diff --git a/resources/quality/rigid3d_base/abs/rigid3d_base_abs_adaptive.inst.cfg b/resources/quality/rigid3d_base/abs/rigid3d_base_abs_adaptive.inst.cfg
index 91485b44c7..16fba2b1b1 100644
--- a/resources/quality/rigid3d_base/abs/rigid3d_base_abs_adaptive.inst.cfg
+++ b/resources/quality/rigid3d_base/abs/rigid3d_base_abs_adaptive.inst.cfg
@@ -11,5 +11,5 @@ material = generic_abs
 
 [values]
 cool_fan_enabled = False
-default_material_print_temperature = 240
-default_material_bed_temperature = 100
+material_print_temperature = =default_material_print_temperature + 5
+material_bed_temperature = =default_material_bed_temperature + 20
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/abs/rigid3d_base_abs_good.inst.cfg b/resources/quality/rigid3d_base/abs/rigid3d_base_abs_good.inst.cfg
index 223f2866f9..df4a0d78df 100644
--- a/resources/quality/rigid3d_base/abs/rigid3d_base_abs_good.inst.cfg
+++ b/resources/quality/rigid3d_base/abs/rigid3d_base_abs_good.inst.cfg
@@ -12,5 +12,4 @@ variant = 0.4mm Nozzle
 
 [values]
 cool_fan_enabled = False
-default_material_print_temperature = 235
-default_material_bed_temperature = 100
\ No newline at end of file
+material_bed_temperature = =default_material_bed_temperature + 20
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/abs/rigid3d_base_abs_low.inst.cfg b/resources/quality/rigid3d_base/abs/rigid3d_base_abs_low.inst.cfg
index b194edea3a..a5017c8454 100644
--- a/resources/quality/rigid3d_base/abs/rigid3d_base_abs_low.inst.cfg
+++ b/resources/quality/rigid3d_base/abs/rigid3d_base_abs_low.inst.cfg
@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 cool_fan_enabled = False
-default_material_print_temperature = 240
-default_material_bed_temperature = 100
+material_print_temperature = =default_material_print_temperature + 5
+material_bed_temperature = =default_material_bed_temperature + 20
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/abs/rigid3d_base_abs_standard.inst.cfg b/resources/quality/rigid3d_base/abs/rigid3d_base_abs_standard.inst.cfg
index 22ac39071c..b3feab4ba3 100644
--- a/resources/quality/rigid3d_base/abs/rigid3d_base_abs_standard.inst.cfg
+++ b/resources/quality/rigid3d_base/abs/rigid3d_base_abs_standard.inst.cfg
@@ -11,5 +11,4 @@ material = generic_abs
 
 [values]
 cool_fan_enabled = False
-default_material_print_temperature = 235
-default_material_bed_temperature = 100
+material_bed_temperature = =default_material_bed_temperature + 20
diff --git a/resources/quality/rigid3d_base/abs/rigid3d_base_abs_super.inst.cfg b/resources/quality/rigid3d_base/abs/rigid3d_base_abs_super.inst.cfg
index feff17d39a..67ce7ac3da 100644
--- a/resources/quality/rigid3d_base/abs/rigid3d_base_abs_super.inst.cfg
+++ b/resources/quality/rigid3d_base/abs/rigid3d_base_abs_super.inst.cfg
@@ -11,5 +11,4 @@ material = generic_abs
 
 [values]
 cool_fan_enabled = False
-default_material_print_temperature = 235
-default_material_bed_temperature = 100
+material_bed_temperature = =default_material_bed_temperature + 20
diff --git a/resources/quality/rigid3d_base/abs/rigid3d_base_abs_ultra.inst.cfg b/resources/quality/rigid3d_base/abs/rigid3d_base_abs_ultra.inst.cfg
index 929a9fd2e3..6c88825ca5 100644
--- a/resources/quality/rigid3d_base/abs/rigid3d_base_abs_ultra.inst.cfg
+++ b/resources/quality/rigid3d_base/abs/rigid3d_base_abs_ultra.inst.cfg
@@ -11,5 +11,4 @@ material = generic_abs
 
