Merge branch '2.3' of github.com:Ultimaker/Cura into 2.3

cura/CuraApplication.py

@@ -322,6 +322,7 @@ class CuraApplication(QtApplication):
                 path = Resources.getStoragePath(self.ResourceTypes.VariantInstanceContainer, file_name)
 
             if path:
+                instance.setPath(path)
                 with SaveFile(path, "wt", -1, "utf-8") as f:
                     f.write(data)
 
@@ -346,6 +347,7 @@ class CuraApplication(QtApplication):
             elif stack_type == "extruder_train":
                 path = Resources.getStoragePath(self.ResourceTypes.ExtruderStack, file_name)
             if path:
+                stack.setPath(path)
                 with SaveFile(path, "wt", -1, "utf-8") as f:
                     f.write(data)
 

cura/PrinterOutputDevice.py

@@ -150,8 +150,9 @@ class PrinterOutputDevice(QObject, OutputDevice):
     @pyqtSlot(int)
     def setTargetBedTemperature(self, temperature):
         self._setTargetBedTemperature(temperature)
-        self._target_bed_temperature = temperature
-        self.targetBedTemperatureChanged.emit()
+        if self._target_bed_temperature != temperature:
+            self._target_bed_temperature = temperature
+            self.targetBedTemperatureChanged.emit()
 
     ## Time the print has been printing.
     #  Note that timeTotal - timeElapsed should give time remaining.
@@ -212,8 +213,9 @@ class PrinterOutputDevice(QObject, OutputDevice):
     #   This simply sets the bed temperature, but ensures that a signal is emitted.
     #   /param temperature temperature of the bed.
     def _setBedTemperature(self, temperature):
-        self._bed_temperature = temperature
-        self.bedTemperatureChanged.emit()
+        if self._bed_temperature != temperature:
+            self._bed_temperature = temperature
+            self.bedTemperatureChanged.emit()
 
     ##  Get the target bed temperature if connected printer (if any)
     @pyqtProperty(int, notify = targetBedTemperatureChanged)
@@ -228,8 +230,10 @@ class PrinterOutputDevice(QObject, OutputDevice):
     @pyqtSlot(int, int)
     def setTargetHotendTemperature(self, index, temperature):
         self._setTargetHotendTemperature(index, temperature)
-        self._target_hotend_temperatures[index] = temperature
-        self.targetHotendTemperaturesChanged.emit()
+
+        if self._target_hotend_temperatures[index] != temperature:
+            self._target_hotend_temperatures[index] = temperature
+            self.targetHotendTemperaturesChanged.emit()
 
     ##  Implementation function of setTargetHotendTemperature.
     #   /param index Index of the hotend to set the temperature of
@@ -251,8 +255,9 @@ class PrinterOutputDevice(QObject, OutputDevice):
     #   /param index Index of the hotend
     #   /param temperature temperature of the hotend (in deg C)
     def _setHotendTemperature(self, index, temperature):
-        self._hotend_temperatures[index] = temperature
-        self.hotendTemperaturesChanged.emit()
+        if self._hotend_temperatures[index] != temperature:
+            self._hotend_temperatures[index] = temperature
+            self.hotendTemperaturesChanged.emit()
 
     @pyqtProperty("QVariantList", notify = materialIdChanged)
     def materialIds(self):
@@ -267,7 +272,6 @@ class PrinterOutputDevice(QObject, OutputDevice):
             self._material_ids[index] = material_id
             self.materialIdChanged.emit(index, material_id)
 
-
     @pyqtProperty("QVariantList", notify = hotendIdChanged)
     def hotendIds(self):
         return self._hotend_ids
@@ -302,8 +306,9 @@ class PrinterOutputDevice(QObject, OutputDevice):
     ##  Set the connection state of this output device.
     #   /param connection_state ConnectionState enum.
     def setConnectionState(self, connection_state):
-        self._connection_state = connection_state
-        self.connectionStateChanged.emit(self._id)
+        if self._connection_state != connection_state:
+            self._connection_state = connection_state
+            self.connectionStateChanged.emit(self._id)
 
     @pyqtProperty(str, notify = connectionTextChanged)
     def connectionText(self):
@@ -351,6 +356,7 @@ class PrinterOutputDevice(QObject, OutputDevice):
         if self._head_z != z:
             self._head_z = z
             position_changed = True
+
         if position_changed:
             self.headPositionChanged.emit()
 

cura/Settings/ContainerManager.py

@@ -167,6 +167,19 @@ class ContainerManager(QObject):
 
         return True
 
+    @pyqtSlot(str, str, result=str)
+    def getContainerMetaDataEntry(self, container_id, entry_name):
+        containers = self._container_registry.findContainers(None, id=container_id)
+        if not containers:
+            UM.Logger.log("w", "Could not get metadata of container %s because it was not found.", container_id)
+            return ""
+
+        result = containers[0].getMetaDataEntry(entry_name)
+        if result:
+            return result
+        else:
+            return ""
+
     ##  Set a metadata entry of the specified container.
     #
     #   This will set the specified entry of the container's metadata to the specified
@@ -577,6 +590,29 @@ class ContainerManager(QObject):
 
         return new_name
 
+    @pyqtSlot(str, result = str)
+    def duplicateMaterial(self, material_id):
+        containers = self._container_registry.findInstanceContainers(id=material_id)
+        if not containers:
+            UM.Logger.log("d", "Unable to duplicate the material with id %s, because it doesn't exist.", material_id)
+            return ""
+
+        # Ensure all settings are saved.
+        UM.Application.getInstance().saveSettings()
+
+        # Create a new ID & container to hold the data.
+        new_id = self._container_registry.uniqueName(material_id)
+        container_type = type(containers[0])  # Could be either a XMLMaterialProfile or a InstanceContainer
+        duplicated_container = container_type(new_id)
+
+        # Instead of duplicating we load the data from the basefile again.
+        # This ensures that the inheritance goes well and all "cut up" subclasses of the xmlMaterial profile
+        # are also correctly created.
+        with open(containers[0].getPath(), encoding="utf-8") as f:
+            duplicated_container.deserialize(f.read())
+        duplicated_container.setDirty(True)
+        self._container_registry.addContainer(duplicated_container)
+
     # Factory function, used by QML
     @staticmethod
     def createContainerManager(engine, js_engine):

cura/Settings/ExtruderManager.py

@@ -160,7 +160,7 @@ class ExtruderManager(QObject):
     def createExtruderTrain(self, extruder_definition, machine_definition, position, machine_id):
         # Cache some things.
         container_registry = UM.Settings.ContainerRegistry.getInstance()
-        machine_definition_id = machine_definition.getId()
+        machine_definition_id = UM.Application.getInstance().getMachineManager().getQualityDefinitionId(machine_definition)
 
         # Create a container stack for this extruder.
         extruder_stack_id = container_registry.uniqueName(extruder_definition.getId())
@@ -222,7 +222,7 @@ class ExtruderManager(QObject):
 
         search_criteria = { "type": "quality" }
         if machine_definition.getMetaDataEntry("has_machine_quality"):
-            search_criteria["definition"] = machine_definition.id
+            search_criteria["definition"] = machine_definition_id
             if machine_definition.getMetaDataEntry("has_materials") and material:
                 search_criteria["material"] = material.id
         else:

cura/Settings/MachineManager.py

@@ -430,13 +430,23 @@ class MachineManager(QObject):
 
         return result
 
+    ##  Get the Material ID associated with the currently active material
+    #   \returns MaterialID (string) if found, empty string otherwise
     @pyqtProperty(str, notify=activeQualityChanged)
     def activeQualityMaterialId(self):
         if self._active_container_stack:
             quality = self._active_container_stack.findContainer({"type": "quality"})
             if quality:
-                return quality.getMetaDataEntry("material")
+                material_id = quality.getMetaDataEntry("material")
+                if material_id:
+                    # if the currently active machine inherits its qualities from a different machine
+                    # definition, make sure to return a material that is relevant to that machine definition
+                    definition_id = self.activeDefinitionId
+                    quality_definition_id = self.activeQualityDefinitionId
+                    if definition_id != quality_definition_id:
+                        material_id = material_id.replace(definition_id, quality_definition_id, 1)
 
