um_s5_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg | 2 +- .../um_s5_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg | 2 +- .../um_s5_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg | 2 +- .../um_s5_aa0.8_um-abs_0.2mm_engineering.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_quick.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_visual.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm_quick.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm_quick.inst.cfg | 2 +- .../um_s5_aa0.8_um-petg_0.2mm_engineering.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_quick.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_visual.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm_quick.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm_quick.inst.cfg | 2 +- .../um_s5_aa0.8_um-pla_0.2mm_engineering.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_quick.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_visual.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm_quick.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm_quick.inst.cfg | 2 +- .../um_s5_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg | 2 +- .../um_s5_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg | 2 +- .../um_s5_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg | 2 +- .../um_s5_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg | 2 +- .../um_s5_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg | 2 +- .../ultimaker_factor4/um_f4_aa0.25_petg_0.1mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.25_pla_0.1mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.25_tough-pla_0.1mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_abs_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_bam_0.15mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_bam_0.1mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_bam_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_bam_0.3mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_cpe-plus_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_cpe_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_nylon_0.2mm.inst.cfg | 6 +++--- .../quality/ultimaker_factor4/um_f4_aa0.4_pc_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_petg_0.1mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_petg_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_petg_0.3mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_pla_0.1mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_pla_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_pla_0.3mm.inst.cfg | 6 +++--- .../quality/ultimaker_factor4/um_f4_aa0.4_pp_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_tough-pla_0.1mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_tough-pla_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_tough-pla_0.3mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.4_tpu_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.8_abs_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.8_cpe_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.8_nylon_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.8_petg_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.8_petg_0.4mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.8_pla_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.8_pla_0.4mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.8_tough-pla_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.8_tough-pla_0.4mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_aa0.8_tpu_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_bb0.4_pva_0.15mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_cc0.4_petcf_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_cc0.6_petcf_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_cc0.6_pla_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_cc0.6_pla_0.3mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_ht0.6_cffpps_0.2mm.inst.cfg | 6 +++--- .../ultimaker_factor4/um_f4_ht0.6_petcf_0.2mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg | 6 +++--- .../ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg | 6 +++--- .../ultimaker_s3/um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg | 6 +++--- .../ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg | 6 +++--- .../ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg | 6 +++--- .../ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg | 6 +++--- .../ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg | 6 +++--- .../ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg | 6 +++--- .../ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg | 6 +++--- .../ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg | 6 +++--- .../quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg | 6 +++--- .../ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg | 6 +++--- .../ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg | 6 +++--- .../ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg | 6 +++--- .../ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg | 6 +++--- .../ultimaker_s5/um_s5_aa0.25_um-tough-pla_0.1mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg | 6 +++--- .../ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm.inst.cfg | 6 +++--- .../ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg | 6 +++--- .../ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg | 6 +++--- .../ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg | 6 +++--- .../ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg | 6 +++--- .../ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg | 6 +++--- .../ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg | 6 +++--- .../quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg | 6 +++--- .../ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg | 6 +++--- .../ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg | 6 +++--- .../ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg | 6 +++--- 230 files changed, 466 insertions(+), 466 deletions(-) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg index b29c0a9521..b564c7313b 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_engineering.inst.cfg index 162e979a83..f1b0afec9b 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_visual.inst.cfg index e3a7c7c27c..11562ae1fb 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg index de545bf35e..e2431286fb 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg index ccc826e880..cb291e4d22 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_engineering.inst.cfg index d7a8e06998..8ff65ade01 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_quick.inst.cfg index 0efe56e0dc..156f1dd1a0 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_visual.inst.cfg index 27c578bb70..8f970ac316 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm_quick.inst.cfg index 1155247785..380b625c98 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm_visual.inst.cfg index cfe96cd0f0..d163b3e2ed 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_engineering.inst.cfg index 205b8f4d51..a32d5b5ca3 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_visual.inst.cfg index 19208319d8..5c1bd3ed28 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg index 09d2f2ba99..735b36bb68 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_visual.inst.cfg index a12c1ebfd3..d70042b46e 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_engineering.inst.cfg index 286a6b0e07..bcf0b9b822 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_quick.inst.cfg index 6254e3b68f..c3c1809677 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_visual.inst.cfg index 9dafc8b132..a8a196148b 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm_quick.inst.cfg index 09673e6098..0b67c38f13 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg index 9e82f05e6c..b385396256 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_engineering.inst.cfg index 9454381e88..f7706dd7b3 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_visual.inst.cfg index 64110998e3..2ff9e8f910 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg index 77c867c2ad..26971b07d4 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg index 239f5815cc..0b47f98be0 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_engineering.inst.cfg index 14f9aa110c..a165acd3fb 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_quick.inst.cfg index 0889942919..ae7a71ee42 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_visual.inst.cfg index 2854968225..33b2f9ff41 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm_quick.inst.cfg index 6371e933dc..f04fb58285 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg index f43a885619..f6495c4d78 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg index bb457acb89..a62516cc0f 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg index 2ea031a390..2f2606c692 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg index 7b66700a7d..6902355015 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg index eec67d4aa5..f09d2d31f4 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg index 24c1c424b8..66f1128335 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg index b1abec1364..9bbbf9ce00 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg index 686ee6ccb2..56aed4eef5 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg index 61b6704313..e5686e5d39 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_engineering.inst.cfg index c1db44dcc4..66b710fc46 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_quick.inst.cfg index 1d6c709517..e339629142 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_visual.inst.cfg index 1e824ed44c..66caea2738 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm_quick.inst.cfg index 6552e6e66a..924d47f199 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm_quick.inst.cfg index 9ed04a2141..5fd296d93b 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_engineering.inst.cfg index b961efe0eb..a02ae0f040 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_quick.inst.cfg index 1f65b1be8a..f0b0e296aa 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_visual.inst.cfg index 40cbea238f..c1450e6f11 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm_quick.inst.cfg index 339f02e070..3f6de1cf17 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm_quick.inst.cfg index f1aa58b68e..361d479df5 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_engineering.inst.cfg index 1a94de81f8..a9081a6c0a 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_quick.inst.cfg index 7769b3ed66..edd834071a 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_visual.inst.cfg index 51e407aa52..405be88f85 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm_quick.inst.cfg index 1e55929f44..d5dbeba9fc 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm_quick.inst.cfg index 531ffab063..404c31f71e 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg index 5d470eabca..c86f485e43 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg index 010abc2354..ab5c443ae3 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg index 701b852b80..b427f2f52d 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg index f8d86eb50a..cdc79118ed 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg index 365fea42ab..90adf96269 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg index 4207e39a8c..adec4d27a5 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_engineering.inst.cfg index e74ed67f23..4e7b98a666 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_visual.inst.cfg index 74de88b39c..7907a9b54e 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg index 17a78ae0f4..40b13faf07 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg index 7f14d6b9be..51f3d28cd0 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_engineering.inst.cfg index 20d5b34c30..3af0b045b0 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_quick.inst.cfg index 663980f2e9..b6dceac3ab 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_visual.inst.cfg index ae48539ca6..ddc8d4cc80 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm_quick.inst.cfg index db1684399e..c8293680c5 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm_visual.inst.cfg index c18fad115e..050c24f486 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_engineering.inst.cfg index e03d98bbd8..aab72b9586 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_visual.inst.cfg index d49ea90995..10d2359596 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_engineering.inst.cfg index 056ecd4177..154068e75b 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_visual.inst.cfg index ce82524afc..1b9f5362d0 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_engineering.inst.cfg index ac93bc17d5..a5ec24936c 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_quick.inst.cfg index a6d971eb51..6a1e1341ac 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_visual.inst.cfg index dadd4384af..2e38d3edf0 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm_quick.inst.cfg index be73a3ad1b..494b7564f7 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg index 367c5a8ab1..cfd6c67cf8 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_engineering.inst.cfg index 9f15ad8ed6..297f663a08 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_visual.inst.cfg index 7a789b8668..78c3a117b4 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg index 7b2b42ae0b..f68cb81b20 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg index 33d52d7ec7..9ef2567d5f 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_engineering.inst.cfg index ce5666e06a..c36bc2cfef 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_quick.inst.cfg index de02366f81..b95ba9a53e 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_visual.inst.cfg index 0aaf94199e..97ade11274 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm_quick.inst.cfg index 15891975a3..bc8e48e420 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg index bbf46cce48..3b356743ea 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg index 6ef21ed75f..d417eed137 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg index 44e1053064..d420bdc315 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg index 0f4db503b2..c7c7d7b2a7 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg index bce5174047..c0d79948fb 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg index eedc26a947..645892c120 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg index 3831ec4895..0943b483cc 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg index 20ae02a33e..9a59c5a90c 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg index 0eef7bf1ed..7bcea7b25a 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_engineering.inst.cfg index ded0f97db3..28587cd917 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_quick.inst.cfg index 7881350346..4c0324761e 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_visual.inst.cfg index 458e5a301f..ea1f8c442b 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm_quick.inst.cfg index f6defe9a0c..9f8b32dc27 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm_quick.inst.cfg index cf05092f62..e6c8962ab9 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_engineering.inst.cfg index 83c84bf162..63cee911e4 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_quick.inst.cfg index 5990c5cb2b..d1aef1f7bb 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_visual.inst.cfg index aa0e6b305f..b250a12dc9 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm_quick.inst.cfg index 5584c5e00a..5615252dbd 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm_quick.inst.cfg index eba95b253b..f75225b75e 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_engineering.inst.cfg index 5688775572..774500d9b9 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_quick.inst.cfg index efbe56dee7..8df66c064d 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_visual.inst.cfg index afc9e10f57..81da60bfb7 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm_quick.inst.cfg index c32dce45b5..b05d4c2aad 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm_quick.inst.cfg index 8f24be0b25..82bec9cd26 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg index cc382d57f5..341dca024b 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg index b270814153..134bcb896f 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg index 94930d23a6..8cc4526dba 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg index c844739f28..461f1128b3 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg index 1e60bc8806..c919d1a546 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg @@ -12,7 +12,7 @@ type = intent variant = AA 0.8 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False +gradual_flow_enabled = False acceleration_wall_0 = 2000 gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.25_petg_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.25_petg_0.1mm.inst.cfg index a43607553c..654b19912b 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.25_petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.25_petg_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.25 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.965 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.25_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.25_pla_0.1mm.inst.cfg index 005afd9d7c..ddc63dba42 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.25_pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.25_pla_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.25 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.25_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.25_tough-pla_0.1mm.inst.cfg index de686a7325..a36ead8204 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.25_tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.25_tough-pla_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.25 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.965 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_abs_0.2mm.inst.cfg index 19bbdea933..cdd4ff4075 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_abs_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.93 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.15mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.15mm.inst.cfg index 44ae90f27d..98d4073c24 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.15mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 brim_replaces_support = False build_volume_temperature = =50 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.1mm.inst.cfg index 4d19af3298..9fbef3cc80 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 brim_replaces_support = False build_volume_temperature = =50 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.2mm.inst.cfg index bb057c5cda..94b2bba250 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 brim_replaces_support = False build_volume_temperature = =50 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.3mm.inst.cfg index 7203764593..11cb5c0af6 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 brim_replaces_support = False build_volume_temperature = =50 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_cpe-plus_0.2mm.inst.cfg index a35f2d6e10..781bfb1bea 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_cpe-plus_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.93 speed_print = 80 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_cpe_0.2mm.inst.cfg index 8956b5287f..15dc271153 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_cpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_cpe_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.965 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_nylon_0.2mm.inst.cfg index f6ae48bf11..d26adc9108 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_nylon_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_nylon_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.965 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pc_0.2mm.inst.cfg index 3257605cd2..5d9cf3041f 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pc_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pc_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.965 speed_print = 80 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.1mm.inst.cfg index b0794b514e..912fe13555 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in material_print_temperature = =default_material_print_temperature - 10 skin_material_flow = =material_flow * 0.965 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.2mm.inst.cfg index f11d73dbbd..c515323cb5 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.965 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.3mm.inst.cfg index 988c06664e..6e3d48d868 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.965 