diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json
index dc01b0e585..d6b3405d2b 100644
--- a/resources/definitions/fdmprinter.def.json
+++ b/resources/definitions/fdmprinter.def.json
@@ -1142,6 +1142,7 @@
                     "label": "Wall Distribution Count",
                     "description": "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width.",
                     "type": "int",
+                    "maximum_value": "999999",
                     "default_value": 1,
                     "minimum_value": "1",
                     "enabled": "beading_strategy_type == 'inward_distributed'"
@@ -1433,6 +1434,7 @@
                     "minimum_value": "0",
                     "maximum_value_warning": "top_layers - 1",
                     "type": "int",
+                    "maximum_value": "999999",
                     "value": "0",
                     "limit_to_extruder": "roofing_extruder_nr",
                     "settable_per_mesh": true,
@@ -1486,6 +1488,7 @@
                                     "default_value": 8,
                                     "minimum_value": "0",
                                     "maximum_value_warning": "100",
+                                    "maximum_value": "999999",
                                     "type": "int",
                                     "minimum_value_warning": "2",
                                     "value": "0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))",
@@ -1516,6 +1519,7 @@
                                     "minimum_value": "0",
                                     "minimum_value_warning": "2",
                                     "default_value": 6,
+                                    "maximum_value": "999999",
                                     "type": "int",
                                     "value": "999999 if infill_sparse_density == 100 else math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))",
                                     "limit_to_extruder": "top_bottom_extruder_nr",
@@ -1527,6 +1531,7 @@
                                     "description": "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number.",
                                     "minimum_value": "0",
                                     "minimum_value_warning": "2",
+                                    "maximum_value": "999999",
                                     "default_value": 6,
                                     "type": "int",
                                     "value": "bottom_layers",
@@ -2048,6 +2053,7 @@
                     "description": "Convert each infill line to this many lines. The extra lines do not cross over each other, but avoid each other. This makes the infill stiffer, but increases print time and material usage.",
                     "default_value": 1,
                     "type": "int",
+                    "maximum_value": "999999",
                     "minimum_value": "1",
                     "maximum_value_warning": "infill_line_distance / infill_line_width",
                     "enabled": "infill_sparse_density > 0 and infill_pattern != 'zigzag' and (gradual_infill_steps == 0 or not zig_zaggify_infill)",
@@ -2233,6 +2239,7 @@
                               "minimum_value": "0",
                               "maximum_value_warning": "10",
                               "type": "int",
+                              "maximum_value": "999999",
                               "value": "math.ceil(round(skin_edge_support_thickness / resolveOrValue('infill_sparse_thickness'), 4))",
                               "limit_to_extruder": "infill_extruder_nr",
                               "enabled": "infill_sparse_density > 0",
@@ -3257,6 +3264,7 @@
                     "default_value": 2,
                     "resolve": "round(sum(extruderValues('speed_slowdown_layers')) / len(extruderValues('speed_slowdown_layers')))",
                     "minimum_value": "0",
+                    "maximum_value": "999999",
                     "maximum_value_warning": "3.2 / resolveOrValue('layer_height')",
                     "settable_per_mesh": false,
                     "settable_per_extruder": false