+                    return material_id
         return ""
 
     @pyqtProperty(str, notify=activeQualityChanged)
@@ -594,7 +604,7 @@ class MachineManager(QObject):
                 criteria["material"] = material.getId()
 
             if self._global_container_stack.getMetaDataEntry("has_machine_quality"):
-                criteria["definition"] = self._global_container_stack.getBottom().getId()
+                criteria["definition"] = self.activeQualityDefinitionId
             else:
                 criteria["definition"] = "fdmprinter"
 
@@ -685,6 +695,51 @@ class MachineManager(QObject):
 
         return ""
 
+    ##  Get the Definition ID to use to select quality profiles for the currently active machine
+    #   \returns DefinitionID (string) if found, empty string otherwise
+    #   \sa getQualityDefinitionId
+    @pyqtProperty(str, notify = globalContainerChanged)
+    def activeQualityDefinitionId(self):
+        if self._global_container_stack:
+            return self.getQualityDefinitionId(self._global_container_stack.getBottom())
+        return ""
+
+    ##  Get the Definition ID to use to select quality profiles for machines of the specified definition
+    #   This is normally the id of the definition itself, but machines can specify a different definition to inherit qualities from
+    #   \param definition (DefinitionContainer) machine definition
+    #   \returns DefinitionID (string) if found, empty string otherwise
+    def getQualityDefinitionId(self, definition):
+        definition_id = definition.getMetaDataEntry("quality_definition")
+        if not definition_id:
+            definition_id = definition.getId()
+        return definition_id
+
+    ##  Get the Variant ID to use to select quality profiles for the currently active variant
+    #   \returns VariantID (string) if found, empty string otherwise
+    #   \sa getQualityVariantId
+    @pyqtProperty(str, notify = activeVariantChanged)
+    def activeQualityVariantId(self):
+        if self._global_container_stack:
+            variant = self._global_container_stack.findContainer({"type": "variant"})
+            if variant:
+                return self.getQualityVariantId(self._global_container_stack.getBottom(), variant)
+        return ""
+
+    ##  Get the Variant ID to use to select quality profiles for variants of the specified definitions
+    #   This is normally the id of the variant itself, but machines can specify a different definition
+    #   to inherit qualities from, which has consequences for the variant to use as well
+    #   \param definition (DefinitionContainer) machine definition
+    #   \param variant (DefinitionContainer) variant definition
+    #   \returns VariantID (string) if found, empty string otherwise
+    def getQualityVariantId(self, definition, variant):
+        variant_id = variant.getId()
+        definition_id = definition.getId()
+        quality_definition_id = self.getQualityDefinitionId(definition)
+
+        if definition_id != quality_definition_id:
+            variant_id = variant_id.replace(definition_id, quality_definition_id, 1)
+        return variant_id
+
     ##  Gets how the active definition calls variants
     #   Caveat: per-definition-variant-title is currently not translated (though the fallback is)
     @pyqtProperty(str, notify = globalContainerChanged)
@@ -789,10 +844,10 @@ class MachineManager(QObject):
         search_criteria = { "type": "material" }
 
         if definition.getMetaDataEntry("has_machine_materials"):
-            search_criteria["definition"] = definition.id
+            search_criteria["definition"] = self.getQualityDefinitionId(definition)
 
             if definition.getMetaDataEntry("has_variants") and variant_container:
-                search_criteria["variant"] = variant_container.id
+                search_criteria["variant"] = self.getQualityVariantId(definition, variant_container)
         else:
             search_criteria["definition"] = "fdmprinter"
 
@@ -823,7 +878,7 @@ class MachineManager(QObject):
         search_criteria = { "type": "quality" }
 
         if definition.getMetaDataEntry("has_machine_quality"):
-            search_criteria["definition"] = definition.id
+            search_criteria["definition"] = self.getQualityDefinitionId(definition)
 
             if definition.getMetaDataEntry("has_materials") and material_container:
                 search_criteria["material"] = material_container.id
@@ -866,10 +921,10 @@ class MachineManager(QObject):
                     if definition.getMetaDataEntry("has_variants"):
                         material_search_criteria["variant"] = material_container.getMetaDataEntry("variant")
                 else:
-                    material_search_criteria["definition"] = definition.id
+                    material_search_criteria["definition"] = self.getQualityDefinitionId(definition)
 
                     if definition.getMetaDataEntry("has_variants") and variant_container:
-                        material_search_criteria["variant"] = variant_container.id
+                        material_search_criteria["variant"] = self.getQualityVariantId(definition, variant_container)
             else:
                 material_search_criteria["definition"] = "fdmprinter"
             material_containers = container_registry.findInstanceContainers(**material_search_criteria)

plugins/3MFReader/ThreeMFReader.py

@@ -71,7 +71,7 @@ class ThreeMFReader(MeshReader):
                 rotation.setByRotationAxis(-0.5 * math.pi, Vector(1, 0, 0))
 
                 # TODO: We currently do not check for normals and simply recalculate them.
-                mesh_builder.calculateNormals()
+                mesh_builder.calculateNormals(flip = True)
                 mesh_builder.setFileName(file_name)
                 node.setMeshData(mesh_builder.build().getTransformed(rotation))
                 node.setSelectable(True)

plugins/CuraProfileReader/CuraProfileReader.py

@@ -27,15 +27,15 @@ class CuraProfileReader(ProfileReader):
     #   returned.
     def read(self, file_name):
         try:
-            archive = zipfile.ZipFile(file_name, "r")
-            results = []
-            for profile_id in archive.namelist():
-                with archive.open(profile_id) as f:
-                    serialized = f.read()
-                profile = self._loadProfile(serialized.decode("utf-8"), profile_id)
-                if profile is not None:
-                    results.append(profile)
-            return results
+            with zipfile.ZipFile(file_name, "r") as archive:
+                results = []
+                for profile_id in archive.namelist():
+                    with archive.open(profile_id) as f:
+                        serialized = f.read()
+                    profile = self._loadProfile(serialized.decode("utf-8"), profile_id)
+                    if profile is not None:
+                        results.append(profile)
+                return results
 
         except zipfile.BadZipFile:
             # It must be an older profile from Cura 2.1.

plugins/PerObjectSettingsTool/PerObjectSettingsTool.py

@@ -77,7 +77,10 @@ class PerObjectSettingsTool(Tool):
             if not self._multi_extrusion:
                 default_stack_id = global_container_stack.getId()
             else:
-                default_stack_id = ExtruderManager.getInstance().getExtruderStack(0).getId()
+                default_stack = ExtruderManager.getInstance().getExtruderStack(0)
+                if default_stack:
+                    default_stack_id = default_stack.getId()
+                else: default_stack_id = global_container_stack.getId()
 
             root_node = Application.getInstance().getController().getScene().getRoot()
             for node in DepthFirstIterator(root_node):

plugins/SolidView/SolidView.py

@@ -51,6 +51,8 @@ class SolidView(View):
             if multi_extrusion:
                 support_extruder_nr = global_container_stack.getProperty("support_extruder_nr", "value")
                 support_angle_stack = ExtruderManager.getInstance().getExtruderStack(support_extruder_nr)
+                if not support_angle_stack:
+                    support_angle_stack = global_container_stack
             else:
                 support_angle_stack = global_container_stack
 

plugins/XmlMaterialProfile/XmlMaterialProfile.py

@@ -22,35 +22,6 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
         super().__init__(container_id, *args, **kwargs)
         self._inherited_files = []
 