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.1mm.inst.cfg index 1ca784384a..21dc393666 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.93 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.2mm.inst.cfg index 5a22723bfd..0ed49fe031 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.93 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.3mm.inst.cfg index 76b9af883d..efd521f6bb 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in material_print_temperature = =default_material_print_temperature + 15 skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pp_0.2mm.inst.cfg index d4cb4e3f0a..3b54454dfc 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pp_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 brim_width = 20 inset_direction = outside_in skin_material_flow = =material_flow * 0.965 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.1mm.inst.cfg index 5606af1f31..c9a48c4dfb 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.965 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.2mm.inst.cfg index ffdc37f93f..0351fe25b9 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.965 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.3mm.inst.cfg index d900773976..92ba952865 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in material_print_temperature = =default_material_print_temperature + 15 skin_material_flow = =material_flow * 0.965 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_tpu_0.2mm.inst.cfg index f7a360beaa..0a01955877 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_tpu_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 50 else 'cross_3d' infill_sparse_density = 10 inset_direction = outside_in diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_abs_0.2mm.inst.cfg index b5bb6abc8f..a72036c7c6 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_abs_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_cpe_0.2mm.inst.cfg index 9908a3bb85..d2f1166ac6 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_cpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_cpe_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.965 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_nylon_0.2mm.inst.cfg index a6b9e84f6c..cebb307e08 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_nylon_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_nylon_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.965 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_petg_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_petg_0.2mm.inst.cfg index 57355ea4f1..83d4c9db82 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_petg_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.965 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_petg_0.4mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_petg_0.4mm.inst.cfg index 134a7c2684..810ec4b7e7 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_petg_0.4mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.965 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_pla_0.2mm.inst.cfg index 536aed0d0d..26eddbe482 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_pla_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in material_print_temperature = =default_material_print_temperature + 15 skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_pla_0.4mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_pla_0.4mm.inst.cfg index a6e58a1a62..d4ef31be27 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_pla_0.4mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in material_print_temperature = =default_material_print_temperature + 15 skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tough-pla_0.2mm.inst.cfg index ed182ab57d..3faaa01606 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tough-pla_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in material_print_temperature = =default_material_print_temperature + 15 skin_material_flow = =material_flow * 0.965 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tough-pla_0.4mm.inst.cfg index 70a6f9925d..5cb0d7506c 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tough-pla_0.4mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in material_print_temperature = =default_material_print_temperature + 15 skin_material_flow = =material_flow * 0.965 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.2mm.inst.cfg index 7db0c220f4..d5bd1c08db 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 50 else 'cross_3d' infill_sparse_density = 10 inset_direction = outside_in diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.15mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.15mm.inst.cfg index bae4a519f3..9705db21e1 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.15mm.inst.cfg @@ -12,9 +12,9 @@ variant = BB 0.4 weight = -1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_support_bottom = 100 acceleration_support_interface = 1500 brim_replaces_support = False diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg index 95b7c1856d..0dfae8bd2d 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = BB 0.4 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_support_bottom = 100 acceleration_support_interface = 1500 brim_replaces_support = False diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg index 8de45aa01b..e29f829c46 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = BB 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_support_bottom = 100 acceleration_support_interface = 1500 brim_replaces_support = False diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg index be24017486..5221b2ba51 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = BB 0.4 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_support_bottom = 100 acceleration_support_interface = 1500 brim_replaces_support = False diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg index 1e1ab101f4..a3aee5c410 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = BB 0.8 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_support_bottom = 100 acceleration_support_interface = 1500 brim_replaces_support = False diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg index 2ae11eb441..c0b5405c16 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = BB 0.8 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_support_bottom = 100 acceleration_support_interface = 1500 brim_replaces_support = False diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg index 448152ca8e..55d35b554e 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg @@ -12,9 +12,9 @@ variant = BB 0.8 weight = -4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_support_bottom = 100 acceleration_support_interface = 1500 brim_replaces_support = False diff --git a/resources/quality/ultimaker_factor4/um_f4_cc0.4_petcf_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_cc0.4_petcf_0.2mm.inst.cfg index 3f00103ddd..efb681510a 100644 --- a/resources/quality/ultimaker_factor4/um_f4_cc0.4_petcf_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_cc0.4_petcf_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = CC 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.5 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.1 +gradual_flow_discretisation_step_size = 0.5 +gradual_flow_enabled = True +max_flow_acceleration = 0.1 cool_fan_speed_max = =cool_fan_speed infill_wall_line_count = 1 material_shrinkage_percentage = 100.15 diff --git a/resources/quality/ultimaker_factor4/um_f4_cc0.6_petcf_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_cc0.6_petcf_0.2mm.inst.cfg index b33a4c38e3..170edd3f4a 100644 --- a/resources/quality/ultimaker_factor4/um_f4_cc0.6_petcf_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_cc0.6_petcf_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = CC 0.6 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.5 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.1 +gradual_flow_discretisation_step_size = 0.5 +gradual_flow_enabled = True +max_flow_acceleration = 0.1 cool_fan_speed_max = =cool_fan_speed infill_wall_line_count = 1 material_shrinkage_percentage = 100.15 diff --git a/resources/quality/ultimaker_factor4/um_f4_cc0.6_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_cc0.6_pla_0.2mm.inst.cfg index 8e4a105358..6f4055fb06 100644 --- a/resources/quality/ultimaker_factor4/um_f4_cc0.6_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_cc0.6_pla_0.2mm.inst.cfg @@ -13,9 +13,9 @@ variant = CC 0.6 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_cc0.6_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_cc0.6_pla_0.3mm.inst.cfg index a168b8f7d0..3adc4e0188 100644 --- a/resources/quality/ultimaker_factor4/um_f4_cc0.6_pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_cc0.6_pla_0.3mm.inst.cfg @@ -13,9 +13,9 @@ variant = CC 0.6 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 inset_direction = outside_in skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_ht0.6_cffpps_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_ht0.6_cffpps_0.2mm.inst.cfg index 8204135cc0..643d1dcc54 100644 --- a/resources/quality/ultimaker_factor4/um_f4_ht0.6_cffpps_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_ht0.6_cffpps_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = HT 0.6 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +max_flow_acceleration = 1 adhesion_type = brim infill_wall_line_count = 1 retraction_combing_max_distance = 2 diff --git a/resources/quality/ultimaker_factor4/um_f4_ht0.6_petcf_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_ht0.6_petcf_0.2mm.inst.cfg index aa4022bc5d..52f02abd2d 100644 --- a/resources/quality/ultimaker_factor4/um_f4_ht0.6_petcf_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_ht0.6_petcf_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = HT 0.6 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.5 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.1 +gradual_flow_discretisation_step_size = 0.5 +gradual_flow_enabled = True +max_flow_acceleration = 0.1 cool_fan_speed_max = =cool_fan_speed infill_wall_line_count = 1 material_shrinkage_percentage = 100.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg index fefbf8b615..2b3253ab70 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.25 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg index 94de34ad72..587a43bf5d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.25 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg index 4ed588e9e3..a7e9873401 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.25 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg index 7daf38b312..b367cdec47 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.25 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg index 89614bec9c..7f0eb2106e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg index 6716a2f504..7562a8b1c7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg index 10f0c211cf..ad5ae195a0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg index 829dd29d22..9e475d55bb 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg index c42fbd390e..2058db8daa 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg index 2ab5c2fbfb..b05a5e3c82 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg index e21e8ffdca..08a6d78f19 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg index 629f53baf9..8b9c9257be 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg index c155871f26..282808ba18 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg index 4c2671ff69..88221cbc14 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg index 163c3c400e..6d6bcacaf1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg index be380e6b23..4558feffb9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg index e53e2b3dbd..d6b5d9b76e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg index 7b75e78fb5..0ddebebc57 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg index 0ea189daf8..c016953b79 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg index 87c575b978..e4b5c5a40f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg index bcfad903cf..e4816099b9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg index 244309d77e..63da6728be 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg index eb5bdba073..89710d904a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg index efd4f4ecef..501487c11e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg index acddb2300a..095047399d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg index e7d9686a98..79984f2638 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg index 5b1795f87e..f64faffc50 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg index 913f3f96cb..d3590303bd 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg index cab1ac9ae6..a9991bf1b7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg index cf81658b7a..388a402734 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg index d5469d6378..317632d651 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg index c5bb22fb17..e3fc7fb4bc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg index 260fb5ba10..71b107c482 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg index c0919d2192..0387dc09a0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg index 3d3f3b9eed..b4b72b02b9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg index d0aad55cf3..6ba0cbc3c4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg index d5486c1a55..88ff2a6abf 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.25 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg index f2a9e39e7a..b446e207f0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.25 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg index 3fff3081c9..838d93dba8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.25 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-tough-pla_0.1mm.inst.cfg index 8168ef5278..be46b3bbb9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-tough-pla_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.25 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg index 4241f393e9..9a302b7c0d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg index cf38fd6c7e..aa48a2daa0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg index 8d0b516c7e..1d087c2ea4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg index 7ddd9784c9..3462394edb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg index 1f13c14837..4121412340 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm.inst.cfg index 1ae9940414..ff118d1b6d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg index ff9b960365..882e8b67be 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm.inst.cfg index aad464cb8a..6b276bb4f3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg index 2614301965..2d91de6889 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg index 731f07dd61..57caf7c9ae 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg index d1df42d929..f53049cd94 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg index 37c25af4f9..deac70962c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg index 4669dcb57f..3429dc0e40 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg index 7207ff17fa..f2e990ba88 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg index 19b344a1b0..aba0ec0808 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg index 347a2f6898..434e4aa944 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg index 6973077df4..53a6b2a038 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -1 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg index 86ed61ff0c..b0fc69beb2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = 0 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg index f0f022a0fa..8679b8852b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg index 82d20f7498..84002bc56c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.4 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg index 278ead1594..27235eb4ea 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg index 0d5d710e7b..f9dd9392dd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg index 8854b681d7..cb1b927e29 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg index dbff5632b7..edf9355c16 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg index c149805400..a04dbadcb7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg index 785f23c008..843c73227b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg index 9b3dbc2cf2..098b10d5b6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg index ded73ff086..cb88bb4143 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg index 9e435e175a..10e6cb8b22 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg index 757c7ce680..806a4b9d46 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -2 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg index a701865092..f6513c5873 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -3 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg index e68093c7b2..6932b8b7e5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg @@ -12,9 +12,9 @@ variant = AA 0.8 weight = -4 [values] -_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 -_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True -_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True +max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 From 3949b1a595dac25d01d856be4c92f5b5ce913cce Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Fri, 16 Aug 2024 15:15:50 +0200 Subject: [PATCH 4/6] Move gradual flow translations into classic translations CURA-12096 --- resources/i18n/cs_CZ/fdmprinter.def.json.po | 60 +++++++------- .../cs_CZ/gradual_flow_settings.def.json.po | 54 ------------- resources/i18n/de_DE/fdmprinter.def.json.po | 40 ++++++++++ .../de_DE/gradual_flow_settings.def.json.po | 53 ------------ resources/i18n/es_ES/fdmprinter.def.json.po | 40 ++++++++++ .../es_ES/gradual_flow_settings.def.json.po | 53 ------------ resources/i18n/fdmprinter.def.json.pot | 40 ++++++++++ .../fi_FI/gradual_flow_settings.def.json.po | 54 ------------- resources/i18n/fr_FR/fdmprinter.def.json.po | 40 ++++++++++ .../fr_FR/gradual_flow_settings.def.json.po | 53 ------------ .../i18n/gradual_flow_settings.def.json.pot | 58 -------------- .../hu_HU/gradual_flow_settings.def.json.po | 54 ------------- resources/i18n/it_IT/fdmprinter.def.json.po | 40 ++++++++++ .../it_IT/gradual_flow_settings.def.json.po | 53 ------------ resources/i18n/ja_JP/fdmprinter.def.json.po | 40 ++++++++++ .../ja_JP/gradual_flow_settings.def.json.po | 53 ------------ resources/i18n/ko_KR/fdmprinter.def.json.po | 40 ++++++++++ .../ko_KR/gradual_flow_settings.def.json.po | 53 ------------ resources/i18n/nl_NL/fdmprinter.def.json.po | 40 ++++++++++ .../nl_NL/gradual_flow_settings.def.json.po | 53 ------------ .../pl_PL/gradual_flow_settings.def.json.po | 54 ------------- resources/i18n/pt_BR/fdmprinter.def.json.po | 80 +++++++++---------- .../pt_BR/gradual_flow_settings.def.json.po | 55 ------------- resources/i18n/pt_PT/fdmprinter.def.json.po | 40 ++++++++++ .../pt_PT/gradual_flow_settings.def.json.po | 53 ------------ resources/i18n/ru_RU/fdmprinter.def.json.po | 40 ++++++++++ .../ru_RU/gradual_flow_settings.def.json.po | 53 ------------ resources/i18n/tr_TR/fdmprinter.def.json.po | 40 ++++++++++ .../tr_TR/gradual_flow_settings.def.json.po | 53 ------------ resources/i18n/zh_CN/fdmprinter.def.json.po | 40 ++++++++++ .../zh_CN/gradual_flow_settings.def.json.po | 53 ------------ .../zh_TW/gradual_flow_settings.def.json.po | 54 ------------- 32 files changed, 550 insertions(+), 1036 deletions(-) delete mode 100644 resources/i18n/cs_CZ/gradual_flow_settings.def.json.po delete mode 100644 resources/i18n/de_DE/gradual_flow_settings.def.json.po delete mode 100644 resources/i18n/es_ES/gradual_flow_settings.def.json.po delete mode 100644 resources/i18n/fi_FI/gradual_flow_settings.def.json.po delete mode 100644 resources/i18n/fr_FR/gradual_flow_settings.def.json.po delete mode 100644 resources/i18n/gradual_flow_settings.def.json.pot delete mode 100644 resources/i18n/hu_HU/gradual_flow_settings.def.json.po delete mode 100644 resources/i18n/it_IT/gradual_flow_settings.def.json.po delete mode 100644 resources/i18n/ja_JP/gradual_flow_settings.def.json.po delete mode 100644 resources/i18n/ko_KR/gradual_flow_settings.def.json.po delete mode 100644 resources/i18n/nl_NL/gradual_flow_settings.def.json.po delete mode 100644 resources/i18n/pl_PL/gradual_flow_settings.def.json.po delete mode 100644 resources/i18n/pt_BR/gradual_flow_settings.def.json.po delete mode 100644 resources/i18n/pt_PT/gradual_flow_settings.def.json.po delete mode 100644 resources/i18n/ru_RU/gradual_flow_settings.def.json.po delete mode 100644 resources/i18n/tr_TR/gradual_flow_settings.def.json.po