 [values]
 cool_fan_enabled = False
-default_material_print_temperature = 235
-default_material_bed_temperature = 100
+material_bed_temperature = =default_material_bed_temperature + 20
diff --git a/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_adaptive.inst.cfg b/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_adaptive.inst.cfg
index 6d41498e30..b2c82a46ef 100644
--- a/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_adaptive.inst.cfg
+++ b/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_adaptive.inst.cfg
@@ -10,8 +10,6 @@ quality_type = adaptive
 material = generic_nylon
 
 [values]
-default_material_print_temperature = 250
-default_material_bed_temperature = 100
-retraction_amount = 3
+material_print_temperature = =default_material_print_temperature + 5
 cool_fan_enabled = False
-retraction_speed = 40
\ No newline at end of file
+material_bed_temperature = =default_material_bed_temperature + 40
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_good.inst.cfg b/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_good.inst.cfg
index b3558c29d3..fdf434297d 100644
--- a/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_good.inst.cfg
+++ b/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_good.inst.cfg
@@ -10,8 +10,5 @@ quality_type = good
 material = generic_nylon
 
 [values]
-default_material_print_temperature = 250
-default_material_bed_temperature = 100
-retraction_amount = 3
 cool_fan_enabled = False
-retraction_speed = 40
\ No newline at end of file
+material_bed_temperature = =default_material_bed_temperature + 40
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_low.inst.cfg b/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_low.inst.cfg
index 0f412d463f..749c862a84 100644
--- a/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_low.inst.cfg
+++ b/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_low.inst.cfg
@@ -10,8 +10,6 @@ quality_type = low
 material = generic_nylon
 
 [values]
-default_material_print_temperature = 250
-default_material_bed_temperature = 100
-retraction_amount = 3
+material_print_temperature = =default_material_print_temperature + 5
 cool_fan_enabled = False
-retraction_speed = 40
\ No newline at end of file
+material_bed_temperature = =default_material_bed_temperature + 40
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_standard.inst.cfg b/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_standard.inst.cfg
index 34f3780442..bd437965d3 100644
--- a/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_standard.inst.cfg
+++ b/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_standard.inst.cfg
@@ -10,8 +10,5 @@ quality_type = standard
 material = generic_nylon
 
 [values]
-default_material_print_temperature = 250
-default_material_bed_temperature = 100
-retraction_amount = 3
 cool_fan_enabled = False
-retraction_speed = 40
\ No newline at end of file
+material_bed_temperature = =default_material_bed_temperature + 40
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_super.inst.cfg b/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_super.inst.cfg
index f18f752a13..6df1bb3705 100644
--- a/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_super.inst.cfg
+++ b/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_super.inst.cfg
@@ -10,8 +10,5 @@ quality_type = super
 material = generic_nylon
 
 [values]
-default_material_print_temperature = 250
-default_material_bed_temperature = 100
-retraction_amount = 3
 cool_fan_enabled = False
-retraction_speed = 40
\ No newline at end of file
+material_bed_temperature = =default_material_bed_temperature + 40
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_ultra.inst.cfg b/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_ultra.inst.cfg
index 381eb74bf6..3f181ff838 100644
--- a/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_ultra.inst.cfg
+++ b/resources/quality/rigid3d_base/nylon/rigid3d_base_nylon_ultra.inst.cfg
@@ -10,8 +10,5 @@ quality_type = ultra
 material = generic_nylon
 