-    ##  Overridden from InstanceContainer
-    def duplicate(self, new_id, new_name = None):
-        base_file = self.getMetaDataEntry("base_file", None)
-
-        if base_file != self.id:
-            containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(id = base_file)
-            if containers:
-                new_basefile = containers[0].duplicate(self.getMetaDataEntry("brand") + "_" + new_id, new_name)
-                base_file = new_basefile.id
-                UM.Settings.ContainerRegistry.getInstance().addContainer(new_basefile)
-
-                new_id = self.getMetaDataEntry("brand") + "_" + new_id + "_" + self.getDefinition().getId()
-                variant = self.getMetaDataEntry("variant")
-                if variant:
-                    variant_containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(id = variant)
-                    if variant_containers:
-                        new_id += "_" + variant_containers[0].getName().replace(" ", "_")
-            has_base_file = True
-        else:
-            has_base_file = False
-
-        new_id = UM.Settings.ContainerRegistry.getInstance().createUniqueName("material", self._id, new_id, "")
-        result = super().duplicate(new_id, new_name)
-        if has_base_file:
-            result.setMetaDataEntry("base_file", base_file)
-        else:
-            result.setMetaDataEntry("base_file", result.id)
-        return result
-
     def getInheritedFiles(self):
         return self._inherited_files
 
@@ -63,6 +34,7 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
             container._read_only = read_only  # prevent loop instead of calling setReadOnly
 
     ##  Overridden from InstanceContainer
+    #   set the meta data for all machine / variant combinations
     def setMetaDataEntry(self, key, value):
         if self.isReadOnly():
             return
@@ -103,10 +75,17 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
     #
     #     basefile = self.getMetaDataEntry("base_file", self._id)  #if basefile is self.id, this is a basefile.
     #     for container in UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(base_file = basefile):
-    #         container._dirty = True
+    #         if not container.isReadOnly():
+    #             container.setDirty(True)
 
     ##  Overridden from InstanceContainer
+    # base file: global settings + supported machines
+    # machine / variant combination: only changes for itself.
     def serialize(self):
+        if self._read_only:
+            Logger.log("w", "Serializing read-only container [%s], probably a programming error." % self.id)
+            return
+
         registry = UM.Settings.ContainerRegistry.getInstance()
 
         base_file = self.getMetaDataEntry("base_file", "")
@@ -114,7 +93,7 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
             # Since we create an instance of XmlMaterialProfile for each machine and nozzle in the profile,
             # we should only serialize the "base" material definition, since that can then take care of
             # serializing the machine/nozzle specific profiles.
-            raise NotImplementedError("Cannot serialize non-root XML materials")
+            raise NotImplementedError("Ignoring serializing non-root XML materials, the data is contained in the base material")
 
         builder = ET.TreeBuilder()
 
@@ -528,7 +507,9 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
             # Change the type of this container so it is not shown as an option in menus.
             # This uses InstanceContainer.setMetaDataEntry because otherwise all containers that
             # share this basefile are also updated.
+            dirty = self.isDirty()
             super().setMetaDataEntry("type", "incompatible_material")
+            super().setDirty(dirty) # reset dirty flag after setMetaDataEntry
 
     def _addSettingElement(self, builder, instance):
         try:

resources/definitions/fdmprinter.def.json

@@ -2478,19 +2478,6 @@
                     "enabled": "support_enable",
                     "settable_per_mesh": true
                 },
-                "support_area_smoothing":
-                {
-                    "label": "Support Area Smoothing",
-                    "description": "Maximum distance in the X/Y directions of a line segment which is to be smoothed out. Ragged lines are introduced by the join distance and support bridge, which cause the machine to resonate. Smoothing the support areas won't cause them to break with the constraints, except it might change the overhang.",
-                    "unit": "mm",
-                    "type": "float",
-                    "default_value": 0.6,
-                    "global_inherits_stack": "support_extruder_nr",
-                    "minimum_value": "0",
-                    "maximum_value_warning": "1.0",
-                    "enabled": "support_enable",
-                    "settable_per_mesh": true
-                },
                 "support_interface_enable":
                 {
                     "label": "Enable Support Interface",
@@ -2546,6 +2533,19 @@
                         }
                     }
                 },
+                "support_interface_skip_height":
+                {
+                    "label": "Support Interface Resolution",
+                    "description": "When checking where there's model above the support, take steps of the given height. Lower values will slice slower, while higher values may cause normal support to be printed in some places where there should have been support interface.",
+                    "unit": "mm",
+                    "type": "float",
+                    "default_value": 0.3,
+                    "minimum_value": "0",
+                    "global_inherits_stack": "support_extruder_nr",
+                    "maximum_value_warning": "support_interface_height",
+                    "enabled": "extruderValue(support_extruder_nr, 'support_interface_enable') and support_enable",
+                    "settable_per_mesh": true
+                },
                 "support_interface_density":
                 {
                     "label": "Support Interface Density",

resources/definitions/ultimaker2_extended_plus.def.json

@@ -7,6 +7,7 @@
         "author": "Ultimaker",
         "manufacturer": "Ultimaker",
         "category": "Ultimaker",
+        "quality_definition": "ultimaker2_plus",
         "weight": 2,
         "file_formats": "text/x-gcode",
         "platform": "ultimaker2_platform.obj",
@@ -17,15 +18,6 @@
     "overrides": {
         "machine_height": {
             "default_value": 305
-        },
-        "machine_show_variants": {
-            "default_value": true
-        },
-        "machine_nozzle_head_distance": {
-            "default_value": 5
-        },
-        "machine_nozzle_expansion_angle": {
-            "default_value": 45
         }
     }
 }

resources/qml/Menus/MaterialMenu.qml

@@ -106,10 +106,10 @@ Menu
         var result = { "type": "material" };
         if(Cura.MachineManager.filterMaterialsByMachine)
         {
-            result.definition = Cura.MachineManager.activeDefinitionId;
+            result.definition = Cura.MachineManager.activeQualityDefinitionId;
             if(Cura.MachineManager.hasVariants)
             {
-                result.variant = Cura.MachineManager.activeVariantId;
+                result.variant = Cura.MachineManager.activeQualityVariantId;
             }
         }
         else

resources/qml/Menus/ProfileMenu.qml

@@ -38,7 +38,7 @@ Menu
         id: customProfileInstantiator
         model: UM.InstanceContainersModel
         {
-            filter: { "type": "quality_changes", "extruder": null, "definition": Cura.MachineManager.filterQualityByMachine ? Cura.MachineManager.activeDefinitionId : "fdmprinter" };
+            filter: { "type": "quality_changes", "extruder": null, "definition": Cura.MachineManager.filterQualityByMachine ? Cura.MachineManager.activeQualityDefinitionId : "fdmprinter" };
             onModelReset: customSeparator.visible = rowCount() > 0
         }
 