delete mode 100644 resources/i18n/zh_CN/gradual_flow_settings.def.json.po delete mode 100644 resources/i18n/zh_TW/gradual_flow_settings.def.json.po diff --git a/resources/i18n/cs_CZ/fdmprinter.def.json.po b/resources/i18n/cs_CZ/fdmprinter.def.json.po index eb23f73c28..c2a02d7e40 100644 --- a/resources/i18n/cs_CZ/fdmprinter.def.json.po +++ b/resources/i18n/cs_CZ/fdmprinter.def.json.po @@ -5893,53 +5893,53 @@ msgstr "cestování" #~ msgid "Brim Only on Outside" #~ msgstr "Límec pouze venku" -#~ msgctxt "gradual_flow_discretisation_step_size description" -#~ msgid "Duration of each step in the gradual flow change" -#~ msgstr "Doba trvání každého kroku v postupné změně průtoku" +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "Doba trvání každého kroku v postupné změně průtoku" -#~ msgctxt "gradual_flow_enabled description" -#~ msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -#~ msgstr "Povolit postupné změny průtoku. Když je povoleno, průtok se postupně zvyšuje / snižuje na cílový průtok. Toto je užitečné pro tiskárny s Bowdenovou trubicí, kde se průtok okamžitě nezmění, když se spustí / zastaví extrudér." +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "Povolit postupné změny průtoku. Když je povoleno, průtok se postupně zvyšuje / snižuje na cílový průtok. Toto je užitečné pro tiskárny s Bowdenovou trubicí, kde se průtok okamžitě nezmění, když se spustí / zastaví extrudér." -#~ msgctxt "reset_flow_duration description" -#~ msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -#~ msgstr "Pro jakýkoli pohyb delší než tato hodnota se materiálový průtok resetuje na cílový průtok dráhy" +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "Pro jakýkoli pohyb delší než tato hodnota se materiálový průtok resetuje na cílový průtok dráhy" -#~ msgctxt "gradual_flow_discretisation_step_size label" -#~ msgid "Gradual flow discretisation step size" -#~ msgstr "Velikost kroku diskretizace postupné změny průtoku" +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "Velikost kroku diskretizace postupné změny průtoku" -#~ msgctxt "gradual_flow_enabled label" -#~ msgid "Gradual flow enabled" -#~ msgstr "Postupné změny průtoku povoleny" +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "Postupné změny průtoku povoleny" -#~ msgctxt "max_flow_acceleration label" -#~ msgid "Gradual flow max acceleration" -#~ msgstr "Maximální zrychlení postupných změn průtoku" +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "Maximální zrychlení postupných změn průtoku" -#~ msgctxt "layer_0_max_flow_acceleration label" -#~ msgid "Initial layer max flow acceleration" -#~ msgstr "Maximální zrychlení průtoku pro první vrstvu" +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "Maximální zrychlení průtoku pro první vrstvu" #~ msgctxt "layer_0_z_overlap description" #~ msgid "Make the first and second layer of the model overlap in the Z direction to compensate for the filament lost in the airgap. All models above the first model layer will be shifted down by this amount." #~ msgstr "První a druhá vrstva modelu se překrývají ve směru Z, aby se kompenzovalo vlákno ztracené ve vzduchové mezeře. Všechny modely nad první vrstvou modelu budou o tuto částku posunuty dolů." -#~ msgctxt "max_flow_acceleration description" -#~ msgid "Maximum acceleration for gradual flow changes" -#~ msgstr "Maximální zrychlení pro postupné změny průtoku" +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "Maximální zrychlení pro postupné změny průtoku" -#~ msgctxt "layer_0_max_flow_acceleration description" -#~ msgid "Minimum speed for gradual flow changes for the first layer" -#~ msgstr "Minimální rychlost pro postupné změny průtoku pro první vrstvu" +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "Minimální rychlost pro postupné změny průtoku pro první vrstvu" #~ msgctxt "brim_outside_only description" #~ msgid "Only print the brim on the outside of the model. This reduces the amount of brim you need to remove afterwards, while it doesn't reduce the bed adhesion that much." #~ msgstr "Límec tiskněte pouze na vnější stranu modelu. Tím se snižuje množství límce, který je třeba následně odstranit, zatímco to tolik nesnižuje přilnavost k podložce." -#~ msgctxt "reset_flow_duration label" -#~ msgid "Reset flow duration" -#~ msgstr "Doba trvání resetování průtoku" +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "Doba trvání resetování průtoku" #~ msgctxt "support_interface_skip_height label" #~ msgid "Support Interface Resolution" diff --git a/resources/i18n/cs_CZ/gradual_flow_settings.def.json.po b/resources/i18n/cs_CZ/gradual_flow_settings.def.json.po deleted file mode 100644 index 2529ed73e4..0000000000 --- a/resources/i18n/cs_CZ/gradual_flow_settings.def.json.po +++ /dev/null @@ -1,54 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: Uranium json setting files\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: 2024-03-11 11:28+0000\n" -"Last-Translator: Automatically generated\n" -"Language-Team: none\n" -"Language: en\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "" - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "" - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "" - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "" - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "" diff --git a/resources/i18n/de_DE/fdmprinter.def.json.po b/resources/i18n/de_DE/fdmprinter.def.json.po index 37b95d2d07..dc2fb4f21d 100644 --- a/resources/i18n/de_DE/fdmprinter.def.json.po +++ b/resources/i18n/de_DE/fdmprinter.def.json.po @@ -5860,3 +5860,43 @@ msgstr "Beim Drucken der ersten Schicht der Raft-Oberfläche verschieben Sie um msgctxt "z_seam_on_vertex label" msgid "Z Seam On Vertex" msgstr "Z-Naht auf Scheitelpunkt" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "Dauer jedes Schritts bei der sukzessiven Durchflusssänderung" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "Aktivieren Sie sukzessive Durchflussänderungen. Wenn diese Option aktiviert ist, wird der Durchfluss sukzessiv auf den angestrebten Durchfluss erhöht/verringert. Dies ist nützlich für Drucker mit einem Bowdenschlauch, bei denen der Durchfluss nicht sofort geändert wird, wenn der Extrudermotor startet/stoppt." + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "Für jede Verfahrbewegung, die länger als dieser Wert ist, wird der Materialfluss auf den Sollwegfluss zurückgesetzt." + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "Umfang des Diskretisierungsvorgangs bei sukzessivem Durchfluss" + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "Sukzessiver Durchfluss aktiviert" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "Maximale Beschleunigung bei sukzessivem Durchfluss" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "Maximale Durchflussbeschleunigung bei der Anfangsschicht" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "Maximale Beschleunigung für sukzessive Durchflussänderungen" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "Mindestgeschwindigkeit für sukzessive Durchflussänderungen bei der Anfangsschicht" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "Durchflussdauer zurücksetzen" diff --git a/resources/i18n/de_DE/gradual_flow_settings.def.json.po b/resources/i18n/de_DE/gradual_flow_settings.def.json.po deleted file mode 100644 index 3fac955623..0000000000 --- a/resources/i18n/de_DE/gradual_flow_settings.def.json.po +++ /dev/null @@ -1,53 +0,0 @@ -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE \n" -"Language: de_DE\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=n != 1;\n" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "Dauer jedes Schritts bei der sukzessiven Durchflusssänderung" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Aktivieren Sie sukzessive Durchflussänderungen. Wenn diese Option aktiviert ist, wird der Durchfluss sukzessiv auf den angestrebten Durchfluss erhöht/verringert. Dies ist nützlich für Drucker mit einem Bowdenschlauch, bei denen der Durchfluss nicht sofort geändert wird, wenn der Extrudermotor startet/stoppt." - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "Für jede Verfahrbewegung, die länger als dieser Wert ist, wird der Materialfluss auf den Sollwegfluss zurückgesetzt." - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "Umfang des Diskretisierungsvorgangs bei sukzessivem Durchfluss" - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "Sukzessiver Durchfluss aktiviert" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "Maximale Beschleunigung bei sukzessivem Durchfluss" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "Maximale Durchflussbeschleunigung bei der Anfangsschicht" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximale Beschleunigung für sukzessive Durchflussänderungen" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Mindestgeschwindigkeit für sukzessive Durchflussänderungen bei der Anfangsschicht" - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "Durchflussdauer zurücksetzen" diff --git a/resources/i18n/es_ES/fdmprinter.def.json.po b/resources/i18n/es_ES/fdmprinter.def.json.po index db2d43b4d8..662e6c372c 100644 --- a/resources/i18n/es_ES/fdmprinter.def.json.po +++ b/resources/i18n/es_ES/fdmprinter.def.json.po @@ -5860,3 +5860,43 @@ msgstr "Cuando se imprima la primera capa de la superficie del conjunto, convier msgctxt "z_seam_on_vertex label" msgid "Z Seam On Vertex" msgstr "Juntura Z en el vértice" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "Duración de cada intervalo en el cambio de flujo gradual" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "Habilite cambios de flujo gradual. Al habilitarse, el flujo se incrementa/decrementa gradualmente hasta el flujo objetivo. Esto es útil para impresoras con tubo bowden en las que el flujo no cambia inmediatamente cuando el motor extrusor arranca o se detiene." + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "Para cualquier movimiento de desplazamiento superior a este valor, el flujo material se restablece al flujo objetivo de las trayectorias" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "Tamaño del intervalo para discretización de flujo gradual" + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "Flujo gradual habilitado" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "Flujo gradual de aceleración máxima" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "Aceleración máxima de flujo de capa inicial" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "Aceleración máxima para cambios graduales de flujo" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "Velocidad mínima para cambios graduales de flujo en la primera capa" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "Restablecer duración de flujo" diff --git a/resources/i18n/es_ES/gradual_flow_settings.def.json.po b/resources/i18n/es_ES/gradual_flow_settings.def.json.po deleted file mode 100644 index 3437e28849..0000000000 --- a/resources/i18n/es_ES/gradual_flow_settings.def.json.po +++ /dev/null @@ -1,53 +0,0 @@ -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE \n" -"Language: es_ES\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=n != 1;\n" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "Duración de cada intervalo en el cambio de flujo gradual" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Habilite cambios de flujo gradual. Al habilitarse, el flujo se incrementa/decrementa gradualmente hasta el flujo objetivo. Esto es útil para impresoras con tubo bowden en las que el flujo no cambia inmediatamente cuando el motor extrusor arranca o se detiene." - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "Para cualquier movimiento de desplazamiento superior a este valor, el flujo material se restablece al flujo objetivo de las trayectorias" - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "Tamaño del intervalo para discretización de flujo gradual" - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "Flujo gradual habilitado" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "Flujo gradual de aceleración máxima" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "Aceleración máxima de flujo de capa inicial" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "Aceleración máxima para cambios graduales de flujo" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Velocidad mínima para cambios graduales de flujo en la primera capa" - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "Restablecer duración de flujo" diff --git a/resources/i18n/fdmprinter.def.json.pot b/resources/i18n/fdmprinter.def.json.pot index 89729e177d..8a09cf9129 100644 --- a/resources/i18n/fdmprinter.def.json.pot +++ b/resources/i18n/fdmprinter.def.json.pot @@ -5860,3 +5860,43 @@ msgctxt "mesh_rotation_matrix description" msgid "Transformation matrix to be applied to the model when loading it from file." msgstr "" +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "" + diff --git a/resources/i18n/fi_FI/gradual_flow_settings.def.json.po b/resources/i18n/fi_FI/gradual_flow_settings.def.json.po deleted file mode 100644 index 2529ed73e4..0000000000 --- a/resources/i18n/fi_FI/gradual_flow_settings.def.json.po +++ /dev/null @@ -1,54 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: Uranium json setting files\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: 2024-03-11 11:28+0000\n" -"Last-Translator: Automatically generated\n" -"Language-Team: none\n" -"Language: en\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "" - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "" - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "" - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "" - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "" diff --git a/resources/i18n/fr_FR/fdmprinter.def.json.po b/resources/i18n/fr_FR/fdmprinter.def.json.po index 6ebc9cfecb..7ae71602a3 100644 --- a/resources/i18n/fr_FR/fdmprinter.def.json.po +++ b/resources/i18n/fr_FR/fdmprinter.def.json.po @@ -5860,3 +5860,43 @@ msgstr "Lors de l'impression de la première couche de la surface du radeau, il msgctxt "z_seam_on_vertex label" msgid "Z Seam On Vertex" msgstr "Joint en Z sur le sommet" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "Durée de chaque pas dans la variation progressive du débit" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "Activer les variations de débit progressives. Lorsque cette option est activée, le débit est augmenté ou réduit progressivement jusqu'au débit souhaité. Cette option est utile pour les imprimantes avec un tube bowden où le débit n'est pas modifié immédiatement lorsque le moteur de l'extrudeur démarre ou s'arrête." + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "Pour tout déplacement supérieur à cette valeur, le débit de matière est réinitialisé au débit souhaité pour les trajectoires" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "Taille de pas de la discrétisation du débit progressif" + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "Débit progressif activé" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "Accélération progressive jusqu'au débit max" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "Accélération maximale du débit lors de la première couche" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "Accélération maximale pour les variations de débit progressives" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "Vitesse minimale pour les variations de débit progressives pour la première couche" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "Réinitialiser la durée du débit" diff --git a/resources/i18n/fr_FR/gradual_flow_settings.def.json.po b/resources/i18n/fr_FR/gradual_flow_settings.def.json.po deleted file mode 100644 index 6b1a40e614..0000000000 --- a/resources/i18n/fr_FR/gradual_flow_settings.def.json.po +++ /dev/null @@ -1,53 +0,0 @@ -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE \n" -"Language: fr_FR\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=n>1;\n" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "Durée de chaque pas dans la variation progressive du débit" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Activer les variations de débit progressives. Lorsque cette option est activée, le débit est augmenté ou réduit progressivement jusqu'au débit souhaité. Cette option est utile pour les imprimantes avec un tube bowden où le débit n'est pas modifié immédiatement lorsque le moteur de l'extrudeur démarre ou s'arrête." - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "Pour tout déplacement supérieur à cette valeur, le débit de matière est réinitialisé au débit souhaité pour les trajectoires" - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "Taille de pas de la discrétisation du débit progressif" - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "Débit progressif activé" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "Accélération progressive jusqu'au débit max" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "Accélération maximale du débit lors de la première couche" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "Accélération maximale pour les variations de débit progressives" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Vitesse minimale pour les variations de débit progressives pour la première couche" - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "Réinitialiser la durée du débit" diff --git a/resources/i18n/gradual_flow_settings.def.json.pot b/resources/i18n/gradual_flow_settings.def.json.pot deleted file mode 100644 index 7d9afba68f..0000000000 --- a/resources/i18n/gradual_flow_settings.def.json.pot +++ /dev/null @@ -1,58 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: Uranium json setting files\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" - - - - - - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "" - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "" - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "" - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "" - diff --git a/resources/i18n/hu_HU/gradual_flow_settings.def.json.po b/resources/i18n/hu_HU/gradual_flow_settings.def.json.po deleted file mode 100644 index 2529ed73e4..0000000000 --- a/resources/i18n/hu_HU/gradual_flow_settings.def.json.po +++ /dev/null @@ -1,54 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: Uranium json setting files\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: 2024-03-11 11:28+0000\n" -"Last-Translator: Automatically generated\n" -"Language-Team: none\n" -"Language: en\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "" - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "" - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "" - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "" - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "" diff --git a/resources/i18n/it_IT/fdmprinter.def.json.po b/resources/i18n/it_IT/fdmprinter.def.json.po index dab6b12a71..2efce196db 100644 --- a/resources/i18n/it_IT/fdmprinter.def.json.po +++ b/resources/i18n/it_IT/fdmprinter.def.json.po @@ -5860,3 +5860,43 @@ msgstr "Quando si stampa il primo strato della superficie del raft, traslare con msgctxt "z_seam_on_vertex label" msgid "Z Seam On Vertex" msgstr "Cucitura Z sul vertice" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "Durata di ogni gradino per la variazione graduale del flusso" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "Abilitare le variazioni graduali del flusso. Quando abilitate, il flusso viene aumentato/diminuito gradualmente fino al flusso target. Ciò è utile per le stampanti dotate di tubo bowden dove il flusso non viene modificato immediatamente all'avvio/arresto del motore dell'estrusore." + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "Per ogni spostamento del percorso superiore a questo valore, il flusso del materiale viene reimpostato su quello target dei percorsi." + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "Dimensione del gradino di discretizzazione del flusso graduale" + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "Flusso graduale abilitato" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "Accelerazione massima del flusso graduale" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "Accelerazione massima del flusso per lo strato iniziale" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "Accelerazione massima per le variazioni graduali del flusso" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "Velocità minima per le variazioni graduali del flusso per il primo strato." + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "Reimpostare la durata del flusso" diff --git a/resources/i18n/it_IT/gradual_flow_settings.def.json.po b/resources/i18n/it_IT/gradual_flow_settings.def.json.po deleted file mode 100644 index f3c4fca088..0000000000 --- a/resources/i18n/it_IT/gradual_flow_settings.def.json.po +++ /dev/null @@ -1,53 +0,0 @@ -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE \n" -"Language: it_IT\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=n != 1;\n" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "Durata di ogni gradino per la variazione graduale del flusso" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Abilitare le variazioni graduali del flusso. Quando abilitate, il flusso viene aumentato/diminuito gradualmente fino al flusso target. Ciò è utile per le stampanti dotate di tubo bowden dove il flusso non viene modificato immediatamente all'avvio/arresto del motore dell'estrusore." - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "Per ogni spostamento del percorso superiore a questo valore, il flusso del materiale viene reimpostato su quello target dei percorsi." - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "Dimensione del gradino di discretizzazione del flusso graduale" - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "Flusso graduale abilitato" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "Accelerazione massima del flusso graduale" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "Accelerazione massima del flusso per lo strato iniziale" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "Accelerazione massima per le variazioni graduali del flusso" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Velocità minima per le variazioni graduali del flusso per il primo strato." - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "Reimpostare la durata del flusso" diff --git a/resources/i18n/ja_JP/fdmprinter.def.json.po b/resources/i18n/ja_JP/fdmprinter.def.json.po index f0924c7ae8..9feb3284fe 100644 --- a/resources/i18n/ja_JP/fdmprinter.def.json.po +++ b/resources/i18n/ja_JP/fdmprinter.def.json.po @@ -5862,3 +5862,43 @@ msgstr "ラフトサーフェスの第1層をプリントする際に,このオ msgctxt "z_seam_on_vertex label" msgid "Z Seam On Vertex" msgstr "頂点のZシーム" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "段階的なフローの変化におけるステップごとの継続時間" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "段階的なフローの変化を有効にします。