 [values]
-default_material_print_temperature = 250
-default_material_bed_temperature = 100
-retraction_amount = 3
 cool_fan_enabled = False
-retraction_speed = 40
+material_bed_temperature = =default_material_bed_temperature + 40
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/petg/rigid3d_base_petg_adaptive.inst.cfg b/resources/quality/rigid3d_base/petg/rigid3d_base_petg_adaptive.inst.cfg
index e45d965bbc..29f7acefb1 100644
--- a/resources/quality/rigid3d_base/petg/rigid3d_base_petg_adaptive.inst.cfg
+++ b/resources/quality/rigid3d_base/petg/rigid3d_base_petg_adaptive.inst.cfg
@@ -10,6 +10,4 @@ quality_type = adaptive
 material = generic_petg
 
 [values]
-retraction_amount = 2
-default_material_print_temperature = 250
-default_material_bed_temperature = 85
+material_print_temperature = =default_material_print_temperature + 30
diff --git a/resources/quality/rigid3d_base/petg/rigid3d_base_petg_good.inst.cfg b/resources/quality/rigid3d_base/petg/rigid3d_base_petg_good.inst.cfg
index 1cb3ddd594..308a6d67ad 100644
--- a/resources/quality/rigid3d_base/petg/rigid3d_base_petg_good.inst.cfg
+++ b/resources/quality/rigid3d_base/petg/rigid3d_base_petg_good.inst.cfg
@@ -10,6 +10,4 @@ quality_type = good
 material = generic_petg
 
 [values]
-retraction_amount = 2
-default_material_print_temperature = 245
-default_material_bed_temperature = 85
+material_print_temperature = =default_material_print_temperature + 25
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/petg/rigid3d_base_petg_low.inst.cfg b/resources/quality/rigid3d_base/petg/rigid3d_base_petg_low.inst.cfg
index 142dab0fa5..ca40b19df9 100644
--- a/resources/quality/rigid3d_base/petg/rigid3d_base_petg_low.inst.cfg
+++ b/resources/quality/rigid3d_base/petg/rigid3d_base_petg_low.inst.cfg
@@ -10,6 +10,4 @@ quality_type = low
 material = generic_petg
 
 [values]
-retraction_amount = 2
-default_material_print_temperature = 250
-default_material_bed_temperature = 85
+material_print_temperature = =default_material_print_temperature + 30
diff --git a/resources/quality/rigid3d_base/petg/rigid3d_base_petg_standard.inst.cfg b/resources/quality/rigid3d_base/petg/rigid3d_base_petg_standard.inst.cfg
index 9970ea80d5..d81a2fad09 100644
--- a/resources/quality/rigid3d_base/petg/rigid3d_base_petg_standard.inst.cfg
+++ b/resources/quality/rigid3d_base/petg/rigid3d_base_petg_standard.inst.cfg
@@ -10,6 +10,4 @@ quality_type = standard
 material = generic_petg
 
 [values]
-retraction_amount = 2
-default_material_print_temperature = 245
-default_material_bed_temperature = 85
+material_print_temperature = =default_material_print_temperature + 25
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/petg/rigid3d_base_petg_super.inst.cfg b/resources/quality/rigid3d_base/petg/rigid3d_base_petg_super.inst.cfg
index d9b88d6f06..4ca03db230 100644
--- a/resources/quality/rigid3d_base/petg/rigid3d_base_petg_super.inst.cfg
+++ b/resources/quality/rigid3d_base/petg/rigid3d_base_petg_super.inst.cfg
@@ -10,6 +10,4 @@ quality_type = super
 material = generic_petg
 
 [values]
-retraction_amount = 2
-default_material_print_temperature = 245
-default_material_bed_temperature = 85
+material_print_temperature = =default_material_print_temperature + 25
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/petg/rigid3d_base_petg_ultra.inst.cfg b/resources/quality/rigid3d_base/petg/rigid3d_base_petg_ultra.inst.cfg
index a2cd29e814..98cb37974a 100644
--- a/resources/quality/rigid3d_base/petg/rigid3d_base_petg_ultra.inst.cfg
+++ b/resources/quality/rigid3d_base/petg/rigid3d_base_petg_ultra.inst.cfg
@@ -10,6 +10,4 @@ quality_type = ultra
 material = generic_petg
 