@@ -79,7 +79,7 @@ Menu
 
         if(Cura.MachineManager.filterQualityByMachine)
         {
-            result.definition = Cura.MachineManager.activeDefinitionId;
+            result.definition = Cura.MachineManager.activeQualityDefinitionId;
             if(Cura.MachineManager.hasMaterials)
             {
                 result.material = Cura.MachineManager.activeQualityMaterialId;

resources/qml/Preferences/MaterialsPage.qml

@@ -129,7 +129,6 @@ UM.ManagementPage
             enabled: base.currentItem != null && base.currentItem.id != Cura.MachineManager.activeMaterialId
             onClicked: Cura.MachineManager.setActiveMaterial(base.currentItem.id)
         },
-        /*  // apparently visible does not work on OS X
         Button
         {
             text: catalog.i18nc("@action:button", "Duplicate");
@@ -137,24 +136,17 @@ UM.ManagementPage
             enabled: base.currentItem != null
             onClicked:
             {
-                var material_id = Cura.ContainerManager.duplicateContainer(base.currentItem.id)
+                var base_file = Cura.ContainerManager.getContainerMetaDataEntry(base.currentItem.id, "base_file")
+                // We need to copy the base container instead of the specific variant.
+                var material_id = base_file == "" ? Cura.ContainerManager.duplicateMaterial(base.currentItem.id): Cura.ContainerManager.duplicateMaterial(base_file)
                 if(material_id == "")
                 {
                     return
                 }
 
-                if(Cura.MachineManager.filterQualityByMachine)
-                {
-                    var quality_id = Cura.ContainerManager.duplicateContainer(Cura.MachineManager.activeQualityId)
-                    Cura.ContainerManager.setContainerMetaDataEntry(quality_id, "material", material_id)
-                    Cura.MachineManager.setActiveQuality(quality_id)
-                }
-
                 Cura.MachineManager.setActiveMaterial(material_id)
             }
-            visible: false;
         },
-        */
         Button
         {
             text: catalog.i18nc("@action:button", "Remove");
@@ -162,15 +154,13 @@ UM.ManagementPage
             enabled: base.currentItem != null && !base.currentItem.readOnly && !Cura.ContainerManager.isContainerUsed(base.currentItem.id)
             onClicked: confirmDialog.open()
         },
-        /*  // apparently visible does not work on OS X
         Button
         {
             text: catalog.i18nc("@action:button", "Import");
             iconName: "document-import";
             onClicked: importDialog.open();
-            visible: false;
+            visible: true;
         },
-        */
         Button
         {
             text: catalog.i18nc("@action:button", "Export")

resources/qml/Preferences/ProfilesPage.qml

@@ -23,7 +23,7 @@ UM.ManagementPage
             var result = { "type": "quality*", "extruder": null };
             if(Cura.MachineManager.filterQualityByMachine)
             {
-                result.definition = Cura.MachineManager.activeDefinitionId;
+                result.definition = Cura.MachineManager.activeQualityDefinitionId;
                 if(Cura.MachineManager.hasMaterials)
                 {
                     result.material = Cura.MachineManager.allActiveMaterialIds[Cura.MachineManager.activeMachineId];

resources/qml/Settings/SettingItem.qml

@@ -138,7 +138,7 @@ Item {
             {
                 id: linkedSettingIcon;
 
-                visible: Cura.MachineManager.activeStackId != Cura.MachineManager.activeMachineId && !definition.settable_per_extruder && base.showLinkedSettingIcon
+                visible: Cura.MachineManager.activeStackId != Cura.MachineManager.activeMachineId && (!definition.settable_per_extruder || definition.global_inherits_stack != "-1") && base.showLinkedSettingIcon
 
                 height: parent.height;
                 width: height;

resources/quality/ultimaker2_extended_plus/um2ep_abs_0.25_normal.inst.cfg

@@ -1,23 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_abs_ultimaker2_extended_plus_0.25_mm
-weight = -2
-quality_type = high
-
-[values]
-layer_height = 0.06
-wall_thickness = 0.88
-top_bottom_thickness = 0.72
-infill_sparse_density = 22
-speed_print = 30
-cool_min_layer_time = 3
-cool_fan_speed_min = 20
-cool_min_speed = 10
-cool_min_layer_time_fan_speed_max = 15
-
-

resources/quality/ultimaker2_extended_plus/um2ep_abs_0.4_fast.inst.cfg

@@ -1,26 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_abs_ultimaker2_extended_plus_0.4_mm
-weight = -1
-quality_type = fast
-
-[values]
-layer_height = 0.15
-wall_thickness = 0.7
-top_bottom_thickness = 0.75
-infill_sparse_density = 18
-speed_print = 55
-speed_wall = 40
-speed_topbottom = 30
-speed_travel = 150
-speed_layer_0 = 30
-cool_min_layer_time = 3
-cool_fan_speed_min = 20
-cool_min_speed = 10
-cool_min_layer_time_fan_speed_max = 15
-

resources/quality/ultimaker2_extended_plus/um2ep_abs_0.4_high.inst.cfg

@@ -1,23 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_abs_ultimaker2_extended_plus_0.4_mm
-weight = -3
-quality_type = high
-
-[values]
-layer_height = 0.06
-wall_thickness = 1.05
-top_bottom_thickness = 0.72
-infill_sparse_density = 22
-speed_print = 45
-speed_wall = 30
-cool_min_layer_time = 3
-cool_fan_speed_min = 20
-cool_min_speed = 10
-cool_min_layer_time_fan_speed_max = 15
-

resources/quality/ultimaker2_extended_plus/um2ep_abs_0.4_normal.inst.cfg

@@ -1,22 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_abs_ultimaker2_extended_plus_0.4_mm
-weight = -2
-quality_type = normal
-
-[values]
-layer_height = 0.1
-wall_thickness = 1.05
-top_bottom_thickness = 0.8
-infill_sparse_density = 20
-speed_print = 45
-speed_wall = 30
-cool_min_layer_time = 3
-cool_fan_speed_min = 20
-cool_min_speed = 10
-cool_min_layer_time_fan_speed_max = 15

resources/quality/ultimaker2_extended_plus/um2ep_abs_0.6_normal.inst.cfg

@@ -1,24 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_abs_ultimaker2_extended_plus_0.6_mm
-weight = -2
-quality_type = normal
-
-[values]
-layer_height = 0.15
-wall_thickness = 1.59
-top_bottom_thickness = 1.2
-infill_sparse_density = 20
-speed_print = 40
-speed_infill = 55
-cool_min_layer_time = 3
-cool_fan_speed_min = 50
-cool_min_speed = 20
-cool_min_layer_time_fan_speed_max = 20
-
-

resources/quality/ultimaker2_extended_plus/um2ep_abs_0.8_normal.inst.cfg

@@ -1,22 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_abs_ultimaker2_extended_plus_0.8_mm
-weight = -2
-quality_type = fast
-
-[values]
-layer_height = 0.2
-wall_thickness = 2.1
-top_bottom_thickness = 1.2
-infill_sparse_density = 20
-speed_print = 40
-cool_min_layer_time = 3
-cool_fan_speed_min = 50
-cool_min_speed = 15
-cool_min_layer_time_fan_speed_max = 25
-

resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.25_normal.inst.cfg

@@ -1,22 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_ultimaker2_extended_plus_0.25_mm
-weight = -2
-quality_type = high
-
-[values]
-layer_height = 0.06
-wall_thickness = 0.88
-top_bottom_thickness = 0.72
-infill_sparse_density = 22
-speed_print = 30
-cool_min_layer_time = 2
-cool_fan_speed_min = 20
-cool_min_speed = 15
-cool_min_layer_time_fan_speed_max = 15
-

resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.4_fast.inst.cfg

@@ -1,26 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_ultimaker2_extended_plus_0.4_mm
-weight = -1
-quality_type = fast
-
-[values]
-layer_height = 0.15
-wall_thickness = 0.7
-top_bottom_thickness = 0.75
-infill_sparse_density = 18
-speed_print = 45
-speed_wall = 40
-speed_travel = 150
-speed_layer_0 = 30
-cool_min_layer_time = 3
-cool_fan_speed_min = 80
-cool_min_speed = 10
-cool_min_layer_time_fan_speed_max = 15
-
-

resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.4_high.inst.cfg

@@ -1,22 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_ultimaker2_extended_plus_0.4_mm
-weight = -3
-quality_type = high
-
-[values]
-layer_height = 0.06
-wall_thickness = 1.05
-top_bottom_thickness = 0.72
-infill_sparse_density = 22
-speed_print = 45
-speed_wall = 30
-cool_min_layer_time = 2
-cool_fan_speed_min = 80
-cool_min_speed = 15
-cool_min_layer_time_fan_speed_max = 15

resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.4_normal.inst.cfg

@@ -1,23 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_ultimaker2_extended_plus_0.4_mm
-weight = -2
-quality_type = normal
-
-[values]
-layer_height = 0.1
-wall_thickness = 1.05
-top_bottom_thickness = 0.8
-infill_sparse_density = 20
-speed_print = 45
-speed_wall = 30
-cool_min_layer_time = 3
-cool_fan_speed_min = 80
-cool_min_speed = 10
-cool_min_layer_time_fan_speed_max = 15
-

resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.6_normal.inst.cfg

@@ -1,21 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_ultimaker2_extended_plus_0.6_mm
-weight = -2
-quality_type = normal
-
-[values]
-layer_height = 0.15
-wall_thickness = 1.59
-top_bottom_thickness = 1.2
-infill_sparse_density = 20
-speed_print = 40
-cool_min_layer_time = 5
-cool_fan_speed_min = 80
-cool_min_speed = 8
-cool_min_layer_time_fan_speed_max = 20

resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.8_normal.inst.cfg

@@ -1,21 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_ultimaker2_extended_plus_0.8_mm
-weight = -2
-quality_type = fast
-
-[values]
-layer_height = 0.2
-wall_thickness = 2.1
-top_bottom_thickness = 1.2
-infill_sparse_density = 20
-speed_print = 40
-cool_min_layer_time = 3
-cool_fan_speed_min = 80
-cool_min_speed = 8
-cool_min_layer_time_fan_speed_max = 25

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.4_draft.inst.cfg

@@ -1,42 +0,0 @@
-[general]
-version = 2
-name = Draft Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_plus_ultimaker2_extended_plus_0.4_mm
-weight = 0
-quality_type = draft
-
-[values]
-speed_wall_x = 25
-support_z_distance = 0.26
-raft_interface_line_spacing = 1
-cool_min_speed = 8
-cool_fan_speed = 50
-wall_thickness = 1.14
-raft_margin = 15
-speed_layer_0 = 15
-raft_airgap = 0.37
-infill_overlap = 5
-layer_height = 0.2
-raft_interface_line_width = 0.8
-top_bottom_thickness = 1.5
-cool_fan_speed_min = 25
-raft_surface_line_width = 0.38
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 20
-support_enable = True
-speed_wall_0 = 20
-adhesion_type = raft
-infill_sparse_density = 30
-layer_0_z_overlap = 0.22
-cool_min_layer_time = 3
-speed_print = 25
-line_width = 0.38
-support_angle = 45
-raft_base_line_spacing = 1.6
-raft_base_line_width = 0.8
-

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.4_normal.inst.cfg

@@ -1,42 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_plus_ultimaker2_extended_plus_0.4_mm
-weight = 0
-quality_type = normal
-
-[values]
-speed_wall_x = 30
-support_z_distance = 0.26
-raft_interface_line_spacing = 1
-cool_min_speed = 8
-cool_fan_speed = 50
-wall_thickness = 1.14
-raft_margin = 15
-speed_layer_0 = 15
-raft_airgap = 0.37
-infill_overlap = 5
-layer_height = 0.15
-raft_interface_line_width = 0.8
-top_bottom_thickness = 1.5
-cool_fan_speed_min = 25
-raft_surface_line_width = 0.38
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 20
-support_enable = True
-speed_wall_0 = 20
-adhesion_type = raft
-infill_sparse_density = 30
-layer_0_z_overlap = 0.22
-cool_min_layer_time = 3
-speed_print = 35
-line_width = 0.38
-support_angle = 45
-raft_base_line_spacing = 1.6
-raft_base_line_width = 0.8
-

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.6_draft.inst.cfg

@@ -1,46 +0,0 @@
-[general]
-version = 2
-name = Draft Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_plus_ultimaker2_extended_plus_0.6_mm
-weight = 0
-quality_type = draft
-
-[values]
-support_xy_distance = 0.6
-speed_travel = 150
-support_z_distance = 0.22
-speed_wall_x = 25
-cool_min_speed = 8
-cool_fan_speed = 45
-raft_surface_thickness = 0.2
-raft_surface_line_width = 0.57
-raft_interface_line_spacing = 1.4
-raft_margin = 15
-speed_layer_0 = 30
-raft_airgap = 0.37
-infill_overlap = 5
-layer_height = 0.3
-raft_base_line_spacing = 2.4
-raft_interface_line_width = 1.2
-speed_wall_0 = 20
-cool_fan_speed_min = 25
-wall_thickness = 1.14
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 20
-support_enable = True
-infill_sparse_density = 35
-top_bottom_thickness = 0.75
-adhesion_type = raft
-line_width = 0.57
-layer_0_z_overlap = 0.22
-raft_base_line_width = 1.2
-speed_print = 25
-support_line_distance = 2.85
-support_angle = 45
-cool_min_layer_time = 3
-

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.6_normal.inst.cfg

@@ -1,46 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_plus_ultimaker2_extended_plus_0.6_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_xy_distance = 0.6
-speed_travel = 150
-support_z_distance = 0.22
-speed_wall_x = 35
-cool_min_speed = 8
-cool_fan_speed = 45
-raft_surface_thickness = 0.2
-raft_surface_line_width = 0.57
-raft_interface_line_spacing = 1.4
-raft_margin = 15
-speed_layer_0 = 30
-raft_airgap = 0.37
-infill_overlap = 5
-layer_height = 0.22
-raft_base_line_spacing = 2.4
-raft_interface_line_width = 1.2
-speed_wall_0 = 30
-cool_fan_speed_min = 25
-wall_thickness = 1.14
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 20
-support_enable = True
-infill_sparse_density = 35
-top_bottom_thickness = 0.75
-adhesion_type = raft
-line_width = 0.57
-layer_0_z_overlap = 0.22
-raft_base_line_width = 1.2
-speed_print = 35
-support_line_distance = 2.85
-support_angle = 45
-cool_min_layer_time = 3
-

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.8_draft.inst.cfg

@@ -1,40 +0,0 @@
-[general]
-version = 2
-name = Draft Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_plus_ultimaker2_extended_plus_0.8_mm
-weight = 0
-quality_type = draft
-
-[values]
-support_z_distance = 0.26
-speed_wall_x = 25
-cool_fan_speed = 50
-raft_surface_thickness = 0.2
-raft_surface_line_width = 0.7
-raft_interface_line_spacing = 1.8
-raft_airgap = 0.37
-infill_overlap = 5
-layer_height = 0.3
-raft_interface_line_width = 1.6
-top_bottom_thickness = 1.2
-cool_fan_speed_min = 25
-brim_line_count = 10
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 20
-support_enable = True
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 40
-layer_0_z_overlap = 0.22
-raft_base_line_width = 1.6
-speed_print = 25
-speed_wall_0 = 20
-support_angle = 45
-cool_min_layer_time = 3
-wall_thickness = 2.1
-