有効にすると,フローは目標フローまで段階的に増減します。これは,押し出しモーターの始動/停止時にフローがすぐに変化しないボーデンチューブを備えたプリンターに便利です。" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "この値より長い移動の場合,素材フローはパスの目標フローにリセットされます。" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "段階的なフローの離散化ステップのサイズ" + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "段階的なフローが有効" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "段階的なフローの最大加速度" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "初期層の最大フロー加速度" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "フローを段階的に変化させるための最大加速度" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "第1層のフローを段階的に変化させるための最低速度" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "フローの継続時間をリセット" diff --git a/resources/i18n/ja_JP/gradual_flow_settings.def.json.po b/resources/i18n/ja_JP/gradual_flow_settings.def.json.po deleted file mode 100644 index d8548e3849..0000000000 --- a/resources/i18n/ja_JP/gradual_flow_settings.def.json.po +++ /dev/null @@ -1,53 +0,0 @@ -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE \n" -"Language: ja_JP\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=1; plural=0;\n" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "段階的なフローの変化におけるステップごとの継続時間" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "段階的なフローの変化を有効にします。有効にすると,フローは目標フローまで段階的に増減します。これは,押し出しモーターの始動/停止時にフローがすぐに変化しないボーデンチューブを備えたプリンターに便利です。" - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "この値より長い移動の場合,素材フローはパスの目標フローにリセットされます。" - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "段階的なフローの離散化ステップのサイズ" - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "段階的なフローが有効" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "段階的なフローの最大加速度" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "初期層の最大フロー加速度" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "フローを段階的に変化させるための最大加速度" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "第1層のフローを段階的に変化させるための最低速度" - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "フローの継続時間をリセット" diff --git a/resources/i18n/ko_KR/fdmprinter.def.json.po b/resources/i18n/ko_KR/fdmprinter.def.json.po index 371c8badaf..778ecf3663 100644 --- a/resources/i18n/ko_KR/fdmprinter.def.json.po +++ b/resources/i18n/ko_KR/fdmprinter.def.json.po @@ -5860,3 +5860,43 @@ msgstr "래프트 서피스의 첫 번째 레이어를 인쇄 시, 해당 오프 msgctxt "z_seam_on_vertex label" msgid "Z Seam On Vertex" msgstr "버텍스 상의 Z 심" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "점진적 흐름 변경에서 각 단계의 지속 시간" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "점진적 흐름 변경을 활성화합니다. 활성화하면 흐름이 목표 흐름까지 점진적으로 증가/감소합니다. 이는 압출기 모터가 시작/정지될 때 흐름이 즉시 변경되지 않는 보우덴 튜브가 있는 프린터에 유용합니다." + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "이 값보다 긴 이동에 대해서는 재료 흐름이 경로 목표 흐름으로 재설정됩니다" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "점진적 흐름 이산화 단계 크기" + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "점진적 흐름 활성화됨" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "점진적 흐름 최대 가속" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "초기 레이어 최대 흐름 가속" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "점진적 흐름 변경에 대한 최대 가속" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "첫 번째 레이어의 점진적 흐름 변경에 대한 최소 속도" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "흐름 지속 시간 재설정" diff --git a/resources/i18n/ko_KR/gradual_flow_settings.def.json.po b/resources/i18n/ko_KR/gradual_flow_settings.def.json.po deleted file mode 100644 index 7b13d00199..0000000000 --- a/resources/i18n/ko_KR/gradual_flow_settings.def.json.po +++ /dev/null @@ -1,53 +0,0 @@ -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE \n" -"Language: ko_KR\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=1; plural=0;\n" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "점진적 흐름 변경에서 각 단계의 지속 시간" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "점진적 흐름 변경을 활성화합니다. 활성화하면 흐름이 목표 흐름까지 점진적으로 증가/감소합니다. 이는 압출기 모터가 시작/정지될 때 흐름이 즉시 변경되지 않는 보우덴 튜브가 있는 프린터에 유용합니다." - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "이 값보다 긴 이동에 대해서는 재료 흐름이 경로 목표 흐름으로 재설정됩니다" - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "점진적 흐름 이산화 단계 크기" - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "점진적 흐름 활성화됨" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "점진적 흐름 최대 가속" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "초기 레이어 최대 흐름 가속" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "점진적 흐름 변경에 대한 최대 가속" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "첫 번째 레이어의 점진적 흐름 변경에 대한 최소 속도" - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "흐름 지속 시간 재설정" diff --git a/resources/i18n/nl_NL/fdmprinter.def.json.po b/resources/i18n/nl_NL/fdmprinter.def.json.po index 1ff63009b6..ae67b0c910 100644 --- a/resources/i18n/nl_NL/fdmprinter.def.json.po +++ b/resources/i18n/nl_NL/fdmprinter.def.json.po @@ -5860,3 +5860,43 @@ msgstr "Bij het printen van de eerste laag van het raftoppervlak: gebruik deze o msgctxt "z_seam_on_vertex label" msgid "Z Seam On Vertex" msgstr "Z-naad op vertex" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "Duur van elke stap in de geleidelijke stroomverandering" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "Geleidelijke stroomwijzigingen inschakelen. Als deze optie is ingeschakeld, wordt de stroom geleidelijk verhoogd/verlaagd tot de doelstroom. Dit is handig voor printers met een bowdenbuis waarbij de stroom niet onmiddellijk verandert wanneer de extrudermotor start/stopt." + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "Voor elke af te leggen afstand die langer is dan deze waarde, wordt de materiaalstroom opnieuw ingesteld op de doelstroom van de paden." + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "Stapgrootte geleidelijke stroomdiscretisatie" + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "Geleidelijke stroom ingeschakeld" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "Maximale versnelling voor geleidelijke stroom" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "Maximale stroomversnelling eerste laag" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "Maximale versnelling voor geleidelijke stroomveranderingen" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "Minimumsnelheid voor geleidelijke stroomveranderingen voor de eerste laag" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "Stroomduur opnieuw instellen" diff --git a/resources/i18n/nl_NL/gradual_flow_settings.def.json.po b/resources/i18n/nl_NL/gradual_flow_settings.def.json.po deleted file mode 100644 index fcb179f9b3..0000000000 --- a/resources/i18n/nl_NL/gradual_flow_settings.def.json.po +++ /dev/null @@ -1,53 +0,0 @@ -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE \n" -"Language: nl_NL\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=n != 1;\n" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "Duur van elke stap in de geleidelijke stroomverandering" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Geleidelijke stroomwijzigingen inschakelen. Als deze optie is ingeschakeld, wordt de stroom geleidelijk verhoogd/verlaagd tot de doelstroom. Dit is handig voor printers met een bowdenbuis waarbij de stroom niet onmiddellijk verandert wanneer de extrudermotor start/stopt." - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "Voor elke af te leggen afstand die langer is dan deze waarde, wordt de materiaalstroom opnieuw ingesteld op de doelstroom van de paden." - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "Stapgrootte geleidelijke stroomdiscretisatie" - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "Geleidelijke stroom ingeschakeld" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "Maximale versnelling voor geleidelijke stroom" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "Maximale stroomversnelling eerste laag" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "Maximale versnelling voor geleidelijke stroomveranderingen" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Minimumsnelheid voor geleidelijke stroomveranderingen voor de eerste laag" - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "Stroomduur opnieuw instellen" diff --git a/resources/i18n/pl_PL/gradual_flow_settings.def.json.po b/resources/i18n/pl_PL/gradual_flow_settings.def.json.po deleted file mode 100644 index 2529ed73e4..0000000000 --- a/resources/i18n/pl_PL/gradual_flow_settings.def.json.po +++ /dev/null @@ -1,54 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: Uranium json setting files\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: 2024-03-11 11:28+0000\n" -"Last-Translator: Automatically generated\n" -"Language-Team: none\n" -"Language: en\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "" - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "" - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "" - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "" - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "" diff --git a/resources/i18n/pt_BR/fdmprinter.def.json.po b/resources/i18n/pt_BR/fdmprinter.def.json.po index d668c8841a..9a14afb3e8 100644 --- a/resources/i18n/pt_BR/fdmprinter.def.json.po +++ b/resources/i18n/pt_BR/fdmprinter.def.json.po @@ -5906,54 +5906,14 @@ msgstr "percurso" #~ msgid "Brim Only on Outside" #~ msgstr "Brim Somente Para Fora" -#~ msgctxt "gradual_flow_discretisation_step_size description" -#~ msgid "Duration of each step in the gradual flow change" -#~ msgstr "Duração de cada passo na alteração de fluxo gradual" - -#~ msgctxt "gradual_flow_enabled description" -#~ msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -#~ msgstr "Habilita mudanças graduais de fluxo. Quando habilitado, o fluxo é gradualmente aumentado ou reduzido para o fluxo alvo. Útil para impressoras com tubo bowden onde o fluxo não é imediatamente alterado quando o motor do extrusor inicia ou para." - -#~ msgctxt "reset_flow_duration description" -#~ msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -#~ msgstr "Para qualquer movimento mais longo que este valor, o fluxo material é resetado para o fluxo-alvo do percurso." - -#~ msgctxt "gradual_flow_discretisation_step_size label" -#~ msgid "Gradual flow discretisation step size" -#~ msgstr "Tamanho de passo da discretização de fluxo gradual" - -#~ msgctxt "gradual_flow_enabled label" -#~ msgid "Gradual flow enabled" -#~ msgstr "Fluxo gradual habilitado" - -#~ msgctxt "max_flow_acceleration label" -#~ msgid "Gradual flow max acceleration" -#~ msgstr "Aceleração máxima do fluxo gradual" - -#~ msgctxt "layer_0_max_flow_acceleration label" -#~ msgid "Initial layer max flow acceleration" -#~ msgstr "Aceleração máxima de fluxo da camada inicial" - #~ msgctxt "layer_0_z_overlap description" #~ msgid "Make the first and second layer of the model overlap in the Z direction to compensate for the filament lost in the airgap. All models above the first model layer will be shifted down by this amount." #~ msgstr "Faz a primeira e segunda camadas do modelo se sobreporem na direção Z para compensar pelo filamento perdido no vão aéreo. Todos os modelos acima da primeira camada de modelo serão deslocados para baixo por essa distância." -#~ msgctxt "max_flow_acceleration description" -#~ msgid "Maximum acceleration for gradual flow changes" -#~ msgstr "Aceleração máxima para alterações de fluxo gradual" - -#~ msgctxt "layer_0_max_flow_acceleration description" -#~ msgid "Minimum speed for gradual flow changes for the first layer" -#~ msgstr "Velocidade mínima para alterações graduais de fluxo na primeira camada" - #~ msgctxt "brim_outside_only description" #~ msgid "Only print the brim on the outside of the model. This reduces the amount of brim you need to remove afterwards, while it doesn't reduce the bed adhesion that much." #~ msgstr "Imprimir o Brim somente no lado de fora do modelo. Isto reduz a quantidade de brim a ser removida no final, e não reduz tanto a aderência à mesa." -#~ msgctxt "reset_flow_duration label" -#~ msgid "Reset flow duration" -#~ msgstr "Duração de reset do fluxo" - #~ msgctxt "support_interface_skip_height label" #~ msgid "Support Interface Resolution" #~ msgstr "Resolução da Interface de Suporte" @@ -5961,3 +5921,43 @@ msgstr "percurso" #~ msgctxt "support_interface_skip_height description" #~ msgid "When checking where there's model above and below the support, take steps of the given height. Lower values will slice slower, while higher values may cause normal support to be printed in some places where there should have been support interface." #~ msgstr "Quando verificar se há partes do modelo abaixo e acima do suporte, usar passos de dada altura. Valores baixos fatiarão mais lentamente, enquanto que valores altos farão com que suporte convencional seja impresso em lugares em que deveria haver interface de suporte." + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "Duração de cada passo na mudança gradual de fluxo" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "Habilita mudanças graduais de fluxo. Quando habilitado, o fluxo é gradualmente aumentado ou diminuído ao fluxo-alvo. Isto é útil para impressoras com tubo bowden em que o fluxo não é imediatamente alterado quando o motor de extrusor para ou inicia." + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "Para cada movimento de percurso menor que este valor, o fluxo de material é resetado para o fluxo-alvo dos caminhos" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "Tamanho de passo de discretização gradual de fluxo" + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "Fluxo gradual habilitado" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "Aceleração máximo de fluxo gradual" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "Aceleração máxima de fluxo da camada inicial" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "Aceleração máxima para mudanças de fluxo gradual" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "Velocidade mínima para mudanças de fluxo gradual da primeira camada" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "Duração de reset de fluxo" diff --git a/resources/i18n/pt_BR/gradual_flow_settings.def.json.po b/resources/i18n/pt_BR/gradual_flow_settings.def.json.po deleted file mode 100644 index 24b118429c..0000000000 --- a/resources/i18n/pt_BR/gradual_flow_settings.def.json.po +++ /dev/null @@ -1,55 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: Uranium json setting files\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: 2024-04-01 22:35+0200\n" -"Last-Translator: Cláudio Sampaio \n" -"Language-Team: none\n" -"Language: pt_BR\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=(n > 1);\n" -"X-Generator: Poedit 3.4.2\n" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "Duração de cada passo na mudança gradual de fluxo" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Habilita mudanças graduais de fluxo. Quando habilitado, o fluxo é gradualmente aumentado ou diminuído ao fluxo-alvo. Isto é útil para impressoras com tubo bowden em que o fluxo não é imediatamente alterado quando o motor de extrusor para ou inicia." - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "Para cada movimento de percurso menor que este valor, o fluxo de material é resetado para o fluxo-alvo dos caminhos" - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "Tamanho de passo de discretização gradual de fluxo" - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "Fluxo gradual habilitado" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "Aceleração máximo de fluxo gradual" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "Aceleração máxima de fluxo da camada inicial" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "Aceleração máxima para mudanças de fluxo gradual" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Velocidade mínima para mudanças de fluxo gradual da primeira camada" - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "Duração de reset de fluxo" diff --git a/resources/i18n/pt_PT/fdmprinter.def.json.po b/resources/i18n/pt_PT/fdmprinter.def.json.po index c00e46ef23..e7c9077cfb 100644 --- a/resources/i18n/pt_PT/fdmprinter.def.json.po +++ b/resources/i18n/pt_PT/fdmprinter.def.json.po @@ -5860,3 +5860,43 @@ msgstr "Ao imprimir a primeira camada da superfície da jangada, traduza por est msgctxt "z_seam_on_vertex label" msgid "Z Seam On Vertex" msgstr "Junta Z no vértice" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "Duração de cada etapa da mudança gradual de fluxo" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "Ativar alterações graduais de fluxo. Quando ativado, o fluxo é gradualmente aumentado/diminuído para o fluxo alvo. Isto é útil para impressoras com um tubo bowden em que o fluxo não é imediatamente alterado quando o motor da extrusora arranca/para." + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "Para qualquer deslocação superior a este valor, o fluxo de material é reposto no fluxo teórico das vias" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "Tamanho do passo de discretização do fluxo gradual" + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "Fluxo gradual ativado" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "Aceleração máxima do fluxo gradual" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "Aceleração do fluxo máximo da camada inicial" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "Aceleração máxima para mudanças graduais de fluxo" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "Velocidade mínima para mudanças graduais de fluxo para a primeira camada" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "Redefinir a duração do fluxo" diff --git a/resources/i18n/pt_PT/gradual_flow_settings.def.json.po b/resources/i18n/pt_PT/gradual_flow_settings.def.json.po deleted file mode 100644 index 28faebc914..0000000000 --- a/resources/i18n/pt_PT/gradual_flow_settings.def.json.po +++ /dev/null @@ -1,53 +0,0 @@ -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE \n" -"Language: pt_PT\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=n != 1;\n" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "Duração de cada etapa da mudança gradual de fluxo" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Ativar alterações graduais de fluxo. Quando ativado, o fluxo é gradualmente aumentado/diminuído para o fluxo alvo. Isto é útil para impressoras com um tubo bowden em que o fluxo não é imediatamente alterado quando o motor da extrusora arranca/para." - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "Para qualquer deslocação superior a este valor, o fluxo de material é reposto no fluxo teórico das vias" - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "Tamanho do passo de discretização do fluxo gradual" - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "Fluxo gradual ativado" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "Aceleração máxima do fluxo gradual" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "Aceleração