 [values]
-retraction_amount = 2
-default_material_print_temperature = 245
-default_material_bed_temperature = 85
+material_print_temperature = =default_material_print_temperature + 25
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/pla/rigid3d_base_pla_adaptive.inst.cfg b/resources/quality/rigid3d_base/pla/rigid3d_base_pla_adaptive.inst.cfg
index b5717639ec..a53fda819f 100644
--- a/resources/quality/rigid3d_base/pla/rigid3d_base_pla_adaptive.inst.cfg
+++ b/resources/quality/rigid3d_base/pla/rigid3d_base_pla_adaptive.inst.cfg
@@ -10,5 +10,4 @@ quality_type = adaptive
 material = generic_pla
 
 [values]
-default_material_print_temperature = 210
-default_material_bed_temperature = 55
+material_print_temperature = =default_material_print_temperature + 5
diff --git a/resources/quality/rigid3d_base/pla/rigid3d_base_pla_good.inst.cfg b/resources/quality/rigid3d_base/pla/rigid3d_base_pla_good.inst.cfg
index af26bebec3..2aab7a0a12 100644
--- a/resources/quality/rigid3d_base/pla/rigid3d_base_pla_good.inst.cfg
+++ b/resources/quality/rigid3d_base/pla/rigid3d_base_pla_good.inst.cfg
@@ -10,5 +10,4 @@ quality_type = good
 material = generic_pla
 
 [values]
-default_material_print_temperature = 205
-default_material_bed_temperature = 55
+material_print_temperature = =default_material_print_temperature + 5
diff --git a/resources/quality/rigid3d_base/pla/rigid3d_base_pla_low.inst.cfg b/resources/quality/rigid3d_base/pla/rigid3d_base_pla_low.inst.cfg
index 39902dcd0d..14ae5390b3 100644
--- a/resources/quality/rigid3d_base/pla/rigid3d_base_pla_low.inst.cfg
+++ b/resources/quality/rigid3d_base/pla/rigid3d_base_pla_low.inst.cfg
@@ -10,5 +10,4 @@ quality_type = low
 material = generic_pla
 
 [values]
-default_material_print_temperature = 210
-default_material_bed_temperature = 55
+material_print_temperature = =default_material_print_temperature + 10
diff --git a/resources/quality/rigid3d_base/pla/rigid3d_base_pla_standard.inst.cfg b/resources/quality/rigid3d_base/pla/rigid3d_base_pla_standard.inst.cfg
index f4d2a94bb7..191ac4dff2 100644
--- a/resources/quality/rigid3d_base/pla/rigid3d_base_pla_standard.inst.cfg
+++ b/resources/quality/rigid3d_base/pla/rigid3d_base_pla_standard.inst.cfg
@@ -10,5 +10,4 @@ quality_type = standard
 material = generic_pla
 
 [values]
-default_material_print_temperature = 205
-default_material_bed_temperature = 55
+material_print_temperature = =default_material_print_temperature + 5
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/pla/rigid3d_base_pla_super.inst.cfg b/resources/quality/rigid3d_base/pla/rigid3d_base_pla_super.inst.cfg
index 2c99771ee3..9fd11647bc 100644
--- a/resources/quality/rigid3d_base/pla/rigid3d_base_pla_super.inst.cfg
+++ b/resources/quality/rigid3d_base/pla/rigid3d_base_pla_super.inst.cfg
@@ -10,5 +10,4 @@ quality_type = super
 material = generic_pla
 