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.8_normal.inst.cfg

@@ -1,40 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_plus_ultimaker2_extended_plus_0.8_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_z_distance = 0.26
-speed_wall_x = 30
-cool_fan_speed = 50
-raft_surface_thickness = 0.2
-raft_surface_line_width = 0.7
-raft_interface_line_spacing = 1.8
-raft_airgap = 0.37
-infill_overlap = 5
-layer_height = 0.2
-raft_interface_line_width = 1.6
-top_bottom_thickness = 1.2
-cool_fan_speed_min = 25
-brim_line_count = 10
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 20
-support_enable = True
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 40
-layer_0_z_overlap = 0.22
-raft_base_line_width = 1.6
-speed_print = 30
-speed_wall_0 = 20
-support_angle = 45
-cool_min_layer_time = 3
-wall_thickness = 2.1
-

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.25_high.inst.cfg

@@ -1,43 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_nylon_ultimaker2_extended_plus_0.25_mm
-weight = 0
-quality_type = high
-
-[values]
-support_xy_distance = 0.6
-speed_travel = 150
-cool_fan_speed = 60
-support_z_distance = 0.45
-speed_wall_x = 40
-cool_min_speed = 15
-raft_surface_line_width = 0.2
-raft_interface_line_width = 0.5
-brim_line_count = 8
-raft_margin = 15
-speed_layer_0 = 30
-raft_airgap = 0.15
-infill_overlap = 5
-layer_height = 0.06
-raft_interface_line_spacing = 0.7
-speed_support = 40
-top_bottom_thickness = 1.2
-cool_fan_speed_min = 35
-wall_thickness = 1
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 35
-support_enable = True
-retraction_hop_enabled = 0.2
-speed_wall_0 = 20
-adhesion_type = raft
-infill_sparse_density = 25
-layer_0_z_overlap = 0.1
-raft_base_line_width = 0.5
-speed_print = 40
-

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.25_normal.inst.cfg

@@ -1,43 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_nylon_ultimaker2_extended_plus_0.25_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_xy_distance = 0.6
-speed_travel = 150
-cool_fan_speed = 60
-support_z_distance = 0.45
-speed_wall_x = 40
-cool_min_speed = 15
-raft_surface_line_width = 0.2
-raft_interface_line_width = 0.5
-brim_line_count = 8
-raft_margin = 15
-speed_layer_0 = 30
-raft_airgap = 0.15
-infill_overlap = 5
-layer_height = 0.1
-raft_interface_line_spacing = 0.7
-speed_support = 40
-top_bottom_thickness = 1.2
-cool_fan_speed_min = 35
-wall_thickness = 1
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 35
-support_enable = True
-retraction_hop_enabled = 0.2
-speed_wall_0 = 20
-adhesion_type = raft
-infill_sparse_density = 25
-layer_0_z_overlap = 0.1
-raft_base_line_width = 0.5
-speed_print = 40
-

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.4_fast.inst.cfg

@@ -1,42 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_nylon_ultimaker2_extended_plus_0.4_mm
-weight = 0
-quality_type = fast
-
-[values]
-support_xy_distance = 0.6
-speed_travel = 150
-support_z_distance = 0.45
-raft_interface_line_spacing = 1
-cool_min_speed = 15
-raft_surface_thickness = 0.15
-raft_surface_line_width = 0.5
-speed_layer_0 = 30
-raft_airgap = 0.57
-infill_overlap = 5
-layer_height = 0.2
-raft_interface_line_width = 0.8
-top_bottom_thickness = 0.75
-cool_fan_speed_min = 35
-wall_thickness = 1.06
-support_pattern = lines
-support_infill_rate = 25
-speed_topbottom = 20
-support_enable = True
-speed_wall = 40
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 30
-layer_0_z_overlap = 0.22
-raft_base_line_spacing = 1.6
-speed_print = 45
-support_angle = 45
-cool_min_layer_time = 3
-raft_base_line_width = 0.8
-

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.4_normal.inst.cfg

@@ -1,41 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_nylon_ultimaker2_extended_plus_0.4_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_xy_distance = 0.6
-speed_travel = 150
-support_z_distance = 0.45
-raft_interface_line_spacing = 1
-cool_min_speed = 15
-raft_surface_thickness = 0.15
-raft_surface_line_width = 0.5
-speed_layer_0 = 30
-raft_airgap = 0.57
-infill_overlap = 5
-layer_height = 0.15
-raft_interface_line_width = 0.8
-top_bottom_thickness = 0.75
-cool_fan_speed_min = 35
-wall_thickness = 1.06
-support_pattern = lines
-support_infill_rate = 25
-support_enable = True
-speed_wall = 40
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 30
-layer_0_z_overlap = 0.22
-raft_base_line_spacing = 1.6
-speed_print = 45
-support_angle = 45
-cool_min_layer_time = 3
-raft_base_line_width = 0.8
-

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.6_fast.inst.cfg

@@ -1,46 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_nylon_ultimaker2_extended_plus_0.6_mm
-weight = 0
-quality_type = fast
-
-[values]
-support_xy_distance = 0.7
-speed_travel = 150
-speed_wall_x = 40
-cool_min_speed = 15
-support_top_distance = 0.55
-raft_surface_line_width = 0.6
-raft_surface_thickness = 0.15
-brim_line_count = 8
-speed_layer_0 = 30
-raft_interface_line_spacing = 1.4
-infill_overlap = 5
-layer_height = 0.3
-raft_interface_line_width = 1.2
-speed_support = 40
-speed_wall_0 = 15
-cool_fan_speed_min = 35
-wall_thickness = 1.2
-support_pattern = lines
-support_infill_rate = 25
-speed_topbottom = 35
-support_enable = True
-retraction_hop_enabled = 0.2
-support_bottom_distance = 0.55
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 35
-layer_0_z_overlap = 0.22
-top_bottom_thickness = 1.2
-speed_print = 55
-raft_airgap = 0.44
-support_angle = 45
-raft_base_line_spacing = 2.4
-raft_base_line_width = 1.2
-

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.6_normal.inst.cfg

@@ -1,45 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_nylon_ultimaker2_extended_plus_0.6_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_xy_distance = 0.7
-speed_travel = 150
-support_z_distance = 0.55
-speed_wall_x = 40
-cool_min_speed = 15
-raft_surface_line_width = 0.6
-raft_surface_thickness = 0.15
-brim_line_count = 8
-speed_layer_0 = 30
-raft_interface_line_spacing = 1.4
-infill_overlap = 5
-layer_height = 0.15
-raft_interface_line_width = 1.2
-speed_support = 40
-speed_wall_0 = 15
-cool_fan_speed_min = 35
-wall_thickness = 1.2
-support_pattern = lines
-support_infill_rate = 25
-speed_topbottom = 35
-support_enable = True
-retraction_hop_enabled = 0.2
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 35
-layer_0_z_overlap = 0.22
-top_bottom_thickness = 1.2
-speed_print = 55
-raft_airgap = 0.44
-support_angle = 45
-raft_base_line_spacing = 2.4
-raft_base_line_width = 1.2
-