do fluxo máximo da camada inicial" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "Aceleração máxima para mudanças graduais de fluxo" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Velocidade mínima para mudanças graduais de fluxo para a primeira camada" - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "Redefinir a duração do fluxo" diff --git a/resources/i18n/ru_RU/fdmprinter.def.json.po b/resources/i18n/ru_RU/fdmprinter.def.json.po index a0cc7af6d3..fe630270c6 100644 --- a/resources/i18n/ru_RU/fdmprinter.def.json.po +++ b/resources/i18n/ru_RU/fdmprinter.def.json.po @@ -5860,3 +5860,43 @@ msgstr "При печати первого слоя поверхности ра msgctxt "z_seam_on_vertex label" msgid "Z Seam On Vertex" msgstr "Z-шов на вершине" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "Продолжительность каждого шага изменения плавного потока" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "Включите изменения плавного потока. Если эта функция включена, поток постепенно увеличивается/уменьшается до целевого значения. Это полезно для принтеров с трубкой Боудена, где поток не меняется сразу при запуске/остановке двигателя экструдера." + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "Для любого перемещения, превышающего это значение, поток материала сбрасывается до целевого потока пути." + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "Размер шага дискретизации плавного потока" + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "Плавный поток включен" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "Максимальное ускорение плавного потока" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "Максимальное ускорение потока начального слоя" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "Максимальное ускорение для изменения плавного потока" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "Минимальная скорость изменения плавного потока для первого слоя" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "Сбросить продолжительность потока" diff --git a/resources/i18n/ru_RU/gradual_flow_settings.def.json.po b/resources/i18n/ru_RU/gradual_flow_settings.def.json.po deleted file mode 100644 index 6addfef87c..0000000000 --- a/resources/i18n/ru_RU/gradual_flow_settings.def.json.po +++ /dev/null @@ -1,53 +0,0 @@ -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE \n" -"Language: ru_RU\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "Продолжительность каждого шага изменения плавного потока" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Включите изменения плавного потока. Если эта функция включена, поток постепенно увеличивается/уменьшается до целевого значения. Это полезно для принтеров с трубкой Боудена, где поток не меняется сразу при запуске/остановке двигателя экструдера." - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "Для любого перемещения, превышающего это значение, поток материала сбрасывается до целевого потока пути." - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "Размер шага дискретизации плавного потока" - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "Плавный поток включен" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "Максимальное ускорение плавного потока" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "Максимальное ускорение потока начального слоя" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "Максимальное ускорение для изменения плавного потока" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "Минимальная скорость изменения плавного потока для первого слоя" - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "Сбросить продолжительность потока" diff --git a/resources/i18n/tr_TR/fdmprinter.def.json.po b/resources/i18n/tr_TR/fdmprinter.def.json.po index d58e746295..7bf31aa660 100644 --- a/resources/i18n/tr_TR/fdmprinter.def.json.po +++ b/resources/i18n/tr_TR/fdmprinter.def.json.po @@ -5860,3 +5860,43 @@ msgstr "Raft yüzeyinin ilk katmanını yazdırırken arayüz ve yüzey arasınd msgctxt "z_seam_on_vertex label" msgid "Z Seam On Vertex" msgstr "Tepe Noktasında Z Dikiş İzi" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "Kademeli akış değişimindeki her adımın süresi" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "Kademeli akış değişikliklerini etkinleştirin. Etkinleştirildiğinde akış, hedef akışa doğru kademeli olarak artırılır/azaltılır. Bu, akışın ekstrüder motoru çalıştığında/durduğunda hemen değişmediği bowden tüplü yazıcılar için kullanışlıdır." + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "Bu değerden daha uzun herhangi bir seyahat hareketi için malzeme akışı, hedef akış yollarına sıfırlanır" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "Kademeli akış ayrıklaştırma adım boyutu" + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "Kademeli akış etkinleştirildi" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "Kademeli akış maksimum ivme" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "İlk katman maksimum akış ivmesi" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "Kademeli akış değişiklikleri için maksimum ivme" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "İlk katman için kademeli akış değişiklikleri için minimum hız" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "Akış süresini sıfırla" diff --git a/resources/i18n/tr_TR/gradual_flow_settings.def.json.po b/resources/i18n/tr_TR/gradual_flow_settings.def.json.po deleted file mode 100644 index 8fd89fdcb9..0000000000 --- a/resources/i18n/tr_TR/gradual_flow_settings.def.json.po +++ /dev/null @@ -1,53 +0,0 @@ -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE \n" -"Language: tr_TR\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=n != 1;\n" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "Kademeli akış değişimindeki her adımın süresi" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "Kademeli akış değişikliklerini etkinleştirin. Etkinleştirildiğinde akış, hedef akışa doğru kademeli olarak artırılır/azaltılır. Bu, akışın ekstrüder motoru çalıştığında/durduğunda hemen değişmediği bowden tüplü yazıcılar için kullanışlıdır." - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "Bu değerden daha uzun herhangi bir seyahat hareketi için malzeme akışı, hedef akış yollarına sıfırlanır" - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "Kademeli akış ayrıklaştırma adım boyutu" - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "Kademeli akış etkinleştirildi" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "Kademeli akış maksimum ivme" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "İlk katman maksimum akış ivmesi" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "Kademeli akış değişiklikleri için maksimum ivme" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "İlk katman için kademeli akış değişiklikleri için minimum hız" - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "Akış süresini sıfırla" diff --git a/resources/i18n/zh_CN/fdmprinter.def.json.po b/resources/i18n/zh_CN/fdmprinter.def.json.po index c2887f13d4..d1a7b9fe52 100644 --- a/resources/i18n/zh_CN/fdmprinter.def.json.po +++ b/resources/i18n/zh_CN/fdmprinter.def.json.po @@ -5860,3 +5860,43 @@ msgstr "打印第一层木筏表面时,通过这个偏移来自定义筏底和 msgctxt "z_seam_on_vertex label" msgid "Z Seam On Vertex" msgstr "顶点上的 Z 形接缝" + +msgctxt "gradual_flow_discretisation_step_size description" +msgid "Duration of each step in the gradual flow change" +msgstr "渐变流量变化中每个步骤的持续时间" + +msgctxt "gradual_flow_enabled description" +msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." +msgstr "启用渐变流量变化。启用之后,流量将会逐渐增加/减少到目标流量。这对于带有波登管的打印机非常有用,因为当挤出机电机启动/停止时,流量并不会立即改变。" + +msgctxt "reset_flow_duration description" +msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" +msgstr "对于任何长于此值的移动,材料流量将被重置为路径的目标流量" + +msgctxt "gradual_flow_discretisation_step_size label" +msgid "Gradual flow discretisation step size" +msgstr "渐变流量离散化步长" + +msgctxt "gradual_flow_enabled label" +msgid "Gradual flow enabled" +msgstr "启用渐变流量" + +msgctxt "max_flow_acceleration label" +msgid "Gradual flow max acceleration" +msgstr "渐变流量最大加速度" + +msgctxt "layer_0_max_flow_acceleration label" +msgid "Initial layer max flow acceleration" +msgstr "初始层最大流量加速" + +msgctxt "max_flow_acceleration description" +msgid "Maximum acceleration for gradual flow changes" +msgstr "渐变流量变化的最大加速度" + +msgctxt "layer_0_max_flow_acceleration description" +msgid "Minimum speed for gradual flow changes for the first layer" +msgstr "第一层渐变流量变化的最小速度" + +msgctxt "reset_flow_duration label" +msgid "Reset flow duration" +msgstr "重置流量持续时间" diff --git a/resources/i18n/zh_CN/gradual_flow_settings.def.json.po b/resources/i18n/zh_CN/gradual_flow_settings.def.json.po deleted file mode 100644 index 188deec65f..0000000000 --- a/resources/i18n/zh_CN/gradual_flow_settings.def.json.po +++ /dev/null @@ -1,53 +0,0 @@ -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE \n" -"Language: zh_CN\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=1; plural=0;\n" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "渐变流量变化中每个步骤的持续时间" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "启用渐变流量变化。启用之后,流量将会逐渐增加/减少到目标流量。这对于带有波登管的打印机非常有用,因为当挤出机电机启动/停止时,流量并不会立即改变。" - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "对于任何长于此值的移动,材料流量将被重置为路径的目标流量" - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "渐变流量离散化步长" - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "启用渐变流量" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "渐变流量最大加速度" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "初始层最大流量加速" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "渐变流量变化的最大加速度" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "第一层渐变流量变化的最小速度" - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "重置流量持续时间" diff --git a/resources/i18n/zh_TW/gradual_flow_settings.def.json.po b/resources/i18n/zh_TW/gradual_flow_settings.def.json.po deleted file mode 100644 index 2529ed73e4..0000000000 --- a/resources/i18n/zh_TW/gradual_flow_settings.def.json.po +++ /dev/null @@ -1,54 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: Uranium json setting files\n" -"Report-Msgid-Bugs-To: plugins@ultimaker.com\n" -"POT-Creation-Date: 2024-03-11 11:28+0000\n" -"PO-Revision-Date: 2024-03-11 11:28+0000\n" -"Last-Translator: Automatically generated\n" -"Language-Team: none\n" -"Language: en\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" - -msgctxt "gradual_flow_discretisation_step_size description" -msgid "Duration of each step in the gradual flow change" -msgstr "" - -msgctxt "gradual_flow_enabled description" -msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops." -msgstr "" - -msgctxt "reset_flow_duration description" -msgid "For any travel move longer than this value, the material flow is reset to the paths target flow" -msgstr "" - -msgctxt "gradual_flow_discretisation_step_size label" -msgid "Gradual flow discretisation step size" -msgstr "" - -msgctxt "gradual_flow_enabled label" -msgid "Gradual flow enabled" -msgstr "" - -msgctxt "max_flow_acceleration label" -msgid "Gradual flow max acceleration" -msgstr "" - -msgctxt "layer_0_max_flow_acceleration label" -msgid "Initial layer max flow acceleration" -msgstr "" - -msgctxt "max_flow_acceleration description" -msgid "Maximum acceleration for gradual flow changes" -msgstr "" - -msgctxt "layer_0_max_flow_acceleration description" -msgid "Minimum speed for gradual flow changes for the first layer" -msgstr "" - -msgctxt "reset_flow_duration label" -msgid "Reset flow duration" -msgstr "" From f6da4d0776496842a66af4b9b2acd279b0d14f73 Mon Sep 17 00:00:00 2001 From: wawanbreton Date: Fri, 16 Aug 2024 13:17:18 +0000 Subject: [PATCH 5/6] Applied printer-linter format --- resources/definitions/fdmprinter.def.json | 19 ++++++++++++------- .../um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg | 2 +- ...3_aa0.4_um-abs_0.15mm_engineering.inst.cfg | 2 +- .../um_s3_aa0.4_um-abs_0.15mm_visual.inst.cfg | 2 +- ...s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg | 2 +- .../um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg | 2 +- ...s3_aa0.4_um-abs_0.2mm_engineering.inst.cfg | 2 +- .../um_s3_aa0.4_um-abs_0.2mm_quick.inst.cfg | 2 +- .../um_s3_aa0.4_um-abs_0.2mm_visual.inst.cfg | 2 +- .../um_s3_aa0.4_um-abs_0.3mm_quick.inst.cfg | 2 +- ...um_s3_aa0.4_um-petg_0.06mm_visual.inst.cfg | 2 +- ..._aa0.4_um-petg_0.15mm_engineering.inst.cfg | 2 +- ...um_s3_aa0.4_um-petg_0.15mm_visual.inst.cfg | 2 +- ...3_aa0.4_um-petg_0.1mm_engineering.inst.cfg | 2 +- .../um_s3_aa0.4_um-petg_0.1mm_visual.inst.cfg | 2 +- ...3_aa0.4_um-petg_0.2mm_engineering.inst.cfg | 2 +- .../um_s3_aa0.4_um-petg_0.2mm_quick.inst.cfg | 2 +- .../um_s3_aa0.4_um-petg_0.2mm_visual.inst.cfg | 2 +- .../um_s3_aa0.4_um-petg_0.3mm_quick.inst.cfg | 2 +- .../um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg | 2 +- ...3_aa0.4_um-pla_0.15mm_engineering.inst.cfg | 2 +- .../um_s3_aa0.4_um-pla_0.15mm_visual.inst.cfg | 2 +- ...s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg | 2 +- .../um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg | 2 +- ...s3_aa0.4_um-pla_0.2mm_engineering.inst.cfg | 2 +- .../um_s3_aa0.4_um-pla_0.2mm_quick.inst.cfg | 2 +- .../um_s3_aa0.4_um-pla_0.2mm_visual.inst.cfg | 2 +- .../um_s3_aa0.4_um-pla_0.3mm_quick.inst.cfg | 2 +- ..._aa0.4_um-tough-pla_0.06mm_visual.inst.cfg | 2 +- ...4_um-tough-pla_0.15mm_engineering.inst.cfg | 2 +- ..._aa0.4_um-tough-pla_0.15mm_visual.inst.cfg | 2 +- ....4_um-tough-pla_0.1mm_engineering.inst.cfg | 2 +- ...3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg | 2 +- ....4_um-tough-pla_0.2mm_engineering.inst.cfg | 2 +- ...s3_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg | 2 +- ...3_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg | 2 +- ...s3_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg | 2 +- ...s3_aa0.8_um-abs_0.2mm_engineering.inst.cfg | 2 +- .../um_s3_aa0.8_um-abs_0.2mm_quick.inst.cfg | 2 +- .../um_s3_aa0.8_um-abs_0.2mm_visual.inst.cfg | 2 +- .../um_s3_aa0.8_um-abs_0.3mm_quick.inst.cfg | 2 +- .../um_s3_aa0.8_um-abs_0.4mm_quick.inst.cfg | 2 +- ...3_aa0.8_um-petg_0.2mm_engineering.inst.cfg | 2 +- .../um_s3_aa0.8_um-petg_0.2mm_quick.inst.cfg | 2 +- .../um_s3_aa0.8_um-petg_0.2mm_visual.inst.cfg | 2 +- .../um_s3_aa0.8_um-petg_0.3mm_quick.inst.cfg | 2 +- .../um_s3_aa0.8_um-petg_0.4mm_quick.inst.cfg | 2 +- ...s3_aa0.8_um-pla_0.2mm_engineering.inst.cfg | 2 +- .../um_s3_aa0.8_um-pla_0.2mm_quick.inst.cfg | 2 +- .../um_s3_aa0.8_um-pla_0.2mm_visual.inst.cfg | 2 +- .../um_s3_aa0.8_um-pla_0.3mm_quick.inst.cfg | 2 +- .../um_s3_aa0.8_um-pla_0.4mm_quick.inst.cfg | 2 +- ....8_um-tough-pla_0.2mm_engineering.inst.cfg | 2 +- ...s3_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg | 2 +- ...3_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg | 2 +- ...s3_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg | 2 +- ...s3_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg | 2 +- .../um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg | 2 +- ...5_aa0.4_um-abs_0.15mm_engineering.inst.cfg | 2 +- .../um_s5_aa0.4_um-abs_0.15mm_visual.inst.cfg | 2 +- ...s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg | 2 +- .../um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg | 2 +- ...s5_aa0.4_um-abs_0.2mm_engineering.inst.cfg | 2 +- .../um_s5_aa0.4_um-abs_0.2mm_quick.inst.cfg | 2 +- .../um_s5_aa0.4_um-abs_0.2mm_visual.inst.cfg | 2 +- .../um_s5_aa0.4_um-abs_0.3mm_quick.inst.cfg | 2 +- ...um_s5_aa0.4_um-petg_0.06mm_visual.inst.cfg | 2 +- ..._aa0.4_um-petg_0.15mm_engineering.inst.cfg | 2 +- ...um_s5_aa0.4_um-petg_0.15mm_visual.inst.cfg | 2 +- ...5_aa0.4_um-petg_0.1mm_engineering.inst.cfg | 2 +- .../um_s5_aa0.4_um-petg_0.1mm_visual.inst.cfg | 2 +- ...5_aa0.4_um-petg_0.2mm_engineering.inst.cfg | 2 +- .../um_s5_aa0.4_um-petg_0.2mm_quick.inst.cfg | 2 +- .../um_s5_aa0.4_um-petg_0.2mm_visual.inst.cfg | 2 +- .../um_s5_aa0.4_um-petg_0.3mm_quick.inst.cfg | 2 +- .../um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg | 2 +- ...5_aa0.4_um-pla_0.15mm_engineering.inst.cfg | 2 +- .../um_s5_aa0.4_um-pla_0.15mm_visual.inst.cfg | 2 +- ...s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg | 2 +- .../um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg | 2 +- ...s5_aa0.4_um-pla_0.2mm_engineering.inst.cfg | 2 +- .../um_s5_aa0.4_um-pla_0.2mm_quick.inst.cfg | 2 +- .../um_s5_aa0.4_um-pla_0.2mm_visual.inst.cfg | 2 +- .../um_s5_aa0.4_um-pla_0.3mm_quick.inst.cfg | 2 +- ..._aa0.4_um-tough-pla_0.06mm_visual.inst.cfg | 2 +- ...4_um-tough-pla_0.15mm_engineering.inst.cfg | 2 +- ..._aa0.4_um-tough-pla_0.15mm_visual.inst.cfg | 2 +- ....4_um-tough-pla_0.1mm_engineering.inst.cfg | 2 +- ...5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg | 2 +- ....4_um-tough-pla_0.2mm_engineering.inst.cfg | 2 +- ...s5_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg | 2 +- ...5_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg | 2 +- ...s5_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg | 2 +- ...s5_aa0.8_um-abs_0.2mm_engineering.inst.cfg | 2 +- .../um_s5_aa0.8_um-abs_0.2mm_quick.inst.cfg | 2 +- .../um_s5_aa0.8_um-abs_0.2mm_visual.inst.cfg | 2 +- .../um_s5_aa0.8_um-abs_0.3mm_quick.inst.cfg | 2 +- .../um_s5_aa0.8_um-abs_0.4mm_quick.inst.cfg | 2 +- ...5_aa0.8_um-petg_0.2mm_engineering.inst.cfg | 2 +- .../um_s5_aa0.8_um-petg_0.2mm_quick.inst.cfg | 2 +- .../um_s5_aa0.8_um-petg_0.2mm_visual.inst.cfg | 2 +- .../um_s5_aa0.8_um-petg_0.3mm_quick.inst.cfg | 2 +- .../um_s5_aa0.8_um-petg_0.4mm_quick.inst.cfg | 2 +- ...s5_aa0.8_um-pla_0.2mm_engineering.inst.cfg | 2 +- .../um_s5_aa0.8_um-pla_0.2mm_quick.inst.cfg | 2 +- .../um_s5_aa0.8_um-pla_0.2mm_visual.inst.cfg | 2 +- .../um_s5_aa0.8_um-pla_0.3mm_quick.inst.cfg | 2 +- .../um_s5_aa0.8_um-pla_0.4mm_quick.inst.cfg | 2 +- ....8_um-tough-pla_0.2mm_engineering.inst.cfg | 2 +- ...s5_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg | 2 +- ...5_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg | 2 +- ...s5_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg | 2 +- ...s5_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg | 2 +- .../um_f4_aa0.25_petg_0.1mm.inst.cfg | 2 +- .../um_f4_aa0.25_pla_0.1mm.inst.cfg | 2 +- .../um_f4_aa0.25_tough-pla_0.1mm.inst.cfg | 2 +- .../um_f4_aa0.4_abs_0.2mm.inst.cfg | 2 +- .../um_f4_aa0.4_bam_0.15mm.inst.cfg | 6 +++--- .../um_f4_aa0.4_bam_0.1mm.inst.cfg | 6 +++--- .../um_f4_aa0.4_bam_0.2mm.inst.cfg | 6 +++--- .../um_f4_aa0.4_bam_0.3mm.inst.cfg | 6 +++--- .../um_f4_aa0.4_cpe-plus_0.2mm.inst.cfg | 2 +- .../um_f4_aa0.4_cpe_0.2mm.inst.cfg | 2 +- .../um_f4_aa0.4_nylon_0.2mm.inst.cfg | 2 +- .../um_f4_aa0.4_pc_0.2mm.inst.cfg | 2 +- .../um_f4_aa0.4_petg_0.1mm.inst.cfg | 2 +- .../um_f4_aa0.4_petg_0.2mm.inst.cfg | 2 +- .../um_f4_aa0.4_petg_0.3mm.inst.cfg | 2 +- .../um_f4_aa0.4_pla_0.1mm.inst.cfg | 2 +- .../um_f4_aa0.4_pla_0.2mm.inst.cfg | 2 +- .../um_f4_aa0.4_pla_0.3mm.inst.cfg | 2 +- .../um_f4_aa0.4_pp_0.2mm.inst.cfg | 4 ++-- .../um_f4_aa0.4_tough-pla_0.1mm.inst.cfg | 2 +- .../um_f4_aa0.4_tough-pla_0.2mm.inst.cfg | 2 +- .../um_f4_aa0.4_tough-pla_0.3mm.inst.cfg | 2 +- .../um_f4_aa0.4_tpu_0.2mm.inst.cfg | 2 +- .../um_f4_aa0.8_abs_0.2mm.inst.cfg | 2 +- .../um_f4_aa0.8_cpe_0.2mm.inst.cfg | 2 +- .../um_f4_aa0.8_nylon_0.2mm.inst.cfg | 2 +- .../um_f4_aa0.8_petg_0.2mm.inst.cfg | 2 +- .../um_f4_aa0.8_petg_0.4mm.inst.cfg | 2 +- .../um_f4_aa0.8_pla_0.2mm.inst.cfg | 2 +- .../um_f4_aa0.8_pla_0.4mm.inst.cfg | 2 +- .../um_f4_aa0.8_tough-pla_0.2mm.inst.cfg | 2 +- .../um_f4_aa0.8_tough-pla_0.4mm.inst.cfg | 2 +- .../um_f4_aa0.8_tpu_0.2mm.inst.cfg | 2 +- .../um_f4_bb0.4_pva_0.15mm.inst.cfg | 6 +++--- .../um_f4_bb0.4_pva_0.1mm.inst.cfg | 6 +++--- .../um_f4_bb0.4_pva_0.2mm.inst.cfg | 6 +++--- .../um_f4_bb0.4_pva_0.3mm.inst.cfg | 6 +++--- .../um_f4_bb0.8_pva_0.2mm.inst.cfg | 6 +++--- .../um_f4_bb0.8_pva_0.3mm.inst.cfg | 6 +++--- .../um_f4_bb0.8_pva_0.4mm.inst.cfg | 6 +++--- .../um_f4_cc0.4_petcf_0.2mm.inst.cfg | 4 ++-- .../um_f4_cc0.6_petcf_0.2mm.inst.cfg | 4 ++-- .../um_f4_cc0.6_pla_0.2mm.inst.cfg | 2 +- .../um_f4_cc0.6_pla_0.3mm.inst.cfg | 2 +- .../um_f4_ht0.6_cffpps_0.2mm.inst.cfg | 4 ++-- .../um_f4_ht0.6_petcf_0.2mm.inst.cfg | 4 ++-- .../um_s3_aa0.25_um-abs_0.1mm.inst.cfg | 6 +++--- .../um_s3_aa0.25_um-petg_0.1mm.inst.cfg | 6 +++--- .../um_s3_aa0.25_um-pla_0.1mm.inst.cfg | 6 +++--- .../um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-abs_0.06mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-abs_0.15mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-abs_0.1mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-abs_0.2mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-abs_0.3mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-petg_0.06mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-petg_0.15mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-petg_0.1mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-petg_0.2mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-petg_0.3mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-pla_0.06mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-pla_0.15mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-pla_0.1mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-pla_0.2mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-pla_0.3mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg | 6 +++--- .../um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg | 6 +++--- .../um_s3_aa0.8_um-abs_0.2mm.inst.cfg | 6 +++--- .../um_s3_aa0.8_um-abs_0.3mm.inst.cfg | 6 +++--- .../um_s3_aa0.8_um-abs_0.4mm.inst.cfg | 6 +++--- .../um_s3_aa0.8_um-petg_0.2mm.inst.cfg | 6 +++--- .../um_s3_aa0.8_um-petg_0.3mm.inst.cfg | 6 +++--- .../um_s3_aa0.8_um-petg_0.4mm.inst.cfg | 6 +++--- .../um_s3_aa0.8_um-pla_0.2mm.inst.cfg | 6 +++--- .../um_s3_aa0.8_um-pla_0.3mm.inst.cfg | 6 +++--- .../um_s3_aa0.8_um-pla_0.4mm.inst.cfg | 6 +++--- .../um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg | 6 +++--- .../um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg | 6 +++--- .../um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg | 6 +++--- .../um_s5_aa0.25_um-abs_0.1mm.inst.cfg | 6 +++--- .../um_s5_aa0.25_um-petg_0.1mm.inst.cfg | 6 +++--- .../um_s5_aa0.25_um-pla_0.1mm.inst.cfg | 6 +++--- .../um_s5_aa0.25_um-tough-pla_0.1mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-abs_0.06mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-abs_0.15mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-abs_0.1mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-abs_0.2mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-abs_0.3mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-petg_0.06mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-petg_0.15mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-petg_0.1mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-petg_0.2mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-petg_0.3mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-pla_0.06mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-pla_0.15mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-pla_0.1mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-pla_0.2mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-pla_0.3mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg | 6 +++--- .../um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg | 6 +++--- .../um_s5_aa0.8_um-abs_0.2mm.inst.cfg | 6 +++--- .../um_s5_aa0.8_um-abs_0.3mm.inst.cfg | 6 +++--- .../um_s5_aa0.8_um-abs_0.4mm.inst.cfg | 6 +++--- .../um_s5_aa0.8_um-petg_0.2mm.inst.cfg | 6 +++--- .../um_s5_aa0.8_um-petg_0.3mm.inst.cfg | 6 +++--- .../um_s5_aa0.8_um-petg_0.4mm.inst.cfg | 6 +++--- .../um_s5_aa0.8_um-pla_0.2mm.inst.cfg | 6 +++--- .../um_s5_aa0.8_um-pla_0.3mm.inst.cfg | 6 +++--- .../um_s5_aa0.8_um-pla_0.4mm.inst.cfg | 6 +++--- .../um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg | 6 +++--- .../um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg | 6 +++--- .../um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg | 6 +++--- 231 files changed, 413 insertions(+), 408 deletions(-) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 4796453293..79e40d56c4 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -766,7 +766,8 @@ "settable_per_extruder": false, "settable_per_meshgroup": false }, - "reset_flow_duration": { + "reset_flow_duration": + { "enabled": "gradual_flow_enabled", "value": 2.0, "label": "Reset flow duration", @@ -3149,7 +3150,8 @@ "settable_per_mesh": false, "settable_per_extruder": true }, - "gradual_flow_enabled": { + "gradual_flow_enabled": + { "label": "Gradual flow enabled", "description": "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts/stops.", "type": "bool", @@ -3157,12 +3159,13 @@ "settable_per_mesh": false, "settable_per_extruder": true }, - "max_flow_acceleration": { + "max_flow_acceleration": + { "enabled": "gradual_flow_enabled", "label": "Gradual flow max acceleration", "description": "Maximum acceleration for gradual flow changes", "type": "float", - "unit": "mm\u00b3\/s\u00b2", + "unit": "mm\u00b3/s\u00b2", "default_value": 1, "minimum_value_warning": 0.1, "maximum_value_warning": 99999, @@ -3171,13 +3174,14 @@ "settable_per_extruder": true, "comments": "when enabled, each second the flow will at max be increased/decreased by this value" }, - "layer_0_max_flow_acceleration": { + "layer_0_max_flow_acceleration": + { "enabled": "gradual_flow_enabled", "value": "max_flow_acceleration", "label": "Initial layer max flow acceleration", "description": "Minimum speed for gradual flow changes for the first layer", "type": "float", - "unit": "mm\u00b3\/s\u00b2", + "unit": "mm\u00b3/s\u00b2", "default_value": 1, "minimum_value_warning": 0.1, "maximum_value_warning": 99999, @@ -3185,7 +3189,8 @@ "settable_per_mesh": false, "settable_per_extruder": true }, - "gradual_flow_discretisation_step_size": { + "gradual_flow_discretisation_step_size": + { "enabled": "gradual_flow_enabled", "label": "Gradual flow discretisation step size", "description": "Duration of each step in the gradual flow change", diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg index b564c7313b..1e753b709f 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_engineering.inst.cfg index f1b0afec9b..8c7c905efc 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_visual.inst.cfg index 11562ae1fb..1a0270a2d6 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg index e2431286fb..e48adbd359 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg index cb291e4d22..772f5f3b5f 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_engineering.inst.cfg index 8ff65ade01..feb3ed912c 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_quick.inst.cfg index 156f1dd1a0..93ed657adc 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.4 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_visual.inst.cfg index 8f970ac316..8db25985f2 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm_quick.inst.cfg index 380b625c98..9b411e9537 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.4 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm_visual.inst.cfg index d163b3e2ed..cd3723ae12 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_engineering.inst.cfg index a32d5b5ca3..f56a12ccd5 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_visual.inst.cfg index 5c1bd3ed28..d1bd9c3d19 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg index 735b36bb68..b3122bb558 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_visual.inst.cfg index d70042b46e..b4b831828e 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_engineering.inst.cfg index bcf0b9b822..9092ec0763 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_quick.inst.cfg index c3c1809677..fa7ae3769d 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.4 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_visual.inst.cfg index a8a196148b..8e081833b8 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm_quick.inst.cfg index 0b67c38f13..e947a85a49 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.4 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg index b385396256..a52c5e9ab2 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_engineering.inst.cfg index f7706dd7b3..e56f5b3654 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_visual.inst.cfg index 2ff9e8f910..1400f9be38 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg index 26971b07d4..e77d171c1f 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg index 0b47f98be0..4d47697a81 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_engineering.inst.cfg index a165acd3fb..1f63abd0a0 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_quick.inst.cfg index ae7a71ee42..0a7bf91f91 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.4 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_visual.inst.cfg index 33b2f9ff41..054bbe216c 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm_quick.inst.cfg index f04fb58285..837caa6364 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.4 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg index f6495c4d78..59057404ba 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg index a62516cc0f..07d71edeca 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg index 2f2606c692..831e3f9153 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg index 6902355015..2287978d4b 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg index f09d2d31f4..c73cc61b0a 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg index 66f1128335..717ba0f470 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg index 9bbbf9ce00..1d9571d438 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.4 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg index 56aed4eef5..32fbfb238d 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg index e5686e5d39..1c49a0c6a1 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.4 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_engineering.inst.cfg index 66b710fc46..44970d9291 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.8 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_quick.inst.cfg index e339629142..399f738a59 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_visual.inst.cfg index 66caea2738..ae2fe0a914 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.8 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm_quick.inst.cfg index 924d47f199..4e1f306768 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm_quick.inst.cfg index 5fd296d93b..2cb242399d 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_engineering.inst.cfg index a02ae0f040..15b362e1fe 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.8 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_quick.inst.cfg index f0b0e296aa..d1a15b77a9 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_visual.inst.cfg index c1450e6f11..73628b8b81 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.8 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm_quick.inst.cfg index 3f6de1cf17..f8c47b7ebf 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm_quick.inst.cfg index 361d479df5..795ce12794 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_engineering.inst.cfg index a9081a6c0a..06d1c6a428 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.8 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_quick.inst.cfg index edd834071a..b0372a8323 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_visual.inst.cfg index 405be88f85..74dc24a600 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.8 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm_quick.inst.cfg index d5dbeba9fc..8c08d82b9a 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm_quick.inst.cfg index 404c31f71e..f7f666afe5 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg index c86f485e43..c3f5932ea7 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.8 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg index ab5c443ae3..adf505c728 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg index b427f2f52d..8bbc9fc4c4 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.8 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg index cdc79118ed..22c8e4c446 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg index 90adf96269..897d30978d 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg index adec4d27a5..a9d3028429 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_engineering.inst.cfg index 4e7b98a666..0d11537558 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_visual.inst.cfg index 7907a9b54e..a42fa7db7e 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg index 40b13faf07..487726e73d 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg index 51f3d28cd0..be663c0a78 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_engineering.inst.cfg index 3af0b045b0..dd4a05a622 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_quick.inst.cfg index b6dceac3ab..b1dec2d9b2 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.4 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_visual.inst.cfg index ddc8d4cc80..a58d62fdca 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm_quick.inst.cfg index c8293680c5..aa304b9e23 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.4 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm_visual.inst.cfg index 050c24f486..fe7a8eb0fa 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_engineering.inst.cfg index aab72b9586..1f708d6b2a 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_visual.inst.cfg index 10d2359596..996c9e853b 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_engineering.inst.cfg index 154068e75b..1008436a4a 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_visual.inst.cfg index 1b9f5362d0..7ca248bf43 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_engineering.inst.cfg index a5ec24936c..15391221cc 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_quick.inst.cfg index 6a1e1341ac..50acde656a 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.4 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_visual.inst.cfg index 2e38d3edf0..16d7ecc5f6 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm_quick.inst.cfg index 494b7564f7..100fcabd0d 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.4 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg index cfd6c67cf8..52ee35cb85 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_engineering.inst.cfg index 297f663a08..a2d2a11274 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_visual.inst.cfg index 78c3a117b4..7378ebd4ae 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg index f68cb81b20..4c267c3244 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg index 9ef2567d5f..34206cde02 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_engineering.inst.cfg index c36bc2cfef..ccdc99233e 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_quick.inst.cfg index b95ba9a53e..bc059f536a 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.4 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_visual.inst.cfg index 97ade11274..e0511a9319 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm_quick.inst.cfg index bc8e48e420..304f30ec9e 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.4 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg index 3b356743ea..e48171a12a 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg index d417eed137..b4dc0b021d 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg index d420bdc315..4dd1ad681b 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg index c7c7d7b2a7..8bc5205951 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg index c0d79948fb..c609823cae 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg index 645892c120..43ef55f44b 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg index 0943b483cc..1c74429109 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.4 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg index 9a59c5a90c..4a297b1c60 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.4 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg index 7bcea7b25a..7a50c54724 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.4 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_engineering.inst.cfg index 28587cd917..073a1be60c 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.8 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_quick.inst.cfg index 4c0324761e..57bdd71b43 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_visual.inst.cfg index ea1f8c442b..53c272de4b 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.8 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm_quick.inst.cfg index 9f8b32dc27..701ebfa4fe 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm_quick.inst.cfg index e6c8962ab9..2eb8cd1942 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_engineering.inst.cfg index 63cee911e4..75d640e177 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.8 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_quick.inst.cfg index d1aef1f7bb..47f946a89d 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_visual.inst.cfg index b250a12dc9..a8b446cd3d 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.8 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm_quick.inst.cfg index 5615252dbd..801adab4aa 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm_quick.inst.cfg index f75225b75e..7922fbfb7c 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_engineering.inst.cfg index 774500d9b9..5ae6042076 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.8 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_quick.inst.cfg index 8df66c064d..f327ff9fb8 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_visual.inst.cfg index 81da60bfb7..95302a6578 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.8 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm_quick.inst.cfg index b05d4c2aad..26e9837df4 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm_quick.inst.cfg index 82bec9cd26..099a265920 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg index 341dca024b..c0966adb2a 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg @@ -12,10 +12,10 @@ type = intent variant = AA 0.8 [values] -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 20 jerk_print = 30 +max_flow_acceleration = 1 speed_infill = =speed_print speed_print = 35 speed_roofing = =speed_topbottom diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg index 134bcb896f..58b78defb4 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg index 8cc4526dba..1ea845e0b9 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg @@ -12,11 +12,11 @@ type = intent variant = AA 0.8 [values] -max_flow_acceleration = 0.5 acceleration_print = 2500 acceleration_wall_0 = 1000 inset_direction = inside_out jerk_wall_0 = 20 +max_flow_acceleration = 0.5 speed_print = 50 speed_roofing = =math.ceil(speed_wall*(35/50)) speed_wall_0 = =math.ceil(speed_wall*(20/50)) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg index 461f1128b3..54ee602bdd 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg index c919d1a546..5324df80b5 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg @@ -12,8 +12,8 @@ type = intent variant = AA 0.8 [values] -gradual_flow_enabled = False acceleration_wall_0 = 2000 +gradual_flow_enabled = False gradual_infill_step_height = =4 * layer_height gradual_infill_steps = 3 infill_sparse_density = 40 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.25_petg_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.25_petg_0.1mm.inst.cfg index 654b19912b..bbb9d0f6e1 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.25_petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.25_petg_0.1mm.inst.cfg @@ -14,7 +14,7 @@ weight = 0 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.25_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.25_pla_0.1mm.inst.cfg index ddc63dba42..3709b1fb9c 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.25_pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.25_pla_0.1mm.inst.cfg @@ -14,7 +14,7 @@ weight = 0 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.25_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.25_tough-pla_0.1mm.inst.cfg index a36ead8204..185d5b9f22 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.25_tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.25_tough-pla_0.1mm.inst.cfg @@ -14,7 +14,7 @@ weight = 0 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_abs_0.2mm.inst.cfg index cdd4ff4075..307af32184 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_abs_0.2mm.inst.cfg @@ -14,8 +14,8 @@ weight = -2 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.93 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.15mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.15mm.inst.cfg index 98d4073c24..bb10a276a2 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.15mm.inst.cfg @@ -12,13 +12,13 @@ variant = AA 0.4 weight = -1 [values] -gradual_flow_discretisation_step_size = 0.1 -gradual_flow_enabled = True -max_flow_acceleration = 1 brim_replaces_support = False build_volume_temperature = =50 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True machine_nozzle_heat_up_speed = 1.56 +max_flow_acceleration = 1 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_material_flow = =material_flow * 0.965 support_angle = 45 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.1mm.inst.cfg index 9fbef3cc80..946e1d73a3 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.1mm.inst.cfg @@ -12,14 +12,14 @@ variant = AA 0.4 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.1 -gradual_flow_enabled = True -max_flow_acceleration = 1 brim_replaces_support = False build_volume_temperature = =50 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True machine_nozzle_heat_up_speed = 1.56 material_print_temperature = =default_material_print_temperature - 5 +max_flow_acceleration = 1 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_material_flow = =material_flow * 0.965 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.2mm.inst.cfg index 94b2bba250..fbc7ac702c 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.2mm.inst.cfg @@ -12,13 +12,13 @@ variant = AA 0.4 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.1 -gradual_flow_enabled = True -max_flow_acceleration = 1 brim_replaces_support = False build_volume_temperature = =50 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True machine_nozzle_heat_up_speed = 1.56 +max_flow_acceleration = 1 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_material_flow = =material_flow * 0.965 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.3mm.inst.cfg index 11cb5c0af6..338533ee03 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.3mm.inst.cfg @@ -12,13 +12,13 @@ variant = AA 0.4 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.1 -gradual_flow_enabled = True -max_flow_acceleration = 1 brim_replaces_support = False build_volume_temperature = =50 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True machine_nozzle_heat_up_speed = 1.56 +max_flow_acceleration = 1 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_material_flow = =material_flow * 0.965 speed_print = 50 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_cpe-plus_0.2mm.inst.cfg index 781bfb1bea..d788d72111 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_cpe-plus_0.2mm.inst.cfg @@ -14,8 +14,8 @@ weight = -2 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.93 speed_print = 80 wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_cpe_0.2mm.inst.cfg index 15dc271153..f121a419f1 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_cpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_cpe_0.2mm.inst.cfg @@ -14,8 +14,8 @@ weight = -2 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_nylon_0.2mm.inst.cfg index d26adc9108..9bae566648 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_nylon_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_nylon_0.2mm.inst.cfg @@ -14,8 +14,8 @@ weight = -2 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pc_0.2mm.inst.cfg index 5d9cf3041f..5ce773528b 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pc_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pc_0.2mm.inst.cfg @@ -14,8 +14,8 @@ weight = -2 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 speed_print = 80 wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.1mm.inst.cfg index 912fe13555..5dc170dd46 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.1mm.inst.cfg @@ -14,9 +14,9 @@ weight = 0 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in material_print_temperature = =default_material_print_temperature - 10 +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.2mm.inst.cfg index c515323cb5..decc1b6846 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.2mm.inst.cfg @@ -14,8 +14,8 @@ weight = -2 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.3mm.inst.cfg index 6e3d48d868..46d802a0c6 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_petg_0.3mm.inst.cfg @@ -14,8 +14,8 @@ weight = -3 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.1mm.inst.cfg index 21dc393666..ab89cfa7b0 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.1mm.inst.cfg @@ -14,8 +14,8 @@ weight = 0 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.93 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.2mm.inst.cfg index 0ed49fe031..85ef72980e 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.2mm.inst.cfg @@ -14,8 +14,8 @@ weight = -2 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.93 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.3mm.inst.cfg index efd521f6bb..8493737087 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pla_0.3mm.inst.cfg @@ -14,9 +14,9 @@ weight = -3 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in material_print_temperature = =default_material_print_temperature + 15 +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.93 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pp_0.2mm.inst.cfg index 3b54454dfc..ddf058629a 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_pp_0.2mm.inst.cfg @@ -12,11 +12,11 @@ variant = AA 0.4 weight = -2 [values] +brim_width = 20 gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 -brim_width = 20 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.1mm.inst.cfg index c9a48c4dfb..bbaa81e380 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.1mm.inst.cfg @@ -14,8 +14,8 @@ weight = 0 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.2mm.inst.cfg index 0351fe25b9..e3f13bb208 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.2mm.inst.cfg @@ -14,8 +14,8 @@ weight = -2 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.3mm.inst.cfg index 92ba952865..59b7f0cc0d 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_tough-pla_0.3mm.inst.cfg @@ -14,9 +14,9 @@ weight = -3 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in material_print_temperature = =default_material_print_temperature + 15 +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_tpu_0.2mm.inst.cfg index 0a01955877..a68fb26c1a 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_tpu_0.2mm.inst.cfg @@ -14,10 +14,10 @@ weight = -2 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 50 else 'cross_3d' infill_sparse_density = 10 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.9 skin_material_flow_layer_0 = 90 speed_layer_0 = 20 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_abs_0.2mm.inst.cfg index a72036c7c6..fb1e113270 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_abs_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_cpe_0.2mm.inst.cfg index d2f1166ac6..4f9bf33860 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_cpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_cpe_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_nylon_0.2mm.inst.cfg index cebb307e08..c2c1c74379 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_nylon_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_nylon_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_petg_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_petg_0.2mm.inst.cfg index 83d4c9db82..411fe42d59 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_petg_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_petg_0.4mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_petg_0.4mm.inst.cfg index 810ec4b7e7..22b06849b2 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_petg_0.4mm.inst.cfg @@ -14,7 +14,7 @@ weight = -4 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_pla_0.2mm.inst.cfg index 26eddbe482..885f39e5f1 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_pla_0.2mm.inst.cfg @@ -14,9 +14,9 @@ weight = -2 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in material_print_temperature = =default_material_print_temperature + 15 +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.93 speed_print = 50 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_pla_0.4mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_pla_0.4mm.inst.cfg index d4ef31be27..fb86282cf6 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_pla_0.4mm.inst.cfg @@ -14,9 +14,9 @@ weight = -4 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in material_print_temperature = =default_material_print_temperature + 15 +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.93 speed_print = 50 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tough-pla_0.2mm.inst.cfg index 3faaa01606..89ad814e07 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tough-pla_0.2mm.inst.cfg @@ -14,9 +14,9 @@ weight = -2 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in material_print_temperature = =default_material_print_temperature + 15 +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 speed_print = 50 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tough-pla_0.4mm.inst.cfg index 5cb0d7506c..381df3a6e9 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tough-pla_0.4mm.inst.cfg @@ -14,9 +14,9 @@ weight = -4 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in material_print_temperature = =default_material_print_temperature + 15 +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.965 speed_print = 50 diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.2mm.inst.cfg index d5bd1c08db..c3291f77a1 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.2mm.inst.cfg @@ -14,10 +14,10 @@ weight = -2 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 50 else 'cross_3d' infill_sparse_density = 10 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.9 skin_material_flow_layer_0 = 90 speed_layer_0 = 20 diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.15mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.15mm.inst.cfg index 9705db21e1..3294a3a150 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.15mm.inst.cfg @@ -12,15 +12,15 @@ variant = BB 0.4 weight = -1 [values] -gradual_flow_discretisation_step_size = 0.1 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_support_bottom = 100 acceleration_support_interface = 1500 brim_replaces_support = False build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True initial_layer_line_width_factor = 150 +max_flow_acceleration = 1 minimum_support_area = 4 prime_tower_min_volume = 15 skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg index 0dfae8bd2d..0f10e4f507 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg @@ -12,15 +12,15 @@ variant = BB 0.4 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.1 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_support_bottom = 100 acceleration_support_interface = 1500 brim_replaces_support = False build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True initial_layer_line_width_factor = 150 +max_flow_acceleration = 1 minimum_support_area = 4 prime_tower_min_volume = 15 skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg index e29f829c46..ef920e6fd7 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg @@ -12,15 +12,15 @@ variant = BB 0.4 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.1 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_support_bottom = 100 acceleration_support_interface = 1500 brim_replaces_support = False build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True initial_layer_line_width_factor = 150 +max_flow_acceleration = 1 minimum_support_area = 4 prime_tower_min_volume = 15 skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg index 5221b2ba51..4165a27a58 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg @@ -12,15 +12,15 @@ variant = BB 0.4 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.1 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_support_bottom = 100 acceleration_support_interface = 1500 brim_replaces_support = False build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True initial_layer_line_width_factor = 150 +max_flow_acceleration = 1 minimum_support_area = 4 prime_tower_min_volume = 15 skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg index a3aee5c410..2963265eec 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg @@ -12,15 +12,15 @@ variant = BB 0.8 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.1 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_support_bottom = 100 acceleration_support_interface = 1500 brim_replaces_support = False build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True initial_layer_line_width_factor = 150 +max_flow_acceleration = 1 minimum_support_area = 4 prime_tower_min_volume = 15 skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg index c0b5405c16..0a1437fd30 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg @@ -12,15 +12,15 @@ variant = BB 0.8 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.1 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_support_bottom = 100 acceleration_support_interface = 1500 brim_replaces_support = False build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True initial_layer_line_width_factor = 150 +max_flow_acceleration = 1 minimum_support_area = 4 prime_tower_min_volume = 15 skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg index 55d35b554e..edd837f8fc 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg @@ -12,15 +12,15 @@ variant = BB 0.8 weight = -4 [values] -gradual_flow_discretisation_step_size = 0.1 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_support_bottom = 100 acceleration_support_interface = 1500 brim_replaces_support = False build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True initial_layer_line_width_factor = 150 +max_flow_acceleration = 1 minimum_support_area = 4 prime_tower_min_volume = 15 skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_cc0.4_petcf_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_cc0.4_petcf_0.2mm.inst.cfg index efb681510a..1b5ae5b4a1 100644 --- a/resources/quality/ultimaker_factor4/um_f4_cc0.4_petcf_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_cc0.4_petcf_0.2mm.inst.cfg @@ -12,13 +12,13 @@ variant = CC 0.4 weight = -2 [values] +cool_fan_speed_max = =cool_fan_speed gradual_flow_discretisation_step_size = 0.5 gradual_flow_enabled = True -max_flow_acceleration = 0.1 -cool_fan_speed_max = =cool_fan_speed infill_wall_line_count = 1 material_shrinkage_percentage = 100.15 material_shrinkage_percentage_z = 100.15 +max_flow_acceleration = 0.1 skin_material_flow = =material_flow * 0.93 speed_print = 60 xy_offset = =machine_nozzle_size * -0.25 diff --git a/resources/quality/ultimaker_factor4/um_f4_cc0.6_petcf_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_cc0.6_petcf_0.2mm.inst.cfg index 170edd3f4a..0b1fa30c04 100644 --- a/resources/quality/ultimaker_factor4/um_f4_cc0.6_petcf_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_cc0.6_petcf_0.2mm.inst.cfg @@ -12,13 +12,13 @@ variant = CC 0.6 weight = -2 [values] +cool_fan_speed_max = =cool_fan_speed gradual_flow_discretisation_step_size = 0.5 gradual_flow_enabled = True -max_flow_acceleration = 0.1 -cool_fan_speed_max = =cool_fan_speed infill_wall_line_count = 1 material_shrinkage_percentage = 100.15 material_shrinkage_percentage_z = 100.15 +max_flow_acceleration = 0.1 skin_material_flow = =material_flow * 0.93 speed_print = 60 xy_offset = =machine_nozzle_size * -0.25 diff --git a/resources/quality/ultimaker_factor4/um_f4_cc0.6_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_cc0.6_pla_0.2mm.inst.cfg index 6f4055fb06..89fd1dc556 100644 --- a/resources/quality/ultimaker_factor4/um_f4_cc0.6_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_cc0.6_pla_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_cc0.6_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_cc0.6_pla_0.3mm.inst.cfg index 3adc4e0188..eff621dcc3 100644 --- a/resources/quality/ultimaker_factor4/um_f4_cc0.6_pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_cc0.6_pla_0.3mm.inst.cfg @@ -15,7 +15,7 @@ weight = -3 [values] gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 inset_direction = outside_in +max_flow_acceleration = 1 skin_material_flow = =material_flow * 0.93 diff --git a/resources/quality/ultimaker_factor4/um_f4_ht0.6_cffpps_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_ht0.6_cffpps_0.2mm.inst.cfg index 643d1dcc54..875b7a06a0 100644 --- a/resources/quality/ultimaker_factor4/um_f4_ht0.6_cffpps_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_ht0.6_cffpps_0.2mm.inst.cfg @@ -12,11 +12,11 @@ variant = HT 0.6 weight = -2 [values] +adhesion_type = brim gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True -max_flow_acceleration = 1 -adhesion_type = brim infill_wall_line_count = 1 +max_flow_acceleration = 1 retraction_combing_max_distance = 2 skin_material_flow = =material_flow * 0.93 speed_print = 60 diff --git a/resources/quality/ultimaker_factor4/um_f4_ht0.6_petcf_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_ht0.6_petcf_0.2mm.inst.cfg index 52f02abd2d..90249026a4 100644 --- a/resources/quality/ultimaker_factor4/um_f4_ht0.6_petcf_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_ht0.6_petcf_0.2mm.inst.cfg @@ -12,13 +12,13 @@ variant = HT 0.6 weight = -2 [values] +cool_fan_speed_max = =cool_fan_speed gradual_flow_discretisation_step_size = 0.5 gradual_flow_enabled = True -max_flow_acceleration = 0.1 -cool_fan_speed_max = =cool_fan_speed infill_wall_line_count = 1 material_shrinkage_percentage = 100.15 material_shrinkage_percentage_z = 100.15 +max_flow_acceleration = 0.1 skin_material_flow = =material_flow * 0.93 speed_print = 60 xy_offset = =machine_nozzle_size * -0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg index 2b3253ab70..a84295c169 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.25 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -29,6 +26,8 @@ bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_fan_speed_0 = 0 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ jerk_wall_0 = =max(30, speed_wall_0/2) machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg index 587a43bf5d..054bcf2b44 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.25 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -40,6 +39,7 @@ jerk_wall_0 = =max(30, speed_wall_0/2) machine_nozzle_cool_down_speed = 1.4 machine_nozzle_heat_up_speed = 1.7 material_extrusion_cool_down_speed = 0.7 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = False retraction_amount = 8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg index a7e9873401..6cb160cbef 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.25 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -40,6 +39,7 @@ jerk_wall_0 = =max(30, speed_wall_0/2) machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 +max_flow_acceleration = 2 optimize_wall_printing_order = False raft_airgap = 0.25 retraction_amount = 6.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg index b367cdec47..f1b85fc195 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.25 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -40,6 +39,7 @@ jerk_wall_0 = =max(30, speed_wall_0/2) machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 +max_flow_acceleration = 2 optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg index 7f0eb2106e..602fe454b2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = 1 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg index 7562a8b1c7..a349a726af 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -1 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 +max_flow_acceleration = 1 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg index ad5ae195a0..9ca4211c14 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg index 9e475d55bb..36778c2c61 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_material_flow = =1.05 * material_flow infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 @@ -43,6 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 +max_flow_acceleration = 1 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg index 2058db8daa..55cf6e1567 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -42,6 +41,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 7 +max_flow_acceleration = 1 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg index b05a5e3c82..fc111b08c5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = 1 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.4 machine_nozzle_heat_up_speed = 1.7 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 20 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = False retraction_amount = 8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg index 08a6d78f19..3e9b93f899 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -1 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.4 machine_nozzle_heat_up_speed = 1.7 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 20 +max_flow_acceleration = 1 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg index 8b9c9257be..43e91a53bc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.4 machine_nozzle_heat_up_speed = 1.7 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 20 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = False retraction_amount = 8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg index 282808ba18..4d2ca6a1b1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_material_flow = =1.1 * material_flow infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 @@ -43,6 +42,7 @@ machine_nozzle_heat_up_speed = 1.7 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 +max_flow_acceleration = 1 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg index 88221cbc14..e8155d504f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -42,6 +41,7 @@ machine_nozzle_heat_up_speed = 1.7 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 +max_flow_acceleration = 1 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg index 6d6bcacaf1..ae0b95e9a5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = 1 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 +max_flow_acceleration = 2 optimize_wall_printing_order = False raft_airgap = 0.25 retraction_amount = 6.