 [values]
-default_material_print_temperature = 205
-default_material_bed_temperature = 55
+material_print_temperature = =default_material_print_temperature + 5
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/pla/rigid3d_base_pla_ultra.inst.cfg b/resources/quality/rigid3d_base/pla/rigid3d_base_pla_ultra.inst.cfg
index 55c658b6f7..a2d0414e5e 100644
--- a/resources/quality/rigid3d_base/pla/rigid3d_base_pla_ultra.inst.cfg
+++ b/resources/quality/rigid3d_base/pla/rigid3d_base_pla_ultra.inst.cfg
@@ -10,5 +10,4 @@ quality_type = ultra
 material = generic_pla
 
 [values]
-default_material_print_temperature = 205
-default_material_bed_temperature = 55
+material_print_temperature = =default_material_print_temperature + 5
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_adaptive.inst.cfg b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_adaptive.inst.cfg
index 47bd8709ce..fe7d8a342d 100644
--- a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_adaptive.inst.cfg
+++ b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_adaptive.inst.cfg
@@ -10,8 +10,6 @@ quality_type = adaptive
 material = generic_tpu
 
 [values]
-default_material_print_temperature = 230
-default_material_bed_temperature = 60
+material_bed_temperature = =default_material_bed_temperature + 60
 speed_print = 20
 retraction_speed = 20
-retraction_amount = 3
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_good.inst.cfg b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_good.inst.cfg
index 5ae336a85b..cf30f739a4 100644
--- a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_good.inst.cfg
+++ b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_good.inst.cfg
@@ -10,8 +10,6 @@ quality_type = good
 material = generic_tpu
 
 [values]
-default_material_print_temperature = 230
-default_material_bed_temperature = 60
 speed_print = 20
 retraction_speed = 20
-retraction_amount = 3
\ No newline at end of file
+material_bed_temperature = =default_material_bed_temperature + 60
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_low.inst.cfg b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_low.inst.cfg
index c9a9eb986e..8d6bab2cc5 100644
--- a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_low.inst.cfg
+++ b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_low.inst.cfg
@@ -10,8 +10,6 @@ quality_type = low
 material = generic_tpu
 
 [values]
-default_material_print_temperature = 230
-default_material_bed_temperature = 60
 speed_print = 20
 retraction_speed = 20
-retraction_amount = 3
\ No newline at end of file
+material_bed_temperature = =default_material_bed_temperature + 60
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_standard.inst.cfg b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_standard.inst.cfg
index 8f28f74899..554d451b1f 100644
--- a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_standard.inst.cfg
+++ b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_standard.inst.cfg
@@ -10,8 +10,6 @@ quality_type = standard
 material = generic_tpu
 
 [values]
-default_material_print_temperature = 230
-default_material_bed_temperature = 60
 speed_print = 20
 retraction_speed = 20
-retraction_amount = 3
\ No newline at end of file
+material_bed_temperature = =default_material_bed_temperature + 60
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_super.inst.cfg b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_super.inst.cfg
index 32e1c81f6d..32096a6c4b 100644
--- a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_super.inst.cfg
+++ b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_super.inst.cfg
@@ -10,8 +10,6 @@ quality_type = super
 material = generic_tpu
 
 [values]
-default_material_print_temperature = 230
-default_material_bed_temperature = 60
 speed_print = 20
 retraction_speed = 20
-retraction_amount = 3
\ No newline at end of file
+material_bed_temperature = =default_material_bed_temperature + 60
\ No newline at end of file
diff --git a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_ultra.inst.cfg b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_ultra.inst.cfg
index ce840ccbe2..ae68bfbe77 100644
--- a/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_ultra.inst.cfg
+++ b/resources/quality/rigid3d_base/tpu/rigid3d_base_tpu_ultra.inst.cfg
@@ -10,8 +10,6 @@ quality_type = ultra
 material = generic_tpu
 
 [values]
-default_material_print_temperature = 230
-default_material_bed_temperature = 60
 speed_print = 20
 retraction_speed = 20
-retraction_amount = 3
\ No newline at end of file
+material_bed_temperature = =default_material_bed_temperature + 60
\ No newline at end of file