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.8_draft.inst.cfg

@@ -1,46 +0,0 @@
-[general]
-version = 2
-name = Draft Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_nylon_ultimaker2_extended_plus_0.8_mm
-weight = 0
-quality_type = draft
-
-[values]
-support_xy_distance = 0.75
-speed_travel = 150
-support_z_distance = 0.5
-speed_wall_x = 40
-cool_min_speed = 15
-brim_line_count = 8
-support_top_distance = 0.5
-raft_surface_thickness = 0.2
-wall_thickness = 2.4
-raft_margin = 15
-speed_layer_0 = 30
-raft_airgap = 0.44
-infill_overlap = 5
-layer_height = 0.3
-raft_interface_line_width = 1.6
-speed_support = 40
-speed_wall_0 = 15
-cool_fan_speed_min = 35
-raft_surface_line_width = 0.7
-support_pattern = lines
-support_infill_rate = 25
-speed_topbottom = 35
-support_enable = True
-retraction_hop_enabled = 0.2
-support_bottom_distance = 0.65
-top_bottom_thickness = 1.2
-adhesion_type = raft
-infill_sparse_density = 40
-layer_0_z_overlap = 0.25
-raft_base_line_width = 1.6
-speed_print = 55
-support_angle = 45
-raft_interface_line_spacing = 1.8
-

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.8_normal.inst.cfg

@@ -1,46 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_nylon_ultimaker2_extended_plus_0.8_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_xy_distance = 0.75
-speed_travel = 150
-support_z_distance = 0.5
-speed_wall_x = 40
-cool_min_speed = 15
-brim_line_count = 8
-support_top_distance = 0.5
-raft_surface_thickness = 0.2
-wall_thickness = 2.4
-raft_margin = 15
-speed_layer_0 = 30
-raft_airgap = 0.44
-infill_overlap = 5
-layer_height = 0.2
-raft_interface_line_width = 1.6
-speed_support = 40
-speed_wall_0 = 15
-cool_fan_speed_min = 35
-raft_surface_line_width = 0.7
-support_pattern = lines
-support_infill_rate = 25
-speed_topbottom = 35
-support_enable = True
-retraction_hop_enabled = 0.2
-support_bottom_distance = 0.65
-top_bottom_thickness = 1.2
-adhesion_type = raft
-infill_sparse_density = 40
-layer_0_z_overlap = 0.25
-raft_base_line_width = 1.6
-speed_print = 55
-support_angle = 45
-raft_interface_line_spacing = 1.8
-

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.25_high.inst.cfg

@@ -1,36 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pc_ultimaker2_extended_plus_0.25_mm
-weight = 0
-quality_type = high
-
-[values]
-support_z_distance = 0.19
-raft_interface_line_spacing = 0.7
-cool_min_speed = 15
-cool_fan_speed = 50
-raft_surface_line_width = 0.2
-wall_thickness = 0.88
-raft_airgap = 0.5
-infill_overlap = 5
-layer_height = 0.06
-raft_interface_line_width = 0.5
-cool_fan_speed_min = 0
-brim_line_count = 32
-support_pattern = lines
-support_infill_rate = 20
-support_enable = True
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 25
-layer_0_z_overlap = 0.22
-cool_min_layer_time = 2
-speed_print = 30
-raft_base_line_spacing = 1
-raft_base_line_width = 0.5
-

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.25_normal.inst.cfg

@@ -1,36 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pc_ultimaker2_extended_plus_0.25_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_z_distance = 0.19
-raft_interface_line_spacing = 0.7
-cool_min_speed = 15
-cool_fan_speed = 50
-raft_surface_line_width = 0.2
-wall_thickness = 0.88
-raft_airgap = 0.5
-infill_overlap = 5
-layer_height = 0.1
-raft_interface_line_width = 0.5
-cool_fan_speed_min = 0
-brim_line_count = 32
-support_pattern = lines
-support_infill_rate = 20
-support_enable = True
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 25
-layer_0_z_overlap = 0.22
-cool_min_layer_time = 2
-speed_print = 30
-raft_base_line_spacing = 1
-raft_base_line_width = 0.5
-

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.4_fast.inst.cfg

@@ -1,37 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pc_ultimaker2_extended_plus_0.4_mm
-weight = 0
-quality_type = fast
-
-[values]
-speed_wall_x = 30
-support_z_distance = 0.19
-raft_airgap = 0.57
-cool_min_speed = 8
-cool_fan_speed = 50
-raft_interface_line_spacing = 1
-infill_overlap = 5
-layer_height = 0.2
-raft_interface_line_width = 0.8
-speed_wall_0 = 20
-cool_fan_speed_min = 0
-wall_thickness = 1.2
-support_pattern = lines
-support_infill_rate = 20
-support_enable = True
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 30
-layer_0_z_overlap = 0.22
-cool_min_layer_time = 3
-speed_print = 45
-support_angle = 45
-raft_base_line_spacing = 1.6
-raft_base_line_width = 0.8
-

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.4_normal.inst.cfg

@@ -1,37 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pc_ultimaker2_extended_plus_0.4_mm
-weight = 0
-quality_type = normal
-
-[values]
-speed_wall_x = 30
-support_z_distance = 0.19
-raft_airgap = 0.57
-cool_min_speed = 8
-cool_fan_speed = 50
-raft_interface_line_spacing = 1
-infill_overlap = 5
-layer_height = 0.1
-raft_interface_line_width = 0.8
-speed_wall_0 = 20
-cool_fan_speed_min = 0
-wall_thickness = 1.2
-support_pattern = lines
-support_infill_rate = 20
-support_enable = True
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 30
-layer_0_z_overlap = 0.22
-cool_min_layer_time = 3
-speed_print = 45
-support_angle = 45
-raft_base_line_spacing = 1.6
-raft_base_line_width = 0.8
-

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.6_fast.inst.cfg

@@ -1,44 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pc_ultimaker2_extended_plus_0.6_mm
-weight = 0
-quality_type = fast
-
-[values]
-speed_travel = 150
-support_z_distance = 0.21
-speed_wall_x = 40
-cool_min_speed = 8
-cool_fan_speed = 50
-raft_surface_thickness = 0.15
-raft_surface_line_width = 0.6
-raft_interface_line_spacing = 1.4
-speed_layer_0 = 30
-raft_airgap = 0.52
-infill_overlap = 5
-layer_height = 0.3
-raft_interface_line_width = 1.2
-raft_margin = 15
-cool_fan_speed_min = 0
-wall_thickness = 1.06
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 20
-support_enable = True
-top_bottom_thickness = 0.75
-adhesion_type = raft
-infill_sparse_density = 35
-layer_0_z_overlap = 0.22
-raft_base_line_spacing = 2.4
-speed_print = 45
-support_line_distance = 3.5333
-speed_wall_0 = 30
-support_angle = 45
-cool_min_layer_time = 3
-raft_base_line_width = 1.2
-

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.6_normal.inst.cfg

@@ -1,44 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pc_ultimaker2_extended_plus_0.6_mm
-weight = 0
-quality_type = normal
-
-[values]
-speed_travel = 150
-support_z_distance = 0.21
-speed_wall_x = 40
-cool_min_speed = 8
-cool_fan_speed = 50
-raft_surface_thickness = 0.15
-raft_surface_line_width = 0.6
-raft_interface_line_spacing = 1.4
-speed_layer_0 = 30
-raft_airgap = 0.52
-infill_overlap = 5
-layer_height = 0.15
-raft_interface_line_width = 1.2
-raft_margin = 15
-cool_fan_speed_min = 0
-wall_thickness = 1.06
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 20
-support_enable = True
-top_bottom_thickness = 0.75
-adhesion_type = raft
-infill_sparse_density = 35
-layer_0_z_overlap = 0.22
-raft_base_line_spacing = 2.4
-speed_print = 45
-support_line_distance = 3.5333
-speed_wall_0 = 30
-support_angle = 45
-cool_min_layer_time = 3
-raft_base_line_width = 1.2
-