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg index 4558feffb9..f1fcd1845b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -1 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 +max_flow_acceleration = 2 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg index d6b5d9b76e..d562e3da55 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 +max_flow_acceleration = 2 optimize_wall_printing_order = False raft_airgap = 0.25 retraction_amount = 6.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg index 0ddebebc57..e12b58fc5e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_material_flow = =1.1 * material_flow infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 @@ -43,6 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 material_print_temperature = =default_material_print_temperature + 5 +max_flow_acceleration = 2 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg index c016953b79..53c19ef901 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -42,6 +41,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 material_print_temperature = =default_material_print_temperature + 10 +max_flow_acceleration = 2 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg index e4b5c5a40f..4fe9eb1058 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = 1 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 +max_flow_acceleration = 2 optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg index e4816099b9..7a8bb668c5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -1 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 +max_flow_acceleration = 2 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg index 63da6728be..afc9e7f629 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 +max_flow_acceleration = 2 optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg index 89710d904a..b14d3228d7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_material_flow = =1.1 * material_flow infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 @@ -42,6 +41,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 +max_flow_acceleration = 2 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg index 501487c11e..2dc9b448cb 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -42,6 +41,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 material_print_temperature = =default_material_print_temperature + 5 +max_flow_acceleration = 2 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg index 095047399d..f81a8e8036 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -30,6 +27,8 @@ bridge_sparse_infill_max_density = 50 bridge_wall_material_flow = 200 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -45,6 +44,7 @@ material_extrusion_cool_down_speed = 0.8 material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 5 +max_flow_acceleration = 1 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg index 79984f2638..c32d5a2ced 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -43,6 +42,7 @@ material_extrusion_cool_down_speed = 0.8 material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 7 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = True raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg index f64faffc50..7b53c58c63 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -4 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -43,6 +42,7 @@ material_extrusion_cool_down_speed = 0.8 material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 10 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = True raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg index d3590303bd..6d29fb456b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -30,6 +27,8 @@ bridge_sparse_infill_max_density = 50 bridge_wall_material_flow = 200 bridge_wall_speed = 20 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -45,6 +44,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 +max_flow_acceleration = 1 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg index a9991bf1b7..846849481f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -30,6 +27,8 @@ bridge_sparse_infill_max_density = 50 bridge_wall_material_flow = 100 bridge_wall_speed = 20 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -45,6 +44,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = True retraction_amount = 3.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg index 388a402734..fe03ad75e0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -4 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -30,6 +27,8 @@ bridge_sparse_infill_max_density = 50 bridge_wall_material_flow = 100 bridge_wall_speed = 20 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -45,6 +44,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = True retraction_amount = 3.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg index 317632d651..6008ccfd82 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -30,6 +27,8 @@ bridge_sparse_infill_max_density = 50 bridge_wall_material_flow = 200 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -45,6 +44,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 10 +max_flow_acceleration = 2 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg index e3fc7fb4bc..f41ed952ba 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -43,6 +42,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 10 +max_flow_acceleration = 2 optimize_wall_printing_order = False raft_airgap = 0.25 retraction_amount = 4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg index 71b107c482..ab876bc815 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -4 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -43,6 +42,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 15 +max_flow_acceleration = 2 optimize_wall_printing_order = False raft_airgap = 0.25 retraction_amount = 4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg index 0387dc09a0..86acb0e63e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -30,6 +27,8 @@ bridge_sparse_infill_max_density = 50 bridge_wall_material_flow = 200 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -45,6 +44,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 10 +max_flow_acceleration = 2 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg index b4b72b02b9..f7fc9ae731 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -43,6 +42,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 15 +max_flow_acceleration = 2 optimize_wall_printing_order = False prime_tower_enable = True raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg index 6ba0cbc3c4..cf55675d59 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -4 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -43,6 +42,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 15 +max_flow_acceleration = 2 optimize_wall_printing_order = False prime_tower_enable = True raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg index 88ff2a6abf..d968c3f056 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.25 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -29,6 +26,8 @@ bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_fan_speed_0 = 0 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ jerk_wall_0 = =max(30, speed_wall_0/2) machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg index b446e207f0..78e41e520b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.25 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -40,6 +39,7 @@ jerk_wall_0 = =max(30, speed_wall_0/2) machine_nozzle_cool_down_speed = 1.4 machine_nozzle_heat_up_speed = 1.7 material_extrusion_cool_down_speed = 0.7 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = False retraction_amount = 8 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg index 838d93dba8..34ceff41c4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.25 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -40,6 +39,7 @@ jerk_wall_0 = =max(30, speed_wall_0/2) machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 +max_flow_acceleration = 2 optimize_wall_printing_order = False raft_airgap = 0.25 retraction_amount = 6.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-tough-pla_0.1mm.inst.cfg index be46b3bbb9..b9b5fb5a0f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-tough-pla_0.1mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.25 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -40,6 +39,7 @@ jerk_wall_0 = =max(30, speed_wall_0/2) machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 +max_flow_acceleration = 2 optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg index 9a302b7c0d..2654bd2d40 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = 1 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg index aa48a2daa0..f4e10c3833 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -1 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 +max_flow_acceleration = 1 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg index 1d087c2ea4..13d8b3c4ef 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg index 3462394edb..2f690ce044 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_material_flow = =1.05 * material_flow infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 @@ -43,6 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 +max_flow_acceleration = 1 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg index 4121412340..fe4fb9cdd1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -42,6 +41,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 7 +max_flow_acceleration = 1 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm.inst.cfg index ff118d1b6d..386745d6e9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = 1 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.4 machine_nozzle_heat_up_speed = 1.7 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 20 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = False retraction_amount = 8 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg index 882e8b67be..8fbbf3b6b8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -1 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.4 machine_nozzle_heat_up_speed = 1.7 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 20 +max_flow_acceleration = 1 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm.inst.cfg index 6b276bb4f3..9333073ede 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.4 machine_nozzle_heat_up_speed = 1.7 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 20 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = False retraction_amount = 8 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg index 2d91de6889..79bdcf5b20 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_material_flow = =1.1 * material_flow infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 @@ -43,6 +42,7 @@ machine_nozzle_heat_up_speed = 1.7 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 +max_flow_acceleration = 1 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg index 57caf7c9ae..21079c5b3f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -42,6 +41,7 @@ machine_nozzle_heat_up_speed = 1.7 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 +max_flow_acceleration = 1 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg index f53049cd94..93bb855a80 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = 1 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 +max_flow_acceleration = 2 optimize_wall_printing_order = False raft_airgap = 0.25 retraction_amount = 6.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg index deac70962c..8100de75aa 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -1 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 +max_flow_acceleration = 2 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg index 3429dc0e40..223e74c38d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 +max_flow_acceleration = 2 optimize_wall_printing_order = False raft_airgap = 0.25 retraction_amount = 6.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg index f2e990ba88..539732d456 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_material_flow = =1.1 * material_flow infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 @@ -43,6 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 material_print_temperature = =default_material_print_temperature + 5 +max_flow_acceleration = 2 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg index aba0ec0808..f5f0a531a8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -42,6 +41,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 material_print_temperature = =default_material_print_temperature + 10 +max_flow_acceleration = 2 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg index 434e4aa944..8878caf4c7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = 1 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 +max_flow_acceleration = 2 optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg index 53a6b2a038..702d91f3b9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -1 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 +max_flow_acceleration = 2 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg index b0fc69beb2..0d18de8d71 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = 0 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -41,6 +40,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 +max_flow_acceleration = 2 optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg index 8679b8852b..5078538dc6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_material_flow = =1.1 * material_flow infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 @@ -42,6 +41,7 @@ machine_nozzle_cool_down_speed = 1.3 machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 +max_flow_acceleration = 2 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg index 84002bc56c..7d96d6abb8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.4 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -42,6 +41,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 material_print_temperature = =default_material_print_temperature + 5 +max_flow_acceleration = 2 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg index 27235eb4ea..eba4ace386 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -30,6 +27,8 @@ bridge_sparse_infill_max_density = 50 bridge_wall_material_flow = 200 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -45,6 +44,7 @@ material_extrusion_cool_down_speed = 0.8 material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 5 +max_flow_acceleration = 1 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg index f9dd9392dd..2838efbdd7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -43,6 +42,7 @@ material_extrusion_cool_down_speed = 0.8 material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 7 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = True raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg index cb1b927e29..e703fb64d1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -4 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -43,6 +42,7 @@ material_extrusion_cool_down_speed = 0.8 material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 10 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = True raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg index edf9355c16..5b6bd77b61 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -30,6 +27,8 @@ bridge_sparse_infill_max_density = 50 bridge_wall_material_flow = 200 bridge_wall_speed = 20 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -45,6 +44,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 +max_flow_acceleration = 1 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg index a04dbadcb7..c19e138144 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -30,6 +27,8 @@ bridge_sparse_infill_max_density = 50 bridge_wall_material_flow = 100 bridge_wall_speed = 20 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -45,6 +44,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = True retraction_amount = 3.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg index 843c73227b..d5b889e61a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -4 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 1 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -30,6 +27,8 @@ bridge_sparse_infill_max_density = 50 bridge_wall_material_flow = 100 bridge_wall_speed = 20 cool_min_layer_time = 4 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -45,6 +44,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 +max_flow_acceleration = 1 optimize_wall_printing_order = False prime_tower_enable = True retraction_amount = 3.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg index 098b10d5b6..78d63336fe 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -30,6 +27,8 @@ bridge_sparse_infill_max_density = 50 bridge_wall_material_flow = 200 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -45,6 +44,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 10 +max_flow_acceleration = 2 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg index cb88bb4143..4c2089a98b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -43,6 +42,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 10 +max_flow_acceleration = 2 optimize_wall_printing_order = False raft_airgap = 0.25 retraction_amount = 4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg index 10e6cb8b22..dc6bf3ebf6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -4 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -43,6 +42,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 15 +max_flow_acceleration = 2 optimize_wall_printing_order = False raft_airgap = 0.25 retraction_amount = 4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg index 806a4b9d46..766194ac04 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -2 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -30,6 +27,8 @@ bridge_sparse_infill_max_density = 50 bridge_wall_material_flow = 200 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -45,6 +44,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 10 +max_flow_acceleration = 2 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg index f6513c5873..00b743dec2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -3 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -43,6 +42,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 15 +max_flow_acceleration = 2 optimize_wall_printing_order = False prime_tower_enable = True raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg index 6932b8b7e5..676ec0d8af 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg @@ -12,9 +12,6 @@ variant = AA 0.8 weight = -4 [values] -gradual_flow_discretisation_step_size = 0.2 -gradual_flow_enabled = True -max_flow_acceleration = 2 acceleration_infill = =acceleration_print acceleration_ironing = 1000 acceleration_layer_0 = =acceleration_wall_0 @@ -28,6 +25,8 @@ bridge_skin_speed = =bridge_wall_speed bridge_sparse_infill_max_density = 50 bridge_wall_speed = 30 cool_min_layer_time = 6 +gradual_flow_discretisation_step_size = 0.2 +gradual_flow_enabled = True infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' infill_sparse_density = 15 jerk_infill = =jerk_print @@ -43,6 +42,7 @@ material_extrusion_cool_down_speed = 0.7 material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 15 +max_flow_acceleration = 2 optimize_wall_printing_order = False prime_tower_enable = True raft_airgap = 0.25 From 5a3ced550d9ed5b065f31c07b43e0090fb69e213 Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Fri, 16 Aug 2024 16:05:53 +0200 Subject: [PATCH 6/6] Remove extra file cleaning in conanfile.py CURA-12096 This was apparently only useful for the gradual flow plugin. Advised by @jellespijker. --- conanfile.py | 2 -- 1 file changed, 2 deletions(-) diff --git a/conanfile.py b/conanfile.py index f21f7b40b8..999cca3362 100644 --- a/conanfile.py +++ b/conanfile.py @@ -511,8 +511,6 @@ echo "CURA_APP_NAME={{ cura_app_name }}" >> ${{ env_prefix }}GITHUB_ENV copy(self, "requirement*.txt", src = self.source_folder, dst = os.path.join(self.package_folder, self.cpp.package.resdirs[-1])) copy(self, "*", src = os.path.join(self.source_folder, "packaging"), dst = os.path.join(self.package_folder, self.cpp.package.resdirs[2])) - rm(self, "bundled_*.json", os.path.join(self.package_folder, self.cpp.package.resdirs[0], "bundled_packages"), recursive = False) - # Remove the fdm_materials from the package rmdir(self, os.path.join(self.package_folder, self.cpp.package.resdirs[0], "materials"))