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.8_draft.inst.cfg

@@ -1,37 +0,0 @@
-[general]
-version = 2
-name = Draft Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pc_ultimaker2_extended_plus_0.8_mm
-weight = 0
-quality_type = draft
-
-[values]
-support_z_distance = 0.26
-raft_airgap = 0.47
-cool_fan_speed = 50
-raft_surface_line_width = 0.7
-raft_surface_thickness = 0.2
-brim_line_count = 10
-raft_interface_line_spacing = 1.8
-infill_overlap = 5
-layer_height = 0.5
-raft_interface_line_width = 1.6
-top_bottom_thickness = 2.0
-cool_fan_speed_min = 25
-wall_thickness = 2.1
-support_pattern = lines
-support_infill_rate = 20
-support_enable = True
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 40
-layer_0_z_overlap = 0.22
-raft_base_line_width = 1.6
-speed_print = 40
-support_angle = 45
-cool_min_layer_time = 3
-

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.8_normal.inst.cfg

@@ -1,37 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pc_ultimaker2_extended_plus_0.8_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_z_distance = 0.26
-raft_airgap = 0.47
-cool_fan_speed = 50
-raft_surface_line_width = 0.7
-raft_surface_thickness = 0.2
-brim_line_count = 10
-raft_interface_line_spacing = 1.8
-infill_overlap = 5
-layer_height = 0.2
-raft_interface_line_width = 1.6
-top_bottom_thickness = 1.2
-cool_fan_speed_min = 25
-wall_thickness = 2.1
-support_pattern = lines
-support_infill_rate = 20
-support_enable = True
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 40
-layer_0_z_overlap = 0.22
-raft_base_line_width = 1.6
-speed_print = 40
-support_angle = 45
-cool_min_layer_time = 3
-

resources/quality/ultimaker2_extended_plus/um2ep_pla_0.25_normal.inst.cfg

@@ -1,19 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pla_ultimaker2_extended_plus_0.25_mm
-weight = -2
-quality_type = high
-
-[values]
-layer_height = 0.06
-wall_thickness = 0.88
-top_bottom_thickness = 0.72
-infill_sparse_density = 22
-speed_print = 30
-cool_min_layer_time = 5
-cool_min_speed = 10

resources/quality/ultimaker2_extended_plus/um2ep_pla_0.4_fast.inst.cfg

@@ -1,21 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pla_ultimaker2_extended_plus_0.4_mm
-weight = -1
-quality_type = fast
-
-[values]
-layer_height = 0.15
-wall_thickness = 0.7
-top_bottom_thickness = 0.75
-infill_sparse_density = 18
-speed_print = 60
-speed_travel = 150
-speed_layer_0 = 30
-cool_min_layer_time = 5
-cool_min_speed = 10

resources/quality/ultimaker2_extended_plus/um2ep_pla_0.4_high.inst.cfg

@@ -1,19 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pla_ultimaker2_extended_plus_0.4_mm
-weight = -3
-quality_type = high
-
-[values]
-layer_height = 0.06
-wall_thickness = 1.05
-top_bottom_thickness = 0.72
-infill_sparse_density = 22
-speed_print = 50
-cool_min_layer_time = 5
-cool_min_speed = 10

resources/quality/ultimaker2_extended_plus/um2ep_pla_0.4_normal.inst.cfg

@@ -1,19 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pla_ultimaker2_extended_plus_0.4_mm
-weight = -2
-quality_type = normal
-
-[values]
-layer_height = 0.1
-wall_thickness = 1.05
-top_bottom_thickness = 0.8
-infill_sparse_density = 20
-speed_print = 50
-cool_min_layer_time = 5
-cool_min_speed = 10

resources/quality/ultimaker2_extended_plus/um2ep_pla_0.6_normal.inst.cfg

@@ -1,19 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-material = generic_pla_ultimaker2_extended_plus_0.6_mm
-type = quality
-weight = -2
-quality_type = normal
-
-[values]
-layer_height = 0.15
-wall_thickness = 1.59
-top_bottom_thickness = 1.2
-infill_sparse_density = 20
-speed_print = 55
-cool_min_layer_time = 5
-cool_min_speed = 10

resources/quality/ultimaker2_extended_plus/um2ep_pla_0.8_normal.inst.cfg

@@ -1,19 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-material = generic_pla_ultimaker2_extended_plus_0.8_mm
-type = quality
-weight = -2
-quality_type = fast
-
-[values]
-layer_height = 0.2
-wall_thickness = 2.1
-top_bottom_thickness = 1.2
-infill_sparse_density = 20
-speed_print = 40
-cool_min_layer_time = 5
-cool_min_speed = 10

resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.25_high.inst.cfg

@@ -1,42 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_tpu_ultimaker2_extended_plus_0.25_mm
-weight = 0
-quality_type = high
-
-[values]
-support_xy_distance = 0.6
-cool_min_speed = 15
-support_infill_rate = 25
-speed_wall_0 = 15
-layer_0_z_overlap = 0.1
-cool_min_layer_time = 7
-speed_layer_0 = 30
-speed_print = 40
-wall_thickness = 0.88
-support_enable = True
-speed_topbottom = 35
-raft_surface_line_width = 0.2
-raft_base_line_spacing = 1
-top_bottom_thickness = 1.2
-layer_height = 0.06
-support_angle = 45
-infill_sparse_density = 10
-cool_fan_speed = 60
-speed_travel = 150
-speed_support = 40
-support_z_distance = 0.45
-cool_fan_speed_min = 35
-brim_line_count = 8
-retraction_hop_enabled = 0.2
-speed_wall_x = 38
-raft_airgap = 0.2
-raft_interface_line_spacing = 1
-adhesion_type = brim
-raft_interface_line_width = 0.2
-

resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.4_normal.inst.cfg

@@ -1,39 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_tpu_ultimaker2_extended_plus_0.4_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_xy_distance = 0.65
-speed_travel = 150
-support_z_distance = 0.45
-speed_wall_x = 35
-cool_min_speed = 15
-cool_fan_speed = 60
-retraction_hop_enabled = 0.2
-brim_line_count = 8
-speed_layer_0 = 30
-raft_interface_line_spacing = 1
-raft_base_line_spacing = 2
-speed_support = 40
-raft_margin = 12
-cool_fan_speed_min = 35
-wall_thickness = 1.05
-support_infill_rate = 25
-speed_topbottom = 35
-support_enable = True
-speed_wall_0 = 20
-adhesion_type = brim
-infill_sparse_density = 10
-top_bottom_thickness = 1.2
-speed_print = 40
-support_angle = 45
-cool_min_layer_time = 10
-raft_base_line_width = 0.8
-

resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.6_fast.inst.cfg

@@ -1,44 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_tpu_ultimaker2_extended_plus_0.6_mm
-weight = 0
-quality_type = fast
-
-[values]
-support_xy_distance = 0.7
-raft_base_line_width = 0.6
-cool_min_speed = 15
-line_width = 0.57
-support_infill_rate = 25
-speed_wall_0 = 15
-wall_thickness = 1.14
-raft_base_line_spacing = 1.2
-speed_layer_0 = 30
-raft_margin = 15
-speed_travel = 150
-raft_surface_line_width = 0.5
-layer_height = 0.12
-raft_interface_line_width = 0.57
-speed_print = 45
-top_bottom_thickness = 1.2
-speed_topbottom = 35
-layer_0_z_overlap = 0.12
-support_angle = 45
-infill_sparse_density = 10
-cool_fan_speed = 60
-speed_support = 40
-support_z_distance = 0.45
-cool_fan_speed_min = 35
-brim_line_count = 8
-retraction_hop_enabled = 0.2
-speed_wall_x = 40
-support_enable = True
-raft_interface_line_spacing = 1.2
-adhesion_type = brim
-raft_airgap = 0.24
-